Amplified Spontaneous Emission from Electron-Hole Quantum Droplets in Colloidal CdSe Nanoplatelets

Two-dimensional cadmium selenide nanoplatelets (NPLs) exhibit large absorption cross sections and homogeneously broadened band-edge transitions that offer utility in wide-ranging optoelectronic applications. Here, we examine the temperature-dependence of amplified spontaneous emission (ASE) in 4- and 5-monolayer thick NPLs and show that the threshold for close-packed (neat) films decreases with decreasing temperature by a factor of 2-10 relative to ambient temperature owing to extrinsic (trapping) and intrinsic (phonon-derived line width) factors. Interestingly, for pump intensities that exceed the ASE threshold, we find development of intense emission to lower energy in particular provided that the film temperature is ≤200 K. For NPLs diluted in an inert polymer, both biexcitonic ASE and low-energy emission are suppressed, suggesting that described neat-film observables rely upon high chromophore density and rapid, collective processes. Transient emission spectra reveal ultrafast red-shifting with the time of the lower energy emission. Taken together, these findings indicate a previously unreported process of amplified stimulated emission from polyexciton states that is consistent with quantum droplets and constitutes a form of exciton condensate. For studied samples, quantum droplets form provided that roughly 17 meV or less of thermal energy is available, which we hypothesize relates to polyexciton binding energy. Polyexciton ASE can produce pump-fluence-tunable red-shifted ASE even 120 meV lower in energy than biexciton ASE. Our findings convey the importance of biexciton and polyexciton populations in nanoplatelets and show that quantum droplets can exhibit light amplification at significantly lower photon energies than biexcitonic ASE.

Anisotropic Transient Disordering of Colloidal, Two-Dimensional CdSe Nanoplatelets upon Optical Excitation

Nanoplatelets (NPLs)-colloidally synthesized, spatially anisotropic, two-dimensional semiconductor quantum wells-are of intense interest owing to exceptionally narrow transition line widths, coupled with solution processability and bandgap tunability. However, given large surface areas and undercoordinated bonding at facet corners and edges, excitation under sufficient intensities may induce anisotropic structural instabilities that impact desired properties. We employ time-resolved X-ray diffraction to study the crystal structure of CdSe NPLs in response to optical excitation. Photoexcitation induces greater out-of-plane than in-plane disordering in 4 and 5 monolayer (ML) NPLs, while 3 ML NPLs display the opposite behavior. Recovery dynamics suggest that out-of-plane cooling slightly outpaces in-plane cooling in 5 ML NPLs with recrystallization occurring on indistinguishable time scales. In comparison, for zero-dimensional CdSe nanocrystals, disordering is isotropic and recovery is faster. These results favor the use of NPLs in optoelectronic applications, where they are likely to exhibit superior performance over traditional, zero-dimensional nanocrystals.

Determination of antimony and barium in UK air quality samples as indicators of non-exhaust traffic emissions

The aim of this study was to determine concentrations of antimony and barium in air quality samples and assess the potential suitability of these metals as tracer elements for non-exhaust traffic emissions sources. Air quality filters sampled at monitoring sites around the UK for the purposes of the UK Heavy Metals Monitoring Network were subjected to microwave digestion in hydrogen peroxide and nitric acid, then analysed by ICP-MS for a suite of metals including antimony and barium. The average antimony concentration found across all the network sites was 1.84 ng m^-3; the average barium concentration was 6.33 ng m^-3. The range of antimony concentrations observed was 0.13-8.02 ng m^-3; barium concentrations ranged from levels below the detection limit of 0.18 to 39.9 ng m^-3. There are no legislative limits for antimony and barium in ambient air, but the maximum concentrations found are well below the Workplace Exposure Limits specified by the UK Health and Safety Executive. The highest concentrations were found at roadside sites situated to monitor traffic environments, supporting the suitability of antimony and barium to be considered tracer elements for traffic emissions sources. Strong correlations were observed between antimony, barium and copper, indicating they share a common traffic-related source. Based on the strong correlation with copper at urban and traffic locations, indicative annual UK atmospheric emission estimates for antimony and barium in brake and tyre wear were calculated as 6 and 19 tonnes respectively.

Polarized near-infrared intersubband absorptions in CdSe colloidal quantum wells

Colloidal quantum wells are two-dimensional materials grown with atomically-precise thickness that dictates their electronic structure. Although intersubband absorption in epitaxial quantum wells is well-known, analogous observations in non-epitaxial two-dimensional materials are sparse. Here we show that CdSe nanoplatelet quantum wells have narrow (30–200 meV), polarized intersubband absorption features when photoexcited or under applied bias, which can be tuned by thickness across the near-infrared (NIR) spectral window (900–1600 nm) inclusive of important telecommunications wavelengths. By examination of the optical absorption and polarization-resolved measurements, the NIR absorptions are assigned to electron intersubband transitions. Under photoexcitation, the intersubband features display hot carrier and Auger recombination effects similar to excitonic absorptions. Sequenced two-color photoexcitation permits the sub-picosecond modulation of the carrier temperature in such colloidal quantum wells. This work suggests that colloidal quantum wells may be promising building blocks for NIR technologies.

Multiple infrared lasing and detection technologies exploit intersubband transitions of epitaxial quantum wells, but such transitions are mainly limited to the mid-infrared. Here, the authors report narrow, polarized intersubband transitions up to telecom wavelengths in CdSe colloidal quantum wells.

The Son-Rise Program® intervention for autism

With increasing availability of interventions for children with autism, it is important that these are backed by rigorous evaluation data that have high levels of ecological validity. To achieve this, a key prerequisite for any evaluation is to gather data on typical consumers and typical implementation patterns of the intervention. This study collected such data longitudinally in relation to the Son-Rise Program®, a home-based parent-run intervention for autism. Questionnaires and interview data on family demographics, implementation patterns, and perceived treatment fidelity were gathered three times over the course of a year from families who had attended a Son-Rise® initial training course. Although it proved possible to produce a profile of intervention use, findings indicated that the programme is not always implemented as it is typically described in the literature. The study also highlighted methodological challenges likely to be encountered in any future evaluation of this and similar interventions for autism.

Comb wax mediates the acquisition of nest-mate recognition cues in honey bees

Honey bees, Apis mellifera, acquire nest-mate recognition cues from wax, the predominant material used in nest construction. Exposure of a newly emerged worker bee to wax-comb substrate significantly reduced the acceptability of that worker to sister bees. Cues acquired from the comb provided colony-specific information about the identity of worker bees; moreover, the effect of comb exposure has been previously shown to override individually produced cues. Food odors (anise oil), when dissolved in paraffin wax, affected worker-recognition characteristics but food odors did not affect these characteristics when fed to bees in sugar candy. Paraffin wax alone did not affect the recognition cues of bees, showing that the wax can be a neutral medium for the transmission of cues. The wax comb in the colony and the hydrocarbon outer layer of the bee cuticle may be a continuous medium for any hydrocarbon-soluble substances used by honey bees in nest-mate recognition; if so, a mechanism by which environmental cues are acquired by honey bees is provided.

Neural transplantation of human MSC and NT2 cells in the twitcher mouse model

BACKGROUND

Accumulating evidence has demonstrated that the NT2 embryonal carcinoma cell line and multipotential stem cells found in BM, mesenchymal stromal cells (MSC), have the ability to differentiate into a wide variety of cell types. This study was designed to explore the efficacy of these two human stem cell types as a graft source for the treatment of demyelinating disorders such as Krabbe's disease and multiple sclerosis (MS).

METHODS

We examined the engraftment and in vivo differentiation of adult MSC and NT2 cells after transplantation into two demyelinating environments, the neonatal and postnatal twitcher mouse brain.

RESULTS

Both types of xenografts led to anatomical integration, without tumor formation, and remained viable in the normal and twitcher mouse brain, showing differentiation into neurons, astrocytes and oligodendrocytes.

DISCUSSION

This study represents a platform for further stem cell transplantation studies in the twitcher model and potentially has important therapeutic implications.

A numerical approach to resonance frequency analysis for the investigation of oral implant osseointegration

Experimental devices based on vibration testing are employed as non-destructive procedures for evaluating implants osseointegration. Their behaviour was evaluated considering the outcome of numerical analysis. The purpose was to use the finite element method for assessing the ability of frequency analysis in detecting the degree of oral implant osseointegration. A three-dimensional model of a mandible was obtained from tomographic survey. A single implant was considered in canine region. Two configurations were analysed, with and without a mass linked to the implant as a cantilever, reproducing experimental devices. Simulation consisted of analysing the response to impulse forces for different osseointegration levels, thus evaluating the biomechanical efficiency of the implant-bone compound. A good correlation between frequency response and osseointegration level was obtained. This was carried out by providing an impulse excitation of the implant that resulted in a vibration pattern. Within the limit of finite element analysis, the outcomes showed that numerical investigation provides understanding the behaviour of testing devices based on frequency measurements, confirming the potential of vibrations technique as non-invasive analysis for osseointegration process.

The effect of feedback training on lumbosacral compression during simulated occupational lifting

This study measured the effect of a feedback training program on lumbar compression during simulated occupational lifting. Two distinct types of feedback were compared: real-time electromyographic feedback, vs. an acceleration index delivered verbally post-lift. Kinematic data were collected from 28 subjects during symmetrical sagittal plane lifts. Following a baseline session, two feedback training sessions were provided, with a 1-week interval between each session. A control group followed the same protocols, but without receiving feedback training. A post-training session, using protocols identical to the baseline session, was used to assess pre-to-post changes in the dependent variable: peak lumbosacral compression computed using a dynamic linked-segment model. All three groups showed reductions in peak compression from pre-to-post: on average the control group improved by 11.2%, the EMG group by 16.7%, and the acceleration group by 25.3%. The results revealed an interaction between the improvement and the group (p=0.023), and a difference between the improvement in the control group and that in the verbal acceleration feedback group (p<0.01). These reductions in lumbosacral compression persisted after a 7-day interval without feedback training, suggesting that this approach could provide sustained risk-reduction during manual materials handling.

The Son-Rise Program intervention for autism: an investigation into family experiences

BACKGROUND

Despite the increasing involvement of parents as therapists in interventions for their children with autism, research to date has focused almost exclusively on the outcome for the child, and little is known about the effects of involvement on the whole family. This is true even of highly intensive home-based approaches such as the Son-Rise Program (SRP), the focus of the present paper. A longitudinal questionnaire-based study is reported which investigated a number of potential positive and negative effects for the family, how these changed over time, and their relation to child characteristics and patterns of intervention implementation.

METHODS

Questionnaires examining family demographics, patterns of intervention use and perceived family effects were distributed three times over the course of a year to families who had attended an initial training course in the use of the SRP.

RESULTS

The results indicated that, although involvement led to more drawbacks than benefits for the families over time, family stress levels did not rise in all cases. Few relationships were found between family effects and patterns of intervention use, although there was a strong connection with parental perceptions of intervention efficacy.

CONCLUSIONS

The findings of the present study emphasize the need for those supporting families using home-based interventions to consider the needs of the whole family. This may be especially important if there are periods during which the family find the intervention to be less effective. Families embarking on such intensive approaches may also benefit from considering ways in which any disruption to family life can be minimized.

Multimodality radiotherapy and androgen ablation in the treatment of clinically localized prostate cancer: early results in high risk patients

In patients presenting with clinically localized prostate cancer, the risk of biochemical failure increases significantly with higher Gleason scores, prostate specific antigen (PSA) levels, and clinical stages. Current surgical and radiotherapeutic approaches appear to offer limited success in patients with highly adverse prognostic factors. In an attempt to improve on these outcomes, we have combined external beam radiotherapy (EBRT) with a brachytherapy (BT) boost and neo adjuvant and adjuvant androgen ablation in a population at significant risk of biochemical failure. Here we present early biochemical progression data for this approach. From October 1997 to July 1999, 72 men with a serum PSA >or=10 ng/ml or Gleason score >or=7 or clinical stage >or=T2c (AJC/UICC 1992) underwent EBRT followed by palladium-103 BT. All patients underwent 8 months of combined androgen ablation with leuprolide and an oral antiandrogen beginning 3 months prior to initiation of EBRT. Patients were followed by PSA and digital rectal examination (DRE) at 3-month intervals and a chart review on all patients was carried out during July 2001. To allow comparisons to contemporary literature, Kaplan-Meier survival curves were generated utilizing three alternate definitions of biochemical recurrence: PSA >0.2 ng/ml, PSA >1.0 ng/ml, and the American Society for Therapeutic Radiology and Oncology (ASTRO) consensus definition of three consecutive rising PSAs. Our results indicate that when PSA >0.2 ng/ml was used to define biochemical progression, 88% (95% CI 80-97) of patients remained free of disease at 24 months. When PSA >1.0 ng/ml was used, 97% (CI 92-100) of patients remained disease free at 24 months. ASTRO criteria yielded 90% (CI 82-98) recurrence-free survival at 24 months. In conclusion, this very early report indicates that in patients who are at increased risk of biochemical failure, EBRT with a BT boost in conjunction with short-term androgen ablation offers potentially superior biochemical disease-free survival to contemporary alternative approaches in the literature. Clearly, longer follow-up is required to confirm the durability of this approach.

Head injury and alexithymia: implications for family practice care

BACKGROUND

Alexithymia, a deficit in emotional information processing, and a history of head injury have both been found to be related to high rates of psychosomatic illness, substance abuse, depression, and utilization of primary care services. To date, no study has examined the potential comorbidity of alexithymia and head injury in a family practice setting, a necessary step in evaluating the aetiologic role of head injury in the development of alexithymia. The goals of this study are to establish prevalence of head injury and alexithymia in a family practice setting and to evaluate the relation, if present, between the two.

METHODS

Patients (n =135) of a family practice residency facility were screened using the Traumatic Brain Injury Questionnaire and the Toronto Alexithymia Scale-20.

RESULTS

Forty-nine per cent of the participants reported a history of head injury and 18% were alexithymic. Those with a history of head injury had significantly higher scores of alexithymia. Chi-square analysis indicated a relation between head injury and alexithymia.

CONCLUSIONS

The high rates of self-reported history of head injury in family practice settings, particularly in the context of alexithymia, may adversely affect a physician's ability to care for these patients. Increasing physicians' awareness of head injury and the potential mediating role of alexithymia in medical and psychological illness may facilitate effective diagnosis and patient-physician communication.

A finite element stress analysis of the transmandibular implant system

PURPOSE

The aim of this work was a simulation of the onset of osseointegration of the transmandibular implant system in the mandible. This was achieved by imposing joint elements at the implant-bone interface.

MATERIALS AND METHODS

The geometric model was derived from the anatomic measurement of several mandibles by tomographic scanning. The spring constants of the joint elements interposed at the implant-bone interface were varied between 1 N/mm and 10(9) N/mm to represent the conditions leading to osseointegration.

RESULTS

Increasing the value of the spring constant at the joint elements gradually increases the effective stress in an increasing volume of crestal cortical bone. Additionally, a larger volume of crestal cortical bone assumes a higher stress value as the simulation proceeds.

CONCLUSION

This work indicates that considerable changes in stress magnitude and distribution occur in the crestal cortical bone margins as osseointegration is simulated, which may be the necessary stimulus for bone remodeling.

Correcting out-of-plane errors in two-dimensional imaging using nonimage-related information

Two-dimensional imaging with a single camera assumes that the motion occurs in a calibrated plane perpendicular to the camera axis. It is well known that kinematic errors result if the object fails to remain in this plane and that if both the distance to the calibration plane from the camera and the distance out-of-plane are known, an analytical correction for the out-of-plane error can be made. Less well appreciated is that out-of-plane distance can frequently be acquired from other, nonimage-related information. In the two examples given, the mediolateral center of pressure coordinate of the foot measured from a force plate and the measured landing point of a shot put throw were used. In both cases, the resulting out-of-plane correction improved the accuracy of the 2-D kinematic data dramatically. These examples also demonstrate that the use of nonimage-related data can increase the accuracy of kinematic data without an increase in the complexity of the experiment.

Two two-gene macronuclear chromosomes of the hypotrichous ciliates Oxytricha fallax and O. trifallax generated by alternative processing of the 81 locus

We describe the first know macronuclear chromosomes that carry more than one gene in hypotrichous ciliated protozoa. These 4.9- and 2.8-kbp chromosomes each consist almost exclusively of two protein-coding genes, which are conserved and transcribed. The two chromosomes share a common region that consists of a gene that is a member of the family of mitochondrial solute carrier genes (CR-MSC; [Williams and Herrick (1991): Nucleic Acids Res 19:4717-4724]. Each chromosome also carries another gene appended to its common region: The 4.9-kbp chromosome also carries a gene that encodes a protein that is rich in glutamine and charged amino acids and bears regions of heptad repeats characteristic of coiled-coils. Its function is unknown. The second gene of the 2.8 kbp chromosome is a mitochondrial solute carrier gene (LA-MSC); thus, the 2.8-kbp chromosomes consists of two mitochondrial solute carrier paralogs. Phylogenetic analysis indicates that the two genes were duplicated before ciliates diverged from the main eukaryotic lineage and were subsequently juxtaposed. The CR- and LA-MSC genes are each interrupted by three introns. The introns are not in homologous positions, suggesting that they may have originated from multiple group II intron transpositions. These chromosomes and their genes are encoded in the Oxytricha germline by the 81 locus. This locus is alternatively processed to generate a nested set of three macronuclear chromosomes, the 4.9- and 2.8-kbp chromosomes and a third (1.6 kbp) which consists almost exclusively of the shared common gene, CR-MSC. Such alternative processing is common in macronuclear development of O. fallax [Cartinhour and Herrick (1984): Mol Cell Biol 4:931-938]. Possible functions for alternative processing are considered; e.g., it may serve to physically link genes to allow co-regulation or co-replication by a common cis-acting sequence.

PRMT1 is the predominant type I protein arginine methyltransferase in mammalian cells

Type I protein arginine methyltransferases catalyze the formation of asymmetric omega-N(G),N(G)-dimethylarginine residues by transferring methyl groups from S-adenosyl-L-methionine to guanidino groups of arginine residues in a variety of eucaryotic proteins. The predominant type I enzyme activity is found in mammalian cells as a high molecular weight complex (300-400 kDa). In a previous study, this protein arginine methyltransferase activity was identified as an additional activity of 10-formyltetrahydrofolate dehydrogenase (FDH) protein. However, immunodepletion of FDH activity in RAT1 cells and in murine tissue extracts with antibody to FDH does not diminish type I methyltransferase activity toward the methyl-accepting substrates glutathione S-transferase fibrillarin glycine arginine domain fusion protein or heterogeneous nuclear ribonucleoprotein A1. Similarly, immunodepletion with anti-FDH antibody does not remove the endogenous methylating activity for hypomethylated proteins present in extracts from adenosine dialdehyde-treated RAT1 cells. In contrast, anti-PRMT1 antibody can remove PRMT1 activity from RAT1 extracts, murine tissue extracts, and purified rat liver FDH preparations. Tissue extracts from FDH(+/+), FDH(+/-), and FDH(-/-) mice have similar protein arginine methyltransferase activities but high, intermediate, and undetectable FDH activities, respectively. Recombinant glutathione S-transferase-PRMT1, but not purified FDH, can be cross-linked to the methyl-donor substrate S-adenosyl-L-methionine. We conclude that PRMT1 contributes the major type I protein arginine methyltransferase enzyme activity present in mammalian cells and tissues.

Elevated levels of Ca(II) modulate the activity and inhibition of serine proteases: implication in the mechanism of apoptosis

Elevated levels of intracellular Ca(II) are a prominent feature of apoptosis, a natural form of cell death involved in many physiological and pathological processes. Serine proteases play crucial roles in apoptosis and have been implicated in the genomic DNA degradation and the massive protein degradation that occur during apoptosis. In this study, the effects of the elevated level of Ca(II) on the activity and inhibition of serine proteases were examined by spectrophotometric methods. The effects of the elevated levels of Ca(II), Mg(II), K(I), and Na(I) on the activity and inactivation of three representative members of serine proteases were determined. The level of serine protease activity in CEM-C7-14 leukemic cells was also evaluated in the presence and absence of dexamethasone-induced apoptosis, and also in the presence of A23187, a Ca(II)-ionophore. Among the four metal-ions studied, only Ca(II) was found to significantly enhance the activity of mammalian serine proteases. Ca(II) was also found to significantly protect the enzymes from inhibition, while the other three metal-ions showed no significant effect on the inactivation of the enzymes. Compared to the control sample, the enzymic activity was found to be higher during apoptosis, and in the presence of the Ca(II)-ionophore. Results of this study indicate that Ca(II) can significantly enhance the catalytic efficiency of serine proteases during apoptosis.

Identification of the RNA binding domain of T4 RegA protein by structure-based mutagenesis

The T4 translational repressor RegA protein folds into two structural domains, as revealed by the crystal structure (Kang, C.-H. , Chan, R., Berger, I., Lockshin, C., Green, L., Gold, L., and Rich, A. (1995) Science 268, 1170-1173). Domain I of the RegA protein contains a four-stranded beta-sheet and two alpha-helices. Domain II contains a four-stranded beta-sheet and an unusual 3/10 helix. Since beta-sheet residues play a role in a number of protein-RNA interactions, one or both of the beta-sheet regions in RegA protein may be involved in RNA binding. To test this possibility, mutagenesis of residues on both beta-sheets was performed, and the effects on the RNA binding affinities of RegA protein were measured. Additional sites for mutagenesis were selected from molecular modeling of RegA protein. The RNA binding affinities of three purified mutant RegA proteins were evaluated by fluorescence quenching equilibrium binding assays. The activities of the remainder of the mutant proteins were evaluated by quantitative RNA gel mobility shift assays using lysed cell supernatants. The results of this mutagenesis study ruled out the participation of beta-sheet residues. Instead, the RNA binding site was found to be a surface pocket formed by residues on two loops and an alpha-helix. Thus, RegA protein appears to use a unique structural motif in binding RNA, which may be related to its unusual RNA recognition properties.

Determination of molecular masses of proteins in solution: Implementation of an HPLC size exclusion chromatography and laser light scattering service in a core laboratory

Size exclusion chromatography (SEC) coupled with "on-line" laser light scattering (LS), refractive index (RI), and ultraviolet (UV) detection provides an elegant approach to determining the molecular weights of proteins and their complexes in solution. SEC serves solely as a fractionation step to minimize the ambiguity that otherwise can result from the fact that light scattering provides the weight-average molecular weight (MW) of all species in solution. Our goal is to establish realistic expectations for MW determination using LS coupled with SEC, define sample requirements, and identify possible limitations of SEC/LS analysis. Analyses of 14 protein standards that range from 12 to 475 kd suggest that the molecular weights of native proteins may be determined in a single SEC/LS experiment with an accuracy of +/-5%. The MW determination depends only on the downstream LS and RI detectors, and it is independent of elution position. Unusual elution because of nonglobular shape or interaction with the SEC support has no impact on the MW determination by SEC/LS. With the instrument configuration that was used, the optimal amount of protein needed for SEC/LS is about 50 g for proteins with molecular weight greater than 40 kd. However, analyses of ovalbumin and transferrin demonstrate that even 10 g is sufficient to determine the MW with an error of less than +/-6%. Although SEC/LS has some limitations, such as proteins that contain chromophores whose absorption spectrum overlaps that of the emission spectrum of the laser, it represents a fast and robust approach to determining MW and to monitoring protein oligomerization in solution.

Identification of protein-arginine N-methyltransferase as 10-formyltetrahydrofolate dehydrogenase

S-Adenosylmethionine:protein-arginine N-methyltransferase (EC 2.1.1. 23; protein methylase I) transfers the methyl group of S-adenosyl-L-methionine to an arginine residue of a protein substrate. The homogeneous liver protein methylase I was subjected to tryptic digestion followed by reverse phase high performance liquid chromatography (HPLC) separation and either "on-line" mass spectrometric fragmentation or "off-line" Edman sequencing of selected fractions. Data base searching of both the mass spectrometric and Edman sequencing data from several peptides identified the protein methylase as 10-formyltetrahydrofolate dehydrogenase (EC 1.5.1.6; Cook, R. J., Lloyd, R. S., and Wagner, C. (1991) J. Biol. Chem. 266, 4965-4973; Swiss accession number). This identification was confirmed by comparative HPLC tryptic peptide mapping and affinity chromatography of the methylase on the 5-formyltetrahydrofolate-Sepharose affinity gel used to purify the dehydrogenase. The purified rat liver methylase had approximately 33% of the 10-formyltetrahydrofolate dehydrogenase and 36% of the aldehyde dehydrogenase activity as compared with the recombinant dehydrogenase, which also had protein methylase I activity. Polyclonal antibodies against recombinant dehydrogenase reacted with protein methylase I purified either by polyacrylamide gel electrophoresis or 5-formyltetrahydrofolate affinity chromatography. In each instance there was only a single immunoreactive band at a molecular weight of approximately 106,000. Together, these results confirm the co-identity of protein-arginine methyltransferase and 10-formyltetrahydrofolate dehydrogenase.

Uptake and internalization of exogenous apolipoprotein E3 by cultured human central nervous system neurons

Apolipoprotein E (apoE) has been confirmed as a risk factor for late-onset Alzheimer's disease (AD) and is associated with neurofibrillary tangles and senile plaques, the microscopic pathological characteristics of AD. There has been no direct evidence that human central nervous system neurons can take up and internalize exogenous apoE, which may be important in order for apoE to be involved in the development of the disease. This paper demonstrates by immunohistochemistry and confocal microscopy that cultured human brain neurons can take up and internalize exogenous recombinant human apoE3. We confirm that neurons express the low-density lipoprotein receptor-related protein (LRP) but do not express the low-density lipoprotein receptor. We also demonstrate that the LRP mediates the neuronal uptake of apoE.

Use of liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) for routine identification of enzymatically digested proteins separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis

Automated liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) analysis of >100 tryptic digests carried out on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) separated, Coomassie Blue-stained proteins that were prepared by >50 different laboratories demonstrates that a commercial electrospray/quadrupole ion trap mass spectrometer and the tandem mass correlation algorithm developed by Eng et al. (Am. Soc. Mass Spectrom. 1994, 5, 976-989) provide an extremely robust and facile approach to routine protein identification. By requiring a minimum of two significant matches to peptides that would be predicted to be produced by the protease that was used, low pmol levels of proteins can be identified with high confidence while minimizing the probability of identifying the protease itself and/or the ubiquitous contaminant, keratin. Hence, in only 7% of the digests analyzed was keratin identified and in only 5% of the digests analyzed was the protease itself identified. In contrast, 58% of the analyzed samples were identified and, in many instances, multiple proteins were identified in the same sample. Although the median amount of digest analyzed was 6.1 pmol, the limit of sensitivity (as the instrument is configured with a flow rate of 4 microL/min) appears to be at the 500 fmol level. Since one of the primary reasons for not identifying a sample is that its sequence is not yet in the database searched, the utility of an LC MS/MS approach to protein identification will certainly increase in the future as the sequences of more genomes are completed.

Design of prosthetic cantilever bridgework supported by osseointegrated implants using the finite element method

OBJECTIVES

The aim of the present work was to establish a design procedure for fixed metal prostheses supported by osseointegrated implants in order to prevent permanent deformation and hence failure following loading. Previously, the cantilever cross-sectional shape in the buccal lingual plane has been based on clinical experience and subjectivity.

METHODS

This work has relied on the use of linear elastic finite element analysis in order to generate a maximum effective stress at which permanent deformation commences on loading. A number of different cross-sectional shapes were investigated, both of conventional design as well as new innovative possibilities. Both straight and curved cantilever beams 26 mm long were examined.

RESULTS

The design failure chosen was based on a von Mises plastic collapse principle by comparing the calculated effective stresses with the yield stress of the metal in simple tension. It was found that the "L" shaped design was more rigid than other designs for a given mass, while a framework based on an open "I" section offers good possibilities particularly when used as curved shapes.

SIGNIFICANCE

Assuming a failure criterion based on the von Mises principle, then "L" shaped Co/Cr or stainless steel frameworks, typically 26 mm of cantilever span, undergo permanent deformation at end loadings between 130 and 140 N depending on section curvature. Since it is known biting loads can exceed these values, good design is critical if such failures are to be avoided.

Enzymatic cleavage and HPLC peptide mapping of proteins

Detailed procedures are described for successfully digesting reasonably small quantities (i.e., usually > 10 pmol) of proteins with a variety of proteases and for then isolating the resulting peptides by reverse-phase HPLC. Since sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) appears to be the current method of choice for final purification of proteins for structural analysis, special attention is given to carrying out in-gel proteolytic digests on SDS-PAGE-separated proteins that have usually been stained with Coomassie Blue. A compilation of data from nearly 200 "unknown" samples is used to help provide realistic expectations with respect to the results that are likely to be obtained from carrying out in-gel proteolytic digests on large numbers of proteins.

Site-to-site variability of drug concentrations in skeletal muscle

The homogeneity of drug concentrations in skeletal muscle was assessed in eight fatal overdoses. Ten to 30 random samples were taken from leg muscle weighing 1,650 to 7,985 g. For cases involving paracetamol the mean muscle-to-blood ratio ranged from 0.1 to 1.1 (n = 4) for amitriptyline 1.1 to 3.6 (n = 3), and for dothiepin 0.8 to 2.1 (n = 2). The coefficient of variance was large for all drugs, ranging from 10.5 (carbamazepine) to 50 (thioridazine). Skeletal muscle is not homogeneous with respect to drug concentrations in fatal overdose cases. Of 16 instances of drug detection in blood 2 (nortriptyline and promethazine) were not detected in muscle. Muscle-to-blood drug ratios varied significantly among cases, possibly influenced by survival time after drug ingestion. Quantitative interpretations of muscle drug levels present significant difficulties. However, skeletal muscle can be used for qualitative corroboration of blood analyses and is a suitable specimen for drug detection where none other is available.

Investigation of the integration process of dental implants by means of a numerical analysis of dynamic response

OBJECTIVES

The aim of this work was to present a preliminary numerical analysis of the integration process of dental implants using a finite element simulation of the dynamic response following impulse excitation. Assessment of the osseointegration process has been previously examined using a numerical approach by calculating the natural frequency of a cantilever attached to the implant. The methodology adopted in this work allows a direct measurement of the implant response following impulse loading and avoids the addition of a bulky cantilever set-up.

METHODS

The geometric configuration was obtained by averaging the coordinate data from tomographic scans of 14 mandibles. The materials properties were approximated from experimental analysis performed on trabecular and cortical bone tissue. A load was applied to the top of the implant in one direction resulting in an initial displacement. The implant was then freed and allowed to vibrate over approximately 10 cycles. Three fixity conditions were assumed by changing the properties of the surrounding bone ranging from full integration to a poorly integrated implant typical of the situation during bone healing following surgery. The results of the three fixity conditions were compared by calculating the fundamental displacement amplitudes and frequencies of the vibrating impact.

RESULTS

The calculated results indicated that the implant vibrated at a predominant frequency when partially integrated with a displacement principally in the direction of the applied impulse. However, when the implant was fully integrated a more complex vibration pattern ensued, suggesting the superposition of two or more fundamentals.

SIGNIFICANCE

Attention has been paid to the formulation of the numerical model for validation purposes as well as a reliable reference for the optimum interpretation of the experimental data. In this way it was possible to establish a simulation procedure to investigate the response of the tissues surrounding the implant and their properties at different stages of healing. It should be pointed out that the numerical procedures represented a valid preliminary approach to the problem and were capable of indicating a guide to the optimum design of the experimental apparatus for measurement of displacement and frequency in vivo.

Selection on the protein-coding genes of the TBE1 family of transposable elements in the ciliates Oxytricha fallax and O. trifallax

TBE1s are "cut-and-paste" transposable elements found in high copy number in the germline genomes of the ciliates Oxytricha fallax and O. trifallax. TBE1 "family" sequence (sequence of mixed polymerase chain reaction products generated using primers that match roughly half the TBE1s in host whole-cell DNA) was obtained from both host species. Although family sequence autoradiograms represent thousands of different elements, they are as legible as those representing corresponding sequences of a single TBE1, implying that ideal polymorphisms are rare within the genes examined. Nucleotide polymorphisms among TBE1s (indicated by ambiguities in family sequence) are far more common at third than at first or second positions of codons of genes, implying that selection has conserved the amino acid sequences of these genes in the majority of TBE1s. Portions of the transposase gene and another TBE1 gene have been sequenced from 10 individual TBE1s. None of these portions is interrupted by stop codons or frameshifts, and, for both genes, pairwise comparisons of these sequences show that nonsynonymous differences are significantly less common than synonymous differences, again implicating conservative selection Phylogenetic analysis shows that multiple divergent lineages of TBE1s have evolved under this selection within O. fallax. All these results are unexpected for cut-and-paste transposons in eukaryotic hosts: since transposase encoded by intact elements presumably acts in trans, it can duplicate mutant copies (those that do not encode functional transposase) found in the same genome, and thus no selection is expected to maintain the transposase gene. The selection demonstrated here could act at transposition (if functional TBE1s are preferentially transposed) or at the level of the host (if the host's fitness depends on functional TBE1 genes). TBE1-encoded proteins might be responsible for the precise excision of TBE1s that occurs during development of the host somatic nucleus; selection on hosts for uninterrupted somatic genes would then translate into selection for TBE1 protein-coding competence. We suggest a method for distinguishing between these two classes of explanations by finding and analyzing divergent alleles of ancestral transposable element insertions.

Impulse response of a dental implant in bone by numerical analysis

The osseointegration process of titanium dental implants in bone has been simulated previously using natural frequency and impulse excitation. However, the impulse strength was arbitrarily chosen and may not have yielded the correct frequencies and displacements to be compared with those measured in a clinical situation. In this work the range of impulse excitation strengths applied to a dental implant osseointegrated in bone and the corresponding response have been examined using the finite element method. Both conditions of a dental pin only and a dental pin with attached cantilever integrated in the mandible have been examined. The dynamic analysis indicated that the frequency and displacement responses are indeed sensitive to impulse duration and direction but independent of impulse load. The analysis summarizes the proper impulse excitation values for a correct interpretation of clinically measured frequency response data.

Identification of N(G)-methylarginine residues in human heterogeneous RNP protein A1: Phe/Gly-Gly-Gly-Arg-Gly-Gly-Gly/Phe is a preferred recognition motif

Three sites of N(G),N(G)-arginine methylation have been located at residues 205, 217, and 224 in the glycine-rich, COOH-terminal one-third of the HeLa A1 heterogeneous ribonucleoprotein. Together with the previously determined dimethylated arginine at position 193 [Williams et al., (1985) Proc. Natl. Acad. Sci. U.S.A. 82, 5666-5670], it is evident that all four sites fall within a span of sequence between residues 190 and 233 that contains multiple Arg-Gly-(Gly) sequences interspersed with phenylalanine residues. These RGG boxes have been postulated to represent an RNA binding motif [Kiledjian and Dreyfuss (1992) EMBO J. 11, 2655-2664]. Dimethylation of HeLa A1 appears to be quantitative at each of the four positions. Arginines 205 and 224 have been methylated in vitro by a nuclear protein arginine methyltransferase using recombinant (unmethylated) A1 as substrate. This suggests A1 may be an in vivo substrate for this enzyme. Examination of sequences surrounding the sites of methylation in A1 along with a compilation from the literature of sites that have been identified in other nuclear RNA binding proteins suggests a methylase-preferred recognition sequence of Phe/Gly-Gly-Gly-Arg-Gly-Gly-Gly/Phe, with the COOH-terminal flanking glycine being obligatory. Taken together with data in the literature, identification of the sites of A1 arginine methylation strongly suggests a role for this modification in modulating the interaction of A1 with nucleic acids.

Mode shapes of a damaged and repaired tympanic membrane as analysed by the finite element method

This work makes use of recent finite element discretization of the human tympanic membrane where the known anisotropy of the tympanic membrane is implemented by a series of thin beam elements superimposed on thin shell membrane elements. These thin beam elements were introduced in order to simulate the fibre structure of the tympanic membrane. The onset of tympanosclerosis has been modelled as a gradual increase in tympanic membrane density and modulus in the affected area. This increased density results in a fall of 55% of the first natural frequency for only a 16% area of drum sclerosis. Additionally the amplitude response is significantly reduced. Repair of the membrane was simulated by removal of the fibre system from the affected area. Under these circumstances the natural frequencies virtually return to the healthy state but the mode shapes of vibration do not. The repair to the membrane, although not significantly altering frequency values, has resulted in a disruption to the normal mode shape patterns with consequences in the movements conveyed to the stapes and cochlear fluids.

A dynamic and harmonic damped finite element analysis model of stapedotomy

This study was undertaken in an attempt to better understand the mechanics of sound transmission at the footplate following stapedotomy. The insertion of a Teflon (polytetrafluoroethylene) stapes prosthesis introduces new constraints within the reconstructed ossicular chain which have an effect on the normal vibration patterns of the tympanic membrane. In a finite element model of the ear, constraints have been reproduced as a series of spring constants in the incus/prosthesis/footplate interfaces incorporating damping to simulate the impedance of the inner ear. At zero damping, the frequency response at the pseudo stapes footplate exhibit several maxima and minima between 800 Hz and 2.5 Hz. At higher damping values, these maxima and minima become smoothened out with two or three naturals occurring over the same frequency range. Severe ankylosis of a diseased footplate is reproduced by over-damped conditions. The umbo, incus and stapes footplate vibrate in phase with similar frequencies at light damping levels. The movement of the prosthesis at the pseudo-footplate can be large in the out of plane axis of the ossicular chain, unless sufficient support is provided at the reconstructed footplate. Clinically, this would suggest the vein graft interposed between the piston and stapedotomy hole should endow resistance and elasticity to the system.

Crystal structure of the two RNA binding domains of human hnRNP A1 at 1.75 A resolution

Heterogeneous ribonucleoprotein A1 (hnRNP A1) is an abundant eukaryotic nuclear RNA binding protein. A1 is involved in the packaging of pre-mRNA into hnRNP particles, transport of poly A+ mRNA from the nucleus to the cytoplasm and may modulate splice site selection. The crystal structure of A1(RBD1,2) reveals two independently-folded RNA binding domains (RBDs) connected by a flexible linker. Both RBDs are structurally homologous to the U1A(RBD1), and have their RNA binding platforms oriented in an anti-parallel fashion. The anti-parallel arrangement of the A1 RNA binding platforms suggests mechanisms for RNA condensation and ways of bringing together distant RNA sequences for RNA metabolism such as splicing or transport.

Apolipoprotein E uptake and low-density lipoprotein receptor-related protein expression by the NTera2/D1 cell line: a cell culture model of relevance for late-onset Alzheimer's disease

Apolipoprotein E has been shown to be a risk factor for late-onset Alzheimer's disease, with the apolipoprotein epsilon 4 allele conferring the risk. Apolipoprotein E is found in neurofibrillary tangles and senile plaques, the pathological characteristics of Alzheimer's disease. To date there is no direct evidence that human neurons can take up exogenous apolipoprotein E, which is necessary if apolipoprotein E is involved in the formation of neurofibrillary tangles. To examine apolipoprotein E uptake we employed the human NTera2/D1 cell line, which can be induced by retinoic acid to differentiate into postmitotic NTera2-N neurons, which have the characteristics and morphology of human central nervous system neurons. We defined the cell line as genotype apolipoprotein epsilon 3/3 and demonstrated that the cells do not synthesize apolipoprotein E but can take up and internalize exogenous recombinant apolipoprotein E3. We also confirmed the expression of the low-density lipoprotein receptor-related protein, a known receptor for apolipoprotein E. The NTera2/D1 cell line therefore provides a useful human cell model for examining the effects of other apolipoprotein E isoforms with a view to defining intraneuronal interactions of apolipoprotein E.

Internal eliminated sequences interrupting the Oxytricha 81 locus: allelic divergence, conservation, conversions, and possible transposon origins

Internal eliminated sequences (IESs) often interrupt ciliate genes in the silent germline nucleus but are exactly excised and eliminated from the developing somatic nucleus from which genes are then expressed. Some long IESs are transposons, supporting the hypothesis that short IESs are ancient transposon relics. In light of that hypothesis and to explore the evolutionary history of a collection of IESs, we have compared various alleles of a particular locus (the 81 locus) of the ciliated protozoa Oxytricha trifallax and O. fallax. Three short IESs that interrupt two genes of the locus are found in alleles from both species, and thus must be relatively ancient, consistent with the hypothesis that short IESs are transposon relics. In contrast, TBE1 transposon interruptions of the locus are allele-specific and probably the results of recent transpositions. These IESs (and the TBE1s) are precisely excised from the DNA of the developing somatic macronucleus. Each IES interrupts a highly conserved sequence. A few nucleotides at the ends of each IES are also conserved, suggesting that they interact critically with IES excision machinery. However, most IES nucleotide positions have evolved at high rates, showing little or no selective constraint for function. Nonetheless, the length of each IES has been maintained (+/- 3 bp). While one IES is approximately 33 bp long, three other IESs have very similar sizes, approximately 70 bp long. Two IESs are surrounded by direct repeats of the sequence TTCTT. No other sequence similarities were found between any of the four IESs. However, the ends of one IES do match the inverted terminal repeat consensus sequence of the "TA" IESs of Paramecium. Three O. trifallax alleles appear to have been recipients in recent conversion events that could have been provoked by double-strand breaks associated with IES ends subsequent to IES transposition. Our findings support the hypothesis that short IESs evolved from ancient transposons that have lost most of their sequences, except those necessary for precise excision during macronuclear development.

hnRNP A1 binds promiscuously to oligoribonucleotides: utilization of random and homo-oligonucleotides to discriminate sequence from base-specific binding

To understand the range of possible and probable A1 functions in pre-mRNA biogenesis, it is important that we quantify the relative ability (or inability) of A1 to bind high affinity RNA target sequences and/or structures. Using a fluorescence competition assay we have determined apparent binding affinities for a wide range of 20mer oligos containing putative and possible A1 targets including the high affinity 'winner' sequence identified by selection/amplification [Burd,C.G and Dreyfuss,G. (1994) EMBO J. 13, 1197-1204], AUUUA sequences found in 3'-UTRs of labile mRNAs, 5'- and 3'-splice sites and telomeric sequences. With the exception of a 20mer 'winner' sequence, all other 20mers examined bind A1 with a narrow, approximately 10-fold range of affinities extending from 3.2 x 10(6) to 4.2 x 10(7) M(-1). Studies with homo-oligomers suggest this range reflects nucleotide base rather than sequence specificity and hence, it was possible to predict reasonably accurate affinities for all other 20mers examined except for the 'winner', whose unusually high affinity of 4.0 x 10(8) M(-1) results from a unique higher order structure and sequence. Since there is no known physiological role for the 'winner' 20mer sequence, these data suggest A1 generally binds indiscriminately to all available pre-mRNA sequences. Both the large abundance of A1 in vivo and its binding properties are thus consistent with it playing a structural role in pre-mRNA biogenesis.

Purification and characterization of a recombinant hepatitis E protein vaccine candidate by liquid chromatography-mass spectrometry

A protein with a molecular mass of approximately 62.10(3), derived from open reading frame 2 (ORF-2) of the hepatitis E virus (HEV: Burma strain), was expressed in a baculovirus expression vector and purified to homogeneity. The recombinant 62 kDa protein appeared to be a doublet, as determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Tryptic digestion in conjunction with laser desorption mass spectrometry (LD-MS) and sequence analysis of the tryptic peptides indicated that the amino terminus was blocked, although no proteolytic degradation occurred. The determined internal sequences of peptides were in agreement with the predicted ORF-2 protein. Reversed-phase liquid chromatography coupled to electrospray mass spectrometry (LC-MS) resolved the doublet proteins into two major components with molecular masses of 56548.5 and 58161.4. Confirmation of the amino terminus of the molecule by LD-MS post-ion decay enabled us to tentatively assign the carboxyl terminus of each species at residues 540 and 525. Sequencing of the intact protein by automated carboxyl terminal sequencing confirmed that the carboxyl terminus was truncated and that the sequence assignment predicted by LC-MS was correct.

Cyclical deformation behaviour of denture soft lining materials

OBJECTIVES

The purpose of the study was to examine and describe the deformation behaviour of five denture soft lining materials under dynamic cyclic loading over a range of applied forces using apparatus designed to simulate masticatory performance.

METHODS

Five lining materials were tested over 5-min periods using an Instron tensile testing machine that was modified to measure load and strain semi-continuously during cyclic loading.

RESULTS

Strain energy and strain energy densities and moduli values for each material were calculated. The strain energy absorbed at separate times during the cycling period demonstrated the elastic behaviour of the materials over the 5-min simulated chewing cycle.

CONCLUSIONS

All materials demonstrated elastic but not perfectly linearly elastic behaviour over the chosen loading and cycling frequency. Molloplast B absorbed most energy at the lower testing loads and Novus absorbed most energy at the higher loads.

Influence of titanium oxide and titanium peroxy gel on the breakdown of hyaluronan by reactive oxygen species

The molecular events occurring at the interface between titanium and connective tissue were investigated in order to help explain the unique biocompatible properties of titanium implants and their successful osseointegration into bone tissue. In this study the influence of commercially pure titanium and titanium peroxy gels on the breakdown of the connective tissue component and serum derived factor, hyaluronan, by reactive oxygen species (ROS), produced during the insertion of an implant in vivo, was examined. Hyaluronan breakdown was monitored in vitro in the presence of a hydroxyl radical flux, generated in the presence and absence of titanium powder and discs. Parallel studies examined the breakdown of hyaluronan by hydroxyl radicals in the presence of a titanium peroxy gel, prepared by incubation of the titanium powder or discs in concentrated hydrogen peroxide. The hyaluronan degradation products were separated according to their hydrodynamic size by gel exclusion chromatography. Similarly, experiments were also performed examining the degradation of 2-deoxy-D-ribose by a hydroxyl radical flux in order to demonstrate the detrimental potential of the hydroxyl radicals and to provide a measure of the effectiveness of titanium and titanium peroxy gels as scavengers of ROS. Titanium reduced the harmful effects of the hydroxyl radicals on the breakdown of hyaluronan, presumably acting as a scavenger for the reactive species, possibly by absorbing them into its surface oxide layer, which spontaneously forms on the surface. In contrast, the formation of a titanium peroxy gel from the titanium powder or on the surface of titanium discs enhanced breakdown of both the hyaluronan chains and 2-deoxy-D-ribose. The implications of these findings with regards to the biocompatible nature of the titanium and the ability of these implants to successfully osseointegrate are discussed.

Origins of binding specificity of the A1 heterogeneous nuclear ribonucleoprotein

The A1 heterogeneous nuclear ribonucleoprotein (hnRNP) is the best studied of the "core" hnRNP proteins that are tightly associated with heterogeneous nuclear RNA (hnRNA) within eukaryotic nuclei. Previous studies suggested that hnRNP A1 preferentially binds (under nonequilibrium conditions) to the pyrimidine-rich span of sequence at the 3'splice site of most introns [Swanson, M.S., & Dreyfuss, G. (1988) EMBO J. 11, 3519-3529; Buvoli et al. (1990) Nucleic Acids Res. 18, 6595-6600; Ishikawa et al. (1993) Mol. Cell. Biol. 13, 4301-4310]. Recently, Burd and Dreyfuss [(1994) EMBO J. 13, 1197-1204] used selection/amplification from pools of random sequence RNA to uncover an even higher-affinity A1 oligo that contained two copies of a high-affinity consensus sequence, UAGGGU/A. We have extended these studies by using a fluorescence assay to characterize the equilibrium binding properties of A1 to each of these oligonucleotides. By also characterizing the binding of A1 to sequence-randomized control oligonucleotides, we have been able to better evaluate the inherent "sequence-specific" binding properties of A1. Although these studies indicate that under equilibrium conditions A1 cannot specifically recognize the beta-globin, 3'-splice site DNA oligo analogue studied by Buvoli et al. (1990), they confirmed the high-affinity binding to the "winner" 20-mer RNA that was uncovered via selection/amplification and that has the sequence UAUGAUAGGGACUUAGGGUG (Burd & Dreyfuss, 1994). In 0.1 M NaCl, we found that A1 has approximately 100-fold higher affinity for this winner sequence sequence than it does for either a randomized version of this sequence or a 20-mer oligo corresponding to an unrelated beta-globin intron sequence. This winner RNA oligo aggregates in solution to form an apparent dimer that may represent a G-quartet resulting from dimerization of two Hoogsteen base-paired hairpins. On the basis of salt sensitivity studies carried out with various fragments of A1, the ability of A1 to discriminate the winner sequence from its randomized control results primarily from increased ionic interactions with the glycine-rich, COOH terminal domain of A1 that extends from residue 196 to 319. Nonetheless, most of the overall energy of binding for the A1 winner complex results from determinants that are resident within the first 195 residues of A1. The unique ability of the winner sequence (but not its sequence-randomized control) to form a higher-order aggregate, which may correspond to a G-tetrad, appears to facilitate the additional ionic interactions with the COOH terminal domain. Taken together, these data suggest the need to reevaluate possible and probable functions of A1 in vivo.

An experimental technique for determining middle ear impedance

A two-microphone technique was used to determine the middle ear impedance of a live subject. The procedure involved the application of standing wave tube theory and the assumption that the ear canal behaves like an homogeneous cylinder with plane acoustic wave propagation up to a certain frequency--2 kHz for the current analysis. During experimentation the subject lay on a bench with his head braced against a wooden fixture. Acoustic pressures were recorded from the ear canal by the use of a spectrum analyser and probe microphones with flexible tips. Resultant impedance curves show middle ear natural frequencies at 831 Hz and 1,970 Hz with high levels of damping. The reactive impedance curves show the influence of stiffness and ossicular mass on middle ear sound transmission. An advantage of the approach is that using features of the recorded data it is possible to calculate the effective probe tip to eardrum distance required for the calculation of the middle ear impedance. The two-microphone technique appears to be a promising tool for assessing healthy and diseased middle ear function.

"ADAM' or "EVE'?--a toxicological conundrum

The 3,4-methylenedioxy ring-substituted amphetamines, including "ADAM' and "EVE', are currently popular drugs of abuse. Adverse reactions are reported in the clinical literature but few fatal cases are documented and little toxicological data is available to guide those determining the cause or manner of death in such cases. We report two deaths presenting in a similar manner and with similar clinical features. Various body fluid samples were analysed for amphetamines by gas chromatography/mass spectrometry. In one case, amphetamine alone was detected at levels of 1.54 mg/l and 1.47 mg/l in postmortem blood and admission serum, respectively. The other involved several 3,4-methylenedioxy ring-substituted amphetamines, namely MDA, MDMA and MDEA, at levels of 0.25 mg/l, 0.43 mg/l and 0.3 mg/l, respectively in postmortem femoral blood and 0.24 mg/l, 0.55 mg/l and 0.49 mg/l in admission blood. The interpretation of these toxicological results and some novel legal issues are discussed.

Development of a finite element model of the middle ear

A representative finite element model of the healthy ear is developed commencing with a description of the decoupled isotropic tympanic membrane. This model was shown to vibrate in a manner similar to that found both numerically (1, 2) and experimentally (8). The introduction of a fibre system into the membrane matrix significantly altered the modes of vibration. The first mode "remains as a piston like movement as for the isotropic membrane. However, higher modes show a simpler vibration pattern similar to the second mode but with a varying axis of movement and lower amplitudes. The introduction of a malleus and incus does not change the natural frequencies or mode shapes of the membrane for certain support conditions. When constraints are imposed along the ossicular chain by simulation of a cochlear impedance term then significantly altered modes can occur. More recently a revised model of the ear has been developed by the inclusion of the outer ear canal. This discretisation uses geometries extracted from a Nuclear Magnetic resonance scan of a healthy subject and a crude inner ear model using stiffness parameters ultimately fixed through a parameter tuning process. The subsequently tuned model showed behaviour consistent with previous findings and should provide a good basis for subsequent modelling of diseased ears and assessment of the performance of middle ear prostheses.

Wettability of denture soft-lining materials

Data on the wettability of long-term resilient denture base lining materials have previously been obtained by static methods. This study determined the dynamic contact angle of a range of long-term resilient lining materials and the surface free energy properties of these materials. This method was a rapid and convenient method for determining wettability parameters. The equilibrium contact angle revealed the Flexor and Novus materials to be the least wetted with the Molloplast-B material, and CoeSuper-Soft material was wetted similarly to Trevalon material. The contact angle hysteresis indicated that all the soft-lining materials tested would improve denture stability under dislodgment forces. The surface-free energies appeared to be similar for all the soft-lining materials but were significantly lower than that of Trevalon.

Stress in bone adjacent to dental implants

Finite element analysis (FEA) was employed to assess patterns of stress in bone adjacent to an implant after application of loads through an attached distal extension cantilever. Under all loading conditions, the highest stresses occurred at the distal cervical bone margin adjacent to the cantilever. In clinical studies, this is not consistently the site of the greatest bone changes seen radiographically. This suggests that extrapolation of FEA studies to clinical implantology should be approached with caution until further data become available on both mechanical properties of bone and patterns of bone remodelling induced by defined functional stresses in mandible and maxillae.

Structural specificity of substrate for S-adenosylmethionine:protein arginine N-methyltransferases

The enzymatic methylation of polypeptides on the guanidino group of internal arginine residues by S-adenosylmethionine:protein arginine N-methyltransferase (protein methylase I) yields NG-monomethylarginine, NG,NG-dimethylarginine and NG,NG-dimethylarginine. It has commonly been observed that these arginine residues are present in glycine-and-arginine rich motifs. To understand structural features which are essential for serving as the methyl acceptor for protein methylase I, we have investigated substrate capacities of several synthetic oligopeptides whose sequences are homologous and/or analogous to the methyl acceptor region of the naturally occurring arginine-methylated proteins. These studies have led to the following conclusions. (i) The preferred amino-acid sequence of methyl-accepting peptides was shown to be an arginine-containing peptide with glycine in both the N- and C-flanking positions. While a tetrapeptide with such a sequence (residues 106-109 of bovine myelin basic protein) exhibited almost negligible substrate activity, an overlapping hexapeptide was a moderate substrate. (ii) Substitution of the C-flanking glycine in GKGRGL (residues 104-109 of myelin basic protein) with histidine, phenylalanine, lysine or aspartic acid completely abolished the ability of these hexapeptides to serve as substrates. (iii) A heptapeptide with a repeated glycine-arginine motif (GRGRGRG) was an excellent substrate for the enzyme. (iv) A cyclic octapeptide (CGKGRGLC), which was formed by cyclization of GKGRGL by introduction of disulfide bridge to cross-link N- and C-terminus of the hexapeptide, was an even better substrate than the hexapeptide. (v) Upon HPLC amino-acid analysis, all enzymatically methyl-14C-labeled oligopeptides were found to yield predominantly NG-monomethylarginine with a minor fraction of NG,NG-dimethylarginine in certain peptide samples. However, no NG,NG-dimethylarginine formation was detectable. (vi) The recombinant hnRNP protein A1 (residues 1-320) is known to be methylated at arginine-194 by nuclear-protein/histone protein methylase I (Rajpurohit et al. (1994) J. Biol. Chem. 269, 1079-1082). However, the hexapeptide (SSSQRG) which corresponds to residues 189-194 of protein A1 containing the methylatable arginine residue was relatively inert as a substrate. Furthermore, the N-terminal fragment of protein A1 (residues 1-196) generated by controlled trypsin digestion was also completely inactive as a substrate for the enzyme. These results indicate that the remainder of the A1 protein molecule plays an important though not yet understood role in enzymatic methylation of the arginine-194.

Multiple RNA binding domains (RBDs) just don't add up

One of the most common motifs for binding RNA in eukaryotes is the RNA binding domain (RBD) or RNA Recognition Motif (RRM). One of the more intriguing aspects of these proteins is their modular nature. Proteins have been found containing from one to four RRMs. In most instances, these domains have some basal level of non-sequence specific RNA binding affinity. In addition, many also have a higher affinity for a specific structure or sequence of RNA. In the cases of heterogenous nuclear ribonucleoprotein A1 (hnRNP A1), yeast poly-A binding protein and splicing factor U2AF65, the individual free energy of binding of the RBDs for RNA are not strictly additive. By invoking a model in which the amino acids connecting adjoining RBDs are considered to be flexible linkers with an interresidue spacing of about 3.5 A, it is possible to predict the apparent association constants for at least some multi-RBD proteins to single-stranded RNA. We have surveyed the literature and found that individual RBDs are separated by 'linker' sequences of highly variable length. These linkers provide a critical determinant of binding affinity and may modulate cis versus trans binding. A clearer understanding of multi-RBD binding is essential to critically evaluating the role of these proteins in RNA splicing, packaging and transport.

Mutagenesis of the COOH-terminal region of bacteriophage T4 regA protein

The bacteriophage T4 regA protein is a translational repressor that regulates the synthesis of > 12 T4 proteins. Earlier studies demonstrated that photocross-linking of the 122-residue regA protein to (dT)16 occurs at two sites, with the major site occurring at Phe-106. Amino acid substitutions were introduced at Phe-106 to evaluate its role in nucleic acid binding. Binding affinities of mutants F106C, F106V, and F106Y for nonspecific and specific RNA ligands indicated little difference between the Kapp of the mutants and wild type regA protein, for either poly(U) or for a specific gene 44 oligoribonucleotide. Thus, Phe-106 does not contribute measurably to the overall free energy of binding. Partial proteolysis of regA protein was carried out to further probe its domain structure. Chymotryptic cleavage produced a fragment of 11,095 Da that has reduced affinity for poly(U) and that contains the first 93 residues of regA protein. Interestingly, proteolysis of regA protein is reduced in the presence of the specific target, gene 44 RNA. Two deletion mutants, 1-->94 and 1-->109, have also been cloned and purified. The binding affinities of these deletion mutants indicated a 100-1000-fold reduction in their affinities for poly(U). These studies indicate the last 13 amino acids in regA protein make a significant contribution to RNA binding.

A 3-D finite element analysis of the natural frequencies of vibration of a stapes prosthesis replacement reconstruction of the middle ear

In this work, the natural frequencies of vibration of two different stapes prosthesis replacement reconstructions have been analysed using the finite element method. Prosthesis 1 was constructed of fine stainless steel wire and a Teflon base, while prosthesis 2 was made entirely of Teflon. The results have indicated that generally, the first natural frequency of vibration falls as the prostheses become larger and more bulky. However, the fall in the first natural for prosthesis 1 was modest when compared with that of the isolated tympanic membrane. An important variable influencing frequencies and mode of vibration of the reconstruction was the tightness of fit of the prostheses within the remaining ossicular chain. The tightness of fit in this work was modelled as a range of spring constants applied at the stapes pseudo footplate, together with a series of joint elements at the incus tip/prosthesis head for the Teflon implant. When these spring constraints were below approximately 10 N/mm, the reconstruction exhibited normal mode 1 vibration behaviour, but at larger spring values, an abnormal mode 1 became established resembling the normal mode 2 vibration characteristics. The formation of new geometries and surfaces following reconstruction, introduces new constraints between umbo and stapes footplate particularly at the natural/artificial interfaces. These unnatural constraints may inhibit and modify the natural movements normally occurring at the stapes footplate leading to abnormal modes of vibration.