Chiral self-propulsion of growing bacterial macrofibers on a solid surface

Supercoiling motions that accompany the growth of bacterial macrofibers (multicellular filamentous structures formed in B. subtilis by cell division without separation) are responsible for rolling, pivoting, and walking of fibers on a surface. Fibers possess a fulcrum about which they pivot and step in a chiral manner; forces and torques associated with cell growth, when blocked by friction, result in self-propulsion. The elastic engine that drives macrofiber motions generates torques estimated as microdyn cm and femtowatts of power; optical trapping studies yield a first direct measurement of the Young's modulus of the bacterial cell wall, the engine's "working fluid," of ca. 0.05 GPa.

A new mathematical approach predicts individual cell growth behavior using bacterial population information

A theoretical methodology has been developed for studying the growth kinetics of bacterial cells. It utilizes the steady-state cell length distribution in a bacterial population to predict the dependency of growth and division rates on cell length and age. The mathematical model has been applied to the analysis of two bacterial populations, a wild-type strain of Bacillus subtilis, and a minicell-producing strain that carries the divIVB1 mutation. The results show that our model describes the wild-type population very well and that the assumptions typically used in traditional methods are unrealistic. In the case of the minicell-producing mutant we find evidence that the rate of cell division must be a function not only of cell size but also of cell age.

Control-parameter-dependent Swift-Hohenberg equation as a model for bioconvection patterns

We consider a complex Swift-Hohenberg equation with control-parameter-dependent coefficients and use it as a model to describe dynamical features seen in an experimental bacterial bioconvection pattern. In particular, we give numerical results showing the development of a phase-unstable pattern behind a moving front.

Organized cell swimming motions in Bacillus subtilis colonies: patterns of short-lived whirls and jets

The swimming motions of cells within Bacillus subtilis colonies, as well as the associated fluid flows, were analyzed from video films produced during colony growth and expansion on wet agar surfaces. Individual cells in very wet dense populations moved at rates between 76 and 116 microm/s. Swimming cells were organized into patterns of whirls, each approximately 1,000 microm2, and jets of about 95 by 12 microm. Whirls and jets were short-lived, lasting only about 0.25 s. Patterns within given areas constantly repeated with a periodicity of approximately 1 s. Whirls of a given direction became disorganized and then re-formed, usually into whirls moving in the opposite direction. Pattern elements were also organized with respect to one another in the colony. Neighboring whirls usually turned in opposite directions. This correlation decreased as a function of distance between whirls. Fluid flows associated with whirls and jets were measured by observing the movement of marker latex spheres added to colonies. The average velocity of markers traveling in whirls was 19 microm/s, whereas those traveling in jets moved at 27 microm/s. The paths followed by markers were aligned with the direction of cell motion, suggesting that cells create flows moving with them into whirls and along jets. When colonies became dry, swimming motions ceased except in regions close to the periphery and in isolated islands where cells traveled in slow whirls at about 4 microm/s. The addition of water resulted in immediate though transient rapid swimming (> 80 microm/s) in characteristic whirl and jet patterns. The rate of swimming decreased to 13 microm/s within 2 min, however, as the water diffused into the agar. Organized swimming patterns were nevertheless preserved throughout this period. These findings show that cell swimming in colonies is highly organized.

A complex pattern of traveling stripes is produced by swimming cells of Bacillus subtilis

Motile cells of Bacillus subtilis inadvertently escaped from the surface of an agar disk that was surrounded by a fluid growth medium and formed a migrating population in the fluid. When viewed from above, the population appeared as a cloud advancing unidirectionally into the fresh medium. The cell population became spontaneously organized into a series of stripes in a region behind the advancing cloud front. The number of stripes increased progressively until a saturation value of stripe density per unit area was reached. New stripes arose at a fixed distance behind the cloud front and also between stripes. The spacing between stripes underwent changes with time as stripes migrated towards and away from the cloud front. The global pattern appeared to be stretched by the advancing cloud front. At a time corresponding to approximately two cell doublings after pattern formation, the pattern decayed, suggesting that there is a maximum number of cells that can be maintained within the pattern. Stripes appear to consist of high concentrations of cells organized in sinking columns that are part of a bioconvection system. Their behavior reveals an interplay between bacterial swimming, bioconvection-driven fluid motion, and cell concentration. A mathematical model that reproduces the development and dynamics of the stripe pattern has been developed.

Patterns of reporter gene expression in the phase diagram of Bacillus subtilis colony forms

Factors governing the morphogenesis of Bacillus subtilis colonies as well as the spatial-temporal pattern of expression of a reporter gene during colony development were examined by systematically varying the initial nutrient levels and agar concentrations (wetness), the relative humidity throughout incubation, and the genotype of the inoculum. A relationship between colony form and reporter gene expression pattern was found, indicating that cells respond to local signals during colony development as well as global conditions. The most complex colony forms were produced by motile strains grown under specific conditions such that cells could swim within the colony but not swarm outward uniformly from the colony periphery. The wetness of the growth environment was found to be a critical factor. Complex colonies consisted of structures produced by growth of finger-like projections that expanded outward a finite distance before giving rise to a successive round of fingers that behaved in a similar fashion. Finger tip expansion occurred when groups of cells penetrated the peripheral boundary. Although surfactin production was found to influence similar colony forms in other B. subtilis strains, the strains used here to study reporter gene expression do not produce it. The temporal expression of a reporter gene during morphogenesis of complex colonies by motile strains such as M18 was investigated. Expression arose first in cells located at the tips of fingers that were no longer expanding. The final expression pattern obtained reflects the developmental history of the colony.

Mechanics of bacterial macrofiber initiation

The twisting and writhing during growth of single-cell filaments of Bacillus subtilis which lead to macrofiber formation was studied in both left- and right-handed forms of strains FJ7 and RHX. Filament bending, touching, and loop formation (folding), followed by winding up into a double-strand fiber, were documented. Subsequent folds that produced multistrandedness were also examined. The rate of loop rotation during winding up was measured for 26 loops from 16 clones. In most cases, the first loop formed turned at a lower rate than those produced by the following cycles of folding. The sequence of folding topologies differed in FJ7 and RHX strains and in left- versus right-handed structures. Right-handed FJ7 routinely gave rise to four-stranded helices at the second fold, whereas left-handed FJ7 and both left-handed and right-handed forms of RHX made structures with predominantly two double-stranded helical regions. Left-handed RHX structures frequently produced second folds within the initial loop itself, resulting in T- or Y-shaped fibers. Sixteen cases in which the initial touch of a filament to itself produced a loop that snapped open before it could wind up into a double-strand fiber were found. The snap motions were used to obtain estimates of the forces generated by helical growth of single filaments and to investigate theoretical models involving the material properties of cell filaments. In general, the mechanical behavior of growing single-cell filaments and fibers consisting of two-, three-, or four-strand helices was similar to that described for larger, mature, multifilament macrofibers. The behavior of multicellular macrofibers can be understood, therefore, in terms of individual cell growth.

Patterns of gene expression in Bacillus subtilis colonies

Bacillus subtilis 5:7, a derivative of macrofiber-producing strain FJ7, carries the lacZ reporter gene within Tn917 at an unknown location in the host genome. Expression of the host gene carrying lacZ within colonies of 5:7 was observed by examining growth under different conditions in the presence of 5-bromo-4-chloro-3-indolyl-beta-D-galactopyranoside (X-Gal). At a high plating density small colonies arose that expressed the host gene early and throughout the colony, whereas at a low density large colonies were produced that expressed the host gene late in development and only in cells forming a ring pattern close to the colony periphery. A highly regulated spatial and temporal gene expression pattern was observed in growth from cross-streaks, suggesting that gene expression is responsive to concentration gradient fields established by neighboring growth. Colonies cultured on agar blocks revealed that expression was governed by depletion of a medium component and also by the geometry of the substrate upon which the colonies grew. At least three factors influenced the control of expression: (i) the concentration of a diffusible component of the medium exhausted by cell growth, (ii) a spatial-temporal factor related to growth within the colony, and (iii) the geometry of the growth substrate.

Production and initial characterization of bionites: materials formed on a bacterial backbone

The addition of soluble metal salts of calcium, iron, or copper to cultures of Bacillus subtilis grown in web form nucleated precipitation at the surface of the bacterial cell walls. The mineralized cell filaments can be drawn into a fiber that when dried consists of a bacterial thread backbone carrying an inorganic solid. The ratios of organic to inorganic components (by weight) in the stiff brittle materials, called bionites, were: 1.08 for fe(2)bactonite, 1.8 for calbactonite, 2.3 for fe(3)bactonite, and 5 for cu(2)bactonite. X-ray photoelectron spectra suggest that the fe(3)bactonite contains Fe2O3, that calbactonite contains calcium carbonate, and that cu(2)bactonite contains CuCl (Cu I). Acid-base reactions of the bionites are compatible with these identifications. Burning out the organic phase of the febactonites yields a black magnetic material, presumably magnetite. The burnt cubactonite appears to yield elemental Cu(s). Calbactonite upon hydration was able to retain a genetically engineered enzymatic activity.

Mechanical properties of peptidoglycan as determined from bacterial thread

Experiments are described in which the tensile strength, the extensibility and the initial Young's modulus of bacterial cell wall have been determined as functions of relative humidity in the range 11-98%. Data on stress relaxation and recovery are also given. Standard fibre-measuring technique has been used on 'bacterial thread', made from a cell-separation-suppressed mutant of Bacillus subtilis. The data show that peptidoglycan, the load bearing polymer in the cell wall, behaves very much like other viscoelastic polymers. Its mechanical behaviour when dry is that of a glassy polymer with tensile strength about 300 MPa and modulus about 20 GPa. When wet, it is weaker and much less stiff with tensile strength about 3 M Pa and modulus 10 M Pa. The relaxation data indicate a wide spectrum of relaxation times. The results are discussed in terms of the structure of peptidoglycan and its orientation in the bacterial cell wall. The way in which mechanical behaviour depends strongly on humidity is compared with that of other biopolymers in terms of possible hydrogen-bond density and the ordering of water molecules. The possibility of a well-defined glass transition is briefly examined.

Cell wall mechanical properties as measured with bacterial thread made from Bacillus subtilis

Engineering approaches used in the study of textile fibers have been applied to the measurement of mechanical properties of bacterial cell walls by using the Bacillus subtilis bacterial thread system. Improved methods have been developed for the production of thread and for measuring its mechanical properties. The best specimens of thread produced from cultures of strain FJ7 grown in TB medium at 20 degrees C varied in diameter by a factor of 1.09 over a 30-mm thread length. The stress-strain behavior of cell walls was determined over the range of relative humidities between 11 and 98%. Measurements of over 125 specimens indicated that cell wall behaved like other viscoelastic polymers, both natural and man-made, exhibiting relaxation under constant elongation and recovery upon load removal. This kinetic behavior and also the cell wall strength depended greatly on humidity. The recovery from extension observed after loading even up to a substantial fraction of the breaking load indicated that the properties measured were those of cell wall material rather than of behavior of the thread assemblage. Control experiments showed that neither drying of thread nor the length of time it remained dry before testing influenced the mechanical properties of the cell walls. Specimens drawn from TB medium and then washed in water and redrawn were found to be stiffer and stronger than controls not washed. However, tensile properties were not changed by exposure of cells to lysozyme before thread production. This suggests that glycan backbones are not arranged along the length of the cell cylinder. The strength of the cell wall in vivo was estimated by extrapolation to 100% relative humidity to be about 3 N/mm2. Walls of this strength would be able to bear a turgor pressure of 6 atm (ca. 607.8 kPa), but if the increase in strength of water-washed threads was appropriate, the figure could be 24 atm (ca. 2,431.2 kPa).

Regulation of Bacillus subtilis macrofiber twist development by D-alanine

Twist states of Bacillus subtilis macrofibers were found to vary as a function of the concentration of D-alanine in the medium during growth. L-Alanine in the same concentration range had no effect. Increasing concentrations of D-alanine resulted in structures progressively more right-handed (or less left-handed). All strains examined in this study, including mutants fixed in the left-hand domain as a function of temperature, responded to D-alanine in the same way. All twist states from tight left- to tight right-handedness could be achieved solely by varying the D-alanine concentration. The D-alanine-requiring macrofiber strain 2C8, which carries a genetic defect (dal-1) in the alanine racemase, behaved in a similar fashion. The combined effects of D-alanine and ammonium sulfate (a factor known to influence macrofiber twist development in the leftward direction) were examined by using both strains able to undergo temperature-induced helix hand inversion and others incapable of doing so. In all cases, the effects of D-alanine predominated. A synergism was found in which increasing the concentration of ammonium sulfate in the presence of D-alanine enhanced the right-factor activity of the latter. A D-alanine pulse protocol provided evidence that structures undergo a transient inversion indicative of "memory." Chloramphenicol treatment inhibited the establishment of memory in the D-alanine-induced right to left inversion, supporting the existence of a "left twist protein(s)" that is required for the attainment of left-handed twist states. Chemical analysis of cell walls obtained from right- and left-handed macrofibers produced in the presence and absence of D-alanine, respectively, failed to reveal twist state-specific differences in the overall composition of either peptidoglycan or wall teichoic acids.

Regulation of Bacillus subtilis macrofiber twist development by D-cycloserine

The effect of D-cycloserine on the establishment of twist states in Bacillus subtilis macrofibers was examined. Macrofibers produced in the presence of the drug differed in twist compared with those produced in its absence. The degree of twist alteration was dependent on the concentration of D-cycloserine in the growth medium. Macrofibers of different twist states representative of the entire twist spectrum from tight left-handedness to tight right-handedness were produced in strains FJ7 and C6D in four different ways: by control of the concentration of D-alanine, magnesium sulfate, or ammonium sulfate in the growth medium or by control of the growth temperature. The structures so produced were used to determine the effect of D-cycloserine on twist establishment starting from different twist states throughout the twist spectrum. In all but one case, twist resulting from growth in the presence of D-cycloserine was further towards the left-hand end of the twist spectrum than that produced in its absence, the exception being the unusual left-handed twist states produced in strains C6D and the closely related RHX 11S at high D-alanine concentrations described here. Studies of the interaction between D-cycloserine and D-alanine both used alone and used independently with the other twist-modifying systems (temperature, magnesium sulfate, and ammonium sulfate) revealed that changes in twist resulting from D-cycloserine were always in the opposite direction from those resulting from D-alanine. This antagonism suggests that the biochemical mechanism of twist regulation involves the metabolism of peptidoglycan, particularly reactions involving D-alanine or the dipeptide D-alanyl-D-alanine. This antagonism suggests that the biochemical mechanism of twist regulation involves the metabolism of peptidoglycan, particularly reactions involving D-alanine or the dipeptide D-alanyl-D-alanine. The possibility that peptidoglycan cross-linking is involved is discussed.

Helix hand fidelity in Bacillus subtilis macrofibers after spheroplast regeneration

Left- and right-handed Bacillus subtilis macrofibers produced by strains FJ7 and C6D were converted to spheroplasts. Intact cells were regenerated and macrofibers were produced under conditions conducive for production of left- and right-handed structures. The resulting helix hand phenotypes always corresponded to those expected on the basis of the parental genotype.

Characterization of nutrition-induced helix hand inversion of Bacillus subtilis macrofibers

The kinetics of Bacillus subtilis macrofiber helix hand inversion was examined. Inversion was induced by transfer of structures produced in one medium to another medium. When cultured at 20 degrees C in either medium, the doubling time was approximately 100 min. To establish a baseline, the macrofiber twist state produced in one medium was measured over the same time course during which other macrofibers underwent inversion after transfer to a second medium. The baseline was used to identify the time of inversion initiation: the point at which curves representing changes of twist as a function of time after transfer to the new medium intersected the baseline. Right- and left-handed macrofibers of different twists were produced by growth in mixtures of TB and S1 media. These were used to determine the influence of initial twist on the time course of inversion initiation. In the right to left inversion, a positive correlation was found between initial twist and the time of inversion initiation. The left to right inversion differed, however, in that a constant time was required for inversion initiation regardless of the starting left-handed twist. When a nutritional pulse was administered by transferring fibers from TB to S1 to TB medium, the time to initiation of inversion was found to decrease with incubation of increasing duration in S1 medium. A similar pulse protocol was used in conjunction with inhibitors to examine the protein and peptidoglycan synthesis requirements for the establishment of nutrition-induced memory that leads to initiation of inversion. Nutritionally induced right to left inversion but not left to right inversion required protein synthesis. The addition of trypsin to left-handed macrofibers apparently required, as described previously for the temperature-regulated twist system (D. Favre, D. Karamata, and N. H. Mendelson, J. Bacteriol. 164:1141-1145, 1985), for the production of left-handed twist states in the nutrition system.

Regulation of Bacillus subtilis macrofiber twist development by ions: effects of magnesium and ammonium

The steady-state twist of Bacillus subtilis macrofibers produced by growth in complex medium was found to vary as a function of the magnesium and ammonium concentrations. Four categories of macrofiber-producing strains that differed in their response to temperature regulation of twist were studied. Macrofibers were cultured in the complex medium TB used in previous experiments and in two derivative media, T (consisting of Bacto Tryptose), in which most strains produced left-handed structures, and Be (consisting of Bacto Beef Extract), in which right-handed macrofibers arose. In nearly all cases, increasing concentrations of magnesium led to the production of macrofibers with greater right-handed twist. Some strains unable to form right-handed structures as a function of temperature could be made to do so by the addition of magnesium. Inversion from right- to left-handedness in strain FJ7 induced by temperature shift-up was blocked by the addition of magnesium. The presence of magnesium during a high-temperature pulse did not block the establishment of "memory," although it delayed the initiation of the transient inversion following return to low temperature. The twist state of macrofibers grown without a magnesium supplement was not instantaneously affected by the addition of magnesium. Such fibers were, however, protected from lysozyme attack and associated relaxation motions. Lysozyme degradation of purified cell walls (both intact and lacking teichoic acid) was also blocked by the addition of magnesium. Ammonium ions influenced macrofiber twist development towards the left-hand end of the twist spectrum. Macrofiber twist produced in mixtures of magnesium and ammonium was strain and medium dependent.(ABSTRACT TRUNCATED AT 250 WORDS)

Relaxation motions induced in Bacillus subtilis macrofibres by cleavage of peptidoglycan

Bacillus subtilis macrofibres exposed to lysozyme underwent characteristic rotations, termed relaxation motions, in which their twist changed. Intact macrofibres and macrofibre fragments devoid of loop ends responded in the same way. Macrofibre strains for which the helix hand is temperature-dependent and also those of fixed-hand (both left and right) underwent initial relaxation motions towards the right-hand end of the twist spectrum, the only exception being those in which the initial twist state was at or near the right-hand maximum. Often when the initial relaxation motions were completed immediately before structure breakdown the macrofibres underwent one or a few rotations in the opposite direction (towards the left-hand end of the twist spectrum). Crude autolysin extract obtained from wild-type B. subtilis also caused macrofibre relaxation motions at pH 5.6 but at pH 8.0 macrofibre breakdown occurred as a result of septal cleavage. This resulted in the release of helically shaped individual cellular filaments. These findings suggest that strain in the cell wall associated with helical shape was dependent on the integrity of the glycan backbone rather than peptide cross-bridges. In contrast, cleavage of peptide cross-bridges apparently was instrumental in the cell separation process. Left- and right-hand macrofibres, when exposed to lysozyme, exhibited different rates of relaxation, breakdown of fibre structure and protoplast formation. Similarly, the rate of macrofibre breakdown during the lag between temperature shift and inversion reflected the replacement of septal wall material by that of a new conformation corresponding to the new helix hand.(ABSTRACT TRUNCATED AT 250 WORDS)

Temperature-pulse-induced "memory" in Bacillus subtilis macrofibers and a role for protein(s) in the left-handed-twist state

Macrofibers in steady-state growth at one temperature were subjected to pulses of various durations at a temperature at which the opposite helix hand would form and then returned to the initial temperature. In an upshift pulse (20 to 48 degrees C), at least 3 min of incubation was required to induce a transient inversion that occurred later after return to 20 degrees C. Longer pulses resulted in shorter delays in onset of the transient inversion. This "memory" of a brief high-temperature pulse suggests that even a small amount of material can influence the twist of the entire macrofiber. Similar results were found for temperature downshift pulses corresponding to the opposite inversion. Adding chloramphenicol during the temperature pulse blocked the establishment of memory associated with the right-to-left inversion but not that associated with left-to-right inversion. In contrast, inhibiting peptidoglycan synthesis with D-cycloserine during the temperature pulse did not prevent establishment of memory. Inhibiting protein synthesis in mutants fixed as left-handed structures over the entire temperature range induced conversion to right-handedness but did not affect mutants fixed as right-handed structures. Adding protease to either live or formaldehyde-killed macrofibers always induced rotations of right-handed orientation. Steady-state growth in the presence of protease was found to shift the initial macrofiber twist towards the right-hand end of the twist spectrum. The phenomenon was observed in several mutants with different initial twists.

Kinetic studies of temperature-induced helix hand inversion in Bacillus subtilis macrofibers

The inversion of Bacillus subtilis macrofibers from right to left handedness induced by a temperature upshift was compared with inversion from left to right handedness induced by a temperature downshift. Following an upshift the new steady-state growth rate was achieved prior to inversion of helix orientation. There was no discernible perturbation of growth rate at the time of inversion. The time required after a temperature shift up or down for fiber rotation in the original sense to cease was dependent on the temperature to which the fibers were transferred and was always shortest when this temperature was highest. The results suggest a basic asymmetry in the two inversion processes. Cessation of rotation in the right-to-left inversion appeared to reflect contributions of the old and new wall materials that depended on their twist values, whereas the left-to-right inversion appeared to require that a specific amount of newly made wall material be inserted into the cell surface. The degree of twist of the newly inserted right-handed material appeared not to influence the timing of inversion.

Biomechanics of bacterial walls: studies of bacterial thread made from Bacillus subtilis

Bacterial threads of up to 1 m in length have been produced from filaments of separation-suppressed mutants of Bacillus subtilis. Individual threads may contain 20,000 cellular filaments in parallel alignment. The tensile properties of bacterial threads have been examined by using conventional textile engineering techniques. The kinetics of elongation at constant load are indicative of a viscoelastic material. Both Young's modulus and breaking stress are highly dependent upon relative humidity. By extrapolation to 100% relative humidity, it appears that cell walls may be able to bear only internal osmotic pressures of about 2 atmospheres (2.03 X 105(5) Pa) in living cells. Similarly, the strength of wall material limits the amount of cell-surface charge permissible to only a small fraction of that known to be carried by the negatively charged wall polymers.

A model of bacterial DNA segregation based upon helical geometry

A new mechanism to segregate daughter genomes in bacterial cells is suggested that is based upon the rules of geometry governing the helix clock (Mendelson, 1982a). The reorientation of cell surface string arrays used as a timing reference in the helix clock is capable of drawing apart the initial products of DNA replication. Physically linking the sister DNA replication origins to the ends of the initial cell surface string inserted into the cell surface at the start of a helix clock cycle, and linking the DNA terminus to a point along the length of the same string provides a means to mark the locations to which the genomes will segregate as well as the place where cell division will occur. The parallel packing of additional cell surface strings into an array which includes the string to which DNA is attached provides the necessary spatial rearrangements. The helical segregation model can account for the precise registration of cell divisions with the completion of replication forks in a multifork replication system, provides a basis for determining the relationship of sister cell sizes at division, and can also accommodate the asymmetrical divisions associated with minicell production and sporulation. Examination of the helical segregation theory under multifork DNA replication conditions moreover reveals that adjacent helical clocks are physically linked to one another although totally independent in terms of their progression through the clock cycle. A relationship between the initiation of DNA replication forks and the insertion of the first cell surface string associated with the start of a helix clock cycle is predicted by the model.

Factors contributing to helical shape determination and maintenance in Bacillus subtilis macrofibres

Bacillus subtilis, normally a rod-shaped organism, can grow in the form of a helix with pitch ranging over a spectrum from tight right-handed to tight left-handed depending upon the growth environment and genetic composition of the strain. Five factors have been identified which contribute either to the helical shape deformation or its maintenance: 1) a biomechanical component involving blocked rotation during growth; 2) cell wall polymer conformation; 3) a protein(s) concerned with the left-hand form produced at high temperature; 4) electrostatic aspects of the cell wall; and 5) water, as it affects the mechanical properties of cell walls and the structure of cell wall polymers. The findings are compatible with a model in which the cell wall polymers are inserted in helical orientation along the cylindrical portion of the cell during growth.

Identification of mutations associated with macrofiber formation in Bacillus subtilis

A search was made for the genes responsible for the production of helical macrofibers in the original collection of macrofiber-producing strains of B. subtilis. Two loci were identified: fibA, located between hisA and tag-1, and fibB, linked to cysB. fibA governs a short-lived division suppression phenomenon associated with the production of rudimentary fibers, whereas fibB appears to be responsible for a persistent division suppression and a more highly organized helical macrofiber. Both mutations are recovered from each of the original macrofiber-producing strains which also carried the div IV-B1 mutation responsible for minicell production. The latter mutation by itself is not sufficient, however, for the production of macrofibers. Other known mutations leading to division suppression that map in the same region are shown not to be allelic to fibA or fibB. Neither fib locus appears to be responsible for helix hand determination.

Helical macrofiber formation in Bacillus subtilis: inhibition by penicillin G

The folding process required for helical macrofiber formation after the outgrowth of Bacillus subtilis spores was found to be blocked by very low concentrations of penicillin G (1 to 3 ng/ml). Under such conditions, growth and septation without cell separation resulted in characteristic disorganized multicellular structures. Higher concentrations (4 and 10 ng/ml) were needed to inhibit spore outgrowth and vegetative growth, respectively.

Twisted states of Bacillus subtilis macrofibers reflect structural states of the cell wall

Static and dynamic studies of helical Bacillus subtilis macrofibers reveal that a spectrum of twisted states exists ranging from tight left-handed structures with twist equal to approximately equal to 40 left turns per mm to tight right-handed structures with twist equal to 57 right turns per mm. In the lytic-deficient strain FJ7 , twist varies as a function of growth temperature above or below 39 degrees C, where there is zero twist. The relationship between the temperature (below 39 degrees C) at which right-hand structures are produced to the time it takes for them to begin the inversion process in which they become left-handed following transfer to 48 degrees C reveals that structures with less twist are more rapidly converted to left-handedness than are those with higher values of twist. The initial response of live macrofibers to digestion by lysozyme consists of "relaxation" motions in which the twist of both left- and right-handed structures changes towards the right-hand end of the spectrum. The rate of relaxation is approximately equal to 5-fold higher at the left-hand end than at the right-hand end. These findings suggest that cell wall polymers can assume a range of structural states during helical growth and that these determine the quantitative aspects of macrofiber shape as well as the sensitivity of walls to attack by lysozyme.

Morphological and genetic characterization of a bacteriophage-resistant Bacillus subtilis macrofiber-producing strain

Bacillus subtilis C6 phi R4 is an SPO1-resistant derivative of strain C6D, a left-hand macrofiber-producing strain described previously (N. H. Mendelson, Proc. Natl. Acad. Sci. U.S.A. 75:2478-2482, 1978). In addition to the phage resistance property, strain C6 phi R4 differs from its parent in macrofiber organization and formation of aggregates in liquid shake cultures. The phage resistance mutation was located in the gtaC gene. The macrofiber organization and aggregation phenotypes also appear to be controlled by the gtaC locus. Strains constructed by introduction of the gtaC mutation into C6D appear to be identical to the original C6 phi R4 strain in all phenotypic properties. In contrast, other constructs carrying either gtaA or gtaB that are resistant to SPO1 do not display the characteristic C6 phi R4 morphological phenotypes.

Bacterial growth and division: genes, structures, forces, and clocks

Images

Inversion of helix orientation in Bacillus subtilis macrofibers

The ability of helical macrofibers of Bacillus subtilis to convert from left- to right-handed structures or vice versa has been known to be controlled by the nutritional environment (N. H. Mendelson, Proc. Natl. Acad. Sci. U.S.A., 75:2478-2482, 1978). lyt mutants (Ni15, FJ3, FJ6, and FJ7) and also lyt phenocopies of wild-type strain FJ8 were able to undergo helix hand inversion as a function of temperature. The transition between right- and left-handed structures was in a very narrow range (about 2.5 degrees C) in the low to mid-40 degrees C. The helix orientation of these strains was also influenced by the concentration of divalent ions. Macrofiber handedness is governed, therefore, by at least four factors: genetic composition, temperature, and nutritional and ionic environments. Conditions normally used for growth fall, within this matrix, in the region favoring right-handed structures. Inhibition studies suggest that cell growth must occur for helix hand inversion.

Dynamics of Bacillus subtilis helical macrofiber morphogenesis: writhing, folding, close packing, and contraction

Helical Bacillus subtilis macrofibers are highly ordered structures consisting of individual cells packed in a geometry remarkably similar to that found in helically twisted yarns (G. A. Carnaby, in J. W. S. Hearle et al., ed., The Mechanics of Flexible Fibre Assemblies, p. 99-112, 1980; N. H. Mendelson, Proc. Natl. Acad. Sci. U.S.A. 75:2478-2482, 1978). The growth and formation of macrofibers were studied with time-lapse microscopy methods. The basic growth mode consisted of fiber elongation, folding, and the helical wrapping together of the folded portion into a tight helical fiber. This sequence was reiterated at both ends of the structure, resulting in terminal loops. Macrofiber growth was accompanied by the helical turning of the structure along its long axis. Right-handed structures turned clockwise and left-handed ones turned counterclockwise when viewed along the length of a fiber looking toward a loop end. Helical turning forced the individual cellular filaments into a close-packing arrangement during growth. Tension was evident within the structures and they writhed as they elongated. Tension was relieved by folding, which occurred when writhing became so violent that the structure touched itself, forming a loop. When the multistranded structure produced by repeated folding cycles became too rigid for additional folding, the morphogenesis of a ball-like structure began. The dynamics of helical macrofiber formation was interpreted in terms of stress-strain deformations. In view of the similarities between macrofiber structures and those found in multifilament yarns and cables, the physics of helical macrofiber structure and also growth may be suitable for analysis developed in these fields concerning the mechanics of flexible fiber assemblies (C. P. Buckley; J. W. S. Hearle; and J. J. Thwaites, in J. W. S. Hearle et al., ed., The Mechanics of Flexible Fibre Assemblies, p. 1-97, 1980).

Clockwise and counterclockwise pinwheel colony morphologies of Bacillus subtilis are correlated with the helix hand of the strain

Helical macrofiber-producing strains of Bacillus subtilis grown on fresh complex medium semisolid surfaces formed "pinwheel"-shaped colonies. Clockwise pinwheel projections arose from colonies of strains that produce right-handed helical macrofibers in fluid cultures. Most strains able to make left-handed helical macrofibers in fluid grew as disorganized wavy colonies without directed projections. A phage-resistant left-handed mutant was found that produces very tight colonies with pinwheel projections that lie counterclockwise relative to the colony. The pinwheel colony morphology is interpreted therefore in terms of the cell surface organization and helical growth.

Helical Bacillus subtilis macrofibers: morphogenesis of a bacterial multicellular macroorganism

Helical bacterial macroorganisms have been produced by the selection of appropriate Bacillus subtilis mutants and the establishment of specific growth conditions. Threadlike fibers ranging in length to approximately 1 cm are produced in fluid culture by the parallel association of many division-suppressed filaments in helical arrangement. A more open ball-like structure of complicated woven architecture may also be produced. Macrostructure morphology is regulated by genetic, physiological, and nutritional factors. The pitch angle of surface filaments in helical macrofibers varies as a function of macrofiber diameter, indicating a flexible response of individual cell surfaces to the forces responsible for helical morphology. Three classes of mutants have been obtained that are concerned with helix directionality: (i) mutants that form only left-handed helix macrofibers, (ii) mutants that form only right-handed helix macrofibers, and (iii) conditional mutants able to form either left- or right-handed helix macrofibers depending upon nutritional environment. Aggregate structures containing both left- and right-handed macrofibers have been obtained by coculturing appropriate mutants. In addition to providing information on the organization of the bacterial cell surface, this new system offers unique and unusual opportunities to study cell-cell interactions, primitive morphogenesis, and the properties of a multicellular bacterial form.

Characterization of a combined DNA initiation and cell division mutant of Bacillus subtilis

The temperature-sensitive mutation in Bacillus subtilis 168-134ts, a conditional lethal DNA initiation mutant, was transferred to the minicell producing strain, CU 403 div IV-B1, to study he relationship of DNA synthesis to cell division. Markers in the combined mutant were verified by transduction. DNA replication kinetics, genome location by autoradiography, and clonal analysis of cell division patterns during spore outgrowths were investigated. Growth of the double mutant at the restrictive temperature results in an impressive reduction of the percentage cell length covered by DNA grain clusters (60.2% at 30 degrees C compared to 8.6% after 2 h at 45 degress C). The probability of a minicell producing division in double mutant clones is essentially the same at 30 degrees C and during the initial 2-3 h growth at 45 degrees C at which time lysis begins. Residual division at 45 degrees C is attributable to processes initiated at 30 degrees C. The CU 403 div IV-B1, 134ts, double mutant divides about 25% as frequently relative to growth as do wild type CU 403 clones when incubated at permissive temperature. This is approximately 15% greater division suppression than previously found in the CU 403 div IV-B1 mutant strain, and is presumably due to interactions of the mutant gene products both of which affect DNA.

Cellular organization of Bacillus subtilis: sodium dodecyl sulfate-induced cell partitioning into zebra structures

Cells of Bacillus subtilis heated in high concentrations of sodium dodecyl sulfate (5%) and then washed free of detergent with a hot salt solution (80 C) become structurally reorganized into regions of densely compacted cytoplasm (termed zebras) and regions of sparsely filled material (termed spaces). Size distribution studies of zebras indicate that division-suppressed mutants and wild-type cells both yield zebras of comparable length. Similarly the lengths of zebras found in populations emerging from spores are uniform in one-, two-, three-, and four-zebra-containing cells. In contrast, the length of spaces is slightly larger than that of zebras and is unusually large in two-zebra-containing cells. The locations of zebras and spaces along cell length have been studied in spore out-growth populations. A statistical procedure developed previously in genome location investigations was used to analyze the location of zebras along cell length. The data indicate that as cells elongate, new sites arise where the cell contents are strongly bound to the cell surface. Within filament populations produced by division-suppressed mutants there is a linear relationship of mean filament length and zebra number per filament. These data indicate that cytoplasm in filaments with no obvious structural compartmentalizations may be organized into units associated with particular regions of cell surface. The attachment of cell contents to the cell surface may involve deoxyribonucleic acid. Zebra-containing cells digested with proteolytic enzyme and ribonuclease are converted to cells that contain a crystalline-like granule fixed at the location of each zebra. Exposure to deoxyribonuclease mobilizes these granules within the cell wall.

Helical growth of Bacillus subtilis: a new model of cell growth

A multiple mutant of Bacillus subtilis that grows in an unusual double-helix morphology was studied. Construction of models led to the assumption that cell surface elongation must proceed in a helical path in this mutant. The observation that all newly formed double-helix clones propagated, after spore outgrowth in fluid culture, consisted of closed-circular structures suggested that double-helix structures are tension-registered forms.

Use of Bacillus subtilis minicells to demonstrate an antigenic relationship between the poles and lateral cylindrical regions of rod-shaped cells

Purified minicells produced by Bacillus subtilis div IV-B1 mutants were used to immunize rabbits. Immune serum was obtained that agglutinated minicells and was able to form precipitin lines when reacted with minicell antigens in double-diffusion or immunoelectrophoretic procedures. Antiminicell serum agglutinated rod-shaped B. subtilis cells to long filaments produced by growth of a cell division-defective mutant at restrictive temperature. These findings indicate that minicells are immunogens capable of eliciting the production of antibodies that cross-react with the lateral, cylindrical regions of B. subtilis rods. It appears, therefore, that poles share a common antigen(s) with cylindrical regions of the cell.

Minicell yield and cell division suppression in Bacillus subtilis mutants

Minicell yield is determined by the probability of a minicell-producing division and the relationship of growth to division in Bacillus subtilis mutants.

Cell division suppression in the Bacillus subtilis div IC-A1 minicell-producing mutant

Growth and division patterns of Bacillus subtilis wild-type (div IV-A1+) and minicell-producing mutant (div IV-A1) clones were studied after spore germination during microcolony development in chambers that facilitate continuous observation with a phase contrast microscope. Data obtained from 13 div IV-A1+ clones were used to derive the equation DE equals [(mum minus 17.6)/8.8], which expresses the relationship of cell divisions present in clones of various lengths. This equation was used to determine the number of divisions expected in div IV-A1 clones if the mutant clones were able to divide as often as wild-type clones. The observed number of divisions present in mutant clones was found to be only 25.27% of the number expected on the basis of this equation. Although individual div IV-A1 clones varied in the percentage of division equivalents expressed, there appeared to be no correlation between the overall clone growth rate and the number of divisions expressed. Culturing div IV-A1+ and div IV-A1 clones together in the same growth chamber revealed that there were no diffusible interactions influencing the division phenotypes of either mutant or wild-type cells. At later stages of growth, mixed microcolonies containing cells of both genotypes were formed. A length analysis of individual cells in these populations indicated that the relative division suppression of mutant compared with wild-type cells characteristic of the initial stages of clone development was maintained. It is likely, therefore, that the excessive length of minicell-producing cells (div IV-A1) is a reflection primarily of division suppression in the mutant and not simply of mislocation of division along cell length.

Physiological influences on cell division patterns in the div IV-B1 MINIcell-producing mutant of Bacillus subtilis

The proportion of abnormal divisions resulting in minicells is influenced by growth stage and medium composition.

Clonal analysis of cell division in the Bacillus subtilis div IV-B1 minicell-producing mutant

Spores of the Bacillus subtilis minicell-producing mutant div IV-B1 were germinated and grown to microcolonies in chambers which facilitate continuous observation of the developing clones with a phase-contrast microscope. Time lapse photographs were taken of 46 clones, covering the period from the beginning of outgrowth until at least two rounds of cell division had been completed. Cell lineages were constructed from contour length measurements of the photographs. These data include cell lengths, division site locations, and cell numbers in clones of various ages. From these data we have determined that the probability of a minicell being produced at any division by the div IV-B1 mutant is 0.31. The location of the abnormal division site which generates the first minicell produced in the outgrowing clone appears to be random with respect to the existing cell poles. In contrast, the location of the second abnormal division site, and hence the second minicell, is not random but rather occurs preferentially in proximity to the first minicell. This clustering of abnormal events suggests that division site location is related to pole age (generations), although other influences on minicell clustering cannot be ruled out at present.

Physiological studies of Bacillus subtilis minicells

Minicells produced by Bacillus subtilis strains carrying the div IV-B1 mutation, (CU 403 div IV-B1 and CU 403 div IV-B1, tag-1), were purified by a procedure which destroys parental cells with ultrasound, but spares minicells. Such preparations generally contain 10(9) or more minicells/ml and less than 10(4) colony-forming units/ml. Purified minicells are resistant to autolysis in tris(hydroxymethyl)aminomethane buffer, pH 7.5, at 30 C, conditions which result in total lysis of parental cells. Minicells are not completely devoid of autolytic activity, however. The medium in which minicells are produced, the temperature at which purified minicells are incubated, and the genotype of cells from which the minicells are derived all influence the rate of autolysis of purified minicells. These parameters are demonstrated by using minicells obtained from div IV-B1 and div IV-B1, tag-1 strains. Ultrastructural differences have been observed in the products of autolysis of these two minicell strains. Minicells are sensitive to low levels of lysozyme and yield miniprotoplasts when the wall is removed in an osmotically protective environment. Although minicells are unable to grow, they can maintain their integrity over long periods of time, which suggests functional energy metabolism in minicells. Direct measurements of adenosine 5'-triphosphate (ATP) levels by the luciferase assay indicated that minicells can produce ATP. Oxygen consumption, measured by standard respirometry techniques, also indicates functional metabolism in minicells. These findings demonstrate that minicells purified by ultrasound are suitable material for study of physiological processes in anucleate cells.

Minicells of Bacillus subtilis: a new bacteriophage-blocking agent

Bacteriophage SP01, SP17, and phi29 rapidly absorb irreversibly to minicells of Bacillus subtilis but do not produce a lytic cycle in minicells.

Minicells of Bacillus subtilis

After nitrosoguanidine (N-methyl-N'-nitro-N-nitrosoguanidine) mutagenesis, two Bacillus subtilis mutants (div IV-A1 and div IV-B1) were isolated that are defective in the location of division site along cell length. Both mutations were transferred into strain CU403 by transformation, and their properties were studied in the CU403 genetic background. Location of divisions in close proximity to cell pole regions in both mutants results in minicell production. Purified minicells contain a ratio of ribonucleic acid to protein comparable to that found in the parent cells. Autoradiographs of (3)H-thymine incorporation into deoxyribonucleic acid (DNA), thymine-2-(14)C incorporation into DNA, electron micrographs, and chemical analyses for DNA all fail to demonstrate DNA in the minicells. Minicells produced by both mutants are highly motile, an indication of functional energy metabolism. Electron micrographs reveal that minicells are produced by a structurally normal division mechanism and that minicells contain a normal cell surface. The div IV-A1 mutation has been mapped by PBS1 transduction linked to ura. The div IV-B1 mutation is closely linked to pheA by both PBS1 transduction and by co-transformation.

Genetic regulation of cell division initiation in Bacillus subtilis

The growth and division properties of a temperature-sensitive mutant of Bacillus subtilis defective in the initiation of cell division have been studied. Log-phase cells transferred from 30 to 45 C continue to increase in length but fail to initiate new divisions. Deoxyribonucleic acid synthesis continues at 45 C, and genomes are segregated along the filament length. When filaments are returned to 30 C, division initiation resumes, and the long multinucleate clones are partitioned into normal-size cells. Occasionally, multiple cross walls initiate in close proximity, resulting in tiny cells, some of which are anucleate. Division resumption is sensitive to protein synthesis inhibitors, suggesting there is a new protein required for the initiation of division in filaments.

Deoxyribonucleic acid distribution in Bacillus subtilis independent of cell elongation

A temperature-sensitive DNA(-) mutant of Bacillus subtilis has been studied during the resumption of deoxyribonucleic acid (DNA) synthesis following a 45 to 30 C temperature shift. For several hours after return to 30 C, DNA synthesis proceeds although the cells fail to elongate appreciably. Autoradiographs of cell populations synthesizing DNA during the recovery period demonstrate that DNA can become distributed to previously unoccupied regions along the cell length. By varying the labeling regime, newly synthesized DNA as well as DNA present at the time of transfer from 45 to 30 C were followed independently. Measurements of the percent of cell length covered by grains ((3)H-thymine in DNA) demonstrate the progressive refilling of DNA-vacant cell regions by both newly synthesized and original DNA. These data indicate that cell surface growth is not an absolute requirement for segregation of bacterial DNA.