Humidity activated ultra-selective room temperature gas sensor based on W doped MoS2/RGO composites for trace level ammonia detection

The lack of highly efficient, cost effective and stable ammonia gas sensors functionable at room temperature even in extreme humid environments poses significant challenge for the future generation gas sensors. The prime factors that impede the development of such next generation gas sensors are the strong interference of humidity and sluggish selectivity. Herein, we fabricated tungsten doped molybdenum disulphide/reduced graphene oxide composite by an in-situ hydrothermal method to exploit the adsorption, dissolution (solubility), ionization and transmission process of ammonia and thereby to effectuate its trace level detection even in indispensable humid environments. The protype based on 5 at.% Tungsten doped MoS2/RGO (W5) gas sensor exhibited 3.8-fold increment in its response to 50 ppm of ammonia when the relative humidity varied from 20 % to 70 % with ultra-high selectivity at room temperature. The as prepared gas sensor revealed a practical detection limit down to 1 ppm with a substantial response and rapid recovery time. Furthermore, W5 gas sensor exhibited a 42-fold increment in response to 50 ppm of ammonia relative to its pristine (MoS2/RGO) MG composite with a RH of 70 %. The proton hopping mechanism accountable for such an enormous enhancement in ammonia sensing and its potential for breath sensor are briefly annotated.

Label extension, single-arm, phase III study shows efficacy and safety of stempeucel® in patients with critical limb ischemia due to atherosclerotic peripheral arterial disease

BACKGROUND

Peripheral arterial disease (PAD) of lower extremities comprises a clinical spectrum that extends from asymptomatic patients to critical limb ischemia (CLI) patients. 10% to 40% of the patients are at the risk of primary amputation. This study was planned in "no-option" patients of CLI due to atherosclerotic PAD to assess the efficacy and safety of pooled, allogeneic, adult human bone marrow-derived mesenchymal stromal cells which is already approved for marketing in India for CLI due to Buerger's disease.

METHODS

This was a single-arm, multi-centric, phase III study where mesenchymal stromal cells was injected as 2 million cells/kg body weight in the calf muscle and around the ulcer. Twenty-four patients of lower extremity CLI due to PAD with Rutherford III-5 or III-6 and ankle-brachial pressure index ≤ 0.6 and having have at least one ulcer with area between 0.5 and 10 cm² were included in the study. These patients were evaluated over 12 months from drug administration.

RESULTS

Over a period of 12 months, statistical significant reduction of rest pain and ulcer size along with improvement in ankle-brachial pressure index and ankle systolic was observed. The quality of life of patients improved together with increase in total walking distance and major amputation-free survival time.

CONCLUSION

Mesenchymal stromal cells may be a feasible option to treat "no-option" patients with atherosclerotic PAD. Trial registration This study is registered prospectively in National Institutes of Health and Clinical Trials Registry-India (CTRI) website: CTRI/2018/06/014436. Registered 6th June 2018. http://ctri.nic.in/Clinicaltrials/pmaindet2.php?trialid=24050&EncHid=&userName=stempeutics .

Electronic sensitization enhanced p-type ammonia gas sensing of zinc doped MoS2/RGO composites

Zinc (Zn) doping induced synergetic effects of defects engineering and heterojunction in Molybdenum disulphide/Reduced graphene oxide (MoS₂/RGO) effectively enhances the p-type Volatile organic compounds (VOC) gas sensing traits and helps in tailoring the over dependence on noble metals for surface sensitization. Through this work, we have successfully prepared Zn doped MoS₂ grafted on RGO employing an in-situ hydrothermal method. Optimal doping concentration of Zn dopants in the MoS₂ lattice triggered more active sites on the basal plane of MoS₂ with the aid of defects promoted by the zinc dopants. Effective intercalation of RGO further boost up the exposed surface area of Zn doped MoS₂ for further interaction of ammonia gas molecules. Besides, smaller crystallite size brought out by 5% Zn dopants aids in efficient charge transfer across the heterojunctions that further amplifies the ammonia sensing traits with a peak response of 32.40% along with a response time of 21.3 s and recovery time of 44.90 s. The as prepared ammonia gas sensor exhibited excellent selectivity and repeatability. The obtained results reveal that transition metal doping into the host lattice proves to be a promising approach for VOC sensing characteristics of p-type gas sensors and gives insight about the importance of dopants and defects for the development of highly efficient gas sensors in the future.

An efficient hybrid MPA-MOA control approach based on DC microgrid connected constant power loads

The increased use of DC microgrid for complex application leads to the need for advanced control design for stable operation of the system. Loads connected to a DC microgrid are controlled by power electronic devices and exhibit constant power load (CPL) behavior, which is a serious challenge for stability as it enhances nonlinearity and reduces effective damping. This manuscript proposes an effective hybrid approach based on DC micro grid (MG) connected constant power loads. The proposed control approach is the consolidation of Marine Predators Algorithm (MPA) and mayfly optimization algorithm (MOA), hence it is named as hybrid MPA-MOA approach. The DC microgrid system contains the sources, like two photovoltaic (PV), two wind turbine (WT), grid, battery. The major objective of the proposed approach is “to find the problems while interfacing the sources of the microgrid and increase the security of the system”. The proposed approach contains two controllers, they are primary and secondary. The primary controller is based on droop controller that shares the current and limits the oscillations because of the constant power loads (CPL). The secondary controller is used to regulate the voltage of the system from a single area. The secondary control is executed using the proposed MPA-MOA method. The proposed method is executed on MATLAB/Simulink platform; its performance is analyzed with the existing methods. The THD (%), efficiency (%) and Eigen value of the proposed technique achieves 1.4%, 92% and -9.3541±j2.4209.

A hybrid control technique for small signal stability analysis for microgrids under uncertainty

Inverter-based distributed generators (DG) based on renewable sources are generally utilized in microgrids. Most of these sources work in droop control mode to effectively share the load. Higher droop is chosen on these systems to recover dynamic power sharing. This paper proposes a Hybrid Control Technique for Small Signal Stability Analysis for Microgrids under Uncertainty. The proposed topology is to recover the capacity of power system is used to restore the normal operating condition. The proposed hybrid technique is the combination of chaotic Henry gas solubility optimization (CHGSO) and recalling-enhanced recurrent neural network (RENNN) and therefore called the CHGSO-RENNN technique. The proposed technique is used to optimally predict the internal and external current loop control parameters in light and the variety of power and current parameters. The small stability is revealed through the working conditions of the whole machine. The overall stability of the small signal is investigated in a linear model so that both source and load are used to characterize the state matrix of the frame that is used for eigenvalue examination. The PI controller gain parameters are optimally tuned and the controller offers reliable frame operation. The proposed technique is performed on MATLAB/Simulink work platform.

Impact of ANN in Revealing of Viral Peptides

All organisms contain antimicrobial peptides (AMPs), which are a critical component of the innate immune system. These chemicals have the ability to suppress the growth of a variety of fungi, bacteria, and viruses. Because AMPs interact with structural components of the microbial cell membrane and have a wide range of cellular targets, bacteria are unlikely to be able to develop resistance to them in the short term. The underlying structure of AMPs is critical in determining the selectivity with which they target their respective targets. As far as we know, peptides have not been tested in a lab to see if they can fight bacteria, fungus, and viruses in real life. In this paper, we develop an artificial neural network (ANN) using a back propagation neural network (BPNN) that enables optimal classification of tendency of a peptide sequence that involves the activities of antifungal, antibacterial, or antiviral. The BPNN is trained on the datasets collected across different repositories and then the overfitting is avoided using particle swarm optimization (PSO) algorithm. Hence, at the time of testing, the BPNN clearly finds the predicted samples belonging to the same classes and this avoids the problem of finding the false positives. The simulation is conducted to test the efficacy of the model against various metrics that includes accuracy, precision, recall, and f1-measure. The effectiveness of the BPNN-PSO model in classifying instances at a faster rate than other techniques is demonstrated by its performance. The principle is straightforward, it is not difficult to programme, it converges more quickly, and it generally offers a superior solution.

Antibacterial efficacy of Lawsonia inermis (Henna) against the predominant endodontic pathogen (Enterococcus faecalis)-An in vitro antimicrobial assay

Introduction and Aim: The prospect of a successful root canal therapy relies on three main factors which includes proper instrumentation, disinfection and obturation of root canal. The goal of the present study is to analyse the anti-microbial efficacy of henna (Lawsonia inermis) against the major endodontic pathogen, Enterococcus faecalis.   Materials and Methods: In this study, the antibacterial efficacy of Lawsonia inermis is investigated against Enterococcs feacalis using the method of agar disc diffusion. Extracts of L. inermis were prepared by using methanol as an extraction solvent, whereas DMSO (Dimethyl sulfoxide) and water were used as dissolution solvents. The diluted henna sample was used as the test sample, while positive control used was chlorhexidine gluconate solution and the negative control used was saline. The bacteria were cultured, and the samples were placed to measure the zone of inhibition.   Results: Extracts of L. inermis displayed noteworthy antimicrobial activity against E. fecalis. The zone of inhibition of henna against E. fecalis was found to be 11mm whereas the positive control had 14mm.   Conclusion: In conclusion, the henna extracts had shown acceptable antimicrobial efficacy and thus this study provides the scientific reason for the use of L. inermis in dentistry.

Investigation on hydrogen bonds and conformational changes in protein/polysaccharide/ceramic based tri-component system

The main attention of present work is to study the molecular level interactions in the interface of biocomposite to increase their applicability. A specific kind of molecular interaction namely, hydrogen bonds play a vital role in deciding composite property. In this study, we construct a tri-component system based on silk fibroin/sodium alginate/hydroxyapatite by varying protein and polysaccharide proportions using in-situ co-precipitation method. The Fourier Transfer Infrared (FTIR) prediction state that prepared composite exhibit inter-(OH⋯N, OH⋯O, OH⋯π) and intra-(OH⋯OH) molecular hydrogen bonds and their strength are varied in accordance with composition of composite. During composite preparation, conformational changes from the random coil to β-sheet structure through intermediate β-turns exist within the protein molecule that is confirmed by vibrational spectra. The crystallographic profile and morphology of HAP were greatly influenced by virtue of polymer matrix. Simulated body fluid (SBF) immersion study shows that biodegradation and swelling ratio are correlated with type of hydrogen bond and secondary structure of protein. Moreover, the in-vitro biomineralization, cytotoxicity and antibacterial activity of composite were analysed in detail.

Surfactant assisted disperser pretreatment on the liquefaction of Ulva reticulata and evaluation of biodegradability for energy efficient biofuel production through nonlinear regression modelling

The present study aimed to increase the disintegration potential of marine macroalgae, (Ulva reticulata) through chemo mechanical pretreatment (CMP) in an energy efficient manner. By combining surfactant with disperser, the specific energy input was considerably reduced from 437.1 kJ/kg TS to 264.9 kJ/kg TS to achieve 10.7% liquefaction. A disperser rpm (10,000), pretreatment time (30 min) and tween 80 dosage (21.6 mg/L) were considered as an optimum for effective liquefaction of algal biomass. CMP was designated as an appropriate pretreatment resulting in a higher soluble organic release 1250 mg/L, respectively. Anaerobic fermentation results revealed that the volatile fatty acid (VFA) concentration was doubled (782 mg/L) in CMP when compared to mechanical pretreatment (MP) (345 mg/L). CMP pretreated algal biomass was considered as the suitable for biohydrogen production with highest H₂ yield of about 63 mL H₂/g COD than (MP) (45 mL H₂/g COD) and control (10 mL H₂/g COD).

Synthesis of water-soluble and bio-taggable CdSe@ZnS quantum dots

Many synthesized semiconductor QDs materials are formed using trioctylphosphine oxide (TOPO) but it requires high temperature, is very expensive and is also hydrophobic. Our study deals with selective syntheses of CdSe and core–shell CdSe/ZnS quantum dots (QDs) in aqueous solution by a simple heating and refluxing method. It is more hydrophilic, needs less temperature, is economically viable and is eco-friendly. Bio-ligands, such as thioacetamide, itaconic acid and glutathione, were used as stabilizers for the biosynthesis of QDs. A simplified aqueous route was used to improve the quality of the colloidal nanocrystals. As a result, highly monodisperse, photoluminescent and biocompatible nanoparticles were obtained. The synthesized QDs were characterized by XRD, FTIR, confocal microscopy, ultraviolet (UV) absorption and photoluminescence (PL). The size of synthesized QDs was observed as 5.74 nm and the core–shell shape was confirmed by using XRD and confocal microscopy respectively. The QD nanoparticles showed antibacterial activity against pathogenic bacteria. The QDs could be applied for biological labelling, fluorescence bio-sensing and bio-imaging etc.

Mystristic capped CdSe QDs with schematic diagram and formation mechanism of bio-taggable CdSe@ZnS QDs.

Impact of mild alkali dosage on immobilized Exiguobacterium spp. mediated cost and energy efficient sludge disintegration

Approaches to (extracellular polymeric substance) EPS removal were studied with major aim to enhance the biodegradability and sludge solubilization. In this study, a novel approach of entrapment of bacterial strain was carried out to achieve long term activity of protease secreting bacteria Exiguobacterium sp. A mild treatment of potassium hydroxide (KOH) was applied to remove EPS which was followed by entrapment under the biological pretreatment. The efficiency of Exiguobacterium was predicted through dissolvable organic and suspended solids (SS) reduction. The maximum dissolvable organic matter released was 2300mg/L with the solubilization of 23% which was obtained for sludge without EPS (SWOE). For dissolvable organic release, SWOE showed higher final methane production of 232mL/g COD at the production rate of 16.2mL/g COD.d. The SWOE pretreatment was found to be cost effective and less energy intensive beneficial in terms of energy and cost (43.9KWh and -8.2USD) when compared to sludge with EPS (SWE) pretreatment (-177.6KWh and -91.23USD).

Bopyrid isopods parasitizing on the cultured fresh water prawn, Macrobrachiummalcolmsonii in South India

The bopyrid isopods are common in wild Macrobrachium spp. but not common in aquaculture condition. This is the first study that reports the parasitizing of bopyrid isopods on the cultured M. malcolmsonii. Bopyrid isopod (Probopyrus buitendijki) was identified in the branchial cavities of the fresh water prawn, M. malcolmsonii from grow-out culture pond at Kuriyamangalam, India. Macrobrachium malcolmsonii is a new host for P. buitendijki. A total of 1323 M. malcolmsonii were checked for this study. The overall prevalence of the parasitic infestation was reached 46.2 %. The parasitic infection was higher in female (83 %) than in male (3.4 %). Highest prevalence of infestation was found in the median size group (7-8 cm) (58.7 %). Infected females were not berried unlike uninfected prawns. The parasites cause infertility and does not found any organ deformities due to the infestation. The parasite was inversely attached in the gill chamber with no lesion on the gill but the infected branchial chamber became bulged.

Improving the biogas production performance of municipal waste activated sludge via disperser induced microwave disintegration

In this study, the influence of disperser induced microwave pretreatment was investigated to analyze the proficiency of floc disruption on subsequent disintegration and biodegradability process. Initially, the flocs in the sludge was disrupted through disperser at a specific energy input of 25.3kJ/kgTS. The upshot of the microwave disintegration presents that the solids reduction and solubilization of floc disrupted (disperser induced microwave pretreated) sludge was found to be 17.33% and 22% relatively greater than that achieved in microwave pretreated (9.3% and 16%) sludge alone. The biodegradability analysis, affords an evaluation of parameter confidence and correlation determination. The eventual biodegradability of microwave pretreated, and floc disrupted sludges were computed to be 0.15(gCOD/gCOD) and 0.28(gCOD/gCOD), respectively. An economic assessment of this study offers a positive net profit of about 104.8USD/ton of sludge in floc disrupted sample.

Treatment of seafood processing wastewater using upflow microbial fuel cell for power generation and identification of bacterial community in anodic biofilm

Tubular upflow microbial fuel cell (MFC) utilizing sea food processing wastewater was evaluated for wastewater treatment efficiency and power generation. At an organic loading rate (OLR) of 0.6 g d(-1), the MFC accomplished total and soluble chemical oxygen demand (COD) removal of 83 and 95%, respectively. A maximum power density of 105 mW m(-2) (2.21 W m(-3)) was achieved at an OLR of 2.57 g d(-1). The predominant bacterial communities of anode biofilm were identified as RB1A (LC035455), RB1B (LC035456), RB1C (LC035457) and RB1E (LC035458). All the four strains belonged to genera Stenotrophomonas. The results of the study reaffirms that the seafood processing wastewater can be treated in an upflow MFC for simultaneous power generation and wastewater treatment.

Evaluation of the effect of ultraviolet stabilizers on the change in color of pigmented silicone elastomer: An in vitro study

Aim and Objective:

To compare and evaluate the effect of ultraviolet (UV) stabilizers (Chimassorb 81 and Uvinul 5050) on the color change of pigmented elastomer.

Materials and Methods:

Two pigments - Red (P112 Brilliant Red) and Yellow (P106 Yellow) and two UV stabilizers Chimassorb 81 and Uvinul 5050 were studied. A total of six groups of 10 samples each were fabricated using a combination of the above colors and stabilizers: Group A1 - Red control, Group A2 - Red + Chimassorb 81, Group A3 - Red + Uvinul 5050. Group B1 - Yellow control, Group B2 - Yellow + Chimassorb 81, Group B3 - Yellow + Uvinul 5050. All samples were subjected to ageing in an accelerated weathering chamber (Weather-Ometer). Color values L, a, and b were measured at 500 and 1000 h for all samples before and after weathering and change in color (Delta E) was calculated.

Results:

All groups showed a significant color change. At 500 h, Chimassorb 81 showed a statistically significant lesser change in both colors (red - 3.66 and yellow - 2.8) compared to their control groups (red - 5.19 and yellow - 4.9). At 1000 h, both UV stabilizers showed lesser color change (A2 - 5.49, B2 - 4.28, A3 - 7.47 and B3 - 4.09) as compared to their respective control groups (A1 - 9.57 and B1 - 5.91). Overall, the change in the color with Group A was more than Group B.

Conclusion:

Addition of UV stabilizers helped the reduction of color change. Chimassorb 81 showed a greater reduction in color change in both colors consistently at 500 and 1000 h.

Polymeric Drug for Antimicrobial Activity Studies: Synthesis and Characterization

In this study, 2′,4-dichloro-5′-fluoro-1-ene-2-(4-hydroxyphenyl)phenone (EHP) was synthesized using 4-hydroxybenzaldehyde and 2, 4-dichloro-5-fluoro acetophenone (DFA); 4-[3-(2,4-dichloro-5-fluorophenyl)-3-oxoprop-1-en-1-yl]phenyl acrylate (EAP) was prepared by reacting EHP with acryloyl chloride. Poly(EAP) was prepared by solution polymerization and was characterized by IR, 1H and 13C NMR. The molecular weights of the polymer (EAP) (Mw: 3900 and Mn: 3600) were characterized by gel permeation chromatographic. Thermal stability of the polymer was characterized by thermogravimetric analysis method. Antimicrobial activity of the DFA, EHP, EAP and poly(EAP) were tested on three microorganisms; Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853 and Salmonella typhi ATCC 6539. The minimum concentration of the drug needed to inhibit the growth of the bacteria was estimated using a photometry assay.

Investigation on antimicrobial activity of root extracts of Thespesia populnea Linn

Many medicinal plants have been used for centuries in daily life to treat microbial diseases all over the world. In this study, the in vitro antibacterial activity of aqueous and ethanol root extracts of Thespesia populnea Linn were investigated. Antimicrobial properties of T. populnea Linn was evaluated against five pathogenic bacteria and two fungi. Disc diffusion method and minimum inhibitory concentration (MIC) were determined by broth serial dilution method. The ciprofloxacin (5 μg/ml) and flucanozole (100 units/disc) were used as positive controls for bacteria and fungi respectively. Different concentrations (50, 100, 150 μg/ml) of ethanolic and aqueous root extracts of T. populnea were checked for the dose dependent antibacterial activity. Thespesia populnea showed broad spectrum antimicrobial activity against gram positive and gram negative bacteria and maximum inhibition by ethanolic extract was observed at higher dose (250 μg/ml) as 27±0.2mm. The MIC of the ethanol extract was 10 μg/ml for Staphylococcus aureus and 750 μg/ml for Candida albicans. The antifungal activity offered against S. aureus by the ethanolic extract is more than the aqueous extract. The results concluded that the anti-microbial activity of T. populnea was dose dependent. As the concentration increased the inhibition zone also increased. Flavonoids and tannins present in the extracts may be responsible for the antimicrobial activity.

Antitumour activity of Sargassum wightii (Greville) extracts against Dalton's ascites lymphoma

Seaweeds have been used by mankind as medicine and food for more than 13,000 years. Marine algae are considered to produce a valuable phytoconstituents characterized by a broad spectrum of antitumor activities. The aim of the present study was to explore the effect of different solvent extracts of Sargassum wightii, Greville against Dalton's Ascitic Lymphoma (DAL) in Swiss male albino mice. DAL cells were injected intraperitoneally 1 x10(6) cell to the mice. Two days after cells injection the animals were treated with different solvent extracts of Sargassum wightii at dose of 200 mg kg(-1) for 14 days. 5-fluorouracil (20 mg kg(-1)) was used as reference drug. On day 11, cancer cell number, packed cell volume, decrease in tumour weight of the mice, increase in life span and hematological parameters were evaluated and compared with the same parameters in control. A significant increase in the life span and a decrease in the cancer cell number and tumour weight were noted in the tumour-induced mice after treatment with the extract. The haematological parameters were also normalized by the ethanolic and chloroform extracts in tumour-induced mice. These observations are suggestive of the protective effect of ethanolic extract of Sargassum wightii is comparatively better than other two tested extracts against Dalton's Ascitic Lymphoma (DAL).

Phytoplankton diversity in the Parangipettai coastal waters, southeast coast of India

An investigation was carried out during June 2005 to May 2007 on hydrography, composition and community structure of phytoplankton including chlorophyll a in Parangipettai coastal waters (southeast coast of India). Air and surface water temperatures varied from 25.5 to 31.2 degrees C and from 25 to 29.3 degrees C, respectively. Salinity values varied from 5 to 33.1 per thousand and the pH ranged between 7.2 and 8.3. Dissolved oxygen content varied from 3.1 to 7.9 mg l(-1) while the light extinction coefficient values (LEC) ranged between 1.8 and 11.0 cm. The range of inorganic nutrients viz., nitrate, nitrite, phosphate and silicate were: 6.5 - 27.0 microM; 1.0 - 8.9 microM; 0.1 - 3.0 microM and 15.0 - 140 microM, respectively. The range of chlorophyll a was: 2.0 - 7.5 microg l(-1). Presently, 117 phytoplankton species representing different classes viz: Bacillariophyceae (66); Dinophyceae (22); Cyanophyceae (19); Chlorophyceae (7) and Chrysophyceae (3) were recorded. The phytoplankton cell abundance varied from 0.14 to 132 cells ml(-1), with peak diversity (3.52 bits ind.(-1)) during summer season. The maximum abundance was found during summer season coinciding with the stable hydrographical conditions. Canonical Correspondence Analysis was applied in this study for discriminating environmental factors effecting on phytoplankton community at species level.

Perspectives of plant-associated microbes in heavy metal phytoremediation

"Phytoremediation" know-how to do-how is rapidly expanding and is being commercialized by harnessing the phyto-microbial diversity. This technology employs biodiversity to remove/contain pollutants from the air, soil and water. In recent years, there has been a considerable knowledge explosion in understanding plant-microbes-heavy metals interactions. Novel applications of plant-associated microbes have opened up promising areas of research in the field of phytoremediation technology. Various metabolites (e.g., 1-aminocyclopropane-1-carboxylic acid deaminase, indole-3-acetic acid, siderophores, organic acids, etc.) produced by plant-associated microbes (e.g., plant growth promoting bacteria, mycorrhizae) have been proposed to be involved in many biogeochemical processes operating in the rhizosphere. The salient functions include nutrient acquisition, cell elongation, metal detoxification and alleviation of biotic/abiotic stress in plants. Rhizosphere microbes accelerate metal mobility, or immobilization. Plants and associated microbes release inorganic and organic compounds possessing acidifying, chelating and/or reductive power. These functions are implicated to play an essential role in plant metal uptake. Overall the plant-associated beneficial microbes enhance the efficiency of phytoremediation process directly by altering the metal accumulation in plant tissues and indirectly by promoting the shoot and root biomass production. The present work aims to provide a comprehensive review of some of the promising processes mediated by plant-associated microbes and to illustrate how such processes influence heavy metal uptake through various biogeochemical processes including translocation, transformation, chelation, immobilization, solubilization, precipitation, volatilization and complexation of heavy metals ultimately facilitating phytoremediation.

Our experience of application of Autologous Bone Marrow Stem Cells in critical limb ischemia in six diabetic patients - A five-year follow-up

BACKGROUND

Numerous Clinical studies have reported the safety and efficacy of injection of one Marrow and Peripheral Blood Mononuclear cells in patients with lower limb ischemia. Earlier we have reported the six months follow-up of successful application of autologous bone marrow mononuclear cells in patients with Fontaine Stage IV critical limb ischemia due to diabetes. As a continuation of the previous study, herein we report the long term results of the six patients after a follow-up for five years.

MATERIALS & METHODS

Six Diabetic patients with Fontaine Stage IV critical limb ischemia with ulcers were given intra-lesional injections of their autologous bone marrow mononuclear cells (BMMNC), isolated following the cGMP protocols. The patients have been followed up at regular intervals for five years after the treatment with all relevant clinical investigations.

RESULTS

Six months follow-up results revealed that all the patients showed improvements with appearance of healthy granulation tissue and uniform revascularization. Complete healing was reported at a mean duration of nine months in five patients and one patient died due to a complication of renal failure, peritoneal dialysis and cardiac failure, which were unrelated to the BMMNC injection. Five year continuous follow-up revealed that the healed tissue with or without skin grafting remained healthy in all the five patients and two of the patients are able to walk without support with a pain free walking distance of greater than 100m.There were no adverse effects in any of the patients..

CONCLUSION

Autologous bone marrow stem cell therapy has been found to be salvaging the affected limb in patients with Fontaine Stage IV Critical Limb ischemia patients where revascularization was not feasible. Hence with our experience of six patients we recommend that the same should be considered in patients of similar clinical parameters before considering an amputation.

Carbamazepine-loaded porous microspheres for short-term sustained drug delivery

The present investigation is aimed to prepare the porous microspheres of carbamazepine using eudragit as release retardant, compritol as core forming agent, and HPMC as re-crystallization inhibitor for short-term sustained delivery of carbamazepine. The proposed microspheres were formulated using the emulsion solvent diffusion method. The obtained microspheres were characterized for its particle size distribution, thermal analysis (DSC), crystallinity (PXRD), surface morphology (SEM), and in vitro drug release. The prepared microspheres were found to be optimal in terms of particle size and entrapment efficacy. However, the obtained entrapment efficacy is insufficient to deliver the high dose drug such as carbamazepine. There were no compatibility issues and the drug is partially present in crystalline form in microspheres, which were confirmed by DSC and PXRD, respectively. The time to release 50% of drug from microspheres were in the range of 0.5 - 3.0 h, which could be used to prevent the formation of dihydrate and high extent of drug release. Further investigations are required to reduce the amount of polymer in microspheres that can provide maximum drug loading and acceptable dosage form.

Impact of mineral deposition on shrimp, Penaeus monodon in a high alkaline water

This study compares water quality parameters, shrimp growth and mortality rates, and biomass at harvest in two ponds of equal size, seeded with the same density (7 m2) of White Spot Syndrome Virus (WSSV) and Monodon Baculo Virus (MBV) negative post-larvae (PL)-20 of shrimp, Penaeus monodon in the Vellar estuary of South India. The primary difference between the ponds was the water source; one was filled from the estuary and the second with water from bore wells with high alkalinity. Temperature in both ponds was similar and reached 320C after 185 days of culture. Dissolved oxygen (DO) levels were within the acceptable range although levels in the alkaline pond were near the lower limit for the last 90 days before harvest. Salinity levels were similar in both ponds, above optimal levels, and increased over the 185 days. Alkalinity in the estuarine water was typically <50 ppm and again 200-320 ppm in the alkaline pond. In the alkaline pond, beginning on the 75th day mineral deposits was observed covering all parts of the shrimp including the eye and the inner gill chambers, and by harvest, 42% of the shrimp showed this coating. Elemental analysis identified the major constituents as calcium, phosphorus and manganese. Survival rates in the estuarine-water-fed pond was 92% with a total pond biomass at harvest of 1.65 tons ha-1 compared to survival of 79% in the alkaline pond and a biomass at harvest of 1.020 tons ha-1. When well water must be used, its alkalinity should be monitored and diluted with water from other sources.

Inoculation of Ni-resistant plant growth promoting bacterium Psychrobacter sp. strain SRS8 for the improvement of nickel phytoextraction by energy crops

This study was conducted to elucidate effects of inoculating plant growth-promoting bacterium Psychrobacter sp. SRS8 on the growth and phytoextraction potential of energy crops Ricinus communis and Helianthus annuus in artificially Ni contaminated soils. The toxicity symptom in plants under Ni stress expressed as chlorophyll, protein content, growth inhibition, and Fe, P concentrations were studied, and the possible relationship among them were also discussed. The PGPB SRS8 was found capable of stimulating plant growth and Ni accumulation in both plant species. Further, the stimulation effect on plant biomass, chlorophyll, and protein content was concomitant with increased Fe and P assimilation from soil to plants. Further, the induction of catalase and peroxidase activities was also involved in the ability of SRS8 to increase the tolerance in both plant species under Ni stress. The findings suggest that strain SRS8 play an important role in promoting the growth and phytoextraction efficiency of R. communis and H. annuus, which may be used for remediation of metal contaminated sites.

Plant growth promoting rhizobacteria and endophytes accelerate phytoremediation of metalliferous soils

Technogenic activities (industrial-plastic, textiles, microelectronics, wood preservatives; mining-mine refuse, tailings, smelting; agrochemicals-chemical fertilizers, farm yard manure, pesticides; aerosols-pyrometallurgical and automobile exhausts; biosolids-sewage sludge, domestic waste; fly ash-coal combustion products) are the primary sources of heavy metal contamination and pollution in the environment in addition to geogenic sources. During the last two decades, bioremediation has emerged as a potential tool to clean up the metal-contaminated/polluted environment. Exclusively derived processes by plants alone (phytoremediation) are time-consuming. Further, high levels of pollutants pose toxicity to the remediating plants. This situation could be ameliorated and accelerated by exploring the partnership of plant-microbe, which would improve the plant growth by facilitating the sequestration of toxic heavy metals. Plants can bioconcentrate (phytoextraction) as well as bioimmobilize or inactivate (phytostabilization) toxic heavy metals through in situ rhizospheric processes. The mobility and bioavailability of heavy metal in the soil, particularly at the rhizosphere where root uptake or exclusion takes place, are critical factors that affect phytoextraction and phytostabilization. Developing new methods for either enhancing (phytoextraction) or reducing the bioavailability of metal contaminants in the rhizosphere (phytostabilization) as well as improving plant establishment, growth, and health could significantly speed up the process of bioremediation techniques. In this review, we have highlighted the role of plant growth promoting rhizo- and/or endophytic bacteria in accelerating phytoremediation derived benefits in extensive tables and elaborate schematic sketches.

Plant growth promoting rhizobacteria and endophytes accelerate phytoremediation of metalliferous soils

Technogenic activities (industrial-plastic, textiles, microelectronics, wood preservatives; mining-mine refuse, tailings, smelting; agrochemicals-chemical fertilizers, farm yard manure, pesticides; aerosols-pyrometallurgical and automobile exhausts; biosolids-sewage sludge, domestic waste; fly ash-coal combustion products) are the primary sources of heavy metal contamination and pollution in the environment in addition to geogenic sources. During the last two decades, bioremediation has emerged as a potential tool to clean up the metal-contaminated/polluted environment. Exclusively derived processes by plants alone (phytoremediation) are time-consuming. Further, high levels of pollutants pose toxicity to the remediating plants. This situation could be ameliorated and accelerated by exploring the partnership of plant-microbe, which would improve the plant growth by facilitating the sequestration of toxic heavy metals. Plants can bioconcentrate (phytoextraction) as well as bioimmobilize or inactivate (phytostabilization) toxic heavy metals through in situ rhizospheric processes. The mobility and bioavailability of heavy metal in the soil, particularly at the rhizosphere where root uptake or exclusion takes place, are critical factors that affect phytoextraction and phytostabilization. Developing new methods for either enhancing (phytoextraction) or reducing the bioavailability of metal contaminants in the rhizosphere (phytostabilization) as well as improving plant establishment, growth, and health could significantly speed up the process of bioremediation techniques. In this review, we have highlighted the role of plant growth promoting rhizo- and/or endophytic bacteria in accelerating phytoremediation derived benefits in extensive tables and elaborate schematic sketches.

Seasonal variations in physico-chemical parameters and heavy metals in water and sediments of Uppanar estuary, Nagapattinam, India

The present study was carried out to determine the physico-chemical characteristics and heavy metals in water and sediments in Uppanar Estuary, Nagapattinam, Southeast coast of India during January to December 2007. The minimum and maximum values of atmospheric and surface water temperatures (degrees C), salinity (per thousand), pH and dissolved oxygen (ml l(-1)) were: 26.0-35.0; 25.0-33.5; 8.0-35.0; 7.2-8.2 and 2.8-5.5 respectively. The ranges of nitrate, nitrite, phosphate and silicate were: 7.05-24.23; 0.82-3.15; 0.31-2.18 and 40.0-198.0 (microM) respectively. The ranges of heavy metals in water (microg 1(-1)) and sediment (microg g(-1)) copper zinc, cadmium and mercury were: 2.45-18.25; 26.43-101.24; 1.23-24.35 and 0.01-0.22 and 5.02-81.27; 22.47-75.42; 2.25-10.06 and 0.01-0.16 respectively.

Influence of Simulated Gastrointestinal Fluids on Polymorphic Behavior of Anhydrous Carbamazepine Form III and Biopharmaceutical Relevance

The dissolution behavior and bioavailability of carbamazepine (CBZ) is rate-limited by formation of carbamazepine dihydrate (CBZ-D) in dissolution fluids. The present investigation involves formation and biopharmaceutical evaluation of CBZ-D obtained from simulated gastrointestinal fluids. The results obtained from solubility studies revealed that formation of CBZ-D was pH-dependent. The minimum solubility of 115 ± 1.7 mg/L obtained with simulated gastric fluid without pepsin indicates that the strongly acidic pH favors formation of CBZ-D and it was confirmed by the powder X-ray diffractography. Differential scanning calorimetry thermograms of samples revealed formation of CBZ-D and subsequent transition of CBZ form I. The percentage relative crystallinty for dihydrate was found to be 77.51%. Triton X present in fasted-state simulated gastric fluid (FaSSGF) increased the extent of crystallinty in dissolution media upto 86.50%. However, CBZ-D obtained from FaSSGF showed highest solubility of 335.36 ± 4.813 mg/L and dissolution of 36.74% in 60 min. This may be due to presence of surfactant on the surface of CBZ-D. The linear correlation was established between pH of simulated gastrointestinal fluids and percentage relative crystallinty with a correlation coefficient of 0.9904. CBZ form I had a better dissolution profile than any of the other polymorphs. Stabilization of CBZ form I in in vitro and in vivo conditions using pharmaceutical polymers in dosage form may bring better clinical outcomes than present-day therapies.