A feasible approach for the treatment of waste computer casing plastic using subcritical to supercritical acetone: Statistical modelling and optimization

Electronic waste (e-waste) usage has increased tremendously with the rapid evolution of technologies. The accumulated e-waste has now emerged as one of the crucial concerns regarding environmental pollution and human health. Recycling e-waste is commonly focused on metal recovery; nevertheless, a significant fraction of plastics (20-30%) are in e-waste. There is an indispensable need to focus on e-waste plastic recycling in an effective way, which has been mostly overlooked to date. An environmentally safe and efficient study is conducted using subcritical to supercritical acetone (SCA) to degrade the real waste computer casing plastics (WCCP) in the central composite design (CCD) of response surface methodology (RSM) to achieve the maximum oil yield of the product. The experiment parameters were varied in the temperature span of 150-300 °C, residence time between 30 and 120 min, solid/liquid ratio between 0.02 and 0.05 (g/ml), and NaOH amount from 0 to 0.5 g. Adding NaOH into the acetone helps to achieve efficient degradation and debromination efficiency. The study emphasized the attributes of oils and solid products recovered from the SCA-treated WCCP. The characterization of feed and formed products is performed with different characterization techniques such as TGA, CHNS, ICP-MS, FTIR, GC-MS, Bomb calorimeter, XRF, and FESEM. The highest oil yield achieved is 87.89% from the SCA process at 300 °C, in 120min, 0.05 S/L ratio, and 0.5 g of NaOH. GC-MS results disclose that the liquid product (oil) comprises single- and duplicate-ringed aromatic and oxygen-containing compounds. Isophorone is the significant component of the liquid product obtained. Furthermore, SCA's possible polymer degradation mechanistic route, bromine distribution, economic feasibility, and environmental aspect were also explored. This present work represents an environmentally friendly and promising approach for recycling the plastic fraction of e-waste and recovering valuable chemicals from WCCP.

A sustainable approach for material and metal recovery from E-waste using subcritical to supercritical methanol

The heterogeneous nature of e-waste, which is a rich source of metals, polymers, glass fibres and ceramics, is troublesome. Multi-step processes are employed to effectively treat e-waste with minimum environmental impact. In this research, a subcritical to supercritical methanol environment was investigated to pre-treat e-waste, recovering non-metallic fractions and eventually concentrate metals from e-waste. Experiments were conducted in the temperature range of 150 °C to 300 °C at an autogenous pressure with initial atmospheric pressure. The mechanism of depolymerization was investigated by varying reaction time from 30 min to 240 min; solid to liquid ratio of 1:10 to 1:30 g/ml in a batch reactor under N₂ environment. Comparative analysis of liquid products obtained after Supercritical Methanol (SCM) treatment for both Waste Random Access Memory (WRAM) and Waste Printed Circuit Board (WPCB) was done with pyrolyzed oil/liquid product. This research briefly illustrates oil and solid product compositional changes with operating temperature, pressure, and solid/liquid ratio range. The metal concentrations of copper, nickel, silver, zinc, and gold are greater than 90% after SCM treatment. For comparison, the feed material was pyrolyzed under the same condition, the difference in oil and solid products are assessed. In the end section, the environmental and economic benefits of SCM were also discussed compared to other supercritical and conventional technologies. An efficient and greener approach of supercritical solvent is proposed via this research for e-waste recycling.

Turmeric Oil: Composition, Extraction, Potential Health Benefits and Other Useful Applications

The turmeric essential oil of Curcuma species has extensively more useful properties due to its rich phytochemical profile. The concentration of volatile chemical constituents varies according to their type of applied plant part (i.e., root, rhizome, leaves, and flower) for extraction and type of the adopted extraction method. Novel extraction and purification methods, subcritical CO2 , supercritical CO2 , pressurized liquid extraction, and molecular distillation are found to be more efficient for good recovery of this volatile oil, along with increased concentrations of specified compounds. Not only have the curcuminoid compounds had a broad potential in the field of pharmacology but also the turmeric oil is found to have great applicability in treating several diseases and disorders. Turmeric oil possesses good antioxidant, antimicrobial, anticancer, anti-hyperlipidemic anti-inflammatory, anti-diabetic, and hepato-protective properties. Apart from medicinal fields, this oil has also a great future in the cosmetics, pesticide, and food industries due to its rich chemical profile. The present review focuses on providing information about turmeric oil in terms of its physicochemical properties, chemical composition, and available traditional extraction techniques, as well as available novel extraction options, actual health benefits, and other useful applications. It is hoped that the reported information is helpful for further discovery in the area of food, pharmaceutical, and cosmeceutical applications.

Controlling liquid hydrocarbon composition in valorization of plastic waste via tuning zeolite framework and SiO2/Al2O3 ratio

Abundance of plastic waste has become threat to the mankind and aquatic life and thus needs to be recycled or converted into value added products. Liquefaction of waste plastics via catalytic cracking is one the efficient routes towards plastic waste management. Concerning this, in present study, conversion of polymer mixture containing polypropylene, low-density polyethylene and high-density polyethylene (PP, LDPE and HDPE) was done for the production of gasoline and diesel range hydrocarbons using two-step cracking approach. MWW and MFI (12 and 10 member ring structures respectively) type zeolites having different pore structure and acidity were used for catalytic cracking of polymer feed at 350 °C. Investigations revealed that MWW type zeolite having two independent pore channels selectively provides gasoline range of hydrocarbons (C₇-C₁₂, 99.12%) in polymer cracking reaction as compared to MFI type which results in C₁₃-C₂₀ range of hydrocarbons (73.19%). Hydrocarbon compositions were confirmed from GC-MS, ¹H, ¹³C NMR and FT-IR techniques. In activity results it was observed that acidity of zeolites affects the liquid yield and hydrocarbon distribution as analysed by using zeolites of two different SiO₂/Al₂O₃ (SAR) ratio (30 and 55) which directs that zeolite (MFI/MWW) with lower SAR (30) having higher acidity results in higher yield of fuel range liquid hydrocarbons as compared to higher SAR (55) zeolite. Characterization studies such as XRD, N₂-physisorption, NH₃-TPD, FE-SEM and EDX were performed to check the physiochemical properties of zeolite and correlated with the activity. Overall, the present investigation provides detailed comparative study on plastic degradation using MFI and MWW type zeolites resulting into different range of liquid hydrocarbons.

High quality liquid fuel production from waste plastics via two-step cracking route in a bottom-up approach using bi-functional Fe/HZSM-5 catalyst

Plastic waste is a serious menace to the world due to its fastest growth rate of ~ 5% per annum and requires efficient technologies for its safe disposal. Plastic liquefaction producing liquid hydrocarbons is an effective way to dispose waste plastics in an eco-friendly manner. In present study, high quality liquid fuel is produced from waste plastics via two-step bottom-up cracking approach. A comparative analysis of liquid products obtained in thermal and catalytic cracking performed at relatively lower temperature (350 °C) with minimal catalyst to plastic feed ratio (1:30) has been studied. Catalytic cracking via two-step bottom-up route provides higher fraction of fuel range hydrocarbons in comparison to the thermal cracking. Catalytic cracking is performed using two different catalysts; HZSM-5 and 5%Fe/HZSM-5 in which later results in higher liquid yield (76 wt%) than former (60 wt%) having comparable fuel characteristics. GC-MS results confirm that liquid product obtained via catalytic cracking contains higher fraction of fuel range hydrocarbons (C₆-C₂₀); 66.39% for 5%Fe/HZSM-5 and 47.33% for HZSM-5 which is comparatively higher than that obtained in thermal cracking (27.39%). FT-IR, ¹H and ¹³C NMR spectroscopic studies confirm that liquid hydrocarbons obtained via catalytic cracking have comparable chemical characteristics with fuel range hydrocarbons. Physiochemical properties of catalysts are studied using XRD, XPS, BET, FE-SEM, HR-TEM, NH₃-TPD and H₂-TPR techniques and correlated with activity results. Analysis of commercial diesel fuel is also incorporated to compare the fuel characteristics of liquid products.

Improvements in makkhan (traditional Indian cultured butter) production: a review

Since Vedic times, traditional Indian cultured butter or makkhan has been one of the most demanding and extensively used food items in the village households of Indian subcontinent. Its processing and overall quality suffers due to the use of conventional practices, which has probably discouraged the production of product in organized sectors. No scientific intervention has taken place to improve the product quality and process since the inception of makkhan making. As an initiative towards the improvement, the present study is focused to prepare a detail scientific background on chemistry, quality attributes, utilization, preparation methods, and storage of product for identifying challenges and scopes of overall improvement in production status. To validate the opportunities identified for the improvements in production various approaches especially mechanized approaches are suggested in this review.

Assessment of 3D printability of composite dairy matrix by correlating with its rheological properties

In this study, the potential of heat desiccated milk powder (HDMP) in a composite dairy matrix with semi skimmed milk powder (SSMP) was assessed for hot melt extrusion-based 3D printing. The rheological characteristics of formulations at three stages i.e., pre-printing, printing, and post-printing were investigated. The shear thinning with rapid shear recovery and thermoresponsive behavior of the formulations were analyzed to mimic the prevailing conditions of pre-processing, processing, and post-processing of formulations to understand the temperature induced variations in their rheological characteristics during each stage. The rheological properties were correlated with printability through assessment of the consistency of straight lines (1D), average area of lattice scaffolds (2D), and dimensional stability of the 3D printed constructs. Results demonstrated that an increase in the level of incorporation of SSMP and a decrease in the proportion of HDMP increased the shear thinning behavior, viscosity (ɳ), yield stress (τ₀), storage modulus (G') and a decline in the shear recoverability of the formulations. The thermoresponsive behavior of the formulations was established with gelation temperature ranging from 28.1 to 29.4˚C. The formulation SSMP (35): HDMP (25) resulted in sagging of the printed constructs, whereas the formulation SSMP (55): HDMP (5.0) exhibited the highest dimensional stability and shape retention post printing, owing to its maximum τ₀ (1211.8 Pa) and G' (7026.4 Pa). The results obtained could provide insight into improving the performance of an HME based 3D printing in the dairy and food industries.

Eco-friendly recovery of metals from waste mobile printed circuit boards using low temperature roasting

The substantial growth of electronic waste (e-waste) in recent years has become a serious threat to environment. However, there is an excellent opportunity to recover and reuse metals present in e-waste, which eventually leads to conservation of natural resources for future generation. A greener and sustainable approach for the recovery of metals from electronic waste is the need of the hour. In this study, thermal decomposition of printed circuit boards (PCBs) was carried out in presence of nitrogen for conversion of polymers into oil and combustible gases. The metal rich pyrolysis residue was roasted in presence of ammonia chloride as chlorinating agent to recover metals. The effect of roasting parameters on the metal recovery investigated in temperature range of 200 °C to 325 °C for 1 h to 5 h while the NH₄Cl dosage varied from 1 g/g to 4 g/g. Under the optimized roasting conditions, around 93% Cu, 100% Ni, 100% Zn, and 100% Pb were recovered at temperature of 300 °C, time of 4 h and NH₄Cl dose of 3 g/g. The present process provides an eco-friendly solution for the recovery of metals from e-waste, which are valuable and avoid pollution.

Utilization and re-use of solid and liquid waste generated from the natural indigo dye production process - A zero waste approach

The main aim of this work is focused towards possible reuse of both solid and liquid waste generated from the natural indigo dye production process. The solid waste (C/N:15.01) was utilized to produce stable compost with possible re-use in Indigofera cultivation. Among seven compost combinations (C1-C7) using jeevamrutha (JA) and cow-dung (CD) as inoculum, C4 with 8% JA showed higher biomass degradation (51%) and plant growth potential (GI > 125%). Whereas the undiluted liquid waste was treated using algal consortia, bacteria, and indigenous microbial population, achieved a maximum removal of 90% ammonia, 82% nitrate, and 88% phosphorus for its re-use in the dye production process. Hence, incorporation of suitable waste management strategies in natural indigo dye production could help to achieve a zero waste sustainable process.

A quinoline alkaloid rich Quisqualis indica floral extract enhances the bioactivity

A volatile alkaloid quinoline-4-carbonitrile (QCN) was isolated from the floral extract of Quisqualis indica. Major compounds were trans-linalool oxide (1.0, 4.5%), methyl benzoate (1.0, 4.0%), 2,2,6-trimethyl-6-vinyl-tetrahydropyran-3-one (7.4, 17.8%), 2,2,6-trimethyl-6-vinyl-tetrahydropyran-3-ol (1.0, 1.2%), (E,E)-α-farnesene (29.1, 16.1%), QCN (5.7, 1.3%) in live and picked flowers, respectively. Flower compositions were altered due to change in enzymatic reaction at the time of picking. Some rearrangements of oxygenated terpenoids occurred in the process of hydrodistillation to obtain essential oil. Chemical synthesis of QCN and its selectively reduced products derived from QCN were prepared through green reaction process. The catalytic modification of QCN has produced quinoline-4-methylamine; the later compound has shown enhanced bio-activities. QCN and floral extract (absolute) have shown potential anti-inflammatory and antioxidant activities. Besides, floral absolute has shown significant anti-inflammatory and antioxidant activities due to improved QCN (19.7%) content to synergize amongst terpenoids and benzenoids as compared to the essential oil with 1.1% of QCN.

Chitosan-acrylate nanogel for durable anti mosquito finishing of cotton fabric and its dermal toxicity profiling on Swiss albino mice

Chitosan nanocapsules, containing lemongrass (Cymbopogon citratus) oil (LGO), have been developed in gel form in which acrylate (Ac) was incorporated as a thickener and fabric binder. The gel was impregnated on fabric to achieve long-lasting and wash-durable mosquito repellency. The interaction between cotton fibers and gel was investigated by FTIR and XRD. Wash durability of gel was compared with chitosan nanocapsules without acrylate (LGO-encap) using SEM and GC-MS. The SEM analyses revealed that acrylate containing nanocapsules retains on fabric after a series of washing. The GC-MS results indicated that the relative amount of deducible oil components from fabric was found to be higher after the series of washing in acrylate containing nanocapsules (LGO-encap-Ac), which further points to the improved wash durability and retention of capsules on fabric. The bio-efficacy results of post-fifteen washing turned out was 75% of repellency against mosquitoes with the use of acrylate; while in nanocapsules without acrylate, only 51% of repellency was achieved. Furthermore, the 36 days repeated application of nanogel on Swiss albino mice did not show any signs of dermal toxicity. The formulation is, thus, suitable to impregnate dress of the military personals and individuals who have to perform field duty and where risk of mosquito bites is probably more.

Efficacy of ureolytic Enterobacter cloacae EMB19 mediated calcite precipitation in remediation of Zn (II)

In this study, urease mediated calcite precipitation technique was used for remediation of Zn (II). A urease positive Enterobacter cloacae EMB19 was used to produce calcite impregnated with Zn ions. In co-presence of Ca (II), Zn (II) concentrations of 10 and 20 mg L^-1 were completely remediated by the bacterium from the media at 72 and 96 h of incubation, respectively. Co-precipitation of Ca (II) and Zn (II) to form calcite-Zn precipitate is one of the major mechanisms of Zn remediation in the present study. Role of urease in calcite-Zn precipitation was substantiated by using urease/carbonate and ammonium enriched cell free culture supernatant (CFS) obtained after sufficient microbial growth. Using CFS, 68% removal of initial 50 mg L^-1 Zn (II) was detected. Energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction pattern (XRD) of the precipitate supports calcite mediated remediation of Zn. Remediation of multiple metals viz. Cd, Zn, Cu was also analyzed using CFS laden with urease. The preparation showed 40% Cd, 23% Zn, and 8% Cu reduction from the solution containing initial 25 mg L^-1 of each metal. Overall, it can be concluded that, the E. cloacae mediated calcite precipitation technique could effectively be used for alleviation of Zn (II) and other heavy metals from the contaminated environment.

Temperature dependent steady and dynamic oscillatory shear rheological characteristics of Indian cow milk (Desi) ghee

Rheological characteristics of Desi ghee were investigated at 18, 24, 30 and 36 °C. The steady shear properties were evaluated by varying the shear rate from 0.01 to 100 s^-1 and the dynamic shear properties were studied by varying strain and frequency sweep from 0.01 to 100% and 0.1 to 100 rad s^-1, respectively. At the four selected temperatures, the ghee samples displayed non-Newtonian shear thinning behavior with flow behavior index (n) ranging from 0.224 to 0.911. As the shear rate increased from 0 to 100 s^-1, the values of dynamic viscosity decreased from 54 to 8.14, 20.01 to 1.05, 1.33 to 0.295, and 3.02 to 0.0025 Pa s at 18, 24, 30 and 36 °C, respectively. Out of four rheological models (Power-law or Ostwald-de Waele, Herschel-Bulkley, Casson, and Bingham model) fitted to the shear rate and stress data, the Ostwald model was found to be superior in predicting the shear rate-stress data at 18 °C, whereas Ostwald-de Waele and Herschel-Bulkley models predicted all the data points over the temperature range of 24-30 °C, as observed by the values of coefficient of determination (R² ), standard deviation (SD), and relative deviation percentage (R_d ). The value of activation energy (E_A ), as calculated from Arrhenius type equation, was found to be 1.98 × 10⁶ kJ mol^-1 over the entire temperature range. The study also revealed that the magnitudes of dynamic shear viscosity (η*) were higher than those of the steady shear viscosity (η) at the four temperatures, indicating that the Cox-Merz rule was not applicable to the ghee samples.

Harnessing the bio-mineralization ability of urease producing Serratia marcescens and Enterobacter cloacae EMB19 for remediation of heavy metal cadmium (II)

In the present study, urease positive Serratia marcescens (NCIM2919) and Enterobacter cloacae EMB19 (MTCC10649) were individually evaluated for remediation of cadmium (II) using ureolysis-induced calcium carbonate precipitation. Both the cultures were observed to efficiently remove cadmium from the media through co-precipitation of Cd (II) and Ca (II). S. marcescens and E. cloacae EMB19, respectively showed 96 and 98% removal of initial 5.0 mg L^-1 soluble Cd (II) from the urea and CaCl₂ laden media at 96 h of incubation period. At higher Cd (II) concentrations of 10 and 15 mg L^-1, cadmium removal efficiency was much higher in case of E. cloacae EMB19 compared to S. marcescens. In-vitro cadmium (II) remediation study using urease containing cell-free culture supernatant of S. marcescens and E. cloacae EMB19 showed respective 98 and 53% removal of initial 50 mg L^-1 Cd (II) from the reaction mixtures in co-presence of Ca (II). While in sole presence of Cd (II), only 16 and 8% removal of Cd (II) were detected for S. marcescens and E. cloacae EMB19, respectively. The elemental analysis of the co-precipitated mineral products using Energy Dispersive X-ray spectroscopy (EDX) clearly showed the prevalence of Ca and Cd ions. The morphology Cd-Ca composites formed with respect to both the cultures were observed to be of different shape and size as revealed through Scanning Electron Microscopy (SEM). Entire study hence comes out with a sustainable bioremediation option which could be effectively used to tackle Cd (II) or other heavy metal pollution.

Climate change impact of livestock CH4 emission in India: Global temperature change potential (GTP) and surface temperature response

Two climate metrics, Global surface Temperature Change Potential (GTP) and the Absolute GTP (AGTP) are used for studying the global surface temperature impact of CH₄ emission from livestock in India. The impact on global surface temperature is estimated for 20 and 100 year time frames due to CH₄ emission. The results show that the CH₄ emission from livestock, worked out to 15.3 Tg in 2012. In terms of climate metrics GTP of livestock-related CH₄ emission in India in 2012 were 1030 Tg CO₂e (GTP₂₀) and 62 Tg CO₂e (GTP₁₀₀) at the 20 and 100 year time horizon, respectively. The study also illustrates that livestock-related CH₄ emissions in India can cause a surface temperature increase of up to 0.7mK and 0.036mK over the 20 and 100 year time periods, respectively. The surface temperature response to a year of Indian livestock emission peaks at 0.9mK in the year 2021 (9 years after the time of emission). The AGTP gives important information in terms of temperature change due to annual CH₄ emissions, which is useful when comparing policies that address multiple gases.

Evidence for the involvement of nematocidal toxins of Purpureocillium lilacinum 6029 cultured on Karanja deoiled cake liquid medium

In present study, in vitro nematocidal bioassays, FT-IR and HPLC analysis were employed to demonstrate the involvement of toxins of Purpureocillium lilacinum in killing root-knot nematodes (Meloidogyne incognita). During growth study, maximum mycelial biomass (10.52 g/l) in de-oiled Karanja cake medium was achieved on 8th day while complete mortality of nematodes was obtained by 6th day filtrate (FKSM). Maximum production of crude nematocidal toxin was recorded on 7th day suggesting that the toxin production was paralleled with growth of the fungus. The median lethal concentration (LC50) determined for the crude toxin from 6th day to 10th day ranged from 89.41 to 43.21 ppm. The median lethal time (LT50) for the crude toxin of FKSM was found to be 1.46 h. This is the first report of implementing a comparative infra-red spectroscopy coupled with HPLC analysis to predict the presence of nematocidal toxin in the fungal filtrate cultured on Karanja deoiled cake liquid medium.

Utilization of biodiesel by-products for mosquito control

The current paper has elaborated the efficient utilization of non-edible oil seed cakes (NEOC), by-products of the bio-diesel extraction process to develop a herbal and novel mosquitocidal composition against the Aedes aegypti larvae. The composition consisted of botanical active ingredients, inerts, burning agents and preservatives; where the botanical active ingredients were karanja (Pongamia glabra) cake powder and jatropha (Jatropha curcas) cake powder, products left after the extraction of oil from karanja and jatropha seed. The percentage mortality value recorded for the combination with concentration, karanja cake powder (20%) and jatropha cake powder (20%), 1:1 was 96%. The coil formulations developed from these biodiesel by-products are of low cost, environmentally friendly and are less toxic than the synthetic active ingredients.

Experimental assessment of toxic phytochemicals in Jatropha curcas: oil, cake, bio-diesel and glycerol

BACKGROUND

Jatropha curcas seed is a rich source of oil; however, it can not be utilised for nutritional purposes due to presence of toxic and anti-nutritive compounds. The main objective of the present study was to quantify the toxic phytochemicals present in Indian J. curcas (oil, cake, bio-diesel and glycerol).

RESULTS

The amount of phorbol esters is greater in solvent extracted oil (2.8 g kg⁻¹) than in expeller oil (2.1 g kg⁻¹). Liquid chromatography-mass spectroscopy analysis of the purified compound from an active extract of oil confirmed the presence of phorbol esters. Similarly, the phorbol esters content is greater in solvent extracted cake (1.1 g kg⁻¹) than in cake after being expelled (0.8 g kg⁻¹). The phytate and trypsin inhibitory activity of the cake was found to be 98 g kg⁻¹ and 8347 TIU g⁻¹ of cake, respectively. Identification of curcin was achieved by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and the concentration of curcin was 0.95 g L⁻¹ of crude concentrate obtained from cake.

CONCLUSION

Higher amounts of phorbol esters are present in oil than cake but bio-diesel and glycerol are free of phorbol esters. The other anti-nutritional components such as trypsin inhibitors, phytates and curcin are present in cake, so the cake should be detoxified before being used for animal feed.

Double-blinded randomized controlled trial for immunomodulatory effects of Tulsi (Ocimum sanctum Linn.) leaf extract on healthy volunteers

ETHNOPHARMACOLOGICAL RELEVANCE

Tulsi (Ocimum sanctum Linn.) is considered as a sacred herb and traditionally it is believed that consumption of Tulsi leaf on empty stomach increases immunity. Experimental studies have shown that alcoholic extract of Tulsi modulates immunity.

MATERIALS AND METHODS

The present study was designed to evaluate the immunomodulatory effects of ethanolic extract of Tulsi leaves through a double-blinded randomized controlled cross-over trial on healthy volunteers. Three hundred milligrams capsules of ethanolic extracts of leaves of Tulsi or placebo were administered to 24 healthy volunteers on empty stomach and the results of 22 subjects who completed the study were analyzed. The primary objective was to study the levels of Th1 and Th2 cytokines (interferon-γ and interleukin-4) during both pre and post intervention period in blood culture supernatants following stimulation with lipopolysaccharide and phytohaemagglutinin. Other immunological parameters such as T-helper and T-cytotoxic cells, B-cells and NK-cells also were analyzed using Flowcytometry.

RESULTS

Statistically significant increase in the levels of IFN-γ (p=0.039), IL-4 (p=0.001) and percentages of T-helper cells (p=0.001) and NK-cells (p=0.017) were observed after 4 weeks in the Tulsi extract intervention group in contrast to the placebo group.

CONCLUSIONS

These observations clearly ascertain the immunomodulatory role of Tulsi leaves extract on healthy volunteers.

Chemical composition and larvicidal activities of the essential oil of Zanthoxylum armatum DC (Rutaceae) against three mosquito vectors

BACKGROUND & OBJECTIVES

In view of the recently increased interest in developing plant origin insecticides as an alternative to chemical insecticide, this study was undertaken to assess the larvicidal potential of the essential oil from the seeds of Zanthoxylum armatum DC [syn. Z. alatum Roxb] (Rutaceae) against three medically important species of mosquito vectors, Aedes aegypti, Anopheles stephensi and Culex quinquefasciatus.

METHODS

Essential oil was hydro distilled in the laboratory from the seeds obtained from the market and the chemical constituents of the oil were determined using GC/GC-MS. Bioefficacy of the essential oil was evaluated under laboratory conditions using III instar mosquito larvae.

RESULTS

Among the three mosquito species tested, Cx. quinquefasciatus was the most sensitive (LC50 = 49 ppm) followed by Ae. aegypti (LC50 = 54 ppm) and An. stephensi (LC50 = 58 ppm). GC-MS analysis of the oil revealed at least 28 compounds, consisting mainly of oxygenated monoterpenes (75%) and monoterpenes (22%). Linalool though constituted a major part (57%), failed to produce any appreciable mortality when tested alone.

INTERPRETATION & CONCLUSION

From the results it can be concluded that the larvae of the three mosquito species were susceptible to the essential oil composition. Such findings would be useful in promoting research aiming at the development of new agent for mosquito control based on bioactive chemical compounds from indigenous plant sources as an alternative to chemical larvicides.

Optimization of alkali-catalyzed transesterification of Pongamia pinnata oil for production of biodiesel

Studies were carried out on transesterification of Karanja oil with methanol for the production of biodiesel. The reaction parameters such as catalyst concentration, alcohol/oil molar ratio, temperature, and rate of mixing were optimized for production of Karanja oil methyl ester (KOME). The fatty acid methyl esters content in the reaction mixture were quantified by HPLC and 1H NMR method. The yield of methyl esters from Karanja oil under the optimal condition was 97-98%.

Larvicidal activity of Tagetes patula essential oil against three mosquito species

Larvicidal activity of Tagetes patula essential oil was tested against the fourth instar larvae of Aedes aegypti, Anopheles stephensi, and Culex quinquefaciatus. Five different concentrations of essential oil were studied and the results were compared with that of synthetic insecticide, malathion. A. aegypti (LC(50) 13.57, LC(90) 37.91) was most susceptible followed by An. stephensi (LC(50) 12.08, LC(90) 57.62) and C. quinquefaciatus (LC(50) 22.33, LC(90) 71.89).

Serum haptoglobin level in patients with malignant lymphoma and its clinical significance

Serum haptoglobin level and its phenotypes were studied in 208 normal people and 176 malignant lymphoma patients consisting of 112 Non-Hodgkin's Lymphoma (NHL) and 64 Hodgkin's Disease (HD) at Tata Memorial Hospital, Bombay and were correlated with the clinical stages of the lymphomas. Haptoglobin (Hp) levels were also estimated in the patients at different intervals during their chemotherapy. Hp level was found significantly increased to 147.83 +/- 8.67 in NHL and 173.57 +/- 13.31 in HD as compared to 67.46 +/- 2.53 in the controls. The phenotypic and gene frequencies in the lymphoma patients did not differ significantly from those of the controls. All the clinical stages, except stage I, of NHL and HD revealed significant rise in Hp level when compared with the controls. When different clinical stages of NHL and HD were compared separately, HD showed significant rise in HP level over the NHL only in Stage IV (p less than 0.05). Significant reduction in Hp level was observed when the disease regressed due to chemotherapy but it again increased with the relapse of the disease. Thus, the study of serum haptoglobin levels at intervals in lymphoma patients would help to understand the regression or relapse of the disease and also the prognosis.

Glucose-6-phosphate dehydrogenase and 6-phosphogluconate dehydrogenase activities in normal canine mammary gland and in mammary tumours and their correlation with oestrogen receptors

Glucose-6-phosphate dehydrogenase (G-6-PD) and 6-phosphogluconate dehydrogenase (6-PGD) activities were studied in 10 normal canine mammary glands and in 19 canine mammary tumours, which included seven benign and 12 malignant neoplasms. The malignant tumours were also examined for oestradiol receptors. The mean G-6-PD and 6-PGD activities were 5.17 +/- 1.84 and 1.65 +/- 0.64 IU per g protein in normal glands, 8.8 +/- 2.7 and 3.8 +/- 0.99 IU per g protein in benign and 19.6 +/- 5.2 and 8.5 +/- 2.1 IU per g protein in malignant mammary tumours. The enzyme activities were significantly higher in tumour tissue than in normal glands. Malignant tumours had much greater activity than benign. With the increasing anaplasia, there was a corresponding rise in the activity of the two enzymes. There was an inverse correlation between the oestrogen receptor (ER) status and the enzyme activity. The ER-positive tumours had low and ER-negative tumours had high enzyme activities.

Comparative pathology of canine mammary tumours

The pathological features of 52 canine mammary tumours were studied and compared with those of human breast neoplasms. In many of the former, the constituent cells were both epithelial and myoepithelial. Cartilaginous and osseous metaplasia of the stromal tissue was striking in a few tumours. Carcinosarcomas were also encountered. On a careful search, virus-like particles were observed in five tumours. The similarities and differences between the human and canine mammary tumours were discussed with a view to assessing the suitability of dog mammary tumour as an animal model for human breast tumours.

Receptors for epidermal growth factor and estradiol in canine mammary tumors

Both growth factors and steroid hormones are known to be associated with breast cancer. We have studied the epidermal growth factor receptor (EGFR) in canine mammary tumors and have shown the presence of a single class of 125I-EGF binding receptor sites in 9 out of 13 (70%) tumors, using Scatchard plot. The dissociation constant (KD) was 10(-9)M. An inverse correlation between EGFR and estrogen receptor (ER) was observed in 54% of the tumors. Our data suggest that EGFR might be used as a biochemical marker in canine mammary tumors.

A new glucose-6-phosphate dehydrogenase variant (G-6-PD Kalyan) found in a Koli family

A new Indian variant of erythrocytic glucose-6-phosphate dehydrogenase (G-6-PD) has been detected in a Koli male subject during population genetic studies. The enzyme variant is characterized by mild enzyme deficiency, slow electrophoretic mobility, low Km for G-6-P, increased utilization of substrate analogues, heat instability and a normal pH optimum curve. From these results this was considered to be a new variant and was designated G-6-PD Kalyan. The family history and routine hematological studies did not reveal any evidence that the G-6-PD Kalyan is associated with any hematological abnormalities or clinical symptoms.

Haemoglobin variants in mice

Haemoglobin variants were studied in wild and laboratory house mice (Mus musculus), including standard and new inbred strains, using starch-gel electrophoretic technique. Single (Hbbs) or diffuse (Hbbd) types of haemoglobin were found in all of them. The embryonic haemoglobin pattern was different from although similar to that of the adult in all the strains. The haemoglobins revealed monomorphism in the inbred strains, while polymorphism was observed in non-inbred laboratory and wild mice.