Widespread photosynthesis reaction centre barrel proteins are necessary for haloarchaeal cell division

Cell division is fundamental to all cellular life. Most archaea depend on either the prokaryotic tubulin homologue FtsZ or the endosomal sorting complex required for transport for division but neither system has been robustly characterized. Here, we show that three of the four photosynthesis reaction centre barrel domain proteins of Haloferax volcanii (renamed cell division proteins B1/2/3 (CdpB1/2/3)) play important roles in cell division. CdpB1 interacts directly with the FtsZ membrane anchor SepF and is essential for cell division, whereas deletion of cdpB2 and cdpB3 causes a major and a minor division defect, respectively. Orthologues of CdpB proteins are also involved in cell division in other haloarchaea, indicating a conserved function of these proteins. Phylogenetic analysis shows that photosynthetic reaction centre barrel proteins are widely distributed among archaea and appear to be central to cell division in most if not all archaea.

Widespread PRC barrel proteins play critical roles in archaeal cell division

Cell division is fundamental to all cellular life. Most of the archaea employ one of two alternative division machineries, one centered around the prokaryotic tubulin homolog FtsZ and the other around the endosomal sorting complex required for transport (ESCRT). However, neither of these mechanisms has been thoroughly characterized in archaea. Here, we show that three of the four PRC (Photosynthetic Reaction Center) barrel domain proteins of Haloferax volcanii (renamed Cell division proteins B1/2/3 (CdpB1/2/3)), play important roles in division. CdpB1 interacts directly with the FtsZ membrane anchor SepF and is essential for division, whereas deletion of cdpB2 and cdpB3 causes a major and a minor division defect, respectively. Orthologs of CdpB proteins are also involved in cell division in other haloarchaea. Phylogenetic analysis shows that PRC barrel proteins are widely distributed among archaea, including the highly conserved CdvA protein of the crenarchaeal ESCRT-based division system. Thus, diverse PRC barrel proteins appear to be central to cell division in most if not all archaea. Further study of these proteins is expected to elucidate the division mechanisms in archaea and their evolution.

Genetic analysis of the septal peptidoglycan synthase FtsWI complex supports a conserved activation mechanism for SEDS-bPBP complexes

SEDS family peptidoglycan (PG) glycosyltransferases, RodA and FtsW, require their cognate transpeptidases PBP2 and FtsI (class B penicillin binding proteins) to synthesize PG along the cell cylinder and at the septum, respectively. The activities of these SEDS-bPBPs complexes are tightly regulated to ensure proper cell elongation and division. In Escherichia coli FtsN switches FtsA and FtsQLB to the active forms that synergize to stimulate FtsWI, but the exact mechanism is not well understood. Previously, we isolated an activation mutation in ftsW (M269I) that allows cell division with reduced FtsN function. To try to understand the basis for activation we isolated additional substitutions at this position and found that only the original substitution produced an active mutant whereas drastic changes resulted in an inactive mutant. In another approach we isolated suppressors of an inactive FtsL mutant and obtained FtsW^E289G and FtsI^K211I and found they bypassed FtsN. Epistatic analysis of these mutations and others confirmed that the FtsN-triggered activation signal goes from FtsQLB to FtsI to FtsW. Mapping these mutations, as well as others affecting the activity of FtsWI, on the RodA-PBP2 structure revealed they are located at the interaction interface between the extracellular loop 4 (ECL4) of FtsW and the pedestal domain of FtsI (PBP3). This supports a model in which the interaction between the ECL4 of SEDS proteins and the pedestal domain of their cognate bPBPs plays a critical role in the activation mechanism.

Bacterial cell division requires the synthesis of septal peptidoglycan by the widely conserved SEDS-bPBP protein complex FtsWI, but how the complex is activated during cell division is still poorly understood. Previous studies suggested that FtsN initiates a signaling cascade in the periplasm to activate FtsWI. Here we isolated and characterized activated FtsW and FtsI mutants and confirmed that the signaling cascade for FtsW activation goes from FtsN to FtsQLB to FtsI and then to FtsW. The residues corresponding to mutations affecting FtsWI activation are clustered to a small region of the interaction interface between the pedestal domain of FtsI and the extracellular loop 4 of FtsW, suggesting that this interaction mediates activation of FtsW. This is strikingly similar to the proposed activation mechanism for the RodA-PBP2 complex, another SEDS-bPBP complex required for cell elongation. Thus, the two homologous SEDS-bPBP complexes are activated similarly by completely unrelated activators that modulate the interaction interface between the SEDS proteins and the bPBPs.

Roles of FtsEX in cell division

FtsEX is a member of a small subclass of ABC transporters that uses mechano-transmission to perform work in the periplasm. FtsEX controls periplasmic peptidoglycan (PG) hydrolase activities in many Gram negative and positive organisms to ensure the safe separation of daughter cells during division. In these organisms FtsEX localizes to the Z ring and uses its ATPase activity to regulate its periplasmic effectors. In Escherichia coli, FtsEX also participates in building the divisome and coordinates PG synthesis with PG hydrolysis. This review discusses studies that are beginning to elucidate the mechanisms of FtsEX's various roles in cell division.

How FtsEX localizes to the Z ring and interacts with FtsA to regulate cell division

In Escherichia coli, FtsEX, a member of the ABC transporter superfamily, is involved in regulating the assembly and activation of the divisome to couple cell wall synthesis to cell wall hydrolysis at the septum. Genetic studies indicate FtsEX acts on FtsA to begin the recruitment of the downstream division proteins but blocks septal PG synthesis until a signal is received that divisome assembly is complete. However, the details of how FtsEX localizes to the Z ring and how it interacts with FtsA are not clear. Our results show that recruitment of FtsE and FtsX is codependent and suggest that the FtsEX complex is recruited through FtsE interacting with the conserved tail of FtsZ (CCTP), thus adding FtsEX to a growing list of proteins that interacts with the CCTP of FtsZ. Furthermore, we find that the N-terminus of FtsX is not required for FtsEX localization to the Z ring but is required for its functions in cell division indicating that it interacts with FtsA. Taken together, these results suggest that FtsEX first interacts with FtsZ to localize to the Z ring and then interacts with FtsA to promote divisome assembly and regulate septal PG synthesis.

MinC and FtsZ mutant analysis provides insight into MinC/MinD-mediated Z ring disassembly

The Min system negatively regulates the position of the Z ring, which serves as a scaffold for the divisome that mediates bacterial cytokinesis. In Escherichia coli, this system consists of MinC, which antagonizes assembly of the tubulin homologue FtsZ. MinC is recruited to the membrane by MinD and induced by MinE to oscillate between the cell poles. MinC is a dimer with each monomer consisting of functionally distinct MinC^N and MinC^C domains, both of which contact FtsZ. According to one model, MinC^C/MinD binding to the FtsZ tail positions MinC^N at the junction of two GDP-containing subunits in the filament, leading to filament breakage. Others posit that MinC sequesters FtsZ-GDP monomers or that MinC^N caps the minus end of FtsZ polymers and that MinC^C interferes with lateral interactions between FtsZ filaments. Here, we isolated minC mutations that impair MinC^N function and analyzed FtsZ mutants resistant to MinC/MinD. Surprisingly, we found mutations in both minC and ftsZ that differentiate inhibition by MinC from inhibition by MinC/MinD. Analysis of these mutations suggests that inhibition of the Z ring by MinC alone is due to sequestration, whereas inhibition by MinC/MinD is not. In conclusion, our genetic and biochemical data support the model that MinC/MinD fragments FtsZ filaments.

Simultaneous direct holographic fabrication of photonic cavity and graded photonic lattice with dual periodicity, dual basis, and dual symmetry

For the first time, to the authors' best knowledge, this paper demonstrates the digital, holographic fabrication of graded, super-basis photonic lattices with dual periodicity, dual basis, and dual symmetry. Pixel-by-pixel phase engineering of the laser beam generates the highest resolution in a programmable spatial light modulator (SLM) for the direct imaging of graded photonic super-lattices. This technique grants flexibility in designing 2-D lattices with size-graded features, differing periodicities, and differing symmetries, as well as lattices having simultaneously two periodicities and two symmetries in high resolutions. By tuning the diffraction efficiency ratio from the SLM, photonic cavities can also be generated in the graded super-lattice simultaneously through a one-exposure process. A high quality factor of over 1.56 × 10⁶ for a cavity mode in the graded photonic lattice with a large super-cell is predicted by simulations.

Assembly and activation of the Escherichia coli divisome

Cell division in Escherichia coli is mediated by a large protein complex called the divisome. Most of the divisome proteins have been identified, but how they assemble onto the Z ring scaffold to form the divisome and work together to synthesize the septum is not well understood. In this review, we summarize the latest findings on divisome assembly and activation as well as provide our perspective on how these two processes might be regulated.

The N-succinyl-l,l-diaminopimelic acid desuccinylase DapE acts through ZapB to promote septum formation in Escherichia coli

Spatial regulation of cell division in Escherichia coli occurs at the stage of Z ring formation. It consists of negative (the Min and NO systems) and positive (Ter signal mediated by MatP/ZapA/ZapB) regulators. Here, we find that N-succinyl-L,L-diaminopimelic acid desuccinylase (DapE) facilitates functional Z ring formation by strengthening the Ter signal via ZapB. DapE depends on ZapB to localize to the Z ring and its overproduction suppresses the division defect caused by loss of both the Min and NO systems. DapE shows a strong interaction with ZapB and requires the presence of ZapB to exert its function in division. Consistent with the idea that DapE strengthens the Ter signal, overproduction of DapE supports cell division with reduced FtsZ levels and provides some resistance to the FtsZ inhibitors MinCD and SulA, while deletion of dapE, like deletion of zapB, exacerbates the phenotypes of cells impaired in Z ring formation such as ftsZ84 or a min mutant. Taken together, our results report DapE as a new component of the divisome that promotes the integrity of the Z ring by acting through ZapB and raises the possibility of the existence of additional divisome proteins that also function in other cellular processes.

E. coli Cell Cycle Machinery

Cytokinesis in E. coli is organized by a cytoskeletal element designated the Z ring. The Z ring is formed at midcell by the coalescence of FtsZ filaments tethered to the membrane by interaction of FtsZ's conserved C-terminal peptide (CCTP) with two membrane-associated proteins, FtsA and ZipA. Although interaction between an FtsZ monomer and either of these proteins is of low affinity, high affinity is achieved through avidity - polymerization linked CCTPs interacting with the membrane tethers. The placement of the Z ring at midcell is ensured by antagonists of FtsZ polymerization that are positioned within the cell and target FtsZ filaments through the CCTP. The placement of the ring is reinforced by a protein network that extends from the terminus (Ter) region of the chromosome to the Z ring. Once the Z ring is established, additional proteins are recruited through interaction with FtsA, to form the divisome. The assembled divisome is then activated by FtsN to carry out septal peptidoglycan synthesis, with a dynamic Z ring serving as a guide for septum formation. As the septum forms, the cell wall is split by spatially regulated hydrolases and the outer membrane invaginates in step with the aid of a transenvelope complex to yield progeny cells.

MinC/MinD copolymers are not required for Min function

In Escherichia coli, precise placement of the cytokinetic Z ring at midcell requires the concerted action of the three Min proteins. MinD activates MinC, an inhibitor of FtsZ, at least in part, by recruiting it to the membrane and targeting it to the Z ring, while MinE stimulates the MinD ATPase inducing an oscillation that directs MinC/MinD activity away from midcell. Recently, MinC and MinD were shown to form copolymers of alternating dimers of MinC and MinD, and it was suggested that these copolymers are the active form of MinC/MinD. Here, we use MinD mutants defective in binding MinC to generate heterodimers with wild-type MinD that are unable to form MinC/MinD copolymers. Similarly, MinC mutants defective in binding to MinD were used to generate heterodimers with wild-type MinC that are unable to form copolymers. Such heterodimers are active and in the case of MinC were shown to mediate spatial regulation of the Z ring demonstrating that MinC/MinD copolymer formation is not required. Our results are consistent with a model in which a membrane anchored MinC/MinD complex is targeted to the Z ring through the conserved carboxy tail of FtsZ leading to breakage of FtsZ filaments.

The bypass of ZipA by overexpression of FtsN requires a previously unknown conserved FtsN motif essential for FtsA-FtsN interaction supporting a model in which FtsA monomers recruit late cell division proteins to the Z ring

Assembly of the divisome in Escherichia coli occurs in two temporally distinct steps. First, FtsZ filaments attached to the membrane through interaction with FtsA and ZipA coalesce into a Z ring at midcell. Then, additional proteins are recruited to the Z ring in a hierarchical manner to form a complete divisome, activated by the arrival of FtsN. Recently, we proposed that the interaction of FtsA with itself competes with its ability to recruit downstream division proteins (both require the IC domain of FtsA) and ZipA's essential function is to promote the formation of FtsA monomers. Here, we tested whether overexpression of a downstream division protein could make ZipA dispensable, presumably by shifting the FtsA equilibrium to monomers. Only overexpression of FtsN bypassed ZipA and a conserved motif in the cytoplasmic domain of FtsN was required for both the bypass and interaction with FtsA. Also, this cytoplasmic motif had to be linked to the periplasmic E domain of FtsN to bypass ZipA, indicating that linkage of FtsA to periplasmic components of the divisome through FtsN was essential under these conditions. These results are used to further elaborate our model for the role of FtsA in recruiting downstream division proteins.

Oligomerization of FtsZ converts the FtsZ tail motif (conserved carboxy-terminal peptide) into a multivalent ligand with high avidity for partners ZipA and SlmA

A short conserved motif located at the carboxy terminus of FtsZ, referred to here as the CCTP (conserved carboxy-terminal peptide), is required for the interaction of FtsZ with many of its partners. In Escherichia coli interaction of FtsZ with its membrane anchors, ZipA and FtsA, as well as the spatial regulators of Z-ring formation, MinC and SlmA, requires the CCTP. ZipA interacts with FtsZ with high affinity and interacts with the CCTP with low affinity, but the reason for this difference is not clear. In this study, we show that this difference is due to the oligomerization of FtsZ converting the CCTP to a multivalent ligand that binds multiple ZipAs bound to a surface with high avidity. Artificial dimerization of the CCTP is sufficient to increase the affinity for ZipA in vitro. Similar principles apply to the interaction of FtsZ with SlmA. Although done in vitro, these results have implications for the recruitment of FtsZ to the membrane in vivo, the interaction of FtsZ with spatial regulators and the reconstitution of FtsZ systems in vitro.

Holographic fabrication of 3D photonic crystals through interference of multi-beams with 4 + 1, 5 + 1 and 6 + 1 configurations

In this paper, we are able to fabricate 3D photonic crystals or quasi-crystals through single beam and single optical element based holographic lithography. The reflective optical elements are used to generate multiple side beams with s-polarization and one central beam with circular polarization which in turn are used for interference based holographic lithography without the need of any other bulk optics. These optical elements have been used to fabricate 3D photonic crystals with 4, 5 or 6-fold symmetry. A good agreement has been observed between fabricated holographic structures and simulated interference patterns.

SlmA antagonism of FtsZ assembly employs a two-pronged mechanism like MinCD

Assembly of the Z-ring over unsegregated nucleoids is prevented by a process called nucleoid occlusion (NO), which in Escherichia coli is partially mediated by SlmA. SlmA is a Z ring antagonist that is spatially regulated and activated by binding to specific DNA sequences (SlmA binding sites, SBSs) more abundant in the origin proximal region of the chromosome. However, the mechanism by which SBS bound SlmA (activated form) antagonizes Z ring assembly is controversial. Here, we report the isolation and characterization of two FtsZ mutants, FtsZ-K190V and FtsZ-D86N that confer resistance to activated SlmA. In trying to understand the basis of resistance of these mutants, we confirmed that activated SlmA antagonizes FtsZ polymerization and determined these mutants were resistant, even though they still bind SlmA. Investigation of SlmA binding to FtsZ revealed activated SlmA binds to the conserved C-terminal tail of FtsZ and that the ability of activated SlmA to antagonize FtsZ assembly required the presence of the tail. Together, these results lead to a model in which SlmA binding to an SBS is activated to bind the tail of FtsZ resulting in further interaction with FtsZ leading to depolymerization of FtsZ polymers. This model is strikingly similar to the model for the inhibitory mechanism of the spatial inhibitor MinCD.

Bacteria divide in the middle of the cell by spatially regulating the position of the Z ring, a cytoskeletal element required for cytokinesis. In the model organisms, Escherichia coli and Bacillus subtilis, two negative regulatory systems contribute to this spatial regulation. Both systems contain antagonists of FtsZ assembly that are localized in the cell. In this study we isolated FtsZ mutants resistant to SlmA, which is positioned within the cell by binding to sites asymmetrically distributed around the chromosome. We confirm that SlmA is activated by DNA binding to antagonize FtsZ polymerization in vitro and that the newly isolated mutants are resistant. We also show that SlmA binds to the very conserved tail of FtsZ and that this is required to antagonize FtsZ assembly even though the tail is not required for polymerization. Together, these results highlight the importance of the tail of FtsZ and lead to a model in which SlmA binding to the tail of FtsZ results in further interactions that break the filament. This mechanism is shared with the other spatial regulator and raises the possibility that it may be a common mechanism among spatial regulators of Z ring assembly.

Digitally tunable holographic lithography using a spatial light modulator as a programmable phase mask

In this paper, we study tunable holographic lithography using an electrically addressable spatial light modulator as a programmable phase mask. We control the phases of interfering beams diffracted from the phase pattern displayed in the spatial light modulator. We present a calculation method for the assignment of phases in the laser beams and validate the phases of the interfering beams in phase-sensitive, dual-lattice, and two-dimensional patterns formed by a rotationally non-symmetrical configuration. A good agreement has been observed between fabricated holographic structures and simulated interference patterns. The presented method can potentially help design a gradient phase mask for the fabrication of graded photonic crystals or metamaterials.

Bacterial cytokinesis: From Z ring to divisome

Ancestral homologues of the major eukaryotic cytoskeletal families, tubulin and actin, play critical roles in cytokinesis of bacterial cells. FtsZ is the ancestral homologue of tubulin and assembles into the Z ring that determines the division plane. FtsA, a member of the actin family, is involved in coordinating cell wall synthesis during cytokinesis. FtsA assists in the formation of the Z ring and also has a critical role in recruiting downstream division proteins to the Z ring to generate the divisome that divides the cell. Spatial regulation of cytokinesis occurs at the stage of Z ring assembly and regulation of cell size occurs at this stage or during Z ring maturation.

MipZ: one for the pole, two for the DNA

In this issue of Molecular Cell,Kiekebusch et al. (2012) show that a novel regulatory mechanism of the ATPase cycle of MipZ, together with nonspecific DNA binding, generates the MipZ gradient that spatially regulates Z ring formation in Caulobacter crescentus.

Mechanism of the asymmetric activation of the MinD ATPase by MinE

MinD is a component of the Min system involved in the spatial regulation of cell division. It is an ATPase in the MinD/ParA/Mrp deviant Walker A motif family which is within the P loop GTPase superfamily. Its ATPase activity is stimulated by MinE; however, the mechanism of this activation is unclear. MinD forms a symmetric dimer with two binding sites for MinE; however, a recent model suggested that MinE occupying one site was sufficient for ATP hydrolysis. By generating heterodimers with one binding site for MinE we show that one binding site is sufficient for stimulation of the MinD ATPase. Furthermore, comparison of structures of MinD and related proteins led us to examine the role of N45 in the switch I region. An asparagine at this position is conserved in four of the deviant Walker A motif subfamilies (MinD, chromosomal ParAs, Get3 and FleN) and we find that N45 in MinD is essential for MinE-stimulated ATPase activity and suggest that it is a key residue affected by MinE binding.

The ParA/MinD family puts things in their place

Bacteria must segregate their DNA and position a septum to grow and divide. In many bacteria, MinD is involved in spatial regulation of the cytokinetic Z ring, and ParAs are involved in chromosome and plasmid segregation. The use of the MinD/ParA family to provide positional information for spatial organization continues to expand with the recognition that orphan ParAs are required for segregating cytoplasmic protein clusters and the polar localization of chemotaxis proteins, conjugative transfer machinery, type IV pili, and cellulose synthesis. Also, some bacteria lacking MinD use orphan ParAs to regulate cell division. Positioning of MinD/ParA proteins is either due to self-organization on a surface or reliance on a landmark protein that functions as a molecular beacon.

FtsA mutants impaired for self-interaction bypass ZipA suggesting a model in which FtsA's self-interaction competes with its ability to recruit downstream division proteins

Z-ring assembly requires polymers of the tubulin homologue FtsZ to be tethered to the membrane. Although either ZipA or FtsA is sufficient to do this, both of these are required for recruitment of downstream proteins to form a functional cytokinetic ring. Gain of function mutations in ftsA, such as ftsA* (ftsA-R286W), bypass the requirement for ZipA suggesting that this atypical, well-conserved, actin homologue has a more critical role in Z-ring function. FtsA forms multimers both in vitro and in vivo, but little is known about the role of FtsA polymerization. In this study we identify FtsA mutants impaired for self-interaction. Such mutants are able to support Z-ring assembly and are also able to bypass the requirement for ZipA. These mutants, including FtsA*, have reduced ability to self-interact but interact normally with FtsZ and are less toxic if overexpressed. These results do not support a model in which FtsA monomers antagonize FtsZ polymers. Instead, we propose a new model in which FtsA self-interaction competes with its ability to recruit downstream proteins. In this model FtsA self-interaction at the Z ring is antagonized by ZipA, allowing unpolymerized FtsA to recruit downstream proteins such as FtsN.

The Min oscillator uses MinD-dependent conformational changes in MinE to spatially regulate cytokinesis

In E. coli, MinD recruits MinE to the membrane, leading to a coupled oscillation required for spatial regulation of the cytokinetic Z ring. How these proteins interact, however, is not clear because the MinD-binding regions of MinE are sequestered within a six-stranded β sheet and masked by N-terminal helices. minE mutations that restore interaction between some MinD and MinE mutants were isolated. These mutations alter the MinE structure leading to release of the MinD-binding regions and the N-terminal helices that bind the membrane. Crystallization of MinD-MinE complexes revealed a four-stranded β sheet MinE dimer with the released β strands (MinD-binding regions) converted to α helices bound to MinD dimers. These results identify the MinD-dependent conformational changes in MinE that convert it from a latent to an active form and lead to a model of how MinE persists at the MinD-membrane surface.

Determination of the structure of the MinD-ATP complex reveals the orientation of MinD on the membrane and the relative location of the binding sites for MinE and MinC

The three Min proteins spatially regulate Z ring positioning in Escherichia coli and are dynamically associated with the membrane. MinD binds to vesicles in the presence of ATP and can recruit MinC or MinE. Biochemical and genetic evidence indicate the binding sites for these two proteins on MinD overlap. Here we solved the structure of a hydrolytic-deficient mutant of MinD truncated for the C-terminal amphipathic helix involved in binding to the membrane. The structure solved in the presence of ATP is a dimer and reveals the face of MinD abutting the membrane. Using a combination of random and extensive site-directed mutagenesis additional residues important for MinE and MinC binding were identified. The location of these residues on the MinD structure confirms that the binding sites overlap and reveals that the binding sites are at the dimer interface and exposed to the cytosol. The location of the binding sites at the dimer interface offers a simple explanation for the ATP dependence of MinC and MinE binding to MinD.

Cross-linking FtsZ polymers into coherent Z rings

A key event in bacterial cytokinesis is the formation of the Z ring, which serves as a mechanical scaffold that recruits other cytokinetic proteins to establish functional divisomes. This scaffolding function of Z rings is essential throughout cytokinesis, but the underlying molecular interactions are poorly understood. Here we report that a widely conserved FtsZ binding protein, ZapA, has cytological, biochemical and biophysical properties that argue for the importance of cross-linking interactions between FtsZ polymers in the coherence of Z rings. Escherichia coli zapA null mutant cells have Z rings that are structurally looser and many helical precursors of Z rings fail to coalesce into coherent rings. Biophysical behaviour of FtsZ in the presence of ZapA reveals that ZapA not only bundles, but also cross-links FtsZ polymers, which makes it the first cross-linking protein of the bacterial cytoskeleton. Cross-linking in vitro occurs at the stoichiometry of FtsZ-ZapA interaction at the Z rings in vivo, where nearly all intracellular ZapA is dynamically associated. ZapA also stabilizes longitudinal bonds between FtsZ monomers since it promotes the polymerization of FtsZ mutants with lesions at the polymerization interface and since it reverses the inhibitory effects of SulA, a known antagonist of FtsZ longitudinal interactions.

Examination of the interaction between FtsZ and MinCN in E. coli suggests how MinC disrupts Z rings

In Escherichia coli the Min system prevents Z ring assembly at cell poles by topologically regulating the division inhibitor MinC. The MinC protein has two domains of equal size and both domains can target FtsZ and block cell division in the proper context. Recently, we have shown that, along with MinD, the C-terminal domain of MinC (MinC(C)) competes with FtsA, and to a lesser extent with ZipA, for interaction with the C-terminal tail of FtsZ to block division. Here we explored the interaction between the N-terminal domain of MinC (MinC(N)) and FtsZ. A search for mutations in ftsZ that confer resistance to MinC(N) identified an alpha-helix at the interface of FtsZ subunits as being critical for the activity of MinC(N). Focusing on one such mutant FtsZ-N280D, we showed that it greatly reduced the FtsZ-MinC interaction and was resistant to MinC(N) both in vivo and in vitro. With these results, an updated model for the action of MinC on FtsZ is proposed: MinC interacts with FtsZ to disrupt two interactions, FtsZ-FtsA/ZipA and FtsZ-FtsZ, both of which are essential for Z ring formation.

The conserved C-terminal tail of FtsZ is required for the septal localization and division inhibitory activity of MinC(C)/MinD

The Escherichia coli Min system contributes to spatial regulation of cytokinesis by preventing assembly of the Z ring away from midcell. MinC is a cell division inhibitor whose activity is spatially regulated by MinD and MinE. MinC has two functional domains of similar size, both of which have division inhibitory activity in the proper context. However, the molecular mechanism of the inhibitory action of either domain is not very clear. Here, we report that the septal localization and division inhibitory activity of MinC(C)/MinD requires the conserved C-terminal tail of FtsZ. This tail also mediates interaction with two essential division proteins, ZipA and FtsA, to link FtsZ polymers to the membrane. Overproduction of MinC(C)/MinD displaces FtsA from the Z ring and eventually disrupts the Z ring, probably because it also displaces ZipA. These results support a model for the division inhibitory action of MinC/MinD. MinC/MinD binds to ZipA and FtsA decorated FtsZ polymers located at the membrane through the MinC(C)/MinD-FtsZ interaction. This binding displaces FtsA and/or ZipA, and more importantly, positions MinC(N) near the FtsZ polymers making it a more effective inhibitor.

Overview of cell shape: cytoskeletons shape bacterial cells

An evolving hypothesis is that bacterial cell shape is determined by cytoskeletal elements that localize peptidoglycan synthetic machineries. In most bacteria FtsZ assembles into the Z ring which recruits the machinery necessary for cytokinesis. Most rod shaped cells require MreB which assembles into cables that run between the poles of the cell and distribute various components of peptidoglycan metabolism along the cell length. Cells with other shapes have additional cytoskeletal elements that either localize synthetic machineries or possibly influence their activity.

Assembly dynamics of the bacterial MinCDE system and spatial regulation of the Z ring

The positioning of a cytoskeletal element that dictates the division plane is a fundamental problem in biology. The assembly and positioning of this cytoskeletal element has to be coordinated with DNA segregation and cell growth to ensure that equal-sized progeny cells are produced, each with a copy of the chromosome. In most prokaryotes, cytokinesis involves positioning a Z ring assembled from FtsZ, the ancestral homologue of tubulin. The position of the Z ring is determined by a gradient of negative regulators of Z-ring assembly. In Escherichia coli, the Min system consists of three proteins that cooperate to position the Z ring through a fascinating oscillation, which inhibits the formation of the Z ring away from midcell. Additional gradients of negative regulators of FtsZ assembly are used by E. coli and other bacteria to achieve spatial control of Z-ring assembly.

Identification of a region of FtsA required for interaction with FtsZ

The assembly of the Z ring is the earliest step in bacterial cell division. In Escherichia coli this assembly requires either FtsA or ZipA which bind to a conserved, C-terminal 17 amino acid motif in FtsZ and to the membrane. The FtsZ-ZipA interaction is well characterized; however, nothing is known about the region of FtsA involved in the interaction with FtsZ even though the FtsA-FtsZ interaction is nearly ubiquitous in Eubacteria. FtsA is proposed to bind to the membrane through its conserved C-terminal amphiphatic helix before efficiently interacting with FtsZ. Based upon this model we designed a genetic screen to identify mutants specifically impaired for the FtsA-FtsZ interaction. The mutants obtained retain the ability to be targeted to the membrane but fail to be recruited to the Z ring or interact with FtsZ in the yeast two-hybrid system. These mutants do not complement an ftsA-depletion strain. Through this approach we have identified a region of FtsA containing some invariant residues which is required for binding to FtsZ. The results support our model that FtsA is targeted to the membrane before it interacts with FtsZ and demonstrates that this interaction plays an essential role in E. coli cell division.

Z ring as executor of bacterial cell division

It has become apparent that bacteria possess ancestors of the major eukaryotic cytoskeletal proteins. FtsZ, the ancestral homologue of tubulin, assembles into a cytoskeletal structure associated with cell division, designated the Z ring. Formation of the Z ring represents a major point of both spatial and temporal regulation of cell division. Here we discuss findings concerning the structure and the formation of the ring as well as its spatial and temporal regulation.

Tethering the Z ring to the membrane through a conserved membrane targeting sequence in FtsA

The cytokinetic Z ring is required for bacterial cell division. It consists of polymers of FtsZ, the bacterial ancestor of eukaryotic tubulin, linked to the cytoplasmic membrane. Formation of a Z ring in Escherichia coli occurs as long as one of two proteins, ZipA or FtsA, is present. Both of these proteins bind FtsZ suggesting that they might function to tether FtsZ filaments to the membrane. Although ZipA has a transmembrane domain and therefore can function as a membrane anchor, interaction of FtsA with the membrane has not been explored. In this study we demonstrate that FtsA, which is structurally related to eukaryotic actin, has a conserved C-terminal amphipathic helix that is essential for FtsA function. It is required to target FtsA to the membrane and subsequently to the Z ring. As FtsA is much more widely conserved in bacteria than ZipA, it is likely that FtsA serves as the principal membrane anchor for the Z ring.

MinC mutants deficient in MinD- and DicB-mediated cell division inhibition due to loss of interaction with MinD, DicB, or a septal component

The min locus encodes a negative regulatory system that limits formation of the cytokinetic Z ring to midcell by preventing its formation near the poles. Of the three Min proteins, MinC is the inhibitor and prevents Z-ring formation by interacting directly with FtsZ. MinD activates MinC by recruiting it to the membrane and conferring a higher affinity on the MinCD complex for a septal component. MinE regulates the cellular location of MinCD by inducing MinD, and thereby MinC, to oscillate between the poles of the cell, resulting in a time-averaged concentration of MinCD on the membrane that is lowest at midcell. MinC can also be activated by the prophage-encoded protein DicB, which targets MinC to the septum without recruiting it first to the membrane. Previous studies have shown that the C-terminal domain of MinC is responsible for the interaction with MinD, DicB, and the septal component. In the present study, we isolated mutations in the C-terminal domain of MinC that affected its interaction with MinD, DicB, and the septal component. Among the mutations isolated, R133A and S134A are specifically deficient in the interaction with MinD, E156A is primarily affected in the interaction with DicB, and R172A is primarily deficient in the interaction with the septum. These mutations differentiate the interactions of MinC with its partners and further support the model of MinCD- and MinC-DicB-mediated cell division inhibition.

Analysis of MinD mutations reveals residues required for MinE stimulation of the MinD ATPase and residues required for MinC interaction

The MinD ATPase is critical to the oscillation of the Min proteins, which limits formation of the Z ring to midcell. In the presence of ATP, MinD binds to the membrane and recruits MinC, forming a complex that can destabilize the cytokinetic Z ring. MinE, which is also recruited to the membrane by MinD, displaces MinC and stimulates the MinD ATPase, resulting in the oscillation of the Min proteins. In this study we have investigated the role of lysine 11, present in the deviant Walker A motif of MinD, and the three residues in helix 7 (E146, S148, and D152) that interact electrostatically with lysine 11. Lysine 11 is required for interaction of MinD with the membrane, MinC, MinE, and itself. In contrast, the three residues in helix 7 that interact with lysine 11 are not required for binding to the membrane or activation of MinC. They are also not required for MinE binding; however, they are required for MinE to stimulate the MinD ATPase. Interestingly, the D152A mutant self-interacts, binds to the membrane, and recruits MinC and MinE in the presence of ADP as well as ATP. This mutant provides evidence that dimerization of MinD is sufficient for MinD to bind the membrane and recruit its partners.

The switch I and II regions of MinD are required for binding and activating MinC

MinD and MinC cooperate to form an efficient inhibitor of Z-ring formation that is spatially regulated by MinE. MinD activates MinC by recruiting it to the membrane and targeting it to a septal component. To better understand this activation, we have isolated loss-of-function mutations in minD and carried out site-directed mutagenesis. Many of these mutations block MinC-MinD interaction; however, they also prevent MinD self-interaction and membrane binding, suggesting that they affect nucleotide interaction or protein folding. Two mutations in the switch I region (MinD box) and one mutation in the switch II region had little affect on most MinD functions, such as MinD self-interaction, membrane binding, and MinE stimulation; however, they did eliminate MinD-MinC interaction. Two additional mutations in the switch II region did not affect MinC binding. Further study revealed that one of these allowed the MinCD complex to target to the septum but was still deficient in blocking division. These results indicate that the switch I and II regions of MinD are required for interaction with MinC but not MinE and that the switch II region has a role in activating MinC.

Another cytoskeleton in the closet

Many eukaryotic cells contain up to three families of cytoskeletal proteins that are responsible for the spatial organization of the cell. Although the prokaryotic origins of the actin and tubulin families have now been established, the origin of the third was unknown. In this issue of Cell, provide evidence that the third family, comprising the intermediate filaments, also has origins in bacteria and is responsible for producing curved cells.

Membrane binding by MinD involves insertion of hydrophobic residues within the C-terminal amphipathic helix into the bilayer

MinD binds to phospholipid vesicles in the presence of ATP and is released by MinE, which stimulates the MinD ATPase. Membrane binding requires a short conserved C-terminal region, which has the potential to form an amphipathic helix. This finding has led to a model in which the binding of ATP regulates the formation or accessibility of this helix, which then embeds in the membrane bilayer. To test this model, we replaced each of the four hydrophobic residues within this potential helix with tryptophan or a charged residue. Introduction of a negatively charged amino acid decreased membrane binding of MinD and its ability to activate MinC. In contrast, mutants with tryptophan substitutions retained the ability to bind to the membrane and activate MinC. Fluorescence emission spectroscopy analysis of the tryptophan mutants F263W, L264W, and L267W confirmed that these tryptophan residues did insert into the hydrophobic interior of the bilayer. We conclude that membrane binding by MinD involves penetration of the hydrophobic residues within the C-terminal amphipathic helix into the hydrophobic interior of the bilayer.

MinD and role of the deviant Walker A motif, dimerization and membrane binding in oscillation

The ATPase activity of MinD is required for it to oscillate between the ends of the cell and spatially regulate cell division in Escherichia coli. It is a member of a functionally diverse subgroup of ATPases which are involved in activities ranging from nitrogen fixation (NifH) to plasmid segregation (ParA). All members of the subgroup have a deviant Walker A motif which contains a conserved 'signature' lysine that characterizes this subgroup. In the NifH homodimer the signature lysines make intermonomer contact with the bound nucleotides indicating a role in ATP hydrolysis. ATP binding to NifH leads to formation of an active dimer that associates with a partner that is also a dimer. Because ATP hydrolysis is coupled to formation of the complex, the complex is only transient. In the presence of ATP MinD binds MinC and goes to the membrane, however, the ATPase is not stimulated and the complex is stable. Subsequent interaction of this complex with MinE, however, leads to ATPase stimulation and release of the Min proteins from the membrane. The sequential interaction of MinD with these two proteins, which is dictated by the membrane, is critical to the oscillatory mechanism involved in spatial regulation of division.

A conserved sequence at the C-terminus of MinD is required for binding to the membrane and targeting MinC to the septum

MinD is a key component of an oscillatory system that spatially regulates cell division in Escherichia coli. It is a peripheral membrane ATPase that recruits MinC and oscillates between the two halves of the cell in a MinE dependent manner. In vitro MinD binds to phospholipid vesicles in an ATP-dependent manner and is released through MinE-stimulated ATP hydrolysis. In this study we examined the function of the conserved C-terminus of MinD. Short truncations of three and ten amino acids dramatically decreased the ability of MinD to localize to the membrane and spatially regulate division. These truncations bound MinC but were deficient in targeting MinC to the septum. In vitro they dimerized, but were deficient in binding to phospholipid vesicles and undergoing MinE stimulation. We suggest a model in which the ATP-dependent dimerization of MinD affects the conformation of the C-terminal region, a potential amphipathic helix, triggering membrane binding.

Recruitment of MinC, an inhibitor of Z-ring formation, to the membrane in Escherichia coli: role of MinD and MinE

In Escherichia coli, the min system prevents division away from midcell through topological regulation of MinC, an inhibitor of Z-ring formation. The topological regulation involves oscillation of MinC between the poles of the cell under the direction of the MinDE oscillator. Since the mechanism of MinC involvement in the oscillation is unknown, we investigated the interaction of MinC with the other Min proteins. We observed that MinD dimerized in the presence of ATP and interacted with MinC. In the presence of a phospholipid bilayer, MinD bound to the bilayer and recruited MinC in an ATP-dependent manner. Addition of MinE to the MinCD-bilayer complex resulted in release of both MinC and MinD. The release of MinC did not require ATP hydrolysis, indicating that MinE could displace MinC from the MinD-bilayer complex. In contrast, MinC was unable to displace MinE bound to the MinD-bilayer complex. These results suggest that MinE induces a conformational change in MinD bound to the bilayer that results in the release of MinC. Also, it is argued that binding of MinD to the membrane activates MinC.

Dynamic proteins in bacteria

Growth of the bacterial cell involves proteins that assemble into dynamic localized structures that are required for cellular morphogenesis and division. During the past year, the continued application of fluorescence microscopy has led to the discovery of novel actin-like filaments involved in cell shape and plasmid DNA segregation, and to new insights into the regulation and dynamics of the Z-ring. Studies on the Min proteins, which rapidly oscillate between the cell poles to spatially regulate Z-ring assembly, has led to a biochemical basis for the oscillation and a suggestion that MinD assembles into dynamic filaments. These studies further demonstrate that the eukaryotic cytoskeleton had its origins in bacteria.

Dynamic assembly of MinD on phospholipid vesicles regulated by ATP and MinE

Selection of the division site in Escherichia coli is regulated by the min system and requires the rapid oscillation of MinD between the two halves of the cell under the control of MinE. In this study we have further investigated the molecular basis for this oscillation by examining the interaction of MinD with phospholipid vesicles. We found that MinD bound to phospholipid vesicles in the presence of ATP and, upon binding, assembled into a well-ordered helical array that deformed the vesicles into tubes. Stimulation of the MinD ATPase by addition of MinE led to disassembly of the tubes and the release of MinD from the vesicles. It is proposed that this MinE-regulated dynamic assembly of MinD underlies MinD oscillation.

Unexpected twist to the Z ring

Development in Bacillus subtilis involves a switch in the location of the cytokinetic Z ring from midcell to the pole. Time lapse photography of an FtsZ-GFP fusion reveals that this switch involves a spiral intermediate and allows identification of the specific sporulation functions involved.

Unique and overlapping roles for ZipA and FtsA in septal ring assembly in Escherichia coli

ZipA and FtsA are essential division proteins in Escherichia coli that are recruited to the division site by interaction with FtsZ. Utilizing a newly isolated temperature-sensitive mutation in zipA we have more fully characterized the role of ZipA. We confirmed that ZipA is not required for Z ring formation; however, we found that ZipA, like FtsA, is required for recruitment of FtsK and therefore all downstream division proteins. In the absence of FtsA or ZipA Z rings formed; however, in the absence of both, new Z rings were unable to form and preformed Z rings were destabilized. Consistent with this, we found that an FtsZ mutant unable to interact with both ZipA and FtsA was unable to assemble into Z rings. These results demonstrate that ZipA and FtsA are both required for recruitment of additional division proteins to the Z ring, but either one is capable of supporting formation and stabilization of Z rings.

Assembly of an FtsZ mutant deficient in GTPase activity has implications for FtsZ assembly and the role of the Z ring in cell division

FtsZ, the ancestral homologue of eukaryotic tubulins, assembles into the Z ring, which is required for cytokinesis in prokaryotic cells. Both FtsZ and tubulin have a GTPase activity associated with polymerization. Interestingly, the ftsZ2 mutant is viable, although the FtsZ2 mutant protein has dramatically reduced GTPase activity due to a glycine-for-aspartic acid substitution within the synergy loop. In this study, we have examined the properties of FtsZ2 and found that the reduced GTPase activity is not enhanced by DEAE-dextran-induced assembly, indicating it has a defective catalytic site. In the absence of DEAE-dextran, FtsZ2 fails to assemble unless supplemented with wild-type FtsZ. FtsZ has to be at or above the critical concentration for copolymerization to occur, indicating that FtsZ is nucleating the copolymers. The copolymers formed are relatively stable and appear to be stabilized by a GTP-cap. These results indicate that FtsZ2 cannot nucleate assembly in vitro, although it must in vivo. Furthermore, the stability of FtsZ-FtsZ2 copolymers argues that FtsZ2 polymers would be stable, suggesting that stable FtsZ polymers are able to support cell division.