1
|
An interband cascade laser based heterodyne detector with integrated optical amplifier and local oscillator. NANOPHOTONICS 2024; 13:1759-1764. [PMID: 38681676 PMCID: PMC11052533 DOI: 10.1515/nanoph-2023-0762] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/31/2023] [Accepted: 01/24/2024] [Indexed: 05/01/2024]
Abstract
Heterodyne detection based on interband cascade lasers (ICL) has been demonstrated in a wide range of different applications. However, it is still often limited to bulky tabletop systems using individual components such as dual laser setups, beam shaping elements, and discrete detectors. In this work, a versatile integrated ICL platform is investigated for tackling this issue. A RF-optimized, two-section ICL approach is employed, consisting of a short section typically used for efficient modulation of the cavity field and a long gain section. Such a laser is operated in reversed mode, with the entire Fabry-Pérot waveguide utilized as a semiconductor optical amplifier (SOA) and the electrically separated short section as detector. Furthermore, a racetrack cavity is introduced as on-chip single-mode reference generator. The field of the racetrack cavity is coupled into the SOA waveguide via an 800 nm gap. By external injection of a single mode ICL operating at the appropriate wavelength, a heterodyne beating between the on-chip reference and the injected signal can be observed on the integrated detector section of the SOA-detector.
Collapse
|
2
|
Design and performance of GaSb-based quantum cascade detectors. NANOPHOTONICS 2024; 13:1773-1780. [PMID: 38681680 PMCID: PMC11052536 DOI: 10.1515/nanoph-2023-0702] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/16/2023] [Accepted: 12/21/2023] [Indexed: 05/01/2024]
Abstract
InAs/AlSb quantum cascade detectors (QCDs) grown strain-balanced on GaSb substrates are presented. This material system offers intrinsic performance-improving properties, like a low effective electron mass of the well material of 0.026 m 0, enhancing the optical transition strength, and a high conduction band offset of 2.28 eV, reducing the noise and allowing for high optical transition energies. InAs and AlSb strain balance each other on GaSb with an InAs:AlSb ratio of 0.96:1. To regain the freedom of a lattice-matched material system regarding the optimization of a QCD design, submonolayer InSb layers are introduced. With strain engineering, four different active regions between 3.65 and 5.5 µm were designed with InAs:AlSb thickness ratios of up to 2.8:1, and subsequently grown and characterized. This includes an optimized QCD design at 4.3 µm, with a room-temperature peak responsivity of 26.12 mA/W and a detectivity of 1.41 × 108 Jones. Additionally, all QCD designs exhibit higher-energy interband signals in the mid- to near-infrared, stemming from the InAs/AlSb type-II alignment and the narrow InAs band gap.
Collapse
|
3
|
Mid-infrared Ring Interband Cascade Laser: Operation at the Standard Quantum Limit. ACS PHOTONICS 2024; 11:395-403. [PMID: 38405392 PMCID: PMC10885206 DOI: 10.1021/acsphotonics.3c01159] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/14/2023] [Revised: 12/26/2023] [Accepted: 12/27/2023] [Indexed: 02/27/2024]
Abstract
Many precision applications in the mid-infrared spectral range have strong constraints based on quantum effects that are expressed in particular noise characteristics. They limit, e.g., sensitivity and resolution of mid-infrared imaging and spectroscopic systems as well as the bit-error rate in optical free-space communication. Interband cascade lasers (ICLs) are a class of mid-infrared lasers exploiting interband transitions in type-II band alignment geometry. They are currently gaining significant importance for mid-infrared applications from < 3 to > 6 μm wavelength, enabled by novel types of high-performance ICLs such as ring-cavity devices. Their noise behavior is an important feature that still needs to be thoroughly analyzed, including its potential reduction with respect to the shot-noise limit. In this work, we provide a comprehensive characterization of λ = 3.8 μm-emitting, continuous-wave ring ICLs operating at room temperature. It is based on an in-depth study of their main physical intensity noise features such as their bias-dependent intensity noise power spectral density and relative intensity noise. We obtained shot-noise-limited statistics for Fourier frequencies above 100 kHz. This is an important result for precision applications, e.g., interferometry or advanced spectroscopy, which benefit from exploiting the advantage of using such a shot-noise-limited source, enhancing the setup sensitivity. Moreover, it is an important feature for novel quantum optics schemes, including testing specific light states below the shot-noise level, such as squeezed states.
Collapse
|
4
|
Anomalous Temperature Effect in Weakly Coupled Superlattices: Carrier Transport in a THz Quantum Cascade Laser. PHYSICAL REVIEW LETTERS 2024; 132:046302. [PMID: 38335369 DOI: 10.1103/physrevlett.132.046302] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/13/2023] [Accepted: 12/14/2023] [Indexed: 02/12/2024]
Abstract
We present an investigation into the vertical transport through 13 different superlattice structures, where the well and barrier widths, doping concentration, dopant position, and contact layers were varied. Although superlattices have been extensively studied since 1970, there is a lack of publications on transport through superlattices similarly low doped as THz quantum cascade lasers (QCLs), for which the doping is in the 3-5×10^{10} cm^{-2} range. The superlattices presented are doped in the same range as THz QCLs, with contact layers and fabrication comparable to high-temperature THz QCLs. The temperature-dependent current-voltage characteristics were measured starting from 5 K and an anomalous temperature effect was observed at the first plateau. The measured current through the superlattice first decreases before increasing again with increasing temperature, resulting in the lowest current occurring at 75-110 K. This behavior is also observed in some THz QCLs. The effect disappears for thinner barriers, higher quantum well doping, or modified contact layers, indicating a strong dependency on band bending, due to the large difference in the doping of the contact layers and the superlattice, which is confirmed with multiscattering Büttiker simulations.
Collapse
|
5
|
Beyond Karl Fischer titration: a monolithic quantum cascade sensor for monitoring residual water concentration in solvents. LAB ON A CHIP 2023; 23:1816-1824. [PMID: 36800171 PMCID: PMC10045895 DOI: 10.1039/d2lc00724j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/02/2022] [Accepted: 02/10/2023] [Indexed: 06/18/2023]
Abstract
Quality control of liquids is an important part of analytical chemistry. The gold standard for measuring residual water in organic solvents and pharmaceutical applications is Karl Fischer titration. It has a high sensitivity, selectivity and accuracy. The downsides are a time-consuming offline analysis, together with the need for toxic reagents producing waste, and it suffers from poor inter-laboratory reproducibility. In this work, we present a high-performance lab-on-a-chip sensor exploiting mid-IR spectroscopy for liquid sensing. It is operating at 6.1 μm wavelength and is suitable for robust and flexible real-time in situ analysis of the residual water concentration in isopropyl alcohol. This is demonstrated in two experiments. A custom-made 60 μL flow cell is employed to measure only minute amounts of analyte in an inline configuration. In a second approach, the whole sensor is immersed into the analyte to demonstrate sensitive and rapid in situ operation on the millisecond time scale. This is confirmed by the ability for time resolved single water-droplet monitoring, while they are mixed into the liquid sample. We obtain a limit of detection between 120 ppm and 150 ppm with a concentration coverage spanning three orders of magnitude from 1.2 × 10-2%vol to 25%vol for the flow cell and 1.5 × 10-2%vol to 19%vol in the in situ configuration, respectively.
Collapse
|
6
|
Ultrabroadband Heterogeneous THz Quantum Cascade Laser. ACS PHOTONICS 2023; 10:111-115. [PMID: 36691425 PMCID: PMC9853851 DOI: 10.1021/acsphotonics.2c01202] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/02/2022] [Indexed: 06/17/2023]
Abstract
Broadband emission in the terahertz spectral region is a prerequisite for applications such as spectroscopy or white light sources. Appropriate signal powers and a compact design are advantageous for this use. A technology which meets these requirements are terahertz quantum cascade lasers. These electrically pumped, on-chip semiconductor lasers provide high output powers and the freedom of tailoring their emission wavelength by bandstructure engineering. By combining multiple active region designs emitting at different wavelengths in a single structure, one can obtain broadband emission from a single device. Here, we present a heterogeneous terahertz quantum cascade laser consisting of five individual active regions based on a three-well, LO-phonon depopulation design. The devices lase in pulsed and continuous-wave operation and emit in a spectral range from 1.9 to 4.5 THz, covering a bandwidth of 1.37 octaves. The use of the three-well design, which was optimized for high temperature operation, leads to a maximum operating temperature in the pulsed operation of 143 K.
Collapse
|
7
|
High-responsivity operation of quantum cascade detectors at 9 µm. OPTICS EXPRESS 2022; 30:40188-40195. [PMID: 36298955 DOI: 10.1364/oe.470615] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/14/2022] [Accepted: 09/21/2022] [Indexed: 06/16/2023]
Abstract
Quantum cascade detectors (QCDs) are devices operating at zero external bias with a low dark-current. They show linear detection and high saturation intensities, making them suitable candidates for heterodyne detection in long-wave infrared (LWIR) free space optical communication systems. We present an approach to mitigate the performance limitation at long wavelengths, by a comparison of similar single and multi-period QCDs for optimizing their responsivity and noise behaviour. Our InGaAs/InAlAs/InP ridge QCDs are designed for operation at λ = 9.124 µm. Optical waveguide simulations support the accurate optical characterization. A detailed device analysis reveals room-temperature responsivities of 111 mA/W for the 15-period and 411 mA/W for the single-period device.
Collapse
|
8
|
Deep learning control of THz QCLs. OPTICS EXPRESS 2021; 29:23611-23621. [PMID: 34614624 DOI: 10.1364/oe.430679] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/04/2021] [Accepted: 06/24/2021] [Indexed: 06/13/2023]
Abstract
Artificial neural networks are capable of fitting highly non-linear and complex systems. Such complicated systems can be found everywhere in nature, including the non-linear interaction between optical modes in laser resonators. In this work, we demonstrate artificial neural networks trained to model these complex interactions in the cavity of a Quantum Cascade Random Laser. The neural networks are able to predict modulation schemes for desired laser spectra in real-time. This radically novel approach makes it possible to adapt spectra to individual requirements without the need for lengthy and costly simulation and fabrication iterations.
Collapse
|
9
|
Engineering the spectral bandwidth of quantum cascade laser frequency combs. OPTICS LETTERS 2021; 46:3416-3419. [PMID: 34264227 DOI: 10.1364/ol.424164] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/08/2021] [Accepted: 05/11/2021] [Indexed: 06/13/2023]
Abstract
Quantum cascade lasers (QCLs) facilitate compact optical frequency comb sources that operate in the mid-infrared and terahertz spectral regions, where many molecules have their fundamental absorption lines. Enhancing the optical bandwidth of these chip-sized lasers is of paramount importance to address their application in broadband high-precision spectroscopy. In this work, we provide a numerical and experimental investigation of the comb spectral width and show how it can be optimized to obtain its maximum value defined by the laser gain bandwidth. The interplay of nonoptimal values of the resonant Kerr nonlinearity and cavity dispersion can lead to significant narrowing of the comb spectrum and reveals the best approach for dispersion compensation. The implementation of high mirror losses is shown to be favorable and results in proliferation of the comb sidemodes. Ultimately, injection locking of QCLs by modulating the laser bias around the round trip frequency provides a stable external knob to control the frequency-modulated comb state and recover the maximum spectral width of the unlocked laser state.
Collapse
|
10
|
High-speed interband cascade infrared photodetectors: photo-response saturation by a femtosecond oscillator. OPTICS EXPRESS 2021; 29:14087-14100. [PMID: 33985134 DOI: 10.1364/oe.423498] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/24/2021] [Accepted: 04/13/2021] [Indexed: 06/12/2023]
Abstract
Interband cascade infrared photodetectors (ICIPs) combine interband optical transitions with fast intraband transport to achieve high-frequency and broad-wavelength operation at room temperature. Here we study the bias-dependent electronic impulse response of ICIPs with a mid-infrared synchronously pumped optical parametric oscillator (OPO). Since the OPO produces ultrashort 104-fs pulses, it is possible to probe the impulse response of the ICIP. From this impulse response, we identify two characteristic decay times, indicating the contribution of electron as well as hole carriers. A reverse bias voltage applied to the ICIP reduces both time scales and leads to an increased electrical cut-off frequency. The OPO emits up to 500 mW average power, of which up to 10 mW is directed to the ICIP in order to test its saturation characteristics under short-pulse illumination. The peak of the impulse response profile as well as the average photocurrent experience a gradual saturation behavior, and we determine the corresponding saturation powers by measuring the photo-response as a function of average power directed to the ICIP. We demonstrate that an increasing reverse bias increases the saturation power as well as the responsivity of the ICIP.
Collapse
|
11
|
High-speed quantum cascade detector characterized with a mid-infrared femtosecond oscillator. OPTICS EXPRESS 2021; 29:5774-5781. [PMID: 33726109 DOI: 10.1364/oe.417976] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/18/2020] [Accepted: 01/20/2021] [Indexed: 06/12/2023]
Abstract
Quantum cascade detectors (QCD) are photovoltaic mid-infrared detectors based on intersubband transitions. Owing to the sub-picosecond carrier transport between subbands and the absence of a bias voltage, QCDs are ideally suited for high-speed and room temperature operation. Here, we demonstrate the design, fabrication, and characterization of 4.3 µm wavelength QCDs optimized for large electrical bandwidth. The detector signal is extracted via a tapered coplanar waveguide (CPW), which was impedance-matched to 50 Ω. Using femtosecond pulses generated by a mid-infrared optical parametric oscillator (OPO), we show that the impulse response of the fully packaged QCDs has a full-width at half-maximum of only 13.4 ps corresponding to a 3-dB bandwidth of more than 20 GHz. Considerable detection capability beyond the 3-dB bandwidth is reported up to at least 50 GHz, which allows us to measure more than 600 harmonics of the OPO repetition frequency reaching 38 dB signal-to-noise ratio without the need of electronic amplification.
Collapse
|
12
|
Mode-locked short pulses from an 8 μm wavelength semiconductor laser. Nat Commun 2020; 11:5788. [PMID: 33188222 PMCID: PMC7666187 DOI: 10.1038/s41467-020-19592-1] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/09/2020] [Accepted: 10/11/2020] [Indexed: 11/13/2022] Open
Abstract
Quantum cascade lasers (QCL) have revolutionized the generation of mid-infrared light. Yet, the ultrafast carrier transport in mid-infrared QCLs has so far constituted a seemingly insurmountable obstacle for the formation of ultrashort light pulses. Here, we demonstrate that careful quantum design of the gain medium and control over the intermode beat synchronization enable transform-limited picosecond pulses from QCL frequency combs. Both an interferometric radio-frequency technique and second-order autocorrelation shed light on the pulse dynamics and confirm that mode-locked operation is achieved from threshold to rollover current. Furthermore, we show that both anti-phase and in-phase synchronized states exist in QCLs. Being electrically pumped and compact, mode-locked QCLs pave the way towards monolithically integrated non-linear photonics in the molecular fingerprint region beyond 6 μm wavelength. Producing pulses in the mid-IR often requires bulky sources and has been inaccessible with compact and versatile quantum cascade lasers (QCLs). Here, the authors demonstrate actively mode-locked, mid-IR QCL operation at room temperature.
Collapse
|
13
|
All-optical adaptive control of quantum cascade random lasers. Nat Commun 2020; 11:5530. [PMID: 33139713 PMCID: PMC7606519 DOI: 10.1038/s41467-020-19305-8] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/25/2019] [Accepted: 09/28/2020] [Indexed: 12/03/2022] Open
Abstract
Spectral fingerprints of molecules are mostly accessible in the terahertz (THz) and mid-infrared ranges, such that efficient molecular-detection technologies rely on broadband coherent light sources at such frequencies. If THz Quantum Cascade Lasers can achieve octave-spanning bandwidth, their tunability and wavelength selectivity are often constrained by the geometry of their cavity. Here we introduce an adaptive control scheme for the generation of THz light in Quantum Cascade Random Lasers, whose emission spectra are reshaped by applying an optical field that restructures the permittivity of the active medium. Using a spatial light modulator combined with an optimization procedure, a beam in the near infrared (NIR) is spatially patterned to transform an initially multi-mode THz random laser into a tunable single-mode source. Moreover, we show that local NIR illumination can be used to spatially sense complex near-field interactions amongst modes. Our approach provides access to new degrees of freedom that can be harnessed to create broadly-tunable sources with interesting potential for applications like self-referenced spectroscopy. Tunable quantum cascade lasers can enable applications in multiple areas. Here, the authors demonstrate the adaptive control of the modes and emission spectra of quantum cascade random lasers through a spatially-tailored optical modulation of the active region.
Collapse
|
14
|
In-Phase and Anti-Phase Synchronization in a Laser Frequency Comb. PHYSICAL REVIEW LETTERS 2020; 124:023901. [PMID: 32004013 DOI: 10.1103/physrevlett.124.023901] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/20/2019] [Indexed: 06/10/2023]
Abstract
Coupled clocks are a classic example of a synchronization system leading to periodic collective oscillations. Already in 1665, Christiaan Huygens described this phenomenon as a kind of "sympathy" among oscillators. In this work, we describe the formation of two types of laser frequency combs as a system of oscillators coupled through the beating of the lasing modes. We experimentally show two completely different types of synchronization in a quantum dot laser-in-phase and splay-phase states. Both states can be generated in the same device, just by varying the damping losses of the system. This modifies the coupling among the oscillators. The temporal laser output is characterized using both linear and quadratic autocorrelation techniques. Our results show that both pulses and frequency-modulated states can be generated on demand within the same device. These findings allow us to connect laser frequency combs produced by amplitude-modulated and frequency-modulated lasers and link these to pattern formation in coupled systems such as Josephson-junction arrays.
Collapse
|
15
|
Singular charge fluctuations at a magnetic quantum critical point. Science 2020; 367:285-288. [DOI: 10.1126/science.aag1595] [Citation(s) in RCA: 31] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/06/2018] [Revised: 09/07/2019] [Accepted: 12/05/2019] [Indexed: 11/02/2022]
|
16
|
Thermoelectric-cooled terahertz quantum cascade lasers. OPTICS EXPRESS 2019; 27:20688-20693. [PMID: 31510157 DOI: 10.1364/oe.27.020688] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/14/2019] [Accepted: 06/20/2019] [Indexed: 06/10/2023]
Abstract
We demonstrate the first lasing emission of a thermo-electrically cooled terahertz quantum cascade laser (THz QCL). A high temperature three-well THz QCL emitting at 3.8 THz is mounted to a novel five-stage thermoelectric cooler reaching a temperature difference of ΔT = 124 K. The temperature and time-dependent laser performance is investigated and shows a peak pulse power of 4.4 mW and a peak average output power of 100 μW for steady-state operation.
Collapse
|
17
|
High frequency modulation and (quasi) single-sideband emission of mid-infrared ring and ridge quantum cascade lasers. OPTICS EXPRESS 2019; 27:14716-14724. [PMID: 31163916 DOI: 10.1364/oe.27.014716] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/26/2018] [Accepted: 04/05/2019] [Indexed: 06/09/2023]
Abstract
We investigate the high frequency modulation characteristics of mid-infrared surface-emitting ring and edge-emitting ridge quantum cascade lasers (QCLs). In particular, a detailed comparison between circular ring devices and ridge-QCLs from the same laser material, which have a linear waveguide in a "Fabry-Pérot (FP) type" cavity, reveals distinct similarities and differences. Both device types are single-mode emitting, based on either 2 nd- (ring-QCL) or 1 st-order (ridge-QCL) distributed feedback (DFB) gratings with an emission wavelength around 7.56 μm. Their modulation characteristics are investigated in the frequency-domain using an optical frequency-to-amplitude conversion technique based on the ro-vibrational absorptions of CH 4. We observe that the amplitude of frequency tuning Δf over intensity modulation index m as function of the modulation frequency behaves similarly for both types of devices, while the ring-QCLs typically show higher values. The frequency-to-intensity modulation (FM-IM) phase shift shows a decrease starting from ∼72 ∘ at a modulation frequency of 800 kHz to about 0 ∘ at 160 MHz. In addition, we also observe a quasi single-sideband (qSSB) regime for modulation frequencies above 100 MHz, which is identified by a vanishing -1 st-order sideband for both devices. This special FM-state can be observed in DFB QCLs and is in strong contrast to the behavior of regular DFB diode lasers, which do not achieve any significant sideband suppression. By analyzing these important high frequency characteristics of ring-QCLs and comparing them to ridge DFB-QCLs, it shows the potential of intersubband devices for applications in e.g. novel spectroscopic techniques and highly-integrated and high-bitrate free-space data communication. In addition, the obtained results close an existing gap in literature for high frequency modulation characteristics of QCLs.
Collapse
|
18
|
Suppression of axial growth by boron incorporation in GaAs nanowires grown by self-catalyzed molecular beam epitaxy. NANOTECHNOLOGY 2019; 30:065602. [PMID: 30523852 DOI: 10.1088/1361-6528/aaf11e] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
The addition of boron to GaAs nanowires grown by self-catalyzed molecular beam epitaxy was found to have a strong effect on the nanowire morphology, with axial growth greatly reduced as the nominal boron concentration was increased. Transmission electron microscopy measurements show that the Ga catalyst droplet was unintentionally consumed during growth. Concurrent radial growth, a rough surface morphology and tapering of nanowires grown under boron flux suggest that this droplet consumption is due to reduced Ga adatom diffusion on the nanowire sidewalls in the presence of boron. Modelling of the nanowire growth puts the diffusion length of Ga adatoms under boron flux at around 700-1000 nm. Analyses of the nanowire surfaces show regions of high boron concentration, indicating the surfactant nature of boron in GaAs.
Collapse
|
19
|
Barrier Height Tuning of Terahertz Quantum Cascade Lasers for High-Temperature Operation. ACS PHOTONICS 2018; 5:4687-4693. [PMID: 31037249 PMCID: PMC6482977 DOI: 10.1021/acsphotonics.8b01280] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/10/2018] [Indexed: 06/09/2023]
Abstract
Terahertz quantum cascade lasers (QCLs) are excellent coherent light sources, but are still limited to an operating temperature below 200 K. To tackle this, we analyze the influence of the barrier height for the identical three-well terahertz QCL layer sequence by comparing different aluminum concentrations (x = 0.12-0.24) in the GaAs/Al x Ga1-x As material system, and then we present an optimized structure based on these findings. Electron injection and extraction mechanisms as well as LO-phonon depopulation processes play crucial roles in the efficient operation of these lasers and are investigated in this study. Experimental results of the barrier height study show the highest operating temperature of 186.5 K for the structure with 21% aluminum barriers, with a record k B T max/ℏω value of 1.36 for a three-well active region design. An optimized heterostructure with 21% aluminum concentration and reduced cavity waveguide losses is designed and enables a record operating temperature of 196 K for a 3.8 THz QCL.
Collapse
|
20
|
Abstract
We demonstrate the on-chip generation of twisted light beams from ring quantum cascade lasers. A monolithic gradient index metamaterial is fabricated directly into the substrate side of the semiconductor chip and induces a twist of the light's wavefront. This significantly influences the obtained beam pattern, which changes from a central intensity minimum to a maximum depending on the discontinuity count of the metamaterial. Our design principle provides an interesting alternative to recent implementations of microlasers operating at an exceptional point.
Collapse
|
21
|
Watt-Level Continuous-Wave Emission from a Bifunctional Quantum Cascade Laser/Detector. ACS PHOTONICS 2017; 4:1225-1231. [PMID: 28540324 PMCID: PMC5437807 DOI: 10.1021/acsphotonics.7b00133] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 02/13/2017] [Indexed: 06/07/2023]
Abstract
Bifunctional active regions, capable of light generation and detection at the same wavelength, allow a straightforward realization of the integrated mid-infrared photonics for sensing applications. Here, we present a high performance bifunctional device for 8 μm capable of 1 W single facet continuous wave emission at 15 °C. Apart from the general performance benefits, this enables sensing techniques which rely on continuous wave operation, for example, heterodyne detection, to be realized within a monolithic platform and demonstrates that bifunctional operation can be realized at longer wavelength, where wavelength matching becomes increasingly difficult and that the price to be paid in terms of performance is negligible. In laser operation, the device has the same or higher efficiency compared to the best lattice-matched QCLs without same wavelength detection capability, which is only 30% below the record achieved with strained material at this wavelength.
Collapse
|
22
|
High-Power Growth-Robust InGaAs/InAlAs Terahertz Quantum Cascade Lasers. ACS PHOTONICS 2017; 4:957-962. [PMID: 28470028 PMCID: PMC5407654 DOI: 10.1021/acsphotonics.7b00009] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/05/2017] [Indexed: 06/07/2023]
Abstract
We report on high-power terahertz quantum cascade lasers based on low effective electron mass InGaAs/InAlAs semiconductor heterostructures with excellent reproducibility. Growth-related asymmetries in the form of interface roughness and dopant migration play a crucial role in this material system. These bias polarity dependent phenomena are studied using a nominally symmetric active region resulting in a preferential electron transport in the growth direction. A structure based on a three-well optical phonon depletion scheme was optimized for this bias direction. Depending on the sheet doping density, the performance of this structure shows a trade-off between high maximum operating temperature and high output power. While the highest operating temperature of 155 K is observed for a moderate sheet doping density of 2 × 1010 cm-2, the highest peak output power of 151 mW is found for 7.3 × 1010 cm-2. Furthermore, by abutting a hyperhemispherical GaAs lens to a device with the highest doping level a record output power of 587 mW is achieved for double-metal waveguide structures.
Collapse
|
23
|
Spectrally resolved far-fields of terahertz quantum cascade lasers. OPTICS EXPRESS 2016; 24:25462-25470. [PMID: 27828484 DOI: 10.1364/oe.24.025462] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
We demonstrate a convenient and fast method to measure the spectrally resolved far-fields of multimode terahertz quantum cascade lasers by combining a microbolometer focal plane array with an FTIR spectrometer. Far-fields of fundamental TM0 and higher lateral order TM1 modes of multimode Fabry-Pérot type lasers have been distinguished, which very well fit to the results obtained by a 3D finite-element simulation. Furthermore, multimode random laser cavities have been investigated, analyzing the contribution of each single laser mode to the total far-field. The presented method is thus an important tool to gain in-depth knowledge of the emission properties of multimode laser cavities at terahertz frequencies, which become increasingly important for future sensing applications.
Collapse
|
24
|
Remote Sensing with Commutable Monolithic Laser and Detector. ACS PHOTONICS 2016; 3:1794-1798. [PMID: 27785455 PMCID: PMC5073946 DOI: 10.1021/acsphotonics.6b00603] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/13/2016] [Indexed: 06/06/2023]
Abstract
The ubiquitous trend toward miniaturized sensing systems demands novel concepts for compact and versatile spectroscopic tools. Conventional optical sensing setups include a light source, an analyte interaction region, and a separate external detector. We present a compact sensor providing room-temperature operation of monolithic surface-active lasers and detectors integrated on the same chip. The differentiation between emitter and detector is eliminated, which enables mutual commutation. Proof-of-principle gas measurements with a limit of detection below 400 ppm are demonstrated. This concept enables a crucial miniaturization of sensing devices.
Collapse
|
25
|
Measurement of bound states in the continuum by a detector embedded in a photonic crystal. LIGHT, SCIENCE & APPLICATIONS 2016; 5:e16147. [PMID: 30167188 PMCID: PMC6059927 DOI: 10.1038/lsa.2016.147] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/21/2015] [Revised: 03/31/2016] [Accepted: 04/05/2016] [Indexed: 05/16/2023]
Abstract
We directly measure optical bound states in the continuum (BICs) by embedding a photodetector into a photonic crystal slab. The BICs observed in our experiment are the result of accidental phase matching between incident, reflected and in-plane waves at seemingly random wave vectors in the photonic band structure. Our measurements were confirmed through a rigorously coupled-wave analysis simulation in conjunction with temporal coupled mode theory. Polarization mixing between photonic crystal slab modes was observed and described using a plane wave expansion simulation. The ability to probe the field intensity inside the photonic crystal and thereby to directly measure BICs represents a milestone in the development of integrated opto-electronic devices based on BICs.
Collapse
|
26
|
Abstract
We present the design simulation and characterization of a quantum cascade detector operating at 4.3μm wavelength. Array integration and packaging processes were investigated. The device operates in the 4.3μm CO2 absorption region and consists of 64 pixels. The detector is designed fully compatible to standard processing and material growth methods for scalability to large pixel counts. The detector design is optimized for a high device resistance at elevated temperatures. A QCD simulation model was enhanced for resistance and responsivity optimization. The substrate illuminated pixels utilize a two dimensional Au diffraction grating to couple the light to the active region. A single pixel responsivity of 16mA/W at room temperature with a specific detectivity D* of 5⋅107 cmHz/W was measured.
Collapse
|
27
|
Application of a ring cavity surface emitting quantum cascade laser (RCSE-QCL) on the measurement of H 2S in a CH 4 matrix for process analytics. OPTICS EXPRESS 2016; 24:6572-6585. [PMID: 27136847 DOI: 10.1364/oe.24.006572] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
The present work reports on the first application of a ring-cavity-surface-emitting quantum-cascade laser (RCSE-QCL) for sensitive gas measurements. RCSE-QCLs are promising candidates for optical gas-sensing due to their single-mode, mode-hop-free and narrow-band emission characteristics along with their broad spectral coverage. The time resolved down-chirp of the RCSE-QCL in the 1227-1236 cm-1 (8.15-8.09 µm) spectral range was investigated using a step-scan FT-IR spectrometer (Bruker Vertex 80v) with 2 ns time and 0.1 cm-1 spectral resolution. The pulse repetition rate was set between 20 and 200 kHz and the laser device was cooled to 15-17°C. Employing 300 ns pulses a spectrum of ~1.5 cm-1 could be recorded. Under these laser operation conditions and a gas pressure of 1000 mbar a limit of detection (3σ) of 1.5 ppmv for hydrogen sulfide (H2S) in nitrogen was achieved using a 100 m Herriott cell and a thermoelectric cooled MCT detector for absorption measurements. Using 3 µs long pulses enabled to further extend the spectral bandwidth to 8.5 cm-1. Based on this increased spectral coverage and employing reduced pressure conditions (50 mbar) multiple peaks of the target analyte H2S as well as methane (CH4) could be examined within one single pulse.
Collapse
|
28
|
Advanced gas sensors based on substrate-integrated hollow waveguides and dual-color ring quantum cascade lasers. Analyst 2016; 141:6202-6207. [DOI: 10.1039/c6an01130f] [Citation(s) in RCA: 18] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
The first combination of a ring-shaped vertically emitting quantum cascade laser (riQCL) with a substrate-integrated hollow waveguide (iHWG) is presented.
Collapse
|
29
|
Terahertz Dynamics of a Topologically Protected State: Quantum Hall Effect Plateaus near the Cyclotron Resonance of a Two-Dimensional Electron Gas. PHYSICAL REVIEW LETTERS 2015; 115:247401. [PMID: 26705653 DOI: 10.1103/physrevlett.115.247401] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/01/2015] [Indexed: 06/05/2023]
Abstract
We measure the Hall conductivity of a two-dimensional electron gas formed at a GaAs/AlGaAs heterojunction in the terahertz regime close to the cyclotron resonance frequency using highly sensitive Faraday rotation measurements. The sample is electrically gated, allowing the electron density to be changed continuously by more than a factor of 3. We observe clear plateaulike and steplike features in the Faraday rotation angle vs electron density and magnetic field (Landau-level filling factor) even at fields or frequencies very close to cyclotron resonance absorption. These features are the high frequency manifestation of quantum Hall plateaus-a signature of topologically protected edge states. We observe both odd and even filling factor plateaus and explore the temperature dependence of these plateaus. Although dynamical scaling theory begins to break down in the frequency region of our measurements, we find good agreement with theory.
Collapse
|
30
|
Abstract
We report on gallium droplet nucleation on silicon (100) substrates with and without the presence of the native oxide. The gallium deposition is carried out under ultra-high vacuum conditions at temperatures between 580 and 630 °C. The total droplet volume, obtained from a fit to the diameter-density relation, is used for sample analysis on clean silicon surfaces. Through a variation of the 2D equivalent Ga thickness, the droplet diameter was found to be between 250-1000 nm. Longer annealing times resulted in a decrease of the total droplet volume. Substrate temperatures of 630 °C and above led to Ga etching into the Si substrates and caused Si precipitation around the droplets. In contrast, we obtained an almost constant diameter distribution around 75 nm over a density range of more than two orders of magnitude in the presence of a native oxide layer. Furthermore, the droplet nucleation was found to correlate with the density of surface features on the 'epi-ready' wafer.
Collapse
|
31
|
Quantum cascade detector utilizing the diagonal-transition scheme for high quality cavities. OPTICS EXPRESS 2015; 23:6283-6291. [PMID: 25836849 DOI: 10.1364/oe.23.006283] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
A diagonal optically active transition in a quantum cascade detector is introduced as optimization parameter to obtain quality factor matching between a photodetector and a cavity. A more diagonal transition yields both higher extraction efficiency and lower noise, while the reduction of the absorption strength is compensated by the resonant cavity. The theoretical limits of such a scheme are obtained, and the impact of losses and cavity processing variations are evaluated. By optimizing the quantum design for a high quality cavity, a specific detectivity of 10(9) Jones can be calculated for λ = 8μm and T = 300K.
Collapse
|
32
|
Coupled cavity terahertz quantum cascade lasers with integrated emission monitoring. OPTICS EXPRESS 2015; 23:3581-3588. [PMID: 25836210 DOI: 10.1364/oe.23.003581] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
We demonstrate the on-chip generation and detection of terahertz radiation in coupled cavity systems using a single semiconductor heterostructure. Multiple sections of a terahertz quantum cascade laser structure in a double-metal waveguide are optically coupled and operate either as a laser or an integrated emission monitor. A detailed analysis of the photon-assisted carrier transport in the active region below threshold reveals the detection mechanism for photons emitted by the very same structure above threshold. Configurations with a single laser cavity and two coupled laser cavities are studied. It is shown that the integrated detector can be used for spatial sensing of the light intensity within a coupled cavity.
Collapse
|
33
|
Quantum cascade lasers with a tilted facet utilizing the inherent polarization purity. OPTICS EXPRESS 2014; 22:26294-26301. [PMID: 25401662 DOI: 10.1364/oe.22.026294] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
We report on quantum cascade lasers (QCLs) with a tilted facet utilizing their polarization property. Contrary to diode lasers, QCLs generate purely TM polarized light due to the intersubband selection rules. This property enables the utilization of reflectivity in terms of only TM polarized light (TM reflectivity). The TM reflectivity is reduced by tilting the front facet, resulting in enhanced light output power from the tilted facet. The peak output power of a QCL with a facet angle of 12° are increased by 31 %. The slope efficiency of a QCL with a facet angle of 17° are increased by 43 %. Additionally, a peculiar property of TM reflectivity, the Brewster angle, is investigated by using COMSOL simulations to find its availability in QCLs.
Collapse
|
34
|
Grating-based far field modifications of ring quantum cascade lasers. OPTICS EXPRESS 2014; 22:15829-15836. [PMID: 24977840 DOI: 10.1364/oe.22.015829] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
We present methods for beam modifications of ring quantum cascade lasers emitting around λ = 9μm, which are based on novel distributed feedback grating designs. This includes the creation of a rotationally symmetric far field with a central intensity maximum using an off-center grating as well as the generation of partial radially polarized emission beams induced by a rotation of the grating slits.
Collapse
|
35
|
Resonant metamaterial detectors based on THz quantum-cascade structures. Sci Rep 2014; 4:4269. [PMID: 24608677 PMCID: PMC3948069 DOI: 10.1038/srep04269] [Citation(s) in RCA: 29] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/20/2013] [Accepted: 02/13/2014] [Indexed: 11/09/2022] Open
Abstract
We present the design, fabrication and characterisation of an intersubband detector employing a resonant metamaterial coupling structure. The semiconductor heterostructure relies on a conventional THz quantum-cascade laser design and is operated at zero bias for the detector operation. The same active region can be used to generate or detect light depending on the bias conditions and the vertical confinement. The metamaterial is processed directly into the top metal contact and is used to couple normal incidence radiation resonantly to the intersubband transitions. The device is capable of detecting light below and above the reststrahlenband of gallium-arsenide corresponding to the mid-infrared and THz spectral region.
Collapse
|
36
|
Time-resolved spectral characterization of ring cavity surface emitting and ridge-type distributed feedback quantum cascade lasers by step-scan FT-IR spectroscopy. OPTICS EXPRESS 2014; 22:2656-2664. [PMID: 24663557 DOI: 10.1364/oe.22.002656] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
We present the time-resolved comparison of pulsed 2nd order ring cavity surface emitting (RCSE) quantum cascade lasers (QCLs) and pulsed 1st order ridge-type distributed feedback (DFB) QCLs using a step-scan Fourier transform infrared (FT-IR) spectrometer. Laser devices were part of QCL arrays and fabricated from the same laser material. Required grating periods were adjusted to account for the grating order. The step-scan technique provided a spectral resolution of 0.1 cm(-1) and a time resolution of 2 ns. As a result, it was possible to gain information about the tuning behavior and potential mode-hops of the investigated lasers. Different cavity-lengths were compared, including 0.9 mm and 3.2 mm long ridge-type and 0.97 mm (circumference) ring-type cavities. RCSE QCLs were found to have improved emission properties in terms of line-stability, tuning rate and maximum emission time compared to ridge-type lasers.
Collapse
|
37
|
Abstract
We report on micropillar-based terahertz lasers with active pillars that are much smaller than the emission wavelength. These micropillar array lasers correspond to scaled-down band-edge photonic crystal lasers forming an active photonic metamaterial. In contrast to photonic crystal lasers which use significantly larger pillar structures, lasing emission is not observed close to high-symmetry points in the photonic band diagram, but in the effective medium regime. We measure stimulated emission at 4 THz for micropillar array lasers with pillar diameters of 5 µm. Our results not only demonstrate the integration of active subwavelength optics in a terahertz laser, but are also an important step towards the realization of nanowire-based terahertz lasers.
Collapse
|
38
|
Waveguide saturable absorbers at 1.55 μm based on intraband transitions in GaN/AlN QDs. OPTICS EXPRESS 2013; 21:27578-27586. [PMID: 24514276 DOI: 10.1364/oe.21.027578] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
We report on the design, fabrication and optical characterization of GaN/AlN quantum-dot-based waveguides for all-optical switching via intraband absorption saturation at 1.55 µm. The transmittance of the TM-polarized light increases with the incident optical power due to the saturation of the s-p(z) intraband absorption in the QDs. Single-mode waveguides with a ridge width of 2 µm and a length of 1.5 mm display 10 dB absorption saturation of the TM-polarized light for an input pulse energy of 8 pJ and 150 fs.
Collapse
|
39
|
Tunable insulator-quantum Hall transition in a weakly interacting two-dimensional electron system. NANOSCALE RESEARCH LETTERS 2013; 8:307. [PMID: 23819745 PMCID: PMC3716820 DOI: 10.1186/1556-276x-8-307] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 05/07/2013] [Accepted: 06/26/2013] [Indexed: 06/02/2023]
Abstract
We have performed low-temperature measurements on a gated two-dimensional electron system in which electron-electron (e-e) interactions are insignificant. At low magnetic fields, disorder-driven movement of the crossing of longitudinal and Hall resistivities (ρxx and ρxy) can be observed. Interestingly, by applying different gate voltages, we demonstrate that such a crossing at ρxx ~ ρxy can occur at a magnetic field higher, lower, or equal to the temperature-independent point in ρxx which corresponds to the direct insulator-quantum Hall transition. We explicitly show that ρxx ~ ρxy occurs at the inverse of the classical Drude mobility 1/μD rather than the crossing field corresponding to the insulator-quantum Hall transition. Moreover, we show that the background magnetoresistance can affect the transport properties of our device significantly. Thus, we suggest that great care must be taken when calculating the renormalized mobility caused by e-e interactions.
Collapse
|
40
|
Enhanced light output power of quantum cascade lasers from a tilted front facet. OPTICS EXPRESS 2013; 21:15869-15877. [PMID: 23842373 DOI: 10.1364/oe.21.015869] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
We present a technique for enhancing the light output power of quantum cascade lasers (QCLs) by tilting of the front facet, which leads to a change of the modal reflectivity, resulting in an asymmetric light intensity distribution along the laser cavity. This asymmetry provides most of the light being emitted through one facet of the laser. An experimental study of threshold current, slope efficiency and light output power as a function of the front facet angles were performed and compared to conventional QCLs. The lasers with a front facet angle of 8° shows a 20% improved power output from the front facet.
Collapse
|
41
|
Abstract
A characteristic feature of quantum cascade lasers is their unipolar carrier transport. We exploit this feature and realize nominally symmetric active regions for terahertz quantum cascade lasers, which should yield equal performance with either bias polarity. However, symmetric devices exhibit a strongly bias polarity dependent performance due to growth direction asymmetries, making them an ideal tool to study the related scattering mechanisms. In the case of an InGaAs/GaAsSb heterostructure, the pronounced interface asymmetry leads to a significantly better performance with negative bias polarity and can even lead to unidirectionally working devices, although the nominal band structure is symmetric. The results are a direct experimental proof that interface roughness scattering has a major impact on transport/lasing performance.
Collapse
|
42
|
Tuning the electro-optical properties of germanium nanowires by tensile strain. NANO LETTERS 2012; 12:6230-4. [PMID: 23146072 PMCID: PMC3558012 DOI: 10.1021/nl303288g] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/04/2012] [Revised: 10/25/2012] [Indexed: 05/22/2023]
Abstract
In this Letter we present the electrical and electro-optical characterization of single crystalline germanium nanowires (NWs) under tensile strain conditions. The measurements were performed on vapor-liquid-solid (VLS) grown germanium (Ge) NWs, monolithically integrated into a micromechanical 3-point strain module. Uniaxial stress is applied along the ⟨111⟩ growth direction of individual, 100 nm thick Ge NWs while at the same time performing electrical and optical characterization at room temperature. Compared to bulk germanium, an anomalously high and negative-signed piezoresistive coefficient has been found. Spectrally resolved photocurrent characterization on strained NWs gives experimental evidence on the strain-induced modifications of the band structure. Particularly we are revealing a rapid decrease in resistivity and a red-shift in photocurrent spectra under high strain conditions. For a tensile strain of 1.8%, resistivity decreased by a factor of 30, and the photocurrent spectra shifted by 88 meV. Individual stressed NWs are recognized as an ideal platform for the exploration of strain-related electronic and optical effects and may contribute significantly to the realization of novel optoelectronic devices, strain-enhanced field-effect transistors (FETs), or highly sensitive strain gauges.
Collapse
|
43
|
Insulator, semiclassical oscillations and quantum Hall liquids at low magnetic fields. JOURNAL OF PHYSICS. CONDENSED MATTER : AN INSTITUTE OF PHYSICS JOURNAL 2012; 24:405601. [PMID: 22968955 DOI: 10.1088/0953-8984/24/40/405601] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
Magneto-transport measurements are performed on two-dimensional GaAs electron systems to probe the quantum Hall (QH) effect at low magnetic fields. Oscillations following the Shubnikov-de Haas (SdH) formula are observed in the transition from the insulator to QH liquid when the observed almost temperature-independent Hall slope indicates insignificant interaction correction. Our study shows that the existence of SdH oscillations in such a transition can be understood based on the non-interacting model.
Collapse
|
44
|
Microcavity-integrated graphene photodetector. NANO LETTERS 2012; 12:2773-7. [PMID: 22563791 PMCID: PMC3396125 DOI: 10.1021/nl204512x] [Citation(s) in RCA: 255] [Impact Index Per Article: 21.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/21/2011] [Revised: 04/16/2012] [Indexed: 05/18/2023]
Abstract
There is an increasing interest in using graphene (1, 2) for optoelectronic applications. (3-19) However, because graphene is an inherently weak optical absorber (only ≈2.3% absorption), novel concepts need to be developed to increase the absorption and take full advantage of its unique optical properties. We demonstrate that by monolithically integrating graphene with a Fabry-Pérot microcavity, the optical absorption is 26-fold enhanced, reaching values >60%. We present a graphene-based microcavity photodetector with responsivity of 21 mA/W. Our approach can be applied to a variety of other graphene devices, such as electro-absorption modulators, variable optical attenuators, or light emitters, and provides a new route to graphene photonics with the potential for applications in communications, security, sensing and spectroscopy.
Collapse
|
45
|
Electromagnetic navigation bronchoscopy (ENB): Increasing diagnostic yield. Respir Med 2012; 106:710-5. [PMID: 22391437 DOI: 10.1016/j.rmed.2012.02.002] [Citation(s) in RCA: 79] [Impact Index Per Article: 6.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 12/03/2011] [Revised: 02/03/2012] [Accepted: 02/06/2012] [Indexed: 11/26/2022]
Abstract
OBJECTIVES To determine factors associated with diagnostic yield of ENB. METHODS In 112 consecutive patients referred to our department between March 2010 and December 2010 the diagnostic work-up for solitary pulmonary lesions included a FDG-PET-CT scan, and ENB in combination with ROSE. The final diagnosis was confirmed by histopathological evaluation of specimen obtained either by ENB, or - if ENB was not diagnostic - by CT-guided fine needle aspiration or surgery. RESULTS Thirty-seven (33%) subjects were female, mean age was 66.7 (±1.04) years. The mean diameter of lesions was 27mm (range: 6-46mm). In 83.9% the combination of PET-CT, ENB, and ROSE established a correct diagnosis, as defined by the definite histopathological result. 15.2% (17/112) of lesions were benign, and 84.8% (95/112) were malignant. For 112 procedures we observed a steep learning curve with a diagnostic yield of 80% and 87.5% for the first 30 and last 30 procedures, respectively. The diagnostic yield in lesions ≤20mm and >20mm in diameter was 75.6% and 89.6% (p=0.06), respectively. No significant difference in diagnostic yield was seen depending on lung function, and the localization of the lesions. Two cases (1.8%) of pneumothorax were seen during and up to 24h after bronchoscopy, none of them required a chest tube. CONCLUSION Diagnostic yield increased with experience but was independent from the size of the lesion, the localisation in the lungs, and lung function. The diagnostic yield of ENB can be as high as for CT-guided transthoracic biopsies but carries a significantly lower complication rate.
Collapse
|
46
|
Detectivity enhancement in quantum well infrared photodetectors utilizing a photonic crystal slab resonator. OPTICS EXPRESS 2012; 20:5622-5628. [PMID: 22418369 DOI: 10.1364/oe.20.005622] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
We characterize the performance of a quantum well infrared photodetector (QWIP), which is fabricated as a photonic crystal slab (PCS) resonator. The strongest resonance of the PCS is designed to coincide with the absorption peak frequency at 7.6 µm of the QWIP. To accurately characterize the detector performance, it is illuminated by using single mode mid-infrared lasers. The strong resonant absorption enhancement yields a detectivity increase of up to 20 times. This enhancement is a combined effect of increased responsivity and noise current reduction. With increasing temperature, we observe a red shift of the PCS-QWIP resonance peak of -0.055 cm(-1)/K. We attribute this effect to a refractive index change and present a model based on the revised plane wave method.
Collapse
|
47
|
Quantum Dot Infrared Photodetectors: Photoresponse Enhancement Due to Potential Barriers. NANOSCALE RESEARCH LETTERS 2011; 6:21. [PMID: 27502644 PMCID: PMC3211266 DOI: 10.1007/s11671-010-9767-y] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/19/2010] [Accepted: 08/16/2010] [Indexed: 05/30/2023]
Abstract
Potential barriers around quantum dots (QDs) play a key role in kinetics of photoelectrons. These barriers are always created, when electrons from dopants outside QDs fill the dots. Potential barriers suppress the capture processes of photoelectrons and increase the photoresponse. To directly investigate the effect of potential barriers on photoelectron kinetics, we fabricated several QD structures with different positions of dopants and various levels of doping. The potential barriers as a function of doping and dopant positions have been determined using nextnano(3) software. We experimentally investigated the photoresponse to IR radiation as a function of the radiation frequency and voltage bias. We also measured the dark current in these QD structures. Our investigations show that the photoresponse increases ~30 times as the height of potential barriers changes from 30 to 130 meV.
Collapse
|
48
|
Abstract
We present a detailed investigation of higher order modes in photonic crystal slabs. In such structures the resonances exhibit a blue-shift compared to an ideal two-dimensional photonic crystal, which depends on the order of the slab mode and the polarization. By fabricating a series of photonic crystal slab photo detecting devices, with varying ratios of slab thickness to photonic crystal lattice constant, we are able to distinguish between 0th and 1st order slab modes as well as the polarization from the shift of resonances in the photocurrent spectra. This method complements the photonic band structure mapping technique for characterization of photonic crystal slabs.
Collapse
|
49
|
Terahertz meta-atoms coupled to a quantum well intersubband transition. OPTICS EXPRESS 2011; 19:13700-13706. [PMID: 21747526 DOI: 10.1364/oe.19.013700] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
We present a method of coupling free-space terahertz radiation to intersubband transitions in semiconductor quantum wells using an array of meta-atoms. Owing to the resonant nature of the interaction between metamaterial and incident light and the field enhancement in the vicinity of the metal structure, the coupling efficiency of this method is very high and the energy conversion ratio from in-plane to z field reaches values on the order of 50%. To identify the role of different aspects of this coupling, we have used a custom-made finite-difference time-domain code. The simulation results are supplemented by transmission measurements on modulation-doped GaAs/AlGaAs parabolic quantum wells which demonstrate efficient strong light-matter coupling between meta-atoms and intersubband transitions for normal incident electromagnetic waves.
Collapse
|
50
|
Abstract
Coupling of broadband terahertz pulses into metal-metal terahertz quantum cascade lasers is presented. Mode matched terahertz transients are generated on the quantum cascade laser facet of subwavelength dimension. This method provides a full overlap of optical mode and active laser medium. A longitudinal optical-phonon depletion based active region design is investigated in a coupled cavity configuration. Modulation experiments reveal spectral gain and (broadband) losses. The observed gain shows high dynamic behavior when switching from loss to gain around threshold and is clamped at total laser losses.
Collapse
|