Prediction of Aggregate Packing with Tubular Macrocapsules in the Inert Structure of Self-Healing Concrete Based on Dewar's Particle Packing Model

This paper brings a new insight into understanding the influence of macrocapsules in packing systems, which can be useful in designing the inert structure of self-healing concrete. A variety of tubular macrocapsules, in terms of types and sizes, was used to assess the capsules' effect in the packing, together with various aggregate types and fractions. The voids ratios (U) of aggregate mixtures were evaluated experimentally and compared with the prediction via the particle packing model of Dewar. The packing of coarse particles was found to be considerably affected by the presence of macrocapsules, while no capsules' effect on the packing of fine particles was attained. A higher capsule dosage and capsule aspect ratio led to a higher voids ratio. In the formulation of the inert structure, the packing disturbance due to capsules can be minimised by increasing the content of fine aggregates over coarse aggregates. Dewar's model showed a good compatibility with experimental results in the absence of capsules. However, the model needed to be upgraded for the introduction of tubular macrocapsules. Accordingly, the effect of macrocapsules was extensively analysed and a 'U model' for capsules (with some limitations) was finally proposed, offering a high predicting accuracy.

Investigation of AFeO3 (A=Ba, Sr) Perovskites for the Oxidative Dehydrogenation of Light Alkanes under Chemical Looping Conditions

Oxidative dehydrogenation (ODH) of light alkanes to produce C2 -C3 olefins is a promising alternative to conventional steam cracking. Perovskite oxides are emerging as efficient catalysts for this process due to their unique properties such as high oxygen storage capacity (OSC), reversible redox behavior, and tunability. Here, we explore AFeO3 (A=Ba, Sr) bulk perovskites for the ODH of ethane and propane under chemical looping conditions (CL-ODH). The higher OSC and oxygen mobility of SrFeO3 perovskite contributed to its higher activity but lower olefin selectivity than its Ba counterpart. However, SrFeO3 perovskite is superior in terms of cyclic stability over multiple redox cycles. Transformations of the perovskite to reduced phases including brownmillerite A2 Fe2 O5 were identified by X-ray diffraction (XRD) as a cause of performance degradation, which was fully reversible upon air regeneration. A pre-desorption step was utilized to selectively tune the amount of lattice oxygen as a function of temperature and dwell time to enhance olefin selectivity while suppressing CO2 formation from the deep oxidation of propane. Overall, SrFeO3 exhibits promising potential for the CL-ODH of light alkanes, and optimization through surface and structural modifications may further engineer well-regulated lattice oxygen for maximizing olefin yield.

Single-Site vs. Cluster Catalysis in High Temperature Oxidations

The behavior of single Pt atoms and small Pt clusters was investigated for high-temperature oxidations. The high stability of these molecular sites in CHA is a key to intrinsic structure-performance descriptions of elemental steps such as O₂ dissociation, and subsequent oxidation catalysis. Subtle changes in the atomic structure of Pt are responsible for drastic changes in performance driven by specific gas/metal/support interactions. Whereas single Pt atoms and Pt clusters (> ca. 1 nm) are unable to activate, scramble, and desorb two O₂ molecules at moderate T (200 °C), clusters <1 nm do so catalytically, but undergo oxidative fragmentation. Oxidation of alkanes at high T is attributed to stable single Pt atoms, and the C-H cleavage is inferred to be rate-determining and less sensitive to changes in metal nuclearity compared to its effect on O₂ scrambling. In contrast, when combustion involves CO, catalysis is dominated by metal clusters, not single Pt atoms.

A Study of the Flexural Behavior of Fiber-Reinforced Concretes Exposed to Moderate Temperatures

The use of synthetic fibers in fiber-reinforced concretes (FRCs) is often avoided due to the mistrust of lower performance at changing temperatures. This work examines the effect of moderate temperatures on the flexural strengths of FRCs. Two types of polypropylene fibers were tested, and one steel fiber was employed as a reference. Three-point bending tests were carried out following an adapted methodology based on the standard EN 14651. This adapted procedure included an insulation system that allowed the assessment of FRC flexural behavior after being exposed for two months at temperatures of 5, 20, 35 and 50 °C. In addition, the interaction of temperature with a pre-cracked state was also analyzed. To do this, several specimens were pre-cracked to 0.5 mm after 28 days and conditioned in their respective temperature until testing. The findings suggest that this range of moderate temperatures did not degrade the behavior of FRCs to a great extent since the analysis of variances showed that temperature is not always a significant factor; however, it did have an influence on the pre-cracked specimens at 35 and 50 °C.

Reversible Transformation of Pt Nanoparticles into Single Atoms inside High-Silica Chabazite Zeolite

We report the encapsulation of platinum species in highly siliceous chabazite (CHA) crystallized in the presence of N,N,N-trimethyl-1-adamantammonium and a thiol-stabilized Pt complex. When compared to Pt/SiO₂ or Pt-containing Al-rich zeolites, the materials in this work show enhanced stability toward metal sintering in a variety of industrial conditions, including H₂, O₂, and H₂O. Remarkably, temperatures in the range 650-750 °C can be reached without significant sintering of the noble metal. Detailed structural determinations by X-ray absorption spectroscopy and aberration-corrected high-angle annular dark-field scanning transmission electron microscopy demonstrate subtle control of the supported metal structures from ∼1 nm nanoparticles to site-isolated single Pt atoms via reversible interconversion of one species into another in reducing and oxidizing atmospheres. The combined used of microscopy and spectroscopy is critical to understand these surface-mediated transformations. When tested in hydrogenation reactions, Pt/CHA converts ethylene (∼80%) but not propylene under identical conditions, in contrast to Pt/SiO₂, which converts both at similar rates. These differences are attributed to the negligible diffusivity of propylene through the small-pore zeolite and provide final evidence of the metal encapsulation.

Emergent SO(5) Symmetry at the Néel to Valence-Bond-Solid Transition

We show numerically that the "deconfined" quantum critical point between the Néel antiferromagnet and the columnar valence-bond solid, for a square lattice of spin 1/2, has an emergent SO(5) symmetry. This symmetry allows the Néel vector and the valence-bond solid order parameter to be rotated into each other. It is a remarkable (2+1)-dimensional analogue of the SO(4)=[SU(2)×SU(2)]/Z(2) symmetry that appears in the scaling limit for the spin-1/2 Heisenberg chain. The emergent SO(5) symmetry is strong evidence that the phase transition in the (2+1)-dimensional system is truly continuous, despite the violations of finite-size scaling observed previously in this problem. It also implies surprising relations between correlation functions at the transition. The symmetry enhancement is expected to apply generally to the critical two-component Abelian Higgs model (noncompact CP(1) model). The result indicates that in three dimensions there is an SO(5)-symmetric conformal field theory that has no relevant singlet operators, so is radically different from conventional Wilson-Fisher-type conformal field theories.

Molecular metal catalysts on supports: organometallic chemistry meets surface science

Recent advances in the synthesis and characterization of small, essentially molecular metal complexes and metal clusters on support surfaces have brought new insights to catalysis and point the way to systematic catalyst design. We summarize recent work unraveling effects of key design variables of site-isolated catalysts: the metal, metal nuclearity, support, and other ligands on the metals, also considering catalysts with separate, complementary functions on supports. The catalysts were synthesized with the goal of structural simplicity and uniformity to facilitate incisive characterization. Thus, they are essentially molecular species bonded to porous supports chosen for their high degree of uniformity; the supports are crystalline aluminosilicates (zeolites) and MgO. The catalytic species are synthesized in reactions of organometallic precursors with the support surfaces; the precursors include M(L)2(acetylacetonate)1-2, with M = Ru, Rh, Ir, or Au and the ligands L = C2H4, CO, or CH3. Os3(CO)12 and Ir4(CO)12 are used as precursors of supported metal clusters, and some such catalysts are made by ship-in-a-bottle syntheses to trap the clusters in zeolite cages. The simplicity and uniformity of the supported catalysts facilitate precise structure determinations, even in reactive atmospheres and during catalysis. The methods of characterizing catalysts in reactive atmospheres include infrared (IR), extended X-ray absorption fine structure (EXAFS), X-ray absorption near edge structure (XANES), and nuclear magnetic resonance (NMR) spectroscopies, and complementary methods include density functional theory and atomic-resolution aberration-corrected scanning transmission electron microscopy for imaging of individual metal atoms. IR, NMR, XANES, and microscopy data demonstrate the high degrees of uniformity of well-prepared supported species. The characterizations determine the compositions of surface metal complexes and clusters, including the ligands and the metal-support bonding and structure, which identify the supports as ligands with electron-donor properties that influence reactivity and catalysis. Each of the catalyst design variables has been varied independently, illustrated by mononuclear and tetranuclear iridium on zeolite HY and on MgO and by isostructural rhodium and iridium (diethylene or dicarbonyl) complexes on these supports. The data provide examples resolving the roles of the catalyst design variables and place the catalysis science on a firm foundation of organometallic chemistry linked with surface science. Supported molecular catalysts offer the advantages of characterization in the absence of solvents and with surface-science methods that do not require ultrahigh vacuum. Families of supported metal complexes have been made by replacement of ligands with others from the gas phase. Spectroscopically identified catalytic reaction intermediates help to elucidate catalyst performance and guide design. The methods are illustrated for supported complexes and clusters of rhodium, iridium, osmium, and gold used to catalyze reactions of small molecules that facilitate identification of the ligands present during catalysis: alkene dimerization and hydrogenation, H-D exchange in the reaction of H2 with D2, and CO oxidation. The approach is illustrated with the discovery of a highly active and selective MgO-supported rhodium carbonyl dimer catalyst for hydrogenation of 1,3-butadiene to give butenes.

Towards a zero-waste oxidative coupling of nonactivated aromatics by supported gold nanoparticles

We show that gold nanoparticles are able to perform the direct oxidative coupling of nonactivated aromatics with O2 as the only co-reagent. In this reaction, the aromatic acts both as reactant and solvent. Biphenyl, for example, can be obtained from benzene with high selectivity and a turnover number (TON) of 230 per pass. Similarly, several substituted biaryls can be prepared. Pd performs only one TON and even when a second catalytic functionality is introduced, together with strong acidic conditions, TON is always lower than 100. Other catalysts require iodine for performing the reaction, leading to 2 kg of waste for 1 kg of biphenyl formed, whereas no waste is created by the oxidative coupling with gold nanoparticles.

Length distributions in loop soups

Statistical lattice ensembles of loops in three or more dimensions typically have phases in which the longest loops fill a finite fraction of the system. In such phases it is natural to ask about the distribution of loop lengths. We show how to calculate moments of these distributions using CP(n-1) or RP(n-1) and O(n) σ models together with replica techniques. The resulting joint length distribution for macroscopic loops is Poisson-Dirichlet with a parameter θ fixed by the loop fugacity and by symmetries of the ensemble. We also discuss features of the length distribution for shorter loops, and use numerical simulations to test and illustrate our conclusions.

3D loop models and the CP(n-1) sigma model

Many statistical mechanics problems can be framed in terms of random curves; we consider a class of three-dimensional loop models that are prototypes for such ensembles. The models show transitions between phases with infinite loops and short-loop phases. We map them to CP(n-1) sigma models, where n is the loop fugacity. Using Monte Carlo simulations, we find continuous transitions for n=1, 2, 3, and first order transitions for n≥5. The results are relevant to line defects in random media, as well as to Anderson localization and (2+1)-dimensional quantum magnets.

Zeolite-supported rhodium complexes and clusters: switching catalytic selectivity by controlling structures of essentially molecular species

Precise synthesis and characterization of site-isolated rhodium complexes and extremely small rhodium clusters supported on zeolite HY allow control of the catalyst selectivity in the conversion of ethene to n-butene or ethane, respectively, as a result of tuning the structure of the active sites at a molecular level.

Influence of recycled aggregate quality and proportioning criteria on recycled concrete properties

This paper presents the results of experimental research using concrete produced by substituting part of the natural coarse aggregates with recycled aggregates from concrete demolition. The influence of the quality of the recycled aggregate (amount of declassified and source of aggregate), the percentage of replacement on the targeted quality of the concrete to be produced (strength and workability) has been evaluated. The granular structure of concrete and replacement criteria were analyzed in this study, factors which have not been analyzed in other studies. The following properties of recycled concretes were analyzed: density, absorption, compressive strength, elastic modulus, amount of occluded air, penetration of water under pressure and splitting tensile strength. A simplified test program was designed to control the costs of the testing while still producing sufficient data to develop reliable conclusions in order to make the number of tests viable whilst guaranteeing the reliability of the conclusions. Several factors were analyzed including the type of aggregate, the percentage of replacement, the type of sieve curve, the declassified content, the strength of concrete and workability of concrete and the replacement criteria. The type of aggregate and the percentage of replacement were the only factors that showed a clear influence on most of the properties. Compressive strength is clearly affected by the quality of recycled aggregates. If the water-cement ratio is kept constant and the loss of workability due to the effect of using recycled aggregate is compensated for with additives, the percentage of replacement of the recycled aggregate will not affect the compressive strength. The elastic modulus is affected by the percentage of replacement. If the percentage of replacement does not exceed 50%, the elastic modulus will only change slightly.

Chemoselective synthesis of substituted imines, secondary amines, and beta-amino carbonyl compounds from nitroaromatics through cascade reactions on gold catalysts

Substituted imines, alpha,beta-unsaturated imines, substituted secondary amines, and beta-amino carbonyl compounds have been synthesized by means of new cascade reactions with mono- or bifunctional gold-based solid catalysts under mild reaction conditions. The related synthetic route involves the hydrogenation of a nitroaromatic compound in the presence of a second reactant such as an aldehyde, alpha,beta-unsaturated carbonyl compound, or alkyne, which circumvents an ex situ reduction process for producing the aromatic amine. The process is shown to be highly selective towards other competing groups, such as double bonds, carbonyls, halogens, nitriles, or cinnamates, and thereby allows the synthesis of different substituted nitrogenated compounds. For the preparation of imines, substituted anilines are formed and condensed in situ with aldehydes to provide the final product through two tandem reactions. High chemoselectivity is observed, for instance, when double bonds or halides are present within the reactants. In addition, we show that the Au/TiO2 system is also able to catalyze the chemoselective hydrogenation of imines, so that secondary amines can be prepared directly through a three-step cascade reaction by starting from nitroaromatic compounds and aldehydes. On the other hand, Au/TiO2 can also be used as a bifunctional catalyst to obtain substituted beta-amino carbonyl compounds from nitroaromatics and alpha,beta-unsaturated carbonyl compounds. Whereas gold sites promote the in situ formation of anilines, the intrinsic acidity of Ti species on the support surface accelerates the subsequent Michael addition. Finally, two gold-catalyzed reactions, that is, the hydrogenation of nitro groups and a hydroamination, have been coupled to synthesize additional substituted imines from nitroaromatic compounds and alkynes.

A Molecular mechanism for the chemoselective hydrogenation of substituted nitroaromatics with nanoparticles of gold on TiO2 catalysts: a cooperative effect between gold and the support

Nanoparticles of gold on TiO2 are highly chemoselective for the reduction of substituted nitroaromatics, such as nitrostyrene. By combining kinetics and in situ IR spectroscopy, it has been found that there is a preferential adsorption of the reactant on the catalyst through the nitro group. IR studies of nitrobenzene, styrene, and nitrostyrene adsorption, together with quantum chemical calculations, show that the nitro and the olefinic groups adsorb weakly on the Au(111) and Au(001) surfaces, and that although a stronger adsorption occurs on low-coordinated atoms in gold nanoparticles, this adsorption is not selective. On the other hand, an energetically and geometrically favored adsorption through the nitro group occurs on the TiO2 support and in the interface between the gold nanoparticle and the TiO2 support. Such preferential adsorption is not observed with nanoparticles of gold on silica which, contrary to the Au/TiO2 catalyst, is not chemoselective for the reduction of substituted nitroaromatic compounds. Therefore, the high chemoselectiviy of the Au/TiO2 catalyst can be attributed to a cooperation between the gold nanoparticle and the support that preferentially activates the nitro group.

Awareness and consumption of folate-fortified foods by women of childbearing age in Western Australia

Objectives

The introduction of voluntary fortification of some foods with folic acid in Australia has been implemented since evidence of the prevention of neural tube defects with periconceptional folic acid was published. Our objectives were to determine how many women were aware of folate and when they became aware, what was the awareness of labels on foods that mentioned folate, and how much folate-fortified food women ate.

Methods

To address these objectives we collected data by self-administered questionnaire from a random sample of 578 recently pregnant women in Western Australia between September 1997 and March 2000.

Results

Overall, 89% of women had heard, seen or read anything about the link between folate and birth defects such as spina bifida, 62% first became aware of the folate message before their recent pregnancy and 42% of women noticed any labels on foods that mention folate before or during their recent pregnancy. Overall, 53% of women were aware of foods that have folate added to them and 33% usually or always read the labels on food packaging. The folate-fortified foods most often consumed by women were cereals (69%), breads (34%) and milk (15%). Of the women who consumed folate-fortified foods (78%), the earlier they became aware of the folate message and noticed labels on food, the more fortified foods they consumed.

Conclusions

These results indicate that staple foods fortified with folate are consumed by almost 80% of women in the population. Therefore, mandatory fortification of staple foods may reach most women, providing improved opportunity for the prevention of neural tube defects in Australia.