1
|
Enhancing the Life Cycle of Zinc-Iodine Batteries in Ionic Liquid-Based Electrolyte. Angew Chem Int Ed Engl 2024:e202405244. [PMID: 38711382 DOI: 10.1002/anie.202405244] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/20/2024] [Revised: 04/26/2024] [Accepted: 05/02/2024] [Indexed: 05/08/2024]
Abstract
Aqueous zinc-iodine (Zn-I2) batteries are gaining significant attention due to their low-cost, high safety and high theoretical capacity. Nevertheless, their long cycle and durability have been hampered due to the use of aqueous media that overtime lead to Zn dendrite formation, hydrogen evolution reaction, and polyiodide dissolution. Xiao et. al., recently reported the addition of an imidazolium-based ionic liquid (IL), to an aqueous electrolyte, that plays a key role in modifying the solvation of Zn2+ ions in the bulk electrolyte and the inner Helmotlz plane, which eliminates free H2O molecules to be present on the Zn anode surface. UV/Vis and NMR spectroscopy also indicates a strong interaction between imidazolium cation [EMIM]+ and I3-, thereby reducing polyiodide shuttling and enhancing the cycle life of the battery. Overall, a capacity decay rate of only 0.01 % per cycle after over 18,000 cycles at 4 Ag-1, is observed making the use of IL additives in aqueous electrolytes highly promising candidates for Zn-I2 batteries.
Collapse
|
2
|
Innovative Strategy for Developing PEDOT Composite Scaffold for Reversible Oxygen Reduction Reaction. J Phys Chem Lett 2024; 15:4851-4857. [PMID: 38669215 PMCID: PMC11089567 DOI: 10.1021/acs.jpclett.4c00482] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/15/2024] [Revised: 04/15/2024] [Accepted: 04/15/2024] [Indexed: 04/28/2024]
Abstract
Metal-air batteries are an emerging technology with great potential to satisfy the demand for energy in high-consumption applications. However, this technology is still in an early stage, facing significant challenges such as a low cycle life that currently limits its practical use. Poly(3,4-ethylenedioxythiophene) (PEDOT) conducting polymer has already demonstrated its efficiency as catalyst for oxygen reduction reaction (ORR) discharge as an alternative to traditional expensive and nonsustainable metal catalysts. Apart from that, in most electrochemical processes, three phenomena are needed: redox activity and electronic and ionic conduction. Material morphology is important to maximize the contact area and optimize the 3 mechanisms to obtain high-performance devices. In this work, porous scaffolds of PEDOT-organic ionic plastic crystal (OIPC) are prepared through vapor phase polymerization to be used as porous self-standing cathodes. The scaffolds, based on abundant elements, showed good thermal stability (200 °C), with potential ORR reversible electrocatalytic activity: 60% of Coulombic efficiency in aqueous medium after 200 cycles.
Collapse
|
3
|
Bio-based ether solvent and ionic liquid electrolyte for sustainable sodium-air batteries. Faraday Discuss 2024; 248:29-47. [PMID: 37814915 DOI: 10.1039/d3fd00096f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/11/2023]
Abstract
Sodium-air batteries (SABs) are receiving considerable attention for the development of next generation battery alternatives due to their high theoretical energy density (up to 1105 W h kg-1). However, most of the studies on this technology are still based on organic solvents; in particular, diglyme, which is highly flammable and toxic for the unborn child. To overcome these safety issues, this research investigates the first use of a branched ether solvent 1,2,3-trimethoxypropane (TMP) as an alternative electrolyte to diglyme for SABs. Through this work, the reactivity of the central tertiary carbon in TMP towards bare sodium metal was identified, while the addition of N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C4mpyr][TFSI]) as a co-solvent proved to be an effective strategy to limit the reactivity. Moreover, a Na-β-alumina disk was employed for anode protection, to separate the TMP-based electrolyte from the sodium metal. The new cell design resulted in improved cell performance: discharge capacities of up to 1.92 and 2.31 mA h cm-2 were achieved for the 16.6 mol% NaTFSI in TMP and 16.6 mol% NaTFSI in TMP/[C4mpyr][TFSI] compositions, respectively. By means of SEM, Raman and 23Na NMR techniques, NaO2 cubes were identified to be the major discharge product for both electrolyte compositions. Moreover, the hybrid electrolyte was shown to hinder the formation of side-products during discharge - the ratio of NaO2 to side-products in the hybrid electrolyte was 2.4 compared with 0.8 for the TMP-based electrolyte - and a different charge mechanism for the dissolution of NaO2 cubes for each electrolyte was observed. The findings of this work demonstrate the high potential of TMP as a base solvent for SABs, and the importance of careful electrolyte composition design in order to step towards greener and less toxic batteries.
Collapse
|
4
|
Biobased Acrylic Latexes/Sodium Carboxymethyl Cellulose Aqueous Binders for Lithium-Ion NMC 811 Cathodes. ACS APPLIED POLYMER MATERIALS 2024; 6:1236-1244. [PMID: 38299122 PMCID: PMC10825816 DOI: 10.1021/acsapm.3c02167] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/13/2023] [Revised: 11/30/2023] [Accepted: 12/01/2023] [Indexed: 02/02/2024]
Abstract
The increasing demands for sustainable energy storage technologies have prompted extensive research in the development of eco-friendly materials for lithium-ion batteries (LIBs). This research article presents the design of biobased latexes, which are fluorine-free and rely on renewable resources, based on isobornyl methacrylate (IBOMA) and 2-octyl acrylate (2OA) to be used as binders in batteries. Three different compositions of latexes were investigated, varying the ratio of IBOMA and 2OA: (1) Poly2OA homopolymer, (2) Poly(2OA0,6-co-IBOMA0,4) random copolymer, and (3) PolyIBOMA homopolymer. The combination of the two monomers provided a balance between rigidity from the hard monomer (IBOMA) and flexibility from the soft one (2OA). The study evaluated the performance of the biobased latexes using sodium carboxymethyl cellulose (CMC) as a thickener and cobinder by fabricating LiNi0.8Mn0.1Co0.1O2 (NMC 811) cathodes. Also, to compare with the state of the art, organic processed PVDF electrodes were prepared. Among aqueous slurries, rheological analysis showed that the CMC + Poly(2OA0,6-co-IBOMA0,4) binder system resulted in the most stable and well-dispersed slurries. Also, the electrodes prepared with this latex demonstrated enhanced adhesion (210 ± 9 N m-1) and reduced cracks compared to other aqueous compositions. Electrochemical characterization revealed that the aqueous processed cathodes using the CMC + Poly(2OA0,6-co-IBOMA0,4) biobased latex displayed higher specific capacities than the control with no latex at high C-rates (100.3 ± 2.1 vs 64.5 ± 0.8 mAh g-1 at 5C) and increased capacity retention after 90 cycles at 0.5C (84% vs 81% for CMC with no latex). Overall, the findings of this study suggest that biobased latexes, specifically the CMC + Poly(2OA0,6-co-IBOMA0,4) composition, are promising as environmentally friendly binders for NMC 811 cathodes, contributing to the broader goal of achieving sustainable energy storage systems.
Collapse
|
5
|
Carrageenans as Sustainable Water-Processable Binders for High-Voltage NMC811 Cathodes. ACS APPLIED ENERGY MATERIALS 2023; 6:8616-8625. [PMID: 37654436 PMCID: PMC10466266 DOI: 10.1021/acsaem.3c01662] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/05/2023] [Accepted: 08/02/2023] [Indexed: 09/02/2023]
Abstract
Poly(vinylidene fluoride) (PVDF) is the most common binder for cathode electrodes in lithium-ion batteries. However, PVDF is a fluorinated compound and requires toxic N-methyl-2-pyrrolidone (NMP) as a solvent during the slurry preparation, making the electrode fabrication process environmentally unfriendly. In this study, we propose the use of carrageenan biopolymers as a sustainable source of water-processable binders for high-voltage NMC811 cathodes. Three types of carrageenan (Carr) biopolymers were investigated, with one, two, or three sulfonate groups (SO3-), namely, kappa, iota, and lambda carrageenans, respectively. In addition to the nature of carrageenans, this article also reports the optimization of the cathode formulations, which were prepared by using between 5 wt % of the binder to a lower amount of 2 wt %. Processing of the aqueous slurries and the nature of the binder, in terms of the morphology and electrochemical performance of the electrodes, were also investigated. The Carr binder with 3SO3- groups (3SO3-Carr) exhibited the highest discharge capacities, delivering 133.1 mAh g-1 at 3C and 105.0 mAh g-1 at 5C, which was similar to the organic-based PVDF electrode (136.1 and 108.7 mAh g-1, respectively). Furthermore, 3SO3-Carr reached an outstanding capacity retention of 91% after 90 cycles at 0.5C, which was attributed to a homogeneous NMC811 and a conductive carbon particle dispersion, superior adhesion strength to the current collector (17.3 ± 0.7 N m-1 vs 0.3 ± 0.1 N m-1 for PVDF), and reduced charge-transfer resistance. Postmortem analysis unveiled good preservation of the NMC811 particles, while the 1SO3-Carr and 2SO3-Carr electrodes showed damaged morphologies.
Collapse
|
6
|
Enhanced Dissolution of Metal Oxides in Hydroxylated Solvents - Towards Application in Lithium-Ion Battery Leaching. CHEMSUSCHEM 2023; 16:e202300455. [PMID: 37317672 DOI: 10.1002/cssc.202300455] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/29/2023] [Revised: 05/16/2023] [Indexed: 06/16/2023]
Abstract
The recovery of critical metals from spent lithium-ion batteries (LIBs) is rapidly growing. Current methods are energy-intensive and hazardous, while alternative solvent-based strategies require more studies on their 'green' character, metal dissolution mechanism and industrial applicability. Herein, we bridged this gap by studying the effect of dilute HCl solutions in hydroxylated solvents to dissolve Co, Ni and Mn oxides. Ethylene glycol emerged consistently as the most effective solvent, dissolving up to four times more Co and Ni oxides than using aqueous acidic media, attributed to improved chloro-complex formation and solvent effects. These effects had a significant contribution compared to acid type and concentration. The highest Co dissolution (0.27 M) was achieved in 0.5 M HCl in 25 % (v/v) glycerol in water, using less acid and a significant amount of water compared to other solvent systems, as well as mild temperatures (40 °C). This solvent was applied to dissolve battery cathode material, achieving 100 % dissolution of Co and Mn and 94 % dissolution of Ni, following what was concluded to be a mixed mechanism. These results offer a simple alternative to current leaching processes, reducing acid consumption, enhancing atomic efficiency, and paving the way for optimized industrial hydrometallurgical processes leaning to 'greener' strategies.
Collapse
|
7
|
Removal of polyvinylidene fluoride binder and other organics for enhancing the leaching efficiency of lithium and cobalt from black mass. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2023; 343:118205. [PMID: 37235989 DOI: 10.1016/j.jenvman.2023.118205] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/17/2023] [Revised: 05/16/2023] [Accepted: 05/17/2023] [Indexed: 05/28/2023]
Abstract
The agglomeration and encapsulation of recoverable materials of interest (e.g. metals and graphite) as a result of the presence of polyvinylidene fluoride (PVDF) in spent lithium-ion batteries (LIBs) with mixed chemistries (black mass) lower the extraction efficiency of metals. In this study, organic solvents and alkaline solutions were used as non-toxic reagents to investigate the removal of a PVDF binder from a black mass. The results demonstrated that 33.1%, 31.4%, and 31.4% of the PVDF were removed using dimethylformamide (DMF), dimethylacetamide (DMAc), and dimethyl sulfoxide (DMSO) at 150, 160, and 180 °C, respectively. Under these conditions, the peel-off efficiencies for DMF, DMAc, and DMSO were 92.9%, 85.3%, and approximately 92.9%, respectively. Using tetrabutylammonium bromide (TBAB) as a catalyst and 5 M sodium hydroxide (NaOH) at room temperature (RT- 21 °C-23 °C), 50.3% of PVDF and other organic compounds were eliminated. The removal efficiency was enhanced to approximately 60.5% when the temperature was raised to 80 °C using NaOH. Using 5 M potassium hydroxide at RT in a TBAB-containing solution, ca. 32.8% removal efficiency was obtained; raising the temperature to 80 °C further enhanced the removal efficiency to almost 52.7%. The peel-off efficiency was 100% for both alkaline solutions. Lithium extraction increased from 47.2% to 78.7% following treatment with DMSO and to 90.1% following treatment with NaOH via leaching black mass (2 M sulfuric acid, solid-to-liquid ratio (S/L): 100 g L-1 at 50 °C, for 1 h without a reducing agent) before and after removal of the PVDF binder. Cobalt's recovery went from 28.5% to 61.3% with DMSO treatment to 74.4% with NaOH treatment.
Collapse
|
8
|
Unveiling the Impact of the Cations and Anions in Ionic Liquid/Glyme Hybrid Electrolytes for Na-O 2 Batteries. ACS APPLIED MATERIALS & INTERFACES 2022; 14:4022-4034. [PMID: 35019264 DOI: 10.1021/acsami.1c20257] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/19/2023]
Abstract
A series of hybrid electrolytes composed of diglyme and ionic liquids (ILs) have been investigated for Na-O2 batteries, as a strategy to control the growth and purity of the discharge products during battery operation. The dependence of chemical composition of the ILs on the size, purity, and distribution of the discharge products has been evaluated using a wide range of experimental and spectroscopic techniques. The morphology and composition of the discharge products found in the Na-O2 cells have a complex dependence on the physicochemical properties of the electrolyte as well as the speciation of the Na+ and superoxide radical anion. All of these factors control the nucleation and growth phenomena as well as electrolyte stability. Smaller discharge particle sizes and largely homogeneous (2.7 ± 0.5 μm) sodium superoxide (NaO2) crystals with only 9% of side products were found in the hybrid electrolyte containing the pyrrolidinium IL with a linear alkyl chain. The long-term cyclability of Na-O2 batteries with high Coulombic efficiency (>90%) was obtained for this electrolyte with fewer side products (20 cycles at 0.5 mA h cm-2). In contrast, rapid failure was observed with the use of the phosphonium-based electrolyte, which strongly stabilizes the superoxide anion. A high discharge capacity (4.46 mA h cm-2) was obtained for the hybrid electrolyte containing the pyrrolidinium-based IL bearing a linear alkyl chain with a slightly lower value (3.11 mA h cm-2) being obtained when the hybrid electrolyte contained similar pyrrolidinium-based IL bearing an alkoxy chain.
Collapse
|
9
|
Stabilisation of the superoxide anion in bis(fluorosulfonyl)imide (FSI) ionic liquid by small chain length phosphonium cations: Voltammetric, DFT modelling and spectroscopic perspectives. Electrochem commun 2021. [DOI: 10.1016/j.elecom.2021.107029] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022] Open
|
10
|
High Current Cycling in a Superconcentrated Ionic Liquid Electrolyte to Promote Uniform Li Morphology and a Uniform LiF-Rich Solid Electrolyte Interphase. ACS APPLIED MATERIALS & INTERFACES 2020; 12:42236-42247. [PMID: 32877167 DOI: 10.1021/acsami.0c09074] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
High-energy-density systems with fast charging rates and suppressed dendrite growth are critical for the implementation of efficient and safe next-generation advanced battery technologies such as those based on Li metal. However, there are few studies that investigate reliable cycling of Li metal electrodes under high-rate conditions. Here, by employing a superconcentrated ionic liquid (IL) electrolyte, we highlight the effect of Li salt concentration and applied current density on the resulting Li deposit morphology and solid electrolyte interphase (SEI) characteristics, demonstrating exceptional deposition/dissolution rates and efficiency in these systems. Operation at higher current densities enhanced the cycling efficiency, e.g., from 64 ± 3% at 1 mA cm-2 up to 96 ± 1% at 20 mA cm-2 (overpotential <±0.2 V), while resulting in lower electrode resistance and dendrite-free Li morphology. A maximum current density of 50 mA cm-2 resulted in 88 ± 3% cycling efficiency, displaying tolerance for high overpotentials at the Ni working electrode (0.5 V). X-ray photoelectron microscopy (XPS), time-of-flight secondary-ion mass spectroscopy (ToF-SIMS), and scanning electron microscopy (SEM) surface measurements revealed that the formation of a stable SEI, rich in LiF and deficient in organic carbon species, coupled with nondendritic and compact Li morphologies enabled enhanced cycling efficiency at higher currents. Reduced dendrite formation at high current is further highlighted by the use of a highly porous separator in coin cell cycling (1 mAh cm-2 at 50 °C), sustaining 500 cycles at 10 mA cm-2.
Collapse
|
11
|
An investigation of commercial carbon air cathode structure in ionic liquid based sodium oxygen batteries. Sci Rep 2020; 10:7123. [PMID: 32346075 PMCID: PMC7188893 DOI: 10.1038/s41598-020-63473-y] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/14/2020] [Accepted: 03/16/2020] [Indexed: 11/25/2022] Open
Abstract
In order to bridge the gap between theoretical and practical energy density in sodium oxygen batteries challenges need to be overcome. In this work, four commercial air cathodes were selected, and the impacts of their morphologies, structure and chemistry on their performance with a pyrrolidinium-based ionic liquid electrolyte are evaluated. The highest discharge capacity was found for a cathode with a pore size ca. 6 nm; this was over 100 times greater than that delivered by a cathode with a pore size less than 2 nm. The air cathode with the highest specific surface area and the presence of a microporous layer (BC39) exhibited the highest specific capacity (0.53 mAh cm−2).
Collapse
|
12
|
Electrochemistry of Neodymium in Phosphonium Ionic Liquids: The Influence of Cation, Water Content, and Mixed Anions. Aust J Chem 2020. [DOI: 10.1071/ch19581] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
Electrodeposition using ionic liquids has emerged as an environmentally friendly approach to recover critical metals, such a neodymium. The investigation of ionic liquid chemistries and compositions is an important part of the move towards efficient neodymium recovery from end-of-life products that needs further research. Thus, in this paper we have investigated a series of phosphonium ionic liquids as potential electrolytic media. Anions such as bis(trifluoromethylsulfonyl)imide (TFSI), dicyanamide (DCA), and triflate (TfO) have been investigated, in combination with short- and long-alkyl-chain phosphonium cations. The work here suggests that [TFSI]– is one of the most promising anions for successful deposition of Nd and that water plays an important role. In contrast, electrochemical behaviour was significantly hindered in the case of DCA ionic liquid, most likely owing to strong coordination between [DCA]– and Nd3+. Mixtures of anions, [TfO]– and [TFSI]–, have also been investigated in this work, resulting in two reduction processes that could be related to a different deposition mechanism involving two steps, as observed in the case of dysprosium or, alternatively, different coordination environments that have distinct deposition potentials. Additionally, we investigated the influence of electrode substrates – glassy carbon and copper. Cu electrodes resulted in the largest current densities and thus were used for subsequent electrodeposition at constant potential. These findings are valuable for optimising the deposition of Nd in order to develop more efficient and inexpensive recycling technologies for rare earth metals.
Collapse
|
13
|
High Coulombic Efficiency Na-O 2 Batteries Enabled by a Bilayer Ionogel/Ionic Liquid. J Phys Chem Lett 2019; 10:7050-7055. [PMID: 31650842 DOI: 10.1021/acs.jpclett.9b02947] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Sodium-oxygen (Na-O2) cells are a promising high energy density storage technology with a theoretical specific energy of 1605 Wh kg-1. However, this technology faces certain challenges in order to achieve both a high practical energy density as well as long-term cycling capability. In this Letter, a superior Coulombic cyclic efficiency, close to 100%, has been demonstrated by the use of a bilayer electrolyte composed of an ionogel and an ionic liquid electrolyte, reported herein for the first time. The presence of the ionogel plays a major role in the prevention of side reactions originating at the anode, providing a promising route to extend cell cycling, whereas the ionic liquid is essential to support high reaction rates at the cathode.
Collapse
|
14
|
Tuning Sodium Interfacial Chemistry with Mixed-Anion Ionic Liquid Electrolytes. ACS APPLIED MATERIALS & INTERFACES 2019; 11:43093-43106. [PMID: 31701752 DOI: 10.1021/acsami.9b12913] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
The interphase layer that forms on either the anode or the cathode is considered to be one of the critical components of a high performing battery. This solid-electrolyte interphase (SEI) layer determines the stability of the electrode in the presence of a given electrolyte as well as the internal resistance of a battery, and hence the overpotential of a cell. In the case of lithium ion batteries where carbonate based electrolytes are used, additives including hexafluorophosphate (PF6), bis-trifluoromethylsulfonimide (TFSI), (fluorosulfonyl)(trifluoromethanesulfonyl)imide (FTFSI), and fluorosulfonimde (FSI) are used to obtain favorable SEI layers. Ionic liquids and salts based on anions containing nitrile groups, including dicyanamide (DCA), offer a less expensive alternative to a fluorinated anion and have also been shown to support stable electrochemistry in lithium and sodium systems. However, longer term cycling leads to the eventual passivation of the electrode, presumed to be due to the instability of the DCA anion. We herein consider the use of a fluorinated anion to control the interfacial electrochemistry and provide a more stable SEI in DCA ILs. We investigate the addition of NaDCA, NaFSI, NaTFSI, and NaFTFSI to the methylpropylpyrrolidinium dicyanamide ([C3mpyr]DCA) ionic liquid. NaFSI was found to generate a more stable SEI layer, as evidenced by extended symmetric cell cycling, while the TFSI and FTFSI salts both lead to thicker, highly passivating surfaces. We use molecular dynamics, infrared spectroscopy and X-ray photoelectron spectroscopy to interrogate and discuss the influence of the anion on the bulk electrolyte, the interfacial electrolyte structure, and the formation of the SEI layer, in order to rationalize the contrasting electrochemical observations.
Collapse
|
15
|
Controlling the Three-Phase Boundary in Na-Oxygen Batteries: The Synergy of Carbon Nanofibers and Ionic Liquid. CHEMSUSCHEM 2019; 12:4054-4063. [PMID: 31301269 DOI: 10.1002/cssc.201901351] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/21/2019] [Revised: 07/11/2019] [Indexed: 06/10/2023]
Abstract
A series of electrospun binder-free carbon nanofiber (CNF) mats have been studied as air cathodes for Na-oxygen batteries using a pyrrolidinium-based electrolyte and compared with the commercial air cathode Toray 090. A tenfold increase in the discharge capacity is attained when using CNFs in comparison with Toray 090, affording a discharge capacity of 1.53 mAh cm-2 at a high discharge rate of 0.63 mA cm-2 . The good specific discharge and charge capacities of these CNFs are determined by the void space and the highly accessible surface of the carbon fiber. Furthermore, a threefold increase has been attained in terms of specific capacity by controlling the flooding of the air cathode and hence the location of the three-phase boundary within the CNF mat. The enhancement in performance has been correlated to the morphology, composition, distribution, and location of the discharge products. Sodium superoxide and peroxide were identified as the discharge products and, more importantly, the common side reaction discharge products, which are known to be detrimental to battery performance (including sodium fluoride, sodium hydroxide, and formate), were not observed, exemplifying the stability of the pyrrolidinium-based electrolyte and these binder-free CNF air cathodes.
Collapse
|
16
|
Application of a water-soluble cobalt redox couple in free-standing cellulose films for thermal energy harvesting. Electrochim Acta 2019. [DOI: 10.1016/j.electacta.2018.11.208] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
|
17
|
Water-Facilitated Electrodeposition of Neodymium in a Phosphonium-Based Ionic Liquid. J Phys Chem Lett 2019; 10:289-294. [PMID: 30620201 DOI: 10.1021/acs.jpclett.8b03203] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Rare-earth metals are considered critical metals due to their extensive use in energy-related applications such as wind turbines and nickel-metal hybrid batteries found in hybrid electrical vehicles. A key drawback of the current processing methods includes the generation of large amounts of toxic and radioactive waste. Thus the efficient recovery of these valuable metals as well as cleaner processing methods are becoming increasingly important. Here we report on a clean electrochemical route for neodymium (Nd) recovery from [P6,6,6,14][TFSI], trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)amide which is amplified three times by the presence of water, as evidenced by the cathodic current density and thicker deposits. The role of Nd salt concentrations and water content as an additive in the electrochemistry of Nd3+ in [P6,6,6,14][TFSI] has been studied. The presence of metallic neodymium in the deposits has been confirmed by X-ray photoelectron spectroscopy.
Collapse
|
18
|
The Effect of Solvent on the Seebeck Coefficient and Thermocell Performance of Cobalt Bipyridyl and Iron Ferri/Ferrocyanide Redox Couples. Aust J Chem 2019. [DOI: 10.1071/ch19245] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
The conversion of thermal energy to electricity using thermoelectrochemical cells (thermocells) is a developing approach to harvesting waste heat. The performance of a thermocell is highly dependent on the solvent used in the electrolyte, but the interplay of the various solvent effects is not yet well understood. Here, using the redox couples [Co(bpy)3][BF4]2/3 (bpy=2,2′-bipyridyl) and (Et4N)3/(NH4)4Fe(CN)6, which have been designed to allow dissolution in different solvent systems (aqueous, non-aqueous, and mixed solvent), the effect of solvent on the Seebeck coefficient (Se) and cell performance was studied. The highest Se for a cobalt-based redox couple measured thus far is reported. Different trends in the Seebeck coefficients of the two redox couples as a function of the ratio of organic solvent to water were observed. The cobalt redox couple produced a more positive Se in organic solvent than in water, whereas addition of water to organic solvent resulted in a more negative Se for Fe(CN)6 3−/4−. UV-vis and IR investigations of the redox couples indicate that Se is affected by changes in solvent–ligand interactions in the different solvent systems.
Collapse
|
19
|
Quasi-solid-State Electrolytes for Low-Grade Thermal Energy Harvesting using a Cobalt Redox Couple. CHEMSUSCHEM 2018; 11:2788-2796. [PMID: 29873193 DOI: 10.1002/cssc.201800794] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/12/2018] [Revised: 06/05/2018] [Indexed: 06/08/2023]
Abstract
Thermoelectrochemical cells, also known as thermocells, are electrochemical devices for the conversion of thermal energy directly into electricity. They are a promising method for harvesting low-grade waste heat from a variety of different natural and manmade sources. The development of solid- or quasi-solid-state electrolytes for thermocells could address the possible leakage problems of liquid electrolytes and make this technology more applicable for wearable devices. Here, we report the gelation of an organic-solvent-based electrolyte system containing a redox couple for application in thermocell technologies. The effect of gelation of the liquid electrolyte, comprising a cobalt bipyridyl redox couple dissolved in 3-methoxypropionitrile (MPN), on the performance of thermocells was investigated. Polyvinylidene difluoride (PVDF) and poly(vinylidene fluoride-co-hexafluoropropene) (PVDF-HFP) were used for gelation of the electrolyte, and the influence of the different polymers on the mechanical properties was studied. The Seebeck coefficient and diffusivity of the cobalt redox couple were measured in both liquid and gelled electrolytes, and the effect of gelation on the thermocell performance is reported. Finally, the cell performance was further improved by optimizing the concentration of the redox couple and the separation between the hot and cold electrodes, and the stability of the device over 25 h of operation is demonstrated.
Collapse
|
20
|
Variations and applications of the oxygen reduction reaction in ionic liquids. Chem Commun (Camb) 2018; 54:3800-3810. [PMID: 29589628 DOI: 10.1039/c8cc00595h] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Increasing energy demands call for new energy storage technologies with high energy density to meet current and future needs. Metal-air batteries are especially attractive due to their superior specific energy, which is as much as 8 times that of today's best Li-ion batteries. However, the practical values achieved to date are far from the theoretical one and require further research to enhance the battery performance. The electrolyte plays an important role in the performance of the battery whose properties can be tuned by varying the chemical composition and through the use of additives. That is the case of ionic liquids which offer a wide variety of anion-cation combinations to realise maximum performance. This feature article overviews recent developments in ionic liquids as electrolytes for both magnesium-air and sodium-air batteries.
Collapse
|
21
|
Towards thermally stable high performance lithium-ion batteries: the combination of a phosphonium cation ionic liquid and a 3D porous molybdenum disulfide/graphene electrode. Chem Commun (Camb) 2018; 54:5338-5341. [DOI: 10.1039/c8cc01460d] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A lithium battery with excellent performance and thermal stability is realized by using a nanostructured electrode and an ionic liquid.
Collapse
|
22
|
Inorganic Nanoparticles/Metal Organic Framework Hybrid Membrane Reactors for Efficient Photocatalytic Conversion of CO 2. ACS APPLIED MATERIALS & INTERFACES 2017; 9:35010-35017. [PMID: 28937742 DOI: 10.1021/acsami.7b11150] [Citation(s) in RCA: 55] [Impact Index Per Article: 7.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Photocatalytic conversion of carbon dioxide (CO2) to useful products has potential to address the adverse environmental impact of global warming. However, most photocatalysts used to date exhibit limited catalytic performance, due to poor CO2 adsorption capacity, inability to efficiently generate photoexcited electrons, and/or poor transfer of the photogenerated electrons to CO2 molecules adsorbed on the catalyst surface. The integration of inorganic semiconductor nanoparticles across metal organic framework (MOF) materials has potential to yield new hybrid materials, combining the high CO2 adsorption capacity of MOF and the ability of the semiconductor nanoparticles to generate photoexcited electrons. Herein, controlled encapsulation of TiO2 and Cu-TiO2 nanoparticles within zeolitic imidazolate framework (ZIF-8) membranes was successfully accomplished, using rapid thermal deposition (RTD), and their photocatalytic efficiency toward CO2 conversion was investigated under UV irradiation. Methanol and carbon monoxide (CO) were found to be the only products of the CO2 reduction, with yields strongly dependent upon the content and composition of the dopant semiconductor particles. CuTiO2 nanoparticle doped membranes exhibited the best photocatalytic performance, with 7 μg of the semiconductor nanoparticle enhancing CO yield of the pristine ZIF-8 membrane by 233%, and methanol yield by 70%. This work opens new routes for the fabrication of hybrid membranes containing inorganic nanoparticles and MOFs, with potential application not only in catalysis but also in electrochemical, separation, and sensing applications.
Collapse
|
23
|
Electrochemical Behavior of PEDOT/Lignin in Ionic Liquid Electrolytes: Suitable Cathode/Electrolyte System for Sodium Batteries. CHEMSUSCHEM 2017; 10:1783-1791. [PMID: 28198593 DOI: 10.1002/cssc.201700012] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/03/2017] [Revised: 02/14/2017] [Indexed: 05/13/2023]
Abstract
Biomass-derived polymers, such as lignin, contain quinone/ hydroquinone redox moieties that can be used to store charge. Composites based on the biopolymer lignin and several conjugated polymers have shown good charge-storage properties. However, their performance has been only studied in acidic aqueous media limiting their applications mainly to supercapacitors. Here, we show that PEDOT/lignin (PEDOT: poly(3,4-ethylenedioxythiophene)) biopolymers are electroactive in aprotic ionic liquids (ILs) and we move a step further by assembling sodium full cell batteries using PEDOT/lignin as electrode material and IL electrolytes. Thus, the electrochemical activity and cycling of PEDOT/lignin electrodes was investigated in 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (BMPyrTFSI), 1-butyl-1-methylpyrrolidinium bis(fluorosulfonyl)imide (BMPyrFSI), 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMImTFSI) and 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide (EMImFSI) IL electrolytes. The effects of water and sodium salt addition to the ILs were investigated to obtain optimum electrolyte systems for sodium batteries. Finally, sodium batteries based on PEDOT/lignin cathode with imidazolium-based IL electrolyte showed higher capacity values than pyrrolidinium ones, reaching 70 mAhg-1 . Our results demonstrate that PEDOT/lignin composites can serve as low cost and sustainable cathode materials for sodium batteries.
Collapse
|
24
|
Highly reversible oxygen to superoxide redox reaction in a sodium-containing ionic liquid. Electrochem commun 2017. [DOI: 10.1016/j.elecom.2016.11.010] [Citation(s) in RCA: 19] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022] Open
|
25
|
Stable Deep Doping of Vapor-Phase Polymerized Poly(3,4-ethylenedioxythiophene)/Ionic Liquid Supercapacitors. CHEMSUSCHEM 2016; 9:2112-2121. [PMID: 27325487 DOI: 10.1002/cssc.201600333] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/10/2016] [Revised: 05/10/2016] [Indexed: 06/06/2023]
Abstract
Liquid-solution polymerization and vapor-phase polymerization (VPP) have been used to manufacture a series of chloride- and tosylate-doped poly(3,4-ethylenedioxythiophene) (PEDOT) carbon paper electrodes. The electrochemistry, specific capacitance, and specific charge were determined for single electrodes in 1-ethyl-3-methylimidazolium dicyanamide (emim dca) ionic liquid electrolyte. VPP-PEDOT exhibits outstanding properties with a specific capacitance higher than 300 F g(-1) , the highest value reported for a PEDOT-based conducting polymer, and doping levels as high as 0.7 charges per monomer were achieved. Furthermore, symmetric PEDOT supercapacitor cells with the emim dca electrolyte exhibited a high specific capacitance (76.4 F g(-1) ) and high specific energy (19.8 Wh kg(-1) ). A Ragone plot shows that the VPP-PEDOT cells combine the high specific power of conventional ("pure") capacitors with the high specific energy of batteries, a highly sought-after target for energy storage.
Collapse
|
26
|
Rechargeable Zn/PEDOT Battery with an Imidazolium-Based Ionic Liquid as the Electrolyte. ChemElectroChem 2015. [DOI: 10.1002/celc.201500278] [Citation(s) in RCA: 33] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
|
27
|
Ionic conductivity and molecular dynamic behavior in supramolecular ionic networks; the effect of lithium salt addition. Electrochim Acta 2015. [DOI: 10.1016/j.electacta.2015.02.064] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
|
28
|
The Reduction of Oxygen on Iron(II) Oxide/Poly(3,4-ethylenedioxythiophene) Composite Thin Film Electrodes. Electrochim Acta 2015. [DOI: 10.1016/j.electacta.2014.12.048] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
29
|
Aggregation of a Dibenzo[b,def]chrysene Based Organic Photovoltaic Material in Solution. J Phys Chem B 2014; 118:6839-49. [DOI: 10.1021/jp501220v] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
30
|
Enhanced performance of phosphonium based ionic liquids towards 4 electrons oxygen reduction reaction upon addition of a weak proton source. Electrochem commun 2014. [DOI: 10.1016/j.elecom.2013.10.004] [Citation(s) in RCA: 35] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022] Open
|
31
|
Insights into the reversible oxygen reduction reaction in a series of phosphonium-based ionic liquids. Phys Chem Chem Phys 2014; 16:25062-70. [DOI: 10.1039/c4cp04101a] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Extensive evidence for the stability of the superoxide anion in phosphonium-based ILs is demonstrated by computational quantum chemistry and NMR.
Collapse
|
32
|
|
33
|
Redox Chemistry of the Superoxide Ion in a Phosphonium-Based Ionic Liquid in the Presence of Water. J Phys Chem Lett 2013; 4:1834-1837. [PMID: 26283117 DOI: 10.1021/jz400715r] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
Stable electrogenerated superoxide ion has been observed for the first time in a phosphonium-based ionic liquid in the presence of water, leading to a chemically reversible O2/O2(•-) redox couple instead of the disproportionation reaction that is usually observed. It appears that the cation solvates the superoxide anion, stabilizing it against the disproportionation reaction. The electrogeneration is studied at various levels of water or other diluents including toluene to explore the limits of stability of the superoxide ion under these conditions.
Collapse
|
34
|
Assessment of permethylated transition-metal sandwich complexes as internal reference redox systems in ionic liquids. Phys Chem Chem Phys 2013; 15:2547-53. [DOI: 10.1039/c2cp43177g] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
35
|
Synthesis and electro-optical characterization of new conducting PEDOT/Au-nanorods nanocomposites. POLYM ADVAN TECHNOL 2010. [DOI: 10.1002/pat.1655] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
36
|
Innovative materials and applications based on poly(3,4-ethylenedioxythiophene) and ionic liquids. ACTA ACUST UNITED AC 2010. [DOI: 10.1039/c0jm00114g] [Citation(s) in RCA: 38] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
37
|
Synthesis of 2-(Selenophen-2-yl)pyrroles and Their Electropolymerization to Electrochromic Nanofilms. Chemistry 2009; 15:6435-45. [DOI: 10.1002/chem.200900348] [Citation(s) in RCA: 37] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
|
38
|
Electrochemical synthesis of PEDOT derivatives bearing imidazolium-ionic liquid moieties. ACTA ACUST UNITED AC 2009. [DOI: 10.1002/pola.23384] [Citation(s) in RCA: 41] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
|
39
|
Synthesis and Spectroelectrochemical Characterization of an Electrochromic Phosphole-EDOT Copolymer: poly([1-phenyl-2,5-bis(2-thienyl)thioxophosphole]0.14 -co- [3,4-ethylendioxythiophene]0.86). Polym Bull (Berl) 2008. [DOI: 10.1007/s00289-008-0998-3] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
40
|
Influence of the Introduction of Short Alkyl Chains in Poly(2-(2-Thienyl)-1H-pyrrole) on Its Electrochromic Behavior. Macromolecules 2008. [DOI: 10.1021/ma801190n] [Citation(s) in RCA: 37] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
41
|
PEDOT:Poly(1-vinyl-3-ethylimidazolium) dispersions as alternative materials for optoelectronic devices. ACTA ACUST UNITED AC 2008. [DOI: 10.1002/pola.22646] [Citation(s) in RCA: 28] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
|
42
|
|
43
|
Combined electrochromic and plasmonic optical responses in conducting polymer/metal nanoparticle films. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 2007; 7:2938-41. [PMID: 17685323 DOI: 10.1166/jnn.2007.623] [Citation(s) in RCA: 26] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/16/2023]
Abstract
Poly(3,4-ethylenedioxithiophene)/poly(styrene sulphonate) (PEDOT/PSS) aqueous dispersions were mixed with aqueous gold nanoparticle and aqueous silver nanoparticle colloids. PEDOT/gold nanoparticles (Au NP) and PEDOT/silver nanoparticles (Ag NP) films were obtained by solvent casting the corresponding aqueous solutions. The nanocomposite films showed the optical characteristics associated with both the surface plasmon absorption resonance of the metal nanoparticles and the excitation of the bipolaron band of the conducting polymer. As an interesting application we demonstrate the use of metal nanoparticles to tune the color of PEDOT based electrochromic films from blue to violet in the case of Au NP or green in the case of Ag NP.
Collapse
|
44
|
Incorporation of fused tetrathiafulvalenes (TTFs) into polythiophene architectures: varying the electroactive dominance of the TTF species in hybrid systems. J Phys Chem B 2007; 110:3140-52. [PMID: 16494321 DOI: 10.1021/jp057256h] [Citation(s) in RCA: 53] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
A novel polythienylenevinylene (PTV) and two new polythiophenes (PTs), featuring fused tetrathiafulvalene (TTF) units, have been prepared and characterized by ultraviolet-visible (UV-vis) and electron paramagnetic resonance (EPR) spectroelectrochemistry. All polymers undergo two sequential, reversible oxidation processes in solution. Structures in which the TTF species is directly linked to the polymer backbone (2 and 4) display redox behavior which is dictated by the fulvalene system. Once the TTF is spatially removed from the polymer chain by a nonconjugated link (polymer 3), the electroactivity of both TTF and polythiophene moieties can be detected. Computational studies confirm the delocalization of charge over both electroactive centers (TTF and PT) and the existence of a triplet dication intermediate. PTV 4 has a low band gap (1.44 eV), is soluble in common organic solvents, and is stable under ambient conditions. Organic solar cells of polymer 4:[6,6]-phenyl-C(61) butyric acid methyl ester (PCBM) have been fabricated. Under illumination, a photovoltaic effect is observed with a power conversion efficiency of 0.13% under AM1.5 solar simulated light. The onset of photocurrent at 850 nm is consistent with the onset of the pi-pi absorption band of the polymer. Remarkably, UV-vis spectroelectrochemistry of polymer 4 reveals that the conjugated polymer chain remains unchanged during the oxidation of the polymer.
Collapse
|
45
|
Tailor-made polymer electrolytes based upon ionic liquids and their application in all-plastic electrochromic devices. Electrochem commun 2006. [DOI: 10.1016/j.elecom.2006.01.013] [Citation(s) in RCA: 174] [Impact Index Per Article: 9.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022] Open
|
46
|
Synthesis and electrochemical characterization of dipyrroles separated by diphenyleneoxide and diphenylenesulfide spacers via the Trofimov reaction. Tetrahedron 2005. [DOI: 10.1016/j.tet.2005.05.088] [Citation(s) in RCA: 14] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
47
|
New Organic Dispersions of Conducting Polymers Using Polymeric Ionic Liquids as Stabilizers. Macromol Rapid Commun 2005. [DOI: 10.1002/marc.200500250] [Citation(s) in RCA: 56] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
48
|
A new family of conjugated metallopolymers from electropolymerised bis[(terthiophene)dithiolene] complexes. Chem Commun (Camb) 2002:2408-9. [PMID: 12430464 DOI: 10.1039/b206243g] [Citation(s) in RCA: 27] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Bis(dithiolene) metal complexes incorporating fused terthiophene units have been prepared; the nickel analogue undergoes electropolymerisation to afford a low bandgap material with very broad absorption characteristics.
Collapse
|
49
|
Synthesis of novel poly(dithienylpyridines)Electronic supplementary information (ESI) available: further experimental details. See http://www.rsc.org/suppdata/jm/b2/b201229d/. ACTA ACUST UNITED AC 2002. [DOI: 10.1039/b201229d] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
50
|
Synthesis and electropolymerisation of 3′,4′-bis(alkylsulfanyl)terthiophenes and the significance of the fused dithiin ring in 2,5-dithienyl-3,4-ethylenedithiothiophene (DT-EDTT). ACTA ACUST UNITED AC 2002. [DOI: 10.1039/b109017h] [Citation(s) in RCA: 36] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|