Occurrence and characteristics of microplastics in greywater from a research vessel

The discharge of greywater from ships, an uncounted sea-based source of microplastics (MPs), is a growing concern. Yet, empirical data on MPs from this source are currently limited. Here, the abundances and characteristics of MPs in greywater from a research vessel were investigated according to water usage type (e.g., galley, cabin, and laundry). The mean abundance of MPs was highest in greywater from the laundry (177,667 n/m3), followed by the cabins (133,833 n/m3) and galley (75,000 n/m3). However, no significant differences were found in the MP abundances among greywater types due to high variability of triplicate samples collected every five days. Fiber-type MPs accounted for 66% of the total MP abundance and fragment-type MPs for 34%. Microplastics in the size range of 100-200 μm exhibited the highest levels among size classes. The dominant polymer identified in all greywater samples was polyester (53%), followed by polypropylene (23%). Marine coating origin MPs (6%) were also observed in all types of greywater. The greywater generation rate during the cruise was 0.15 m3/person∙day. Annual MP emissions per person by the greywater discharge of the research vessel was estimated to be 4.1 × 106 n/person∙year (equivalent to 3.0 g/person∙year).

Spatial distribution and historical trend of microplastic pollution in sediments from enclosed bays of South Korea

Seafloor sediments are an important sink for microplastics (MPs), and the vertical profile of MP accumulation in a sediment core represents historical pollution trends. In this study, MP (20-5000 μm) pollution in surface sediments of urban, aquaculture, and environmental preservation sites in South Korea was evaluated, and the historical trend was investigated using age-dated core sediments from the urban and aquaculture sites. The abundance of MPs ranked in the order of urban, aquaculture, and environmental preservation sites. Polymer types were more diverse at the urban site compared to other sites, and expanded polystyrene was dominant in the aquaculture site. An increase in MP pollution and polymer types was observed from bottom to top of cores, and historical trends of MP pollution reflect local influences. Our results indicate that the characteristics of MPs are determined by human activities, and MP pollution should be addressed according to the characteristics of each site.

Fragmentation of nano- and microplastics from virgin- and additive-containing polypropylene by accelerated photooxidation

Plastic is ubiquitous in the environment, where it gradually weathers and fragments into nanoplastics (NPs) and microplastics (MPs); however, the weathering process and fragmentation rate are poorly understood. In this study, we quantitatively determined the abundances and size distributions of NPs and MPs produced from virgin polypropylene (PP) and additive-containing PP (PPa) sheets via photooxidation with water in a simulated sunlight chamber followed by vortexing. The fragmentation rate of PP and PPa were approximately 1.1 × 108 particles/cm2 and 1.0 × 108 particles/cm2, respectively, during 176 days of exposure in the chamber (corresponding to 2.7 years of exposure in an outdoor environment in the Republic of Korea). However, quadratic regression analysis of the relationship between total particles produced and exposure duration revealed that the PP fragmentation rate was faster than the PPa fragmentation rate after a sunlight exposure duration equivalent to 2.7 years. Furthermore, the mechanical stress of vortexing after photooxidation played an important role in the production of MPs; it had a smaller role in the production of NPs. The sizes of fragmented particles produced by photooxidation and mechanical stress followed a power law distribution, with a scaling exponent of α = 2.87 ± 0.15, which was similar to a three-dimensional fragmentation pattern. This study provides valuable insights into the weathering and fragmentation processes of plastics. Further studies on the environmental fate and impact of NP and MP production from plastic weathering and fragmentation, as well as the potential influence of plastic additives on these processes.

Toward a long-term monitoring program for seawater plastic pollution in the north Pacific Ocean: Review and global comparison

Through a literature survey and meta-data analysis, monitoring methods and contamination levels of marine micro- and macroplastics in seawater were compared between the North Pacific and the world's other ocean basins. The minimum cut-off size in sampling and/or analysis of microplastics was crucial to the comparison of monitoring data. The North Pacific was most actively monitored for microplastics and showed comparatively high levels in the global context, while the Mediterranean Sea was most frequently monitored for macroplastics. Of the 65 extracted mean abundances of microplastics in seawater from the North Pacific, two (3.1%) exceeded the lowest predicted no-effect concentration (PNEC) proposed thus far. However, in the context of business-as-usual conditions, the PNEC exceedance probability may be expected to reach 27.7% in the North Pacific in 2100. The abundance of marine plastics in seawater, which reflects the current pollution status and marine organisms' waterborne exposure levels, is a useful indicator for marine plastic pollution. For regional and global assessments of pollution status across space and time, as well as assessment of ecological risk, two microplastic monitoring approaches are recommended along with their key aspects. Although microplastic pollution is closely linked with macroplastics, the monitoring data available for floating macroplastics and more extent to mesoplastics in most ocean basins are limited. A more specific framework for visual macroplastic survey (e.g. fixed minimum cut-off size, along with survey transect width and length according to survey vessel class) is required to facilitate data comparison. With the implementation of standardised methods, increased efforts are required to gather monitoring data for microplastics and-more importantly-floating macroplastics in seawater worldwide.

The fragmentation of nano- and microplastic particles from thermoplastics accelerated by simulated-sunlight-mediated photooxidation

The plastic debris that washes ashore and litters the shoreline often undergoes weathering under sunlight exposure, such that it fragments to form nanoplastics and microplastics, but the fragmentation rate for many thermoplastics is unknown. In this study, three major thermoplastics were exposed to simulated sunlight in an accelerated weathering chamber to evaluate the speed of photooxidation-induced fragmentation. The initiation of photooxidation-induced fragmentation extrapolated from the accelerated weathering chamber to real sunlight exposure in South Korea followed the order of PS (< 1 year) > PP (< 2 years) > LDPE (> 3 years). The surface cracks created by photooxidation were not directly reflected in the initiation of fragmentation of thermoplastics. The initiation of fragmentation was faster in PS than other polymers, but the total abundance of particles produced, and increasing ratio (exposure/non-exposure) were comparable or lower than those of PP. The increasing ratio pattern between nanoplastics and small microplastics of PP differed noticeably from other polymers. The initiation of nanoplastic and small-microplastic fragmentation determined in this study will be useful for the further estimation of secondary microplastic production by weathering and thus for decision-making regarding methods for the timely removal of plastic litter in the environment.

Underwater hidden microplastic hotspots: Historical ocean dumping sites

Three ocean dumping sites located in the Yellow Sea (YS) and East Sea (ES) of South Korea have accumulated terrestrial waste from 1988 to 2015. Most of this waste comprised industrial wastewater and sewage sludge, which are sources of microplastics. In this study, we investigated the spatiotemporal distribution and characteristics of microplastics in surface and core sediments of the YS, South Sea (SS) and ES, including at dumping sites (YDP and EDP). The mean abundance of microplastics in surface sediments was ranked in order of EDP (59,457 ± 49,130 particles/kg d.w.), ES (5,047 ± 9,404 particles/kg d.w.), YDP (3,965 ± 3,213 particles/kg d.w.), SS (314 ± 488 particles/kg d.w.) and YS (288 ± 400 particles/kg d.w.). EDP and YDP showed about 14- and 12-fold higher microplastic abundances, and more diverse polymer compositions, than the ES and YS, respectively. The historical trend of microplastic pollution in age-dated core sediments from EDP and YDP aligned well with the amount of historical ocean dumping. As the level of ocean dumping has gradually reduced since 2006, and was finally banned in 2015, the microplastic abundance decreased accordingly. Interestingly, spherical polystyrene (PS) primary microplastic was the dominant type in EDP sediments (78%) and other surface sediments in the ES (52%). More than 60 million tons of sewage and wastewater sludge were dumped at EDP, and extremely high abundances of up to 130,000 particles/kg d.w. were observed in EDP surface sediments. PS primary microplastics were continuously present in the EDP and ES sediment cores in the dumping period and are suspected to have originated from industrial wastewater sludge. The particle transportation model results showed that PS was dispersed throughout the ES during ocean dumping. In addition, deep circulation can contribute to the dispersion of particles after sinking. These results indicate that ocean dumping sites represent an underwater hotspot and source of microplastics in seafloor sediments.

A comparison of spectroscopic analysis methods for microplastics: Manual, semi-automated, and automated Fourier transform infrared and Raman techniques

This study was conducted to establish the best practice for microplastic analysis by reducing the time demand and human bias and comparing the characteristics of μ-FTIR and Raman techniques. A manual analysis, semi-automated method, and fully automatic identification method were compared. Fully automated identification took the shortest time to analyze a whole filter paper (Ø25 mm), but its false positive identification rate was 80 ± 15%. The semi-automated analysis using spectrum profiling was suitable for all aspects of microplastic analysis. It was less time consuming than the manual analysis (manual: 6.1 ± 0.8 h, semi-automated: 4.0 ± 0.6 h), and 22 ± 12% more microplastic particles were detected using the semi-automated method compared to the manual analysis due to the reduction in false negative results. Raman microscopy was suitable for small microplastic (>5 μm) identification, although the Raman analysis took nine times longer than the semi-automated analysis.

Prevalence of small high-density microplastics in the continental shelf and deep sea waters of East Asia

Microplastics are widely distributed throughout aquatic environments. Information about the vertical distribution and fate of microplastics in seawater remains limited. To elucidate the vertical distribution of microplastics, three to six vertical water column layers were sampled based on the thermocline depth, from which the vertical distribution and characteristics of microplastics larger than 20 μm were investigated in continental shelf and deep-sea waters around South Korea. In addition, microplastics incorporated into marine aggregates (aggregated fraction) were investigated to determine the contribution of aggregates to vertical transport of microplastics. The abundance of microplastics was in the range of 15-9,400 particles/m³. No consistent trend was observed in the overall vertical profiles. The size, shape and polymer compositions of microplastics at each station were generally comparable throughout the water column. Unexpectedly, high-density (HD; > 1.02 g/cm³) polymers accounted for an average of 73% of total microplastics. As polymer density increased, the proportion of microplastics less than 100 μm in size increased. HD polymers also accounted for 68% of the aerosol samples collected together with water samples. Due to the relatively high proportion of HD polymers in far-offshore waters, high-density solution should be used to extract microplastics, even from surface seawaters. The aggregated fraction accounted for 0-28.6% (average, 3.4%) of total microplastics. Marine aggregates are considered an important mechanism of transport for microplastics less dense than seawater to the deep-water column, but they showed lower proportions than expected in continental shelf and deep-sea waters around South Korea.

Ecological risk assessment of microplastics in coastal, shelf, and deep sea waters with a consideration of environmentally relevant size and shape

This study assessed the ecological risk posed by microplastics in surface and subsurface seawaters in coastal, continental shelf, and deep-sea areas of South Korea. The target microplastics for risk assessment were specified as only non-spherical type microplastics in the size range 20-300 μm, because this type was predominantly observed in our study areas, and adverse biological effects have previously been reported. Exposure data for non-spherical microplastics were obtained from a previous study or were measured for microplastics of sizes down to 20 μm. A predicted no-effect concentration (PNEC) of 12 particles/L was derived by employing a species sensitivity distribution approach. Then the results were compared to the in situ observed concentrations at each site. The detected microplastic concentrations did not exceed the derived PNEC, i.e., the current pollution levels of fragment and fiber microplastics in the size range 20-300 μm would not pose a significant threat to the marine ecosystem in South Korea. However, predictions are that microplastic pollution will increase to 50-fold by 2100 at the current rates, and in this scenario, the microplastic concentration is expected to far exceed the derived PNEC values for marine ecosystems. It is therefore urgent to take precautionary actions to prevent a further increase in microplastic concentrations in these environments.

Rapid Production of Micro- and Nanoplastics by Fragmentation of Expanded Polystyrene Exposed to Sunlight

Expanded polystyrene (EPS) is a common plastic marine debris found in oceans worldwide. The unique "foamed" structure of EPS, which is composed of thin layers, is more vulnerable to fragmentation than bulk plastics. However, the production rate of micro- and nanoplastics by the fragmentation of EPS following sunlight exposure remains largely unknown. Here, we determined the fragmentation rate and weight loss of EPS in an outdoor weathering experiment that ran for 24 months. It took only 1 month for the weight of an EPS box to decline by 5% due to photodegradation, and approximately 6.7 × 10⁷ micro- and nanoparticles/cm² could be produced at a latitude of 34 °N. These results indicate that macro EPS debris can continually produce a massive number of particles within a relatively short exposure duration. The findings provide useful information to inform policymakers how rapidly to remove "likely fragmented" plastic litter from the environment.

Spatiotemporal distribution and annual load of microplastics in the Nakdong River, South Korea

Although rivers represent an important pathway for the transport of microplastics to the oceans, research on riverine microplastics is limited compared to the marine environment. Hence, we investigated the spatiotemporal distribution of microplastics in the Nakdong River down to 20 μm in size and characterized them using Fourier transform infrared spectroscopy in surface and mid waters and sediment. The mean (±standard deviation) abundance of microplastic in the Nakdong River was in the range of 293 ± 83 (upstream, February 2017) to 4760 ± 5242 (downstream, August 2017) particles/m³ in water, and 1970 ± 62 particles/kg in sediment. The abundance of microplastics was about three times higher in surface than mid waters in the downstream area. Polypropylene and polyester accounted for 41.8% and 23.1% of microplastics in the water, respectively, whereas about 50% in the sediment was composed of polypropylene and polyethylene. Microplastics smaller than 300 μm in size accounted for 74% in the water and 81% in sediment, and the distribution peaked in the 50-150 μm size range. Based on these results, we estimated the annual load of microplastics carried by the Nakdong River in 2017 to be 5.4-11 trillion by number and 53.3-118 tons by weight. The proportions of the total load transported through surface water and the water column were 8% and 92%, respectively. In addition, the microplastic load was concentrated in the wet season, which makes up 71% in number and 81% in weight. These results indicate that it is necessary to reflect seasonal variation and sample both in the surface water and water column to estimate microplastic transport. Without considering these factors, the annual load of microplastics may be overestimated or underestimated.

Horizontal and Vertical Distribution of Microplastics in Korean Coastal Waters

This is the first survey to investigate the vertical distribution and composition of microplastics >20 μm at the surface (0-0.2 m; bulk sample) and in the water column (3-58 m depth; pump) of six semi-enclosed bays and two nearshore areas of South Korea. The average microplastic abundance of 41 stations at all sampling depths was 871 particles/m³, and the microplastic abundance near urban areas (1051 particles/m³) was significantly higher than that near rural areas (560 particles/m³). Although the average microplastic abundances in the midcolumn (423 particles/m³) and bottom water (394 particles/m³) were approximately 4 times lower than that of surface water (1736 particles/m³), microplastics prevailed throughout the water column in concentrations of 10-2000 particles/m³. The average sizes of fragment and fiber type microplastics were 197 and 752 μm, respectively. Although the polymer composition differed by depth depending on the particle size and density, polypropylene and polyethylene predominated throughout the water column regardless of their low density and particle size. Finally, the middle and bottom water samples contained higher abundances of microplastics than predicted by a model based on physical mixing, indicating that biological interactions also influence the downward movement of low-density microplastics.

Abundance, composition, and distribution of microplastics larger than 20 μm in sand beaches of South Korea

To support microplastic management, the abundance, composition, and spatial distribution of microplastics on a national scale must be known. Hence, we studied the baseline level of microplastic pollution at 20 sandy beaches along the South Korean coast. All microplastic particles extracted from the sand samples were identified down to 20 μm in size using Fourier transform infrared spectroscopy. The abundances of large microplastics (L-MPs; 1-5 mm) and small microplastics (S-MPs; 0.02-1 mm) were in the range of 0-2088 n/m² and 1400-62800 n/m², respectively. Maximum microplastic abundance was in the size range of 100-150 μm, and particles smaller than 300 μm accounted for 81% of the total abundance. Expanded polystyrene (EPS) accounted for 95% of L-MPs, whereas S-MPs were predominantly composed of polyethylene (49%) and polypropylene (38%). The spatial distribution of L-MPs, excluding EPS, was significantly related to population, precipitation, proximity to a river mouth and abundance of macroplastic debris on beach. However, there were no relationships between S-MPs and other environmental and source-related factors, except for macroplastic debris and L-MPs excluding EPS. These results imply that S-MPs are mainly produced on beaches by weathering, whereas L-MPs other than EPS are mainly introduced from land-based sources and are also partly produced on beaches.

Characteristics of meso-sized plastic marine debris on 20 beaches in Korea

We surveyed the abundance and accumulation patterns of mesoplastic marine debris (5-25mm) on 20 beaches in Korea. The mean abundance of it was 13.2items/m², and the mean weight was 1.5g/m². Hard plastic and Styrofoam were the dominant types. The proportions of hard plastic and Styrofoam were highly variable among the beaches, each accounting for 0-100% of the total debris on a given beach with 32% and 48.5% (by number) on average, respectively. Relatively lower abundances of mesoplastic marine debris compared with our previous studies were likely due by differences of the sampling areas within the beach. The samples of this research were selected from backshore, middle line, and water edge whereas they were selected from high strandline and backshore in our previous studies. It should be considered when discussing the level of mesoplastic marine debris.

Major pharmaceutical residues in wastewater treatment plants and receiving waters in Bangkok, Thailand, and associated ecological risks

Pharmaceuticals have been frequently detected in aquatic environment worldwide and suspected for potential ecological consequences. However, occurrences, sources and potential risks of pharmaceutical residues have rarely been investigated in Bangkok, Thailand, one of most densely populated cities in the world. We collected water samples from five wastewater treatment plants (WWTPs), six canals, and in mainstream Chao Phraya River of Bangkok, in three sampling events representing different seasonal flow conditions, i.e., June and September 2011 and January 2012. Fourteen major pharmaceuticals including acetaminophen, acetylsalicylic acid, atenolol, caffeine, ciprofloxacin, diclofenac, ibuprofen, mefenamic acid, naproxen, roxithromycin, sulfamethazine, sulfamethoxazole, sulfathiazole and trimethoprim were analyzed. Levels of pharmaceutical residues in WWTP influents on average were the highest for acetylsalicylic acid (4700 ng L(-1)), followed by caffeine (2250 ng L(-1)) and ibuprofen (702 ng L(-1)). In effluents, the concentration of caffeine was the highest (307 ng L(-1)), followed by acetylsalicylic acid (261 ng L(-1)) and mefenamic acid (251 ng L(-1)). In surface water, acetylsalicylic acid showed the highest levels (on average 1360 ng L(-1) in canals and 313 ng L(-1) in the river). Removal efficiencies of WWTPs for roxithromycin, sulfamethoxazole and sulfamethazine were determined negligible. For several compounds, the concentrations in ambient water were higher than those detected in the effluents, implying contribution of the WWTPs to be negligible. Hazard quotients estimated for acetylsalicylic acid, ciprofloxacin, diclofenac and mefenamic acid in most of the canals and that of ciprofloxacin in the river, were greater than or close to 1, suggesting potential ecological risks. Ecological implications of the pharmaceutical residues in Bangkok waterway warrant further investigation.