Feasibility of using low-cost, byproduct materials as sorbents to remove heavy metals from aqueous solutions

This work investigates the sorption of heavy metals by low-cost, byproducts such as charcoal fines (CF), waste green sand, and rice husk ash, in order to examine the feasibility of their use as alternative filter materials for metal-contaminated waters. The sorption of Cd, Cu, Pb, and Zn was investigated in batch experiments and sorption isotherms were constructed. The three byproducts showed high metal removal efficiencies (>95%, regardless of the metal concentration tested). The highest metal sorption distribution coefficients were obtained for CF, with maximum values within the 10⁵-10⁶ L kg^-1 range for all the target metals. The sorption isotherms were satisfactorily fitted using the Freundlich equation and a linear model, the latter only being valid for initial metal concentrations lower than 0.4 mmol L^-1. Sorption reversibility was very low, with desorption yields lower than 2% and desorption distribution coefficients often higher than 10⁶ L kg^-1. The values of the sorption and desorption parameters indicated that the use of these materials, especially CF, could constitute a low-cost alternative for the remediation of contaminated waters.

Evaluation of the interactions between chitosan and humics in media for the controlled release of nitrogen fertilizer

The aim of this study was to evaluate the interactions of peat, humic acids, and humin with urea dispersed in chitosan, in systems intended for the controlled release of urea. Spheres of chitosan with humic material and urea intentionally added to the media were prepared and characterized by means of elemental analysis (CHN), electron paramagnetic resonance (EPR), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). The spheres possessed functional groups related to humic substances that interacted with the chitosan, and the presence of urea in the media was also confirmed after it has been added. Release experiments demonstrated that the samples released urea in a controlled manner that was dependent on pH, increasing in the order: pH 2.5 < pH 4.0 < pH 9.0. In soil experiments, the degree of release of urea (α) increased over time, with values of 0.44 for chitosan-humic acids-urea (CHAU), 0.48 for chitosan-peat-urea (CPTU), and 0.67 for chitosan-humin-urea (CHMU) obtained in the first day of the experiment. The release of urea did not exceed 70% after 7 days. The results demonstrated the potential of using peat, humic acids, and humin, in combination with chitosan, in order to manufacture controlled release urea fertilizers and contribute to reducing adverse environmental and economic impacts.

Removal of Cd, Cu, Pb, and Zn from aqueous solutions by biochars

Sorption and desorption of heavy metals (Cd, Cu, Pb, and Zn) was evaluated in biochars derived from sugarcane bagasse (SB), eucalyptus forest residues (CE), castor meal (CM), green coconut pericarp (PC), and water hyacinth (WH) as candidate materials for the treatment of contaminated waters and soils. Solid-liquid distribution coefficients depended strongly on the initial metal concentration, with K d,max values mostly within the range 10(3)-10(4) L kg(-1). For all biochars, up to 95 % removal of all the target metals from water was achieved. The WH biochar showed the highest K d,max values for all the metals, especially Cd and Zn, followed by CE (for Cd and Pb) and PC (for Cd, Pb, and Zn). Sorption data were fitted satisfactorily with Freundlich and linear models (in the latter case, for the low concentration range). The sorption appeared to be controlled by cationic exchange, together with specific surface complexation at low metal concentrations. The low desorption yields, generally less than 5 %, confirmed that the sorption process was largely irreversible and that the biochars could potentially be used in decontamination applications.