1
|
Abstract
The use of face masks by the general population during viral outbreaks such as the COVID-19 pandemic, although at times controversial, has been effective in slowing down the spread of the virus. The extent to which face masks mitigate the transmission is highly dependent on how well the mask fits each individual. The fit of simple cloth masks on the face, as well as the resulting perimeter leakage and face mask efficacy, are expected to be highly dependent on the type of mask and facial topology. However, this effect has, to date, not been adequately examined and quantified. Here, we propose a framework to study the efficacy of different mask designs based on a quasi-static mechanical model of the deployment of face masks onto a wide range of faces. To illustrate the capabilities of the proposed framework, we explore a simple rectangular cloth mask on a large virtual population of subjects generated from a 3D morphable face model. The effect of weight, age, gender, and height on the mask fit is studied. The Centers for Disease Control and Prevention (CDC) recommended homemade cloth mask design was used as a basis for comparison and was found not to be the most effective design for all subjects. We highlight the importance of designing masks accounting for the widely varying population of faces. Metrics based on aerodynamic principles were used to determine that thin, feminine, and young faces were shown to benefit from mask sizes smaller than that recommended by the CDC. Besides mask size, side-edge tuck-in, or pleating, of the masks as a design parameter was also studied and found to have the potential to cause a larger localized gap opening.
Collapse
Affiliation(s)
- Tomas Solano
- Department of Mechanical Engineering, Joint College of Engineering Florida State University-Florida A&M University, Tallahassee, Florida, United States of America
| | - Rajat Mittal
- Department of Mechanical Engineering, Johns Hopkins University, Baltimore, MD, United States of America
- School of Medicine, Johns Hopkins University, Baltimore, MD, United States of America
| | - Kourosh Shoele
- Department of Mechanical Engineering, Joint College of Engineering Florida State University-Florida A&M University, Tallahassee, Florida, United States of America
| |
Collapse
|
2
|
Xu J, Du X, Xin B, Kan C, Xiao Y, Chen Z, Zhou M, Yan Q. Moisture-Wicking and Solar-Heated Coaxial Fibers with a Bark-like Appearance for Fabric Comfort Management. ACS Appl Mater Interfaces 2021; 13:26590-26600. [PMID: 34047185 DOI: 10.1021/acsami.1c03837] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Maintaining the human body's comfort is a predominant requirement of functional textiles, but there are still considerable drawbacks to design an intelligent textile with proper moisture absorption and evaporation properties. Herein, we develop moisture-wicking and solar-heated coaxial fibers with a bark-like appearance for fabric comfort management. The cortex layer of coaxial fibers can absorb moisture via the synergistic effect of the hierarchical roughness and the hydrophilic polymeric matrix. The core layer containing zirconium carbide nanoparticles can assimilate energy from the body and sunlight, which raises the surface temperature of the material and accelerates moisture evaporation. The resulting coaxial fiber-based membrane exhibits an excellent droplet diffusion radius of 2.73 cm, an excellent wicking height of 6.97 cm, and a high surface temperature of 61.7 °C which is radiated by simulated sunlight. Moreover, the designed fabric also exhibits a significant UV protection factor of 2000. Overall, the successful synthesis of such fascinating fibrous membranes enables the rapid removal of sweat from the human body textile, providing a suitable and comfortable microenvironment for the human body.
Collapse
Affiliation(s)
- Jinhao Xu
- School of Textiles and Fashion, Shanghai University of Engineering Science, Shanghai 201620, China
- Laboratory of Polymer Physics and Chemistry, Institute of Chemistry Chinese Academy of Sciences, Beijing 100190, China
| | - Xuanxuan Du
- School of Textiles and Fashion, Shanghai University of Engineering Science, Shanghai 201620, China
- College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, China
| | - Binjie Xin
- School of Textiles and Fashion, Shanghai University of Engineering Science, Shanghai 201620, China
| | - Chiwai Kan
- Institute of Textiles and Clothing, The Hongkong Polytechnic University, Hongkong 999077, China
| | - Yaqian Xiao
- School of Textiles and Fashion, Shanghai University of Engineering Science, Shanghai 201620, China
- Institute of Textiles and Clothing, The Hongkong Polytechnic University, Hongkong 999077, China
| | - Zhuoming Chen
- School of Textiles and Fashion, Shanghai University of Engineering Science, Shanghai 201620, China
| | - Mengjuan Zhou
- College of Textiles, Donghua University, Shanghai 201620, China
| | - Qingshuai Yan
- School of Textiles and Fashion, Shanghai University of Engineering Science, Shanghai 201620, China
| |
Collapse
|
3
|
Karim N, Afroj S, Lloyd K, Oaten LC, Andreeva DV, Carr C, Farmery AD, Kim ID, Novoselov KS. Sustainable Personal Protective Clothing for Healthcare Applications: A Review. ACS Nano 2020; 14:12313-12340. [PMID: 32866368 PMCID: PMC7518242 DOI: 10.1021/acsnano.0c05537] [Citation(s) in RCA: 123] [Impact Index Per Article: 30.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/04/2020] [Accepted: 08/31/2020] [Indexed: 05/19/2023]
Abstract
Personal protective equipment (PPE) is critical to protect healthcare workers (HCWs) from highly infectious diseases such as COVID-19. However, hospitals have been at risk of running out of the safe and effective PPE including personal protective clothing needed to treat patients with COVID-19, due to unprecedented global demand. In addition, there are only limited manufacturing facilities of such clothing available worldwide, due to a lack of available knowledge about relevant technologies, ineffective supply chains, and stringent regulatory requirements. Therefore, there remains a clear unmet need for coordinating the actions and efforts from scientists, engineers, manufacturers, suppliers, and regulatory bodies to develop and produce safe and effective protective clothing using the technologies that are locally available around the world. In this review, we discuss currently used PPE, their quality, and the associated regulatory standards. We survey the current state-of-the-art antimicrobial functional finishes on fabrics to protect the wearer against viruses and bacteria and provide an overview of protective medical fabric manufacturing techniques, their supply chains, and the environmental impacts of current single-use synthetic fiber-based protective clothing. Finally, we discuss future research directions, which include increasing efficiency, safety, and availability of personal protective clothing worldwide without conferring environmental problems.
Collapse
Affiliation(s)
- Nazmul Karim
- Centre
for Fine Print Research, The University
of West of England, Bower Ashton, Bristol BS3 2JT, United
Kingdom
| | - Shaila Afroj
- Centre
for Fine Print Research, The University
of West of England, Bower Ashton, Bristol BS3 2JT, United
Kingdom
| | - Kate Lloyd
- Textiles
Intelligence, Village Way, Wilmslow, Cheshire SK9 2GH, United
Kingdom
| | - Laura Clarke Oaten
- Centre
for Fine Print Research, The University
of West of England, Bower Ashton, Bristol BS3 2JT, United
Kingdom
| | - Daria V. Andreeva
- Department
of Materials Science and Engineering, National
University of Singapore, 9 Engineering Drive 1, Singapore 117575
| | - Chris Carr
- Clothworkers’
Centre for Textile Materials Innovation for Healthcare, School of
Design, University of Leeds, Leeds LS2 9JT, United Kingdom
| | - Andrew D. Farmery
- Nuffield
Department of Clinical Neurosciences, The
University of Oxford, Oxford OX1 3PN, United Kingdom
| | - Il-Doo Kim
- Department
of Materials Science and Engineering, Korea
Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro,
Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Kostya S. Novoselov
- Department
of Materials Science and Engineering, National
University of Singapore, 9 Engineering Drive 1, Singapore 117575
- Chongqing
2D Materials Institute, Liangjiang New
Area, Chongqing, 400714, China
| |
Collapse
|
4
|
Campos RK, Jin J, Rafael GH, Zhao M, Liao L, Simmons G, Chu S, Weaver SC, Chiu W, Cui Y. Decontamination of SARS-CoV-2 and Other RNA Viruses from N95 Level Meltblown Polypropylene Fabric Using Heat under Different Humidities. ACS Nano 2020; 14:14017-14025. [PMID: 32955847 PMCID: PMC7526332 DOI: 10.1021/acsnano.0c06565] [Citation(s) in RCA: 28] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/05/2020] [Accepted: 09/21/2020] [Indexed: 05/09/2023]
Abstract
In March of 2020, the World Health Organization declared a pandemic of coronavirus disease 2019 (COVID-19), caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The pandemic led to a shortage of N95-grade filtering facepiece respirators (FFRs), especially surgical-grade N95 FFRs for protection of healthcare professionals against airborne transmission of SARS-CoV-2. We and others have previously reported promising decontamination methods that may be applied to the recycling and reuse of FFRs. In this study we tested disinfection of three viruses, including SARS-CoV-2, dried on a piece of meltblown fabric, the principal component responsible for filtering of fine particles in N95-level FFRs, under a range of temperatures (60-95 °C) at ambient or 100% relative humidity (RH) in conjunction with filtration efficiency testing. We found that heat treatments of 75 °C for 30 min or 85 °C for 20 min at 100% RH resulted in efficient decontamination from the fabric of SARS-CoV-2, human coronavirus NL63 (HCoV-NL63), and another enveloped RNA virus, chikungunya virus vaccine strain 181/25 (CHIKV-181/25), without lowering the meltblown fabric's filtration efficiency.
Collapse
Affiliation(s)
- Rafael K. Campos
- Department of Microbiology and
Immunology, University of Texas Medical
Branch, Galveston, Texas 77550, United
States
| | - Jing Jin
- Vitalant Research
Institute, San Francisco, California 94118,
United States
- Division of CryoEM and Bioimaging, SSRL,
SLAC National Accelerator Laboratory,
Menlo Park, California 94025, United States
| | - Grace H. Rafael
- Department of Microbiology and
Immunology, University of Texas Medical
Branch, Galveston, Texas 77550, United
States
| | - Mervin Zhao
- 4C Air,
Inc., Sunnyvale, California 94089, United
States
| | - Lei Liao
- 4C Air,
Inc., Sunnyvale, California 94089, United
States
| | - Graham Simmons
- Vitalant Research
Institute, San Francisco, California 94118,
United States
| | - Steven Chu
- Department of Physics,
Stanford University, Stanford,
California 94305, United States
- Department of Molecular
and Cellular Physiology, Stanford, California
94305, United States
| | - Scott C. Weaver
- Department of Microbiology and
Immunology, University of Texas Medical
Branch, Galveston, Texas 77550, United
States
- Institute for Human Infections and
Immunity, University of Texas Medical
Branch, Galveston, Texas 77550, United
States
| | - Wah Chiu
- Division of CryoEM and Bioimaging, SSRL,
SLAC National Accelerator Laboratory,
Menlo Park, California 94025, United States
- Department of Bioengineering,
Stanford University, Stanford,
California 94305, United States
| | - Yi Cui
- Department of Materials Science and
Engineering, Stanford University, Stanford,
California 94305, United States
- Stanford Institute for Materials and
Energy Sciences, SLAC National Accelerator
Laboratory, Menlo Park, California 94025,
United States
| |
Collapse
|
5
|
He W, Guo Y, Gao H, Liu J, Yue Y, Wang J. Evaluation of Regeneration Processes for Filtering Facepiece Respirators in Terms of the Bacteria Inactivation Efficiency and Influences on Filtration Performance. ACS Nano 2020; 14:13161-13171. [PMID: 32975412 DOI: 10.1021/acsnano.0c04782] [Citation(s) in RCA: 33] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/20/2023]
Abstract
The regeneration of filtering facepiece respirators (FFRs) is of critical importance because of the severe shortage of FFRs during large-scale outbreaks of respiratory epidemics, such as COVID-19. Comprehensive experiments regarding FFR regeneration were performed in this study with model bacteria to illustrate the decontamination performance of the regeneration processes. The results showed that it is dangerous to use a contaminated FFR without any microbe inactivation treatment because the bacteria can live for more than 8 h. The filtration efficiency and surface electrostatic potential of 75% ethanol-treated FFRs were significantly reduced, and a most penetrating particle size of 200 nm was observed. Steam and microwave irradiation (MWI) showed promising decontamination performances, achieving 100% inactivation in 90 and 30 min, respectively. The filtration efficiencies of steam-treated FFRs for 50 and 100 nm particles decreased from 98.86% and 99.51% to 97.58% and 98.79%, respectively. Ultraviolet irradiation (UVI) effectively inactivated the surface bacteria with a short treatment of 5 min and did not affect the filtration performance. However, the UV dose reaching different layers of the FFP2 mask sample gradually decreased from the outermost layer to the innermost layer, while the model bacteria on the second and third layers could not be killed completely. UVI+MWI and steam were recommended to effectively decontaminate the used respirators and still maintain the respirators' filtration efficiency. The present work provides a comprehensive evaluation for FFR regeneration in terms of the filtration efficiencies for 50-500 nm particles, the electrostatic properties, mechanical properties, and decontamination effects.
Collapse
Affiliation(s)
- Weidong He
- Filter Test Center, Northeastern University, Shenyang, Liaoning CN-110819, China
- Institute of Environmental Engineering, ETH Zürich, Zürich, CH-8093, Switzerland
- Lab of Advanced Analytical Technologies, Empa, Dübendorf, CH-8600, Switzerland
| | - Yinghe Guo
- Filter Test Center, Northeastern University, Shenyang, Liaoning CN-110819, China
- Institute of Environmental Engineering, ETH Zürich, Zürich, CH-8093, Switzerland
- Lab of Advanced Analytical Technologies, Empa, Dübendorf, CH-8600, Switzerland
| | - Hanchao Gao
- Institute of Environmental Engineering, ETH Zürich, Zürich, CH-8093, Switzerland
- Lab of Advanced Analytical Technologies, Empa, Dübendorf, CH-8600, Switzerland
| | - Jingxian Liu
- Filter Test Center, Northeastern University, Shenyang, Liaoning CN-110819, China
| | - Yang Yue
- Institute of Environmental Engineering, ETH Zürich, Zürich, CH-8093, Switzerland
- Lab of Advanced Analytical Technologies, Empa, Dübendorf, CH-8600, Switzerland
| | - Jing Wang
- Institute of Environmental Engineering, ETH Zürich, Zürich, CH-8093, Switzerland
- Lab of Advanced Analytical Technologies, Empa, Dübendorf, CH-8600, Switzerland
| |
Collapse
|
6
|
Wang D, You Y, Zhou X, Zong Z, Huang H, Zhang H, Yong X, Cheng Y, Yang L, Guo Q, Long Y, Liu Y, Huang J, Du L. Selection of homemade mask materials for preventing transmission of COVID-19: A laboratory study. PLoS One 2020; 15:e0240285. [PMID: 33057355 PMCID: PMC7561133 DOI: 10.1371/journal.pone.0240285] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/28/2020] [Accepted: 09/24/2020] [Indexed: 02/05/2023] Open
Abstract
The Coronavirus Disease 2019 (COVID-19) has swept the whole world with high mortality. Since droplet transmission is the main route of transmission, wearing a mask serves as a crucial preventive measure. However, the virus has spread quite quickly, causing severe mask shortage. Finding alternative materials for homemade masks while ensuring the significant performance indicators will help alleviate the shortage of masks. Referring to the national standard for the "Surgical Mask" of China, 17 materials to be selected for homemade masks were tested in four key indicators: pressure difference, particle filtration efficiency, bacterial filtration efficiency and resistance to surface wetting. Eleven single-layer materials met the standard of pressure difference (≤49 Pa), of which 3 met the standard of resistance to surface wetting (≥3), 1 met the standard of particle filtration efficiency (≥30%), but none met the standard of bacterial filtration efficiency (≥95%). Based on the testing results of single-layer materials, fifteen combinations of paired materials were tested. The results showed that three double-layer materials including double-layer medical non-woven fabric, medical non-woven fabric plus non-woven shopping bag, and medical non-woven fabric plus granular tea towel could meet all the standards of pressure difference, particle filtration efficiency, and resistance to surface wetting, and were close to the standard of the bacterial filtration efficiency. In conclusion, if resources are severely lacking and medical masks cannot be obtained, homemade masks using available materials, based on the results of this study, can minimize the chance of infection to the maximum extent.
Collapse
Affiliation(s)
- Dijia Wang
- Department of Equipment, West China Hospital, Sichuan University, Chengdu, China
| | - Yanjun You
- Sichuan Testing Center of Medical Devices, Chengdu, China
| | - Xiaoli Zhou
- Department of Nursing, West China Hospital, Sichuan University, Chengdu, China
| | - Zhiyong Zong
- Department of Infection Management, West China Hospital, Sichuan University, Chengdu, China
| | - Hao Huang
- Department of Nursing, West China Hospital, Sichuan University, Chengdu, China
| | - Hui Zhang
- Department of Infection Management, West China Hospital, Sichuan University, Chengdu, China
| | - Xin Yong
- Department of Equipment, West China Hospital, Sichuan University, Chengdu, China
| | - Yifan Cheng
- Chinese Evidence-Based Medicine Center, West China Hospital, Sichuan University, Chengdu, China
| | - Liu Yang
- Chinese Evidence-Based Medicine Center, West China Hospital, Sichuan University, Chengdu, China
| | - Qiong Guo
- Chinese Evidence-Based Medicine Center, West China Hospital, Sichuan University, Chengdu, China
| | - Youlin Long
- Chinese Evidence-Based Medicine Center, West China Hospital, Sichuan University, Chengdu, China
| | - Yan Liu
- Emergency Department of West China Hospital, Institute of Disaster Medicine, Department of Emergency and Trauma Nursing, West China Nursing School, Sichuan University, Chengdu, China
| | - Jin Huang
- West China Hospital, Sichuan University, Chengdu, China
| | - Liang Du
- Center for Medical Device Supervision and Evaluation, Chinese Evidence-Based Medicine Center, West China Hospital, Sichuan University, Chengdu, China
| |
Collapse
|
7
|
Walawalkar S, Joshi M, Khattry N, Sapra BK, Khan A, Pujari PK, Mohan L, Srivastava SP, Naresh C, Badwe R, Gupta S. Particle removal from air by face masks made from Sterilization Wraps: Effectiveness and Reusability. PLoS One 2020; 15:e0240398. [PMID: 33052962 PMCID: PMC7556527 DOI: 10.1371/journal.pone.0240398] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/14/2020] [Accepted: 09/26/2020] [Indexed: 12/03/2022] Open
Abstract
Wearing face masks is highly recommended to prevent SARS-CoV-2 transmission in health care workers and for the general public. The demand for high quality face masks has seen an upsurge in the recent times, leading to exploration of alternative economic and easily available options, without compromising on the quality. Particle removal from air in terms of capture efficiency of the filter media or the face mask is a crucial parameter for testing and quality assurance. Short-term reusability of the face masks is also an important aspect as the demand for masks will potentially outstrip the supply in future. Sterilization Wraps, which are used to wrap sterile surgical instruments, have shown a promising performance in terms of removal of particles from air. In this study, we evaluate the particle filtration characteristics of face masks made of 2 different metric weights [45 and 60 gram per square metre (GSM)] respectively, using locally available Sterilization Wraps. The aerosol filtration characteristics were also studied after sterilisation by different techniques such as heat with 50% humidity (thermal treatment), ethylene oxide (ETO), steam and radiation dose of 30kGy. We found that 60 GSM face mask had particle capture efficiency of 94% for total particles greater than 0.3 microns and this capture efficiency was maintained even after sterilisation with ETO and thermal treatment. The cost of producing these masks was 30 US cents/mask at our institute. Our study suggests that sterilization wrap material made of non-woven polypropylene spunbond-meltblown-spunbond (SMS) fibres could be an appropriate readily available inexpensive material for making face masks or N95 respirators.
Collapse
Affiliation(s)
- Sachin Walawalkar
- Advanced Centre for Treatment, Research and Education in Cancer (ACTREC), Tata Memorial Centre, Navi- Mumbai, India
| | - Manish Joshi
- Radiological Physics and Advisory Division, Bhabha Atomic Research Centre (BARC), Mumbai, India
| | - Navin Khattry
- Advanced Centre for Treatment, Research and Education in Cancer (ACTREC), Tata Memorial Centre, Navi- Mumbai, India
- Homi Bhabha National Institute, Mumbai, India
| | - Balvinder Kaur Sapra
- Radiological Physics and Advisory Division, Bhabha Atomic Research Centre (BARC), Mumbai, India
- Homi Bhabha National Institute, Mumbai, India
| | - Arshad Khan
- Radiological Physics and Advisory Division, Bhabha Atomic Research Centre (BARC), Mumbai, India
| | - Pradeep Kumar Pujari
- Homi Bhabha National Institute, Mumbai, India
- Radiation Chemistry and Isotope Group, Bhabha Atomic Research Centre (BARC), Mumbai, India
| | - Lalit Mohan
- Homi Bhabha National Institute, Mumbai, India
- Centre for Design and Manufacture (CDM), Bhabha Atomic Research Centre (BARC), Mumbai, India
| | - Sushil Prasad Srivastava
- Homi Bhabha National Institute, Mumbai, India
- Centre for Design and Manufacture (CDM), Bhabha Atomic Research Centre (BARC), Mumbai, India
| | - Chital Naresh
- Advanced Centre for Treatment, Research and Education in Cancer (ACTREC), Tata Memorial Centre, Navi- Mumbai, India
| | - Rajendra Badwe
- Advanced Centre for Treatment, Research and Education in Cancer (ACTREC), Tata Memorial Centre, Navi- Mumbai, India
- Homi Bhabha National Institute, Mumbai, India
| | - Sudeep Gupta
- Advanced Centre for Treatment, Research and Education in Cancer (ACTREC), Tata Memorial Centre, Navi- Mumbai, India
- Homi Bhabha National Institute, Mumbai, India
| |
Collapse
|
8
|
Clase CM, Fu EL, Ashur A, Beale RCL, Clase IA, Dolovich MB, Jardine MJ, Joseph M, Kansiime G, Mann JFE, Pecoits-Filho R, Winkelmayer WC, Carrero JJ. Forgotten Technology in the COVID-19 Pandemic: Filtration Properties of Cloth and Cloth Masks-A Narrative Review. Mayo Clin Proc 2020; 95:2204-2224. [PMID: 33012350 PMCID: PMC7834536 DOI: 10.1016/j.mayocp.2020.07.020] [Citation(s) in RCA: 33] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 07/19/2020] [Accepted: 07/23/2020] [Indexed: 12/20/2022]
Abstract
Management of the global crisis of the coronavirus disease 2019 pandemic requires detailed appraisal of evidence to support clear, actionable, and consistent public health messaging. The use of cloth masks for general public use is being debated, and is in flux. We searched the MEDLINE and EMBASE databases and Google for articles reporting the filtration properties of flat cloth or cloth masks. We reviewed the reference lists of relevant articles to identify further articles and identified articles through social and conventional news media. We found 25 articles. Study of protection for the wearer used healthy volunteers, or used a manikin wearing a mask, with airflow to simulate different breathing rates. Studies of protection of the environment, also known as source control, used convenience samples of healthy volunteers. The design and execution of the studies was generally rigorously described. Many descriptions of cloth lacked the detail required for reproducibility; no study provided all the expected details of material, thread count, weave, and weight. Some of the homemade mask designs were reproducible. Successful masks were made of muslin at 100 threads per inch (TPI) in 3 to 4 layers (4-layer muslin or a muslin-flannel-muslin sandwich), tea towels (also known as dish towels), made using 1 layer (2 layers would be expected to be better), and good-quality cotton T-shirts in 2 layers (with a stitched edge to prevent stretching). In flat-cloth experiments, linen tea towels, 600-TPI cotton in 2 layers, and 600-TPI cotton with 90-TPI flannel performed well but 80-TPI cotton in 2 layers did not. We therefore recommend cotton or flannel at least 100 TPI, at least 2 layers. More layers, 3 or 4, will provide increased filtration but there is a trade-off in that more layers increases the resistance to breathing. Although this is not a systematic review, we included all the articles that we identified in an unbiased way. We did not include gray literature or preprints. A plain language summary of these data and recommendations, as well as information on making, wearing and cleaning cloth masks is available at www.clothmasks.ca.
Collapse
Affiliation(s)
- Catherine M Clase
- Division of Nephrology, Department of Medicine, McMaster University, Hamilton, Ontario, Canada; Department of Health Research Methods, Evidence, and Impact, McMaster University, Hamilton, Ontario, Canada; St Joseph's Healthcare Hamilton, Hamilton, Canada; Centre of Excellence in Protective Equipment and Materials.
| | - Edouard L Fu
- Department of Clinical Epidemiology, Leiden University Medical Center, Leiden, The Netherlands
| | - Aurneen Ashur
- Division of Nephrology, Department of Medicine, McMaster University, Hamilton, Ontario, Canada
| | | | - Imogen A Clase
- Division of Nephrology, Department of Medicine, McMaster University, Hamilton, Ontario, Canada
| | - Myrna B Dolovich
- Division of Respirology, Department of Medicine, McMaster University, Hamilton, Ontario, Canada
| | - Meg J Jardine
- The George Institute for Global Health and Concord Repatriation General Hospital, Sydney, Australia
| | - Meera Joseph
- Division of Nephrology, Department of Medicine, McMaster University, Hamilton, Ontario, Canada; Mulago National Referral Hospital, Kampala, Uganda
| | - Grace Kansiime
- Division of Nephrology, Department of Medicine, McMaster University, Hamilton, Ontario, Canada
| | - Johannes F E Mann
- Department of Nephrology, Hypertension & Rheumatology at Munich General Hospitals, University of Erlangen-Nürnberg, KfH Kidney Center, Munich-Schwabing, Germany
| | - Roberto Pecoits-Filho
- DOPPS Program, Arbor Research Collaborative for Health, Ann Arbor, MI, and School of Medicine, Pontifical Catholic University of Paraná, Curitiba, Brazil
| | | | - Juan J Carrero
- Department of Medical Epidemiology and Biostatistics, Karolinska Institutet, Stockholm, Sweden
| |
Collapse
|
9
|
Teesing GR, van Straten B, de Man P, Horeman-Franse T. Is there an adequate alternative to commercially manufactured face masks? A comparison of various materials and forms. J Hosp Infect 2020; 106:246-253. [PMID: 32763333 PMCID: PMC7403160 DOI: 10.1016/j.jhin.2020.07.024] [Citation(s) in RCA: 36] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/21/2020] [Accepted: 07/22/2020] [Indexed: 12/22/2022]
Abstract
BACKGROUND There is a worldwide shortage of medical-grade face masks. Donning masks can play an important role in curbing the spread of SARS-CoV-2. AIM To conclude whether there is an effective mask for the population to wear in public that could easily be made during a medical face mask shortage using readily available materials. METHODS We determined the effectiveness of readily available materials and models for making a face mask. The outcomes were compared with N95/FFP2/KN95 masks that entered the Netherlands in April-May 2020. Masks were tested to determine whether they filtered a minimum of 35% of 0.3-μm particles, are hydrophobic, seal on the face, are breathable, and can be washed. FINDINGS Fourteen of the 25 (combinations of) materials filtered at least 35% of 0.3-μm particles. Four of the materials proved hydrophobic, all commercially manufactured filters. Two models sealed the face. Twenty-two of the 25 materials were breathable at <0.7 mbar. None of the hydrophobic materials stayed intact after washing. CONCLUSIONS It would be possible to reduce the reproduction rate of SARS-CoV-2 from 2.4 to below one if 39% of the population would wear a mask made from ePM₁ 85% commercially manufactured filter fabric and in a duckbill form. This mask performs better than 80% of the imported N95/FFP2/KN95 masks and provides a better fit than a surgical mask. Two layers of quilt fabric with a household paper towel as filter is also a viable choice for protecting the user and the environment.
Collapse
Affiliation(s)
- G R Teesing
- Department of Public Health, Erasmus MC, University Medical Center Rotterdam, Rotterdam, the Netherlands; The Municipal Public Health Service Rotterdam-Rijnmond, Rotterdam, the Netherlands.
| | - B van Straten
- Delft University of Technology, Department of BioMechanical Engineering, Delft, the Netherlands; Van Straten Medical, De Meern, the Netherlands
| | - P de Man
- Department of Medical Microbiology and Infection Control, Franciscus Gasthuis en Vlietland, Rotterdam, the Netherlands
| | - T Horeman-Franse
- Delft University of Technology, Department of BioMechanical Engineering, Delft, the Netherlands
| |
Collapse
|
10
|
Parlin AF, Stratton SM, Culley TM, Guerra PA. A laboratory-based study examining the properties of silk fabric to evaluate its potential as a protective barrier for personal protective equipment and as a functional material for face coverings during the COVID-19 pandemic. PLoS One 2020; 15:e0239531. [PMID: 32946526 PMCID: PMC7500605 DOI: 10.1371/journal.pone.0239531] [Citation(s) in RCA: 21] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/15/2020] [Accepted: 09/08/2020] [Indexed: 12/23/2022] Open
Abstract
The worldwide shortage of single-use N95 respirators and surgical masks due to the COVID-19 pandemic has forced many health care personnel to use their existing equipment for as long as possible. In many cases, workers cover respirators with available masks in an attempt to extend their effectiveness against the virus. Due to low mask supplies, many people instead are using face coverings improvised from common fabrics. Our goal was to determine what fabrics would be most effective in both practices. Under laboratory conditions, we examined the hydrophobicity of fabrics (cotton, polyester, silk), as measured by their resistance to the penetration of small and aerosolized water droplets, an important transmission avenue for the virus causing COVID-19. We also examined the breathability of these fabrics and their ability to maintain hydrophobicity despite undergoing repeated cleaning. Laboratory-based tests were conducted when fabrics were fashioned as an overlaying barrier for respirators and when constructed as face coverings. When used as material in these two situations, silk was more effective at impeding the penetration and absorption of droplets due to its greater hydrophobicity relative to other tested fabrics. We found that silk face coverings repelled droplets in spray tests as well as disposable single-use surgical masks, and silk face coverings have the added advantage over masks such that they can be sterilized for immediate reuse. We show that silk is a hydrophobic barrier to droplets, can be more breathable than other fabrics that trap humidity, and are re-useable via cleaning. We suggest that silk can serve as an effective material for making hydrophobic barriers that protect respirators, and silk can now be tested under clinical conditions to verify its efficacy for this function. Although respirators are still the most appropriate form of protection, silk face coverings possess properties that make them capable of repelling droplets.
Collapse
Affiliation(s)
- Adam F. Parlin
- Department of Biological Sciences, University of Cincinnati, Cincinnati, Ohio, United States of America
| | - Samuel M. Stratton
- Department of Biological Sciences, University of Cincinnati, Cincinnati, Ohio, United States of America
| | - Theresa M. Culley
- Department of Biological Sciences, University of Cincinnati, Cincinnati, Ohio, United States of America
| | - Patrick A. Guerra
- Department of Biological Sciences, University of Cincinnati, Cincinnati, Ohio, United States of America
- * E-mail:
| |
Collapse
|
11
|
Santarsiero A, Ciambelli P, Donsì G, Quadrini F, Briancesco R, D'Alessandro D, Fara GM. Face masks. Technical, technological and functional characteristics and hygienic-sanitary aspects related to the use of filtering mask in the community. Ann Ig 2020; 32:472-520. [PMID: 32744582 DOI: 10.7416/ai.2020.2371] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
Abstract
INTRODUCTION The health emergency caused by the spread of SARS-COV-2 virus has required the adoption of passive measures against contagion, such as social distancing. The use of filtering masks, of the different types available on the market, such as surgical and facial filtering masks (FFP1, FFP2 and FFP3), is also recommended. OBJECTIVES The aim of this paper, within the Italian and European regulatory reference framework, is to suggest a rational application of existing methodologies that enable to know and assess the features and/or make a face mask intended to be used by the community. In addition to this, the study aims to provide a correct regulatory framework and useful information for a correct use and disposal of face masks. Another purpose is the assessment of the hygienic, sanitary and regulatory aspects related to the use and disposal of face masks. METHODS The analysis of filtering masks is based on the review of scientific literature, the state of art of technology and the filtering means/materials available. Reference is made to filtering mechanisms and devices, the testing methods, the technical, manufacturing and performance features, and to the Italian and European regulatory reference framework. Reference is also made to the hygienic, sanitary and regulatory aspects related to the use and disposal of face masks. RESULTS Surgical masks or, alternatively, filtering masks with a filtration efficiency between 90% and 95% for 3-µm particles, are the most practicable choice with minor contraindications. The reusable type of mask is conceptually superior compared to single-use masks, but cleaning procedures to be followed are quite complex and not always described in a clear way. CONCLUSIONS The definition of rigorous and repeatable tests on mask filtration capacity, breathability, wearability, duration of use, regeneration, as well as safe disposal methods, are the main way to provide users with correct selection and use criteria. The results must be disclosed and disseminated quickly.
Collapse
|
12
|
Zangmeister CD, Radney JG, Vicenzi EP, Weaver JL. Filtration Efficiencies of Nanoscale Aerosol by Cloth Mask Materials Used to Slow the Spread of SARS-CoV-2. ACS Nano 2020; 14:9188-9200. [PMID: 32584542 PMCID: PMC7341689 DOI: 10.1021/acsnano.0c05025] [Citation(s) in RCA: 132] [Impact Index Per Article: 33.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/16/2020] [Accepted: 06/25/2020] [Indexed: 05/17/2023]
Abstract
Filtration efficiency (FE), differential pressure (ΔP), quality factor (QF), and construction parameters were measured for 32 cloth materials (14 cotton, 1 wool, 9 synthetic, 4 synthetic blends, and 4 synthetic/cotton blends) used in cloth masks intended for protection from the SARS-CoV-2 virus (diameter 100 ± 10 nm). Seven polypropylene-based fiber filter materials were also measured including surgical masks and N95 respirators. Additional measurements were performed on both multilayered and mixed-material samples of natural, synthetic, or natural-synthetic blends to mimic cloth mask construction methods. Materials were microimaged and tested against size selected NaCl aerosol with particle mobility diameters between 50 and 825 nm. Three of the top five best performing samples were woven 100% cotton with high to moderate yarn counts, and the other two were woven synthetics of moderate yarn counts. In contrast to recently published studies, samples utilizing mixed materials did not exhibit a significant difference in the measured FE when compared to the product of the individual FE for the components. The FE and ΔP increased monotonically with the number of cloth layers for a lightweight flannel, suggesting that multilayered cloth masks may offer increased protection from nanometer-sized aerosol with a maximum FE dictated by breathability (i.e., ΔP).
Collapse
Affiliation(s)
- Christopher D. Zangmeister
- Material Measurement Laboratory, National
Institute of Standards and Technology, Gaithersburg, Maryland 20899,
United States
| | - James G. Radney
- Material Measurement Laboratory, National
Institute of Standards and Technology, Gaithersburg, Maryland 20899,
United States
| | - Edward P. Vicenzi
- Material Measurement Laboratory, National
Institute of Standards and Technology, Gaithersburg, Maryland 20899,
United States
- Museum Conservation Institute,
Smithsonian Institution, Suitland, Maryland 20746,
United States
| | - Jamie L. Weaver
- Material Measurement Laboratory, National
Institute of Standards and Technology, Gaithersburg, Maryland 20899,
United States
- Museum Conservation Institute,
Smithsonian Institution, Suitland, Maryland 20746,
United States
| |
Collapse
|
13
|
D'Anna A, Di Natale F, De Falco G, Di Maio E, Tammaro D, Quaglia F, Ungaro F, Cassiano C, Salvatore P, Colicchio R, Scaglione E, Pagliuca C, Fontana L, Iavicoli I. [Validation of surgical masks during COVID19 emergency: activities at the University of Napoli Federico II]. G Ital Med Lav Ergon 2020; 42:73-81. [PMID: 32614536] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Subscribe] [Scholar Register] [Received: 03/31/2020] [Accepted: 06/30/2020] [Indexed: 06/11/2023]
Abstract
During COVID-19 pandemic crisis, Italian Government has approved Law Decree no. 18 of 17 march 2020, in which art. 15 allows enterprises to produce, import and commercialize surgical masks notwithstanding the current rules of product certification. It is just required that the interested enterprises send to the Italian National Institute of Health a selfcertification in which they declare the technical characteristics of the masks and that masks are produced according to the safety requirements. In this context, a technical-scientific unit was established at the University of Napoli Federico II to provide interested enterprises with state-of-the-art consultancy, testing and measurement services, adhering to rigorous scientific protocols. Characterization tests were carried out on 163 surgical masks and/or materials for their construction and they have enabled the identification of pre-screening criteria to simplify the procedure for evaluating surgical masks using methods for assessing the filtration efficiency of particles and aerosols. Based on experimental results, it has been observed that a filtration efficiency for particles with sizes larger that 650 nm (PFE>650) exceeding 35% might guarantees a bacterial filtration efficiency (BFE) higher than 95% while BFE values higher than 98% are obtained when the PFE>650 is larger than 40%. PFE measurement is extremely simpler with respect to BFE, the latter being time-consuming and requiring specific equipment and methods for its realization. Many tested materials have shown the capability to assure high filtration efficiencies but Spundonded-Meltblown-Spunbonded (SMS), that are layers of non-woven fabric with different weights of Meltblown, can simultaneously guarantee high particle filtration efficiencies with pressure drop values (breathability) in the limits to classify the surgical masks as Type II/IIR. In fact, the fabric products analyzed so far have not been able to simultaneously guarantee adequate BFE and breathability values. On the contrary, Spunbonds of adequate weights can virtually verify both requirements and accredit themselves as possible materials for the production of surgical masks, at least of Type I. Further studies are needed to verify the possibility of producing low-cost, reusable surgical masks that could meet the criteria of circular economy.
Collapse
Affiliation(s)
- Andrea D'Anna
- CeSMA Centro Servizi Metrologici e Tecnologici Avanzati, Università degli Studi di Napoli Federico II, Corso Nicolangelo Protopisani, 80146 Napoli, Italy
- Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli Federico II, Piazzale Tecchio, 80, 80125 Napoli, Italy
| | - Francesco Di Natale
- CeSMA Centro Servizi Metrologici e Tecnologici Avanzati, Università degli Studi di Napoli Federico II, Corso Nicolangelo Protopisani, 80146 Napoli, Italy
- Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli Federico II, Piazzale Tecchio, 80, 80125 Napoli, Italy
| | - Gianluigi De Falco
- CeSMA Centro Servizi Metrologici e Tecnologici Avanzati, Università degli Studi di Napoli Federico II, Corso Nicolangelo Protopisani, 80146 Napoli, Italy
- Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli Federico II, Piazzale Tecchio, 80, 80125 Napoli, Italy
| | - Ernesto Di Maio
- CeSMA Centro Servizi Metrologici e Tecnologici Avanzati, Università degli Studi di Napoli Federico II, Corso Nicolangelo Protopisani, 80146 Napoli, Italy
- Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli Federico II, Piazzale Tecchio, 80, 80125 Napoli, Italy
| | - Daniele Tammaro
- CeSMA Centro Servizi Metrologici e Tecnologici Avanzati, Università degli Studi di Napoli Federico II, Corso Nicolangelo Protopisani, 80146 Napoli, Italy
- Dipartimento di Ingegneria Chimica, dei Materiali e della Produzione Industriale, Università degli Studi di Napoli Federico II, Piazzale Tecchio, 80, 80125 Napoli, Italy
| | - Fabiana Quaglia
- CeSMA Centro Servizi Metrologici e Tecnologici Avanzati, Università degli Studi di Napoli Federico II, Corso Nicolangelo Protopisani, 80146 Napoli, Italy
- Dipartimento di Farmacia, Università degli Studi di Napoli Federico II, Via D. Montesano 49, 80131 Napoli, Italy
| | - Francesca Ungaro
- CeSMA Centro Servizi Metrologici e Tecnologici Avanzati, Università degli Studi di Napoli Federico II, Corso Nicolangelo Protopisani, 80146 Napoli, Italy
- Dipartimento di Farmacia, Università degli Studi di Napoli Federico II, Via D. Montesano 49, 80131 Napoli, Italy
| | - Chiara Cassiano
- CeSMA Centro Servizi Metrologici e Tecnologici Avanzati, Università degli Studi di Napoli Federico II, Corso Nicolangelo Protopisani, 80146 Napoli, Italy
- Dipartimento di Farmacia, Università degli Studi di Napoli Federico II, Via D. Montesano 49, 80131 Napoli, Italy
| | - Paola Salvatore
- CeSMA Centro Servizi Metrologici e Tecnologici Avanzati, Università degli Studi di Napoli Federico II, Corso Nicolangelo Protopisani, 80146 Napoli, Italy
- Dipartimento di Medicina Molecolare e Biotecnologie Mediche, Università degli Studi di Napoli Federico II, CEINGE, Biotecnologie Avanzate s.c.ar.l., Via S. Pansini 5, 80131 Napoli, Italy
| | - Roberta Colicchio
- CeSMA Centro Servizi Metrologici e Tecnologici Avanzati, Università degli Studi di Napoli Federico II, Corso Nicolangelo Protopisani, 80146 Napoli, Italy
- Dipartimento di Medicina Molecolare e Biotecnologie Mediche, Università degli Studi di Napoli Federico II, CEINGE, Biotecnologie Avanzate s.c.ar.l., Via S. Pansini 5, 80131 Napoli, Italy
| | - Elena Scaglione
- CeSMA Centro Servizi Metrologici e Tecnologici Avanzati, Università degli Studi di Napoli Federico II, Corso Nicolangelo Protopisani, 80146 Napoli, Italy
- Dipartimento di Medicina Molecolare e Biotecnologie Mediche, Università degli Studi di Napoli Federico II, CEINGE, Biotecnologie Avanzate s.c.ar.l., Via S. Pansini 5, 80131 Napoli, Italy
| | - Chiara Pagliuca
- CeSMA Centro Servizi Metrologici e Tecnologici Avanzati, Università degli Studi di Napoli Federico II, Corso Nicolangelo Protopisani, 80146 Napoli, Italy
- Dipartimento di Medicina Molecolare e Biotecnologie Mediche, Università degli Studi di Napoli Federico II, CEINGE, Biotecnologie Avanzate s.c.ar.l., Via S. Pansini 5, 80131 Napoli, Italy
| | - Luca Fontana
- CeSMA Centro Servizi Metrologici e Tecnologici Avanzati, Università degli Studi di Napoli Federico II, Corso Nicolangelo Protopisani, 80146 Napoli, Italy
- Dipartimento di Sanità Pubblica, Sezione Medicina del Lavoro, Università degli Studi di Napoli Federico II, Via S. Pansini 5, 80131 Napoli, Italy
| | - Ivo Iavicoli
- CeSMA Centro Servizi Metrologici e Tecnologici Avanzati, Università degli Studi di Napoli Federico II, Corso Nicolangelo Protopisani, 80146 Napoli, Italy
- Dipartimento di Sanità Pubblica, Sezione Medicina del Lavoro, Università degli Studi di Napoli Federico II, Via S. Pansini 5, 80131 Napoli, Italy
| |
Collapse
|
14
|
Konda A, Prakash A, Moss GA, Schmoldt M, Grant GD, Guha S. Aerosol Filtration Efficiency of Common Fabrics Used in Respiratory Cloth Masks. ACS Nano 2020; 14:6339-6347. [PMID: 32329337 PMCID: PMC7185834 DOI: 10.1021/acsnano.0c03252] [Citation(s) in RCA: 476] [Impact Index Per Article: 119.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/18/2020] [Accepted: 04/21/2020] [Indexed: 05/13/2023]
Abstract
The emergence of a pandemic affecting the respiratory system can result in a significant demand for face masks. This includes the use of cloth masks by large sections of the public, as can be seen during the current global spread of COVID-19. However, there is limited knowledge available on the performance of various commonly available fabrics used in cloth masks. Importantly, there is a need to evaluate filtration efficiencies as a function of aerosol particulate sizes in the 10 nm to 10 μm range, which is particularly relevant for respiratory virus transmission. We have carried out these studies for several common fabrics including cotton, silk, chiffon, flannel, various synthetics, and their combinations. Although the filtration efficiencies for various fabrics when a single layer was used ranged from 5 to 80% and 5 to 95% for particle sizes of <300 nm and >300 nm, respectively, the efficiencies improved when multiple layers were used and when using a specific combination of different fabrics. Filtration efficiencies of the hybrids (such as cotton-silk, cotton-chiffon, cotton-flannel) was >80% (for particles <300 nm) and >90% (for particles >300 nm). We speculate that the enhanced performance of the hybrids is likely due to the combined effect of mechanical and electrostatic-based filtration. Cotton, the most widely used material for cloth masks performs better at higher weave densities (i.e., thread count) and can make a significant difference in filtration efficiencies. Our studies also imply that gaps (as caused by an improper fit of the mask) can result in over a 60% decrease in the filtration efficiency, implying the need for future cloth mask design studies to take into account issues of "fit" and leakage, while allowing the exhaled air to vent efficiently. Overall, we find that combinations of various commonly available fabrics used in cloth masks can potentially provide significant protection against the transmission of aerosol particles.
Collapse
Affiliation(s)
- Abhiteja Konda
- Center for Nanoscale Materials, Argonne
National Laboratory, Lemont, Illinois 60439, United
States
| | - Abhinav Prakash
- Center for Nanoscale Materials, Argonne
National Laboratory, Lemont, Illinois 60439, United
States
- Pritzker School of Molecular Engineering,
University of Chicago, Chicago, Illinois 60637,
United States
| | - Gregory A. Moss
- Worker Safety & Health Division,
Argonne National Laboratory, Lemont, Illinois 60439,
United States
| | - Michael Schmoldt
- Center for Nanoscale Materials, Argonne
National Laboratory, Lemont, Illinois 60439, United
States
- Worker Safety & Health Division,
Argonne National Laboratory, Lemont, Illinois 60439,
United States
| | - Gregory D. Grant
- Pritzker School of Molecular Engineering,
University of Chicago, Chicago, Illinois 60637,
United States
| | - Supratik Guha
- Pritzker School of Molecular Engineering,
University of Chicago, Chicago, Illinois 60637,
United States
- Argonne National
Laboratory, Lemont, Illinois 60439, United States
| |
Collapse
|
15
|
Abstract
The coronavirus disease 2019 (COVID-19) pandemic has led to a major shortage of N95 respirators, which are essential for protecting healthcare professionals and the general public who may come into contact with the virus. Thus, it is essential to determine how we can reuse respirators and other personal protective equipment in these urgent times. We investigated multiple commonly used disinfection schemes on media with particle filtration efficiency of 95%. Heating was recently found to inactivate the virus in solution within 5 min at 70 °C and is among the most scalable, user-friendly methods for viral disinfection. We found that heat (≤85 °C) under various humidities (≤100% relative humidity, RH) was the most promising, nondestructive method for the preservation of filtration properties in meltblown fabrics as well as N95-grade respirators. At 85 °C, 30% RH, we were able to perform 50 cycles of heat treatment without significant changes in the filtration efficiency. At low humidity or dry conditions, temperatures up to 100 °C were not found to alter the filtration efficiency significantly within 20 cycles of treatment. Ultraviolet (UV) irradiation was a secondary choice, which was able to withstand 10 cycles of treatment and showed small degradation by 20 cycles. However, UV can potentially impact the material strength and subsequent sealing of respirators. Finally, treatments involving liquids and vapors require caution, as steam, alcohol, and household bleach all may lead to degradation of the filtration efficiency, leaving the user vulnerable to the viral aerosols.
Collapse
Affiliation(s)
- Lei Liao
- 4C Air, Inc., Sunnyvale, California 94089, United States
| | - Wang Xiao
- 4C Air, Inc., Sunnyvale, California 94089, United States
| | - Mervin Zhao
- 4C Air, Inc., Sunnyvale, California 94089, United States
| | - Xuanze Yu
- 4C Air, Inc., Sunnyvale, California 94089, United States
| | - Haotian Wang
- 4C Air, Inc., Sunnyvale, California 94089, United States
| | - Qiqi Wang
- 4C Air, Inc., Sunnyvale, California 94089, United States
| | - Steven Chu
- Department of Physics, Stanford University, Stanford, California 94305, United States
- Department of Molecular and Cellular Physiology, Stanford University, Stanford, California 94305, United States
| | - Yi Cui
- Department of Materials Science and Engineering, Stanford University, Stanford, California 94305, United States
- Stanford Institute for Materials and Energy Sciences, SLAC National Accelerator Laboratory, Menlo Park, California 94025, United States
| |
Collapse
|
16
|
Liao L, Xiao W, Zhao M, Yu X, Wang H, Wang Q, Chu S, Cui Y. Can N95 Respirators Be Reused after Disinfection? How Many Times? ACS Nano 2020; 14:6348-6356. [PMID: 32368894 PMCID: PMC7202248 DOI: 10.1021/acsnano.0c03597] [Citation(s) in RCA: 246] [Impact Index Per Article: 61.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/29/2020] [Accepted: 05/01/2020] [Indexed: 05/18/2023]
Abstract
The coronavirus disease 2019 (COVID-19) pandemic has led to a major shortage of N95 respirators, which are essential for protecting healthcare professionals and the general public who may come into contact with the virus. Thus, it is essential to determine how we can reuse respirators and other personal protective equipment in these urgent times. We investigated multiple commonly used disinfection schemes on media with particle filtration efficiency of 95%. Heating was recently found to inactivate the virus in solution within 5 min at 70 °C and is among the most scalable, user-friendly methods for viral disinfection. We found that heat (≤85 °C) under various humidities (≤100% relative humidity, RH) was the most promising, nondestructive method for the preservation of filtration properties in meltblown fabrics as well as N95-grade respirators. At 85 °C, 30% RH, we were able to perform 50 cycles of heat treatment without significant changes in the filtration efficiency. At low humidity or dry conditions, temperatures up to 100 °C were not found to alter the filtration efficiency significantly within 20 cycles of treatment. Ultraviolet (UV) irradiation was a secondary choice, which was able to withstand 10 cycles of treatment and showed small degradation by 20 cycles. However, UV can potentially impact the material strength and subsequent sealing of respirators. Finally, treatments involving liquids and vapors require caution, as steam, alcohol, and household bleach all may lead to degradation of the filtration efficiency, leaving the user vulnerable to the viral aerosols.
Collapse
Affiliation(s)
- Lei Liao
- 4C Air,
Inc., Sunnyvale, California 94089, United
States
| | - Wang Xiao
- 4C Air,
Inc., Sunnyvale, California 94089, United
States
| | - Mervin Zhao
- 4C Air,
Inc., Sunnyvale, California 94089, United
States
| | - Xuanze Yu
- 4C Air,
Inc., Sunnyvale, California 94089, United
States
| | - Haotian Wang
- 4C Air,
Inc., Sunnyvale, California 94089, United
States
| | - Qiqi Wang
- 4C Air,
Inc., Sunnyvale, California 94089, United
States
| | - Steven Chu
- Department of Physics,
Stanford University, Stanford,
California 94305, United States
- Department of Molecular and Cellular
Physiology, Stanford University, Stanford,
California 94305, United States
| | - Yi Cui
- Department of Materials Science and
Engineering, Stanford University, Stanford,
California 94305, United States
- Stanford Institute for Materials and
Energy Sciences, SLAC National Accelerator
Laboratory, Menlo Park, California 94025,
United States
| |
Collapse
|
17
|
Wingert L, Cloutier Y, Hallé S, Bahloul A, Tessier D, Giraudel JL, Dolez P, Tuduri L. Filtering performances of 20 protective fabrics against solid aerosols. J Occup Environ Hyg 2019; 16:592-606. [PMID: 31283417 DOI: 10.1080/15459624.2019.1628967] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Workers can be exposed to solid airborne particles in some occupational environments, and they might be required to wear chemical protective clothing to prevent skin exposure. Dedicated standards exist to certify the protective value of such clothing, but they are not informative enough to identify the main pathways of entry for solid particles nor to compare performances between different chemical protective clothing. In this work, 20 non-woven fabrics used to make chemical protective clothing for solid particle protection were selected to be examined for both filtration and comfort performances. Nine were microporous fabrics (MP), 10 were multilayered nonwoven fibrous media (SMS) and one was a flash spun material (FS). To assess their filtration performances, fabrics were challenged in a benchtop wind tunnel with a 20-3,000 nm diameter sodium chloride aerosol at three low fabric face velocities (0.05, 0.15, 0.3 cm/sec). Airflow resistance and water vapor transmission rate were also measured to provide indications of comfort for the wearer. The penetration results led to the classification of the 20 fabrics into distinct groups of filtration efficiency. The data were analysed based on the porous media characteristics (thickness, fiber diameter, porosity, etc.). MPs were the most efficient fabrics, and SMSs showed a wide range of performances, mostly due to variations in the thickness of the filtering layer as well as to the fabric treatment. Measurements of airflow resistance and water vapor transmission rates revealed major differences between MPs and FSs and SMSs. This highlights the potential of some SMS fabrics to meet a compromise between protection and comfort.
Collapse
Affiliation(s)
- Loïc Wingert
- a Institut de recherche Robert-Sauvé en Santé et en Sécurité du Travail , PRCB , Montreal , Quebec , Canada
- b École de Technologie Supérieure , Department of Mechanical Engineering , Montreal , Quebec , Canada
| | - Yves Cloutier
- a Institut de recherche Robert-Sauvé en Santé et en Sécurité du Travail , PRCB , Montreal , Quebec , Canada
| | - Stéphane Hallé
- b École de Technologie Supérieure , Department of Mechanical Engineering , Montreal , Quebec , Canada
| | - Ali Bahloul
- a Institut de recherche Robert-Sauvé en Santé et en Sécurité du Travail , PRCB , Montreal , Quebec , Canada
| | | | - Jean-Luc Giraudel
- d UMR 5805 EPOC, Équipe de recherche LPTC , Université de Bordeaux , 33405 Talence , France
| | - Patricia Dolez
- e Department of Human Ecology , University of Alberta , Edmonton , Alberta , Canada
| | - Ludovic Tuduri
- a Institut de recherche Robert-Sauvé en Santé et en Sécurité du Travail , PRCB , Montreal , Quebec , Canada
| |
Collapse
|
18
|
Jaques PA, Portnoff L. Evaluation of a passive method for determining particle penetration through protective clothing materials. J Occup Environ Hyg 2017; 14:995-1002. [PMID: 28699827 PMCID: PMC10034564 DOI: 10.1080/15459624.2017.1351614] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
The risk of workers' exposure to aerosolized particles has increased with the upsurge in the production of engineered nanomaterials. Currently, a whole-body standard test method for measuring particle penetration through protective clothing ensembles is not available. Those available for respirators neglect the most common challenges to ensembles, because they use active vacuum-based filtration, designed to simulate breathing, rather than the positive forces of wind experienced by workers. Thus, a passive method that measures wind-driven particle penetration through ensemble fabric has been developed and evaluated. The apparatus includes a multidomain magnetic passive aerosol sampler housed in a shrouded penetration cell. Performance evaluation was conducted in a recirculation aerosol wind tunnel using paramagnetic Fe3O4 (i.e., iron (II, III) oxide) particles for the challenge aerosol. The particles were collected on a PVC substrate and quantified using a computer-controlled scanning electron microscope. Particle penetration levels were determined by taking the ratio of the particle number collected on the substrate with a fabric (sample) to that without a fabric (control). Results for each fabric obtained by this passive method were compared to previous results from an automated vacuum-based active fractional efficiency tester (TSI 3160), which used sodium chloride particles as the challenge aerosol. Four nonwoven fabrics with a range of thicknesses, porosities, and air permeabilities were evaluated. Smoke tests and flow modeling showed the passive sampler shroud provided smooth (non-turbulent) air flow along the exterior of the sampler, such that disturbance of flow stream lines and distortion of the particle size distribution were reduced. Differences between the active and passive approaches were as high as 5.5-fold for the fabric with the lowest air permeability (0.00067 m/sec-Pa), suggesting the active method overestimated penetration in dense fabrics because the active method draws air at a constant flow rate regardless of the resistance of the test fabric. The passive method indicated greater sensitivity since penetration decreased in response to the increase in permeability.
Collapse
Affiliation(s)
| | - Lee Portnoff
- National Institute for Occupational Safety and Health (NIOSH), National Personal Protective Technology Laboratory, Pittsburgh, Pennsylvania
| |
Collapse
|
19
|
Hill PJ, Taylor M, Goswami P, Blackburn RS. Substitution of PFAS chemistry in outdoor apparel and the impact on repellency performance. Chemosphere 2017; 181:500-507. [PMID: 28460297 DOI: 10.1016/j.chemosphere.2017.04.122] [Citation(s) in RCA: 24] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/16/2017] [Revised: 04/24/2017] [Accepted: 04/24/2017] [Indexed: 05/06/2023]
Abstract
Intensifying legislation and increased research on the toxicological and persistent nature of per- and polyfluoroalkyl substances (PFASs) have recently influenced the direction of liquid repellent chemistry use; environmental, social, and sustainability responsibilities are at the crux. Without PFAS chemistry, it is challenging to meet current textile industry liquid repellency requirements, which is a highly desirable property, particularly in outdoor apparel where the technology helps to provide the wearer with essential protection from adverse environmental conditions. Herein, complexities between required functionality, legislation and sustainability within outdoor apparel are discussed, and fundamental technical performance of commercially available long-chain (C8) PFASs, shorter-chain (C6) PFASs, and non-fluorinated repellent chemistries finishes are evaluated comparatively. Non-fluorinated finishes provided no oil repellency, and were clearly inferior in this property to PFAS-finished fabrics that demonstrated good oil-resistance. However, water repellency ratings were similar across the range of all finished fabrics tested, all demonstrating a high level of resistance to wetting, and several non-fluorinated repellent fabrics provide similar water repellency to long-chain (C8) PFAS or shorter-chain (C6) PFAS finished fabrics. The primary repellency function required in outdoor apparel is water repellency, and we would propose that the use of PFAS chemistry for such garments is over-engineering, providing oil repellency that is in excess of user requirements. Accordingly, significant environmental and toxicological benefits could be achieved by switching outdoor apparel to non-fluorinated finishes without a significant reduction in garment water-repellency performance. These conclusions are being supported by further research into the effect of laundering, abrasion and ageing of these fabrics.
Collapse
Affiliation(s)
- Philippa J Hill
- School of Design, University of Leeds, Leeds, LS2 9JT, United Kingdom
| | - Mark Taylor
- School of Design, University of Leeds, Leeds, LS2 9JT, United Kingdom
| | - Parikshit Goswami
- School of Design, University of Leeds, Leeds, LS2 9JT, United Kingdom
| | | |
Collapse
|
20
|
Jaques PA, Gao P, Kilinc-Balci S, Portnoff L, Weible R, Horvatin M, Strauch A, Shaffer R. Evaluation of gowns and coveralls used by medical personnel working with Ebola patients against simulated bodily fluids using an Elbow Lean Test. J Occup Environ Hyg 2016; 13:881-93. [PMID: 27171285 PMCID: PMC9724155 DOI: 10.1080/15459624.2016.1186279] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/16/2023]
Abstract
Gowns and coveralls are important components of protective ensembles used during the management of known or suspected Ebola patients. In this study, an Elbow Lean Test was used to obtain a visual semi-quantitative measure of the resistance of medical protective garments to the penetration of two bodily fluid simulants. Tests were done on swatches of continuous and discontinuous regions of fabrics cut from five gowns and four coveralls at multiple elbow pressure levels (2-44 PSI). Swatches cut from the continuous regions of one gown and two coveralls did not have any strike-through. For discontinuous regions, only the same gown consistently resisted fluid strike-through. As hypothesized, with the exception of one garment, fluid strike-through increased with higher applied elbow pressure, was higher for lower fluid surface tension, and was higher for the discontinuous regions of the protective garments.
Collapse
Affiliation(s)
| | - Pengfei Gao
- Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (NIOSH), National Personal Protective Technology Laboratory, Pittsburgh, Pennsylvania
| | - Selcen Kilinc-Balci
- Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (NIOSH), National Personal Protective Technology Laboratory, Pittsburgh, Pennsylvania
| | - Lee Portnoff
- Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (NIOSH), National Personal Protective Technology Laboratory, Pittsburgh, Pennsylvania
| | | | | | - Amanda Strauch
- Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (NIOSH), National Personal Protective Technology Laboratory, Pittsburgh, Pennsylvania
| | - Ronald Shaffer
- Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (NIOSH), National Personal Protective Technology Laboratory, Pittsburgh, Pennsylvania
| |
Collapse
|
21
|
Laws J. Lasting Protection. Occup Health Saf 2016; 85:52-55. [PMID: 27311208] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
|
22
|
Ben Salah M, Hallé S, Tuduri L. Efficiency of five chemical protective clothing materials against nano and submicron aerosols when submitted to mechanical deformations. J Occup Environ Hyg 2016; 13:425-433. [PMID: 26786065 DOI: 10.1080/15459624.2015.1125490] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Due to their potential toxicity, the use of nanoparticles in the workplace is a growing concern. Some studies indicate that nanoparticles can penetrate the skin and lead to adverse health effects. Since chemical protective clothing is the last barrier to protect the skin, this study aims to better understand nanoparticle penetration behaviour in dermal protective clothing under mechanical deformation. For this purpose, five of the most common types of fabrics used in protective clothing, one woven and four nonwoven, were chosen and submitted to different simulated exposure conditions. They were tested against polydispersed NaCl aerosols having an electrical-mobility diameter between 14 and 400 nm. A bench-scale exposure setup and a sampling protocol was developed to measure the level of penetration of the aerosols through the material samples of disposable coveralls and lab coat, while subjecting them to mechanical deformations to simulate the conditions of usage in the workplace. Particle size distribution of the aerosol was determined upstream and downstream using a scanning mobility particle sizer (SMPS). The measured efficiencies demonstrated that the performances of nonwoven materials were similar. Three nonwovens had efficiencies above 99%, while the woven fabric was by far, the least effective. Moreover, the results established that mechanical deformations, as simulated for this study, did not have a significant effect on the fabrics' efficiencies.
Collapse
Affiliation(s)
- Mehdi Ben Salah
- a École de technologie supérieure , Montreal , Quebec , Canada
| | - Stéphane Hallé
- a École de technologie supérieure , Montreal , Quebec , Canada
| | - Ludovic Tuduri
- b Institut de recherche Robert-Sauvé en santé et en Sécurité du travail , Montreal , Quebec , Canada
| |
Collapse
|
23
|
Zhang H, McQueen RH, Batcheller JC, Ehnes BL, Paskaluk SA. Characterization of Textiles Used in Chefs' Uniforms for Protection Against Thermal Hazards Encountered in the Kitchen Environment. Ann Occup Hyg 2015; 59:1058-73. [PMID: 25925745 DOI: 10.1093/annhyg/mev034] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/16/2014] [Accepted: 03/19/2015] [Indexed: 01/09/2023]
Abstract
Within the kitchen the potential for burn injuries arising from contact with hot surfaces, flames, hot liquid, and steam hazards is high. The chef's uniform can potentially offer some protection against such burns by providing a protective barrier between the skin and the thermal hazard, although the extent to which can provide some protection is unknown. The purpose of this study was to examine whether fabrics used in chefs' uniforms were able to provide some protection against thermal hazards encountered in the kitchen. Fabrics from chefs' jackets and aprons were selected. Flammability of single- and multiple-layered fabrics was measured. Effect of jacket type, apron and number of layers on hot surface, hot water, and steam exposure was also measured. Findings showed that all of the jacket and apron fabrics rapidly ignited when exposed to a flame. Thermal protection against hot surfaces increased as layers increased due to more insulation. Protection against steam and hot water improved with an impermeable apron in the system. For wet thermal hazards increasing the number of permeable layers can decrease the level of protection due to stored thermal energy. As the hands and arms are most at risk of burn injury increased insulation and water-impermeable barrier in the sleeves would improve thermal protection with minimal compromise to overall thermal comfort.
Collapse
Affiliation(s)
- Han Zhang
- Department of Human Ecology, University of Alberta, Edmonton, Alberta T6G 2N1, Canada
| | - Rachel H McQueen
- Department of Human Ecology, University of Alberta, Edmonton, Alberta T6G 2N1, Canada
| | - Jane C Batcheller
- Department of Human Ecology, University of Alberta, Edmonton, Alberta T6G 2N1, Canada
| | - Briana L Ehnes
- Department of Human Ecology, University of Alberta, Edmonton, Alberta T6G 2N1, Canada
| | - Stephen A Paskaluk
- Department of Human Ecology, University of Alberta, Edmonton, Alberta T6G 2N1, Canada
| |
Collapse
|
24
|
Kajiwara N, Takigami H. Emission behavior of hexabromocyclododecanes and polybrominated diphenyl ethers from flame-retardant-treated textiles. Environ Sci Process Impacts 2013; 15:1957-1963. [PMID: 24056914 DOI: 10.1039/c3em00359k] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
To evaluate the emission behavior of hexabromocyclododecanes (HBCDs) and polybrominated diphenyl ethers (PBDEs) added to textile products as flame retardants, we used a small stainless steel container (7 cm i.d. × 5.5 cm height, ca. 210 cm(3)) to conduct emission tests on three upholstery textile samples at temperatures of 20, 40, 60, and 80 °C. The textile samples, which were intended for use in curtain manufacture and had been treated with either technical HBCD or technical DecaBDE, emitted HBCDs and PBDEs, including BDE 209, even at room temperature (20 °C), and the emission rates increased with increasing test temperature. These results indicate that flame-retardant-treated upholstery textiles have the potential to be major sources of brominated flame retardant contamination in indoor air and dust. The HBCD diastereomer emission profiles at the test temperatures of 20 and 40 °C were similar to the profiles of the original textile samples; in contrast, at the higher test temperatures, the proportion of α-HBCD was larger (up to 70% of the total HBCD emission) than in the original samples. At the higher test temperatures, the proportions of di- to hexa-BDEs in the emissions were clearly larger than in the original sample, suggesting that the textile products treated with technical DecaBDE could be a source of environmentally relevant PBDE congeners such as BDE 47, 99, and 100. The emission rates of HBCDs from the textiles were two orders of magnitude higher than those of PBDEs, suggesting that HBCDs volatilize more easily from textile products to the indoor environment than PBDEs.
Collapse
Affiliation(s)
- Natsuko Kajiwara
- Center for Material Cycles and Waste Management Research, National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba, Ibaraki 305-8506, Japan.
| | | |
Collapse
|
25
|
Kaminsky R, Ponthan R. Choosing the right FR fabrics and apparel. Occup Health Saf 2013; 82:28-30. [PMID: 24000566] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
|
26
|
Zareba T, Zawistowska A, Kruszewska H, Mrówka A, Tyski S. [The evaluation of bacteria penetration by medical textiles for multiple use and disposable multilayer surgical drapes, according to the PN-EN ISO 22610 standard]. Med Dosw Mikrobiol 2012; 64:261-270. [PMID: 23285781] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
INTRODUCTION Cotton as well as synthetic textile medical products are widely used as barrier materials and individual protection against displacement of biological infectious factors. The required level of protection of these products for multiple use and disposable multilayer laminates against the penetration of microbes depends on the risk connected with type of surgical procedure defined in normative documents. METHODS. Cotton and syntetic medical textiles for multiple use, 30-times subjected to processes simulating conditions of the use as well as disposable multilayer surgical drapes were tested. Resistance to microbial wet penetration was conducted according to the PN-EN ISO 22610: 2007 standard. RESULTS The barrier of cotton fabrics was reduced after first washing and then systematically grew after each often cycles to the value close to the value at the beginning. From the twentieth cycle of simulated conditions of the use, barrier index was reduced. The barrier of the synthetic textile stayed on the average level, while multilayer disposable products ensured the full impermeability for the bacteria. CONCLUSIONS Natural cotton textiles for multiple use could be apply on operative blocks in limited range because of the changes of the cotton structure caused by repeated laundering process and sterilization. Synthetic materials also have limited application, although are more resistant to cleaning and sterilization processes. Disposable synthetic laminates with many layers use guarantee impermeability for bacteria and may be applied in operative blocks without restrictions.
Collapse
Affiliation(s)
- Tomasz Zareba
- Zaklad Antybiotyków i Mikrobiologii Narodowego Instytutu Leków w Warszawie
| | | | | | | | | |
Collapse
|
27
|
Abstract
UNLABELLED Phase change materials (PCMs) are increasingly incorporated in textiles in order to serve as a thermal buffer when humans change from a hot to a cold environment and the reverse. Due to the absence of wetness sensors in the skin, cooling of the skin may be perceived as a sensation of wetness instead of cold. In order to investigate if this phenomenon occurs when manipulating textiles, nine subjects were asked to touch or manipulate PCM-treated and untreated fabrics. In 75% of the cases, the subjects indicated that the treated material felt wetter than the untreated material independent of the way the textiles were manipulated. We conclude that incorporating PCMs in textiles may lead to a feeling of wetness which might be uncomfortable. Therefore, we recommend investigating a change in cooling properties to minimise this feeling. PRACTITIONER SUMMARY This article describes a psychophysical experiment into the sensation of wetness of textiles treated with phase change materials. It was found that in 75% of the cases, subjects found the treated fabric to feel wetter than the untreated. This may affect the comfort of wearing clothes made of these textiles.
Collapse
|
28
|
Bedek G, Salaün F, Martinkovska Z, Devaux E, Dupont D. Evaluation of thermal and moisture management properties on knitted fabrics and comparison with a physiological model in warm conditions. Appl Ergon 2011; 42:792-800. [PMID: 21277564 DOI: 10.1016/j.apergo.2011.01.001] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/31/2009] [Revised: 10/27/2010] [Accepted: 01/04/2011] [Indexed: 05/30/2023]
Abstract
This study reports on an experimental investigation of physical properties on the textile thermal comfort. Textile properties, such as thickness, relative porosity, air permeability, moisture regain, thermal conductivity, drying time and water-vapour transmission rate have been considered and correlated to the thermal and vapour resistance, permeability index, thermal effusivity and moisture management capability in order to determine the overall comfort performance of underwear fabrics. The results suggested that the fibre type, together with moisture regain and knitted structure characteristics appeared to affect some comfort-related properties of the fabrics. Additionally, thermal sensations, temperature and skin wetness predicted by Caseto® software for three distinct activity levels were investigated. Results show that the data obtained from this model in transient state are correlated to the thermal conductivity for the temperature and to Ret, moisture regain and drying time for the skin wetness. This provides potential information to determine the end uses of these fabrics according to the selected activity level.
Collapse
|
29
|
Bríza J, Krska Z, Pavlíková J. [Legal requirements concerning textile medical products]. Rozhl Chir 2011; 90:517-518. [PMID: 22320116] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
Presently, more and more often the medical public is concerned with questions regarding use of textile products intended for multiple application at operating theatres. Such questions have been evoked especially by spreading information on restrictions regarding purchase and us of health care products or medical means made from cotton of intended for multiple application. Based on this information preference is given to significantly more expensive products intended for single-use only. This decision is being reasoned by conditions given by European standard EN 13795 reportedly prohibiting the application of cotton within health care. Since this piece of information is not precise, we would like to sum-up legislative situation within this area.
Collapse
Affiliation(s)
- J Bríza
- Chirurgická Klinika VFN a LF UK Praha, Odbor Kvality VFN.
| | | | | |
Collapse
|
30
|
Schneider RE. [Special requirements for medical textiles: with silver ions against viruses and odor]. Pflege Z 2010; 63:657-659. [PMID: 21086669] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 05/30/2023]
|
31
|
Chen D, Tan L, Liu H, Tang F, Hu J, Li Y. Fabrication of fast-absorbing and quick-drying wool fabrics with good washing durability. ChemSusChem 2010; 3:1031-1035. [PMID: 20658509 DOI: 10.1002/cssc.201000176] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/26/2023]
Affiliation(s)
- Dong Chen
- Institute of Textiles and Clothing, Hong Kong Polytechnic University, Hung Hom, Hong Kong, P. R. China
| | | | | | | | | | | |
Collapse
|
32
|
Teksheva LM, Barsukova NK, Chumicheva OA, Markelova SV, Nadezhina LG, Khatit ZK, Vorob'eva GV. [Hygienic assessment of children's clothes made using new-generation textile auxiliaries]. Gig Sanit 2009:75-79. [PMID: 19514290] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
The paper presents the results of sanitary-and-chemical studies of samples of tissues treated with new-generation textile auxiliaries (TAs). The application of new-generation TAs containing the lower levels of formaldehyde (FA) is shown not to eliminate the problem of their safe use in making children's clothes. The safe values for exposure to FA have been estimated in relation to the real load of a garment. The toxic action of cutaneous versus intragastric FA has been evaluated in immature rats. The clothes FA level of 20 microg/g has been found to produce no toxic effect on a living organism.
Collapse
|
33
|
Abstract
The inflammatory and fibrotic intensity of a foreign body reaction largely depends on the porosity of the implanted material. Furthermore, the size of the pore and its geometry define the capability to allow tissue ingrowth. We present an image analysis system, which allows objectifying in two dimensions the pores' structure and geometry of textile fabrics, that are used to reinforce the abdominal wall or pelvic floor. The porosity of the textile is measured at four samples with differences in structure. The porosity decreases markedly if foreign body response is considered, leading to the definition of an "effective porosity". Because of the high stiffness of the polymer fibers the elasticity of textile implants usually result from a deformation of the pores, leading to a marked reduction of the effective porosity if a mechanical stress is applied. Further in vivo studies have to investigate, whether the preservation of a high effective porosity under stress may help to improve biocompatibility of textile implants.
Collapse
Affiliation(s)
- Thomas Mühl
- Aachen University of Applied Sciences, Department of Electrical Engineering and Information Technology, Eupener Str. 70, 52066 Aachen, Germany
| | | | | | | |
Collapse
|
34
|
Bahramian AR, Kokabi M, Famili MHN, Beheshty MH. High temperature ablation of kaolinite layered silicate/phenolic resin/asbestos cloth nanocomposite. J Hazard Mater 2008; 150:136-45. [PMID: 17540501 DOI: 10.1016/j.jhazmat.2007.04.104] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/22/2006] [Revised: 04/08/2007] [Accepted: 04/19/2007] [Indexed: 05/15/2023]
Abstract
The successful return of re-entry space vehicle, which is subjected to severe aerodynamic heating, is largely accompanied by some provisions to reduce the heat transfer to the structure. Heat shield is the best protection means which undergoes physical, chemical, and mostly endothermal transformations. The objective of this work is to investigate the ablating, charring, and thermal degradation behaviour of heat shield resol-type phenolic resin/kaolinite/asbestos cloth nanocomposite by oxyacetylene flame test with an external heat flux of 8 x 10(9)W/m(2) and 3000 K hot gas temperature and thermal analyzer techniques. Kinetic parameters of thermal degradation and temperature distribution at the back surface of the nanocomposite heat shield were determined and compared with that of composite counterpart.
Collapse
Affiliation(s)
- Ahmad Reza Bahramian
- Polymer Engineering Group, Chemical Engineering Department, Faculty of Engineering, Tarbiat Modares University, PO Box 14115-143, Tehran, Iran
| | | | | | | |
Collapse
|
35
|
Abstract
This article discusses the analysis of the hydrolysis products from one-step scouring of cotton using pectinase and two-step scouring of cotton using lipase then cellulase, protease then cellulase, or lipase/protease then cellulase, to improve water absorbency of cotton. UV spectrophotometric analysis indicated that the pectinase scouring process produced approximately 18-fold higher amounts of reducing sugars and galacturonic acid than any of the two-step scouring processes. The production rate of reducing sugars and galacturonic acid from most of the scouring processes showed a decrease with an increase in time. HPLC analysis revealed that the lipase/protease/cellulase scouring processes produced approximately 5-fold higher amounts of 17 amino acids than the pectinase scouring process. GC analysis for 18 fatty acids (C(8)-C(24)) revealed that three major fatty acids, palmitic acid, stearic acid, and behenic acid, were found on both the scoured and the unscoured fabrics. Scoured fabrics were tested for content of proteins, extractable components, waxes, and anionic components including pectins, and some differences among the fabric scoured with different enzyme combinations were found.
Collapse
Affiliation(s)
- Porntip Sae-be
- Department of Materials Science, Faculty of Science, Chulalongkorn University, Bangkok, Thailand
| | | | | |
Collapse
|
36
|
[Tested UV-protective clothing for children. Thus the summer is fun!]. Kinderkrankenschwester 2007; 26:325-6. [PMID: 17844684] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 05/17/2023]
|
37
|
Agrawal PB, Nierstrasz VA, Klug-Santner BG, Gübitz GM, Lenting HBM, Warmoeskerken MMCG. Wax removal for accelerated cotton scouring with alkaline pectinase. Biotechnol J 2007; 2:306-15. [PMID: 17219460 DOI: 10.1002/biot.200600169] [Citation(s) in RCA: 40] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
A rational approach has been applied to design a new environmentally acceptable and industrially viable enzymatic scouring process. Owing to the substrate specificity, the selection of enzymes depends on the structure and composition of the substrate, i.e. cotton fibre. The structure and composition of the outer layers of cotton fibre has been established on the basis of thorough literature study, which identifies wax and pectin removal to be the key steps for successful scouring process. Three main issues are discussed here, i.e. benchmarking of the existing alkaline scouring process, an evaluation of several selected acidic and alkaline pectinases for scouring, and the effect of wax removal treatment on pectinase performance. It has been found that the pectinolytic capability of alkaline pectinases on cotton pectin is nearly 75% higher than that of acidic pectinases. It is concluded that an efficient wax removal prior to pectinase treatment indeed results in improved performance in terms of hydrophilicity and pectin removal. To evaluate the hydrophilicity, the structural contact angle (theta) was measured using an auto-porosimeter.
Collapse
Affiliation(s)
- Pramod B Agrawal
- Textile Technology Group, Department of Science and Technology, University of Twente, Enschede, The Netherlands.
| | | | | | | | | | | |
Collapse
|
38
|
Abstract
Easily available commercial enzymes currently have great potential in bast fibre processing and can be modified for different end uses. There are several new technologies using enzymes that are able to modify fibre parameters, achieve requested properties, improve processing results and are more beneficial to the ecology in the area of bast fibre processing and fabrics finishing. Enzymatic methods for retting of flax, "cottonisation" of bast fibres, hemp separation, and processing of flax rovings before wet spinning, etc., fall into this group of new technologies. Such enzymatic biotechnologies can provide benefits in textile, composite, reinforced plastic and other technical applications. Laboratory, pilot and industrial scale results and experiences have demonstrated the ability of selected enzymes to decompose interfibre-bonding layers based on pectin, lignin and hemicelluloses. Texazym SER spray is able to increase flax long fibre yields by more than 40%. Other enzymes in combination with mild mechanical treatment can replace aggressive and energy-intensive processing like Laroche "cottonisation". Texazym SCW and DLG pretreatments of flax rovings are presented.
Collapse
|
39
|
Affiliation(s)
- H Fischer
- Bundesinstitut für Risikobewertung, Thielallee 88-92, 14195 Berlin, BRD
| | | | | |
Collapse
|
40
|
Abstract
This paper introduces an exploratory way to determine how variance relates to the mean in generalized linear models. This novel method employs the robust likelihood technique introduced by Royall and Tsou.A urinary data set collected by Ginsberg et al. and the fabric data set analysed by Lee and Nelder are considered to demonstrate the applicability and simplicity of the proposed technique. Application of the proposed method could easily reveal a mean-variance relationship that would generally be left unnoticed, or that would require more complex modelling to detect.
Collapse
Affiliation(s)
- Tsung-Shan Tsou
- Institute of Statistics, National Central University, Taiwan.
| |
Collapse
|
41
|
Van den Keybus C, Laperre J, Roelandts R. Protection from visible light by commonly used textiles is not predicted by ultraviolet protection. J Am Acad Dermatol 2006; 54:86-93. [PMID: 16384761 DOI: 10.1016/j.jaad.2005.08.059] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/21/2004] [Revised: 08/28/2005] [Accepted: 08/30/2005] [Indexed: 11/28/2022]
Abstract
Interest is increasing in the prevention of acute and chronic actinic damage provided by clothing. This interest has focused mainly on protection against ultraviolet irradiation, but it has now also turned to protection against visible light. This change is mainly due to the action spectrum in the visible light range of some photodermatoses and the increasing interest in photodynamic therapy. The ultraviolet protection provided by commercially available textiles can be graded by determining an ultraviolet protection factor. Several methods have already been used to determine the ultraviolet protection factor. The fact that protection from visible light by textiles cannot be predicted by their ultraviolet protection makes the situation more complicated. This study attempts to determine whether or not the ultraviolet protection factor value of a particular textile is a good parameter for gauging its protection in the visible light range and concludes that a protection factor of textile materials against visible light needs to be developed. This development should go beyond the protection factor definition used in this article, which has some limitations, and should take into account the exact action spectrum for which the protection is needed.
Collapse
|
42
|
Lee S, Obendorf SK. Statistical model of pesticide penetration through woven work clothing fabrics. Arch Environ Contam Toxicol 2005; 49:266-73. [PMID: 16059749 DOI: 10.1007/s00244-004-0127-8] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/08/2004] [Accepted: 09/08/2004] [Indexed: 05/03/2023]
Abstract
Statistical models estimating the level of protection and thermal comfort performance of woven fabrics were developed using simple fabric and liquid parameters. Eighteen woven fabrics were evaluated against three pesticide mixtures of atrazine and pendimethalin at different concentrations. Using three mixtures that represent a range of both surface tension and viscosity, percentages of pesticide penetration are measured, along with fabric thickness, fabric cover factor, yarn twist factor, yarn packing factor, solid volume fraction, wicking height, and air permeability. Statistical analyses are performed to examine the relationship between liquid/fabric parameters and pesticide penetration. Statistical analyses show that fabric cover factor, yarn twist factor, viscosity of pesticide mixture, critical surface tension of solid, and wicking height are significant parameters affecting pesticide penetration. For this purpose, cover factor and twist factor are better parameters in describing the geometry of woven fabrics than solid volume fraction. Modeling of comfort performance of woven fabric based on simple textile parameters shows that the combination of fabric thickness, cover factor, yarn twist factor and yarn packing factor can be used to estimate air permeability of woven fabric. These findings could be used for developing selection charts or tools as guidelines for the selection of personal protective equipment for use in hot, humid environments.
Collapse
Affiliation(s)
- Seungsin Lee
- Department of Textiles and Apparel, Cornell University, Ithaca, New York 14853, USA
| | | |
Collapse
|
43
|
Belkin NL. " False faith in the surgeon's gown" revisited. Bull Am Coll Surg 2005; 90:19-56. [PMID: 18435120] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 05/26/2023]
|
44
|
Macintyre L, Baird M. Pressure garments for use in the treatment of hypertrophic scars -- an evaluation of current construction techniques in NHS hospitals. Burns 2005; 31:11-4. [PMID: 15639359 DOI: 10.1016/j.burns.2004.08.007] [Citation(s) in RCA: 30] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 08/03/2004] [Indexed: 10/26/2022]
Abstract
The purpose of this investigation was to establish the variety of pressure garment construction methods and materials used in UK hospitals. This paper reports an investigation conducted in two parts. First, a survey of pressure garment practitioners was conducted and second, 15 of the fabrics currently used in UK hospitals were tested. The results showed that the pressures exerted by pressure garments constructed in UK hospitals were likely to range from ineffectively low to dangerously high.
Collapse
Affiliation(s)
- Lisa Macintyre
- School of Textiles and Design, Heriot-Watt University, Galashiels, TD1 3HF, UK.
| | | |
Collapse
|
45
|
|
46
|
Belkin NL. If there now is a "standard test" for barrier materials, why the need for two more? Am J Infect Control 2004; 32:313-6. [PMID: 15320340 DOI: 10.1016/j.ajic.2003.10.015] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
47
|
Leonard KM. Solving hot work safety puzzles. Occup Health Saf 2003; 72:58-62. [PMID: 14595925] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 04/27/2023]
|
48
|
Teksheva LM, Barsukova NK. [New methodological approaches to the hygienic standards of clothes for children and adults]. Vestn Ross Akad Med Nauk 2003:37-9. [PMID: 14524116] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 04/27/2023]
Abstract
The hygienic assessment is presently a research issue related mainly with commissioning new materials into production; the above issue is equally related with materials' diversity, with expanding the choice of commodities and with the multi-functionality of the latter as well as with modern technologies and with the forthcoming admittance of our country to the WTO, which necessitates a harmonization of regulating requirements in various countries. The old approaches towards regulations of cloths are outdated and are no longer in line with the requirements of today. The chemical stability of contemporary synthetic fibers and the narrowing-of-gap between their physical-and-hygienic indices and those of natural fibers ensures unified approaches towards the hygienic evaluation of both. A real load that is conceptually found as a product of the impact intensity on the impact duration time is a hygienically valuable criterion ensuring a universal approach towards regulating the cloths hygienic safety. A hygienic classification provides, in case of each item, for defining the index of its hygienic safety (HIS), which is a basis for designing the differential requirements towards cloths of various functional purposes and for various age groups. The area of contact with the skin during wear and the age of consumer are the key components of system (The Hygienic Classification of Cloths". The article is supplemented by 1 drawing, 2 tables and a list of literature (8 entries; article's volume is 5 pages).
Collapse
|
49
|
|
50
|
Abstract
The assessment of UV transmittance of clothing and the determination of the UV protection factor (UPF) are now well established and the influencing factors such as type of fiber, color, and fabric construction are known. Quick and reliable instruments to measure UV transmittance are crucial. Besides expensive scientific laboratory instruments, a low-cost UV meter is now available for this purpose. The questions arise as to what can be done about a given garment and whether there are ways to improve textiles by the consumer. The many opportunities to improve UV protection of clothing along the textile chain of manufacturing are discussed. The latest possibility for improving the UV-protective properties of clothing is now available at the fabric care stage in every household. A UV absorber can be brought into contact with a fabric during the wash or rinse cycle of a laundry operation. The high UV transmittance of 30% of a thin, bleached cotton swatch in the dry state (UPF 3), can be reduced tenfold to about 3% (UPF >30) in ten washes cycles. This is more than the effect achieved by dyestuffs. The detergent should contain about 0.1-0.3% of the special UV absorber. The same effect can be achieved as early as after one wash cycle with a higher concentration provided by a special laundry additive. Yet another form of application is via rinse cycle fabric conditioner. To make these new types of improvement of fabrics visible the Skin Cancer Foundation now provides the possibility for laundry products to qualify for the "Seal of Recommendation".
Collapse
|