Confined liquid crystallization governed by electric field for API crystal polymorphism screening and massive preparation

Active pharmaceutical ingredients (APIs) crystal preparation is a significant issue for the pharmaceutical development attributed to the effect on anti-inflammatory, anti-bacteria, and anti-viral, etc. While, the massive preparation of API crystal with high polymorphism selectivity is still a pendent challenge. Here, we firstly proposed a criterion according to the molecular aggregation, molecular orientation, and hydrogen bond energy between INA molecules from molecular dynamics (MD) simulations, which predicted the hydrogen bond architecture in crystal under different electric fields, hinting the recognition of crystal polymorphism. Then, an electric field governing confined liquid crystallization was constructed to achieve the INA crystal polymorphism screening relying on the criterion. Further, magnifying confined liquid volume by 5000 times from 1.0 μL to 5.0 mL realized the massive preparation of INA crystal with high polymorphic purity (>98.4%), giving a unique pathway for crystal engineering and pharmaceutical industry on the development of innovative and generic API based drugs.

Completely Methylene-Free Side Chain Enables Significant Microphase Separation at Medium IECs for Fuel-Cell Anion Exchange Membranes

The introduction of hydrophobic side chain structures in anion exchange membranes (AEMs) to facilitate ion transport has been widely studied; however, low or moderate hydrophobic hydrocarbon and semifluorinated side chains are insufficient to induce a high degree of microphase separation. Herein, we design and prepare poly(aryl piperidinium) AEMs with completely methylene-free perfluorinated side chains, which can maximize the thermodynamic incompatibility between main- and side chains, thus enhancing microphase separation at medium ion exchange capacities (IECs). According to the molecular dynamics study, the methylene-free perfluorinated side chain leads to better hydration of cations. The hydroxide conductivity of the methylene-free perfluorinated side chain-grafted PAP-pF-1 membrane reaches 124.9 mS cm-1 at 80 °C, and the PAP-sF-1 with semifluorinated side chains and PAP-CH-1 with hydrocarbon side chains show lower conductivity (116.8 and 104.0 mS cm-1). The H2/O2 fuel cell using the PAP-pF-1 membrane demonstrates a remarkable peak power density (1651 mW cm-2 at 80 °C) and durability (greater than 300 h). This work provides a novel insight into enhancing microphase separation in AEMs; it opens up new possibilities for developing high-performance AEMs.

Hydrogel Nanoparticles Enable Nucleation Barrier Regulation and Ion Anchoring as an Alternative Pathway for Monosodium Urate Monohydrate Crystallization Control

Gout flare-up, commonly resulting from monosodium urate monohydrate (MSUM) crystallization, has led to painful inflammatory arthritis among hundreds of millions of people. Herein, a kind of hydrogel nanoparticles (HNPs) with specific properties was developed, aimed at providing a promising pathway for MSUM crystallization control. The experimental and molecular dynamics simulation results synchronously indicate that the fabricated HNPs achieve efficient inhibition of MSUM crystallization governed by the mechanism of "host-guest interaction" even under very low-dose administration. HNPs as the host dispersed in the hyperuricemic model effectively lift the relative heterogeneous nucleation barrier of the MSUM crystal and hinder solute aggregation with strong electronegativity and hydrophobicity. The initial appearance of MSUM crystals was then delayed from 94 to 334 h. HNPs as the guest on the surface of the formed crystal can decelerate the growth rate by anchoring ions and occupying the active sites on the surface, and the terminal yield of the MSUM crystal declined to less than 1% of the control group. The good biocompatibility of HNPs (cell viability > 94%) renders it possible for future clinical applications. This study can guide the rational design of inhibitory nanomaterials and the development of their application in the control of relevant pathological crystallization.

Multi-heterostructured MXene/NiS2/Co3S4 with S-Vacancies to Promote Polysulfide Conversion in Lithium-Sulfur Batteries

The severe shuttle effect of polysulfides (LiPSs) and the slow liquid-solid phase conversion are the main obstacles hindering the practical application of lithium-sulfur (Li-S) batteries. Separator modification with a high-activity catalyst can boost LiPSs conversion and suppress their shuttle effect. In this work, multi-heterostructured MXene/NiS2/Co3S4 with rich S-vacancies was constructed facilely with a hydrothermal and high-temperature annealing strategy for separator modification. The MXene sheet not only provides a physical barrier but also ensures a high conductivity and adsorption capacity of the catalyst; the dual active centers of NiS2 and Co3S4 catalyze LiPSs conversion. In addition, the vacancies and heterostructures can modulate the electronic structure of the catalyst, improve its intrinsic activity, and reduce the polysulfides reaction barrier, thus facilitating ion/electron transport and inhibiting the shuttle effect. Benefiting from these advantages, the Li-S battery with MXene/NiS2/Co3S4 modified separator exhibits exciting discharge capacities (1495.4 mAh g-1 at 0.1C and 549.0 mAh g-1 at 6C) and an excellent ultra-long cycle life (average capacity decay rate of 0.026% for 2000 cycles at 2C); at a high sulfur loading of 10.0 mg cm-2, the battery operates for nearly 80 cycles at 0.2C, giving a capacity retention rate of 75.76%. This work provides a high-activity catalyst for Li-S batteries.

Regulation of Hard Segment Cluster Structures for High-performance Poly(urethane-urea) Elastomers

Elastomers are widely used in daily life; however, the preparation of degradable and recyclable elastomers with high strength, high toughness, and excellent crack resistance remains a challenging task. In this report, a polycaprolactone-based poly(urethane-urea) elastomer is presented with excellent mechanical properties by optimizing the arrangement of hard segment clusters. It is found that long alkyl chains of the chain extenders lead to small and evenly distributed hard segment clusters, which is beneficial for improving mechanical properties. Together with the multiple hydrogen bond structure and stress-induced crystallization, the obtained elastomer exhibits a high strength of 63.3 MPa, an excellent toughness of 431 MJ m-3 and an outstanding fracture energy of 489 kJ m-2, while maintaining good recyclability and degradability. It is believed that the obtained elastomer holds great promise in various application fields and it contributes to the development of a sustainable society.

Rose-like NiCo2O4 with Atomic-Scale Controllable Oxygen Vacancies for Modulating Sulfur Redox Kinetics in Lithium-Sulfur Batteries

The long-term stability of Li-S batteries is significantly compromised by the shuttle effect and insulating nature of active substance S, constraining their commercialization. Developing efficient catalysts to mitigate the shuttle effect of lithium polysulfides (LiPSs) is still a challenge. Herein, we designed and synthesized a rose-like cobalt-nickel bimetallic oxide catalyst NiCo2O4-OV enriched with oxygen vacancies (OV) and verified the controllable synthesis of different contents of OV. Introducing the OV proved to be an efficient approach for controlling the electronic structure of the electrocatalyst and managing the absorption/desorption processes on the reactant surface, thereby addressing the challenges posed by the LiPS shuttle effect and sluggish transformation kinetics in Li-S batteries. In addition, we investigated the effect of OV in NiCo2O4 on the adsorption capacity of LiPSs using adsorption experiments and density functional theory (DFT) simulations. With the increase in the level of OV, the binding energy between the two is enhanced, and the adsorption effect is more obvious. NiCo2O4-OV contributes to the decomposition of Li2S and diffusion of Li+ in Li-S batteries, which promotes the kinetic process of the batteries.

Continuous Covalent Organic Frameworks Membranes: From Preparation Strategies to Applications

Covalent organic frameworks (COFs) are porous crystalline polymeric materials formed by the covalent bonding of organic units. The abundant organic units library gives the COFs species diversity, easily tuned pore channels, and pore sizes. In addition, the periodic arrangement of organic units endows COFs regular and highly connected pore channels, which has led to the rapid development of COFs in membrane separations. Continuous defect-free and high crystallinity of COF membranes is the key to their application in separations, which is the most important issue to be addressed in the research. This review article describes the linkage types of covalent bonds, synthesis methods, and pore size regulation strategies of COFs materials. Further, the preparation strategies of continuous COFs membranes are highlighted, including layer-by-layer (LBL) stacking, in situ growth, interfacial polymerization (IP), and solvent casting. The applications in separation fields of continuous COFs membranes are also discussed, including gas separation, water treatment, organic solvent nanofiltration, ion conduction, and energy battery membranes. Finally, the research results are summarized and the future prospect for the development of COFs membranes are outlined. More attention may be paid to the large-scale preparation of COFs membranes and the development of conductive COFs membranes in future research.

Mott-Schottky MXene@WS2 Heterostructure: Structural and Thermodynamic Insights and Application in Ultra Stable Lithium-Sulfur Batteries

Due to the "shuttle effect" and low conversion kinetics of polysulfides, the cycle stability of lithium sulfur (Li-S) battery is unsatisfactory, which hinders its practical application. The Mott-Schottky heterostructures for Li-S batteries not only provide more catalytic/adsorption active sites, but also facilitate electrons transport by a built-in electric field, which are both beneficial for polysulfides conversion and long-term cycle stability. Here, MXene@WS2 heterostructure was constructed by in-situ hydrothermal growth for separator modification. In-depth ultraviolet photoelectron spectroscopy and ultraviolet visible diffuse reflectance spectroscopy analysis reveals that there is an energy band difference between MXene and WS2 , confirming the heterostructure nature of MXene@WS2 . DFT calculations indicate that the Mott-Schottky MXene@WS2 heterostructure can effectively promote electron transfer, improve the multi-step cathodic reaction kinetics, and further enhance polysulfides conversion. The built-in electric field of the heterostructure plays an important role in reducing the energy barrier of polysulfides conversion. Thermodynamic studies reveal the best stability of MXene@WS2 during polysulfides adsorption. As a result, the Li-S battery with MXene@WS2 modified separator exhibits high specific capacity (1613.7 mAh g-1 at 0.1 C) and excellent cycling stability (2000 cycles with 0.0286 % decay per cycle at 2 C). Even at a high sulfur loading of 6.3 mg cm-2 , the specific capacity could be retained by 60.0 % after 240 cycles at 0.3 C. This work provides deep structural and thermodynamic insights into MXene@WS2 heterostructure and its promising prospect of application in high performance Li-S batteries.

Thin continuous membrane coating with high surface energy for comprehensive antifouling seawater distillation

Membrane distillation (MD) has prominent advantages such as treating high-salinity wastewater with a low-grade thermal energy, high salt rejection, and zero discharge. However, organic fouling and mineral scaling are two major challenges for hydrophobic MD membranes when used for practical applications. Commonly, improving organic fouling- and mineral scaling-resistance require oppositely enhanced wetting properties of membrane, thus is difficult to simultaneously realize dual resistance with one membrane. Here, we proposed to use underwater thermodynamically stable high-surface-energy coating to modify the hydrophobic membrane with Janus structures comprising different surface energy. The underlayered structure meets the hydrophobicity requirements of the MD membrane, while the coating layer realizes dual resistance to organic and inorganic foulants. Theoretical analysis and experimental proof reveal that the membrane with the high-surface-energy coating layer outperforms the pristine one with approximately 10 times of longevity. This strategy provides a new way for the use of high-surface-energy materials in versatilely fouling-resistant MD process.

Amidoxime Modified UiO-66@PIM-1 Mixed-Matrix Membranes to Enhance CO2 Separation and Anti-Aging Performance

Mixed matrix membranes (MMMs) generally have some fatal defects, such as poor compatibility between the two phases leading to non-selective pores. In this work, PIM-1 was chosen as the polymer matrix, and UiO-66 modified with amidoxime (UiO-66-AO) was used as the filler to prepare the MMMs. In the MMMs, the amino and hydroxyl groups on UO-66-AO form a rich hydrogen bond network with the N and O atoms in the polymer PIM-1 chain to improve the compatibility between the polymer matrix and the filler. In addition, the selective adsorption of CO2 by the amidoxime group can promote the transport of CO2 in the membrane, which enhances the gas selectivity. The CO2 permeability and CO2/N2 selectivity of UiO-66-AO@PIM-1 MMMs are increased by 35.2% and 45.2% compared to pure PIM-1 membranes, reaching 7535.5 Barrer and 26.9, surpassing the Robeson Upper Bound (2008) and close to the 2019 Upper Bound. After 38 days of the aging experiment, the CO2 permeability is approximately 74% of the original. The results show that the addition of UiO-66-AO has an obvious effect on improving the aging properties of the membrane. The UiO-66-AO@PIM-1 MMMs have a bright prospect for CO2 separation in the future.

Enhancing Electron Conductivity and Electron Density of Single Atom Based Core-Shell Nanoboxes for High Redox Activity in Lithium Sulfur Batteries

Herein, an integrated structure of single Fe atom doped core-shell carbon nanoboxes wrapped by self-growing carbon nanotubes (CNTs) is designed. Within the nanoboxes, the single Fe atom doped hollow cores are bonded to the shells via the carbon needles, which act as the highways for the electron transport between cores and shells. Moreover, the single Fe atom doped nanobox shells is further wrapped and connected by self-growing carbon nanotubes. Simultaneously, the needles and carbon nanotubes act as the highways for electron transport, which can improve the overall electron conductivity and electron density within the nanoboxes. Finite element analysis verifies the unique structure including both internal and external connections realize the integration of active sites in nano scale, and results in significant increase in electron transfer and the catalytic performance of Fe-N4 sites in both Li2 Sn lithiation and Li2 S delithiation. The Li-S batteries with the double-shelled single atom catalyst delivered the specific capacity of 702.2 mAh g-1 after 550 cycles at 1.0 C. The regional structure design and evaluation method provide a new strategy for the further development of single atom catalysts for more electrochemical processes.

Design and Optimization of a Novel Hybrid Membrane-Electrochemical Hydrogen Pump Process for Recovering Helium from NRU off Gas

Due to the low boiling point of helium, the nitrogen-rich off gas of the nitrogen rejection unit (NRU) in the liquefied natural gas (LNG) plant usually contains a small amount of CH₄, approximately 1-4% He, and associated gases, such as H₂. However, it is difficult to separate hydrogen and helium. Here, we propose two different integrated processes coupled with membrane separation, pressure swing adsorption (PSA), and the electrochemical hydrogen pump (EHP) based on different sequences of hydrogen gas removal. Both processes use membrane separation and PSA in order to recover and purify helium, and the EHP is used to remove hydrogen. The processes were strictly simulated using UniSim Design, and an economic assessment was conducted. The results of the economic assessment show that flowsheet #2 was more cost-effective due to the significant reduction in the capacity of the compressor and PSA because of the pre-removal of hydrogen. Additionally, using the response surface methodology (RSM), a Box-Behnken design experiment was conducted, and an accurate and reliable quadratic response surface regression model was fitted through variance analysis. The optimized operating parameters for the integrated process were determined as follows: the membrane area of M101 was 966.6 m², the permeate pressure of M101 was 100 kPa, and the membrane area of M102 was 41.2 m². The maximum recovery fraction was 90.66%, and the minimum cost of helium production was 2.21 $/kg. Thus, proposed flowsheet #2 has prospects and value for industrial application.

Tailored hydrogel composite membrane for the regulated crystallization of monosodium urate monohydrate within coffee's metabolites system

Herein, a facile bionic research platform with fabricated hydrogel composite membrane (HCM) is constructed to uncover the effects of the main components of coffee's metabolites on MSUM crystallization. Tailored and biosafety polyethylene glycol diacrylate/N-isopropyl acrylamide (PEGDA/NIPAM) HCM allows the proper mass transfer of coffee's metabolites and can well simulate the process of coffee's metabolites acting in the joint system. With the validations of this platform, it is shown that chlorogenic acid (CGA) can hinder the MSUM crystals formation from 45 h (control group) to 122 h (2 mM CGA), which is the most likely reason that reduces the risk of gout after long-term coffee consumption. Molecular dynamics simulation further indicates that the high interaction energy (E_int) between CGA and MSUM crystal surface and the high electronegativity of CGA both contribute to the restraint of MSUM crystal formation. In conclusion, the fabricated HCM, as the core functional materials of the research platform, presents the understanding of the interaction between coffee consumption and gout control.

Polarized tip-enhanced Raman spectroscopy at liquid He temperature in ultrahigh vacuum using an off-axis parabolic mirror

Tip-enhanced Raman spectroscopy (TERS) combines inelastic light scattering well below the diffraction limit down to the nanometer range and scanning probe microscopy and, possibly, spectroscopy. In this way, topographic and spectroscopic as well as single- and two-particle information may simultaneously be collected. While single molecules can now be studied successfully, bulk solids are still not meaningfully accessible. It is the purpose of the work presented here to outline approaches toward this objective. We describe a home-built, liquid helium cooled, ultrahigh vacuum TERS. The setup is based on a scanning tunneling microscope and, as an innovation, an off-axis parabolic mirror having a high numerical aperture of ∼0.85 and a large working distance. The system is equipped with a fast load-lock chamber, a chamber for the in situ preparation of tips, substrates, and samples, and a TERS chamber. Base pressure and temperature in the TERS chamber were ∼3 × 10-11 mbar and 15 K, respectively. Polarization dependent tip-enhanced Raman spectra of the vibration modes of carbon nanotubes were successfully acquired at cryogenic temperature. The new features described here including very low pressure and temperature and the external access to the light polarizations, thus the selection rules, may pave the way toward the investigation of bulk and surface materials.

Yeast enrichment facilitated lipid removal and bioconversion by black soldier fly larvae in the food waste treatment

Food waste can be converted into insectile fatty acids (FAs) by the larvae of black soldier fly (BSFL), Hermetia illucens, for use in the feed sector or as a source of biodiesel. However, waste oil was less decomposed than carbohydrate or protein in frass due to the limitation of larval lipid metabolism. In this study, 10 yeast strains were screened, corresponding to six species, to examine their capacity of improving lipid transformation performance by BSFL. The species of Candida lipolytica was superior to the other five species, which exhibited significantly higher lipid reduction rate (95.0-97.1 %) than the control (88.7 %), and the larval FA yields achieved 82.3-115.5 % of the food waste FA matters, suggesting that BSFL not only transformed waste oil but also biosynthesized FAs from waste carbohydrate and other substances. Further, the CL2 strain of Candida lipolytica was examined for treating food waste containing high lipid content (16-32 %). The lipid removal rate was found improved from 21.4 to 42.3 % (control) to 80.5-93.3% in the waste containing 20-32 % lipid. The upper limit of lipid content that could be endured by BSFL was ≈16 %, and the CL2-enrichment elevated the upper limit to ≈24 %. Fungal community analysis indicated that Candida spp. accounted for the lipid removal improvement. The Candida spp. CL2 strain may facilitate the lipid reduction and transformation by BSFL through microbial catabolizing and assimilation of waste FAs. Altogether, this study suggests that yeast enrichment is feasible in improving lipid transformation by BSFL especially for food waste exhibiting high lipid content.

Facile Synthesis of Ultra-microporous Pillar-Layered Metal-Organic Framework Membranes for Highly H2-Selective Separation

Recently, pillar-layered MOF materials have attracted much attention and shown great potential in separation application due to their fine pore size/channel and pore surface chemistry tunability and designability. In this work, we reported an effective and universal synthesis strategy for preparing ultra-microporous Ni-based pillar-layered MOF [Ni₂(L-asp)₂(bpy)] (Ni-LAB) and [Ni₂(L-asp)₂(pz)] (Ni-LAP) (L-asp = L-aspartic acid, bpy = 4,4'-bipyridine, pz = pyrazine) membranes on a porous α-Al₂O₃ substrate with high performance and good stability by secondary growth. Through this strategy, the seed size reduction and screening engineering (SRSE) is proposed to obtain uniform sub-micron size MOF seeds by high-energy ball milling-combined solvent deposition. This strategy not only effectively addresses the issue of obtaining the uniform small seeds being significant for secondary growth but also provides an approach for the preparation of Ni-based pillar-layered MOF membranes where the freedom of synthesizing small crystals is lacking. Based on reticular chemistry, the pore size of Ni-LAB was narrowed by making use of shorter pillar ligands of pz instead of the longer pillar ligand of bpy. The prepared ultra-microporous Ni-LAP membranes exhibited a high H₂/CO₂ separation factor of 40.4 with H₂ permeance of 9.69 × 10^-8 mol m^-2 s^-1 Pa^-1 under ambient conditions and good mechanical and thermal stability. The superiority of the tunable pore structure and the remarkable stability of these MOF materials showed great potential for industrial H₂ purification. More importantly, our synthesis strategy demonstrated the generality for preparation of MOF membranes, enabling the regulation of membrane pore size and surface functional groups by reticular chemistry.

Constructing Gas Transmission Pathways in Two-Dimensional Composite Material ZIF-8@BNNS Mixed-Matrix Membranes to Enhance CO2/N2 Separation Performance

Two-dimensional (2D) nanomaterials, due to their high aspect ratio and high specific surface area, which provide a more tortuous pathway for larger gas molecules, are frequently used in membrane separation. However, in mixed-matrix membranes (MMMs), the high aspect ratio and high specific surface area of 2D fillers can increase transport resistance, thereby reducing the permeability of gas molecules. In this work, we combine boron nitride nanosheets (BNNS) with ZIF-8 nanoparticles to develop a novel material, ZIF-8@BNNS, to improve both CO₂ permeability and CO₂/N₂ selectivity. Growth of ZIF-8 nanoparticles on the BNNS surface is achieved using an in-situ growth method where the amino groups of BNNS are complexed with Zn²⁺, creating gas transmission pathways that accelerate CO₂ transmission. The 2D-BNNS material acts as a barrier in MMMs to improve CO₂/N₂ selectivity. The MMMs with a 20 wt.% ZIF-8@BNNS loading achieved a CO₂ permeability of 106.5 Barrer and CO₂/N₂ selectivity of 83.2, surpassing the Robeson upper bound (2008) and demonstrating that MOF layers can efficiently reduce mass transfer resistance and enhance gas separation performance.

MOF-Derived Hollow Carbon Supported Nickel-Cobalt Alloy Catalysts Driving Fast Polysulfide Conversion for Lithium-Sulfur Batteries

Transition-metal compounds can be used as electrocatalysts to expedite polysulfide conversion effectively in lithium-sulfur batteries. However, insufficient conductivity and tedious preparation process still limit their practical applications. In this work, NiCo alloy nanoparticles embedded in hollow carbon spheres (NiCo@HCS) are fabricated via a facile, template-free strategy from the NiCo-metal-organic framework (MOF) precursor and used as electrocatalysts for separator modification. NiCo@HCS can not only improve the adsorption capacity of polysulfides by d-band deviation to the Fermi level but also reduce the energy barrier in the process of catalytic polysulfide conversion. Due to favorable three-dimensional (3-D) morphology, improved adsorption, and promoted kinetics of NiCo@HCS, the battery containing the NiCo@HCS-modified separator gives a starting capacity of 1377 mAh g^-1 at 0.2C, which is retained by 72% over 500 charge/discharge operations at 1.0C current density. Moreover, the battery's start capacity reaches 1180 mAh g^-1 (5.9 mAh cm^-2) with a high sulfur content of 5.0 mg cm^-1 at 0.2C.

From Medical Herb to Functional Food: Development of a Fermented Milk Containing Silybin and Protein from Milk Thistle

Milk thistle is a traditional medicinal herb. Silybin is a medicinal component found in the seed coat of milk thistle, which has liver-protective and anti-cancer properties. Conventional studies have focused on the extraction of silybin with organic reagents, which was inapplicable to the food industry. This study aims to develop a fermented milk containing silybin and protein from the milk thistle seeds. A three step procedure was developed, comprising homogenization of milk thistle seeds, NaHCO₃ heat treatment, and microbial fermentation. The silybin was characterized by high performance liquid chromatography, and the protein was quantified and electrophorized. It was found that the homogenization step was essential for the preparation of protein, and the NaHCO₃ heat treatment was the crucial step in obtaining silybin. The optimal NaHCO₃ treatment settings were 1% NaHCO₃, 60°C, and 3 h, and the optimal strains for microbial fermentation were L131 (Rummeliibacillus stabekisii) and RS72 (Lactobacillus plantarum). The silybin yield in the fermented milk reached 11.24-12.14 mg/g seeds, accounting for 72.6-78.4% of the total silybin in the milk thistle seeds, and the protein yield reached 121.8-129.6 mg/g seeds. The fermented milk had a slightly sweet yoghurt-like flavor and could be used as a dietary supplement for silybin and protein.

Synchronous Design of Membrane Material and Process for Pre-Combustion CO2 Capture: A Superstructure Method Integrating Membrane Type Selection

Membrane separation technology for CO₂ capture in pre-combustion has the advantages of easy operation, minimal land use and no pollution and is considered a reliable alternative to traditional technology. However, previous studies only focused on the H₂-selective membrane (HM) or CO₂-selective membrane (CM), paying little attention to the combination of different membranes. Therefore, it is hopeful to find the optimal process by considering the potential combination of H₂-selective and CO₂-selective membranes. For the CO₂ capture process in pre-combustion, this paper presents an optimization model based on the superstructure method to determine the best membrane process. In the superstructure model, both CO₂-selective and H₂-selective commercial membranes are considered. In addition, the changes in optimal membrane performance and capture cost are studied when the selectivity and permeability of membrane change synchronously based on the Robeson upper bound. The results show that when the CO₂ purity is 96% and the CO₂ recovery rate is 90%, the combination of different membrane types achieves better results. The optimal process is the two-stage membrane process with recycling, using the combination of CM and HM in all situations, which has obvious economic advantages compared with the Selexol process. Under the condition of 96% CO₂ purity and 90% CO₂ recovery, the CO₂ capture cost can be reduced to 11.75$/t CO₂ by optimizing the process structure, operating parameters, and performance of membranes.

Chronological and Carbohydrate-Dependent Transformation of Fatty Acids in the Larvae of Black Soldier Fly Following Food Waste Treatment

Although black soldier fly larvae (BSFL) can convert food waste into insectile fatty acids (FAs), the chronological and diet-dependent transformation of larval FAs has yet to be determined. This study focused on the dynamics of larval FA profiles following food waste treatment and characterized factors that may drive FA composition and bioaccumulation. Larval FA matters peaked on Day 11 as 7.7 ± 0.7% of food waste dry matter, maintained stably from Day 11-19, and decreased slightly from Day 19-21. The BSFL primarily utilized waste carbohydrates for FA bioconversion (Day 0-11) and shifted to waste FAs (Day 7-17) when the carbohydrates were close to depletion. The optimal time window for larvae harvest was Days 17-19, which fulfilled both targets of waste oil removal and larval FA transformation. Larval FAs were dominated by C12:0, followed by C18:2, C18:1, and C16:0. The waste-reducing carbohydrate primarily accounted for larval FA bioaccumulation (r = -0.947, p < 0.001). The increase in diet carbohydrate ratio resulted in the elevation of larval C12:0 yield, which indicated that larval C12:0-FA was primarily biosynthesized from carbohydrates and further transformed from ≥C16 FAs. This study elucidates the bioaccumulation process of larval FAs for food waste treatment and highlights the importance of waste carbohydrates for both the composition and transformation of larval FAs.

Synthesis of the Ni2P-Co Mott-Schottky Junction as an Electrocatalyst to Boost Sulfur Conversion Kinetics and Application in Separator Modification in Li-S Batteries

To overcome the shuttling effect and sluggish conversion kinetics of polysulfides, a large number of catalysts have been designed for lithium-sulfur (Li-S) batteries. Herein, a Mott-Schottky junction catalyst composed of Co nanoparticles and Ni₂P was designed to improve polysulfide kinetics. Our investigations reveal the rearrangement of charges at the Schottky junction interface and the construction of the built-in electric field are crucial for lowering the activation energy of the dissolved Li₂S_n reduction and Li₂S nucleation reaction. Furthermore, a series of experimental and electrochemical tests were performed to demonstrate that the Schottky catalytic effect enhanced the synergistic catalytic effect. With a Ni₂P-Co@CNT catalyst, the battery exhibits an initial specific capacity of 874 mAh g^-1 at a rate of 4.0 C, and the decay rate per cycle is 0.049% in 700 cycles. Meanwhile, the battery shows 0.118% decay rate per cycle at 0.5 C in 100 cycles at a high sulfur loading of 10 mg cm^-2. The Schottky heterojunction structure proposed here has been shown to have a good catalytic effect on the reduction of Li₂S_n and nucleation of Li₂S, which provides a profound guidance for efficient and rational catalyst design.

Bio-Derived and Cost-Effective Membranes with High Selectivity for Redox Flow Batteries Based on Host-Guest Chemistry

Redox flow batteries (RFBs) stand out as a promising energy storage system to solve the grid interconnection problems of renewable energy. Membranes play a critical role in regulating the performance of RFBs, and the selectivity is commonly controlled via either size exclusion or Donnan exclusion. Membranes typically account for 40% of the stack cost of RFBs, and it is essential to develop cost-effective membranes with high selectivity to achieve widespread application. Here, a type of membrane composed of highly abundant materials derived in nature, based on a scalable fabrication process, is reported. Moreover, high selectivity is achieved attributed to the host-guest interactions between membranes and redox species, which effectively alleviate the crossover of redox-active molecules. By incorporating starch into a chitosan matrix for zinc-iodine RFBs, the highly selective recognition of starch and chitosan (host) toward triiodide (guest) builds a "wall" to block the triiodide-based active materials, meanwhile, the conducting properties of such a membrane are not compromised. The proof-of-concept battery delivers a Coulombic efficiency of 98.6% and energy efficiency of 77.4% at a current density of 80 mA cm^-2 , showing the promise of such a novel and cost-effective membrane design beyond traditional selectivity chemistry.

Sacrificial Template Method to Synthesize Atomically Dispersed Mn Atoms on S, N-Codoped Carbon as a Separator Modifier for Advanced Li-S Batteries

Efficient and durable electrocatalysts are important for polysulfide conversion in high-performance Li-S batteries. Herein, we report a sacrificial template strategy to synthesize a sulfur/nitrogen-codoped carbon-supported manganese (Mn) single-atom catalyst (Mn/SNC). The synthesis is enabled by fabricating a novel precursor, i.e., cadmium sulfide (CdS) wrapped with Mn ion-impregnated polyporrole (CdS@Mn-PPy), and subsequent pyrolysis. During pyrolysis, the CdS template is decomposed into Cd and S, PPy-derived carbon is doped with N and S, and Mn ions are reduced to Mn atoms, forming Mn-N active sites. The evaporation of Cd atoms/clusters creates abundant pores in the carbon substrate to expose the active sites and facilitate ion transport, and S atoms can form edge C-S-C bonds to improve the activity of Mn-N sites. Benefiting from the above advantages, the Mn/SNC catalyst markedly enhances the performance of Li-S batteries, delivering an initial capacity of 1563.7 mAh g^-1 at 0.1C, a capacity decay of only 0.037% per cycle after 1600 cycles at 2C; a capacity of 1045.1 mAh g^-1 at a high sulfur loading of 7.44 mg cm^-2 at 0.2C, and a capacity retention of 73.1% after 180 cycles. This work provides a strategy that may benefit further the rational design and development of single-atom catalysts for application in renewable energy.

Thiophilic-Lithiophilic Hierarchically Porous Membrane-Enabled Full Lithium-Sulfur Battery with a Low N/P Ratio

Lithium-sulfur batteries stand out as the next-generation batteries because of their high energy density and low cost. However, the shuttle effect of lithium polysulfides (LiPSs), growth of lithium dendrites, and overuse of lithium resources still hinder their further application. To address these problems, we constructed a porous network structure in which Sn is melted and coated on a frame that has a carbon nanotube (CNT) core and a nitrogen-doped carbon (NC) coating as cross-linking shell (CNT@NC@Sn). This hierarchically porous membrane electrode, which has an ultrahigh porosity of approximately 90%, works as a matrix to strengthen the conductivity of Li+ and electrons and provides enough space for the conversion between sulfur and LiPSs. Moreover, the in situ thin coating of Sn not only promotes the adsorption and catalytic conversion of LiPSs but also provides lithiophilic binding sites and induces uniform lithium deposition. Thus, the thiophilic-lithiophilic porous membrane electrode with lithium loaded on the frame (in the form of Sn-Li alloy) by electroplating can replace lithium sheets, reduce the use of Li, and improve the safety performance of the battery. Additionally, these dual-functional membranes boost the reaction kinetics and conductivity of the cathode by dispersing the sulfur slurry in the porous membrane framework. As a result, the lithium-sulfur full battery assembled with the CNT@NC@Sn integrated membrane electrode exhibits stable cycling with a reversible capacity of 617.1 mAh g-1 after 200 cycles at 1 C. The capacity decay rate per cycle is 0.105%, and the N/P ratio is as low as 2.98.