Broadband Full-Spectrum Raman Excitation Mapping Reveals Intricate Optoelectronic-Vibrational Resonance Structure of Chirality-Pure Single-Walled Carbon Nanotubes

The Raman excitation spectra of chirality-pure (6,5), (7,5), and (8,3) single-walled carbon nanotubes (SWCNTs) are explored for homogeneous solid film samples over broad excitation energy and scattering energy ranges using a rapid and relatively simple full spectrum Raman excitation mapping technique. Identification of variation in scattering intensity with sample type and phonon energy related to different vibrational bands is clearly realized. Excitation profiles are found to vary strongly for different phonon modes. Some modes' Raman excitation profiles are extracted, with the G band profile compared to earlier work. Other modes, such as the M and iTOLA modes, have quite sharp resonance profiles and strong resonances. Conventional fixed wavelength Raman spectroscopy can miss these effects on the scattering intensities entirely due to the significant intensity changes observed for small variations in excitation wavelength. Peak intensities for phonon modes traceable to a pristine carbon lattice forming a SWCNT sidewall were greater for high-crystallinity materials. In the case of highly defective SWCNTs, the scattering intensities of the G band and the defect-related D band are demonstrated to be affected both in absolute intensities and in relative ratio, with the ratio that would be measured by single wavelength Raman scattering dependent on the excitation wavelength due to differences in the resonance energy profiles of the two bands. Lastly it is shown that the approach of this contribution yields a clear path toward increasing the rigor and quantification of resonance Raman scattering intensity measurements through tractable corrections of excitation and emission side variations in efficiency with excitation wavelength.

The Impact of Carbon Nanotube Length and Diameter on their Global Alignment by Dead-End Filtration

Dead-end filtration has proven to effectively prepare macroscopically (3.8 cm² ) aligned thin films from solutionbased single-wall carbon nanotubes (SWCNTs). However, to make this technique broadly applicable, the role of SWCNT length and diameter must be understood. To date, most groups report the alignment of unsorted, large diameter (≈1.4 nm) SWCNTs, but systematic studies on their small diameter are rare (≈0.78 nm). In this work, films with an area of A = 3.81 cm² and a thickness of ≈40 nm are prepared from length-sorted fractions comprising of small and large diameter SWCNTs, respectively. The alignment is characterized by cross-polarized microscopy, scanning electron microscopy, absorption and Raman spectroscopy. For the longest fractions (L_avg = 952 nm ± 431 nm, Δ = 1.58 and L_avg = 667 nm ± 246 nm, Δ = 1.55), the 2D order parameter, S2D, values of ≈0.6 and ≈0.76 are reported for the small and large diameter SWCNTs over an area of A = 625 µm² , respectively. A comparison of Derjaguin, Landau, Verwey, and Overbeek (DLVO) theory calculations with the aligned domain size is then used to propose a law identifying the required length of a carbon nanotube with a given diameter and zeta potential.

van der Waals SWCNT@BN Heterostructures Synthesized from Solution-Processed Chirality-Pure Single-Wall Carbon Nanotubes

Single-wall carbon nanotubes in boron nitride (SWCNT@BN) are one-dimensional van der Waals heterostructures that exhibit intriguing physical and chemical properties. As with their carbon nanotube counterparts, these heterostructures can form from different combinations of chiralities, providing rich structures but also posing a significant synthetic challenge to controlling their structure. Enabled by advances in nanotube chirality sorting, clean removal of the surfactant used for solution processing, and a simple method to fabricate free-standing submonolayer films of chirality pure SWCNTs as templates for the BN growth, we show it is possible to directly grow BN on chirality enriched SWCNTs from solution processing to form van der Waals heterostructures. We further report factors affecting the heterostructure formation, including an accelerated growth rate in the presence of H₂, and significantly improved crystallization of the grown BN, with the BN thickness controlled down to one single BN layer, through the presence of a Cu foil in the reactor. Transmission electron microscopy and electron energy-loss spectroscopic mapping confirm the synthesis of SWCNT@BN from the solution purified nanotubes. The photoluminescence peaks of both (7,5)- and (8,4)-SWCNT@BN heterostructures are found to redshift (by ∼10 nm) relative to the bare SWCNTs. Raman scattering suggests that the grown BN shells pose a confinement effect on the SWCNT core.

Efficient Inner-to-Outer Wall Energy Transfer in Highly Pure Double-Wall Carbon Nanotubes Revealed by Detailed Spectroscopy

The coaxial stacking of two single-wall carbon nanotubes (SWCNTs) into a double-wall carbon nanotube (DWCNT), forming a so-called one-dimensional van der Waals structure, leads to synergetic effects that dramatically affect the optical and electronic properties of both layers. In this work, we explore these effects in purified DWCNT samples by combining absorption, wavelength-dependent infrared fluorescence-excitation (PLE), and wavelength-dependent resonant Raman scattering (RRS) spectroscopy. Purified DWCNTs are obtained by careful solubilization that strictly avoids ultrasonication or by electronic-type sorting, both followed by a density gradient ultracentrifugation to remove unwanted SWCNTs that could obscure the DWCNT characterization. Chirality-dependent shifts of the radial breathing mode vibrational frequencies and transition energies of the inner and outer DWCNT walls with respect to their SWCNT analogues are determined by advanced two-dimensional fitting of RRS and PLE data of DWCNT and their reference SWCNT samples. This exhaustive data set verifies that fluorescence from the inner DWCNT walls of well-purified samples is severely quenched through efficient energy transfer from the inner to the outer DWCNT walls. Combined analysis of the PLE and RRS results further reveals that this transfer is dependent on the inner and outer wall chirality, and we identify the specific combinations dominant in our DWCNT samples. These obtained results demonstrate the necessity and value of a combined structural characterization approach including PLE and RRS spectroscopy for bulk DWCNT samples.

DNA-guided lattice remodeling of carbon nanotubes

Covalent modification of carbon nanotubes is a promising strategy for engineering their electronic structures. However, keeping modification sites in registration with a nanotube lattice is challenging. We report a solution using DNA-directed, guanine (G)-specific cross-linking chemistry. Through DNA screening we identify a sequence, C₃GC₇GC₃, whose reaction with an (8,3) enantiomer yields minimum disorder-induced Raman mode intensities and photoluminescence Stokes shift, suggesting ordered defect array formation. Single-particle cryo-electron microscopy shows that the C₃GC₇GC₃ functionalized (8,3) has an ordered helical structure with a 6.5 angstroms periodicity. Reaction mechanism analysis suggests that the helical periodicity arises from an array of G-modified carbon-carbon bonds separated by a fixed distance along an armchair helical line. Our findings may be used to remodel nanotube lattices for novel electronic properties.

Surfactant Chemistry and Polymer Choice Affect Single-Wall Carbon Nanotube Extraction Conditions in Aqueous Two-Polymer Phase Extraction

Quantitative determination of the effects of surfactant chemistry and polymer chain length on the concentration conditions necessary to yield extraction of specific single-wall carbon nanotube (SWNCT) species in an aqueous two-polymer phase extraction (ATPE) separation are reported. In particular, the effects of polyethylene glycol (PEG) chain length, surfactant ratios, and systematic structural variations of alkyl surfactants and bile salts on the surfactant ratios necessary for extraction were investigated using a recently reported fluorescence-based method. Alkyl surfactant tail length was observed to strongly affect the amount of surfactant necessary to cause PEG-phase extraction of nanotube species in ATPE, while variation in the anionic sulfate/sulfonate head group chemistry has less impact on the concentration necessary for extraction. Substitution of different bile salts results in different surfactant packings on the SWCNTs, with substitution greatly affecting the alkyl surfactant concentrations required for (n,m) extraction. Finally, distinct alkyl-to-bile surfactant ratios were found to extract specific (n,m) SWCNTs across the whole effective window of absolute concentrations, supporting the hypothesized competitive adsorption mechanism model of SWCNT sorting. Altogether, these results provide valuable insights into the underlying mechanisms behind ATPE-based SWCNT separations, towards further development and optimization of the ATPE method for SWCNT chirality and handedness sorting.

Versailles project on advanced materials and standards (VAMAS) interlaboratory study on measuring the number concentration of colloidal gold nanoparticles

We describe the outcome of a large international interlaboratory study of the measurement of particle number concentration of colloidal nanoparticles, project 10 of the technical working area 34, "Nanoparticle Populations" of the Versailles Project on Advanced Materials and Standards (VAMAS). A total of 50 laboratories delivered results for the number concentration of 30 nm gold colloidal nanoparticles measured using particle tracking analysis (PTA), single particle inductively coupled plasma mass spectrometry (spICP-MS), ultraviolet-visible (UV-Vis) light spectroscopy, centrifugal liquid sedimentation (CLS) and small angle X-ray scattering (SAXS). The study provides quantitative data to evaluate the repeatability of these methods and their reproducibility in the measurement of number concentration of model nanoparticle systems following a common measurement protocol. We find that the population-averaging methods of SAXS, CLS and UV-Vis have high measurement repeatability and reproducibility, with between-labs variability of 2.6%, 11% and 1.4% respectively. However, results may be significantly biased for reasons including inaccurate material properties whose values are used to compute the number concentration. Particle-counting method results are less reproducibile than population-averaging methods, with measured between-labs variability of 68% and 46% for PTA and spICP-MS respectively. This study provides the stakeholder community with important comparative data to underpin measurement reproducibility and method validation for number concentration of nanoparticles.

Computational Design of Homotetrameric Peptide Bundle Variants Spanning a Wide Range of Charge States

With the ability to design their sequences and structures, peptides can be engineered to realize a wide variety of functionalities and structures. Herein, computational design was used to identify a set of 17 peptides having a wide range of putative charge states but the same tetrameric coiled-coil bundle structure. Calculations were performed to identify suitable locations for ionizable residues (D, E, K, and R) at the bundle's exterior sites, while interior hydrophobic interactions were retained. The designed bundle structures spanned putative charge states of -32 to +32 in units of electron charge. The peptides were experimentally investigated using spectroscopic and scattering techniques. Thermal stabilities of the bundles were investigated using circular dichroism. Molecular dynamics simulations assessed structural fluctuations within the bundles. The cylindrical peptide bundles, 4 nm long by 2 nm in diameter, were covalently linked to form rigid, micron-scale polymers and characterized using transmission electron microscopy. The designed suite of sequences provides a set of readily realized nanometer-scale structures of tunable charge that can also be polymerized to yield rigid-rod polyelectrolytes.

Dependence of Single-Wall Carbon Nanotube Alignment on the Filter Membrane Interface in Slow Vacuum Filtration

The recent introduction of slow vacuum filtration (SVF) technology has shown great promise for reproducibly creating high-quality, large-area aligned films of single-wall carbon nanotubes (SWCNTs) from solution-based dispersions. Despite clear advantages over other SWCNT alignment techniques, SVF remains in the developmental stages due to a lack of an agreed-upon alignment mechanism, a hurdle which hinders SVF optimization. In this work, the filter membrane surface is modified to show how the resulting SWCNT nematic order can be significantly enhanced. It is observed that directional mechanical grooving on filter membranes does not play a significant role in SWCNT alignment, despite the tendency for nanotubes to follow the groove direction. Chemical treatments to the filter membrane are shown to increase SWCNT alignment by nearly 1/3. These findings suggest that membrane surface structure acts to create a directional flow along the filter membrane surface that can produce global SWCNT alignment during SVF, rather serving as an alignment template.

Tuning Net Charge in Aliphatic Polycarbonates Alters Solubility and Protein Complexation Behavior

A synthetic strategy yielded polyelectrolytes and polyampholytes with tunable net charge for complexation and protein binding. Organocatalytic ring-opening polymerizations yielded aliphatic polycarbonates that were functionalized with both carboxylate and ammonium side chains in a post-polymerization, radical-mediated thiol-ene reaction. Incorporating net charge into the polymer architecture altered the chain dimensions in phosphate buffered solution in a manner consistent with self-complexation and complexation behavior with model proteins. A net cationic polyampholyte with 5% of carboxylate side chains formed large clusters rather than small complexes with bovine serum albumin, while 50% carboxylate polyampholyte was insoluble. Overall, the aliphatic polycarbonates with varying net charge exhibited different macrophase solution behaviors when mixed with protein, where self-complexation appears to compete with protein binding and larger-scale complexation.

Optical Property Tuning of Single-Wall Carbon Nanotubes by Endohedral Encapsulation of a Wide Variety of Dielectric Molecules

Specific and tunable modification to the optical properties of single-wall carbon nanotubes (SWCNTs) is demonstrated through direct encapsulation into the nanotube interior of guest molecules with widely varying static dielectric constants. Filled through simple ingestion of the guest molecule, each SWCNT population is demonstrated to display a robust modification to absorbance, fluorescence, and Raman spectra. Over 30 distinct compounds, covering static dielectric constants from 1.8 to 109, are inserted in large diameter SWCNTs (d = 1.104-1.524 nm) and more than 10 compounds in small diameter SWCNTs (d = 0.747-1.153 nm), demonstrating that the general effect of filler dielectric on the nanotube optical properties is a monotonic energy reduction (red-shifting) of the optical transitions with increased magnitude of the dielectric constant. Systematic fitting of the two-dimensional fluorescence-excitation and Raman spectra additionally enables determination of the critical filling diameter for each molecule and distinguishing of overall trends from specific guest-host interactions. Comparisons to predictions from existing theory are presented, and specific guest molecule/SWCNT chirality combinations that disobey the general trend and theory are identified. A general increase of the fluorescence intensity and line narrowing is observed for low dielectric constants, with long linear alkane filled SWCNTs exhibiting emission intensities approaching those of empty SWCNTs. These results demonstrate an exploitable modulation in the optical properties of SWCNTs and provide a foundation for examining higher-order effects, such as due to nonbulk-like molecule stacking, in host-guest interactions in well-controlled nanopore size materials.

Brightly Luminescent CsPbBr3 Nanocrystals through Ultracentrifugation

Using a combination of density-gradient and analytical ultracentrifugation, we studied the photophysical profile of CsPbBr₃ nanocrystal (NC) suspensions by separating them into size-resolved fractions. Ultracentrifugation drastically alters the ligand profile of the NCs, which necessitates postprocessing to restore colloidal stability and enhance quantum yield (QY). Rejuvenated fractions show a 50% increase in QY compared to no treatment and a 30% increase with respect to the parent. Our results demonstrate how the NC environment can be manipulated to improve photophysical performance, even after there has been a measurable decline in the response. Size separation reveals blue-emitting fractions, a narrowing of photoluminescence spectra in comparison to the parent, and a crossover from single- to stretched-exponential relaxation dynamics with decreasing NC size. As a function of edge length, L, our results confirm that the photoluminescence peak energy scales a L^-2, in agreement with the simplest picture of quantum confinement.

Precise pitch-scaling of carbon nanotube arrays within three-dimensional DNA nanotrenches

Precise fabrication of semiconducting carbon nanotubes (CNTs) into densely aligned evenly spaced arrays is required for ultrascaled technology nodes. We report the precise scaling of inter-CNT pitch using a supramolecular assembly method called spatially hindered integration of nanotube electronics. Specifically, by using DNA brick crystal-based nanotrenches to align DNA-wrapped CNTs through DNA hybridization, we constructed parallel CNT arrays with a uniform pitch as small as 10.4 nanometers, at an angular deviation <2° and an assembly yield >95%.

Bright Silicon Nanocrystals from a Liquid Precursor: Quasi-Direct Recombination with High Quantum Yield

Silicon nanocrystals (SiNCs) with bright bandgap photoluminescence (PL) are of current interest for a range of potential applications, from solar windows to biomedical contrast agents. Here, we use the liquid precursor cyclohexasilane (Si₆H₁₂) for the plasma synthesis of colloidal SiNCs with exemplary core emission. Through size separation executed in an oxygen-shielded environment, we achieve PL quantum yields (QYs) approaching 70% while exposing intrinsic constraints on efficient core emission from smaller SiNCs. Time-resolved PL spectra of these fractions in response to femtosecond pulsed excitation reveal a zero-phonon radiative channel that anticorrelates with QY, which we model using advanced computational methods applied to a 2 nm SiNC. Our results offer additional insight into the photophysical interplay of the nanocrystal surface, quasi-direct recombination, and efficient SiNC core PL.

Improved Electrophoretic Deposition of Vertical Single Wall Carbon Nanotubes with Nanoscopic Electrostatic Lenses

Under certain conditions, electrophoretic deposition (EPD) of single-wall carbon nanotubes (SWCNTs) onto metal at the base of nanoscale insulating windows can result in a single SWCNT per window, bonded at one end to the metal. During EPD charge, buildup on the insulator creates electrostatic lenses at the windows that control the trajectory of the SWCNTs. The aim is to develop a reproducible process for deposition of individual vertically oriented SWCNTs into each window to enable novel devices. The length of the SWCNTs is shown to be the most critical parameter in achieving results that could be used for devices. In particular, single nanotube deposition in windows by EPD was achieved with SWCNTs with lengths on the order of the window depth. By performing current vs voltage (IV) measurements against a platinum wire in a phosphate buffer and by modeling the data, the presence of the nanotube can be detected, the contact interface can be studied, and the nanotube’s viability for device applications can be determined. These results provide a basis for process integration of vertical SWCNTs using EPD.

Separation of Specific Single-Enantiomer Single-Wall Carbon Nanotubes in the Large-Diameter Regime

The enantiomer-level isolation of single-walled carbon nanotubes (SWCNTs) in high concentration and with high purity for nanotubes greater than 1.1 nm in diameter is demonstrated using a two-stage aqueous two-phase extraction (ATPE) technique. In total, five different nanotube species of ∼1.41 nm diameter are isolated, including both metallics and semiconductors. We characterize these populations by absorbance spectroscopy, circular dichroism spectroscopy, resonance Raman spectroscopy, and photoluminescence mapping, revealing and substantiating mod-dependent optical dependencies. Using knowledge of the competitive adsorption of surfactants to the SWCNTs that controls partitioning within the ATPE separation, we describe an advanced acid addition methodology that enables the fine control of the separation of these select nanotubes. Furthermore, we show that endohedral filling is a previously unrecognized but important factor to ensure a homogeneous starting material and further enhance the separation yield, with the best results for alkane-filled SWCNTs, followed by empty SWCNTs, with the intrinsic inhomogeneity of water-filled SWCNTs causing them to be worse for separations. Lastly, we demonstrate the potential use of these nanotubes in field-effect transistors.

Global Alignment of Solution-Based Single-Wall Carbon Nanotube Films via Machine-Vision Controlled Filtration

Over the past decade, substantial progress has been made in the chemical control (chiral enrichment, length sorting, handedness selectivity, and filling substance) of single-wall carbon nanotubes (SWCNTs). Recently, it was shown that large, horizontally aligned films can be created out of postprocessed SWCNT solutions. Here, we use machine-vision automation and parallelization to simultaneously produce globally aligned SWCNT films using pressure-driven filtration. Feedback control enables filtration to occur with a constant flow rate that not only improves the nematic ordering of the SWCNT films but also provides the ability to align a wide range of SWCNT types and on a variety of nanoporous membranes using the same filtration parameters. Using polarized optical spectroscopic techniques, we show that under standard implementation, meniscus combing produces a two-dimensional radial SWCNT alignment on one side of the film. After we flatten the meniscus through silanization, spatially resolved nematicity maps on both sides of the SWCNT film reveal global alignment across the entire structure. From experiments changing ionic strength and membrane charging, we provide evidence that the SWCNT alignment mechanism stems from an interplay of intertube interactions and ordered membrane charging. This work opens up the possibility of creating globally aligned SWCNT film structures for a new generation of nanotube electronics and optical control elements.

Aqueous two-polymer phase extraction of single-wall carbon nanotubes using surfactants

This review details the current state of the art in aqueous two-phase extraction (ATPE) based separations of surfactant dispersed single-wall carbon nanotubes by their chemical species, i.e., (n,m) structure, semiconducting or metallic nature, and enantiomeric handedness. Discussions of the factors affecting each separation, including workflow effects, variations of different surfactant and nanotube materials, and the underlying physical mechanism are presented. Lastly an outlook on the applications of ATPE at bench scale and implementation to larger scales is discussed, along with identification of research directions that could further support ATPE development.

Structural insights into DNA-stabilized silver clusters

Despite their great promise as fluorescent biological probes and sensors, the structure and dynamics of Ag complexes derived from single stranded DNA (ssDNA) are less understood than their double stranded counterparts. In this work, we seek new insights into the structure of single AgNssDNA clusters using analytical ultracentrifugation (AUC), nuclear magnetic resonance spectroscopy, infrared spectroscopy and molecular dynamics simulations (MD) of a fluorescent (AgNssDNA)8+ nanocluster. The results suggest that the purified (AgNssDNA)8+ nanocluster is a mixture of predominantly Ag15 and Ag16 species that prefer two distinct long-lived conformational states: one extended, the other approaching spherical. However, the ssDNA strands within these clusters are highly mobile. Ag(i) interacts preferentially with the nucleobase rather than the phosphate backbone, causing a restructuring of the DNA strand relative to the bare DNA. Infrared spectroscopy and MD simulations of (AgNssDNA)8+ and model nucleic acid homopolymers suggest that Ag(i) has a higher affinity for cytosine over guanine bases, little interaction with adenine, and virtually none with thymine. Ag(i) shows a tendency to interact with cytosine N3 and O2 and guanine N7 and O6, opening the possibility for a Ag(i)-base bifurcated bond to act as a nanocluster nucleation and strand stabilizing site. This work provides valuable insight into nanocluster structure and dynamics which drive stability and optical properties, and additional studies using these types of characterization techniques are important for the rational design of single stranded AgDNA nanocluster sensors.

Cross-sectional study of loss of life expectancy at different ages related to firearm deaths among black and white Americans

Understanding the life years lost by assault and suicide due to firearms among white and black Americans can help us understand the race-specific and intent-specific firearm mortality burden and inform prevention programmes. The objective was to assess national and race-specific life expectancy loss related to firearms in the USA due to assault and suicide. We used firearm mortality data available from Wide-ranging Online Data for Epidemiologic Research to calculate the life expectancy loss between 2000 and 2016 separately for assaults and suicides among white and black Americans. The total national life expectancy loss due to firearms was 2.48 (2.23 whites, 4.14 blacks) years. The total life expectancy loss in years due to firearm assault was 0.95 (0.51 whites, 3.41 blacks) and suicide was 1.43 (1.62 whites, 0.60 blacks), respectively. Firearm life expectancy loss in years at birth, 20, 40 and 60 years of age was 0.29 (0.22 whites, 0.56 blacks), 0.25 (0.21 whites, 0.47 blacks), 0.09 (0.10 whites, 0.08 blacks) and 0.03 (0.03 whites, 0.01 blacks) years. National firearm life expectancy loss in days from 20 to 60 years declined by 79.5 (65.8 whites, 166.3 blacks); for assault by 37.5 (18.9 whites, 141.0 blacks) and suicides by 38.7 (43.9 whites, 20.3 blacks). Americans lose substantial years of life due to firearm injury. This loss in life years is characterised by a large racial gap by age and intent. Tailored prevention programmes are needed to reduce this loss and lessen the racial gaps.

Self-assembly and soluble aggregate behavior of computationally designed coiled-coil peptide bundles

Coiled-coil peptides have proven useful in a range of materials applications ranging from the formation of well-defined fibrils to responsive hydrogels. The ability to design from first principles their oligomerization and subsequent higher order assembly offers their expanded use in producing new materials. Toward these ends, homo-tetrameric, antiparallel, coiled-coil, peptide bundles have been designed computationally, synthesized via solid-phase methods, and their solution behavior characterized. Two different bundle-forming peptides were designed and examined. Within the targeted coiled coil structure, both bundles contained the same hydrophobic core residues. However, different exterior residues on the two different designs yielded sequences with different distributions of charged residues and two different expected isoelectric points of pI 4.4 and pI 10.5. Both coiled-coil bundles were extremely stable with respect to temperature (Tm > 80 C) and remained soluble in solution even at high (millimolar) peptide concentrations. The coiled-coil tetramer was confirmed to be the dominant species in solution by analytical sedimentation studies and by small-angle neutron scattering, where the scattering form factor is well represented by a cylinder model with the dimensions of the targeted coiled coil. At high concentrations (5-15 mM), evidence of interbundle structure was observed via neutron scattering. At these concentrations, the synthetic bundles form soluble aggregates, and interbundle distances can be determined via a structure factor fit to scattering data. The data support the successful design of robust coiled-coil bundles. Despite their different sequences, each sequence forms loosely associated but soluble aggregates of the bundles, suggesting similar dissociated states for each. The behavior of the dispersed bundles is similar to that observed for natural proteins.

A Low Energy Route to DNA-Wrapped Carbon Nanotubes via Replacement of Bile Salt Surfactants

DNA-wrapped carbon nanotubes are a class of bionano hybrid molecules that have enabled carbon nanotube sorting, controlled assembly, and biosensing and bioimaging applications. The current method of synthesizing these hybrids via direct sonication of DNA/nanotube mixtures is time-consuming and not suitable for high-throughput synthesis and combinatorial sequence screening. Additionally, the direct sonication method does not make use of nanotubes presorted by extensively developed surfactant-based methods, is not effective for large diameter (>1 nm) tubes, and cannot maintain secondary and tertiary structural and functional domains present in certain DNA sequences. Here, we report a simple, quick, and robust process to produce DNA-wrapped carbon nanotube hybrids with nanotubes of broad diameter range and DNA of arbitrary sequence. This is accomplished by exchanging strong binding bile salt surfactant coating with DNA in methanol/water mixed solvent and subsequent precipitation with isopropyl alcohol. The exchange process can be completed within 10 min and converts over 90% nanotubes into the DNA wrapped form. Applying the exchange process to nanotubes presorted by surfactant-based methods, we show that the resulting DNA-wrapped carbon nanotubes can be further sorted to produce nanotubes with defined handedness, helicity, and endohedral filling. The exchange method greatly expands the structural and functional variety of DNA-wrapped carbon nanotubes and opens possibilities for DNA-directed assembly of structurally sorted nanotubes and high-throughput screening of properties that are controlled by the wrapping DNA sequences.

The Hidden Epidemic of Firearm Injury: Increasing Firearm Injury Rates During 2001-2013

Investigating firearm injury trends over the past decade, we examined temporal trends overall and according to race/ethnicity and intent in fatal and nonfatal firearm injuries (FFIs and NFIs) in United States during 2001-2013. Counts of FFIs and estimated counts of NFIs were obtained from the Centers for Disease Control and Prevention's Web-based Injury Statistics Query and Reporting System. Poisson regression was used to analyze overall and subgroup temporal trends and to estimate annual change per 100,000 persons (change). Total firearm injuries (n = 1,328,109) increased annually by 0.36 (Ptrend < 0.0001). FFIs remained constant (change = 0.02; Ptrend = 0.22) while NFIs increased (change = 0.35; Ptrend < 0.0001). Homicide FFIs declined (change = -0.05; Ptrend < 0.0001) while homicide NFIs increased (change = 0.43; Ptrend < 0.0001). Suicide FFIs increased (change = 0.07; Ptrend < 0.0001) while unintentional FFIs and NFIs declined (changes = -0.01 and -0.09, respectively; Ptrend < 0.0001 and 0.005). Among whites, FFIs (change = 0.15; Ptrend < 0.0001) and NFIs (change = 0.13; Ptrend < 0.0001) increased; among blacks, FFIs declined (change = -0.20; Ptrend < 0.0001). Among Hispanics, FFIs declined (change = -0.28; Ptrend < 0.0001) while NFIs increased (change = 0.55; Ptrend = 0.014). The endemic firearm-related injury rates during the first decade of the 21st century mask a shift from firearm deaths towards a rapid rise in nonfatal injuries.

Separation of double-wall carbon nanotubes by electronic type and diameter

We introduce a new procedure for the efficient isolation and subsequent separation of double-wall carbon nanotubes (DWCNTs). A simplified, rate zonal ultracentrifugation (RZU) process is first applied to obtain samples of highly-enriched DWCNTs from a raw carbon nanotube material that has both single- and double-wall carbon nanotubes. Using this purified DWCNT suspension, we demonstrate for the first time that DWCNTs can be further processed using aqueous two-phase extraction (ATPE) for sequential separation by electronic structure and diameter. Additionally, we introduce analytical ultracentrifugation (AUC) as a new method for DWCNT characterization to assess DWCNT purity in separated samples. Results from AUC analysis are utilized to compare two DWCNT separation schemes. We find that RZU processing followed by sequential bandgap and diameter sorting via ATPE provides samples of highest DWCNT enrichment, whereas single-step redox sorting of the same raw material through ATPE yields SWCNT/DWCNT mixtures of similar diameter and electronic character. The presented methods offer significant advancement in DWCNT processing and separation while also providing a promising alternative for DWCNT sample analysis.

Differentiating Left- and Right-Handed Carbon Nanotubes by DNA

New structural characteristics emerge when solid-state crystals are constructed in lower dimensions. This is exemplified by single-wall carbon nanotubes, which exhibit a degree of freedom in handedness and a multitude of helicities that give rise to three distinct types of electronic structures: metals, quasi-metals, and semiconductors. Here we report the use of intrinsically chiral single-stranded DNA to achieve simultaneous handedness and helicity control for all three types of nanotubes. We apply polymer aqueous two-phase systems to select special DNA-wrapped carbon nanotubes, each of which we argue must have an ordered DNA structure that binds to a nanotube of defined handedness and helicity and resembles a well-folded biomacromolecule with innate stereoselectivity. We have screened over 300 short single-stranded DNA sequences with palindrome symmetry, leading to the selection of more than 20 distinct carbon nanotube structures that have defined helicity and handedness and cover the entire chiral angle range and all three electronic types. The mechanism of handedness selection is illustrated by a DNA sequence that adopts two distinct folds on a pair of (6,5) nanotube enantiomers, rendering them large differences in fluorescence intensity and chemical reactivity. This result establishes a first example of functionally distinguishable left- and right-handed carbon nanotubes. Taken together, our work demonstrates highly efficient enantiomer differentiation by DNA and offers a first comprehensive solution to achieve simultaneous handedness and helicity control for all three electronic types of carbon nanotubes.

Enhancing single-wall carbon nanotube properties through controlled endohedral filling

Chemical control of the endohedral volume of single-wall carbon nanotubes (SWCNTs) via liquid-phase filling is established to be a facile strategy to controllably modify properties of SWCNTs in manners significant for processing and proposed applications. Encapsulation of over 20 different compounds with distinct chemical structures, functionalities, and effects is demonstrated in SWCNTs of multiple diameter ranges, with the ability to fill the endohedral volume based on the availability of the core volume and compatibility of the molecule's size with the cross-section of the nanotube's cavity. Through exclusion of ingested water and selection of the endohedral chemical environment, significant improvements to the optical properties of dispersed SWCNTs such as narrowed optical transition linewidths and enhanced fluorescence intensities are observed. Examples of tailoring modified properties towards applications or improved processing by endohedral passivation are discussed.

Intensity Ratio of Resonant Raman Modes for (n,m) Enriched Semiconducting Carbon Nanotubes

Relative intensities of resonant Raman spectral features, specifically the radial breathing mode (RBM) and G modes, of 11, chirality-enriched, single-wall carbon nanotube (SWCNT) species were established under second-order optical transition excitation. The results demonstrate an under-recognized complexity in the evaluation of Raman spectra for the assignment of (n,m) population distributions. Strong chiral angle and mod dependencies affect the intensity ratio of the RBM to G modes and can result in misleading interpretations. Furthermore, we report five additional (n,m) values for the chirality-dependent G(+) and G(-) Raman peak positions and intensity ratios; thereby extending the available data to cover more of the smaller diameter regime by including the (5,4) second-order, resonance Raman spectra. Together, the Raman spectral library is demonstrated to be sufficient for decoupling G peaks from multiple species via a spectral fitting process, and enables fundamental characterization even in mixed chiral population samples.

Quantification of Carbon Nanotubes in Environmental Matrices: Current Capabilities, Case Studies, and Future Prospects

Carbon nanotubes (CNTs) have numerous exciting potential applications and some that have reached commercialization. As such, quantitative measurements of CNTs in key environmental matrices (water, soil, sediment, and biological tissues) are needed to address concerns about their potential environmental and human health risks and to inform application development. However, standard methods for CNT quantification are not yet available. We systematically and critically review each component of the current methods for CNT quantification including CNT extraction approaches, potential biases, limits of detection, and potential for standardization. This review reveals that many of the techniques with the lowest detection limits require uncommon equipment or expertise, and thus, they are not frequently accessible. Additionally, changes to the CNTs (e.g., agglomeration) after environmental release and matrix effects can cause biases for many of the techniques, and biasing factors vary among the techniques. Five case studies are provided to illustrate how to use this information to inform responses to real-world scenarios such as monitoring potential CNT discharge into a river or ecotoxicity testing by a testing laboratory. Overall, substantial progress has been made in improving CNT quantification during the past ten years, but additional work is needed for standardization, development of extraction techniques from complex matrices, and multimethod comparisons of standard samples to reveal the comparability of techniques.

Firearm legislation and firearm mortality in the USA: a cross-sectional, state-level study

BACKGROUND

In an effort to reduce firearm mortality rates in the USA, US states have enacted a range of firearm laws to either strengthen or deregulate the existing main federal gun control law, the Brady Law. We set out to determine the independent association of different firearm laws with overall firearm mortality, homicide firearm mortality, and suicide firearm mortality across all US states. We also projected the potential reduction of firearm mortality if the three most strongly associated firearm laws were enacted at the federal level.

METHODS

We constructed a cross-sectional, state-level dataset from Nov 1, 2014, to May 15, 2015, using counts of firearm-related deaths in each US state for the years 2008-10 (stratified by intent [homicide and suicide]) from the US Centers for Disease Control and Prevention's Web-based Injury Statistics Query and Reporting System, data about 25 firearm state laws implemented in 2009, and state-specific characteristics such as firearm ownership for 2013, firearm export rates, and non-firearm homicide rates for 2009, and unemployment rates for 2010. Our primary outcome measure was overall firearm-related mortality per 100,000 people in the USA in 2010. We used Poisson regression with robust variances to derive incidence rate ratios (IRRs) and 95% CIs.

FINDINGS

31,672 firearm-related deaths occurred in 2010 in the USA (10·1 per 100,000 people; mean state-specific count 631·5 [SD 629·1]). Of 25 firearm laws, nine were associated with reduced firearm mortality, nine were associated with increased firearm mortality, and seven had an inconclusive association. After adjustment for relevant covariates, the three state laws most strongly associated with reduced overall firearm mortality were universal background checks for firearm purchase (multivariable IRR 0·39 [95% CI 0·23-0·67]; p=0·001), ammunition background checks (0·18 [0·09-0·36]; p<0·0001), and identification requirement for firearms (0·16 [0·09-0·29]; p<0·0001). Projected federal-level implementation of universal background checks for firearm purchase could reduce national firearm mortality from 10·35 to 4·46 deaths per 100,000 people, background checks for ammunition purchase could reduce it to 1·99 per 100,000, and firearm identification to 1·81 per 100,000.

INTERPRETATION

Very few of the existing state-specific firearm laws are associated with reduced firearm mortality, and this evidence underscores the importance of focusing on relevant and effective firearms legislation. Implementation of universal background checks for the purchase of firearms or ammunition, and firearm identification nationally could substantially reduce firearm mortality in the USA.

FUNDING

None.

Characterizing the Effect of Salt and Surfactant Concentration on the Counterion Atmosphere around Surfactant Stabilized SWCNTs Using Analytical Ultracentrifugation

Accurate characterization of dispersed-phase nanoparticle properties such as density, size, solvation, and charge is necessary for their utilization in applications such as medicine, energy, and materials. Herein, analytical ultracentrifugation (AUC) is used to quantify bile salt surfactant adsorption on length sorted (7,6) single-wall carbon nanotubes (SWCNTs) as a function of bulk surfactant concentration and in the presence of varying quantities of a monovalent salt-sodium chloride. These measurements provide high precision adsorbed surfactant density values in the literature for only the second SWCNT structure to date and report the quantity of adsorbed surfactant across a broad range of bulk surfactant concentrations utilized in SWCNT dispersion processing. Second, the measurements presented herein unambiguously demonstrate, via AUC, a direct relation between the size of the counterion cloud around a surfactant-stabilized SWCNT and solution ionic strength. The results show that changes in the size of the counterion cloud around surfactant-stabilized SWCNT are attributable to electrostatic phenomenon and not to changes in the quantity of adsorbed surfactant with salt addition. These results provide important reference values for projecting SWCNT dispersion behavior as a function of solution conditions and extend the range of nanoparticle properties measurable via AUC.

Impact of SWCNT processing on nanotube-silicon heterojunctions

Single-wall carbon nanotube (SWCNT) films are ideal components for thin, flexible, and durable electronic devices. Here, we use a variety of processing approaches to fabricate SWCNT-silicon heterojunctions from both unsorted and chirality-enriched SWCNTs. Through measured structure/processing/property relationships, we quantify the influence of SWCNT purity, alignment and residual doping on device performance and diode characteristics. Our results show that mixed-type unaligned SWCNTs processed in super-acid solvents can achieve state-of-the-art performance. The devices perform comparably to those fabricated from type or chiral-purified SWCNTs, despite what appear to be significant deviations from ideal diode behavior. Our results clarify a direct route for processing nanotube-silicon heterojunctions while providing additional insight into the underlying nature of these devices.

A facile and low-cost length sorting of single-wall carbon nanotubes by precipitation and applications for thin-film transistors

Semiconducting single-wall carbon nanotubes (SWCNTs) with long lengths are highly desirable for many applications such as thin-film transistors and circuits. Previously reported length sorting techniques usually require sophisticated instrumentation and are hard to scale up. In this paper, we report for the first time a general phenomenon of a length-dependent precipitation of surfactant-dispersed carbon nanotubes by polymers, salts, and their combinations. Polyelectrolytes such as polymethacrylate (PMAA) and polystyrene sulfonate (PSS) are found to be especially effective on cholate and deoxycholate dispersed SWCNTs. By adding PMAA to these nanotube dispersions in a stepwise fashion, we have achieved nanotube precipitation in a length-dependent order: first nanotubes with an average length of 650 nm, and then successively of 450 nm, 350 nm, and 250 nm. A similar effect of nanotube length sorting has also been observed for PSS. To demonstrate the utility of the length fractionation, the 650 nm-long nanotube fraction was subjected to an aqueous two-phase separation to obtain semiconducting enriched nanotubes. Thin-film transistors fabricated with the resulting semiconducting SWCNTs showed a carrier mobility up to 18 cm(2) (V s)(-1) and an on/off ratio up to 10(7). Our result sheds new light on the phase behavior of aqueous nanotube dispersions under high concentrations of polymers and salts, and offers a facile, low-cost, and scalable method to produce length sorted semiconducting nanotubes for macroelectronics applications.

Isolation of >1 nm Diameter Single-Wall Carbon Nanotube Species Using Aqueous Two-Phase Extraction

In this contribution we demonstrate the effective separation of single-wall carbon nanotube (SWCNT) species with diameters larger than 1 nm through multistage aqueous two-phase extraction (ATPE), including isolation at the near-monochiral species level up to at least the diameter range of SWCNTs synthesized by electric arc synthesis (1.3-1.6 nm). We also demonstrate that refined species are readily obtained from both the metallic and semiconducting subpopulations of SWCNTs and that this methodology is effective for multiple SWCNT raw materials. Using these data, we report an empirical function for the necessary surfactant concentrations in the ATPE method for separating different SWCNTs into either the lower or upper phase as a function of SWCNT diameter. This empirical correlation enables predictive separation design and identifies a subset of SWCNTs that behave unusually as compared to other species. These results not only dramatically increase the range of SWCNT diameters to which species selective separation can be achieved but also demonstrate that aqueous two-phase separations can be designed across experimentally accessible ranges of surfactant concentrations to controllably separate SWCNT populations of very small (∼0.62 nm) to very large diameters (>1.7 nm). Together, the results reported here indicate that total separation of all SWCNT species is likely feasible by the ATPE method, especially given future development of multistage automated extraction techniques.

A multilaboratory comparison of calibration accuracy and the performance of external references in analytical ultracentrifugation

Analytical ultracentrifugation (AUC) is a first principles based method to determine absolute sedimentation coefficients and buoyant molar masses of macromolecules and their complexes, reporting on their size and shape in free solution. The purpose of this multi-laboratory study was to establish the precision and accuracy of basic data dimensions in AUC and validate previously proposed calibration techniques. Three kits of AUC cell assemblies containing radial and temperature calibration tools and a bovine serum albumin (BSA) reference sample were shared among 67 laboratories, generating 129 comprehensive data sets. These allowed for an assessment of many parameters of instrument performance, including accuracy of the reported scan time after the start of centrifugation, the accuracy of the temperature calibration, and the accuracy of the radial magnification. The range of sedimentation coefficients obtained for BSA monomer in different instruments and using different optical systems was from 3.655 S to 4.949 S, with a mean and standard deviation of (4.304 ± 0.188) S (4.4%). After the combined application of correction factors derived from the external calibration references for elapsed time, scan velocity, temperature, and radial magnification, the range of s-values was reduced 7-fold with a mean of 4.325 S and a 6-fold reduced standard deviation of ± 0.030 S (0.7%). In addition, the large data set provided an opportunity to determine the instrument-to-instrument variation of the absolute radial positions reported in the scan files, the precision of photometric or refractometric signal magnitudes, and the precision of the calculated apparent molar mass of BSA monomer and the fraction of BSA dimers. These results highlight the necessity and effectiveness of independent calibration of basic AUC data dimensions for reliable quantitative studies.

Redox sorting of carbon nanotubes

This work expands the redox chemistry of single-wall carbon nanotubes (SWCNTs) by investigating its role in a number of SWCNT sorting processes. Using a polyethylene glycol (PEG)/dextran (DX) aqueous two-phase system, we show that electron-transfer between redox molecules and SWCNTs triggers reorganization of the surfactant coating layer, leading to strong modulation of nanotube partition in the two phases. While the DX phase is thermodynamically more favored by an oxidized SWCNT mixture, the mildly reducing PEG phase is able to recover SWCNTs from oxidation and extract them successively from the DX phase. Remarkably, the extraction order follows SWCNT bandgap: semiconducting nanotubes of larger bandgap first, followed by semiconducting nanotubes of smaller bandgap, then nonarmchair metallic tubes of small but nonvanishing bandgap, and finally armchair metallic nanotubes of zero bandgap. Furthermore, we show that redox-induced surfactant reorganization is a common phenomenon, affecting nanotube buoyancy in a density gradient field, affinity to polymer matrices, and solubility in organic solvents. These findings establish redox modulation of surfactant coating structures as a general mechanism for tuning a diverse range of SWCNT sorting processes and demonstrate for the first time that armchair and nonarmchair metallic SWCNTs can be separated by their differential response to redox.

State-specific, racial and ethnic heterogeneity in trends of firearm-related fatality rates in the USA from 2000 to 2010

OBJECTIVES

To document overall, racial, ethnic and intent-specific spatiotemporal trends of firearm-related fatality rates (FRF rates) in the USA.

DESIGN

Cross-sectional study per year from 2000 to 2010.

SETTING USA PARTICIPANTS

Aggregate count of all people in the USA from 2000 to 2010.

OUTCOME MEASURES

Data from the Web-based Injury Statistics Query and Reporting System from 2000 to 2010 was used to determine annual FRF rates per 100,000 and by states, race, ethnicity and intent.

RESULTS

The average national 11-year FRF rate was 10.21/100,000, from 3.02 in Hawaii to 18.62 in Louisiana: 60% of states had higher than national rates and 41 states showed no temporal change. The average national FRF rates among African-Americans and Caucasians were 18.51 and 9.05/100,000 and among Hispanics and non-Hispanics were 7.13 and 10.13/100,000; Hispanics had a decreasing change of -0.18, p trend<0.0001. In states with increasing trends (Florida and Massachusetts), Caucasians and non-Hispanics drove the rise; while in states with decreasing trends (California, North Carolina, Arizona, Nevada, New York, Illinois, Maryland), Hispanics and African-Americans drove the fall. The average national FRF rates due to homicides (4.1/100,000) and suicides (5.8/100,000) remained constant, but varied between states.

CONCLUSIONS

Endemic national FRF rates mask a wide variation in time trends between states. FRF rates were twice as high in African-Americans than Caucasians but decreased among Hispanics. Efforts to identify state-specific best practices can contribute to changes in national FRF rates that remain high.

Rod hydrodynamics and length distributions of single-wall carbon nanotubes using analytical ultracentrifugation

Because of their repetitive chemical structure, extreme rigidity, and the separability of populations with varying aspect ratio, SWCNTs are excellent candidates for use as model rodlike colloids. In this contribution, the sedimentation velocities of length and density sorted single-wall carbon nanotubes (SWCNTs) are compared to predictions from rod hydrodynamic theories of increasing complexity over a range of aspect ratios from <50 to >400. Independently measuring all contributions to the sedimentation velocity besides the shape factor, excellent agreement is found between the experimental findings and theoretical predictions for numerically calculated hydrodynamic radius values and for multiterm analytical expansion approximations; values for the hydrodynamic radii in these cases are additionally found to be consistent with the apparent hydrated particle radius determined independently by buoyancy measurements. Lastly, we utilize this equivalency to calculate the apparent distribution of nanotube lengths in each population from their sedimentation coefficient distribution without adjustable parameters, achieving excellent agreement with distributions from atomic force microscopy. The method developed herein provides an alternative for the ensemble measurement of SWCNT length distributions and others rodlike particles.

Isolation of specific small-diameter single-wall carbon nanotube species via aqueous two-phase extraction

Aqueous two-phase extraction is demonstrated to enable isolation of single semiconducting and metallic single-wall carbon nanotube species from a synthetic mixture. The separation is rapid and robust, with remarkable tunability via modification of the surfactant environment set for the separation.

Single-step total fractionation of single-wall carbon nanotubes by countercurrent chromatography

Development of simple processes to fractionate synthetic mixtures of single-wall carbon nanotubes (SWCNTs) into individual species is crucial to many applications. Existing methods for single-chirality SWCNT purification are cumbersome, often requiring multiple steps and different conditions for different species. Here, we report a method to achieve total fractionation of a synthetic SWCNT mixture by countercurrent chromatography, resulting in purification of many single-chirality SWCNT species in a single run. This method is based on a tunable partition of sodium deoxycholate dispersed SWCNTs in a polyethylene glycol/dextran aqueous two-phase system. By running the mobile phase with 0.02% of sodium deoxycholate and a gradient of sodium dodecyl sulfate from 0.1% to 0.7% (w/w), we observe clear diameter-dependent elution, with ∼ 90% total recovery. Among all the fractions collected, a number of them are enriched in single-chirality (9,4), (7,5), (7,6), (8,3), (6,5) species, while most of the remaining ones contain no more than 2-3 major species. We also observe strong (n,m)-dependent elution peak width due to the enantiomer-resolved partition. These results demonstrate countercurrent chromatography (CCC) as an effective way to obtain high purity (n, m) species, and suggest the potential of CCC as an analytical tool for chirality distribution mapping of synthetic SWCNT mixtures.

Firearm-related hospitalizations and in-hospital mortality in the United States, 2000-2010

Most firearm-related injuries are nonfatal and require hospitalization. Using data on 3,257,720 hospitalizations from the National Hospital Discharge Survey (2000-2010), we determined overall and cause-, gender-, and race-specific trends in firearm-related hospitalization (FRH) and determinants of in-hospital firearm mortality. Types of FRH evaluated, according to International Classification of Diseases, Ninth Revision, Clinical Modification, E-diagnostic codes, were accident (codes E922.0-E922.3, E922.8, and E922.9), assault (codes E965.0-E965.4), attempted suicide (codes E955.0-E955.4), legal intervention (code E970), undetermined intent (codes E985.0-E985.3), and war (code E991). A moderate reduction in FRH rates was observed from 2000 to 2011: from 62 FRHs per 100,000 hospitalizations to 57 per 100,000 (P-trend = 0.0016). The majority of FRHs were due to assault (P-trend = 0.19) or accident (P-trend = 0.32) and showed no significant reduction in rates over time, whereas rates for 14% of all FRHs-those due to attempted suicide (P-trend = 0.002) and undetermined intent (P-trend = 0.0029)-declined moderately. Moderate declines were observed among both blacks (from 213.1 FRHs per 100,000 hospitalizations to 164.4 per 100,000; P-trend = 0.049) and whites (from 38.4 FRHs per 100,000 hospitalizations to 32.2 per 100,000; P-trend = 0.031). The decline was significant only among men (effect size = 0.9, P-trend = 0.004). In conclusion, the reduction in FRH was driven by a reduction in self-inflicted and undetermined injuries. FRH rates were 6-fold greater among blacks than among whites and 14-fold greater in men than in women throughout the period.

Analyzing surfactant structures on length and chirality resolved (6,5) single-wall carbon nanotubes by analytical ultracentrifugation

The structure and density of the bound interfacial surfactant layer and associated hydration shell were investigated using analytical ultracentrifugation for length and chirality purified (6,5) single-wall carbon nanotubes (SWCNTs) in three different bile salt surfactant solutions. The differences in the chemical structures of the surfactants significantly affect the size and density of the bound surfactant layers. As probed by exchange of a common parent nanotube population into sodium deoxycholate, sodium cholate, or sodium taurodeoxycholate solutions, the anhydrous density of the nanotubes was least for the sodium taurodeoxycholate surfactant, and the absolute sedimentation velocities greatest for the sodium cholate and sodium taurodeoxycholate surfactants. These results suggest that the thickest interfacial layer is formed by the deoxycholate, and that the taurodeoxycholate packs more densely than either sodium cholate or deoxycholate. These structural differences correlate well to an observed 25% increase in fluorescence intensity relative to the cholate surfactant for deoxycholate and taurodeoxycholate dispersed SWCNTs displaying equivalent absorbance spectra. Separate sedimentation velocity experiments including the density modifying agent iodixanol were used to establish the buoyant density of the (6,5) SWCNT in each of the bile salt surfactants; from the difference in the buoyant and anhydrous densities, the largest hydrated diameter is observed for sodium deoxycholate. Understanding the effects of dispersant choice and the methodology for measurement of the interfacial density and hydrated diameter is critical for rationally advancing separation strategies and applications of nanotubes.

Size and density measurement of core-shell Si nanoparticles by analytical ultracentrifugation

Si nanocrystals, terminated with cyclohexane and allylamine, were analyzed using analytical ultracentrifugation (AUC), dynamic light scattering (DLS) and transmission electron microscopy. We found that AUC yielded equivalent particle size distribution data to other nanoparticle characterization techniques, while also providing important information not probed by techniques such as DLS regarding the relative size of the particle core and shell components and the overall effective particle density. Estimates of particle core and shell dimensions are consistent with the particle's optical properties within the quantum confinement representation and available theoretical Si nanocrystal models. Measurement of sedimentation velocity in several solvents with different densities presents a way to circumvent the ambiguity of simultaneous fitting of particle density and sedimentation coefficient and allows us to significantly reduce the uncertainty in the estimates of particle hydrodynamic diameter by finding the effective particle density value.

Electronic durability of flexible transparent films from type-specific single-wall carbon nanotubes

The coupling between mechanical flexibility and electronic performance is evaluated for thin films of metallic and semiconducting single-wall carbon nanotubes (SWCNTs) deposited on compliant supports. Percolated networks of type-purified SWCNTs are assembled as thin conducting coatings on elastic polymer substrates, and the sheet resistance is measured as a function of compression and cyclic strain through impedance spectroscopy. The wrinkling topography, microstructure and transparency of the films are independently characterized using optical microscopy, electron microscopy, and optical absorption spectroscopy. Thin films made from metallic SWCNTs show better durability as flexible transparent conductive coatings, which we attribute to a combination of superior mechanical performance and higher interfacial conductivity.

Separation of empty and water-filled single-wall carbon nanotubes

The separation of empty and water-filled laser ablation and electric arc synthesized nanotubes is reported. Centrifugation of these large-diameter nanotubes dispersed with sodium deoxycholate using specific conditions produces isolated bands of empty and water-filled nanotubes without significant diameter selection. This separation is shown to be consistent across multiple nanotube populations dispersed from different source soots. Detailed spectroscopic characterization of the resulting empty and filled fractions reveals that water filling leads to systematic changes to the optical and vibrational properties. Furthermore, sequential separation of the resolved fractions using cosurfactants and density gradient ultracentrifugation reveals that water filling strongly influences the optimal conditions for metallic and semiconducting separation.

Chromatographic Separation of Single Wall Carbon Nanotubes

Size exclusion chromatography (SEC) has been used to separate single wall carbon nanotubes (SWNT) dispersed by chemical modification in organic solvents and by DNA in aqueous solution. The chromatographic detection includes size sensitive detectors, multi-angle light scattering (MALS) and intrinsic viscosity (IV), which can provide information on the size and shape of the SEC fractions. The dispersions were also characterized by small angle neutron scattering (SANS) and atomic force microscopy (AFM). Chemical modification was accomplished by covalent attachment of octadecyl amine to acid treated SWNT and by covalent attachment of butyl groups through free radical grafting. Both covalent attachment methods produced dispersions that contained impurities or clusters of SWNT. The DNA dispersions produced the best dispersions, being predominately single nanotubes.