Adding abiraterone or docetaxel to long-term hormone therapy for prostate cancer: directly randomised data from the STAMPEDE multi-arm, multi-stage platform protocol

Background

Adding abiraterone acetate with prednisolone (AAP) or docetaxel with prednisolone (DocP) to standard-of-care (SOC) each improved survival in systemic therapy for advanced or metastatic prostate cancer: evaluation of drug efficacy: a multi-arm multi-stage platform randomised controlled protocol recruiting patients with high-risk locally advanced or metastatic PCa starting long-term androgen deprivation therapy (ADT). The protocol provides the only direct, randomised comparative data of SOC + AAP versus SOC + DocP.

Method

Recruitment to SOC + DocP and SOC + AAP overlapped November 2011 to March 2013. SOC was long-term ADT or, for most non-metastatic cases, ADT for ≥2 years and RT to the primary tumour. Stratified randomisation allocated pts 2 : 1 : 2 to SOC; SOC + docetaxel 75 mg/m2 3-weekly×6 + prednisolone 10 mg daily; or SOC + abiraterone acetate 1000 mg + prednisolone 5 mg daily. AAP duration depended on stage and intent to give radical RT. The primary outcome measure was death from any cause. Analyses used Cox proportional hazards and flexible parametric models, adjusted for stratification factors. This was not a formally powered comparison. A hazard ratio (HR) <1 favours SOC + AAP, and HR > 1 favours SOC + DocP.

Results

A total of 566 consenting patients were contemporaneously randomised: 189 SOC + DocP and 377 SOC + AAP. The patients, balanced by allocated treatment were: 342 (60%) M1; 429 (76%) Gleason 8-10; 449 (79%) WHO performance status 0; median age 66 years and median PSA 56 ng/ml. With median follow-up 4 years, 149 deaths were reported. For overall survival, HR = 1.16 (95% CI 0.82-1.65); failure-free survival HR = 0.51 (95% CI 0.39-0.67); progression-free survival HR = 0.65 (95% CI 0.48-0.88); metastasis-free survival HR = 0.77 (95% CI 0.57-1.03); prostate cancer-specific survival HR = 1.02 (0.70-1.49); and symptomatic skeletal events HR = 0.83 (95% CI 0.55-1.25). In the safety population, the proportion reporting ≥1 grade 3, 4 or 5 adverse events ever was 36%, 13% and 1% SOC + DocP, and 40%, 7% and 1% SOC + AAP; prevalence 11% at 1 and 2 years on both arms. Relapse treatment patterns varied by arm.

Conclusions

This direct, randomised comparative analysis of two new treatment standards for hormone-naïve prostate cancer showed no evidence of a difference in overall or prostate cancer-specific survival, nor in other important outcomes such as symptomatic skeletal events. Worst toxicity grade over entire time on trial was similar but comprised different toxicities in line with the known properties of the drugs.

Trial registration

Clinicaltrials.gov: NCT00268476.

Convergent validity of actigraphy with polysomnography and parent reports when measuring sleep in children with Down syndrome

BACKGROUND

There is a need for rigorous measures of sleep in children with Down syndrome as sleep is a substantial problem in this population and there are barriers to obtaining the gold standard polysomnography (PSG). PSG is cost-prohibitive when measuring treatment effects in some clinical trials, and children with Down syndrome may not cooperate with undergoing a PSG. Minimal information is available on the validity of alternative methods of assessing sleep in children with Down syndrome, such as actigraphy and parent ratings. Our study examined the concurrent and convergent validity of different measures of sleep, including PSG, actigraphy and parent reports of sleep among children with Down syndrome.

METHOD

A clinic (n = 27) and a community (n = 47) sample of children with Down syndrome were examined. In clinic, children with Down syndrome wore an actigraph watch during a routine PSG. In the community, children with Down syndrome wore an actigraph watch for a week at home at night as part of a larger study on sleep and behaviour. Their parent completed ratings of the child's sleep during that same week.

RESULTS

Actigraph watches demonstrated convergent validity with PSG when measuring a child with Down syndrome's total amount of sleep time, total wake time after sleep onset and sleep period efficiency. In contrast, actigraph watches demonstrated poor correlations with parent reports of sleep, and with PSG when measuring the total time in bed and total wake episodes. Actigraphy, PSG and parent ratings of sleep demonstrated poor concurrent validity with clinical diagnosis of obstructive sleep apnoea.

CONCLUSION

Our current data suggest that actigraph watches demonstrate convergent validity and are sensitive to measuring certain sleep constructs (duration, efficiency) in children with Down syndrome. However, parent reports, such as the Children's Sleep Habits Questionnaire, may be measuring other sleep constructs. These findings highlight the importance of selecting measures of sleep related to target concerns.

Recommended test methods and pass/fail criteria for a respirator fit capability test of half-mask air-purifying respirators

This study assessed key test parameters and pass/fail criteria options for developing a respirator fit capability (RFC) test for half-mask air-purifying particulate respirators. Using a 25-subject test panel, benchmark RFC data were collected for 101 National Institute for Occupational Safety and Health-certified respirator models. These models were further grouped into 61 one-, two-, or three-size families. Fit testing was done using a PortaCount® Plus with N95-Companion accessory and an Occupational Safety and Health Administration-accepted quantitative fit test protocol. Three repeated tests (donnings) per subject/respirator model combination were performed. The panel passing rate (PPR) (number or percentage of the 25-subject panel achieving acceptable fit) was determined for each model using five different alternative criteria for determining acceptable fit. When the 101 models are evaluated individually (i.e., not grouped by families), the percentages of models capable of fitting >75% (19/25 subjects) of the panel were 29% and 32% for subjects achieving a fit factor ≥100 for at least one of the first two donnings and at least one of three donnings, respectively. When the models are evaluated grouped into families and using >75% of panel subjects achieving a fit factor ≥100 for at least one of two donnings as the PPR pass/fail criterion, 48% of all models can pass. When >50% (13/25 subjects) of panel subjects was the PPR criterion, the percentage of passing models increased to 70%. Testing respirators grouped into families and evaluating the first two donnings for each of two respirator sizes provided the best balance between meeting end user expectations and creating a performance bar for manufacturers. Specifying the test criterion for a subject obtaining acceptable fit as achieving a fit factor ≥100 on at least one out of the two donnings is reasonable because a majority of existing respirator families can achieve an PPR of >50% using this criterion. The different test criteria can be considered by standards development organizations when developing standards.

Prevalence of Respiratory Protective Devices in U.S. Health Care Facilities: Implications for Emergency Preparedness

An online questionnaire was developed to explore respiratory protective device (RPD) prevalence in U.S. health care facilities. The survey was distributed to professional nursing society members in 2014 and again in 2015 receiving 322 and 232 participant responses, respectively. The purpose of this study was to explore if the emergency preparedness climate associated with Ebola virus disease changed the landscape of RPD use and awareness. Comparing response percentages from the two sampling time frames using bivariate analysis, no significant changes were found in types of RPDs used in health care settings. N95 filtering facepiece respirators continue to be the most prevalent RPD used in health care facilities, but powered air-purifying respirators are also popular, with regional use highest in the West and Midwest. Understanding RPD use prevalence could ensure that health care workers receive appropriate device trainings as well as improve supply matching for emergency RPD stockpiling.

A comparison of facemask and respirator filtration test methods

NIOSH published a Federal Register Notice to explore the possibility of incorporating FDA required filtration tests for surgical masks (SMs) in the 42 CFR Part 84 respirator certification process. There have been no published studies comparing the filtration efficiency test methods used for NIOSH certification of N95 filtering facepiece respirators (N95 FFRs) with those used by the FDA for clearance of SMs. To address this issue, filtration efficiencies of "N95 FFRs" including six N95 FFR models and three surgical N95 FFR models, and three SM models were measured using the NIOSH NaCl aerosol test method, and FDA required particulate filtration efficiency (PFE) and bacterial filtration efficiency (BFE) methods, and viral filtration efficiency (VFE) method. Five samples of each model were tested using each method. Both PFE and BFE tests were done using unneutralized particles as per FDA guidance document. PFE was measured using 0.1 µm size polystyrene latex particles and BFE with ∼3.0 µm size particles containing Staphylococcus aureus bacteria. VFE was obtained using ∼3.0 µm size particles containing phiX 174 as the challenge virus and Escherichia coli as the host. Results showed that the efficiencies measured by the NIOSH NaCl method for "N95 FFRs" were from 98.15-99.68% compared to 99.74-99.99% for PFE, 99.62-99.9% for BFE, and 99.8-99.9% for VFE methods. Efficiencies by the NIOSH NaCl method were significantly (p = <0.05) lower than the other methods. SMs showed lower efficiencies (54.72-88.40%) than "N95 FFRs" measured by the NIOSH NaCl method, while PFE, BFE, and VFE methods produced no significant difference. The above results show that the NIOSH NaCl method is relatively conservative and is able to identify poorly performing filtration devices. The higher efficiencies obtained using PFE, BFE and VFE methods show that adding these supplemental particle penetration methods will not improve respirator certification.

Effect of multiple alcohol-based hand rub applications on the tensile properties of thirteen brands of medical exam nitrile and latex gloves

Current CDC guidance for the disinfection of gloved hands during the doffing of personal protective equipment (PPE) following the care of a patient with Ebola recommends for multiple applications of alcohol-based hand rub (ABHR) on medical exam gloves. To evaluate possible effects of ABHR applications on glove integrity, thirteen brands of nitrile and latex medical exam gloves from five manufacturers and two different ABHRs were included in this study. A pair of gloves were worn by a test operator and the outside surfaces of the gloves were separately treated with an ABHR for 1-6 applications. Tensile strength and ultimate elongation of the gloves without any ABHR treatments (control gloves) and gloves after 1-6 ABHR applications were measured based on the ASTM D412 standard method. In general, tensile strength decreased with each ABHR application. ABHRs had more effect on the tensile strength of the tested nitrile than latex gloves, while ethanol-based ABHR (EBHR) resulted in lesser changes in tensile strength compared to isopropanol-based ABHR (IBHR). The results show that multiple EBHR applications on the latex gloves and some of the nitrile gloves tested should be safe for Ebola PPE doffing based on the CDC guidance. Appropriate hospital staff practice using ABHR treatment and doffing gloves is recommended to become more familiar with changes in glove properties.

Evaluation of gowns and coveralls used by medical personnel working with Ebola patients against simulated bodily fluids using an Elbow Lean Test

Gowns and coveralls are important components of protective ensembles used during the management of known or suspected Ebola patients. In this study, an Elbow Lean Test was used to obtain a visual semi-quantitative measure of the resistance of medical protective garments to the penetration of two bodily fluid simulants. Tests were done on swatches of continuous and discontinuous regions of fabrics cut from five gowns and four coveralls at multiple elbow pressure levels (2-44 PSI). Swatches cut from the continuous regions of one gown and two coveralls did not have any strike-through. For discontinuous regions, only the same gown consistently resisted fluid strike-through. As hypothesized, with the exception of one garment, fluid strike-through increased with higher applied elbow pressure, was higher for lower fluid surface tension, and was higher for the discontinuous regions of the protective garments.

Temporal changes in filtering-facepiece respirator fit

A three-year study examined changes in N95 filtering-facepiece respirator (FFR) fit at six-month intervals and the relationship between fit and changes in weight for 229 subjects. During each visit, subjects performed a total of nine fit tests using three samples of the same FFR model. Inward leakage and filter penetration were measured for each donned respirator to determine face seal leakage (FSL). A total of 195 subjects completed the second visit and 134 subjects completed all seven visits. Acceptable fit was defined as 90th percentile FSL ≤ 5% and at least one fit factor ≥ 100. An unacceptable fit was observed for 14, 10, 7, 12, 15, and 16% of subjects on Visits 2-7, respectively. The predicted risk of an unacceptable fit increased with increasing length of time between fit tests, from 10% at Year 1 to 20% at Year 2 and to 25% at Year 3. Twenty-four percent of subjects who lost ≥ 20 lb had an unacceptable fit; these percentages ranged from 7-17% for subjects with lower weight losses or any degree of weight gain. Results support the current OSHA requirement for annual fit testing and suggest that respirator users who lose more than 20 lb should be re-tested for respirator fit.

Resistance to synthetic blood penetration of National Institute for Occupational Safety and Health-approved N95 filtering facepiece respirators and surgical N95 respirators

BACKGROUND

Surgical N95 filtering facepiece respirators (FFRs), certified by the National Institute for Occupational Safety and Health (NIOSH) as a respirator and cleared by the Food and Drug Administration (FDA) as a surgical mask, are often used to protect from the inhalation of infectious aerosols and from splashes/sprays of body fluids in health care facilities. A shortage of respirators can be expected during a pandemic. The availability of surgical N95 FFRs can potentially be increased by incorporating FDA clearance requirements in the NIOSH respirator approval process.

METHODS

Fluid resistance of NIOSH-approved N95 FFRs, and FDA-cleared surgical N95 FFRs and surgical masks was tested using the ASTM F1862 method at 450 and 635 cm/sec velocities and compared with the results from a third-party independent laboratory. Blood penetration through different layers of filter media of masks were also analyzed visually.

RESULTS

Four N95 FFR models showed no test failures at both velocities. The penetration results obtained in the NIOSH laboratory were comparable to those from the third-party independent laboratory. The number of respirator samples failing the test increased with increasing test velocity.

CONCLUSIONS

The results indicate that several NIOSH-approved N95 FFR models would likely pass FDA clearance requirements for resistance to synthetic blood penetration.

Criteria for the collection of useful respirator performance data in the workplace

Workplace protection factors (WPFs) are intended to measure the ability of a respiratory protective device (RPD) to reduce contaminant exposure when used in the context of an effective respiratory protection program. In 1992, members of the American Industrial Hygiene Association Respiratory Protection Committee (RPC) published a review of important issues and considerations for measuring respirator performance in the workplace. The RPC recognized that respirator testing in workplaces can have a variety of objectives and endpoints, and that not all workplace measurements are WPFs. That paper addressed concerns in the general categories of 1) study objectives; 2) site selection; 3) subject selection and preparation; 4) sampling and analytical methods; and 5) data analysis. No specific protocol for measuring WPFs was recommended by the RPC, and attempts to reach a U.S. consensus on a WPF protocol since 1992 have not succeeded. Numerous studies have implemented the principles for WPF measurement described in the RPC paper. Modifications to the original recommendations have been made to reflect the current state of the art. This article describes what has been learned in recent years in each of the five categories identified in the 1992 discussion. Because of the wide variety of workplaces and work activities, contaminants and respiratory protective devices, a strict protocol is not appropriate for collecting WPF data. Rather, the minimum requirements for the collection and presentation of meaningful respirator performance data in the workplace are described. Understanding of these principles will permit useful RPD performance data to be generated.

Infrared imaging for leak detection of N95 filtering facepiece respirators: a pilot study

BACKGROUND

This study was undertaken to determine the utility of an infrared camera (IRC) for assessing leaks around filtering facepiece respirators (FFR) during quantitative respirator fit testing.

METHODS

Eight subjects underwent quantitative fit testing on six N95 FFR models (48 total fit tests) while simultaneously being recorded with an IRC.

RESULTS

The IRC detected 49 exhalation leaks during 39 tests and no leaks in nine tests. Exhalation leaks were identified in all failed fit tests (13) and a majority (26 of 35) of passed tests. Anatomically, the nasal region and malar (cheekbone) regions accounted for 71% of identified leak sites. Fit factors for fit tests without identified exhalation leaks were significantly higher than fit tests with leaks detected by IRC (P = 0.01).

CONCLUSIONS

Thermal imaging using IRC can detect leaks in respiratory protective equipment and has the potential as a screening tool for assessment of the adequacy of post-donning FFR fit.

Evaluation of nano- and submicron particle penetration through ten nonwoven fabrics using a wind-driven approach

Existing face mask and respirator test methods draw particles through materials under vacuum to measure particle penetration. However, these filtration-based methods may not simulate conditions under which protective clothing operates in the workplace, where airborne particles are primarily driven by wind and other factors instead of being limited to a downstream vacuum. This study was focused on the design and characterization of a method simulating typical wind-driven conditions for evaluating the performance of materials used in the construction of protective clothing. Ten nonwoven fabrics were selected, and physical properties including fiber diameter, fabric thickness, air permeability, porosity, pore volume, and pore size were determined. Each fabric was sealed flat across the wide opening of a cone-shaped penetration cell that was then housed in a recirculation aerosol wind tunnel. The flow rate naturally driven by wind through the fabric was measured, and the sampling flow rate of the Scanning Mobility Particle Sizer used to measure the downstream particle size distribution and concentrations was then adjusted to minimize filtration effects. Particle penetration levels were measured under different face velocities by the wind-driven method and compared with a filtration-based method using the TSI 3160 automated filter tester. The experimental results show that particle penetration increased with increasing face velocity, and penetration also increased with increasing particle size up to about 300 to 500 nm. Penetrations measured by the wind-driven method were lower than those obtained with the filtration method for most of the fabrics selected, and the relative penetration performances of the fabrics were very different due to the vastly different pore structures.

Facial anthropometric differences among gender, ethnicity, and age groups

OBJECTIVES

The impact of race/ethnicity upon facial anthropometric data in the US workforce, on the development of personal protective equipment, has not been investigated to any significant degree. The proliferation of minority populations in the US workforce has increased the need to investigate differences in facial dimensions among these workers. The objective of this study was to determine the face shape and size differences among race and age groups from the National Institute for Occupational Safety and Health survey of 3997 US civilian workers.

METHODS

Survey participants were divided into two gender groups, four racial/ethnic groups, and three age groups. Measurements of height, weight, neck circumference, and 18 facial dimensions were collected using traditional anthropometric techniques. A multivariate analysis of the data was performed using Principal Component Analysis. An exploratory analysis to determine the effect of different demographic factors had on anthropometric features was assessed via a linear model. The 21 anthropometric measurements, body mass index, and the first and second principal component scores were dependent variables, while gender, ethnicity, age, occupation, weight, and height served as independent variables.

RESULTS

Gender significantly contributes to size for 19 of 24 dependent variables. African-Americans have statistically shorter, wider, and shallower noses than Caucasians. Hispanic workers have 14 facial features that are significantly larger than Caucasians, while their nose protrusion, height, and head length are significantly shorter. The other ethnic group was composed primarily of Asian subjects and has statistically different dimensions from Caucasians for 16 anthropometric values. Nineteen anthropometric values for subjects at least 45 years of age are statistically different from those measured for subjects between 18 and 29 years of age. Workers employed in manufacturing, fire fighting, healthcare, law enforcement, and other occupational groups have facial features that differ significantly than those in construction.

CONCLUSIONS

Statistically significant differences in facial anthropometric dimensions (P < 0.05) were noted between males and females, all racial/ethnic groups, and the subjects who were at least 45 years old when compared to workers between 18 and 29 years of age. These findings could be important to the design and manufacture of respirators, as well as employers responsible for supplying respiratory protective equipment to their employees.

Development of a test system to evaluate procedures for decontamination of respirators containing viral droplets

The aim of this study was to develop a test system to evaluate the effectiveness of procedures for decontamination of respirators contaminated with viral droplets. MS2 coliphage was used as a surrogate for pathogenic viruses. A viral droplet test system was constructed, and the size distribution of viral droplets loaded directly onto respirators was characterized using an aerodynamic particle sizer. The sizes ranged from 0.5 to 15 mum, and the sizes of the majority of the droplets were the range from 0.74 to 3.5 mum. The results also showed that the droplet test system generated similar droplet concentrations (particle counts) at different respirator locations. The test system was validated by studying the relative efficiencies of decontamination of sodium hypochlorite (bleach) and UV irradiation with droplets containing MS2 virus on filtering facepiece respirators. It was hypothesized that more potent decontamination treatments would result in corresponding larger decreases in the number of viable viruses recovered from the respirators. Sodium hypochlorite doses of 2.75 to 5.50 mg/liter with a 10-min decontamination period resulted in approximately 3- to 4-log reductions in the level of MS2 coliphage. When higher sodium hypochlorite doses (> or =8.25 mg/liter) were used with the same contact time that was used for the dilute solutions containing 2.75 to 5.50 mg/liter, all MS2 was inactivated. For UV decontamination at a wavelength of 254 nm, an approximately 3-log reduction in the level of MS2 virus was achieved with dose of 4.32 J/cm(2) (3 h of contact time with a UV intensity of 0.4 mW/cm(2)), while with higher doses of UV irradiation (> or =7.20 J/cm(2); UV intensity, 0.4 mW/cm(2); contact times, > or =5 h), all MS2 was inactivated. These findings may lead to development of a standard method to test decontamination of respirators challenged by viral droplets.

Volumetric modulated Arc therapy and conventional intensity-modulated radiotherapy for simultaneous maximal intraprostatic boost: a planning comparison study

AIMS

Volumetric modulated arc therapy (VMAT) is a novel extension of intensity-modulated radiotherapy (IMRT) where an optimised three-dimensional dose distribution may be delivered in a single gantry rotation. This optimisation algorithm is the predecessor to Varian's RapidArc. The aim of this study was to compare the ability of conventional static nine-field IMRT (cIMRT) and VMAT to boost as much of the clinical target volume (CTV) as possible to 88.8Gy without exceeding organ at risk (OAR) dose-volume constraints.

MATERIALS AND METHODS

Optimal cIMRT and VMAT radiotherapy plans were produced for 10 patients with localised prostate cancer using common planning objectives: (1) Treat >or=98% of the planning target volume (PTV) to >or=95% of the prescription dose (74Gy in 37 fractions); (2) keep OAR doses within predefined limits; (3) treat as much of prostate CTV (minus urethra) as possible to >or=120% of prescription dose (=88.8Gy); (4) keep within maximum dose limits in and out of target volumes; (5) conformality index (volume of 95% isodose/volume of PTV)<or=1.2.

RESULTS

VMAT and cIMRT boosted an average of 68.8 and 63.5% of the CTV to >or=120% of the prescription dose (P=0.002). All dose constraints were kept within predefined limits. VMAT and cIMRT required an average of 949 and 1819 monitor units and 3.7 and 9.6min, respectively, to deliver a single radiation fraction.

CONCLUSIONS

VMAT is able to boost more of the CTV to >or=120% than cIMRT without contravening OAR dose constraints, and uses 48% fewer monitor units. Treatment times were 61% less than with cIMRT.

Review of chamber design requirements for testing of personal protective clothing ensembles

This review focuses on the physical requirements for conducting ensemble testing and describes the salient issues that organizations involved in the design, test, or certification of personal protective equipment (PPE) and protective clothing ensembles need to consider for strategic planning. Several current and proposed PPE ensemble test practices and standards were identified. The man-in-simulant test (MIST) is the primary procedure used by the military to evaluate clothing ensembles for protection against chemical and biological warfare agents. MIST has been incorporated into the current editions of protective clothing and equipment standards promulgated by the National Fire Protection Association (NFPA). ASTM has recently developed a new test method (ASTM F 2588-06) for MIST evaluation of protective ensembles. Other relevant test methods include those described in International Organization for Standardization (ISO) standards. The primary differences among the test methods were the choice of test challenge material (e.g., sulfur hexafluoride, methyl salicylate, sodium chloride particles, corn oil, fluorophore-impregnated silica) and the exercise protocol for the subject(s). Although ensemble test methods and standards provide detailed descriptions of the test procedures, none give specific requirements for chamber design. A literature survey identified 28 whole-body exposure chambers that have been or could potentially be used for testing protective clothing ensembles using human test subjects. Median chamber size, median floor space, and median volume per subject were calculated from 15 chambers (involving human test subjects), where size information is available. Based on the literature survey of existing chambers and the review of the current and proposed standards and test methods, chamber design requirements will be dictated by the test methods selected. Due to widely different test conditions for aerosol/particulate and vapor ensemble testing, it is unlikely that a single chamber could accommodate all types of ensemble testing. With increasing use of the MIST protocol by NFPA for CBRN certification of structural firefighting gear and protective ensembles for first responders, the need for MIST laboratory capability is clear. However, existing chambers can likely be adapted to accommodate MIST with some modifications.

Prevalence and associations of vitamin D deficiency in foreign-born persons with tuberculosis in London

OBJECTIVES

The incidence of tuberculosis (TB) is high amongst foreign-born persons resident in developed countries. Vitamin D is important in the host defence against TB in vitro and deficiency may be an acquired risk factor for this disease. We aimed to determine the incidence and associations of vitamin D deficiency in TB patients diagnosed at an infectious diseases unit in London, UK.

METHODS

Case-note analysis of 210 unselected patients diagnosed with TB who had plasma vitamin D (25(OH)D3) levels routinely measured. Prevalence of 25(OH)D3 deficiency and its relationship to ethnic origin, religion, site of TB, sex, age, duration in the UK, month of 25(OH)D3 estimation and TB diagnosis were determined.

RESULTS

Of 210 patients 76% were 25(OH)D3 deficient and 56% had undetectable levels. 70/82 Indian, 24/28 East African Asian, 29/34 Somali, 14/19 Pakistani and Afghani, 16/22 Sri Lankan and 2/6 other African patients were deficient (with 58, 17, 23, 9, 6 and 1 having undetectable levels, respectively). Only 0/6 white Europeans and 1/8 Chinese/South East Asians had low plasma 25(OH)D3 levels. Muslims, Hindus and Sikhs all had equivalent rates of deficiency though Hindus were more likely to have undetectable levels (odds ratio 1.87, 95% CI 1.27-2.76). There was no significant association between 25(OH)D3 level and site of TB or duration of residence in the UK. There was no apparent seasonal variation in either TB diagnosis or 25(OH)D3 level.

CONCLUSIONS

25(OH)D3 deficiency commonly associates with TB among all ethnic groups apart from white Europeans, and Chinese/South East Asians. Our data support a lack of sunlight exposure and potentially a vegetarian diet as contributors to this deficiency.

Chlamydial infection and unplanned pregnancy in women with ready access to health care

OBJECTIVE

To apply urine-based ligase chain reaction for Chlamydia trachomatis (C. trachomatis) and Neisseria gonorrhoeae (N. gonorrhoeae) detection and standard urine-based pregnancy testing for Navy-enlisted women, and to compare the prevalence and epidemiologic correlates of these adverse reproductive outcomes.

METHODS

Participants were surveyed and urine was collected for pregnancy testing using standard laboratory methods and detection of C. trachomatis and N. gonorrhoeae infection by ligase chain reaction. Self-administered surveys facilitated collection of demographics, sexual behavior, including contraceptive use, sexual partners, sexually transmitted disease, and pregnancy history.

RESULTS

Among 299 of 314 participants, the prevalence of chlamydial infection was 4.7% and of pregnancy was 9.7%, with 48.3% of the pregnancies unplanned. Chlamydia trachomatis infection was univariately associated with having a new sex partner within the last 6 months, more sexual partners, single marital status, condom use, drinking until passing out or vomiting in the past 30 days (alcohol misuse), and current pregnancy. Unplanned pregnancy was univariately associated with young age, single marital status, inconsistent condom use, having a new sex partner within the last 6 months, and more recent sexual partners. Among the pregnant women, four (13.8%) were infected with C. trachomatis.

CONCLUSION

The high rates of chlamydial infection and unplanned pregnancy found in this population of employed young women with ready access to health care and health education underscore the challenge of enhancing reproductive health via compliance with effective contraceptive and sexually transmitted disease prevention methods. This is a challenge that remains unmet.

Military training-related injuries: surveillance, research, and prevention

BACKGROUND

Musculoskeletal physical training-related injuries are a major problem in military populations. Injuries are important in terms of loss of time from work and training and decreased military readiness. The implications of these injuries in terms of patient morbidity, attrition rates, and training costs for military personnel are staggering. This article reviews: (1) pertinent epidemiologic literature on musculoskeletal injury rates; (2) injury type and location; and (3) risk factors for military populations. Suggestions for injury surveillance and prevention are also offered.

METHODS

Existing military and civilian epidemiologic studies were used to estimate and compare the size of the injury problem, identify risk factors, and test preventive measures. Most of the military research data obtained was from Marine and Army recruits, Army Infantry soldiers, and Naval Special Warfare candidates. Additional studies conducted in operational forces provided documentation of the injury problem in these populations as well.

RESULTS

Injury rates during military training are high, ranging from 6 to 12 per 100 male recruits per month during basic training to as high as 30 per 100 per month for Naval Special Warfare training. Data collected show a wide variation in injury rates that are dependent largely on the following risk factors: low levels of current physical fitness, low levels of previous occupational and leisure time physical activity, previous injury history, high running mileage, high amount of weekly exercise, smoking, age, and biomechanical factors. (Data are contradictory with respect to age.)

CONCLUSION

Considering the magnitude of training injuries in military populations, there is a substantial amount of work that remains to be performed, especially in the areas of surveillance, prevention, and treatment. Modifiable risk factors have been identified suggesting that overuse and other training injuries could be decreased with proper interventions. Outpatient surveillance systems are available to capture musculoskeletal injury data but need to be refined. Given the size of the problem, a systematic process of prevention should be initiated starting with routine surveillance to identify high-risk populations for the purpose of prioritizing research and prevention. Properly planned interventions should then be implemented with the expectation of dramatically reduced lost work/training time, attrition, and medical costs, while increasing military readiness.

Stress fractures of the pelvis in female navy recruits: an analysis of possible mechanisms of injury

The purpose of our study was to investigate possible risk factors and mechanisms for the development of pelvic stress fractures in female Navy recruits. We used a case-control retrospective study of female Navy recruits undergoing basic military training. We compared anthropometric and activity data between recruits with pelvic stress fractures (N = 25) and female recruits who completed training without injury (N = 61). Recruits developing pelvic stress fractures were significantly (p < 0.05) shorter and lighter and were more frequently Asian or Hispanic than recruits without stress fractures. In addition, recruits with pelvic stress fractures reported marching in the back of their training division, were road guards, and felt that their stride was too long during training activities more often than recruits without injury. Self-reported fitness, activities before recruit training, or a history of amenorrhea was not found to be associated with the development of a pelvic stress fracture in our population.

Preoperative ICU tours: are they helpful?

BACKGROUND: Although preoperative education decreases the anxiety of patients and family members, the usefulness of a preoperative tour of the ICU has not been studied. In this study, the effect of an ICU tour on the anxiety levels of patients (n = 92) and family members (n = 91) before and after cardiac surgery was examined. METHODS: Using a pretest-posttest quasi-experimental design, patients and family members were assigned to a control group, which received preoperative teaching only (patients, n = 48; family members, n = 48), or to an experimental group, which received preoperative teaching with an ICU tour (patients, n = 44; family members, n = 43). Patients and family members completed two measures of anxiety, the State Trait Anxiety Inventory and a visual analog scale, before and after the intervention. After their first postoperative visit, family members completed the measures again. Repeated measures analysis of variance was used to compare anxiety levels after the intervention. In addition, patients completed the Patient Perception of the ICU Tour Questionnaire after transfer from the ICU. RESULTS: Although patients and family members had a decrease in anxiety after cardia surgery teaching, the decrease was not due to an ICU tour. However, the majority of patients who toured the ICU perceived the tour as beneficial and recommended a tour for future patients. CONCLUSIONS: ICU tours are included in many cardiac surgery educational programs. The majority of patients in this study perceived a benefit or a future benefit from an ICU tour, even though the tour did not significantly reduce the anxiety of the patients or family members.

Preoperative ICU tours: are they helpful?

BACKGROUND

Although preoperative education decreases the anxiety of patients and family members, the usefulness of a preoperative tour of the ICU has not been studied. In this study, the effect of an ICU tour on the anxiety levels of patients (n = 92) and family members (n = 91) before and after cardiac surgery was examined.

METHODS

Using a pretest-posttest quasi-experimental design, patients and family members were assigned to a control group, which received preoperative teaching only (patients, n = 48; family members, n = 48), or to an experimental group, which received preoperative teaching with an ICU tour (patients, n = 44; family members, n = 43). Patients and family members completed two measures of anxiety, the State Trait Anxiety Inventory and a visual analog scale, before and after the intervention. After their first postoperative visit, family members completed the measures again. Repeated measures analysis of variance was used to compare anxiety levels after the intervention. In addition, patients completed the Patient Perception of the ICU Tour Questionnaire after transfer from the ICU.

RESULTS

Although patients and family members had a decrease in anxiety after cardia surgery teaching, the decrease was not due to an ICU tour. However, the majority of patients who toured the ICU perceived the tour as beneficial and recommended a tour for future patients.

CONCLUSIONS

ICU tours are included in many cardiac surgery educational programs. The majority of patients in this study perceived a benefit or a future benefit from an ICU tour, even though the tour did not significantly reduce the anxiety of the patients or family members.