Assessment of coal gasification in a pressurized fixed bed gasifier using an ASPEN plus and Euler–Euler model

With the help of Aspen Plus, a two-dimensional unsteady CFD model is developed to simulate the coal gasification process in a fixed bed gasifier. A developed and validated two dimensional CFD model for coal gasification has been used to predict and assess the viability of the syngas generation from coal gasification employing the updraft fixed bed gasifier. The process rate model and the sub-model of gas generation are determined. The particle size variation and char burning during gasification are also taken into account. In order to verify the model and increase the understanding of gasification characteristics, a set of experiments and numerical comparisons have been carried out. The simulated results in the bed are used to predict the composition of syngas and the conversion of carbon. The model proposed in this paper is a promising tool for simulating the coal gasification process in a fixed bed gasifier.

Fluid dynamics model on fluidized bed gasifier using agro-industrial biomass as fuel

The present study shows the experimental and numerical results of thermal gasification of biomass, on the energy potential of agro-industrial waste from the Portalegre region. Gasification tests were performed in a pilot-scale fluidized bed gasifier, in order to study the behavior of peach stones and miscanthus to investigate the effect of gasification temperatures at 750°C, 800°C and 850°C at a constant biomass flow rate of 45kg/h. In order to optimize the operating conditions of the biomass gasification process, a numerical model is developed namely COMMENT code. This model is a computer model of two dimensions describing the biomass gasification processes in a fluidized bed gasifier using peach stone and miscanthus as fuel. Both phases, solid and gaseous, were described using an Eulerian-Eulerian approach exchanging mass, energy, and momentum. The numerical model results are then compared with experimental results. The produced results show the impact of the increased temperature in the calorific value of the syngas. The tests carried out at 750°C shown an increase in CO2 and N2 and a decrease of CO in the range of 5% comparing to the tests carried out at 850°C. In addition, increased temperature favors a decrease in tar production in thermal gasification process. Numerical results shows to be in good agreement with the experimental data.

Influence of simulated MSW sizes on the combustion process in a fixed bed: CFD and experimental approaches

This work presents the effect of the simulated sizes of Municipal Solid Waste (MSW) on the combustion process in a fixed bed experimentally and numerically. The effect of temperature, gas emissions, flame front velocity and process rate are discussed for three different sizes of MSW: 10, 30, and 50 mm. The study found that for the operating conditions of the current model, when the diameter of particles is decreased, the bulk density of the material is increased, resulting in a decrease of convective heat transfer as well as combustion speed. As the diameter size of the material particles increase, the height of the post-combustion zone is increased, while the temperature in a high temperature area is decreased, due to the decrease in the material's bulk density and the excessive increase in porosity. Results also show that the average emission concentration of CO and CO2 decreases gradually with an increase in the particle diameter size.

Effect of ash content on the combustion process of simulated MSW in the fixed bed

This paper experimentally and numerically investigates the effects of ash content on the combustion process of simulated Municipal Solid Waste (MSW). A fixed-bed experimental reactor was utilized to reveal the combustion characteristics. Temperature distributions, ignition front velocity, and the characteristics of gas species' release were measured and simulated during the combustion process. In the present work, the two-dimensional unsteady mathematical heterogeneous model was developed to simulate the combustion process in the bed, including the process rate model as well as NOx production model. The simulation results in the bed are accordant with the experimental results. The results show that as ash content increases, the lower burning rate of fuel results in char particles leaving the grate without being fully burned, causing a loss of combustible material in the MSW in a fixed bed and therefore reducing the combustion efficiency and increasing the burning time of the MSW.

Numerical simulation of gas concentration and dioxin formation for MSW combustion in a fixed bed

A numerical model was employed to simulate the combustion process in a fixed porous bed of municipal solid waste (MSW). Mass, momentum, energy and species conservation equations of the waste bed were set up to describe the incineration process. The rate of moisture evaporation, volatile matter devolatilization, char combustion, NOx production, and reduction and dioxin formation were calculated and established according to the local thermal conditions and waste property characteristics. Changes in the bed volume during incineration were calculated according to the reaction rate of the process. The simulation results were compared with experimental data, which shows that the incineration process of waste in the fixed bed was reasonably simulated. The simulation results of weight loss and solid temperature in the bed agree with the experimental data, which shows that the waste combustion rate is nearly constant in the middle of the incineration process, and that moisture evaporation takes up most of the time for the overall incineration experiment. The emission of gas species from the bed surface is also agreeably simulated, with O2, CO2, and CO concentrations in flue gas agreeing with the experimental data. The simulation results benefit the understanding of the combustion process in the waste bed as well as the design of incinerator grates.

Numerical and experimental studies on effects of moisture content on combustion characteristics of simulated municipal solid wastes in a fixed bed

In order to reveal the features of the combustion process in the porous bed of a waste incinerator, a two-dimensional unsteady state model and experimental study were employed to investigate the combustion process in a fixed bed of municipal solid waste (MSW) on the combustion process in a fixed bed reactor. Conservation equations of the waste bed were implemented to describe the incineration process. The gas phase turbulence was modeled using the k-ε turbulent model and the particle phase was modeled using the kinetic theory of granular flow. The rate of moisture evaporation, devolatilization rate, and char burnout was calculated according to the waste property characters. The simulation results were then compared with experimental data for different moisture content of MSW, which shows that the incineration process of waste in the fixed bed is reasonably simulated. The simulation results of solid temperature, gas species and process rate in the bed are accordant with experimental data. Due to the high moisture content of fuel, moisture evaporation consumes a vast amount of heat, and the evaporation takes up most of the combustion time (about 2/3 of the whole combustion process). The whole bed combustion process reduces greatly as MSW moisture content increases. The experimental and simulation results provide direction for design and optimization of the fixed bed of MSW.