Effect of High-radiant Emittance and Short Curing Time on Polymerization Shrinkage Vectors of Bulk Fill Composites

PURPOSE

To evaluate the effect of short curing time using a high-radiant emittance light on polymerization shrinkage vectors in different consistency bulk-fill composites (BFRCs) using micro-computed tomography.

METHODS AND MATERIALS

Radiopaque zirconia fillers were homogeneously incorporated and functioned as radiopaque tracers into two regular-paste: TBFill (Tetric EvoCeram Bulk Fill) and TPFill (Tetric PowerFill), and two flowable (n=6): TBFlow (Tetric EvoFlow Bulk Fill) and TPFlow (Tetric PowerFlow) resin composites. Class I cavities (4 mm depth × 4 mm length × 4 mm width) were 3D-printed and filled in a single increment: TBFill and TBFlow were light-activated using a Bluephase Style 20i (10 seconds in high-mode); TPFill and TPFlow were light-activated using a Bluephase PowerCure (three seconds). The same adhesive system (Adhese Universal) was used for all groups. Microcomputed tomography scans were obtained before and after light-activation. Filler particle movement was identified by polymerization shrinkage vectors at five depths (from 0-4 mm): top, top-middle, middle, middle-bottom and bottom.

RESULTS

TPFlow showed the lowest total vector displacement, followed by TBFlow, TBFill and TPFill, significantly different among each other (p<0.05). Generally, BFRCs showed decreased vector displacement with increased depth, and higher displacement at the top-surface (p<0.05). Qualitative analysis showed a similar pattern of vector magnitude and displacement for groups TBFill and TPFill, with displacement vectors on occlusal (top) surfaces toward the center of the restoration from the top to middle areas, and relatively limited displacement at the bottom. TBFlow and TPFlow showed more displacement on the occlusal (top).

CONCLUSIONS

Short curing time with high-radiant emittance on fast-curing BFRCs was shown to be a feasible option in terms of vector displacement. Flowable BFRCs presented lower vector displacement than their regular-viscosity versions.

Effect of Argon Plasma Surface Treatment on Repair of Resin Composite Aged Two Years

OBJECTIVES

To evaluate the effect of argon plasma treatment (PLA) when combined with sandblasting (SAN), silanization (SIL), and hydrophobic bonding resin (HBR) on the shear bond strength (SBS) of a two-year water-aged resin composite bonded to a newly placed composite after 24 hours and one year of water-storage.

METHODS AND MATERIALS

Thirty-six light-cured composite plates (20mm x 20mm x 4mm thick) were obtained and stored at 37°C in distilled water for 2 years. These aged plates were distributed into 6 groups (n=6) according to the surface treatment: no treatment (Negative Control); SAN+SIL+HBR (Positive Control); SAN+PLA+SIL+HBR; PLA+ SIL+HBR; PLA+SIL; PLA+HBR. Fresh resin composite cylinders were built up using silicone molds (hole: 1.5 mm high x 1.5 mm diameter) positioned over the aged plates. Half of the SBS samples were stored in distilled water for 24 hours and loaded until failure, while the other half were stored for 1 year before being tested. Data were submitted to two-way analysis of variance and post-hoc Tukey Test (preset alpha of 0.05).

RESULTS

Positive Control, SAN+PLA+SIL+HBR and PLA+SIL+HBR groups presented higher SBS means at the 24 hour evaluation. After 1 year of water storage, all groups demonstrated significant SBS reduction, with the SAN+PLA+SIL+HBR group presenting the highest SBS.

CONCLUSIONS

Resin plasma treatment in combination with other surface treatments can improve the SBS of composite repairs after one year of water storage. The SBS of the composite repair was not stable over time regardless of the surface treatment.

Effect of Shortened Light-Curing Modes on Bulk-Fill Resin Composites

CLINICAL RELEVANCE

Shortened light curing does not affect volumetric polymerization shrinkage or cohesive tensile strength but negatively affects the shear bond strength of some bulk-fill resin composites. When performing shortened light curing, clinicians should be aware of the light output of their light-curing units.

SUMMARY

Purpose: To evaluate volumetric polymerization shrinkage (VPS), shear bond strength (SBS) to dentin, and cohesive tensile strength (CTS) of bulk-fill resin composites (BFRCs) light activated by different modes.Methods and Materials: Six groups were evaluated: Tetric EvoCeram bulk fill + high mode (10 seconds; TEC H10), Tetric EvoFlow bulk fill + high mode (TEF H10), experimental bulk fill + high mode (TEE H10), Tetric EvoCeram bulk fill + turbo mode (five seconds; TEC T5), Tetric EvoFlow bulk fill + turbo mode (TEF T5), and experimental bulk fill + turbo mode (TEE T5). Bluephase Style 20i and Adhese Universal Vivapen were used for all groups. All BFRC samples were built up on human molar bur-prepared occlusal cavities. VPS% and location were evaluated through micro-computed tomography. SBS and CTS tests were performed 24 hours after storage or after 5000 thermal cycles; fracture mode was analyzed for SBS.Results: Both TEC H10 and TEE H10 presented lower VPS% than TEF H10. However, no significant differences were observed with the turbo-curing mode. No differences were observed for the same BFRC within curing modes. Occlusal shrinkage was mostly observed. Regarding SBS, thermal cycling (TC) affected all groups. Without TC, all groups showed higher SBS values for high mode than turbo mode, while with TC, only TEC showed decreased SBS from high mode to turbo modes; modes of fracture were predominantly adhesive. For CTS, TC affected all groups except TEE H10. In general, no differences were observed between groups when comparing the curing modes.Conclusions: Increased light output with a shortened curing time did not jeopardize the VPS and SBS properties of the BFRCs, although a decreased SBS was observed in some groups. TEE generally showed similar or improved values for the tested properties in a shortened light-curing time. The VPS was mostly affected by the materials tested, whereas the SBS was affected by the materials, curing modes, and TC. The CTS was not affected by the curing modes.

External Marginal Gap Evaluation of Different Resin-filling Techniques for Class II Restorations-A Micro-CT and SEM Analysis

CLINICAL RELEVANCE

Secondary caries are the main reason for the failure of restorations, class II being the most affected. Techniques that promote less gap percentage are important. Flowable bulk fill composites used at such locations have been shown to decrease gap formation while being a faster procedure than an incremental technique.

SUMMARY

Effect of Thermocycling on Biaxial Flexural Strength of CAD/CAM, Bulk Fill, and Conventional Resin Composite Materials

New resin-based restorative materials have been developed, such as computer-aided design/computer-aided manufacturing (CAD/CAM) and bulk-fill composites, as an alternative to traditional layering techniques. This study evaluated the biaxial flexural strength (BFS) before and after thermocycling of five different resin composites: one hybrid resin/ceramic CAD/CAM indirect material, Lava Ultimate CAD-CAM Restorative (LU, 3M Oral Care); a conventional composite, Filtek Z350 XT (Z350, 3M Oral Care); two bulk-fill composites, Tetric N-Ceram Bulk Fill (TBF, Ivoclar Vivadent) and Filtek Bulk Fill (FBF, 3M Oral Care); and one bulk-fill flow resin composite, Filtek Bulk Fill Flow (FBFF, 3M Oral Care). Three hundred disc-shaped specimens (6.5 mm in diameter and 0.5 mm thick) were fabricated and divided into five groups (n=30 for each composite and condition). The BFS test was performed in a universal testing machine at a crosshead speed of 0.5 mm/min immediately (i, 24 hours) and after thermocycling (a, 500 thermal cycles of 5°C to 55°C with a 30-second dwell time). The Weibull modulus (m) and characteristic stress (η) were calculated, and a contour plot was used (m vs η) to detect differences between groups (95% two-sided confidence intervals). Significantly higher characteristic stress was observed for LUi (286.6 MPa) and Z350i (248.8 MPa) compared to the bulk-fill groups (FBFi=187.9 MPa, FBFFi=175.9 MPa, TBFi=149.9 MPa), with no differences between LUi and Z350i. Thermocycling significantly decreased the characteristic stress of all groups with the highest values observed for LUa (186.7 MPa) and Z350a (188.9 MPa) and the lowest for FBFFa (90.3 MPa). Intermediate values were observed for FBFa (151.6 MPa) and TBFa (122.8 MPa). The Weibull modulus decreased only for FBFa compared to FBFi. Composition and thermocycling significantly influenced the biaxial flexural strength of resin composite materials.

Effect of Argon Plasma Surface Treatment on Bond Strength of Resin Composite Repair

Objectives:

This study evaluated the effect of argon plasma treatment (PLA) and its combination with sandblasting (SAN), silanization (SIL), and hydrophobic bonding resin (HBR) application on the micro-shear bond strength of water-aged restorative resin composite to a newly placed composite, simulating restoration repair.

Methods and Materials:

Forty-five light-cured composite plates (20-mm long × 20-mm wide × 4-mm thick) were fabricated using a hybrid composite and stored at 37°C in distilled water for six months. The aged composite surfaces were treated according to the following experimental groups, varying both treatment and order of application: 1) SAN + SIL + HBR (control), 2) SAN + PLA for 30 seconds + SIL + HBR, 3) SAN + SIL + PLA + HBR, 4) PLA + SIL + HBR, 5) PLA + SIL, 6) PLA + HBR, 7) SIL + PLA + HBR, 8) SIL + PLA, and 9) PLA. After the surface treatments, four fresh resin composite cylinders (1.5-mm high × 1.5-mm diameter) of the same composite were built on each aged composite surface using a silicone mold. After water storage for 24 hours or one year, the specimens were submitted to shear bond strength testing. Data were statistically analyzed by two-way analysis of variance and Tukey's test (5%).

Results:

Groups 1, 2, and 4 presented significantly higher bond strength means at 24 hours, although group 4 did not differ from group 7. Groups 5, 8, and 9 demonstrated significantly lower means than the other groups. Even though groups 1 and 2 had a significant bond strength reduction after 1 year, they still demonstrated higher bond strength at one year of storage.

Conclusions:

While PLA application combined with surface treatment methods demonstrated high bond strength results, this treatment alone was not as beneficial as other methods that included SAN, SIL and HBR.

Effect of Sonic Resin Composite Delivery on Void Formation Assessed by Micro-computed Tomography

OBJECTIVES

The aim of this study was to quantify the internal void volume formation in commercially available, resin composites inserted using conventional or sonic insertion methods, and analyzed using three-dimensional (3D) micro-computed tomography (μCT).

METHODS AND MATERIALS

Four resin composites were evaluated: one conventional (Herculite, Ultra, Kerr Corporation, Orange, CA, USA), one flowable bulk fill (SureFil SDR Flow, Dentsply International, York, PA, USA), and two packable bulk fill (SonicFill, Kerr Corporation, and Tetric EvoCeram Bulk Fill, Ivoclar Vivadent Inc, Schaan, Liechtenstein). Eight groups were evaluated according to each resin composite type and insertion method (conventional or sonic; n=5). Forty ABS 3D-printed cylindrical molds, 5.0 mm in diameter and 4.0 mm in depth, were fabricated. For the conventional resin composite, the mold was filled incrementally (two layers), while for bulk-fill resin composites, insertion was performed in a single increment. The sonic insertion method was performed using a specific handpiece (SonicFill Handpiece, Kerr Corporation). Resin composites were light cured using a multipeak light-emitting diode light-curing unit (VALO, Ultradent Products Inc, South Jordan, UT, USA) in its regular mode. Samples were evaluated by μCT, and data were imported into software (Amira, version 5.5.2, VSG, Burlington, MA, USA) for 3D reconstruction, from which the percentage of void volume was calculated. Data were analyzed using two-way analysis of variance and Tukey post hoc test at a preset alpha of 0.05.

RESULTS

The conventional insertion method resulted in reduced porosity, compared with sonic insertion, for SureFil SDR Flow and Tetric EvoCeram bulk fill. The sonic insertion method did not demonstrate any influence on void formation for Herculite Ultra or SonicFill.

CONCLUSION

Results suggest that the sonic insertion method might increase void formation during resin composite delivery, depending on restorative material brand.

Glacial recharge, salinisation and anthropogenic contamination in the coastal aquifers of Recife (Brazil)

Implying large residence times and complex water origins deep coastal aquifers are of particular interest as they are remarkable markers of climate, water use and land use changes. Over the last decades, the Metropolitan Region of Recife (Brazil) went through extensive environmental changes increasing the pressure on water resources and giving rise to numerous environmental consequences on the coastal groundwater systems. We analysed the groundwater of the deep aquifers Cabo and Beberibe that are increasingly exploited. The processes potentially affecting groundwater residence times and flow paths have been studied using a multi-tracer approach (CFCs, SF6, noble gases, 14C, 2H and 18O). The main findings of these investigations show that: (1) Groundwaters of the Cabo and Beberibe aquifers have long residence times and were recharged about 20,000years ago. (2) Within these old groundwaters we can find palaeo-climate evidences from the last glacial period at the tropics with lower temperatures and dryer conditions than the present climate. (3) Recently, the natural slow dynamic of these groundwater systems was significantly affected by mixing processes with contaminated modern groundwater coming from the shallow unconfined Boa Viagem aquifer. (4) The large exploitation of these aquifers leads to a modification of the flow directions and causes the intrusion through palaeo-channels of saline water probably coming from the Capibaribe River and from the last transgression episodes. These observations indicate that the current exploitation of the Cabo and Beberibe aquifers is unsustainable regarding the long renewal times of these groundwater systems as well as their ongoing contamination and salinisation. The groundwater cycle being much slower than the human development rhythm, it is essential to integrate the magnitude and rapidity of anthropogenic impacts on this extremely slow cycle to the water management concepts.

Microcomputed Tomography Evaluation of Polymerization Shrinkage of Class I Flowable Resin Composite Restorations

The present study aimed to characterize the pattern and volume of polymerization shrinkage of flowable resin composites, including one conventional, two bulk fill, and one self-adhesive. Standardized class I preparations (2.5 mm depth × 4 mm length × 4 mm wide) were performed in 24 caries-free human third molars that were randomly divided in four groups, according to the resin composite and adhesive system used: group 1 = Permaflo + Peak Universal Bond (PP); group 2 = Filtek Bulk Fill + Scotchbond Universal (FS); group 3 = Surefil SDR + XP Bond (SX); and group 4 = Vertise flow self-adhering (VE) (n=6). Each tooth was scanned three times using a microcomputed tomography (μCT) apparatus. The first scan was done after the cavity preparation, the second after cavity filling with the flowable resin composite before curing, and the third after it was cured. The μCT images were imported into three-dimensional rendering software, and volumetric polymerization shrinkage percentage was calculated for each sample. Data were submitted to one-way analysis of variance and post hoc comparisons. No significant difference was observed among PP, FS, and VE. SX bulk fill resin composite presented the lowest values of volumetric shrinkage. Shrinkage was mostly observed along the occlusal surface and part of the pulpal floor. In conclusion, polymerization shrinkage outcomes in a 2.5-mm deep class I cavity were material dependent, although most materials did not differ. The location of shrinkage was mainly at the occlusal surface.

Groundwater contamination in coastal urban areas: Anthropogenic pressure and natural attenuation processes. Example of Recife (PE State, NE Brazil)

In a context of increasing land use pressure (over-exploitation, surface-water contamination) and repeated droughts, identifying the processes affecting groundwater quality in coastal megacities of the tropical and arid countries will condition their long-term social and environmental sustainability. The present study focuses on the Brazilian Recife Metropolitan Region (RMR), which is a highly urbanized area (3,743,854 inhabitants in 2010) on the Atlantic coast located next to an estuarial zone and overlying a multi-layered sedimentary system featured by a variable sediment texture and organic content. It investigates the contamination and redox status patterns conditioning potential attenuation within the shallow aquifers that constitute the interface between the city and the strategic deeper semi-confined aquifers. These latter are increasingly exploited, leading to high drawdown in potenciometric levels of 20-30m and up to 70m in some high well density places, and potentially connected to the surface through leakage. From a multi-tracer approach (major ions, major gases, δ(11)B, δ(18)O-SO4, δ(34)S-SO4) carried out during two field campaigns in September 2012 and March 2013 (sampling of 19 wells and 3 surface waters), it has been possible to assess the contamination sources and the redox processes. The increasing trend for mineralization from inland to coastal and estuarial wells (from 119 to around 10,000μS/cm) is at first attributed to water-rock interactions combined with natural and human-induced potentiometric gradients. Secondly, along with this trend, one finds an environmental pressure gradient related to sewage and/or surface-channel network impacts (typically depleted δ(11)B within the range of 10-15‰) that are purveyors of chloride, nitrate, ammonium and sulfate. Nitrate, ammonium and sulfate (ranging from 0 to 1.70mmol/L, from 0 to 0,65mmol/L, from 0.03 to 3.91mmol/L respectively are also potentially produced or consumed through various redox processes (pyrite oxidation, denitrification, dissimilatory nitrate reduction to ammonium) within the system, as is apparent within a patchwork of biogeochemical reactors. Furthermore, intensive pumping in the coastal area with its high well density punctually leads to temporary well salinization ([Cl] reaching temporarily 79mmol/L). Our results, summarized as a conceptual scheme based on environmental conditions, is a suitable basis for implementing sustainable management in coastal sedimentary hydrosystems influenced by highly urbanized conditions.

Infective endocarditis in Rio de Janeiro, Brazil: a 5-year experience at two teaching hospitals

INTRODUCTION

Despite the recent advances in diagnosis and treatment, mortality rates due to infective endocarditis (IE) remain high if not aggressively treated with antibiotics, whether or not associated with surgery. Data on the prevalence, epidemiology and etiology of IE from developing countries remain scarce. The aim of this observational, prospective cohort study was to report a 5-year experience of IE at two teaching hospitals in Rio de Janeiro, Brazil.

MATERIAL AND METHODS

Demographical, anamnestic and microbiological characteristics of 71 IE patients were evaluated during the period of January 2009 to March 2013.

RESULTS

The mean age of the IE patients was 49.8 ± 2.4 years, of which 41 (57.7%) were males. The median time between the onset of symptoms and diagnosis of IE was 35.8 ± 4.8 days. A total of 31 (43.6%) cases of community-acquired infective endocarditis (CAIE) and 40 (56.3%) cases of healthcare-acquired infective endocarditis (HAIE) were observed. Staphylococcus aureus (30%) was the predominant cause of IE. Streptococcus spp. (45.1 %) was the predominant cause of the CAIE while S. aureus (32.5%) and Enterococcus spp. (27.2 %) were the main etiological agents of HAIE. For 64 (90.1 %) patients with native valve endocarditis, the mitral valve was the most commonly affected (48.3%). The main source of IE in this cohort was intravascular catheter. The tricuspid valve and renal chronic insufficiency were more frequent in patients with HAIE than CAIE (p = 0.001). The risk factors associated with in-hospital mortality rate (46.4%) in IE patients were: age over 45 (OR 3.4; 95% CI 1.03-11.24; p = 0.04) and chronic renal insufficiency (OR 38.3; 95% CI 3.2-449.4; p = 0.004).

CONCLUSIONS

At two main teaching hospitals in Brazil, Streptococcus spp. was the principal pathogen of CAIE while S. aureus and Enterococcus spp. were the most frequent causes of HAIE. IE remains a serious disease associated with high in-hospital mortality rate (46.6%); especially, in individuals over 45 years of age and with renal failure. Data suggest that early surgery may improve the outcome of IE patients.

A codon-optimized bacterial antibiotic gene used as selection marker for stable nuclear transformation in the marine red alga Pyropia yezoensis

Marine macroalgae play an important role in marine coastal ecosystems and are widely used as sea vegetation foodstuffs and for industrial purposes. Therefore, there have been increased demands for useful species and varieties of these macroalgae. However, genetic transformation in macroalgae has not yet been established. We have developed a dominant selection marker for stable nuclear transformation in the red macroalga Pyropia yezoensis. We engineered the coding region of the aminoglycoside phosphotransferase gene aph7″ from Streptomyces hygroscopicus to adapt codon usage of the nuclear genes of P. yezoensis. We designated this codon-optimized aph7″ gene as PyAph7. After bombarding P. yezoensis cells with plasmids containing PyAph7 under the control of their endogenous promoter, 1.9 thalli (or individuals) of hygromycin-resistant strains were isolated from a 10-mm square piece of the bombarded thallus. These transformants were stably maintained throughout the asexual life cycle. Stable expression of PyAph7was verified using Southern blot analysis and genomic PCR and RT-PCR analyses. PyAph7 proved to be a new versatile tool for stable nuclear transformation in P. yezoensis.

Impacts of urbanization on groundwater hydrodynamics and hydrochemistry of the Toluca Valley aquifer (Mexico)

The Toluca Valley is located on the high plains of Mexico, where there are significant industrial zones and large populations. Water needs are almost exclusively met by groundwater, which has brought about intense exploitation of the aquifer and indication of some contamination. The present study investigates the effect of urbanization, related to industrialization of the region, on groundwater in the central portion of the Toluca Valley aquifer--a zone with high population density and where the largest industrial park is located. A general decline in the groundwater level has been found over the years, at a rate of as much as 2.5 m/year. The appearance of a large drawdown cone was identified, indicating changes in the direction of groundwater flow. Also identified was the presence of several ground fissures, the location of which coincided with the drawdown cone. In hydrochemical terms, the water type is sodium-magnesium bicarbonate and this characteristic has not changed over time, although it has been possible to detect the presence of larger quantities of sulfates (up to 117 mg/L) and nitrates (up to 47 mg/L) in recent years, likely associated with contamination from industrial and urban wastewater. Factor analysis made it possible to identify ions that would characterize natural processes involving the acquisition of salts (HCO3 (-), Na(+), Mg(2+), and Si), as well as anthropic activities (SO4 (2-), NO3 (-), Cl(-), Ca(2+), and K(+)).

SubMICs of penicillin and erythromycin enhance biofilm formation and hydrophobicity of Corynebacterium diphtheriae strains

Subinhibitory concentrations (subMICs) of antibiotics may alter bacterial surface properties and change microbial physiology. This study aimed to investigate the effect of a subMIC (&frac18; MIC) of penicillin (PEN) and erythromycin (ERY) on bacterial morphology, haemagglutinating activity, cell-surface hydrophobicity (CSH) and biofilm formation on glass and polystyrene surfaces, as well as the distribution of cell-surface acidic anionic residues of Corynebacterium diphtheriae strains (HC01 tox(-) strain; CDC-E8392 and 241 tox(+) strains). All micro-organisms tested were susceptible to PEN and ERY. Growth in the presence of PEN induced bacterial filamentation, whereas subMIC of ERY caused cell-size reduction of strains 241 and CDC-E8392. Adherence to human erythrocytes was reduced after growth in the presence of ERY, while CSH was increased by a subMIC of both antibiotics in bacterial adherence to n-hexadecane assays. Conversely, antibiotic inhibition of biofilm formation was not observed. All strains enhanced biofilm formation on glass after treatment with ERY, while only strain 241 increased glass adherence after cultivation in the presence of PEN. Biofilm production on polystyrene surfaces was improved by &frac18; MIC of ERY. After growth in the presence of both antimicrobial agents, strains 241 and CDC-E8392 exhibited anionic surface charges with focal distribution. In conclusion, subMICs of PEN and ERY modified bacterial surface properties and enhanced not only biofilm formation but also cell-surface hydrophobicity. Antibiotic-induced biofilm formation may contribute to the inconsistent success of antimicrobial therapy for C. diphtheriae infections.

Molecular characterization and expression analysis of sodium pump genes in the marine red alga Porphyra yezoensis

Sodium pumps (EC 3.6.3.9, Na(+)-ATPase), which mediate excretion of Na(+) from the cell, play a crucial role in Na(+) homeostasis in eukaryotic cells. The objective of this study is to understand the Na(+) efflux system in a marine red alga. We identified a novel sodium pump gene, PyKPA2, from the marine red alga Porphyra yezoensis. The amino acid sequence of PyKPA2 shares 65 % identity with PyKPA1, a previously identified P. yezoensis sodium pump. Similar to PyKPA1, PyKPA2 contains conserved sequences for functions such as phosphorylation, ATP binding, and cation binding. Phylogenetic analysis revealed that the two genes cluster with sodium pumps from algae. Reverse-transcription polymerase chain reaction (RT-PCR) analysis showed that PyKPA1 is expressed preferentially in sporophytes, whereas PyKPA2 is expressed specifically in gametophytes. RT-PCR and quantitative real-time PCR analysis revealed that PyKPA1 and PyKPA2 transcripts were upregulated and downregulated, respectively, in gametophytes during exposure to alkali stress. In addition, transcription of both genes in gametophytes was also induced by cold stress. These results suggest that PyKPA1 and PyKPA2 play an important role in alkali and cold stress tolerance.

Transient gene expression system established in Porphyra yezoensis is widely applicable in Bangiophycean algae

The establishment of transient gene expression systems in the marine red macroalga Porphyra yezoensis has been useful for the molecular analysis of cellular processes in this species. However, there has been no successful report about the expression of foreign genes in other red macroalgae, which has impeded the broader understanding of the molecular biology of these species. We therefore examined whether the P. yezoensis transient gene expression system was applicable to other red macroalgae. The results indicated that a codon-optimized GUS, designated PyGUS, and plant-adapted sGFP(S65T) were successfully expressed under the control of the P. yezoensis PyAct1 promoter in gametophytic cells of six Porphyra species and also in Bangia fuscopurpurea, all of which are classified as Bangiophyceae. In contrast, there were no reporter-expressing cells in the Florideophycean algae examined. These results indicate the availability of PyGUS and sGFP as reporters and the 5' upstream region of the PyAct1 gene as a heterologous promoter for transient gene expression in Bangiophycean algae, which could provide a clue to the efficient expression of foreign genes and transformation in marine red macroalgae.

Heterologous activation of the Porphyra tenera HSP70 promoter in Bangiophycean algal cells

Porphyra has attracted great attention for its biological and industrial importance. However, establishment of a stable nuclear transformation has not yet been achieved in these organisms, which impedes the molecular biological study and the development of a molecular breeding method for them. Toward establishing the stable transformation, we have recently developed an efficient transient gene expression system in Bangiophycean algae, in which the HSP70 promoter from P. tenera (PtHSP70 promoter) was activated heterologously in P. yezoensis cells. Since heterologous promoters are required for homologous recombination-based stable transformation, the identification of heterologously activated promoters is important in establishing a stable transformation system in individual Bangiophycean alga. We here examined the activation of the PtHSP70 promoter using the GC-rich PyGUS reporter system in additional Porphyra and Bangia species. The results indicated that this promoter drove expression of the PyGUS gene efficiently in all examined algae, whereas there was quite low expression of PyGUS by the cauliflower mosaic virus 35S promoter that is widely used as a heterologous promoter in the transformation of green land plants. Therefore, heterologous activation of the PtHSP70 promoter could promote the establishment of the stable transformation system in various kinds of Bangiophycean algae.

Population pharmacokinetics of fluconazole after administration of fosfluconazole and fluconazole in critically ill patients

WHAT IS KNOWN AND OBJECTIVE

Fluconazole is an antifungal agent that is commonly used to treat patients with serious systemic fungal infections in intensive care units. Fosfluconazole is a phosphate prodrug of fluconazole, which was developed to reduce the volume of fluid required to administer fluconazole by intravenous injection. The objective of this study was to characterize the pharmacokinetics of the antifungal fluconazole after the intravenous administration of the prodrug fosfluconazole or fluconazole in critically ill patients with serious systemic fungal infections, by population pharmacokinetic analysis using the nonmem software package.

METHODS

Clinical biochemical data including serum fluconazole levels were obtained from 57 patients treated in the intensive care unit along with two naïve pooled patients gleaned from previous reports. The pharmacokinetic model of fluconazole was estimated using a one-compartment model. The probability that the area under the concentration-time curve is higher than 800 μg h/mL was determined by simulation.

RESULTS

It was assumed that all the administered fosfluconazole was converted to fluconazole with an estimated fosfluconazole-fluconazole conversion rate constant of 2·05/h. The significant covariates for clearance for fluconazole (CL) and volume of distribution for fluconazole (Vd) were resulted in creatinine clearance (CLcr) and body weight (BW), respectively, in the final pharmacokinetic model equations: CL (L/h) = 0·799 × [CLcr (mL/min)/92·7](0·685) and Vd (L) = 48·1 × [BW (kg)/65](1·40) , where the interpatient variabilities in CL and Vd and the intrapatient variability were 44·8%, 79·7% and 19·8%, respectively. On the basis of the results of the Monte Carlo simulation, the probabilities of target attainment were 60%, 26% and 11% for 400 mg/day administration as fluconazole equivalent at CLcr values of 40, 70 and 100 mL/min, respectively.

WHAT IS NEW AND CONCLUSION

The present population pharmacokinetic analysis strongly indicates that fosfluconazole (and fluconazole) dosage should be optimized in terms of CLcr in critically ill patients.

Plasticity of Corynebacterium diphtheriae pathogenicity islands revealed by PCR

Despite the existence of a vaccine against diphtheria, this disease remains endemic and is reemerging in several regions due to many factors, including variations in genes coding for virulence factors. One common feature of virulence factors is their high concentration in pathogenicity islands (PAIs), very unstable regions acquired via horizontal gene transfer, which has lead to the emergence of various bacterial pathogens. The 13 putative PAIs in Corynebacterium diphtheriae NCTC 13129 and the reemergence of this disease point to the great variability in the PAIs of this species, which may reflect on bacterial life style and physiological versatility. We investigated the relationships between the large number of PAIs in C. diphtheriae and the possible implications of their plasticity in virulence. The GenoFrag software was used to design primers to analyze the genome plasticity of two pathogenicity islands of the reference strain (PiCds 3 and 8) in 11 different strains. We found that PiCd 3 was absent in only two strains, showing genes playing putative important roles in virulence and that only one strain harbored PiCd 8, due to its location in a putative "hotspot" for horizontal gene transfer events.

Strain-dependent arthritogenic potential of the zoonotic pathogen Corynebacterium ulcerans

During the last decade the majority of diphtheria cases in Europe had Corynebacterium ulcerans as the etiologic agent with dogs and cats as the reservoir hosts. However, little has been documented about the virulence factors of this zoonotic pathogen. To set up an in vivo experimental C. ulcerans infection model, conventional Swiss Webster mice were intravenously infected with different doses (from 1 × 10(7) to 5 × 10(9) bacteria per mouse) of C. ulcerans strains, namely 809 (from human lower respiratory tract), BR-AD22 (from asymptomatic dog nares) and CDC-KC279. Mortality rates were demonstrated by LD(50) values ranging from 1.9 × 10(8) to 1.3 × 10(9). Viable bacteria were recovered from blood, kidneys, liver, spleen and joints. For CDC-KC279 and 809 strains (2 × 10(8)mL(-1)) approximately 85% and 72% of animals with articular lesions were observed, respectively; BR-AD22-infected mice showed no signs of arthritis. CDC-KC279 and 809 strains exhibited higher arthritogenic potential when compared to the homologous toxigenic (ATCC27012) and non-toxigenic (ATCC27010) strains of Corynebacterium diphtheriae. A high number of affected joints and arthritis index in addition to the histopathological features, including subcutaneous edema, inflammatory infiltrate, damage to bone tissue and synoviocyte hypertrophy, indicated a strain-dependent ability of C. ulcerans strains to cause severe polyarthritis. A correlation between the arthritis index and systemic levels of IL-6 and TNF-α was observed for C. ulcerans strains, with the exception of the non-arthritogenic BR-AD22 strain. In conclusion, C. ulcerans revealed a strain-dependent arthritogenic potential independent of DNAse, PLD and diphtheria toxin production.

Expression and purification of the immunogenically active fragment B of the Park Williams 8 Corynebacterium diphtheriae strain toxin

The construction of a hexahistidine-tagged version of the B fragment of diphtheria toxin (DTB) represents an important step in the study of the biological properties of DTB because it will permit the production of pure recombinant DTB (rDTB) in less time and with higher yields than currently available. In the present study, the genomic DNA of the Corynebacterium diphtheriae Park Williams 8 (PW8) vaccine strain was used as a template for PCR amplification of the dtb gene. After amplification, the dtb gene was cloned and expressed in competent Escherichia coli M15 cells using the expression vector pQE-30. The lysate obtained from transformed E. coli cells containing the rDTB PW8 was clarified by centrifugation and purified by affinity chromatography. The homogeneity of the purified rDTB PW8 was confirmed by immunoblotting using mouse polyclonal anti-diphtheria toxoid antibodies and the immune response induced in animals with rDTB PW8 was evaluated by ELISA and dermonecrotic neutralization assays. The main result of the present study was an alternative and accessible method for the expression and purification of immunogenically reactive rDTB PW8 using commercially available systems. Data also provided preliminary evidence that rabbits immunized with rDTB PW8 are able to mount a neutralizing response against the challenge with toxigenic C. diphtheriae.

Diphtheria toxin IgG levels in military and civilian blood donors in Rio de Janeiro, Brazil

Serologic data on diseases that are preventable by vaccines are necessary to evaluate the success of immunization programs and to identify susceptible subgroups. In the present study, we determined serum IgG levels against diphtheria toxin of military and civilian blood donors (N = 75; 69.3% males and 30.7% females) aged 18-64 years, from the Brazilian Army Biology Institute, Rio de Janeiro, using a commercial diphtheria kit (Diphtheria IgG ELISA; IBL, Germany). Most (63%) unprotected military donors were from the older age group of 41 to 64 years. In contrast, the majority (71%) of young military donors (18 to 30 years) were fully protected. About half of the military donors aged 31 to 40 years were protected against diphtheria. Among the civilians, about 50% of persons aged 18 to 30 years and 31 to 40 years had protective antibody levels against diphtheria as also did 64% of individuals aged 41 to 64 years. All civilians had a similar antibody response (geometric mean = 0.55 IU/mL) independent of age group. Military donors aged 18-30 years had higher IgG levels (geometric mean = 0.82 IU/mL) than military donors of 41-64 years (geometric mean = 0.51 IU/mL; P > 0.05). In conclusion, the existence of a considerable proportion of susceptible adults supports the position that reliable data on the immune status of the population should be maintained routinely and emphasizes the importance of adequate immunization during adulthood.

Potential pathogenic role of aggregative-adhering Corynebacterium diphtheriae of different clonal groups in endocarditis

Invasive diseases caused by Corynebacterium diphtheriae have been described increasingly. Several reports indicate the destructive feature of endocarditis attributable to nontoxigenic strains. However, few reports have dealt with the pathogenicity of invasive strains. The present investigation demonstrates a phenotypic trait that may be used to identify potentially invasive strains. The study also draws attention to clinical and microbiological aspects observed in 5 cases of endocarditis due to C. diphtheriae that occurred outside Europe. Four cases occurred in female school-age children (7-14 years) treated at different hospitals in Rio de Janeiro, Brazil. All patients developed other complications including septicemia, renal failure and/or arthritis. Surgical treatment was performed on 2 patients for valve replacement. Lethality was observed in 40% of the cases. Microorganisms isolated from 5 blood samples and identified as C. diphtheriae subsp mitis (N = 4) and C. diphtheriae subsp gravis (N = 1) displayed an aggregative adherence pattern to HEp-2 cells and identical one-dimensional SDS-PAGE protein profiles. Aggregative-adhering invasive strains of C. diphtheriae showed 5 distinct RAPD profiles. Despite the clonal diversity, all 5 C. diphtheriae invasive isolates seemed to display special bacterial adhesive properties that may favor blood-barrier disruption and systemic dissemination of bacteria. In conclusion, blood isolates from patients with endocarditis exhibited a unique adhering pattern, suggesting a pathogenic role of aggregative-adhering C. diphtheriae of different clones in endocarditis. Accordingly, the aggregative-adherence pattern may be used as an indication of some invasive potential of C. diphtheriae strains.

Irsogladine maleate counters the interleukin-1 beta-induced suppression in gap-junctional intercellular communication but does not affect the interleukin-1 beta-induced zonula occludens protein-1 levels in human gingival epithelial cells

BACKGROUND AND OBJECTIVE

Irsogladine maleate counters gap junctional intercellular communication reduction induced by interleukin-8 or Actinobacillus actinomycetemcomitans in cultured human gingival epithelial cells. Interleukin-1 beta is involved in periodontal disease. Little is known, however, about the effect of interleukin-1 beta on intercellular junctional complexes in human gingival epithelial cells. Furthermore, irsogladine maleate may affect the actions of interleukin-1 beta. In this study, we examined how interleukin-1 beta affected gap junctional intercellular communication, connexin 43 and zonula occludens protein-1, and how irsogladine maleate modulated the interleukin-1 beta-induced changes in the intercellular junctional complexes in human gingival epithelial cells.

MATERIAL AND METHODS

Human gingival epithelial cells were exposed to interleukin-1 beta, with or without irsogladine maleate. Connexin 43 and zonula occludens protein-1 were examined at mRNA and protein levels by real-time polymerase chain reaction and western blotting, respectively. Gap junctional intercellular communication was determined using the dye transfer method. The expression of zonula occludens protein-1 was also confirmed by immunofluorescence.

RESULTS

Interleukin-1 beta decreased connexin 43 mRNA levels, but increased zonula occludens protein-1 mRNA levels. Irsogladine maleate countered the interleukin-1 beta-induced reduction in gap junctional intercellular communication and connexin 43 levels. However, irsogladine maleate did not influence the increased zonula occludens protein-1 levels.

CONCLUSION

The effect of interleukin-1 beta on gap junctional intercellular communication and tight junctions of human gingival epithelial cells is different. The recovery of gap junctional intercellular communication by irsogladine maleate in the gingival epithelium may be a normal process in gingival epithelial homeostasis.

Periodontal disease as reservoir for multi-resistant and hydrolytic enterobacterial species

AIMS

This investigation aimed to isolate enteric rods from subgingival sites of patients presenting chronic periodontitis lesions, and to assess antimicrobial resistance and expression of hydrolytic enzymes.

METHODS AND RESULTS

Enterobacteriaceae were isolated from 20% patients, and assayed for antimicrobial susceptibility and hydrolytic enzymes with specificity to different substrates. Isolates comprised seven Enterobacter cloacae (43.75%), five Serratia marcescens (31.25%), one Klebsiella pneumoniae (6.25%), one Enterobacter aerogenes (6.25%), one Pantoea agglomerans (6.25%), and one Citrobacter freundii (6.25%). Gelatinase activity was observed for 75% strains; caseinase and elastase was produced by six and two strains, respectively. DNase, lecithinase and lipase were expressed by S. marcescens. Most of strains were resistant to ampicillin (93.75%) and amoxicillin/clavulanic acid (81.25%). The majority of strains were susceptible to cephalosporins and aztreonam. Enterobacteria remained susceptible to imipenem, streptomycin and fluoroquinolones. Resistance to gentamicin, amikacin, sulfamethoxazole/thrimethoprim, tetracycline, and chloramphenicol were also observed. Eight strains presented multiple drug resistance.

CONCLUSIONS

Subgingival sites from periodontal diseases contain multi-resistant and hydrolytic enzyme-producing enterobacteria that may contribute to overall tissue destruction and spreading.

SIGNIFICANCE AND IMPACT OF THE STUDY

Enterobacteria isolated from patients generally considered as healthy individuals poses periodontal diseases as reservoir for systemic infections particularly in immunocompromised and hospitalized hosts.

Association of human leukocyte antigen and T cell message with human papillomavirus 16–positive cervical neoplasia in Japanese women

To investigate whether an association exists between human leukocyte antigen (HLA) haplotype and cervical neoplasia within the Japanese population, we analyzed the human papillomavirus (HPV) genotypes, the HLA class I specificities and class II alleles, and the T-cell responses in the lesions of patients with cervical neoplasia. Eighty-one patients, consisting of 62 cervical intraepithelial neoplasia (CIN) lesions and 19 invasive cervical cancers (ICC), were examined. The frequencies of HPV infection in the CIN I/II and CIN III/ICC groups were 68.0% (17/25) and 80.4% (45/56), respectively. All patients and 138 local Japanese controls were analyzed for HLA-A, HLA-B, HLA-DRB1, and HLA-DQB1. For major histocompatibility complex (MHC) class II HLA-DRB1 alleles, the frequency of DRB1*0901 was significantly elevated in HPV 16–positive CIN III/ICC patients compared with controls (59.3% versus 29.7%, P= 0.0031, OR = 3.44). Similarly for the HLA-DQB1 alleles, a significant increase in the DQB1*03032 frequency was observed in HPV 16–positive CIN III/ICC patients compared with controls (59.3% versus 28.3%, P= 0.0018, OR = 3.69). In the analysis of the T-cell responses in the lesions, Fas ligand was detected at a decreased frequency in HPV 16–positive CIN III/ICC patients with the HLA-DRB1*0901–DQB1*03032 haplotype. The presence of helper T cell–specific messenger RNAs in the cervical lesions supports an association among MHC class II, helper T cells, the immune response to HPV, and the development of cervical carcinoma. Accordingly, a specific MHC class II haplotype, DRB1*0901–DQB1*03032, may be a risk factor for cervical carcinoma in the Japanese population.

Identification of marker genes distinguishing human periodontal ligament cells from human mesenchymal stem cells and human gingival fibroblasts

BACKGROUND AND OBJECTIVE

Molecular gene markers, which can distinguish human bone marrow mesenchymal stem cells from human fibroblasts, have recently been reported. Messenger RNA levels of tissue factor pathway inhibitor-2, major histocompatibility complex-DR-alpha, major histocompatibility complex-DR-beta, and neuroserpin are higher in human bone marrow mesenchymal stem cells than in human fibroblasts. However, human bone marrow mesenchymal stem cells express less apolipoprotein D mRNA than human fibroblasts. Periodontal ligament cells are a heterogeneous cell population including fibroblasts, mesenchymal stem cells, and progenitor cells of osteoblasts or cementoblasts. The use of molecular markers that distinguish human bone marrow mesenchymal stem cells from human fibroblasts may provide insight into the characteristics of human periodontal ligament cells. In this study, we compared the molecular markers of human periodontal ligament cells with those of human bone marrow mesenchymal stem cells and human gingival fibroblasts.

MATERIAL AND METHODS

The mRNA expression of the molecular gene markers was analyzed using real-time polymerase chain reaction. Statistical differences were determined with the two-sided Mann-Whitney U-test.

RESULTS

Messenger RNA levels of major histocompatibility complex-DR-alpha and major histocompatibility complex-DR-beta were lower and higher, respectively, in human periodontal ligament cells than in human bone marrow mesenchymal stem cells or human gingival fibroblasts. Human periodontal ligament cells showed the lowest apolipoprotein D mRNA levels among the three types of cells.

CONCLUSION

Human periodontal ligament cells may be distinguished from human bone marrow mesenchymal stem cells and human gingival fibroblasts by the genes for apolipoprotein D, major histocompatibility complex-DR-alpha, and major histocompatibility complex-DR-beta.

Prevalence of IgG diphtheria antitoxin in blood donors in Rio de Janeiro

The lack of information on the immunity of adults in Brazil against diphtheria prompted us to analyse sera from 234 blood donors aged 18-61 years (30.3% females and 69.7% males). IgG diphtheria antitoxin levels determined by means of an ELISA, validated by toxin neutralization test in Vero cells, showed that 30.7% (95% CI 25.0-37.1) of the population was fully protected (>or=1 IU/ml). The highest percentage of subjects fully protected was in the 31-40 years age group. Most of the subjects with uncertain or no protection (<1 IU/ml) were found in the 18-30 years age group (43.8%, OR 2.18, P=0.01). Antitoxin levels were not influenced by the increase in age. Males were more protected than females (80.5%, OR 0.44, P=0.01). The prevalence of 30% of individuals fully protected against diphtheria in blood donors in Rio de Janeiro supports the fact that immunity to diphtheria among healthy Brazilian adults is inadequate. To avoid diphtheria epidemics in the future the immunity among adults should be raised in the coming years.

The influence of organic load on the antimicrobial activity of different concentrations of NaOCl and chlorhexidine in vitro

AIM

To evaluate bacterial growth after contact with sodium hypochlorite (NaOCl; 1 and 5%) and chlorhexidine (CHX; 0.12, 0.5 and 1%) in vitro with or without the addition of organic material (bovine serum albumin (BSA) 0.5%).

METHODOLOGY

Bacterial samples (American Type Culture Collection (ATCC)) of Staphylococcus aureus, Enterococcus faecalis, Escherichia coli, Porphyromonas gingivalis and Fusobacterium nucleatum were kept in contact with each irrigating solution for varying intervals of time: immediately (t0), 5 min (t5), 15 min (t15) and 30 min (t30). Each test was repeated 10 times. In half of the specimens, 0.5% BSA was added as organic material in an attempt to simulate the organic tissue present in the root canal system. Bacterial growth under appropriate condition of incubation was evaluated and compared for each microorganism at all time intervals.

RESULTS

A 0.12% CHX solution did not eliminate E. faecalis at any time interval. One percent CHX eliminated all strains, as did both NaOCl concentrations. BSA did not interfere substantially with the antimicrobial activity of any of the irrigating solutions.

CONCLUSIONS

Under the condition of this study, a 0.12% CHX solution was ineffective at killing E. faecalis.

Effects of quercetin on the heat-induced cytotoxicity of prostate cancer cells

BACKGROUND

It has been demonstrated that prostate cancer cells are relatively sensitive to heat stress. We have reported that heat treatment at 43 degrees C increases the expression of heat shock protein 70 (hsp70) in prostate cancer cells, leading to apoptosis. Hsp70 is a protein that protects cells against heat damage. Cells with lower levels of hsp70 have been shown to have a higher sensitivity to heat stress. Therefore, downregulation of hsp70 is expected to enhance heat-induced inhibitory effects on cell growth. Quercetin has been reported to be an agent that inhibits hsp70 expression. The present study was undertaken to investigate the effects of quercetin and/or heat on the growth of prostate cancer cells in vitro.

METHODS

Three human prostate cancer cell lines were used: Lncap; PC-3; and JCA-1. The cells were treated with quercetin and/or heat. Alterations in the cell cycle and hsp70 expression were examined by means of flow cytometry (FCM). The apoptotic cells were detected by FCM using fluorescein isothiocyanate (FITC) labeled annexin V.

RESULTS

Treatment with quercetin alone resulted in an apparent decrease of hsp70-positive cells and an increase of subG1 cells in JCA-1 and LNcap cells. Quercetin inhibited an increase of hsp70 expression after heat treatment and increased the number of subG1 cells with lower levels of hsp70 in JCA-1 and LNcap cells. Quercetin was found to enhance heat-induced inhibitory effects on cell growth and heat-induced apoptosis in both JCA-1 and LNcap cells.

CONCLUSION

These results suggest that quercetin may enhance heat-induced cytotoxicity in prostate cancer cell lines through the inhibition of hsp70 production.

[Tumor markers for hepatocellular carcinoma]

The diagnosis of hepatocellular carcinoma (HCC) is based mainly on serological tumor markers, such as alpha-fetoprotein, L3% fraction thereof and PIVKA-II, and imaging modalities. These are not correlated but are complementary. Hence, a combination designed to take advantage of the characteristics of each needs to be worked out. First, it is necessary to identify the patients at high risk for developing HCC, such as those with chronic hepatitis or liver cirrhosis, and in the follow-up conduct regular check-ups for serological tumor markers. Those testing positive for any marker are at the highest risk for developing HCC, even when imaging fails to disclose any space-occupying lesions. Following these high-risk patients, in concert with imaging, enables accurate evaluation of the efficacy of therapies for HCC. Since serological tumor markers can signal the development of HCC earlier than any other laboratory test, they offer an excellent means of identifying relapsing HCC. Equally important in the management of patients with HCC are biological indicators for malignancy, selection of therapeutic interventions and prediction of the outcome.