Segmented Flow Processes to Overcome Hurdles of Whole-Cell Biocatalysis in the Presence of Organic Solvents

In modern process development, it is imperative to consider biocatalysis, and whole‐cell catalysts often represent a favored form of such catalysts. However, the application of whole‐cell catalysis in typical organic batch two‐phase synthesis often struggles due to mass transfer limitations, emulsion formation, tedious work‐up and, thus, low yields. Herein, we demonstrate that utilizing segmented flow tools enables the conduction of whole‐cell biocatalysis efficiently in biphasic media. Exemplified for three different biotransformations, the power of such segmented flow processes is shown. For example, a 3‐fold increase of conversion from 34 % to >99 % and a dramatic simplified work‐up leading to a 1.5‐fold higher yield from 44 % to 65 % compared to the analogous batch process was achieved in such a flow process.

From a Biosynthetic Pathway toward a Biocatalytic Process and Chemocatalytic Modifications: Three-Step Enzymatic Cascade to the Plant Metabolite cis-(+)-12-OPDA and Metathesis-Derived Products

A biotechnological approach toward the plant metabolite and regulator cis-(+)-12-oxophytodienoic acid (cis-(+)-12-OPDA) in a one-pot process with >99% conversion, at least 90% selectivity and ≤10% of side products as well as a high diastereoselectivity (leading to d.r. of at least 90:10) is reported. The optimized organic-synthetic enzyme cascade for preparing this bioactive and commercial molecule with pharmaceutical relevance on a gram per L scale is designed based on its biosynthetic pathway starting from cheap and readily accessible linolenic acid. Toward this end, a recombinant biocatalyst system has been prepared for carrying out the most critical two key steps in a tailored manner, thus avoiding sensitive intermediate decomposition. Furthermore, cis-(+)-12-OPDA is successfully modified via a cross-alkene metathesis reaction with conversions of up to >99%, leading to a compound library of new cis-(+)-12-OPDA derivatives with different substitution pattern of the side chain at the 2-position. By means of such a combined biotechnological and chemocatalytic route, a straightforward approach to a structurally unique oxylipin library is realized, which would be highly difficult or not accessible by pure chemical and biotechnological methods, respectively.

Providing reducing power by microalgal photosynthesis: a novel perspective towards sustainable biocatalytic production of bulk chemicals exemplified for aliphatic amines

A biotechnological process is reported, which enables an enzymatic reduction without the need for addition of an organic co-substrate for in situ-cofactor recycling. The process is based on merging the fields of enzymatic reductive amination with formate dehydrogenase-based in situ-cofactor recycling and algae biotechnology by means of the photoautotrophic microorganism Chlamydomonas reinhardtii, providing the needed formate in situ by formation from carbon dioxide, water and light. This biotransformation has been exemplified for the synthesis of various aliphatic amines known as bulk chemicals.

Enantioselective synthesis of amines via reductive amination with a dehydrogenase mutant from Exigobacterium sibiricum: Substrate scope, co-solvent tolerance and biocatalyst immobilization

In recent years, the reductive amination of ketones in the presence of amine dehydrogenases emerged as an attractive synthetic strategy for the enantioselective preparation of amines starting from ketones, an ammonia source, a reducing reagent and a cofactor, which is recycled in situ by means of a second enzyme. Current challenges in this field consists of providing a broad synthetic platform as well as process development including enzyme immobilization. In this contribution these issues are addressed. Utilizing the amine dehydrogenase EsLeuDH-DM as a mutant of the leucine dehydrogenase from Exigobacterium sibiricum, a range of aryl-substituted ketones were tested as substrates revealing a broad substrate tolerance. Kinetics as well as inhibition effects were also studied and the suitability of this method for synthetic purpose was demonstrated with acetophenone as a model substrate. Even at an elevated substrate concentration of 50 mM, excellent conversion was achieved. In addition, the impact of water-miscible co-solvents was examined, and good activities were found when using DMSO of up to 30% (v/v). Furthermore, a successful immobilization of the EsLeuDH-DM was demonstrated utilizing a hydrophobic support and a support for covalent binding, respectively, as a carrier.

One-pot synthesis of bioactive cyclopentenones from α-linolenic acid and docosahexaenoic acid

Oxidation products of the poly-unsaturated fatty acids (PUFAs) arachidonic acid, α-linolenic acid and docosahexaenoic acid are bioactive in plants and animals as shown for the cyclopentenones prostaglandin 15d-PGJ₂ and PGA₂, cis-(+)-12-oxophytodienoic acid (12-OPDA), and 14-A-4 neuroprostane. In this study an inexpensive and simple enzymatic multi-step one-pot synthesis is presented for 12-OPDA, which is derived from α-linolenic acid, and the analogous docosahexaenoic acid (DHA)-derived cyclopentenone [(4Z,7Z,10Z)-12-[[-(1S,5S)-4-oxo-5-(2Z)-pent-2-en-1yl]-cyclopent-2-en-1yl] dodeca-4,7,10-trienoic acid, OCPD]. The three enzymes utilized in this multi-step cascade were crude soybean lipoxygenase or a recombinant lipoxygenase, allene oxide synthase and allene oxide cyclase from Arabidopsis thaliana. The DHA-derived 12-OPDA analog OCPD is predicted to have medicinal potential and signaling properties in planta. With OCPD in hand, it is shown that this compound interacts with chloroplast cyclophilin 20-3 and can be metabolized by 12-oxophytodienoic acid reductase (OPR3) which is an enzyme relevant for substrate bioactivity modulation in planta.

Neuronally produced versican V2 renders C-fiber nociceptors IB4 -positive

A subpopulation of nociceptors, the glial cell line-derived neurotrophic factor (GDNF)-dependent, non-peptidergic C-fibers, expresses a cell-surface glycoconjugate that can be selectively labeled with isolectin B4 (IB4 ), a homotetrameric plant lectin from Griffonia simplicifolia. We show that versican is an IB4 -binding molecule in rat dorsal root ganglion neurons. Using reverse transcriptase polymerase chain reaction (RT-PCR), in situ hybridization and immunofluorescence experiments on rat lumbar dorsal root ganglion, we provide the first demonstration that versican is produced by neurons. In addition, by probing Western blots with splice variant-specific antibodies we show that the IB4 -binding versican contains only the glycosaminoglycan alpha domain. Our data support V2 as the versican isoform that renders this subpopulation of nociceptors IB4 -positive (+). A subset of nociceptors, the GDNF-dependent non-peptidergic C-fibers can be characterized by its reactivity for isolectin B4 (IB4), a plant lectin from Griffonia simplicifolia. We have previously demonstrated that versican V2 binds IB4 in a Ca2 + -dependent manner. However, given that versican is thought to be the product of glial cells, it was questionable whether versican V2 can be accountable for the IB4-reactivity of this subset of nociceptors. The results presented here prove - for the first time - a neuronal origin of versican and suggest that versican V2 is the molecule that renders GDNF-dependent non-peptidergic C-fibers IB4-positive.

A bipolar spindle of antiparallel ParM filaments drives bacterial plasmid segregation

To ensure their stable inheritance by daughter cells during cell division, bacterial low-copy-number plasmids make simple DNA segregating machines that use an elongating protein filament between sister plasmids. In the ParMRC system of the Escherichia coli R1 plasmid, ParM, an actinlike protein, forms the spindle between ParRC complexes on sister plasmids. By using a combination of structural work and total internal reflection fluorescence microscopy, we show that ParRC bound and could accelerate growth at only one end of polar ParM filaments, mechanistically resembling eukaryotic formins. The architecture of ParM filaments enabled two ParRC-bound filaments to associate in an antiparallel orientation, forming a bipolar spindle. The spindle elongated as a bundle of at least two antiparallel filaments, thereby pushing two plasmid clusters toward the poles.

Femoral nerve block with ropivacaine or bupivacaine in day case anterior crucial ligament reconstruction

BACKGROUND/OBJECTIVE

Our aim was to evaluate analgesia, motor block and pharmacokinetics of ropivacaine 0.2% and 0.75% in a femoral nerve block (FNB) in day case patients for anterior crucial ligament (ACL)-reconstruction compared with bupivacaine 0.25% and placebo.

METHODS

Following ethics committee approval and informed consent, 280 patients were randomly allocated to four groups for single-shot FNB [30 ml ropivacaine 0.2% (group RO2.0), 0.75% (RO7.5), bupivacaine 0.25% (BU2.5) and NaCl 0.9% (NaCl)]. Analgesia (pain scores, primary outcome) and motor block were assessed at 4 h (dismissal) and up to 24 h. Plasma concentration was determined up to 240 min thereafter.

RESULTS

Pain scores at 4 h were significantly higher for NaCl 4 (0-8) (median, range) (vs.) BU2.5 2 (0-8), RO2.0 3 (0-9) and RO7.5 2 (0-8) (NS within the LA groups). Patients of the NaCl group needed analgesics significantly more often (93%) within 4 h after surgery vs. 16% of group RO2.0, 19% of group RO7.5 and 19% of group BU2.5. Motor block was significantly increased with all local anesthetics without a significant difference within the LA groups 3 (0-5) in RO2.0, 3 (0-5) in RO7.5 and 3 (0-4) in BU2.5 vs. 0 (0-3) in group NaCl (median (range); scale from 0=full strength to 5=complete paralysis). Peak plasma concentrations differed significantly: RO7.5: 1.4 +/- 0.4 (0.73-2.6) [microg/ml, mean +/- SD (range)] after 33 +/- 14 (10-40) min, RO2.0: 0.6 +/- 0.3 (0.13-1.0) after 22+17 (10-60) and BU2.5: 0.3 +/- 0.16 (0.05-0.62) at 31 +/- 17 (10-60), respectively.

CONCLUSION

FNB for ACL reconstruction with ropivacaine or bupivacaine provided better post-operative analgesia than placebo without reaching toxic plasma concentrations. Significant motor block was observed after 4 h in all groups including the lowest concentration of ropivacaine but occurred even with placebo.

High-resolution crystal structure and in vivo function of a kinesin-2 homologue in Giardia intestinalis

A critical component of flagellar assembly, the kinesin-2 heterotrimeric complex powers the anterograde movement of proteinaceous rafts along the outer doublet of axonemes in intraflagellar transport (IFT). We present the first high-resolution structures of a kinesin-2 motor domain and an ATP hydrolysis-deficient motor domain mutant from the parasitic protist Giardia intestinalis. The high-resolution crystal structures of G. intestinalis wild-type kinesin-2 (GiKIN2a) motor domain, with its docked neck linker and the hydrolysis-deficient mutant GiKIN2aT104N were solved in a complex with ADP and Mg(2+) at 1.6 and 1.8 A resolutions, respectively. These high-resolution structures provide unique insight into the nucleotide coordination within the active site. G. intestinalis has eight flagella, and we demonstrate that both kinesin-2 homologues and IFT proteins localize to both cytoplasmic and membrane-bound regions of axonemes, with foci at cell body exit points and the distal flagellar tips. We demonstrate that the T104N mutation causes GiKIN2a to act as a rigor mutant in vitro. Overexpression of GiKIN2aT104N results in significant inhibition of flagellar assembly in the caudal, ventral, and posterolateral flagellar pairs. Thus we confirm the conserved evolutionary structure and functional role of kinesin-2 as the anterograde IFT motor in G. intestinalis.

3D electron microscopy of the interaction of kinesin with tubulin

We have studied the structure of microtubules decorated with kinesin motor domains in different nucleotide states by 3D electron microscopy. Having docked the atomic coordinates of both dimeric ADP.kinesin and tubulin heterodimer into a map of kinesin dimers bound to microtubules in the presence of ADP, we try to predict which regions of the proteins interact in the weakly binding state. When either the presence of 5'-adenylyimidodiphosphate (AMP-PNP) or an absence of nucleotides puts motor domains into a strongly-bound state, the 3D maps show changes in the motor domains which modify their interaction with beta-tubulin. The maps also show differences in beta-tubulin conformation compared with undecorated microtubules or those decorated with weakly-bound motors. Strongly-bound ncd appears to produce an identical change.

Distribution of the Escherichia coli structural maintenance of chromosomes (SMC)-like protein MukB in the cell

Fluorescent polyclonal antibodies specific for MukB have been used to study its localization in Escherichia coli. In wild-type cells, the MukB protein appeared as a limited number of oblong shapes embracing the nucleoid. MukB remained associated with the nucleoid in the absence of DNA replication. The centre of gravity of the dispersed MukB signal initially localized near mid-cell, but moved to approximately quarter positions well before the termination of DNA replication and its subsequent reinitiation. Because MukB had been reported to bind to FtsZ and to its eukaryotic homologue tubulin in vitro, cells were co-labelled with MukB- and FtsZ-specific fluorophores. No co-localization of MukB with polymerized FtsZ (the FtsZ ring) was observed at any time during the cell cycle. A possible role for MukB in preventing premature FtsZ polymerization and in DNA folding that might assist DNA segregation is discussed.

Bacterial ancestry of actin and tubulin

The structural and functional resemblance between the bacterial cell-division protein FtsZ and eukaryotic tubulin was the first indication that the eukaryotic cytoskeleton may have a prokaryotic origin. The bacterial ancestry is made even more obvious by the findings that the bacterial cell-shape-determining proteins Mreb and Mbl form large spirals inside non-spherical cells, and that MreB polymerises in vitro into protofilaments very similar to actin. Recent advances in research on two proteins involved in prokaryotic cytokinesis and cell shape determination that have similar properties to the key components of the eukaryotic cytoskeleton are discussed.

Refined structure of alpha beta-tubulin at 3.5 A resolution

We present a refined model of the alpha beta-tubulin dimer to 3.5 A resolution. An improved experimental density for the zinc-induced tubulin sheets was obtained by adding 114 electron diffraction patterns at 40-60 degrees tilt and increasing the completeness of structure factor amplitudes to 84.7 %. The refined structure was obtained using maximum-likelihood including phase information from experimental images, and simulated annealing Cartesian refinement to an R-factor of 23.2 and free R-factor of 29.7. The current model includes residues alpha:2-34, alpha:61-439, beta:2-437, one molecule of GTP, one of GDP, and one of taxol, as well as one magnesium ion at the non-exchangeable nucleotide site, and one putative zinc ion near the M-loop in the alpha-tubulin subunit. The acidic C-terminal tails could not be traced accurately, neither could the N-terminal loop including residues 35-60 in the alpha-subunit. There are no major changes in the overall fold of tubulin with respect to the previous structure, testifying to the quality of the initial experimental phases. The overall geometry of the model is, however, greatly improved, and the position of side-chains, especially those of exposed polar/charged groups, is much better defined. Three short protein sequence frame shifts were detected with respect to the non-refined structure. In light of the new model we discuss details of the tubulin structure such as nucleotide and taxol binding sites, lateral contacts in zinc-sheets, and the significance of the location of highly conserved residues.

Prokaryotic origin of the actin cytoskeleton

It was thought until recently that bacteria lack the actin or tubulin filament networks that organize eukaryotic cytoplasm. However, we show here that the bacterial MreB protein assembles into filaments with a subunit repeat similar to that of F-actin-the physiological polymer of eukaryotic actin. By elucidating the MreB crystal structure we demonstrate that MreB and actin are very similar in three dimensions. Moreover, the crystals contain protofilaments, allowing visualization of actin-like strands at atomic resolution. The structure of the MreB protofilament is in remarkably good agreement with the model for F-actin, showing that the proteins assemble in identical orientations. The actin-like properties of MreB explain the finding that MreB forms large fibrous spirals under the cell membrane of rod-shaped cells, where they are involved in cell-shape determination. Thus, prokaryotes are now known to possess homologues both of tubulin, namely FtsZ, and of actin.

Crystal structure of the bacterial cell division regulator MinD

In bacterial cell division MinD plays a pivotal role, selecting the mid-cell over other sites. With MinC, MinD forms a non-specific inhibitor of division, that interacts with FtsZ. Specificity is provided by MinD's interaction with MinE at the mid-cell. We have solved the crystal structure of MinD-1 from Archaeoglobus fulgidus to 2.6 A by multiple anomalous dispersion. MinD is a classic nucleotide binding protein, related to nitrogenase iron proteins, which have a fold of a seven-stranded parallel beta-sheet, surrounded by alpha-helices. Although MinD, unlike the proteins it interacts with and those it is structurally related to, is a monomer, not a dimer.

Crystal structure of the SMC head domain: an ABC ATPase with 900 residues antiparallel coiled-coil inserted

SMC (structural maintenance of chromosomes) proteins are large coiled-coil proteins involved in chromosome condensation, sister chromatid cohesion, and DNA double-strand break processing. They share a conserved five-domain architecture with three globular domains separated by two long coiled-coil segments. The coiled-coil segments are antiparallel, bringing the N and C-terminal globular domains together. We have expressed a fusion protein of the N and C-terminal globular domains of Thermotoga maritima SMC in Escherichia coli by replacing the approximately 900 residue coiled-coil and hinge segment with a short peptide linker. The SMC head domain (SMChd) binds and condenses DNA in an ATP-dependent manner. Using selenomethionine-substituted protein and multiple anomalous dispersion phasing, we have solved the crystal structure of the SMChd to 3.1 A resolution. In the monoclinic crystal form, six SMChd molecules form two turns of a helix. The fold of SMChd is closely related to the ATP-binding cassette (ABC) ATPase family of proteins and Rad50, a member of the SMC family involved in DNA double-strand break repair. In SMChd, the ABC ATPase fold is formed by the N and C-terminal domains with the 900 residue coiled-coil and hinge segment inserted in the middle of the fold. The crystal structure of an SMChd confirms that the coiled-coil segments in SMC proteins are anti-parallel and shows how the N and C-terminal domains come together to form an ABC ATPase. Comparison to the structure of the MukB N-terminal domain demonstrates the close relationship between MukB and SMC proteins, and indicates a helix to strand conversion when N and C-terminal parts come together.

Conserved sequence motif at the C-terminus of the bacterial cell-division protein FtsA

FtsA is an essential part of the septal ring structure in bacterial cell division. Two peptide-protein interactions are known in this process: FtsA and ZipA bind the C-terminus of FtsZ, the bacterial tubulin homologue, which is the first septal component to appear at the septum. Our recent crystal structure of FtsA revealed a possible peptide binding site on FtsA and a long disordered C-terminal region. Here we show that all FtsA proteins contain a conserved 10-13 residue motif at the C-terminal end that may facilitate targeting of downstream septal components.

Crystal structure of the cell division protein FtsA from Thermotoga maritima

Bacterial cell division requires formation of a septal ring. A key step in septum formation is polymerization of FtsZ. FtsA directly interacts with FtsZ and probably targets other proteins to the septum. We have solved the crystal structure of FtsA from Thermotoga maritima in the apo and ATP-bound form. FtsA consists of two domains with the nucleotide-binding site in the interdomain cleft. Both domains have a common core that is also found in the actin family of proteins. Structurally, FtsA is most homologous to actin and heat-shock cognate protein (Hsc70). An important difference between FtsA and the actin family of proteins is the insertion of a subdomain in FtsA. Movement of this subdomain partially encloses a groove, which could bind the C-terminus of FtsZ. FtsZ is the bacterial homologue of tubulin, and the FtsZ ring is functionally similar to the contractile ring in dividing eukaryotic cells. Elucidation of the crystal structure of FtsA shows that another bacterial protein involved in cytokinesis is structurally related to a eukaryotic cytoskeletal protein involved in cytokinesis.

Helical tubes of FtsZ from Methanococcus jannaschii

Bacterial cell division depends on the formation of a cytokinetic ring structure, the Z-ring. The bacterial tubulin homologue FtsZ is required for Z-ring formation. FtsZ assembles into various polymeric forms in vitro, indicating a structural role in the septum of bacteria. We have used recombinant FtsZ1 protein from M. jannaschii to produce helical tubes and sheets with high yield using the GTP analogue GMPCPP [guanylyl-(alpha,beta)-methylene-diphosphate]. The sheets appear identical to the previously reported Ca++-induced sheets of FtsZ from M. jannaschii that were shown to consist of 'thick'-filaments in which two protofilaments run in parallel. Tubes assembled either in Ca++ or in GMPCPP contain filaments whose dimensions indicate that they could be equivalent to the 'thick'-filaments in sheets. Some tubes are hollow but others are filled by additional protein density. Helical FtsZ tubes differ from eukaryotic microtubules in that the filaments curve around the filament axis with a pitch of approximately 430 A for Ca++-induced tubes or 590 - 620 A for GMPCPP. However, their assembly in vitro as well-ordered polymers over distances comparable to the inner circumference of a bacterium may indicate a role in vivo. Their size and stability make them suitable for use in motility assays.

Crystal structure of the N-terminal domain of MukB: a protein involved in chromosome partitioning

BACKGROUND

The 170 kDa protein MukB has been implicated in ATP-dependent chromosome partitioning during cell division in Escherichia coli. MukB shares its dimeric structure and domain architecture with the ubiquitous family of SMC (structural maintenance of chromosomes) proteins that facilitate similar functions. The N-terminal domain of MukB carries a putative Walker A nucleotide-binding region and the C-terminal domain has been shown to bind to DNA. Mutant phenotypes and a domain arrangement similar to motor proteins that move on microtubules led to the suggestion that MukB might be a motor protein acting on DNA.

RESULTS

We have cloned, overexpressed and crystallized a 26 kDa protein consisting of 227 N-terminal residues of MukB from E. coli. The structure has been solved using multiple anomalous dispersion and has been refined to 2.2 A resolution. The N-terminal domain of MukB has a mixed alpha/beta fold with a central six-stranded antiparallel beta sheet. The putative nucleotide-binding loop, which is part of an unexpected helix-loop-helix motif, is exposed on the surface and no nucleotide-binding pocket could be detected.

CONCLUSIONS

The N-terminal domain of MukB has no similarity to the kinesin family of motor proteins or to any other nucleotide-binding protein. Together with the finding of the exposed Walker A motif this observation supports a model in which the N- and C-terminal domains come together in the dimer of MukB to form the active site. Conserved residues on one side of the molecule delineate a region of the N-terminal domain that is likely to interact with the C-terminal domain.

Congruent docking of dimeric kinesin and ncd into three-dimensional electron cryomicroscopy maps of microtubule-motor ADP complexes

We present a new map showing dimeric kinesin bound to microtubules in the presence of ADP that was obtained by electron cryomicroscopy and image reconstruction. The directly bound monomer (first head) shows a different conformation from one in the more tightly bound empty state. This change in the first head is amplified as a movement of the second (tethered) head, which tilts upward. The atomic coordinates of kinesin.ADP dock into our map so that the tethered head associates with the bound head as in the kinesin dimer structure seen by x-ray crystallography. The new docking orientation avoids problems associated with previous predictions; it puts residues implicated by proteolysis-protection and mutagenesis studies near the microtubule but does not lead to steric interference between the coiled-coil tail and the microtubule surface. The observed conformational changes in the tightly bound states would probably bring some important residues closer to tubulin. As expected from the homology with kinesin, the atomic coordinates of nonclaret disjunctional protein (ncd).ADP dock in the same orientation into the attached head in a map of microtubules decorated with dimeric ncd.ADP. Our results support the idea that the observed direct interaction between the two heads is important at some stages of the mechanism by which kinesin moves processively along microtubules.

Tubulin-like protofilaments in Ca2+-induced FtsZ sheets

The 40 kDa protein FtsZ is a major septum-forming component of bacterial cell division. Early during cytokinesis at midcell, FtsZ forms a cytokinetic ring that constricts as septation progresses. FtsZ has a high propensity to polymerize in vitro into various structures, including sheets and filaments, in a GTP-dependent manner. Together with limited sequence homology, the occurrence of the tubulin signature motif in FtsZ and a similar three-dimensional structure, this leads to the conclusion that FtsZ is the bacterial tubulin homologue. We have polymerized FtsZ1 from Methanococcus jannaschii in the presence of millimolar concentrations of Ca2+ ions to produce two-dimensional crystals of plane group P2221. Most of the protein precipitates and forms filaments approximately 23.0 nm in diameter. A three-dimensional reconstruction of tilted micrographs of FtsZ sheets in negative stain between 0 and 60 degrees shows protofilaments of FtsZ running along the sheet axis. Pairs of parallel FtsZ protofilaments associate in an antiparallel fashion to form a two-dimensional sheet. The antiparallel arrangement is believed to generate flat sheets instead of the curved filaments seen in other FtsZ polymers. Together with the subunit spacing along the protofilament axis, a fitting of the FtsZ crystal structure into the reconstruction suggests a protofilamant structure very similar to that of tubulin protofilaments.

How Taxol stabilises microtubule structure

The structure of tubulin shows paclitaxel (Taxol(R)) binding to a pocket in beta tubulin on the microtubule's inner surface, which counteracts the effects of GTP hydrolysis occurring on the other side of the monomer.

Crystal structure determination of FtsZ from Methanococcus jannaschii

FtsZ is the polymer-forming protein of bacterial cell division. It is part of a ring in the middle of the dividing cell that is required for constriction of cell membrane and cell envelope to yield two daughter cells. FtsZ is a GTPase and is the only bacterial protein showing significant sequence homology to the eukaryotic tubulins. FtsZ can polymerize into tubes, sheets, and rings in vitro and is ubiquitous in eubacteria and archaea. Full-length FtsZ1 from Methanococcus jannaschii has been over expressed in Escherichia coli, employing the hyperthermophilic properties of the protein. Crystals grown from PEG400 and ethanol belong to spacegroup I213 with a = b = c = 159.1 A. Isomorphous replacement using one Hg derivative yielded a interpretable electron density map at 4 A resolution. The structure for residues 23-356 and one GDP has been refined to an Rfree of 0.28 (Rf = 0.20) at 2.8 A resolution. FtsZ consists of two domains with a connecting core helix. The N-terminal domain and the core helix contain all residues involved in nucleotide binding and resemble the fold of dinucleotide-binding proteins. The structures of tubulin and FtsZ show striking similarity; together with the functional similarities, this provides a strong indication that FtsZ is a true homolog of tubulin.

Tubulin and FtsZ form a distinct family of GTPases

Tubulin and FtsZ share a common fold of two domains connected by a central helix. Structure-based sequence alignment shows that common residues localize in the nucleotide-binding site and a region that interacts with the nucleotide of the next tubulin subunit in the protofilament, suggesting that tubulin and FtsZ use similar contacts to form filaments. Surfaces that would make lateral interactions between protofilaments or interact with motor proteins are, however, different. The highly conserved nucleotide-binding sites of tubulin and FtsZ clearly differ from those of EF-Tu and other GTPases, while resembling the nucleotide site of glyceraldehyde-3-phosphate dehydrogenase. Thus, tubulin and FtsZ form a distinct family of GTP-hydrolyzing proteins.

Crystal structure of the thermosome, the archaeal chaperonin and homolog of CCT

We have determined to 2.6 A resolution the crystal structure of the thermosome, the archaeal group II chaperonin from T. acidophilum. The hexadecameric homolog of the eukaryotic chaperonin CCT/TRiC shows an (alphabeta)4(alphabeta)4 subunit assembly. Domain folds are homologous to GroEL but form a novel type of inter-ring contact. The domain arrangement resembles the GroEL-GroES cis-ring. Parts of the apical domains form a lid creating a closed conformation. The lid substitutes for a GroES-like cochaperonin that is absent in the CCT/TRiC system. The central cavity has a polar surface implicated in protein folding. Binding of the transition state analog Mg-ADP-AIF3 suggests that the closed conformation corresponds to the ATP form.

Crystal structure of the bacterial cell-division protein FtsZ

Bacterial cell division ends with septation, the constriction of the cell wall and cell membranes that leads to the formation of two daughter cells. During septation, FtsZ, a protein of relative molecular mass 40,000 which is ubiquitous in eubacteria and is also found in archaea and chloroplasts, localizes early at the division site to form a ring-shaped septum. This septum is required for the mechanochemical process of membrane constriction. FtsZ is a GTPase with weak sequence homology to tubulins. The nature of FtsZ polymers in vivo is unknown, but FtsZ can form tubules, sheets and minirings in vitro. Here we report the crystal structure at 2.8 A resolution of recombinant FtsZ from the hyperthermophilic methanogen Methanococcus jannaschii. FtsZ has two domains, one of which is a GTPase domain with a fold related to one found in the proteins p21ras and elongation factor EF-Tu. The carboxy-terminal domain, whose function is unknown, is a four-stranded beta-sheet tilted by 90 degrees against the beta-sheet of the GTPase domain. The two domains are arranged around a central helix. GDP binding is different from that typically found in GTPases and involves four phosphate-binding loops and a sugar-binding loop in the first domain, with guanine being recognized by residues in the central connecting helix. The three-dimensional structure of FtsZ is similar to the structure of alpha- and beta-tubulin.

Ta6Br(2+)12, a tool for phase determination of large biological assemblies by X-ray crystallography

The title compound Ta6Br(2+)12 is of interest for the analysis of biological structures as a heavy-metal derivative with great potential for the structure determination of large protein systems. In macromolecular crystallography the phases of the measured structure factor amplitudes have to be determined. The most widely used method for novel structures is isomorphous replacement by introducing electron-rich compounds into the protein crystals. These compounds produce measurable changes of the diffraction intensities, which allow phase determination. We synthetized the Ta6Br(2+)12 cluster in high yields, crystallized it, and determined its crystal structure by X-ray diffraction analysis at atomic resolution. The cluster is a regular octahedron consisting of six metal atoms with 12 bridging bromine atoms along the 12 edges of the octahedron. The cluster is compact, of approximately spherical shape with about 4.3 A radius and highly symmetrical. One Ta6Br(2+)12 ion adds 856 electrons to a protein, a considerable contribution to the scattering power even of large proteins or multimeric systems. At low resolution all atoms of the cluster scatter in phase and act as a super heavy-atom, which is easy to locate in the difference Patterson map. We investigated its binding sites in the biologically significant high-resolution structures of an antibody V(L) domain, dimethyl sulfoxide reductase, GTP-cyclohydrolase I, and the proteasome. With the randomly oriented cluster, treated as a single site scatterer, phases could be used only up to 6 A resolution. In contrast, when the cluster is correctly oriented, phases calculated from its 18 atom sites can be used to high resolution. We present the atomic structure of the Ta6Br(2+)12, describe a method to determine its localization and orientation in the unit cell of protein crystals of two different proteins, and analyse its phasing power. We show that phases can be calculated to high resolution. The phase error is lower by more than 30 degrees compared to the single site approximation, using a resolution of 2.2 A. Furthermore, Ta6Br(2+)12 has two different strong anomalous scatterers tantalum and bromine to be used for phase determination.

Structure of 20S proteasome from yeast at 2.4 A resolution

The crystal structure of the 20S proteasome from the yeast Saccharomyces cerevisiae shows that its 28 protein subunits are arranged as an (alpha1...alpha7, beta1...beta7)2 complex in four stacked rings and occupy unique locations. The interior of the particle, which harbours the active sites, is only accessible by some very narrow side entrances. The beta-type subunits are synthesized as proproteins before being proteolytically processed for assembly into the particle. The proforms of three of the seven different beta-type subunits, beta1/PRE3, beta2/PUP1 and beta5/PRE2, are cleaved between the threonine at position 1 and the last glycine of the pro-sequence, with release of the active-site residue Thr 1. These three beta-type subunits have inhibitor-binding sites, indicating that PRE2 has a chymotrypsin-like and a trypsin-like activity and that PRE3 has peptidylglutamyl peptide hydrolytic specificity. Other beta-type subunits are processed to an intermediate form, indicating that an additional nonspecific endopeptidase activity may exist which is important for peptide hydrolysis and for the generation of ligands for class I molecules of the major histocompatibility complex.

Structural investigation of proteasome inhibition

The novel proteolytic mechanism of the 20S proteasome from T. acidophilum has been investigated by X-ray crystallography using small-molecule inhibitors and substrate analogues. The 20S proteasome degrades unfolded substrates into small peptides of a defined length. Calpain inhibitor II, chymostatin and lactacystin all bind in the previously identified active site pocket near Thr1 of all fourteen beta-subunits. The chromogenic substrate analogue Suc-LLVY-AMC binds in the same pocket of the proteolytically inactive T1A mutant of the beta-subunit, but with a significantly altered geometry. The heavy-atom cluster Ta6Br12(2+) used in X-ray structure determination occupies seven sites in the inner compartment of the proteasome and exhibits inhibition of the chymotrypsin-like activity. Other effectors of proteasome activity showed no significant difference in electron density.

Analysis of mammalian 20S proteasome biogenesis: the maturation of beta-subunits is an ordered two-step mechanism involving autocatalysis

Maturation of eukaryotic 20S proteasomes involves the processing of beta-subunits by limited proteolysis. To study the processing mechanism we analysed different point mutations of the beta-subunit LMP2 in transfected human T2 cells. Here we show that the presence of the intact Gly-1Thr1 consensus motif and Lys33 are essential for correct processing. Mutation of Thr1, the active site residue in mature subunits, or of Lys33, results in complete inhibition of processing at the consensus site. In addition, proprotein processing in vitro of wild-type LMP2, incorporated in immature 16S precursor complexes, can be blocked by a proteasome-specific inhibitor. While the processing of inhibitor-treated wild-type proprotein was completely prevented, the site-directed mutagenesis of LMP2 results in processing intermediates carrying an extension of 8-10 residues preceding Thr1, suggesting an additional cleavage event within the prosequence. Furthermore, exchange of mammalian prosequences interferes with processing efficiency and suggests subunit specificity. Based on our data we propose a model for self-activation of proteasomal beta-subunits in which residue Thr1 serves as nucleophile and Lys33 as proton donor/acceptor. We provide evidence that subunit processing of mammalian beta-subunits proceeds via a novel ordered two-step mechanism involving autocatalysis.

Crystal structure of dimethyl sulfoxide reductase from Rhodobacter capsulatus at 1.88 A resolution

The periplasmic dimethyl sulfoxide reductase (DMSOR) from the photosynthetic purple bacterium Rhodobacter capsulatus functions as the terminal electron acceptor in its respiratory chain. The enzyme catalyzes the reduction of highly oxidized substrates like dimethyl sulfoxide to dimethyl sulfide. At a molybdenum redox center, two single electrons are transferred from cytochrome C556 to the substrate dimethyl sulfoxide, generating dimethyl sulfide and (with two protons) water. The enzyme was purified and crystallized in space group P4(1)2(1)2 with unit cell dimensions of a = b = 80.7 A and c = 229.2 A. The crystals diffract beyond 1.8 A with synchrotron radiation. The three-dimensional structure was solved by a combination of multiple isomorphous replacement and molecular replacement techniques. The atomic model was refined to an R-factor of 0.169 for 57,394 independent reflections. The spherical protein consists of four domains with a funnel-like cavity that leads to the freely accessible metal-ion redox center. The bis(molybdopterin guanine dinucleotide) molybdenum cofactor (1541 Da) of the single chain protein (85,033 Da) has the molybdenum ion bound to the cis-dithiolene group of only one molybdopterin guanine dinucleotide molecule. Three additional ligands, two oxo groups and the oxygen of a serine side-chain, are bound to the molybdenum ion. The second molybdopterin system is not part of the ligand sphere of the metal center with its sulfur atoms at distances of 3.5 A and 3.8 A away. It might be involved in electron shuttling from the protein surface to the molybdenum center.

Proteasome: from structure to function

During the past two years, significant progress has been made in understanding the structure and function of the proteasome. Recent work has revealed the three-dimensional structure of the 700 kDa proteolytic complex at atomic resolution and elucidated its novel catalytic mechanism. Close relationships to a number of other amino-terminal hydrolases have emerged, making the proteasomal subunits the prototype of this newly discovered structural superfamily.

Locating a local symmetry axis from patterson map cross vectors: application to crystal data from GroEl, GTP cyclohydrolase I and the proteosome

The cross vectors of the native Patterson map are shown to exhibit non-crystallographic symmetry in the case of local axes parallel to one another. This information can be used to determine the translation component of such axes. A program is described to search for this cross vector, and is tested on low-resolution data from crystals of the tetradecameric GroEL molecule, the decameric GTP cyclohydrolase I and the tetradecameric proteosome. For GroEL, the function produces a packing arrangement optimal for sevenfold symmetry, and is in agreement with the dimensions of the molecule as given by electron microscopy data and the recently determined crystal structure. Positioning of local axes is confirmed by two high-resolution crystal structure analyses: the fivefold axis in cyclohydrolase I and the sevenfold axis in the proteosome. Implications for the location of heavy-atom positions are discussed for these two cases.

Crystal structure of the 20S proteasome from the archaeon T. acidophilum at 3.4 A resolution

The three-dimensional structure of the proteasome from the archaebacterium Thermoplasma acidophilum has been elucidated by x-ray crystallographic analysis by means of isomorphous replacement and cyclic averaging. The atomic model was built and refined to a crystallographic R factor of 22.1 percent. The 673-kilodalton protease complex consists of 14 copies of two different subunits, alpha and beta, forming a barrel-shaped structure of four stacked rings. The two inner rings consist of seven beta subunits each, and the two outer rings consist of seven alpha subunits each. A narrow channel controls access to the three inner compartments. The alpha 7 beta 7 beta 7 alpha 7 subunit assembly has 72-point group symmetry. The structures of the alpha and beta subunits are similar, consisting of a core of two antiparallel beta sheets that is flanked by alpha helices on both sides. The binding of a peptide aldehyde inhibitor marks the active site in the central cavity at the amino termini of the beta subunits and suggests a novel proteolytic mechanism.

Proteasome from Thermoplasma acidophilum: a threonine protease

The catalytic mechanism of the 20S proteasome from the archaebacterium Thermoplasma acidophilum has been analyzed by site-directed mutagenesis of the beta subunit and by inhibitor studies. Deletion of the amino-terminal threonine or its mutation to alanine led to inactivation of the enzyme. Mutation of the residue to serine led to a fully active enzyme, which was over ten times more sensitive to the serine protease inhibitor 3,4-dichloroisocoumarin. In combination with the crystal structure of a proteasome-inhibitor complex, the data show that the nucleophilic attack is mediated by the amino-terminal threonine of processed beta subunits. The conservation pattern of this residue in eukaryotic sequences suggests that at least three of the seven eukaryotic beta-type subunit branches should be proteolytically inactive.

Preliminary X-ray crystallographic study of the proteasome from Thermoplasma acidophilum

Single cystals of proteasomes from the archaebacterium Thermoplasma acidophilum were obtained using the hanging-drop vapor diffusion method. The crystals diffract to better than 3.0 A and belong to the orthorhombic space group P2(1)2(1)2(1) with unit cell dimensions a = 308.9 A, b = 208.8 A and c = 116.9 A. There is one molecular complex in the asymmetric unit. Two potentially useful heavy-atom derivatives have been obtained. The self-rotation function of the native Patterson map shows local sevenfold symmetry, consistent with the low-resolution structure obtained by electron microscopic techniques. The unit cell dimensions and crystal symmetry together with the shape and size of the proteasome suggest a packing arrangement of proteasome molecules in the unit cell, with their cylinder axis nearly parallel to the crystallographic a-axis.