Flow injection amperometric uric acid biosensor based on AuNPs-GO-CS porous composite cryogel coated on PB-PEDOT:PSS modified screen-printed carbon electrode

An enzymatic amperometric uric acid (UA) biosensor was successfully developed by modifying a screen-printed carbon electrode (SPCE) with Prussian blue-poly(3,4-ethylene dioxythiophene) polystyrene sulfonate composite (PB-PEDOT:PSS). The modified SPCE was coated with gold nanoparticles-graphene oxide-chitosan composite cryogel (AuNPs-GO-CS cry). Uricase (UOx) was directly immobilized via chemisorption on AuNPs. The nanocomposite was characterized by scanning electron microscopy, transmission electron microscopy, ultraviolet-visible spectroscopy, and Fourier transform infrared spectroscopy. The electrochemical characterization of the modified electrode was performed by cyclic voltammetry and electrochemical impedance spectroscopy. UA was determined using amperometric detection based on the reduction current of PB which was correlated with the amount of H2O2 produced during the enzymatic reaction. Under optimal conditions, the fabricated UA biosensor in a flow injection analysis (FIA) system produced a linear range from 5.0 to 300 μmol L-1 with a detection limit of 1.88 μmol L-1. The proposed sensor was stable for up to 221 cycles of detection and analysis was rapid (2 min), with good reproducibility (RSDs < 2.90 %, n = 6), negligible interferences, and recoveries from 94.0 ± 3.9 to 101.1 ± 2.6 %. The results of UA detection in blood plasma were in agreement with the enzymatic colorimetric method (P > 0.05).

Nano-palladium-decorated bismuth sulfide microspheres on a disposable electrode integrated with smartphone-based electrochemical detection of nitrite in food samples

Nitrite (NO2-) is widely used as an additive to extend the shelf life of food products. Excessive nitrite intake not only causes blood-related diseases but also has the potential risk of causing cancers. A disposable screen-printed electrode was modified with nano‑palladium decorated bismuth sulfide microspheres (nanoPd@Bi2S3MS/SPE), and integrated with a smartphone-interfaced potentiostat to develop a portable, electrochemical nitrite sensor. NanoPd@Bi2S3MS was prepared by the hydrothermal reduction of a Bi2S3MS and Pd2+ dispersion and drop cast on the SPE. The nanoPd@Bi2S3MS/SPE was coupled with a smartphone-controlled portable potentiostat and applied to determine nitrite in food samples. The linear range of the sensor was 0.01-500 μM and the limit of detection was 0.0033 μM. The proposed system showed good repeatability, reproducibility, catalytic stability, and immunity to interferences. The proposed electrode material and a smartphone-based small potentiostat created a simple, portable, fast electrochemical sensing system that accurately measured nitrite in food samples.

A reusable screen-printed carbon electrode-based aptasensor for the determination of chloramphenicol in food and environment samples

An electrochemical aptasensor was developed for the determination of chloramphenicol (CAP) in fresh foods and food products. The aptasensor was developed using Prussian blue (PB) and chitosan (CS) film. PB acts as a redox probe for detection and CS acts as a sorption material. The aptamer (Apt) was immobilized on a screen-printed carbon electrode (SPCE) modified with gold nanoparticles (AuNPs). Under optimum conditions, the linearity of the aptasensor was between 1.0 and 6.0 × 106 ng L-1 with a detection limit of 0.65 and a quantification limit of 2.15 ng L-1. The electrode could be regenerated up to 24 times without the use of chemicals. The aptasensor showed good repeatability (RSD <11.2%) and good reproducibility (RSD <7.7%). The proposed method successfully quantified CAP in milk, shrimp pond water and shrimp meat with good accuracy (recovery = 88.0 ± 0.6% to 100 ± 2%). The proposed aptasensor could be especially useful in agriculture to ensure the quality of food and the environment and could be used to determine other antibiotics.

A dual-electrode label-free immunosensor based on in situ prepared Au-MoO3-Chi/porous graphene nanoparticles for point-of-care detection of cholangiocarcinoma

A novel label-free electrochemical immunosensor was prepared for the detection of carbohydrate antigen 19-9 (CA19-9) and carcinoembryonic antigen (CEA) as biomarkers of cholangiocarcinoma (CCA). A nanocomposite of gold nanoparticles, molybdenum trioxide, and chitosan (Au-MoO3-Chi) was layer-by-layer assembled on the porous graphene (PG) modified a dual screen-printed electrode using a self-assembling technique, which increased surface area and conductivity and enhanced the adsorption of immobilized antibodies. The stepwise self-assembling procedure of the modified electrode was further characterized morphologically and functionally. The electroanalytical detection of biomarkers was based on the interaction between the antibody and antigen of each marker via linear sweep voltammetry using ferrocyanide/ferricyanide as an electrochemical redox indicator. Under optimized conditions, the fabricated immunosensor showed linear relationships between current change (ΔI) and antigen concentrations in two ranges: 0.0025-0.1 U mL-1 and 0.1-1.0 U mL-1 for CA19-9, and 0.001-0.01 ng mL-1 and 0.01-1.0 ng mL-1 for CEA. The limits of detection (LOD) were 1.0 mU mL-1 for CA19-9 and 0.5 pg mL-1 for CEA. Limits of quantitation (LOQ) were 3.3 mU mL-1 for CA19-9 and 1.6 pg mL-1 for CEA. The selectivity of the developed immunosensor was tested on mixtures of antigens and was then successfully applied to determine CA19-9 and CEA in human serum samples, producing satisfactory results consistent with the clinical method.

A poly(o-phenylenediamine) coated aluminum garter spring micro-solid phase extractor for pyrethroids in chili

An aluminum garter spring coated with poly(o-phenylenediamine) (PoPD) was developed as a sorbent for the micro-solid phase extraction of seven pyrethroids, bifenthrin, fenpropathrin, lambda-cyhalothrin, cyfluthrin, permethrin, cypermethrin and deltamethrin from fresh chili, chili flakes, and curry pastes. The extraction was qualified and quantified by a gas chromatograph coupled with an electron capture detector. Under optimum conditions, the linearity was at a concentration range of 10-3000 µg kg-1. The limits of detection and limits of quantitation of 9.3 to 34.2 μg kg-1, and 11.8 to 48.6 μg kg-1, respectively, were obtained with good sorbent-to-sorbent reproducibility, and outstanding reusability. When applied to determine the seven pyrethroids in chili samples, some pyrethroids were detected up to 30.3 ± 1.2 μg kg-1. This proposed method is simple, with potential applications in the trace analysis of other compounds.

Voltammetric sensor for an anti-cancer drug cisplatin based on bismuth nanoparticles/graphene modified glassy carbon electrode

A selective and sensitive voltammetric sensor for the measurement of the chemotherapy drug cisplatin was based on bismuth nanoparticles decorated on a graphene-modified glassy carbon electrode (BiNPs/Gr/GCE). The surface morphologies of electrode modifications were characterized using scanning electron microscopy (SEM). Electrochemical characteristics were evaluated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Differential pulse voltammetry (DPV) was employed to detect cisplatin oxidation. Under the optimal conditions, oxidation peak currents increased linearly with cisplatin concentration from 6.0 to 180 μM. The detection limit was calculated to be 4.4 μM and the limit of quantification was 14.7 μM. Analytical performance studies demonstrated the good electrode reproducibility and the selectivity of the BiNPs/Gr/GCE towards cisplatin detection. The developed cisplatin sensor was successfully utilized to measure cisplatin in samples of human serum. Recoveries ranged from 89 to 102% and the results from the developed sensor were concordant (P > 0.05) with the results of analysis by high-performance liquid chromatography coupled with ultraviolet detection.

Portable contactless caliper

This work presents a portable optical meter for noncontact thickness measurement. The device shines a focused laser light on a thin and transparent sample, resulting in an interference between light reflecting from the top and from the bottom surface, and the interfering pattern is recorded by a linear sensor array before data analysis with an Arduino microcontroller. The device produced accurate thickness values from glass cover slips and transparent plastic sheets within a fraction of a second per measurement. Additionally, the sample's refractive index is not required a priori. Therefore, it has a high potential to be of use in real-time quality control in transparent thick-film coating and manufacturing.

A wearable electrode based on copper nanoparticles for rapid determination of paraquat

The application of copper-based nanoparticles synthesized via green synthesis and their integration with a wearable electrode is reported for designing a flexible catalytic electrode on a glove for onsite electroanalysis of paraquat. A copper precursor and an orange extract from Citrus reticulata are used to synthesize an economical electrocatalytic material for supporting the selective and sensitive detection of paraquat. The electrode yields multidimensional fingerprints due to two redox couples in a square wave voltammogram, corresponding to the presence of paraquat. The developed lab-on-a-finger sensor provides the fast electroanalysis of paraquat within 10 s, covering a wide range from 0.50 to 1000 µM, with a low detection limit down to 0.31 µM and high selectivity. It is also possible to use this sensor at a fast scan rate as high as 6 V s-1 (< 0.5 s for a scan). This wearable glove sensor allows the user to directly touch and analyze samples, such as surfaces of vegetables and fruits, to screen the contamination. It is envisioned that these glove-embedded sensors can be applied to the on-site analysis of food contamination and environments.

Molecularly imprinted polymer dual electrochemical sensor for the one-step determination of albuminuria to creatinine ratio (ACR)

The urinary albumin to creatinine ratio (ACR) is a convenient and accurate biomarker of chronic kidney disease (CKD). An electrochemical sensor for the quantification of ACR was developed based on a dual screen-printed carbon electrode (SPdCE). The SPdCE was modified with carboxylated multiwalled carbon nanotubes (f-MWCNTs) and redox probes of polymethylene blue (PMB) for creatinine and ferrocene (Fc) for albumin. The modified working electrodes were then molecularly imprinted with coated with polymerized poly-o-phenylenediamine (PoPD) to form surfaces that could be separately imprinted with creatinine and albumin template molecules. The seeded polymer layers were polymerized with a second coating of PoPD and the templates were removed to form two different molecularly imprinted polymer (MIP) layers. The dual sensor presented recognition sites for creatinine and albumin on different working electrodes, enabling the measurement of each analyte in one potential scan of square wave voltammetry (SWV). The proposed sensor produced linear ranges of 5.0-100 ng mL^-1 and 100-2500 ng mL^-1 for creatinine, and 5.0-100 ng mL^-1 for albumin. LODs were 1.5 ± 0.2 ng mL^-1 and 1.5 ± 0.3 ng mL^-1, respectively. The dual MIP sensor was highly selective and stable for seven weeks at room temperature. The ACRs obtained using the proposed sensor compared well (P > 0.05) with the results from immunoturbidimetric and enzymatic methods.

A portable electrochemical immunosensor for ovarian cancer uses hierarchical microporous carbon material from waste coffee grounds

A simple label-free electrochemical immunosensor for ovarian cancer (OC) detection was developed using a hierarchical microporous carbon material fabricated from waste coffee grounds (WCG). The analysis method exploited near-field communication (NFC) and a smartphone-based potentiostat. Waste coffee grounds were pyrolyzed with potassium hydroxide and used to modify a screen-printed electrode. The modified screen-printed electrode was decorated with gold nanoparticles (AuNPs) to capture a specific antibody. The modification and immobilization processes were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The sensor had an effective dynamic range of 0.5 to 50.0 U mL^-1 of cancer antigen 125 (CA125) tumor marker with a correlation coefficient of 0.9995. The limit of detection (LOD) was 0.4 U mL^-1. A comparison of the results obtained from human serum analysis with the proposed immunosensor and the results obtained from the clinical method confirmed the accuracy and precision of the proposed immunosensor.

Novel biosensor platform for glucose monitoring via smartphone based on battery-less NFC potentiostat

Near-field communication (NFC) was used to control a portable glucose biosensor for diabetes diagnosis. The system comprised a smartphone and an NFC potentiostat connected to a screen-printed carbon electrode (SPCE) modified with Prussian blue-graphene ink and functionalized with gold nanoparticles-embedded poly (3,4ethylene dioxythiophene):polysulfonic acid coated with glucose oxidase (GOx-AuNPs-PEDOT:PSS/PB-G). GOx catalyzed the glucose redox reaction while the conductivity and sensitivity of the AuNPs-PEDOT:PSS composite enhanced electron transfer to the PB-G, which was used as a mediator. The fabrication process was characterized by scanning electron microscopy (SEM) with energy dispersibe x-ray analysis (EDX). The platform was electrochemically characterized by electrical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The NFC biosensing device was then applied to quantify glucose in human blood serum by amperometry. The linear concentration range and detection limit for glucose were 0.5-500 μM and 0.15 μM, respectively. The accuracy of the device was good and results were in agreement with the results obtained from the standard hospital method. This NFC glucose sensing device can be a simple, sensitive, selective and portable platform for medical diagnosis.

One-step electrodeposition of poly(o-phenylenediamine)-Zn composite on plaswood propeller as an extraction device for polycyclic aromatic hydrocarbons in coffee

Coffee beans can be contaminated during roasting by polycyclic aromatic hydrocarbons (PAHs), some of which have been classified as carcinogens. An extraction device for PAHs in coffee drinks was designed with six compact DC motors rotating six sorbents. The sorbents were plaswood propellers modified by one-step electrodeposition of a poly(ortho-phenylenediamine) and Zn composite (PoPD-Zn). Benzo(a)anthracene (BaA), chrysene (Chry), benzo(b)fluoranthene (BbF), and benzo(a)pyrene (BaP) were chosen as representative PAHs. Scanning electron micrographs of the PoPD-Zn showed a porous structure. The extracted PAHs were quantified by gas chromatography coupled with a flame ionization detector. Detected concentrations of PAHs in coffee drink samples were as follows: BaA 1.4 ± 0.4 to 16.5 ± 0.8 µg L^-1; Chry 0.5 ± 0.2 to 2.1 ± 0.5 µg L^-1; BbF 2.2 ± 0.6 µg L^-1; and BaP 6.2 ± 1.0 µg L^-1. Good recoveries ranging from 82.7 ± 1.9% to 99.0 ± 0.5% were obtained.

Craft-and-Stick Xurographic Manufacturing of Integrated Microfluidic Electrochemical Sensing Platform

An innovative modular approach for facile design and construction of flexible microfluidic biosensor platforms based on a dry manufacturing "craft-and-stick" approach is developed. The design and fabrication of the flexible graphene paper electrode (GPE) unit and polyethylene tetraphthalate sheet (PET)6/adhesive fluidic unit are completed by an economic and generic xurographic craft approach. The GPE widths and the microfluidic channels can be constructed down to 300 μm and 200 μm, respectively. Both units were assembled by simple double-sided adhesive tapes into a microfluidic integrated GPE (MF-iGPE) that are flexible, thin (<0.5 mm), and lightweight (0.4 g). We further functionalized the iGPE with Prussian blue and glucose oxidase for the fabrication of MF-iGPE glucose biosensors. With a closed-channel PET fluidic pattern, the MF-iGPE glucose biosensors were packaged and sealed to protect the integrated device from moisture for storage and could easily open with scissors for sample loading. Our glucose biosensors showed 2 linear dynamic regions of 0.05-1.0 and 1.0-5.5 mmol L^-1 glucose. The MF-iGPE showed good reproducibility for glucose detection (RSD < 6.1%, n = 6) and required only 10 μL of the analyte. This modular craft-and-stick manufacturing approach could potentially further develop along the concept of paper-crafted model assembly kits suitable for low-resource laboratories or classroom settings.

Electrochemical sensor based on molecularly imprinted polymer cryogel and multiwalled carbon nanotubes for direct insulin detection

Insulin is the polypeptide hormone that regulates blood glucose levels. It is used as an indicator of both types of diabetes. An electrochemical insulin sensor was developed using a gold electrode modified with carboxylated multiwalled carbon nanotubes (f-MWCNTs) and molecularly imprinted polymer (MIP) cryogel. The MIP provided specific recognition sites for insulin, while the macropores of the cryogel promoted the mass transfer of insulin to the recognition sites. The f-MWCNTs increased the effective surface area and conductivity of the sensor and also reduced the potential required to oxidize insulin. Insulin oxidation was directly measured in a flow system using square wave voltammetry. This MIP cryogel/f-MWCNTs sensor provided a linear range of 0.050-1.40 pM with a very low limit of detection (LOD) of 33 fM. The sensor exhibited high selectivity and long-term stability over 10 weeks of dry storage at room temperature. The results of insulin determination in human serum using the sensor compared well with the results of the Elecsys insulin assay. The developed MIP sensor offers a promising alternative for the diagnosis and treatment of diabetes.

A wireless smartphone-based "tap-and-detect" formaldehyde sensor with disposable nano-palladium grafted laser-induced graphene (nanoPd@LIG) electrodes

We developed a fully integrated smart sensing device for on-site testing of food to detect trace formaldehyde (FA). A nano-palladium grafted laser-induced graphene (nanoPd@LIG) composite was synthesized by one-step laser irradiation of a Pd²⁺-chitosan-polyimide precursor. The composite was synthesized in the form of a three-electrode sensor on a polymer substrate. The electrochemical properties and morphology of the fabricated composite were characterized and the electrochemical kinetics of FA oxidation at the nanoPd@LIG electrode were investigated. The nanoPd@LIG electrode was combined with a smart electrochemical sensing (SES) device to determine FA electrochemically. The proposed SES device uses near field communication (NFC) to receive power and transfer data between a smartphone interface and a battery-free sensor. The proposed FA sensor exhibited a linear detection range from 0.01 to 4.0 mM, a limit of detection of 6.4 μM, good reproducibility (RSDs between 2.0 and 10.1%) and good anti-interference properties for FA detection. The proposed system was used to detect FA in real food samples and the results correlated well with the results from a commercial potentiostat and a spectrophotometric analysis.

A Novel Microfluidic-Based OMC-PEDOT-PSS Composite Electrochemical Sensor for Continuous Dopamine Monitoring

Fast and precise analysis techniques using small sample volumes are required for next-generation clinical monitoring at the patient's bedside, so as to provide the clinician with relevant chemical data in real-time. The integration of an electrochemical sensor into a microfluidic chip allows for the achievement of real-time chemical monitoring due to the low consumption of analytes, short analysis time, low cost, and compact size. In this work, dopamine, used as a model, is an important neurotransmitter responsible for controlling various vital life functions. The aim is to develop a novel serpentine microfluidic-based electrochemical sensor, using a screen-printed electrode for continuous dopamine detection. The developed sensor employed the composite of ordered mesoporous carbon (OMC) and poly (3,4 ethylenedioxythiophene)-poly (styrene sulfonate) (PEDOT-PSS). The performance of a microfluidic, integrated with the sensor, was amperometrically evaluated using a computer-controlled microfluidic platform. The microfluidic-based dopamine sensor exhibited a sensitivity of 20.2 ± 0.6 μA μmol L^-1, and a detection limit (LOD) of 21.6 ± 0.002 nmol L^-1, with high selectivity. This microfluidic-based electrochemical sensor was successfully employed to determine dopamine continuously, which could overcome the problem of sensor fouling with more than 90% stability for over 24 h. This novel microfluidic sensor platform provides a powerful tool for the development of a continuous dopamine detection system for human clinical application.

Newly found K+-Thioflavin T competitive binding to DNA G-quadruplexes and the development of a label-free fluorescent biosensor with extra low detection limit for K+ determination in urine samples

The determination of potassium ion K⁺ in body fluids is important in health monitoring and diagnoses. One of the interesting and simple methods for K⁺ detection is the use of label-free biosensors based on DNA G-quadruplexes (GQs) coupled with a specific fluorescent probe, such as Thioflavin T (ThT), which lights up when bound with K⁺-stabilized GQs. However, these biosensors are not generally sensitive. In this work, we found a solution: at a low concentration, K⁺ competes with ThT in binding to a bimolecular GQ or a tetramolecular GQ, resulting in a decrease in ThT fluorescence emission with increasing K⁺. Therefore, we developed a label-free turn-off fluorescent K⁺ sensor. The sensor provides a very low detection limit of 21.87 ± 0.59 nM. Other possible interfering components in urine did not exert any effect even at quantities that were 10-fold greater than their upper limit of normal concentrations found in urine samples. With its only requirement of diluting samples, the developed low-cost label-free probe and simple sensor was successfully applied to the direct detection of K⁺ in normal urine samples with high accuracy (recoveries ranged from 90% to 100%).

Flow Injection Amperometric Measurement of Formalin in Seafood

Formalin is illegally used as an antibacterial and a preservative in seafood products. It is extremely important for public health reasons to be able to simply, rapidly, and accurately detect formalin in fresh seafood. In this work, we developed a flow injection amperometric (FI-Amp) formalin sensor based on a glassy carbon electrode modified with a composite of palladium particles and carbon microspheres (PdPs-CMs/GCE). The CMs were decorated with PdPs via an electroless deposition method. The surface morphology of the CMs and the PdPs-CMs composite was characterized by scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX). The electrochemical behavior and measurement of formalin at the PdPs-CMs/GCE was evaluated by cyclic voltammetry and amperometry. The modified electrode demonstrated good electrocatalytic performance for the oxidation of formalin. The synthesis method and FI-Amp operating conditions were optimized. Under the optimal conditions, the developed sensor showed a linear range of 0.025 to 15.00 mmol L^-1 and a detection limit of 8 μmol L^-1. Repeatability (RSD < 4.1%, n = 30), reproducibility (RSD = 0.25%, n = 5), stability (RSD = 3.2%, n = 80), and selectivity were good. The fabricated sensor achieved recoveries of formalin in seafood between 96 ± 1 to 105 ± 3 (n = 3).

Fluorescent cysteine probe based on a signal amplification unit, a catalyzed hairpin assembly reaction and Förster resonance energy transfer

This work developed a sensitive DNA-based fluorescent probe comprising a cysteine binding unit and a signal amplification unit based on a catalyzed hairpin assembly (CHA) reaction. The cysteine binding unit comprises a homodimer of single-stranded DNA (ssDNA) rich in cytosine and held together by silver ions. In the presence of cysteine, the homodimer is disintegrated because of cysteine-silver binding that liberates the ssDNA, which drives the CHA reaction in the signal amplification unit. Förster resonance energy transfer (FRET) was used to report the generation of the amplified double-stranded DNA (dsDNA) product. Under the optimal conditions, the probe provided a good linearity (100-1200 nM), a good detection limit (47.8 ± 2.7 nM) and quantification limit (159.3 ± 5.3 nM), and a good sensitivity (1.900 ± 0.045μM^-1). The probe was then used to detect cysteine in nine real food supplement samples. All results provided good recoveries that are acceptable by the AOAC, indicating that it has potential for practical applications.

A Fabrication of Multichannel Graphite Electrode Using Low-Cost Stencil-Printing Technique

Multichannel graphite electrodes (MGrEs) have been designed and fabricated in this study. A template was cut from an adhesive plastic sheet using a desktop cutting device. The template was placed on a polypropylene substrate, and carbon graphite ink was applied with a squeegee to the template. The size of the auxiliary electrode (AE) as well as the location of the reference electrode (RE) of MGrEs design were investigated. Scanning electron microscopy was used to determine the thickness of the ink on the four working electrodes (WEs), which was 21.9 ± 1.8 µm. Cyclic voltammetry with a redox probe solution was used to assess the precision of the four WEs. The intra-electrode repeatability and inter-electrode reproducibility of the MGrEs production were satisfied by low RSD (<6%). Therefore, the MGrEs is reliable and capable of detecting four replicates of the target analyte in a single analysis. The electrochemical performance of four WEs was investigated and compared to one WE. The sensitivity of the MGrEs was comparable to the sensitivity of a single WE. The MGrEs’ potential applications were investigated by analyzing the nitrite in milk and tap water samples (recoveries values of 97.6 ± 0.4 to 110 ± 2%).

A copper nanoclusters probe for dual detection of microalbumin and creatinine

A fluorescent probe based on glutathione-capped copper nanoclusters (GSH-CuNCs) was developed for the detection of dual targets, human serum albumin (HSA) and creatinine, in human urine. The GSH-CuNCs were synthesized by a one-pot green method using ascorbic acid as a reducing agent. The detection of HSA was in a turn-on mode via electrostatic interaction in a basic condition while the detection of creatinine was in a turn-off mode via non-covalent bonding in an acidic condition. Under optimal conditions, the linear range and detection limit of HSA were 5.0 nM to 150 nM and 1.510 ± 0.041 nM, while those of creatinine were 30 μM to 1000 μM and 13.0 ± 1.0 μM. This easily fabricated nanocluster probe provided a fast response with high sensitivity, and good selectivity. Recoveries from urine samples were in the range of 81.44 ± 0.25 to 109.22 ± 0.57% for HSA and 80.57 ± 0.16 to 109.0 ± 0.10% for creatinine. The urinary analytical results from the fluorescent probe were in good agreement (P > 0.05) to those obtained from immunoturbidimetric and enzymatic methods, signifying the excellent performance of this sensing system.

Portable device for dual detection of fluorescence and absorbance for biosensing or chemical sensing applications

Early detection is key to prevent health problems and could be performed by biosensors and chemical sensors. However, a lot of them still need bulky benchtop equipment. This work presents a portable device for measuring fluorescence and light absorption that can be used with optical biosensors or chemical sensors. It uses a small laser diode as a light source and three filter-mounted photodiodes as detectors, all of which are inexpensive, customizable and widely available commercially. The results from our device show good correlation with that from commercial instruments. Therefore, it could be beneficial for early or on-site detection.

Lab on a body for biomedical electrochemical sensing applications: The next generation of microfluidic devices

This chapter highlights applications of microfluidic devices toward on-body biosensors. The emerging application of microfluidics to on-body bioanalysis is a new strategy to establish systems for the continuous, real-time, and on-site determination of informative markers present in biofluids, such as sweat, interstitial fluid, blood, saliva, and tear. Electrochemical sensors are attractive to integrate with such microfluidics due to the possibility to be miniaturized. Moreover, on-body microfluidics coupled with bioelectronics enable smart integration with modern information and communication technology. This chapter discusses requirements and several challenges when developing on-body microfluidics such as difficulties in manipulating small sample volumes while maintaining mechanical flexibility, power-consumption efficiency, and simplicity of total automated systems. We describe key components, e.g., microchannels, microvalves, and electrochemical detectors, used in microfluidics. We also introduce representatives of advanced lab-on-a-body microfluidics combined with electrochemical sensors for biomedical applications. The chapter ends with a discussion of the potential trends of research in this field and opportunities. On-body microfluidics as modern total analysis devices will continue to bring several fascinating opportunities to the field of biomedical and translational research applications.

Evaluation on the Intrinsic Physicoelectrochemical Attributes and Engineering of Micro-, Nano-, and 2D-Structured Allotropic Carbon-Based Papers for Flexible Electronics

Flexible electronics have gained more attention for emerging electronic devices such as sensors, biosensors, and batteries with advantageous properties including being thin, lightweight, flexible, and low-cost. The development of various forms of allotropic carbon papers provided a new dry-manufacturing route for the fabrication of flexible and wearable electronics, while the electrochemical performance and the bending stability are largely influenced by the bulk morphology and the micro-/nanostructured domains of the carbon papers. Here, we evaluate systematically the intrinsic physicoelectrochemical properties of allotropic carbon-based conducting papers as flexible electrodes including carbon-nanotubes-paper (CNTs-paper), graphene-paper (GR-paper), and carbon-fiber-paper (CF-paper), followed by functionalization of the allotropic carbon papers for the fabrication of flexible electrodes. The morphology, chemical structure, and defects originating from the allotropic nanostructured carbon materials were characterized by scanning electron microscopy (SEM) and Raman spectroscopy, followed by evaluating the electrochemical performance of the corresponding flexible electrodes by cyclic voltammetry and electrochemical impedance spectroscopy. The electron-transfer rate constants of the CNTs-paper and GR-paper electrodes were ∼14 times higher compared with the CF-paper electrode. The CNTs-paper and GR-paper electrodes composed of nanostructured carbon showed significantly higher bending stabilities of 5.61 and 4.96 times compared with the CF-paper. The carbon-paper flexible electrodes were further functionalized with an inorganic catalyst, Prussian blue (PB), forming the PB-carbon-paper catalytic electrode and an organic conducting polymer, poly(3,4-ethylenedioxythiophene) (PEDOT), forming the PEDOT-carbon-paper capacitive electrode. The intrinsic attribute of different allotropic carbon electrodes affects the deposition of PB and PEDOT, leading to different electrocatalytic and capacitive performances. These findings are insightful for the future development and fabrication of advanced flexible electronics with allotropic carbon papers.

Cavitas electrochemical sensors for the direct determination of salivary thiocyanate levels

Noninvasive diagnosis using salivary samples to detect thiocyanate provides vital information on individual health. This article demonstrates the first example of a wearable sensing device to noninvasively assess thiocyanate levels. The customized screen-printed electrode system is integrated into a form of a mouthguard squarewave-voltammetric sensor toward the convenient and fast detection of the salivary biomarker within 15 s. The sensor with a protective film to mitigate the effect of biofouling offers high sensitivity and selectivity toward the detection of thiocyanate ions. Partial least square regression is applied to analyze the high-order squarewave-voltammetric data over the applied potential range of 0-1.75 V vs Ag/AgCl and quantify the thiocyanate concentration in a complex matrix. The mouthguard sensor operating under physiological conditions can monitor a wide range of thiocyanate (up to 11 mM) with a low detection limit of 30 µM. The demonstration introduces a unique approach, that obviates the requirement for blood sampling, to study thiocyanate levels of healthy people, cigarette smokers, or people with other health conditions. It is envisioned that the new cavitas device possesses a substantial promise for diverse biomedical diagnosis applications.

An enzymatic histamine biosensor based on a screen-printed carbon electrode modified with a chitosan-gold nanoparticles composite cryogel on Prussian blue-coated multi-walled carbon nanotubes

A histamine biosensor was developed based on a screen-printed carbon electrode modified with Prussian blue (PB) electrodeposited on multi-walled carbon nanotubes covered with a macroporous layer of chitosan-gold nanoparticles composite cryogel (CS-AuNPs Cry). With its high specific surface area and conductivity, CS-AuNPs Cry proved an excellent supporting material for diamine oxidase (DAO) immobilization. PB acted as a redox mediator to promote electron transfer between hydrogen peroxide and the electrode surface. The PB reduction current was measured during the hydrogen peroxide-releasing oxidation of histamine catalyzed by DAO. The proposed biosensor displayed two linear ranges: 2.50-125.0 µmol L^-1 and 125.0-400.0 µmol L^-1. The limit of detection was 1.81 µmol L^-1. Reproducibility was good (RSD = 5.46%), operational stability high, long-term stability excellent, and selectivity good. The biosensor determined histamine levels in fish and shrimps with satisfactory recoveries, and the obtained results agreed with those obtained by ELISA.

Extraction and electrochemical detection for quantification of trace-level DNA

A novel strategy was developed to extract, detect, and quantify trace-level DNA. For the extraction step, a composite of methylene blue (MB), poly(acrylic acid) (PAA), and modified iron oxide magnetic nanoparticles (IOMNPs) (PAA/IOMNPs) was used to adsorb DNA from the sample. MB-PAA/IOMNPs with adsorbed DNA were then separated from the solution with an external magnet and MB-DNA was eluted from PAA/IOMNPs with acetic acid. In the detection step, MB-DNA was adsorbed on the surface of 3-aminopropyltriethoxysilane (APTES)-modified glassy carbon electrode via electrostatic force. DNA was quantified by measuring the oxidation peak of MB at a potential -0.13 V vs. Ag/AgCl using differential pulse voltammetry. Under the optimal experimental conditions, the DNA sensor showed linear ranges from 0.001 to 0.005 pg μL^-1, 0.005 to 0.070 pg μL^-1, and 0.070 to 0.400 pg μL^-1 and a limit of detection of 0.87 fg μL^-1. The proposed sensor detected trace DNA in real samples with recoveries that ranged from 80.4 to 90.4%.

Discrimination of dopamine by an electrode modified with negatively charged manganese dioxide nanoparticles decorated on a poly(3,4 ethylenedioxythiophene)/reduced graphene oxide composite

A unique nanocomposite was fabricated using negatively charged manganese dioxide nanoparticles, poly (3,4-ethylenedioxythiophene) and reduced graphene oxide (MnO₂/PEDOT/rGO). The nanocomposite was deposited on a glassy carbon electrode (GCE) functionalized with amino groups. The modified GCE was used to electrochemically detect dopamine (DA). The surface morphology, charge effect and electrochemical behaviours of the modified GCE were characterized by scanning electron microscopy, energy dispersive X-ray analysis (EDX), cyclic voltammetry and electrochemical impedance spectroscopy, respectively. The MnO₂/PEDOT/rGO/GCE exhibited excellent performance towards DA sensing with a linear range between 0.05 and 135 µM with a lowest detection limit of 30 nM (S/N = 3). Selectivity towards DA was high in the presence of high concentrations of the typical interferences ascorbic acid and uric acid. The stability and reproducibility of the electrode were good. The sensor accurately determined DA in human serum. The synergic effect of the multiple components of the fabricated nanocomposite were critical to the good DA sensing performance. rGO provided a conductive backbone, PEDOT directed the uniform growth of MnO₂ and adsorbed DA via pi-pi and electrostatic interaction, while the negatively charged MnO₂ provided adsorption and catalytic sites for protonated DA. This work produced a promising biosensor that sensitively and selectively detected DA.

Studying the preparation, electrochemical performance testing, comparison and application of a cost-effective flexible graphene working electrode

-A cost-effective flexible graphene working electrode (FGWE) was fabricated using overhead projector transparent film (OPTF) and a screen-printing technique. The surface morphology and electrochemical behavior of the electrode were characterized by scanning electron microscopy and cyclic voltammetry. The electrode presented a very thin layer of conductive ink (16.0 ± 0.7 µm) on a large effective surface area (0.301 ± 0.001 cm^-2). The anodic peak current density (j_pa) of acetaminophen (ACT) in FGWE was 5.2, 3.7, 3.5 and 6.0 times greater than the j_pa of glassy carbon electrode (GCE), flexible carbon working electrode (FCWE), SPE1, and SPE2, respectively. The electrochemical performance of FGWE toward ACT was evaluated by differential pulse voltammetry. Under optimized condition, ACT was quantified in a range of  4-100 µM, with good sensitivity, good accuracy (recovery = 82.3 ± 0.4 to 106 ± 3%), and excellent precision. FGWE was applied to determine ACT in commercial pharmaceutical formulations. The results of the study are in good agreement with those obtained by the standard spectrophotometric method. These results indicate that disposable FGWE is particularly useful for the detection of ACT, and its performance may serve as a platform for cost-effective flexible electrochemical sensors.

A highly sensitive flow injection amperometric glucose biosensor using a gold nanoparticles/polytyramine/Prussian blue modified screen-printed carbon electrode

A novel oxidase enzyme sensor was fabricated based on the chemisorption of highly active glucose oxidase (GOx) on gold nanoparticles that were adsorbed on a polytyramine layer (AuNPs/Pty). The GOx/AuNPs/Pty assembly was coated on a Prussian blue (PB)-modified screen-printed carbon electrode (SPCE) to produce the GOx/AuNPs/Pty/PB/SPCE biosensor. The amperometric glucose biosensor response was measured at -0.10 V using a Ag pseudo-reference electrode through the reduction current of the PB mediator in a flow injection analysis system. Under optimised experimental conditions, the developed biosensor displayed linearity over the 1.0 μM-1.0 mM glucose concentration range and a limit of detection of 1.0 μM (S/N ≥ 3). A low value for the Michaelis constant of 0.21 mM indicated that the immobilised GOx had high affinity for glucose. The developed biosensor exhibited excellent operational stability over 374 injections, long-term stability over 3 weeks, good reproducibility (relative standard deviations = 1.9%-4.3%) and high selectivity. The results obtained analysing glucose in blood plasma samples were satisfactory when compared with the corresponding results recorded implementing the standard hexokinase-spectrophotometric method (P > 0.05).

Subnanomolar detection of promethazine abuse using a gold nanoparticle-graphene nanoplatelet-modified electrode

A simple, sensitive, and effective adsorptive stripping voltammetric sensor for the detection of trace-level promethazine was created based on a gold nanoparticle-graphene nanoplatelet-modified glassy carbon electrode (AuNP-GrNP/GCE). AuNP-GrNP nanocomposites were synthesized using an electroless deposition process, and the morphology was characterized using UV-vis spectroscopy, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The electrochemical behavior and detection of promethazine at the AuNP-GrNP/GCE were investigated utilizing cyclic voltammetry and adsorptive stripping voltammetry. The AuNP-GrNP/GCE showed outstanding synergistic electrochemical activity for promethazine oxidation, a highly active surface area, great adsorptivity, and outstanding catalytic properties. The electrolyte pH, amount of AuNP-GrNP nanocomposite, preconcentration potential (vs. Ag/AgCl), and time were optimized to obtain a high performance electrochemical sensor. Under optimal conditions, the proposed sensor displayed two linear concentration ranges from 1.0 nmol L^-1 to 1.0 μmol L^-1 and from 1.0 to 10 μmol L^-1. The limits of detection and quantitation were 0.40 and 1.4 nmol L^-1, respectively. This sensor displayed high sensitivity, a capability for rapid analysis, and excellent repeatability and reproducibility. The developed sensor was effective and practical for promethazine detection in biological fluids and forensic samples, and the obtained results exhibited excellent agreement with the results obtained using the method described in the British Pharmacopoeia. Graphical abstract.

Magnetic microsphere sorbent on CaCO3 templates: Simple synthesis and efficient extraction of trace carbamate pesticides in fresh produce

Polypyrrole magnetic microspheres were synthesized and used to extract carbaryl, carbofuran, and methomyl before analysis by a high-performance liquid chromatography with diode array detection. Under optimal conditions, four times the preconcentration was achieved with the use of only 1.2 mL of sample. Good linearity with ranges of 3.0-7.5 × 10³, 6.0-4.5 × 10³, and 15-3.0 × 10³ ng kg^-1 and limits of detection of 1.37 ± 0.10, 4.7 ± 1.2, and 10.1 ± 5.7 ng kg^-1 were obtained, respectively. Good reproducibility (RSDs < 5%) was achieved over 24 cycles of extraction and regeneration. Good accuracy (recoveries 81.6 ± 1.5%-108.3 ± 2.2%) and good precision (RSDs 0.11%-4.5%) were obtained. Carbaryl was detected in apple (2.75 ± 0.23 ng kg^-1), carbofuran in tomato (11.34 ± 0.61 ng kg^-1), and methomyl in watermelon (34.7 ± 1.7 ng kg^-1). The relative expanded uncertainty of the measurement method was less than 14% for all three pesticides.

Bio-PEDOT: Modulating Carboxyl Moieties in Poly(3,4-ethylenedioxythiophene) for Enzyme-Coupled Bioelectronic Interfaces

Modulation of chemical functional groups on conducting polymers (CPs) provides an effective way to tailor the physicochemical properties and electrochemical performance of CPs, as well as serves as a functional interface for stable integration of CPs with biomolecules for organic bioelectronics (OBEs). Herein, we introduced a facile approach to modulate the carboxylate functional groups on the PEDOT interface through a systematic evaluation on the effect of a series of carboxylate-containing molecules as counterion dopant integrated into the PEDOT backbone, including acetate as monocarboxylate (mono-COO^-), malate as dicarboxylate (di-COO^-), citrate as tricarboxylate (tri-COO^-), and poly(acrylamide-co-acrylate) as polycarboxylate (poly-COO^-) bearing different amounts of molecular carboxylate moieties to create tunable PEDOT:COO^- interfaces with improved polymerization efficiency. We demonstrated the modulation of PEDOT:COO^- interfaces with various granulated morphologies from 0.33 to 0.11 μm, tunable surface carboxylate densities from 0.56 to 3.6 μM cm^-2, and with improved electrochemical kinetics and cycling stability. We further demonstrated the effective and stable coupling of an enzyme model lactate dehydrogenase (LDH) with the optimized PEDOT:poly-COO^- interface via simple covalent chemistry to develop biofunctionalized PEDOT (Bio-PEDOT) as a lactate biosensor. The biosensing mechanism is driven by a sequential bioelectrochemical signal transduction between the bio-organic LDH and organic PEDOT toward the concept of all-polymer-based OBEs with a high sensitivity of 8.38 μA mM^-1 cm^-2 and good reproducibility. Moreover, we utilized the LDH-PEDOT biosensor for the detection of lactate in spiked serum samples with a high recovery value of 91-96% and relatively small RSD in the range of 2.1-3.1%. Our findings provide a new insight into the design and optimization of functional CPs, leading to the development of new OBEs for sensing, biosensing, bioengineering, and biofuel cell applications.

A miniature stainless steel net dumbbell-shaped stir-bar for the extraction of phthalate esters in instant noodle and rice soup samples

This work reports the development of a very-simple-to-construct stir-bar extraction device so called "a dumbbell-shaped stainless steel stir-bar." The extraction device was assembled from a rolled up stainless steel net filled with an XAD-2 sorbent and a metal rod to allow the use of a magnetic stirrer during extraction. The dumbbell-shaped stainless steel stir-bar was used to extract diethyl phthalate (DEP), dibutyl phthalate (DBP), and di(2-ethylhexyl) phthalate (DEHP) before analysis by a gas chromatograph equipped with an electron capture detector (GD-ECD). Under the optimal conditions, the developed method provided a good linearity from 10.0 to 1,000.0 ng mL^-1 for all three compounds. Limits of detection and limits of quantification were 9.37 ± 0.29 ng mL^-1 and 31.22 ± 0.95 ng mL^-1 for DEP, 5.73 ± 0.31 ng mL^-1 and 19.1 ± 1.0 ng mL^-1 for DBP and 3.30 ± 0.06 ng mL^-1 and 11.0 ± 0.19 ng mL^-1 for DEHP, respectively. Good recoveries in the range of 81.89 ± 0.17 to 109.5 ± 2.0% were achieved when the method was used to extract phthalate esters in five instant noodle and two rice soup samples.

Simultaneous Detection of Ammonium and Nitrate in Environmental Samples Using on Ion-Selective Electrode and Comparison with Portable Colorimetric Assays

Simple, robust, and low-cost nitrate- and ammonium-selective electrodes were made using substrate prepared from household materials. We explored phosphonium-based ILs and poly (methyl methacrylate)/poly(decyl methacrylate)(MMA-DMA) copolymer as matrix materials alternative to classical PVC-based membranes. IL-based membranes showed suitability only for nitrate-selective electrode exhibiting linear concentration range between 5.0 × 10^-6 and 2.5 × 10^-3 M with a detection limit of 5.5 × 10^-7 M. On the other hand, MMA-DMA-based membranes showed suitability for both ammonium- and nitrate-selective electrodes, and were successfully applied to detect NO₃^- and NH₄⁺ in water and soil samples. The proposed ISEs exhibited near-Nernstian potentiometric responses to NO₃^- and NH₄⁺ with the linear range concentration between 5.0 × 10^-5 and 5.0 × 10^-2 M (LOD = 11.3 µM) and 5.0 × 10^-6 and 1.0 × 10^-3 M (LOD = 1.2 µM), respectively. The power of ISEs to detect NO₃^- and NH₄⁺ in water and soils was tested by comparison with traditional, portable colorimetric techniques. Procedures required for analysis by each technique from the perspective of a non-trained person (e.g., farmer) and the convenience of the use on the field are compared and contrasted.

Wavelet analysis on time-frequency plane of optical coherence tomography: simultaneous signal quality improvement in structural and velocity images

In this Letter, we utilize one-dimensional wavelet analysis to improve the quality of morphology images and velocity profiles of optical coherence tomography simultaneously, by performing analysis on the complex time-frequency plane of raw interferograms, prior to image construction. The results indicate a robust signal improvement that also preserves accuracy for both morphology and velocity information and has been demonstrated on a variety of samples with diverse flow speeds and morphologies.

Phage-based capacitive biosensor for Salmonella detection

This article reports the detection of Salmonella spp. based on M13 bacteriophage in a capacitive flow injection system. Salmonella-specific M13 bacteriophage was immobilized on a polytyramine/gold surface using glutaraldehyde as a crosslinker. The M13 bacteriophage modified electrode can specifically bind to Salmonella spp. via the amino acid groups on the filamentous phage. An alkaline solution was used to break the binding between the sensing surface and the analyte to allow renewable use up to 40 times. This capacitive system provided good reproducibility with a relative standard deviation (RSD) of 1.1%. A 75 µL min^-1 flow rate and a 300 µL sample volume provided a wide linear range, from 2.0 × 10² to 1.0 × 10⁷ cfu mL^-1, with a detection limit of 200 cfu mL^-1. Bacteria concentration can be analyzed within 40 min after the sample injection. When applied to test real samples (raw chicken meat) it provided good recoveries (100-111%). An enrichment process was also explored to increase the bacteria concentration, enabling a quantitative detection of Salmonella spp. This biosensor opens a new opportunity for the detection of pathogenic bacteria using bacteriophage.