Bidirectional Phase Transformation of Supramolecular Networks Using Two Molecular Signals

Reversible control of molecular self-assembly is omnipresent in adaptive biological systems, yet its realization in artificial systems remains a major challenge. Using scanning tunneling microscopy and density functional theory calculations, we show that a 2D supramolecular network formed by terthienobenzenetricarboxylic acid (TTBTA) can undergo a reversible structural transition between a porous and dense phase in response to different molecular signals (trimethyltripyrazolotriazine (TMTPT) and C₆₀). TMTPT molecules can induce a phase transition from the TTBTA honeycomb to the dense phase, whereas a reverse transition can be triggered by introducing C₆₀ molecules. This response stems from the selective association between signal molecules and TTBTA polymorphs. The successful realization of reversible molecular transformation represents important progress in controlling supramolecular surface nanostructures and could be potentially applicable in various areas of nanotechnology, including phase control, molecular sensing, and "smart" switchable surfaces.

Adatoms in the Surface-Confined Ullmann Coupling of Phenyl Groups

Despite the importance of the on-surface Ullmann coupling for synthesis of atomically precise carbon nanostructures, it is still unclear whether this reaction is catalyzed by surface atoms or adatoms. Here, the feasibility of the adatom creation and adatom-catalyzed Ullmann coupling of chloro-, bromo-, and iodobenzene on Cu(111), Ag(111), and Au(111) surfaces is examined using density functional theory modeling. The extraction of a metal atom is found to be greatly facilitated by the formation of strong phenyl-metal bonds, making the extraction energy barrier comparable to, and in the case of Ag(111) even lower than, that for the competing surface-catalyzed phenyl-phenyl bond formation. However, if the phenyl-adatom bonds are too strong, as on Cu(111) and Ag(111), they create an insurmountable barrier for the subsequent adatom-catalyzed C-C coupling. In contrast, Au adatoms do not bind phenyl groups strongly and can catalyze the C-C bond formation almost as efficiently as surface atoms.

Mechanism of the Photodegradation of A-D-A Acceptors for Organic Photovoltaics*

Herein, we elucidate the photodegradation pathway of A-D-A-type non-fullerene acceptors for organic photovoltaics. Using IT-4F as a benchmark example, we isolated the photoproducts and proved them isomers of IT-4F formed by a 6-e electrocyclic reaction between the dicyanomethylene unit and the thiophene ring, followed by a 1,5-sigmatropic hydride shift. This photoisomerization was accelerated under inert conditions, as explained by DFT calculations predicting a triplet-mediated reaction path (quenchable by oxygen). Adding controlled amounts of the photoproduct P1 to PM6:IT-4F bulk heterojunction cells led to a progressive decrease in photocurrent and fill factor attributed to its poor absorption and charge transport properties. The reaction is a general photodegradation pathway for a series of A-D-A molecules with 1,1-dicyanomethylene-3-indanone termini, and its rate varies with the structure of the donor and acceptor moiety.

Identification of Topotactic Surface-Confined Ullmann-Polymerization

On-surface Ullmann coupling is an established method for the synthesis of 1D and 2D organic structures. A key limitation to obtaining ordered polymers is the uncertainty in the final structure for coupling via random diffusion of reactants over the substrate, which leads to polymorphism and defects. Here, a topotactic polymerization on Cu(110) in a series of differently-halogenated para-phenylenes is identified, where the self-assembled organometallic (OM) reactants of diiodobenzene couple directly into a single, deterministic product, whereas the other precursors follow a diffusion driven reaction. The topotactic mechanism is the result of the structure of the iodine on Cu(110), which controls the orientation of the OM reactants and intermediates to be the same as the final polymer chains. Temperature-programmed X-ray photoelectron spectroscopy and kinetic modeling reflect the differences in the polymerization regimes, and the effects of the OM chain alignments and halogens are disentangled by Nudged Elastic Band calculations. It is found that the repulsion or attraction between chains and halogens drive the polymerization to be either diffusive or topotactic. These results provide detailed insights into on-surface reaction mechanisms and prove the possibility of harnessing topotactic reactions in surface-confined Ullmann polymerization.

Synthesis of Boroxine and Dioxaborole Covalent Organic Frameworks via Transesterification and Metathesis of Pinacol Boronates

Boroxine and dioxaborole are the first and some of the most studied synthons of covalent organic frameworks (COFs). Despite their wide application in the design of functional COFs over the last 15 years, their synthesis still relies on the original Yaghi's condensation of boronic acids (with itself or with polyfunctional catechols), some of which are difficult to prepare, poorly soluble, or unstable in the presence of water. Here, we propose a new synthetic approach to boroxine COFs (on the basis of the transesterification of pinacol aryl boronates (aryl-Bpins) with methyl boronic acid (MBA) and dioxaborole COFs (through the metathesis of pinacol boronates with MBA-protected catechols). The aryl-Bpin and MBA-protected catechols are easy to purify, highly soluble, and bench-stable. Furthermore, the kinetic analysis of the two model reactions reveals high reversibility (K_eq ∼ 1) and facile control over the equilibrium. Unlike the conventional condensation, which forms water as a byproduct, the byproduct of the metathesis (MBA pinacolate) allows for easy kinetic measurements of the COF formation by conventional ¹H NMR. We show the generality of this approach by the synthesis of seven known boroxine/dioxaborole COFs whose crystallinity is better or equal to those reported by conventional condensation. We also apply metathesis polymerization to obtain two new COFs, Py4THB and B2HHTP, whose synthesis was previously precluded by the insolubility and hydrolytic instability, respectively, of the boronic acid precursors.

Room Temperature Phosphorescence vs Triplet-Triplet Annihilation in N-Substituted Acridone Solids

Organic room temperature phosphorescent (ORTP) compounds have recently emerged as a promising class of emissive materials with a multitude of potential applications. However, the number of building blocks that give rise to efficient ORTP materials is still limited, and the rules for engineering phosphorescent properties in organic solids are not well understood. Here, we report ORTP in a series of N-substituted acridone derivatives with electron-donating, electron-withdrawing, and sterically bulky substituents. X-ray crystallography shows that the solid-state packing varies progressively between coparallel and antiparallel π-stacking and separated π-dimers, depending on the size of the substituent. The detailed photophysical studies supported by DFT calculations reveal complex dynamics of singlet and triplet excited states, depending on the electronic effects of substituents and solid-state packing. The programmable molecular packing provides a lever to control the triplet-triplet annihilation that is manifested as delayed fluorescence in acridone derivatives with continuous (both parallel and antiparallel) π-stacking.

Quantifying Planarity in the Design of Organic Electronic Materials

Planarity is essential for many organic electronic materials as it maximizes the intramolecular π-orbital overlap and enables efficient intermolecular interactions through π-stacking. We propose a statistical way of quantifying the planarity of a wide range of conjugated systems. The quantification takes into account all torsional conformations and their relative contribution to the overall structural disorder, through a planarity index ⟨cos² ϕ⟩. The propensity for planarization and the effect of rotational disorder were examined for a series of commonly used building blocks. The application of the analysis to extended conjugated systems and the correlations between the gas-phase ⟨cos² ϕ⟩ and crystallographically observed planarity in the solid state were explored. Our calculations also reveal a previously unrecognized effect of increasing band gap upon planarization for conjugated systems coupling strong electron donor and acceptor units.

Halogen bonding vs. π-stacking interactions in new bis(acenaphthylene)dione semiconductors

A series of new halogenated bis(acenaphthylene)dione (BAN) derivatives was synthesized, and the effect of halogen bonding on both molecular and crystal structure, and charge transport in n-type thin film transistors was investigated.

A Pure-Red Doublet Emission with 90 % Quantum Yield: Stable, Colorless, Iodinated Triphenylmethane Solid

Red luminescence is found in off-white tris(iodoperchlorophenyl)methane (3I-PTM^H ) crystals which is characterized by a high photoluminescence quantum yield (PLQY 91 %) and color purity (CIE coordinates 0.66, 0.34). The emission originates from the doublet excited state of the neutral radical 3I-PTM^R , which is spontaneously formed and becomes embedded in the 3I-PTM^H matrix. The radical defect can also be deliberately introduced into 3I-PTM^H crystals which maintain a high PLQY with up to 4 % radical concentration. The immobilized iodinated radical demonstrates excellent photostability (estimated half-life >1 year under continuous irradiation) and intriguing luminescent lifetime (69 ns). TD-DFT calculations demonstrate that electron-donating iodine atoms accelerate the radiative transition while the rigid halogen-bonded matrix suppresses the nonradiative decay.

Synthesis of mesoscale ordered two-dimensional π-conjugated polymers with semiconducting properties

Two-dimensional materials with high charge carrier mobility and tunable band gaps have attracted intense research effort for their potential use in nanoelectronics. Two-dimensional π-conjugated polymers constitute a promising subclass because the band structure can be manipulated by varying the molecular building blocks while preserving key features such as Dirac cones and high charge mobility. The major barriers to the application of two-dimensional π-conjugated polymers have been the small domain size and high defect density attained in the syntheses explored so far. Here, we demonstrate the fabrication of mesoscale ordered two-dimensional π-conjugated polymer kagome lattices with semiconducting properties, Dirac cone structures and flat bands on Au(111). This material has been obtained by combining a rigid azatriangulene precursor and a hot dosing approach, which favours molecular diffusion and eliminates voids in the network. These results open opportunities for the synthesis of two-dimensional π-conjugated polymer Dirac cone materials and their integration into devices.

Nitroaromatics as n-type organic semiconductors for field effect transistors

The nitro group (NO2) is one of the most common electron-withdrawing groups but it has rarely been used in the design of organic semiconductors (OSCs). Herein, we report the n-type semiconducting behavior of simple fluorenone derivatives functionalized with NO2 and CN groups. While the electron mobilities measured in the thin film field-effect transistors are modest (10-6-10-4 cm2 V-1 s-1), the nitrofluorenone OSCs offer excellent air-stability and remarkable tunability of energy levels via facile modification of the substitution pattern. We study the effect of substituents on the electrochemical properties, molecular and crystal structure, and the charge transport properties of nitrofluorenones to revitalize the underestimated potential of NO2 functionalization in organic electronics.

Stereospecific Epitaxial Growth of Bilayered Porous Molecular Networks

Stereocontrolled multilayer growth of supramolecular porous networks at the interface between graphite and a solution was investigated. For this study, we designed a chiral dehydrobenzo[12]annulene (DBA) building block bearing alkoxy chains substituted at the 2 position with hydroxy groups, which enable van der Waals stabilization in a layer and potential hydrogen-bonding interactions between the layers. Bias voltage-dependent scanning tunneling microscopy (STM) experiments revealed the diastereospecificity of the bilayer with respect to both the intrinsic chirality of the building blocks and the supramolecular chirality of the self-assembled networks. Top and bottom layers within the same crystalline domain were composed of the same enantiomers but displayed opposite supramolecular chiralities.

Transformation between 2D and 3D Covalent Organic Frameworks via Reversible [2 + 2] Cycloaddition

We report the first transformation between crystalline vinylene-linked two-dimensional (2D) polymers and crystalline cyclobutane-linked three-dimensional (3D) polymers. Specifically, absorption-edge irradiation of the 2D poly(arylenevinylene) covalent organic frameworks (COFs) results in topological [2 + 2] cycloaddition cross-linking of the π-stacked layers in 3D COFs. The reaction is reversible, and heating to 200 °C leads to a cycloreversion while retaining the COF crystallinity. The resulting difference in connectivity is manifested in the change of mechanical and electronic properties, including exfoliation, blue-shifted UV-vis absorption, altered luminescence, modified band structure, and different acid-doping behavior. The Li-impregnated 2D and 3D COFs show a significant room-temperature ion conductivity of 1.8 × 10^-4 S/cm and 3.5 × 10^-5 S/cm, respectively. Even higher room-temperature proton conductivity of 1.7 × 10^-2 S/cm and 2.2 × 10^-3 S/cm was found for H₂SO₄-treated 2D and 3D COFs, respectively.

Boosting Efficiency and Curtailing the Efficiency Roll-Off in Green Perovskite Light-Emitting Diodes via Incorporating Ytterbium as Cathode Interface Layer

Perovskite light-emitting diodes (PeLEDs) exhibit high external quantum efficiencies (EQEs), emerging as a next-generation lighting and display technology. Nevertheless, they suffer from severe efficiency roll-off at high luminance, particularly in the case of blue and green emissions, which is one of the major bottlenecks in their industrial applications. Here, we attack this problem using a rare-earth metal, Yb, as cathode interface layer (CIL) for green PeLEDs. By adopting a new device configuration of ITO/TFB/FA-based quasi-2D perovskite/TPBi/Yb/Ag, we achieved a peak current efficiency (CE) of 22.3 cd/A with a corresponding EQE of 5.28% and a high maximum luminance of 19 160 cd/m². Importantly, the maximum CE of 22.0 cd/A at 2000 cd/m² slightly decreased to 16.8 cd/A at 5000 cd/m² and maintained a still-decent value of 12.0 cd/A at a high luminance of 10 000 cd/m², exhibiting a remarkably low efficiency roll-off. Our Yb-incorporated devices significantly outperformed the PeLEDs containing conventional CILs, including Mg and Liq, in terms of peak efficiency, efficiency roll-off, and operational lifetime. We attribute this encouraging performance to barrier-free, efficient electron injection enabled by the low work function of Yb (2.6 eV), which led to a high electron current, nearly approaching the hole current in hole-dominant PeLEDs, as confirmed by the single-carrier device measurements. In addition, we also present Yb-incorporated PeLEDs containing Cs-based quasi-2D perovskite as the emissive layer, which displayed an impressive CE of 51.3 cd/A with a corresponding EQE of 16.4% and a maximum luminance of 14 240 cd/m², and still demonstrated a reduced efficiency roll-off comparing to that of the Liq-based equivalent. These results unveil the inspiring prospects of Yb as an efficient CIL for PeLEDs toward high efficiency with curtailed roll-off.

Surface-Confined Macrocyclization via Dynamic Covalent Chemistry

Surface-confined synthesis is a promising approach to build complex molecular nanostructures including macrocycles. However, despite the recent advances in on-surface macrocyclization under ultrahigh vacuum, selective synthesis of monodisperse and multicomponent macrocycles remains a challenge. Here, we report on an on-surface formation of [6 + 6] Schiff-base macrocycles via dynamic covalent chemistry. The macrocycles form two-dimensional crystalline domains on the micrometer scale, enabled by dynamic conversion of open-chain oligomers into well-defined ∼3.0 nm hexagonal macrocycles. We further show that by tailoring the length of the alkyl substituents, it is possible to control which of three possible products-oligomers, macrocycles, or polymers-will form at the surface. In situ scanning tunneling microscopy imaging combined with density functional theory calculations and molecular dynamics simulations unravel the synergistic effect of surface confinement and solvent in leading to preferential on-surface macrocyclization.

Trifluoromethyl Group-Modified Non-Fullerene Acceptor toward Improved Power Conversion Efficiency over 13% in Polymer Solar Cells

Herein, we report a new molecule structure modification strategy for non-fullerene small-molecule electron acceptors (NFAs) for solar cells through trifluoromethylation of end-capping groups. The synthesized trifluoromethylated acceptor ITCF3 exhibits narrower band gap, stronger light absorption, lower molecular energy levels, and better electron transport property compared to the reference NFA without the trifluoromethyl group (ITIC). Bulk heterojunction solar cells based on ITCF3 combined with the PM6 polymer donor exhibit a significantly improved power conversion efficiency of 13.3% compared with the ITIC-based device (8.4%). This work reveals great potential of trifluoromethylation in the design of efficient photovoltaic acceptor materials.

Surface-confined single-layer covalent organic frameworks: design, synthesis and application

This review describes the state of the art of surface-confined single-layer covalent organic frameworks, focusing on reticular design, synthesis approaches, and exploring applications in host/guest chemistry.

Covalent organic frameworks from a monomer with reduced symmetry: polymorphism and Sierpiński triangles

We report on the synthesis of a covalent organic framework based on the low-symmetry 1,3-benzenediboronic acid precursor. Two distinct polymorphs are obtained, a honeycomb network and Sierpiński triangles, as elucidated by scanning tunneling microscopy. Control over polymorph formation was achieved by varying the precursor concentration for on-surface synthesis.

Temperature-induced molecular reorganization on Au(111) driven by oligomeric defects

The formation of ordered molecular structures on surfaces is determined by the balance between molecule-molecule and molecule-substrate interactions. Whether the aggregation process is guided by non-covalent forces or on-surface reactions, a deeper understanding of these interactions is pivotal to formulating a priori predictions of the final structural features and the development of bottom-up fabrication protocols. Theoretical models of molecular systems corroborate the information gathered through experimental observations and help explain the thermodynamic factors that underpin on-surface phase transitions. Here, we report a scanning tunneling microscopy investigation of a tribromo-substituted heterotriangulene on the Au(111) surface, which initially forms an extended close-packed ordered structure stabilized by BrBr halogen bonds when deposited at room temperature. X-ray photoelectron spectroscopy reveals that annealing the self-assembled layer induces a fraction of the molecular precursors to partially dehalogenate that in turn leads to the formation of a less stable BrO non-covalent network which coexists with the short oligomers. Density functional theory (DFT) and Monte Carlo (MC) simulations illustrate how dimer moieties act as defects whose steric hindrance prevents the retention of the more stable configuration. A small number of dimers is sufficient to drive the molecular reorganization into a lower cohesive energy phase. Our study shows the importance of a combined DFT - MC approach to understand the evolution of molecular systems on substrates.

Strong Enhancement of π-Electron Donor/Acceptor Ability by Complementary DD/AA Hydrogen Bonding

π-Conjugated organic materials possess a wide range of tunable optoelectronic properties which are dictated by their molecular structure and supramolecular arrangement. While many efforts have been put into tuning the molecular structure to achieve the desired properties, rational supramolecular control remains a challenge. Here, we report a novel series of supramolecular materials formed by the co-assembly of weak π-electron donor (indolo[2,3-a]carbazole) and acceptor (aromatic o-quinones) molecules via complementary hydrogen bonding. The resulting polarization creates a drastic perturbation of the molecular energy levels, causing strong charge transfer in the weak donor-acceptor pairs. This leads to a significant lowering (up to 1.5 eV) of the band gaps, intense absorption in the near-IR region, very short π-stacking distances (≥3.15 Å), and strong ESR signals in the co-crystals. By varying the strength of the acceptor, the characteristics of the complexes can be tuned between intrinsic, gate-, or light-induced semiconductivity with a p-type or ambipolar transport mechanism.

A macrocyclic oligofuran: synthesis, solid state structure and electronic properties

The first π-conjugated macrocyclic system with an oligofuran backbone display planar conformation and forms large π-aggregates, in contrast to the twisted conformation of small macrocyclic oligothiophenes.

We report the first π-conjugated macrocyclic system with an oligofuran backbone. The calculated HOMO–LUMO gap is similar to that of the corresponding linear polymer, indicating a remarkable electron delocalization. The X-ray structure reveals a planar conformation, in contrast to the twisted conformation of macrocyclic oligothiophenes. The intermolecular π–π stacking distance is extremely small (3.17 Å), indicating very strong interactions. The macrocycle forms large π-aggregates in solution and shows a tendency toward highly ordered multilayer adsorption at the solid–liquid interface. The face-on orientation of molecules explains the higher hole mobility observed in the out-of-plane direction.

Pure and mixed ordered monolayers of tetracyano-2,6-naphthoquinodimethane and hexathiapentacene on the Ag(100) surface

We report on mixed ordered monolayers of the electron acceptor-type molecule tetracyano-2,6-naphthoquinodimethane (TNAP) and the electron donor-type molecule hexathiapentacene (HTPEN). This investigation was motivated by the general question which type of mixed stoichiometric structures are formed on a surface by molecules that are otherwise typically used for the synthesis of bulk charge-transfer materials. The layers were obtained by vacuum deposition on the Ag(100) surface and analyzed by low-energy electron diffraction (LEED) and scanning tunneling microscopy (STM). The formation of the mixed structure occurs spontaneously. An important motif for the structure formation is given by hydrogen bonds between the TNAP molecules. Both molecules, TNAP and HTPEN also form well-ordered monolayers on the Ag(100) surface on their own. In all structures, the molecules are adsorbed in a planar orientation on the surface. We discuss the influence of intermolecular charge transfer on the ordering in the mixed structure.

Surface-mediated assembly, polymerization and degradation of thiophene-based monomers

Ullmann coupling of halogenated aromatics is widely used in on-surface synthesis of two-dimensional (2D) polymers and graphene nanoribbons. It stands out among other reactions for regioselectively connecting aromatic monomers into 1D and 2D π-conjugated polymers, whose final structure and properties are determined by the initial building blocks. Thanks to their exceptional electronic properties, thiophene-containing monomers are frequently used for the synthesis of various conjugated materials. On the other hand, their use in on-surface polymerization is hampered by the possibility of ring opening when adsorbed on metal surfaces. In the present work, we mapped the temperature regime for these two competing reactions by investigating the adsorption of a thiophene-based prochiral molecule using scanning tunneling microscopy, X-ray photoelectron spectroscopy and density functional theory calculations. We followed the formation of organometallic (OM) networks, their evolution into covalent structures and the competition between C-C coupling and thiophene ring opening. The effect of surface reactivity was explored by comparing the adsorption on three (111) coinage metal substrates, namely Au, Ag and Cu. While outlining strategies to minimize the ring opening reaction, we found that the surface temperature during deposition is of paramount importance for the preparation of 2D OM networks, greatly enhancing the overall ordering of the product by depositing on hot Ag surface. Notably, the same protocol permits the creation of OM structures on the air-stable Au surface, thereby allowing the synthesis and application of 2D OM networks outside the ultra-high vacuum environment.

An unexpected organometallic intermediate in surface-confined Ullmann coupling

Ullmann coupling or, more generally, dehalogenative aryl-aryl coupling, is one of the most widely exploited chemical reactions to obtain one- and two-dimensional polymers on metal surfaces. It is generally described as a two-step reaction: (i) dehalogenation, resulting in the formation of a stable intermediate organometallic phase and subsequent (ii) C-C coupling. The topology of the resulting polymer depends on the number and positions of the halogen atoms in the haloaromatic precursor, although its orientation and order are determined by the structure of the intermediate phase. Hitherto, only one intermediate structure, identified as an organometallic (OM) phase, has been reported for such a reaction. Here we demonstrate the formation of two distinct OM phases during the temperature-induced growth of poly(para-phenylene) from 1,4-dibromobenzene precursors on Cu(110). Beyond the already known linear-OM chains, we show that a phase reorganization to a chessboard-like 2D-OM can be activated in a well-defined temperature range. This new intermediate phase, revealed only when the reaction is carried out at low molecular coverages, was characterized by X-ray photoelectron spectroscopy, scanning tunneling microscopy and near-edge X-ray absorption fine structure spectroscopy, and modeled by density functional theory calculations. Our data show that the 2D-OM remains stable after cooling down the sample and is stabilized by four-Cu clusters at each node. The observation of such unexpected intermediate phase shows the complexity of the mechanisms underlying on-surface synthesis and broadens the understanding of Ullmann coupling, which continues to be astonishing despite its extensive use.

The role of halogens in on-surface Ullmann polymerization

Ullmann coupling is the most common approach to form surface-confined one- and two-dimensional conjugated structures from haloaryl derivatives. The dimensions of the formed nanostructures can be controlled by the number and location of halogens within the molecular precursors. Our study illustrates that the type of halogen plays an essential role in the design, orientation, and extent of the surface-confined organometallic and polymeric nanostructures. We performed a comparative analysis of five 1,4-dihalobenzene molecules containing chlorine, bromine, and iodine on Cu(110) using scanning tunneling microscopy, fast-X-ray photoelectron and near edge X-ray absorption fine structure spectroscopies. Our experimental data identify different molecular structures, reaction temperatures and kinetics depending on the halogen type. Climbing image nudged elastic band simulations further clarify these observations by providing distinct diffusion paths for each halogen species. We show that in addition to the structure of the building blocks, the halogen type has a direct influence on the morphology of surface-confined polymeric structures based on Ullmann coupling.

Supramolecular Assemblies on Surfaces: Nanopatterning, Functionality, and Reactivity

Understanding how molecules interact to form large-scale hierarchical structures on surfaces holds promise for building designer nanoscale constructs with defined chemical and physical properties. Here, we describe early advances in this field and highlight upcoming opportunities and challenges. Both direct intermolecular interactions and those that are mediated by coordinated metal centers or substrates are discussed. These interactions can be additive, but they can also interfere with each other, leading to new assemblies in which electrical potentials vary at distances much larger than those of typical chemical interactions. Earlier spectroscopic and surface measurements have provided partial information on such interfacial effects. In the interim, scanning probe microscopies have assumed defining roles in the field of molecular organization on surfaces, delivering deeper understanding of interactions, structures, and local potentials. Self-assembly is a key strategy to form extended structures on surfaces, advancing nanolithography into the chemical dimension and providing simultaneous control at multiple scales. In parallel, the emergence of graphene and the resulting impetus to explore 2D materials have broadened the field, as surface-confined reactions of molecular building blocks provide access to such materials as 2D polymers and graphene nanoribbons. In this Review, we describe recent advances and point out promising directions that will lead to even greater and more robust capabilities to exploit designer surfaces.

Alkyl chain length effects on double-deck assembly at a liquid/solid interface

Controlled double-deck packing is an appealing means to expand upon conventional 2D self-assembly which is critical in crystal engineering, yet it is rare and poorly understood. Herein, we report the first systematic study of double-deck assembly in a series of alkylated aminoquinone derivatives at the liquid-solid interface. The competition between the fraction of alkyl chains adsorbed on the surface and the optimal conformation of the alkyl chains near the head group leads to a stepwise structural transformation ranging from complete double-deck packing to complete monolayer packing. Alkyl chains on the bottom or top layer of the double-deck assemblies were selectively visualized by carefully tuning the scanning tunneling microscopy settings. A method to easily identify mirror image domains was discovered based on the coincidence of domain boundaries with a graphite main axis. The effect of molecular symmetry and metal complexation on the formation of the double-deck assembly was also explored. Based on 2D crystal engineering principles, this bottom-up double-deck assembly can potentially provide an essential toehold for constructing precise 3D hierarchical structures.

A 2D Substitutional Solid Solution through Hydrogen Bonding of Molecular Building Blocks

Two-dimensional (2D) molecular self-assembly allows for the formation of well-defined supramolecular layers with tailored geometrical, compositional, and chemical properties. To date, random intermixing and entropic effects in these systems have largely been associated with crystalline disorder and glassy phases. Here we describe a 2D crystalline self-assembled molecular system that exhibits random incorporation of substitutional molecules. The lattice is formed from a mixture of trimesic acid (TMA) and terthienobenzenetricarboxylic acid (TTBTA), C₃-symmetric hydrogen-bonding units of very different sizes (0.79 and 1.16 nm, respectively), at the solution-highly oriented pyrolitic graphite (HOPG) interface. Remarkably, the TTBTA substitutes into the TMA lattice at a fixed stoichiometry near 12%. The resulting lattice constant is consistent with Vegard's law prediction for an alloy with a composition TMA_0.88TTBTA_0.12, and the substrate orientation of the lattice is defined by an epitaxial relation with the HOPG substrate. The Gibbs free energy for the TMA/TTBTA lattice was elucidated by considering the entropy of intermixing, via Monte Carlo simulations of multiplicity of the substitutional lattices, and the enthalpy of intermixing, via density functional theory calculations. The latter show that both the bond enthalpy of the H-bonded lattice and the adsorption enthalpy of the molecule/substrate interactions play important roles. This work provides insight into the manifestation of entropy in a molecular crystal constrained by both epitaxy and intermolecular interactions and demonstrates that a randomly intermixed yet crystalline 2D solid can be formed through hydrogen bonding of molecular building blocks of very different size.

Synthesis of Macrocyclic Poly(3-hexylthiophene) and Poly(3-heptylselenophene) by Alkyne Homocoupling

Here we report the synthesis of cyclic samples of poly(3-hexylthiophene) (P3HT, degrees of polymerization = 25, 40, and 75) and poly(3-heptylselenophene) (P37S, DP = 30). Cyclization was accomplished using a mild alkyne-alkyne homocoupling procedure. Alkyne-terminated poly(ethylene glycol) was then coupled to residual uncyclized polymers, which were subsequently removed by column chromatography, enabling isolation and characterization of pure cyclic polymers. Cyclization was confirmed by the disappearance of terminal alkyne protons, the decrease in hydrodynamic radius [measured by size exclusion chromatography (SEC)], and the observed identical molecular weight distribution [measured by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry]. The lower weight macrocyclic polymers have decreased self-assembly as measured by optical absorption and transmission electron microscopy. The highest weight macrocycles were imaged using scanning tunneling microscopy. Cyclic polymers adopted a tightly bent conformation, while their linear analogues assembled as fully extended chains. Our method of cyclization and purification is broadly applicable to conjugated polymers (CPs) and will enable the development of novel optoelectronic materials.

Hydrogen bonding vs. molecule-surface interactions in 2D self-assembly of [C60]fullerenecarboxylic acids

The adsorption of C₆₀-malonic derivatives C₆₁(CO₂H)₂ and C₆₆(CO₂H)₁₂ on Au(111) and a pentafluorobenzenethiol-modified Au substrate (PFBT@Au) has been investigated using scanning tunneling microscopy (STM) at a liquid-solid interface. Monofunctionalized C₆₁(CO₂H)₂ forms a hexagonal close-packed overlayer on Au(111) and individual aligned dimers on PFBT@Au(111). The difference is attributed to the nature of the substrateC₆₁(CO₂H)₂ interaction (isotropic π-Au bonding vs. anisotropic PFBTCOOH interactions). Surprisingly, in both cases, the directionality of the COOHCOOH motif is compromised in favor of synergistic van der Waals/H bonding interactions. Such van der Waals contacts are geometrically unfeasible in hexafunctionalized C₆₆(CO₂H)₁₂ and its assembly on Au(111) leads to a 2D molecular network controlled exclusively by H bonding. For both molecules, the "free" CO₂H groups on the monolayer surface can engage in out-of-plane H bonding interaction resulting in the epitaxial growth of subsequent molecular layers.