Implementation of the anaerobic digestion model (ADM1) in the PHREEQC chemistry engine

Anaerobic digestion is state-of-the-art technology to treat sludge and effluents from various industries. Modelling and optimisation of digestion operations can be advantageously performed using the anaerobic digestion model (ADM1) from the International Water Association. The ADM1, however, lacks a proper physico-chemical framework, which makes it difficult to consider wastewater of complex ionic composition and supersaturation phenomena. In this work, we present a direct implementation of the ADM1 within the PHREEQC chemistry engine. This makes it possible to handle ionic strength effects and ion-pairing. Thus, multiple mineral precipitation phenomena can be handled while resolving the ADM1. All these features can be accessed with very little programming effort, while retaining the full power and flexibility of PHREEQC. The distributed PHREEQC code can be easily interfaced with process simulation software for future plant-wide simulation of both wastewater and sludge treatment.

Forming microbial anodes with acetate addition decreases their capability to treat raw paper mill effluent

Microbial anodes were formed under polarization at -0.3 V/SCE on graphite plates in effluents from a pulp and paper mill. The bioanodes formed with the addition of acetate led to the highest current densities (up to 6A/m(2)) but were then unable to oxidize the raw effluent efficiently (0.5A/m(2)). In contrast, the bioanodes formed without acetate addition were fully able to oxidize the organic matter contained in the effluent, giving up to 4.5A/m(2) in continuous mode. Bacterial communities showed less bacterial diversity for the acetate-fed bioanodes compared to those formed in raw effluents. Deltaproteobacteria were the most abundant taxonomic group, with a high diversity for bioanodes formed without acetate addition but with almost 100% Desulfuromonas for the acetate-fed bioanodes. The addition of acetate to form the microbial anodes induced microbial selection, which was detrimental to the treatment of the raw effluent.

Experimental and theoretical characterization of microbial bioanodes formed in pulp and paper mill effluent in electrochemically controlled conditions

Microbial bioanodes were formed in pulp and paper effluent on graphite plate electrodes under constant polarization at -0.3 V/SCE, without any addition of nutriment or substrate. The bioanodes were characterized in 3-electrode set-ups, in continuous mode, with hydraulic retention times from 6 to 48 h and inlet COD from 500 to 5200 mg/L. Current densities around 4A/m(2) were obtained and voltammetry curves indicated that 6A/m(2) could be reached at +0.1 V/SCE. A theoretical model was designed, which allowed the effects of HRT and COD to be distinguished in the complex experimental data obtained with concomitant variations of the two parameters. COD removal due to the electrochemical process was proportional to the hydraulic retention time and obeyed a Michaelis-Menten law with respect to the COD of the outlet flow, with a Michaelis constant KCOD of 400mg/L. An inhibition effect occurred above inlet COD of around 3000 mg/L.

Lowering the applied potential during successive scratching/re-inoculation improves the performance of microbial anodes for microbial fuel cells

Microbial anodes were formed under polarisation at -0.2V/SCE on smooth graphite plate electrodes with paper mill effluents. Primary, secondary and tertiary biofilms were formed by a successive scratching and re-inoculation procedure. The secondary and tertiary biofilms formed while decreasing the polarisation potential allowed the anodes to provide current density of 6A/m(2) at -0.4V/SCE. In contrast, applying -0.4V/SCE initially to form the primary biofilms did not lead to the production of current. Consequently, the scratching/re-inoculation procedure combined with progressive lowering of the applied potential revealed an efficient new procedure that gave efficient microbial anodes able to work at low potential. The observed progressive pH drift to alkaline values above 9 explained the open circuit potentials as low as -0.6 V/SCE. The remarkable performance of the electrode at alkaline pH was attributed to the presence of Desulfuromonas acetexigens as the single dominant species in the tertiary microbial anodes.

Occurrence and control of filamentous bulking in aerated wastewater treatment plants of the French paper industry

The occurrence of filamentous bacteria was investigated in 15 French pulp and paper activated sludge wastewater treatment plant (WWTP). Large filamentous populations were present in most of the plants. Identification carried out with conventional methods based on morphological features and staining techniques showed that the four main filamentous bacteria encountered in these industrial WWTP and responsible for bulking belong to the genera Thiothrix sp., Type 021 N, Haliscomenobacter hydrossis and Type 0092. During two years a specific survey was performed for three of these WWTP showing recurrent bulking phenomena. Data from WWTP performance, chemical data and filaments characterization were compared to correlate the presence of specific filaments with process operating conditions.

Improvement of heavy metal biosorption by mycelial dead biomasses (Rhizopus arrhizus, Mucor miehei and Penicillium chrysogenum): pH control and cationic activation

Fungal mycelial by-products from fermentation industries present a considerable affinity for soluble metal ions (e.g. Zn, Cd, Ni, Pb, Cr, Ag) and could be used in biosorption processes for purification of contaminated effluents. In this work the influence of pH on sorption parameters is characterized by measuring the isotherms of five heavy metals (Ni, Zn, Cd, Ag and Pb) with Rhizopus arrhizus biomass under pH-controlled conditions. The maximum sorption capacity for lead was observed at pH 7.0 (200 mg g-1), while silver uptake was weakly affected. The stability of metal-biosorbent complexes is regularly enhanced by pH neutralization, except for lead. A transition in sorption mechanism was observed above pH 6.0. In addition, comparison of various industrial fungal biomasses (R. arrhizus, Mucor miehei and Penicillium chrysogenum) indicated important variations in zinc-binding and buffering properties (0.24, 0.08 and 0.05 mmol g-1, respectively). Without control, the equilibrium pH (5.8, 3.9 and 4.0) is shown to be related to the initial calcium content of the biosorbent. pH neutralization during metal adsorption increases zinc sorption in all fungi (0.57, 0.52 and 0.33 mmol g-1) but an improvement was also obtained (0.34, 0.33 and 0.10 mmol g-1) by calcium saturation of the biomass before heavy metal accumulation. Breakthrough curves of fixed bed biosorbent columns demonstrated the capacity of the biosorbent process to purify zinc and lead solutions in continuous-flow systems, and confirmed the necessity for cationic activation of the biosorbent before contact with the heavy-metal solution.

A small percentage of influenza virus M1 protein contains zinc but zinc does not influence in vitro M1-RNA interaction

A peptide containing the CCHH motif, the putative zinc-binding sequence of influenza virus M1 protein, was found to bind zinc in a one-to-one complex with the characteristics of a typical zinc-binding peptide. Intact influenza virus also contained zinc and we show that this zinc is bound to the M1 protein in the virus. However, only a small proportion of M1 contained zinc: 4% in virus and 6 to 9% in isolated protein. One strain, B/Yamagata/16/88, consistently contained more zinc: 15 to 20% both in virus and in isolated protein. We also determined the RNA binding and transcription inhibition activities of various M1 proteins and found that the zinc content of M1 had no influence on either activity. We suggest that the zinc in M1 has a structural role in the virion other than nucleic acid binding.

Rapid typing of tandemly repeated hypervariable loci by the polymerase chain reaction: application to the apolipoprotein B 3' hypervariable region

The 3' flanking region of the apolipoprotein B (apoB) gene contains a hypervariable region consisting of a variable number of tandemly repeated short A + T-rich DNA sequences (VNTRs). We present a general method that utilizes the polymerase chain reaction to rapidly and accurately type this and other VNTR loci. We use tailored oligonucleotides and thermostable Taq polymerase to amplify the targeted region. The amplification products are directly visualized after agarose gel electrophoresis. Twelve alleles were readily identified in a sample of 125 unrelated individuals. The alleles differ with respect to the length of the amplified gene region. This genetic variability is inherited in an autosomal codominant manner. DNA sequence data indicate that individual alleles differ in the number of repeat units and the sensitivity of the technique is such that alleles differing in length by only 32 base pairs are readily distinguishable. A system of nomenclature based on the number of repeat units is suggested; an allele containing 37 repeat units is designated 3' beta 37, one containing 35 units is 3' beta 35, and so on. The frequency distribution of the 12 apoB VNTR alleles is bimodal with peaks at 37 and 47 repeat units and a nadir near 43 repeat units. We estimate that the 3' apoB VNTR locus has a heterozygosity index of 0.75 and a polymorphic information content of 0.73. It is a highly informative marker for genetic linkage studies on chromosome 2 and clinical and epidemiological studies involving the apoB gene. The high sensitivity and inexpensive nature of this technique make it superior to traditional Southern blot analysis for typing the 3' apoB VNTR. The method described is also directly applicable for rapid typing of other VNTRs in the human genome.