High-Density, Nonvolatile, Flexible Multilevel Organic Memristor Using Multilayered Polymer Semiconductors

Nonvolatile organic memristors have emerged as promising candidates for next-generation electronics, emphasizing the need for vertical device fabrication to attain a high density. Herein, we present a comprehensive investigation of high-performance organic memristors, fabricated in crossbar architecture with PTB7/Al-AlOx-nanocluster/PTB7 embedded between Al electrodes. PTB7 films were fabricated using the Unidirectional Floating Film Transfer Method, enabling independent uniform film fabrication in the Layer-by-Layer (LbL) configuration without disturbing underlying films. We examined the charge transport mechanism of our memristors using the Hubbard model highlighting the role of Al-AlOx-nanoclusters in switching-on the devices, due to the accumulation of bipolarons in the semiconducting layer. By varying the number of LbL films in the device architecture, the resistance of resistive states was systematically altered, enabling the fabrication of novel multilevel memristors. These multilevel devices exhibited excellent performance metrics, including enhanced memory density, high on-off ratio (>108), remarkable memory retention (>105 s), high endurance (87 on-off cycles), and rapid switching (∼100 ns). Furthermore, flexible memristors were fabricated, demonstrating consistent performance even under bending conditions, with a radius of 2.78 mm for >104 bending cycles. This study not only demonstrates the fundamental understanding of charge transport in organic memristors but also introduces novel device architectures with significant implications for high-density flexible applications.

Development of Pneumatic Artificial Rubber Muscle Using Segmented Shape-Memory Polymer Sheets

We have developed a pneumatic artificial rubber muscle using two shape-memory polymer (SMP) sheets. We attached the SMP sheets to a linear pneumatic artificial rubber muscle. Utilizing the large difference in the elastic modulus below and above the glass transition temperature, the shape fixity and shape recovery of SMPs, the bending direction and the initial shape can be changed. In this study, in order to increase the bending motion range, we developed a segmented SMP sheet with embedded electrical heating wires, and evaluated its mechanical properties using bending and tensile tests. Moreover, we attached such sheets to an artificial muscle and evaluated the bending motion. Bending tests showed that segmenting the SMP sheets greatly reduced their bending stiffness. In tensile tests at temperatures below the glass transition temperature, it was found that the artificial muscle with the attached sheet withstood high elongating loads without failure. Attachment of such segmented SMP sheets to an artificial muscle resulted in an increased bending angle. Through isotonic and isometric tests, we showed that the prototype actuator could bend in two directions.

Variable-Sensitivity Force Sensor Based on Structural Modification

Force sensors are used in a wide variety of fields. They require different measurement ranges and sensitivities depending on the operating environment because there is generally a trade-off between measurement range and sensitivity. In this study, we developed a variable-sensitivity, variable-measurement-range force sensor that utilizes structural modification, namely changes in the distance between the force application point and the detection area, and changes in the cross-sectional area. The use of shape-memory materials allows the sensor structure to be easily changed and fixed by controlling the temperature. First, we describe the theory of the proposed sensor. Then, we present prototypes and the experimental methods used to verify the performance of the sensor. We fabricated the prototypes by attaching two strain gauges to two sides of a shape-memory alloy and shape-memory polymer plates. Experiments on the prototypes show that the relationship between the applied force and the detected strain can be changed by bending the plate. This allows the sensitivity and measurement range of the sensor to be changed.

Variable-Stiffness and Deformable Link Using Shape-Memory Material and Jamming Transition Phenomenon

In this study, we developed a variable-stiffness and deformable link using shape-memory material and the jamming transition phenomenon. Above its glass transition temperature (Tg), a shape-memory polymer (SMP) can be deformed by applying a small load. SMPs maintain the deformed shape after they have been cooled below Tg, and they return to their original shape when heated above Tg. The reversible change in the elastic modulus between the glassy and rubbery states of SMPs can be on the order of 100–1000 times. We exploited the characteristics of SMPs to develop robot components with variable stiffness and sensitivity. The jamming transition phenomenon for granular material has been widely used as a method to change the stiffness of robots. This phenomenon is the change from fluid-like to solid-like conditions by removing air from a space containing particles. In this study, we developed a variable-stiffness link by combining the SMP and the jamming transition phenomenon. Moreover, by replacing the SMP with shape-memory alloys (SMAs), whose recovery force and elastic modulus are larger than those of SMPs, we prepared a second prototype with variable stiffness. We evaluated the performance of both prototypes, using the SMP or the SMA, with experiments and confirmed the motion principle of the proposed link (e.g., shape recovery and shape fixity). Moreover, it was confirmed that the stiffness of these links can be changed among four states.

Hybridization of Bogoliubov Quasiparticles between Adjacent CuO_{2} Layers in the Triple-Layer Cuprate Bi_{2}Sr_{2}Ca_{2}Cu_{3}O_{10+δ} Studied by Angle-Resolved Photoemission Spectroscopy

Hybridization of Bogoliubov quasiparticles (BQPs) between the CuO_{2} layers in the triple-layer cuprate high-temperature superconductor Bi_{2}Sr_{2}Cu_{2}Cu_{3}O_{10+δ} is studied by angle-resolved photoemission spectroscopy (ARPES). In the superconducting state, an anticrossing gap opens between the outer- and inner-BQP bands, which we attribute primarily to interlayer single-particle hopping with possible contributions from interlayer Cooper pairing. We find that the d-wave superconducting gap of both BQP bands smoothly develops with momentum without an abrupt jump in contrast to a previous ARPES study. Hybridization between the BQPs also gradually increases in going from the off nodal to the antinodal region, which is explained by the momentum dependence of the interlayer single-particle hopping. As possible mechanisms for the enhancement of the superconducting transition temperature, the hybridization between the BQPs as well as the combination of phonon modes of the triple CuO_{2} layers and spin fluctuations represented by a four-well model are discussed.

Characteristics of Pneumatic Artificial Rubber Muscle Using Two Shape-Memory Polymer Sheets

We have developed a pneumatic artificial rubber muscle having a bending direction that can be changed using two shape-memory polymer (SMP) sheets, the stiffness of which depends on the temperature. In the present study, we attached two SMP sheets with embedded electrical heating wires to both sides of a pneumatic artificial rubber muscle in order to realize multidirectional actuation and evaluated the basic characteristics of the artificial muscle. The actuator is based on the design of a conventional curved-type artificial rubber muscle. Since only a heated SMP sheet becomes soft, the rigid SMP sheet inhibits the extension of the side of the actuator. Therefore, bending motion can be induced when air is supplied to the internal bladder. By controlling the temperature of the SMP sheets, the bending direction of the prototype actuator could be changed. Namely, three kinds of motions, such as two-directional bending and axial extension, became possible. Moreover, we improved the manufacturing method and the structure of the artificial muscle, such as the stitching method and the SMP sheet thickness, and evaluated the characteristics of the two-directional bending and the axial extension motions of the prototype actuator. We also calculated the theoretical values and compared these values with the experimental results. Furthermore, we examined the application of the actuators to a robot hand. Using the two-directional motion of the actuator, the proposed robot hand can grasp either small or large objects. The experimental results conducted using this prototype confirm the feasibility of the newly proposed actuator.

Evaluation of Contact Force between Aneurysm Model and Coil for Embolization of Intracranial Aneurysms

Objective

To ensure safe coil embolization for intracranial aneurysms, it is important to investigate the contact force between the coil and the aneurysm wall. However, it is unclear how the catheter tip position and the diameter of the secondary loop of the coil influence the contact force. In this study, we measured the contact force between a coil and an aneurysm biomodel under different conditions.

Methods

A commercially available coil was inserted through a microcatheter into a silicone rubber aneurysm model at a constant speed (1 mm/s) using an automatic stage, and the contact force between the coil and the aneurysm wall was measured by a force sensor attached on the aneurysm model. The inner diameter of the spherical aneurysm was 5 mm. The effects of varying the position of the catheter tip (near dome, center, near neck) and the diameter of the secondary coil (4.5 mm) were evaluated.

Results

When the catheter tip was inserted more deeply into the aneurysm (especially near the dome), the contact force increased. The contact force also increased as the secondary coil diameter was increased with the catheter tip near and in the center of the dome.

Conclusion

These results suggest that the catheter tip position and the secondary coil diameter affect the contact force. In particular, the contact force should be considered large with the catheter tip near the dome to ensure safe coil deployment.

Development of a stereo dip-coating system for fabrication of tube-shaped blood vessel models

Tube-shaped blood vessel models that mimic their geometries and mechanical properties can deliver reliable and realistic behavioral information such as deformation and rupture during procedures such as insertion of medical devices. Thickness of vessel walls is an important parameter for fabricating the blood vessel models owing to their strong influence on the model behavior, especially during deformation. The dip-coating method is used to fabricate blood vessel models; however, non-uniform wall thicknesses are observed using this method. This study aimed at finding the characteristics of stereo “angular control dip-coating” (ACDC) system to develop a dip-coating system that can produce tubular models with uniformed wall thickness. The system developed here enables an observation of the substrate behavior from two different views. The conditions of dip-coating used in this study produce 1.36–1.82 mm in the maximum and 0.188–0.435 mm in minimum wall thickness and the fabricated walls cover the realistic range of carotid arterial dimensions. The characteristics of the ACDC system indicate that ACDC is effective for fabricating the uniform wall thickness particularly in the strong curved parts.

Socioecological differences in factors associated with inconsistent condom use with female sex workers and casual partners: an observational study of heterosexual men attending an anonymous HIV testing clinic in Singapore

Sexual practices among heterosexual men may differ between female sex workers (FSWs) and casual partners. We surveyed 203 heterosexual men and investigated the attributes associated with inconsistent condom use among them. Lower educational attainment was positively associated with inconsistent condom use with FSWs (adjusted prevalence ratio (aPR) 2.63; P = 0.018) and casual partners (aPR 1.55; P = 0.022), whereas early age of sexual debut (aPR 3.00; P = 0.012) and alcohol use during sex (aPR 7.95; P < 0.001) were positively associated with inconsistent condom use with FSWs. Socioecological factors may explain such differences.

Composition of the microbiota in forestomach fluids and feces of Japanese Black calves with white scours

The objective of this study was to characterize the composition of the forestomach and fecal microbiota in Japanese Black calves with white scours. Forestomach fluid, feces, and peripheral blood were collected from healthy calves ( = 5; age 10 ± 2 d) and scouring calves ( = 5; age 10 ± 1 d) on the day on which white scours occurred. The pH and concentrations of VFA, lactic acid, and ammonia nitrogen (NH-N) of the forestomach fluids were determined. Microbiota composition and gene copy numbers in the forestomach fluid and feces were analyzed by 454 pyrosequencing and quantitative real-time PCR (qPCR), respectively. The cytokine mRNA level in peripheral leukocytes was evaluated by qPCR. The pH of the forestomach fluid of the scouring calves tended to be higher than that of the healthy calves ( = 0.056). No significant difference was detected in the total VFA, lactic acid, or NH-N concentrations in the forestomach fluids of the 2 groups. Firmicutes, Bacteroidetes, and Proteobacteria were the predominant phyla in the forestomach fluid and feces. At the genus level, the relative abundance of in the forestomach fluid was significantly higher in the scouring calves ( < 0.05) and the relative abundance of in the feces was significantly higher than that in the forestomach in the healthy calves ( < 0.05). Furthermore, the bacterial diversity indices of feces were lower in the scouring calves. Quantitative PCR amplification using some of the primer pairs failed in the forestomach fluid and feces in both groups. These results suggested that fermentation in the forestomach may affect the occurrence of white scours, resulting in changes in the composition and diversity of the forestomach fluid and fecal microbiota in Japanese Black calves.

Curved Type Pneumatic Artificial Rubber Muscle Using Shape-Memory Polymer

A novel pneumatic artificial muscle actuator is presented which is based on the design of a conventional curved type pneumatic bellows actuator. By inhibiting the extension of one side with fiber reinforcement, bending motion can be induced when air is supplied to the internal bladder. In this study, we developed a new actuator by replacing the fiber reinforcement with a Shape-Memory Polymer (SMP). The SMP can be deformed above its glass transition temperature (Tg) and maintains a rigid shape after it is cooled below Tg. When next heated above Tg, it returns to its initial shape. When only part of our actuator is warmed above Tg, only that portion of the SMP is soft and can actuate. Therefore, the direction of the motion can be controlled by heating. Moreover, our actuator can be deformed by an external force above Tg and fixed by cooling it below Tg.

Fatigue Properties for Micro-Sized Ni-P Amorphous Alloy Specimens

Fatigue crack propagation tests at different stress ratios of 0.1 and 0.5 have been performed on microsized Ni-P amorphous alloy specimens to investigate the influence of stress ratio in the crack growth properties of microsized materials. The specimens tested were cantileverbeam-type with dimensions of 10 × 12 × 50 νm3 prepared by focused ion beam machining. Notches with a depth of 3 [m were introduced in all specimens. The entire set of fatigue tests as performed using a newly developed fatigue testing machine in air at room temperature. Fine stripes deduced to be striations were observed on the fatigue fracture surface. Careful measurements of the striation spacings were made. Fatigue crack propagation rate, that is striation spacing, is plotted as a function stress intensity factor range. Fatigue crack propagation rate at stress-ratios of 0.1 and 0.5 in microsized Ni-P amorphous alloy specimens are given by da/dN ∼ 1.3 × 10−8 ΔK;1.16 and da/dN ∼ 3.7 × 10−8 ΔK0.5, respectively. At a given ΔK, crack propagation rate at a stress ratio of 0.5 was higher than that at 0.1. It is considered that a decrease in crack propagation rate at stress ratio of 0.1 is due to adecrease in effective stress intensity factor range ΔKeff, by the effect of crack closure.

Fracture Behavior of Micro-Sized Ni-P Amorphous Alloy Specimens

Fracture behavior of micro-sized Ni-P Amorphous alloy specimens has been investigated using a newly developed mechanical testing machine. Specimens with dimensions of 10 × 12 × 50 μm were prepared by focused ion beam machining. Two types of specimens with different crack geometries were prepared. One specimen has a notch with root radius is 0.25 μtm and the other has a fatigue pre-crack. The shapes of the loaddisplacement curves are different for each type of specimen. The fracture strength of the specimens with a notch is higher than that with a fatigue pre-crack and the fracture surfaces of the specimens are also different for each type of specimen. This may be due to the difference in stress concentration at the crack (notch) tip, and indicates that even a notch with a root radius of 0.25 μm is not able to be regarded as a crack for micro-sized specimens. Therefore, the introduction of a fatigue pre-crack is essential for the evaluation of fracture toughness for such micro-sized specimens.

Enhanced superconducting gaps in the trilayer high-temperature Bi2Sr2Ca2Cu3O(10+δ) cuprate superconductor

We report the first observation of the multilayer band splitting in the optimally doped trilayer cuprate Bi2Sr2Ca2Cu3O(10+δ) (Bi2223) by angle-resolved photoemission spectroscopy. The observed energy bands and Fermi surfaces are originated from the outer and inner CuO2 planes (OP and IP). The OP band is overdoped with a large d-wave gap around the node of Δ0∼43  meV while the IP is underdoped with an even large gap of Δ0∼60  meV. These energy gaps are much larger than those for the same doping level of the double-layer cuprates, which leads to the large Tc in Bi2223. We propose possible origins of the large superconducting gaps for the OP and IP: (1) minimal influence of out-of-plane disorder and a proximity effect and (2) interlayer tunneling of Cooper pairs between the OP and IP.

Analysis of binding site for the novel small-molecule TLR4 signal transduction inhibitor TAK-242 and its therapeutic effect on mouse sepsis model

BACKGROUND AND PURPOSE

TAK-242, a novel synthetic small-molecule, suppresses production of multiple cytokines by inhibiting Toll-like receptor (TLR) 4 signalling. In this study, we investigated the target molecule of TAK-242 and examined its therapeutic effect in a mouse sepsis model.

EXPERIMENTAL APPROACH

Binding assay with [(3)H]-TAK-242 and nuclear factor-kappaB reporter assay were used to identify the target molecule and binding site of TAK-242. Bacillus calmette guerin (BCG)-primed mouse sepsis model using live Escherichia coli was used to estimate the efficacy of TAK-242 in sepsis.

KEY RESULTS

TAK-242 strongly bound to TLR4, but binding to TLR2, 3, 5, 9, TLR-related adaptor molecules and MD-2 was either not observed or marginal. Mutational analysis using TLR4 mutants indicated that TAK-242 inhibits TLR4 signalling by binding to Cys747 in the intracellular domain of TLR4. TAK-242 inhibited MyD88-independent pathway as well as MyD88-dependent pathway and its inhibitory effect was largely unaffected by lipopolysaccharide (LPS) concentration and types of TLR4 ligands. TAK-242 had no effect on the LPS-induced conformational change of TLR4-MD-2 and TLR4 homodimerization. In mouse sepsis model, although TAK-242 alone did not affect bacterial counts in blood, if co-administered with ceftazidime it inhibited the increases in serum cytokine levels and improved survival of mice.

CONCLUSIONS AND IMPLICATIONS

TAK-242 suppressed TLR4 signalling by binding directly to a specific amino acid Cys747 in the intracellular domain of TLR4. When co-administered with antibiotics, TAK-242 showed potent therapeutic effects in an E. coli-induced sepsis model using BCG-primed mice. Thus, TAK-242 may be a promising therapeutic agent for sepsis.

Simulation and experimental observation of contact conditions between stents and artery models

Treatment of coronary artery stenosis with percutaneous coronary angioplasty and stenting is sometimes complicated by neointimal hyperplasia, possibly due to interaction of the stent with the arterial wall within a specific contact area. Therefore, we characterized the stress distribution at the contacts between the stent and the artery using mathematical and experimental modeling (an arterial cylinder model with a tube-like structure and an arterial stenosis model, consisting of a tube and plaque portion) and two kinds of link stents with different numbers of cells and links. First, the contact condition was investigated using a finite element method (FEM). Second, experimental visualization of the contact area between the stent and the artery models was performed. Comparison of the experimental results with the FEM analysis revealed that the contact area between the stent (with a high number of cells and links) and the artery model was distributed over the total surface of the stent. Further, values obtained from the experimental distribution and the calculated distribution were similar. These data indicate that experimental modeling and FEM analysis are useful methods for analyzing the relationship between stent structure and stent/wall stress distributions and may help guide the design of new stents.

Efeitos de oxidantes e sais inorgânicos na degradação fotocatalítica do herbicida imazetapir mediada por dióxido de titânio

A degradação fotocatalítica de imazetapir, um herbicida da família das imidazolinonas, em suspensão aquosa de dióxido titânio foi investigada na presença de dois receptores de elétrons como persulfato de potássio e periodato de sódio, assim como na presença de dois sais inorgânicos como sulfato de sódio e dihidrogenofosfato de sódio a 30ºC. O modelo cinético de pseudo-primeira ordem foi empregado para discutir os resultados. O desaparecimento de imazetapir em função do tempo de irradiação foi analisado por cromatografia líquida de alta eficiência. Entre os dois oxidantes estudados a degradação foi mais rápida quando se adicionou o periodato de sódio, enquanto a presença do sulfato de sódio retarda a degradação de imazetapir mais que o dihidrogenofosfato na suspensão de TiO2.

Inhibitory effects of small-molecule CCR5 antagonists on human immunodeficiency virus type 1 envelope-mediated membrane fusion and viral replication

We established a human immunodeficiency virus type 1 (HIV-1) envelope (Env)-mediated membrane fusion assay and examined the small-molecule CCR5 antagonist TAK-779 and its derivatives for their inhibitory effects on HIV-1 Env-mediated membrane fusion and viral replication. The membrane fusion assay is based on HIV-1 long terminal repeat-directed beta-D-galactosidase reporter gene expression in CD4- and CCR5-expressed HeLa (MAGI-CCR5) cells after cocultivation with effector 293T cells expressing HIV-1 Env. Inhibition of HIV-1 replication was also determined in MAGI-CCR5 cells infected with the corresponding cell-free HIV-1. TAK-779 effectively suppressed R5 HIV-1 (strain JR-FL) Env-mediated membrane fusion as well as viral replication. Its 50% inhibitory concentrations (IC(50)s) for membrane fusion and viral replication were 0.87 +/- 0.11 and 1.4 +/- 0.1 nM, respectively. These values corresponded well to the IC(50) for (125)I-RANTES (regulated on activation, T cell expressed, and secreted) binding to CCR5 (1.4 nM). The inhibitory effects of 18 TAK-779 derivatives on membrane fusion differed from one compound to another. However, there was a close correlation among their inhibitory effects on membrane fusion, viral replication, and RANTES binding. The correlation coefficient between their IC(50)s for membrane fusion and viral replication was 0.881. Furthermore, since this assay depends on Env expressed in the effector cells, it is also applicable to the evaluation of CXCR4 antagonists. These results indicate that the HIV-1 Env-mediated membrane fusion assay is a useful tool for the evaluation of entry inhibitors.

Treated natural history of superficial bladder cancer

BACKGROUND

The present study was conducted to examine the natural history of superficial bladder cancer.

METHODS

One hundred and forty-four patients with superficial bladder cancer who had been treated with transurethral resection of bladder tumor (TURBt) alone were analyzed.

RESULTS

The non-recurrence rate was 64.8% at 36 months and 61.2% at 60 months after TURBt. When the non-recurrence rate after TURBt was analyzed by background variables, the rate differed significantly between the solitary tumor group and the multiple tumor group. The tumor recurrence hazard curves for the entire population had one high peak before 500 days and another slight peak around 1500 days after TURBt.

CONCLUSIONS

These results will provide basic information useful when evaluating new regimens of intravesical instillation therapy for prophylaxis of superficial bladder cancer after our complete TURBt in the Nara Uro-Oncology Research Group.

Strain variation in renal carcinogenesis by N-ethyl-N-hydroxyethylnitrosamine in F1 (Wistar-Fischer) rats

The present study was conducted to compare the incidences of renal tumors in Wistar (W), Fischer (F) and F1 rats (WF: female Wistar rats x male Fischer rats; FW: female Fischer rats x male Wistar rats) induced by N-ethyl-N-hydroxyethylnitrosamine (EHEN). Levels of 8-OHdG in renal DNA were also investigated in Wistar and Fischer rats. After 2000 ppm of EHEN was administered orally for 2 weeks, the animals were fed basal diet until week 32. Wistar males and females demonstrated significantly higher sensitivity regarding induction of renal lesions, while both WF and FW rats had similar incidences, generally intermediate between those for the two parent strains. The formation of 8-OHdG was maximal 60-180 min after an intraperitoneal dose of 750 mg/kg to Wistar and Fischer rats, which correlates with the increase tending to the incidence of renal tumors in male and female Wistar and Fischer rats. The results suggest that EHEN induction of renal tumors is related to oxygen radical damage and that the genes in the Wistar strain responsible for the sensitivity are not inherited in a sex-dependent fashion, despite the male being more susceptible.

Experimental study of materials for patch graft on right ventricular outflow tract under extracorporeal circulation in dogs--comparison between Denacol EX-313-treated bovine jugular vein graft and expanded polytetrafluoroethylene (EPTFE) graft

A comparison between a bovine jugular vein treated with a hydrophilic polyepoxy compound cross-linker (Denacol), and expanded polytetrafluoroethylene (EPTFE), an artificial material, as a patch graft for the reconstruction of the right ventricular outflow tract under extracorporeal circulation in dogs, as if they had pulmonic stenosis, was made. Hemodynamic and histological examinations were conducted two weeks after the transplantation. Hemodynamic problems were not observed in either the Denacol or EPTFE groups. Macroscopically, organization of new tissue on the graft surface was more marked in the EPTFE group than in the Denacol group, and newly-formed tissue was seen surrounding the border of the graft and burying it in the EPTFE group. In the Denacol group, microscopic findings revealed the presence of inflammatory cells and fibroblasts, and an invasion of the graft by collagen fibers and elastic fibers. In the EPTFE group, there was minimal cellular infiltration of the graft and a thick layer consisting of collagen fibers and fibroblasts was observed around the graft. These results indicated that two weeks after transplantation the graft was better assimilated and organized with blood vasculature in the patch graft in the Denacol group than in the EPTFE group.

Real-time observation of a single DNA digestion by lambda exonuclease under a fluorescence microscope field

A fluorescence microscopy technique has been developed to visualize the behavior of individual DNA and protein molecules. Real-time direct observation of a single DNA molecule can be used to investigate the dynamics of DNA-protein interactions, such as the DNA digestion reaction by lambda exonuclease. In conventional methods it is impossible to analyze the dynamics of an individual lambda exonuclease molecule on a DNA because they can only observe the average behavior of a number of exonuclease molecules. Observation of a single molecule, on the other hand, can reveal processivity and binding rate of an individual exonuclease molecule. To evaluate the dynamics of lambda exonuclease, a stained lambda DNA molecule with one biotinylated terminal was fixed on an avidin-coated coverslip and straightened using a d.c. electric field. Microscopic observation of digestion of a straightened DNA molecule by lambda exonuclease revealed that the DNA digestion rate was approximately 1000 bases/s and also demonstrated high processivity.

Physiological and pharmacological characteristics of quisqualic acid-induced K(+)-current response in the ganglion cells of Aplysia

The extracellular application of either quisqualic acid (QA) or Phe-Met-Arg-Phe-NH2 (FMRFamide) induces an outward current in identified neurons of Aplysia ganglion under voltage clamp. The time course of the QA-induced response is significantly slower than that induced by FMRFamide. The reversal potential for both responses was -92 mV and was shifted 17 mV in a positive direction for a twofold increase in the extracellular K(+) concentration. The QA-induced response was markedly depressed in the presence of Ba(2+), a blocker of inward rectifier K(+)-channel, whereas TEA, a Ca(2+)-activated K(+)-channel (BK(Ca)) blocker, or 4-AP, a transient K(+) (A)-channel blocker, had no effect on the response. The QA-induced K(+)-current was significantly suppressed by CNQX and GYKI52466, antagonists of non-NMDA receptors. However, the application of either kainate or AMPA, agonists for non-NMDA receptors, produced no type of response in the same neurons. The QA-induced K(+)-current response was not depressed at all by an intracellular injection of either guanosine 5'-O-(2-thiodiphosphate) (GDP-betaS) or guanosine 5'-O-(3-thiotriphosphate) (GTP-gammaS), but the FMRFamide-induced response was markedly blocked by both GDP-betaS and GTP-gammaS in the same cell. Furthermore, the QA- and FMRFamide-induced K(+)-current responses were both decreased markedly when the temperature was lowered to 15 degrees C, from 23 degrees C. These results suggested that the QA-induced K(+)-current response is produced by an activation of a novel type of QA-receptor and that this response is not produced by an activation of the G protein.

ATP suppresses the K(+) current responses to FSH and adenosine in the follicular cells of Xenopus oocyte

The application of either follicle-stimulating hormone (FSH) or adenosine (Ade) induces a K(+)-current response in the follicular cells surrounding a Xenopus oocyte under a voltage clamp. These K(+)-current responses are reported to be produced by an increase in intracellular cAMP. A previous application of ATP to the same cells markedly depressed the K(+)-current responses to FSH and Ade. Furthermore, a 2 min application of phorbol 12,13-dibutyrate (PDBu), an activator of protein kinase C (PKC), significantly depressed the K(+)-current responses to FSH and Ade, but it had no significant effect on the Cl(-)-current response to ATP. An application of either ATP or PDBu also depressed the K(+)-current response induced by intracellularly applied cAMP. In contrast to the effect of PDBu, the application of 1-octanol, an inhibitor of gap junction channel, significantly depressed both the Ade- and ATP-induced responses, indicating that the acting site of 1-octanol is different from that of PKC. The results suggest that the depressing effect of ATP on the FSH- and Ade-induced K(+)-current responses might be mediated by PKC activation and that the site of PKC action might be downstream of the cAMP production involved in the K(+) channel opening.

[A case of renal cell carcinoma producing alpha-fetoprotein]

Renal cell carcinoma (RCC) producing alpha-fetoprotein (AFP) is a rare condition with only 11 cases reported in Japan to our knowledge. A 69-year-old man was admitted to our hospital for further examination of an incidental right renal tumor. Laboratory tests showed markedly increased serum level of AFP whereas both HBs antigen and anti-HCV antibody were negative. Computed tomography and magnetic resonance imaging imagings showed a right renal tumor but no tumor in liver, testis or lymph node. We performed right radical nephrectomy. Serum level of AFP declined within the normal range 7 weeks after nephrectomy according to its half-life curve. The tumor specimen was composed mainly of granular cells. Immunohistochemical examination of the tumor cells proved the presence of AFP in the cytoplasm. The possibility of AFP as a tumor marker of renal cell carcinoma in this case was presented.

Hypertrophic cardiomyopathy in two kittens

Two 2-month-old kittens presented with a loud cardiac murmur. One cat showed severe signs of heart failure such as respiratory effort and exercise intolerance. Echocardiography revealed left ventricular concentric hypertrophy and severe left ventricular outflow obstruction. They died at 5 and 12 months of age, respectively. Necropsy and histopathology confirmed hypertrophic cardiomyopathy.

Overexpression of p53 protein and MDM2 in papillary carcinomas of the thyroid: Correlations with clinicopathologic features

Expression of p53 protein and MDM2 was evaluated in paraffin-embedded tissue from 78 patients with papillary carcinomas of the thyroid (PCT), in order to elucidate the relationship between them and their correlations with some clinicopathologic features implicated in tumor progression. These proteins were expressed in nuclei of tumor cells, but not in non-tumor cells. Staining was defined as positive when 10% or more of tumor cells expressed these proteins. The number of cases positive for p53 protein was 21/78 (27%), and that positive for MDM2 was 26/78 (33%). Co-overexpression of p53 protein and MDM2 was observed in 12/78 cases (15%). A significant positive relationship was found between them (P < 0.01); p53-positive cases tended to be also positive for MDM2 and vice versa. Statistical analysis revealed that overexpression of p53 protein significantly correlated with large tumor size (P = 0.0271) and the presence of capsular invasion (P = 0.04). There were significant positive correlations between tumor size and intrathyroidal invasion and between tumor size and capsular invasion in PCT, suggesting that p53 protein overexpression is associated only with tumor progression (tumor size). However, we could not find any significant correlations between MDM2 expression and clinicopathologic features. Our findings suggest that overexpression of p53 protein and MDM2 in papillary carcinoma of the thyroid is associated with the progression of the tumors, and that p53 may be a marker of the progression of PCT.

The R-type pyocin of Pseudomonas aeruginosa is related to P2 phage, and the F-type is related to lambda phage

Pseudomonas aeruginosa produces three types of bacteriocins: R-, F- and S-type pyocins. The S-type pyocin is a colicin-like protein, whereas the R-type pyocin resembles a contractile but non-flexible tail structure of bacteriophage, and the F-type a flexible but non-contractile one. As genetically related phages exist for each type, these pyocins have been thought to be variations of defective phage. In the present study, the nucleotide sequence of R2 pyocin genes, along with those for F2 pyocin, which are located downstream of the R2 gene cluster on the chromosome of P. aeruginosa PAO1, was analysed in order to elucidate the relationship between the pyocins and bacteriophages. The results clearly demonstrated that the R-type pyocin is derived from a common ancestral origin with P2 phage and the F-type from lambda phage. This notion was supported by identification of a lysis gene cassette similar to those for bacteriophages. The gene organization of the R2 and F2 pyocin gene cluster, however, suggested that both pyocins are not simple defective phages, but are phage tails that have been evolutionarily specialized as bacteriocins. A systematic polymerase chain reaction (PCR) analysis of P. aeruginosa strains that produce various subtypes of R and F pyocins revealed that the genes for every subtype are located between trpE and trpG in the same or very similar gene organization as for R2 and F2 pyocins, but with alterations in genes that determine the receptor specificity.

[The problem of a long-term follow up in patients with renal cell carcinoma]

PURPOSE

We investigated on a problem of long-term follow up in patients with renal cell carcinoma.

PATIENTS AND METHODS

A total of 287 patients with renal cell carcinoma treated in Nara Medical University and affiliated facilities from January 1980 to December 1990 were examined. And we investigated the trend of explanation to patients including 287 patients from 1991 to 1995.

RESULTS

Up to December 1995, there are 76 patients (26.5%) unable to be followed and 211 patients able to be followed. The former group patients were less declared cancer rather than the latter group patients. Of 76, 22 patients (28.9%) might misunderstand completely recovering from the cancer disease. For the recent 5 years, those patients who were declared cancer increased, and those patients who were explained benign disease decreased.

CONCLUSION

These results suggested that declaration of cancer is important for patients with renal cell carcinoma to be followed for a long-term.

Balloon dilation of right ventricular outflow tract in a dog with tetralogy of Fallot

Balloon dilation was performed on a dog with tetralogy of Fallot. Immediately following balloon dilation, the peak systolic pressure gradient across the pulmonic valve declined from 97 to 63 mmHg. Doppler echocardiography following balloon dilation revealed increased pulmonary blood flow. Clinical symptoms obviously improved and the dog's improved condition was maintained for 4 months. There were no serious complications in performing the procedure. It was concluded that balloon dilation was a safe and effective treatment for a dog case with tetralogy of Fallot. Long-term follow-up studies will be required to identify the exact indications of balloon dilation for tetralogy of Fallot.

[Intra-arterial chemotherapy for invasive bladder cancer]

The present investigation was conducted to examine the effects of intra-arterial chemotherapy (IAC) for patients with invasive bladder cancer. A total of 37 patients were treated with IAC at Nara Medical University and its affiliated hospitals between January, 1993 and August, 1997. There were 27 patients in the poor risk group. The remaining 10 patients underwent anti-tumor IAC. Thirty of the 37 patients received chemotherapeutic agents via a reservoir, and the remaining 7 patients received a one-shot injection of agents followed by transcatheter arterial embolization (TAE). In the reservoir group, there were 18 patients who received IAC in combination with radiation therapy. As a result, reduction of tumor size was noted in 53%, and the 3-year cause-specific survival rate was 54% in all cases. There was a significant difference in the 3-year survival rate between the radiation-treated group and the group without radiation. The adverse events included anemia, leukopenia, thrombocytopenia and gastrointestinal symptoms, but none of them were severe. The results of the present study indicate that IAC is useful in the treatment of invasive bladder cancer for poor risk patients.

Comparison of a 1.0 molar and a 0.5 molar formulation of gadobutrol in dynamic MR imaging of the liver in rats with hepatocellular carcinoma

The efficacy of a 1.0 molar formulation of gadobutrol was compared with that of a 0.5 molar formulation in dynamic magnetic resonance (MR) imaging of the liver in rats with hepatocellular carcinoma (HCC). Seven nodules histologically identified as moderately differentiated HCC underwent dynamic study. In the normal parenchyma surrounding these tumors, the 0.5 molar and 1.0 molar formulations yielded similar enhancement patterns, with maximum enhancement value of approximately 35% at 20 to 40 s after injection. In the tumors, the 0.5 molar formulation induced approximately 65% enhancement, whereas the 1.0 molar formulation, used at the same dose as the 0.5 molar formulation, induced significantly higher enhancement until 10 min after injection with maximum enhancement of approximately 90%. These findings indicate that the 1.0 molar formulation could be more efficacious than the 0.5 molar formulation in dynamic MR studies of moderately differentiated HCC even when injected at the same dose.

c-erbB-2 protein is expressed in hepatolithiasis and cholangiocarcinoma

AIMS

The c-erbB-2 proto-oncogene encodes a transmembrane protein which is highly homologous to epidermal growth factor receptor. Overexpression of this c-erbB-2 protein has been reported in many human carcinomas, including breast carcinoma. However, there have been few studies of the expression of c-erbB-2 in cholangiocarcinoma and hepatolithiasis, a condition occasionally associated with cholangiocarcinoma.

METHODS AND RESULTS

In this study, we evaluated immunoreactivity for the c-erbB-2 protein in human cholangiocarcinomas (n = 47), hepatolithiasis (n = 20), fetal livers (n = 36) and normal adult livers (n = 6). In normal adult livers and fetal livers, expression of c-erbB-2 protein could not be detected in hepatocytes or intrahepatic biliary cells. In hepatolithiasis, there was overexpression of c-erbB-2 in 15/20 (75%). The expression was found with a membranous pattern on the proliferated intrahepatic bile ducts and proliferated intrahepatic peribiliary glands around the bile ducts containing stones. Hepatocytes were negative for c-erbB-2 protein. Moreover, the biliary cell expression of the c-erbB-2 protein correlated significantly with Ki67 labelling index. On the other hand, aberrant expression of c-erbB-2 was found in 33/47 (70%) cholangiocarcinomas. The c-erbB-2 expression in cholangiocarcinomas did not correlate with Ki67 labelling index or p53 expression.

CONCLUSIONS

These results indicate that aberrant expression of c-erbB-2 protein is found in cholangiocarcinoma and also in noncancerous biliary proliferative lesions such as hepatolithiasis. These findings also suggest that c-erbB-2 oncogene participates not only in cholangiocarcinogenesis but also in biliary cell proliferation in non-neoplastic conditions.

Systemic histopathology of rats treated with 6-sulfanilamidoindazole, a novel arthritogenic sulfonamide

6-Sulfanilamidoindazole (6SAI) is a sulfonamide that induces acute, self-limiting arthritis in rats, and 6SAI-induced arthritis is thought to be a model for testing anti-inflammatory agents. In this study, in order to clarify the location of arthritis and relationships between arthritis and other changes in this model, we have investigated the detailed pathologic changes in rats administered orally with 6SAI (125, 250, 500 mg/kg) daily for 4 wk in a time-course experiment. Moderate to severe arthritis was observed in rats of middle- and high-dose groups. Histologically, in the affected ankle, exudative synovitis and periarthritis were observed at 1 wk, granulation tissue formation with angiogenesis and periosteal new bone formation at 2 wk, and marked fibrosis of affected area at 4 wk, respectively. In addition to these changes, in periarticular and periosteal tissues of affected ankles, subendothelial insudation of small-sized arteries and medial fibrinoid degeneration of medium-sized arteries were observed at 1 and 2 wk and intimal thickening and medial hypertrophy at 4 wk, respectively. No arterial changes were observed in the unaffected ankles. Similar arterial changes were often observed in the liver, thyroid glands, and lungs and rarely in various organs and tissues. Acute inflammation of serous tissues such as mesentery, mediastinum, and capsule of spleen or thymus were also present in 6SAI-treated groups, and it was sometimes accompanied by arteritis. In addition, in 6SAI-treated rats, follicular hyperplasia of thyroid glands and pituitary changes, which are thought to be related to depression of thyroid hormone production by 6SAI, were observed. These results show that 6SAI induces not only arthritis but also arteritis, serositis, and thyroid change, and it is necessary to take the interaction between these changes into consideration when anti-inflammatory agents are tested in this model.

Expression of epithelial-cadherin, alpha-catenin and beta-catenin during human intrahepatic bile duct development: a possible role in bile duct morphogenesis

BACKGROUND/AIMS

Cell adhesion molecules play an important role in the morphogenesis of developing organs. However, little is known about their expression during intrahepatic bile duct development.

METHODS

We immunohistochemically investigated the expression of E-cadherin (E-Cad), alpha-catenin (A-Cat) and beta-catenin (B-Cat) during human intrahepatic bile duct development, using 31 fetal livers of various gestational ages. The developmental stages of bile ducts were classified into the ductal plate, migrating biliary cells (remodeling stage), and immature bile ducts (remodeled stage).

RESULTS

E-Cad was broadly and strongly expressed in the ductal plate with a cytoplasmic pattern, heterogeneously and weakly expressed in the migrating biliary cells with a cytoplasmic pattern, and broadly and strongly expressed in immature bile ducts with a membranous pattern. A-Cat was broadly and strongly expressed in the ductal plate with a membrane pattern, broadly and moderately expressed in the migrating biliary cells with a membranous pattern, and broadly and strongly expressed in immature bile ducts with a membranous pattern. In contrast, expression of B-Cat was weak or slight in the ductal plate, but B-Cat was expressed broadly and strongly with a membranous pattern in migrating biliary cells and in immature bile ducts. Immature hepatocytes rarely expressed E-Cad and A-Cat, but expressed B-Cat with a membranous pattern throughout development.

CONCLUSIONS

These results suggest that E-Cad, A-Cat and B-Cat are involved in the normal developmental morphogenesis of human intrahepatic bile ducts.

[A case of squamous cell carcinoma of the lung associated with exophthalmos and hypercalcemia]

A 69-year-old man visited in the department of ophthalmology of this university, complained with exophthalmos. He was pointed out hypercalcemia and transferred to the department of endocrinology. The chest X-ray and thoracic CT showed a large mass in lower lobe of the left lung. Cytological diagnosis of this tumor was squamous cell carcinoma. In clinical examination, serum CA was 12.2 mg/dl in spite of normal level of PTH, calcitonin, 1 alpha, -25 (OH) 2D3 and uric cAMP. On the other hand, PTHrP-intact in serum was 9.8 pmol/l. His thyroid gland had no abnormality in palpation or roentogenological examination. The thyroid functions, thyroglobulin, thyrotropin receptor antibody, thyroid test and microsome test were all in normal limit. From these results, he was diagnosed of lung cancer with humoral hypercalcemia of malignancy and euthyroid "isolated" Graves' ophthalmopathy. Left lower lobectomy with mediastinal lymph node dissection (R 2 a) was done and p-stage was IIIA. After operation, serum Ca decreased in normal level and the exophthalmos was also improved gradually. He was in well until 10 months after operation, and died with multiple lung metastases and hypercalcemia. Exophthalmos was also recurred in his terminal stage. Similar case could not find in literature and some discussion of the literatures was mentioned.

Amperometric biosensor with a composite membrane of sol-gel derived enzyme film and electrochemically generated poly(1,2-diaminobenzene) film

A sol-gel silicate-based biosensor for glucose was made by utilizing a composite membrane of sol-gel enzyme film and electrochemically generated poly(1,2-diaminobenzene) film to improve the selectivity of the sol-gel enzyme sensors. The stability of the sensor was improved by exposing the enzyme layer to glutaraldehyde vapor. The glucose sensor responded rapidly (ca. 15 s) to glucose at 0.6 V (versus Ag/AgCl), without any interferences from electroactive species such as L-ascorbate and urate below 0.2 mM. Reliable results were obtained in the assays of glucose in controlled human sera, with both the steady-state and flow-injection measurements. Subsequently, the same sol-gel procedure was applied to the preparation of the sensors for galactose and cholesterol. The galactose and cholesterol sensors responded rapidly to galactose and cholesterol, respectively, although the sensitivity of these sensors was inferior to that of glucose sensor.