1
|
2D Metal-Organic Frameworks: Properties, Synthesis, and Applications in Electrochemical and Optical Biosensors. BIOSENSORS 2023; 13:123. [PMID: 36671958 PMCID: PMC9855741 DOI: 10.3390/bios13010123] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/29/2022] [Revised: 12/31/2022] [Accepted: 01/09/2023] [Indexed: 06/17/2023]
Abstract
Two-dimensional (2D) nanomaterials like graphene, layered double hydroxides, etc., have received increasing attention owing to their unique properties imparted by their 2D structure. The newest member in this family is based on metal-organic frameworks (MOFs), which have been long known for their exceptional physicochemical properties-high surface area, tunable pore size, catalytic properties, etc., to list a few. 2D MOFs are promising materials for various applications as they combine the exciting properties of 2D materials and MOFs. Recently, they have been extensively used in biosensors by virtue of their enormous surface area and abundant, accessible active sites. In this review, we provide a synopsis of the recent progress in the field of 2D MOFs for sensor applications. Initially, the properties and synthesis techniques of 2D MOFs are briefly outlined with examples. Further, electrochemical and optical biosensors based on 2D MOFs are summarized, and the associated challenges are outlined.
Collapse
|
2
|
Laser-Assisted Scalable Pore Fabrication in Graphene Membranes for Blue-Energy Generation. Chemphyschem 2022; 24:e202200598. [PMID: 36510477 DOI: 10.1002/cphc.202200598] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/11/2022] [Revised: 12/09/2022] [Accepted: 12/12/2022] [Indexed: 12/15/2022]
Abstract
The osmotic energy from a salinity gradient (i. e. blue energy) is identified as a promising non-intermittent renewable energy source for a sustainable technology. However, this membrane-based technology is facing major limitations for large-scale viability, primarily due to the poor membrane performance. An atomically thin 2D nanoporous material with high surface charge density resolves the bottleneck and leads to a new class of membrane material the salinity gradient energy. Although 2D nanoporous membranes show extremely high performance in terms of energy generation through the single pore, the fabrication and technical challenges such as ion concentration polarization make the nanoporous membrane a non-viable solution. On the other hand, the mesoporous and micro porous structures in the 2D membrane result in improved energy generation with very low fabrication complexity. In the present work, we report femtosecond (fs) laser-assisted scalable fabrication of μm to mm size pores on Graphene membrane for blue energy generation for the first time. A remarkable osmotic power in the order of μW has been achieved using mm size pores, which is about six orders of magnitudes higher compared to nanoporous membranes, which is mainly due to the diffusion-osmosis driven large ionic flux. Our work paves the way towards fs laser-assisted scalable pore creation in the 2D membrane for large-scale osmotic power generation.
Collapse
|
3
|
Stabilization of microsized Sn anode with carbon coating and fluoroethylene carbonate additive for high-performance Li-ion batteries. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2022.117066] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
|
4
|
Design of an aluminium ion battery with a graphyne host: lowest volume expansion, high stability and low diffusion barriers. NANOSCALE ADVANCES 2022; 4:3870-3882. [PMID: 36133336 PMCID: PMC9470031 DOI: 10.1039/d2na00058j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/23/2022] [Accepted: 07/22/2022] [Indexed: 06/16/2023]
Abstract
Commercialization of aluminium ion battery (AIB) requires limited volume expansion of the host cathode materials after AlCl4 intercalation, lower activation barrier, high theoretical specific capacity (TSC), cyclic durability and thermodynamic stability. Most of the carbon and non-carbon based cathode hosts explored so far failed to address the issue of volume expansion and there is a lack of clarity about thermodynamic stability. In this work, we employed multipronged first principles computational approaches on α- and γ-graphyne (GY) and showed that α-GY as a promising cathode host addresses each of the above concerns. Both α and γ-GYs provide ample space to accommodate more number of AlCl4 molecules leading to a high TSC of 186 mA h g-1 and open circuit voltages of 2.18 and 2.22 V, respectively. The absence of bond dissociation of AlCl4 and deformation of GY sheets at 300 and 600 K, as revealed by ab initio molecular dynamics (AIMD) simulation, indicates the stability of α- and γ-GY with adsorbed AlCl4. α-GY after intercalation shows a volume expansion of 186% which is the lowest among the cathode materials studied so far. The negligible expansion energy per unit surface area (∼0.003 eV Å-2) ensures the reversibility and hence cyclic durability of α-GY. Although the γ-GY shows a volume expansion of 249%, it is still promising. The NEB based diffusion study on monolayer and bilayer GY estimates the activation barriers to be (0.26, 0.06 eV) and (0.42, 0.16 eV) for α and γ phases, respectively. These values are either comparable to or lower than those of earlier reported cathode hosts.
Collapse
|
5
|
A novel, highly sensitive electrochemical 1,4-dioxane sensor based on reduced graphene oxide-curcumin nanocomposite. RSC Adv 2022; 12:19375-19383. [PMID: 35865592 PMCID: PMC9251910 DOI: 10.1039/d2ra01789j] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/19/2022] [Accepted: 04/21/2022] [Indexed: 12/26/2022] Open
Abstract
1,4-Dioxane is a carcinogenic, non-biodegradable, organic water pollutant which is used as a solvent in various industries. It is also formed as an undesired by-product in the cosmetic and pharmaceutical industry. Given its carcinogenicity and ability to pollute, it is desirable to develop a sensitive and selective sensor to detect it in drinking water and other water bodies. Current works on this sensor are very few and involve complex metal oxide composite systems. A sensitive electrochemical sensor for 1,4-dioxane was developed by modifying a glassy carbon electrode (GCE) with a reduced graphene oxide–curcumin (rGO–CM) nanocomposite synthesized by a simple solution approach. The prepared rGO–CM was characterized by X-ray Diffraction (XRD), Fourier Transform Infrared (FTIR) Spectroscopy, Raman spectroscopy, UV-Vis spectroscopy, and Scanning Electron Microscopy (SEM). The rGO–CM/GCE sensor was employed for the detection of 1,4-dioxane in the range of 0.1–100 μM. Although, the detection range is narrower compared to reported literature, the sensitivity obtained for the proposed sensor is far superior. Moreover, the limit of detection (0.13 μM) is lower than the dioxane detection target defined by the World Health Organization (0.56 μM). The proposed rGO–CM/GCE also showed excellent stability and good recovery values in real sample (tap water and drinking water) analysis. Reduced graphene oxide–curcumin (rGO–CM) nanocomposite was prepared from graphite oxide using curcumin. The rGO–CM/GCE was used for highly sensitive 1,4-dioxane detection. The LOD obtained (0.13 μM) was lower than the WHO guideline value.![]()
Collapse
|
6
|
Design and development of an automated experimental setup for ion transport measurements. THE REVIEW OF SCIENTIFIC INSTRUMENTS 2022; 93:064104. [PMID: 35778037 DOI: 10.1063/5.0086296] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/24/2022] [Accepted: 05/21/2022] [Indexed: 06/15/2023]
Abstract
The ion transport measurements using various ion-exchange membranes (IEMs) face several challenges, including controllability, reproducibility, reliability, and accuracy. This is due to the manual filling of the solutions in two different reservoirs in a typical diffusion cell experiment with a random flow rate, which results in the diffusion through the IEM even before turning on the data acquisition system as reported so far. Here, we report the design and development of an automated experimental setup for ion transport measurements using IEMs. The experimental setup has been calibrated and validated by performing ion transport measurements using a standard nanoporous polycarbonate membrane. We hope that the present work will provide a standard tool for realizing reliable ion transport measurements using ion-exchange membranes and can be extended to study other membranes of various pore densities, shapes, and sizes.
Collapse
|
7
|
Absorption-enhanced EMI shielding using silver decorated three-dimensional porous architected reduced graphene oxide in polybenzoxazine composites. NEW J CHEM 2021. [DOI: 10.1039/d1nj03536c] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/25/2023]
Abstract
The proliferation of wearable and portable electronic media has increased the demand for highly efficient materials that can be used to create shields against electromagnetic interference.
Collapse
|
8
|
Abstract
Graphene possesses wider biomedical applications including drug delivery, photothermal ablation of tumors, biosensors, and also in the disease diagnosis. The accidental or intentional exposure of the environment including plants, ecosystem, and humans toward graphene is gradually increasing. Therefore, graphene toxicity becomes a critical issue to be addressed despite their diverse applications in multiple fields. In this situation, the scientific community as well as the general public must get awareness about the toxicity of graphene. This article, therefore, reviews the investigations on graphene toxicity. This review reveals the toxicity of graphene in vitro, in vivo models along with the environmental toxicity. The advantages of graphene toxicity in bacterial cells and cancer cells were also reviewed.
Collapse
|
9
|
In situ nitrogen-doped, defect-induced carbon nanotubes as an efficient anode for sodium-ion batteries. NANOTECHNOLOGY 2020; 31:235403. [PMID: 32050172 DOI: 10.1088/1361-6528/ab7592] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
The incorporation of heteroatoms and defects in carbonaceous material is a well-known approach to improve the electrochemical performance of the anode in a sodium-ion battery (NIB). However, previous works aimed to use either heteroatom-doped or defect-enriched carbon material. The present work focuses on nitrogen-doped, defect-induced surface-modified carbon nanotubes (MN-BCNT) having the synergy of both the effects to improve the electrochemical performance of the NIB. Initially, in situ nitrogen-doped CNTs were grown using a scalable, cost-effective and green synthesis technique. In situ nitrogen doping introduces lattice defects resulting in bamboo-shaped CNTs. The defects were further enriched by opening the ends of the tubes and also by shortening them. This structure demonstrates the high capacity of 278 mA h g-1 at a current density of 50 mA g-1, which is more than double compared to conventional CNTs. The improved performance of MN-BCNT is attributed to the improved electrical conductivity due to nitrogen doping and the availability of significant active sites as a result of tube shortening. Moreover, the designed structure shows good cyclic stability at 200 mA g-1 accompanied with excellent rate capability.
Collapse
|
10
|
Boron and nitrogen co-doped carbon nanosheets encapsulating nano iron as an efficient catalyst for electrochemical CO2 reduction utilizing a proton exchange membrane CO2 conversion cell. J Colloid Interface Sci 2020; 559:169-177. [DOI: 10.1016/j.jcis.2019.10.030] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/07/2019] [Revised: 09/28/2019] [Accepted: 10/08/2019] [Indexed: 11/27/2022]
|
11
|
Optimizing metal-support interphase for efficient fuel cell oxygen reduction reaction catalyst. J Colloid Interface Sci 2019; 561:439-448. [PMID: 31735416 DOI: 10.1016/j.jcis.2019.11.015] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/15/2019] [Revised: 10/16/2019] [Accepted: 11/03/2019] [Indexed: 10/25/2022]
Abstract
The development of cost-effective and highly-efficient electro-catalysts is essential for the advancement of proton exchange membrane fuel cells (PEMFC). We present a novel nitrogen-sulphur co-doped carbon nanotubes-few layer graphene1D-2D hybrid support formed by partially exfoliating multiwall carbon nanotubes (PECNT), to improve interface bonding to catalyst nanoparticles. Detailed Raman spectroscopy and STEM-EDS analyses demonstrate that active sites on the co-doped hybrid support ensure both uniform distribution and improved bonding of the catalyst nanoparticles to the support. Electrochemical studies show that Pt nanoparticles decorated on nitrogen-sulphur co-doped PECNT (Pt/NS-PECNT) have higher electrochemical active surface area and mass activity accompanied by low H2O2 formation and improved positive half-wave potential, as compared to those decorated on co-doped rGO-incorporated PECNT hybrid structure (Pt/NS-(rGO-PECNT)). Fuel cell measurements demonstrate a higher power density for our novel (Pt/NS-PECNT) electro-catalyst when compared to both Pt/NS-(rGO + PECNT), and commercial Pt/C electro-catalyst. We demonstrate in this work that the interconnectivity between Pt-nanoparticles and the dopant or defect sites on the support play a crucial role in enhancing the ORR activity, fuel cell performance, and durability of the catalyst.
Collapse
|
12
|
A modified bulge test for in-situ study of ionic permeation properties of membranes under continuously tunable, uniform pressure. THE REVIEW OF SCIENTIFIC INSTRUMENTS 2019; 90:073906. [PMID: 31370476 DOI: 10.1063/1.5083708] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/30/2018] [Accepted: 07/10/2019] [Indexed: 06/10/2023]
Abstract
The bulge test is a well-known material test to measure the mechanical properties of metal plates, thin films, and membranes. Also, two different experimental setups are needed to apply pressure and make a measurement. In this work, we describe a modified bulge test to both apply pressure and measure the electrical and ionic permeation properties of membranes in situ. A membrane, clamped at its periphery, with a circular window for measurement, is sandwiched between two liquids. The liquids serve dual purpose by facilitating the application of differential pressure and thus stress, by controlling the extent of immersion of the membrane in the liquid below the membrane, as well as enabling measurement of electrical and mass percolation properties. This was achieved with a stepper motor, a load cell, and a microcontroller. Relevant mathematical models are developed and discussed. Nafion was used to test and validate this approach, using electroimpedance spectroscopy in a 2-electrode configuration with gallium on both sides and in a 3-electrode configuration with electrolyte on one side and gallium on the other. Frequency-dependent response was modeled using equivalent circuits. The resistance of Nafion increases with the depth of immersion and therefore applied pressure. For Nafion in the 2-electrode configuration, conductivity was calculated to be ∼6.4 × 10-3 S/cm at the equilibrium position, where stress on the membrane is zero. This value matches well with existing literature values for partially hydrated Nafion. Also, it was observed that the response is symmetric about the equilibrium position.
Collapse
|
13
|
Carbon nanotube bottles for incorporation, release and enhanced cytotoxic effect of cisplatin. CARBON 2019; 50:1625-1634. [PMID: 31105316 PMCID: PMC6522380 DOI: 10.1016/j.carbon.2011.11.043] [Citation(s) in RCA: 52] [Impact Index Per Article: 10.4] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
Carbon nanotubes (CNTs) have emerged as promising drug delivery systems particularly for cancer therapy, due to their abilities to overcome some of the challenges faced by cancer treatment, namely non-specificity, poor permeability into tumour tissues, and poor stability of anticancer drugs. Encapsulation of anticancer agents inside CNTs provides protection from external deactivating agents. However, the open ends of the CNTs leave the encapsulated drugs exposed to the environment and eventually their uncontrolled release before reaching the desired target. In this study, we report the successful encapsulation of cisplatin, a FDA-approved chemotherapeutic drug, into multi-walled carbon nanotubes and the capping at the ends with functionalised gold nanoparticles to achieve a "carbon nanotube bottle" structure. In this proof-of-concept study, these caps did not prevent the encapsulation of drug in the inner space of CNTs; on the contrary, we achieved higher drug loading inside the nanotubes in comparison with data reported in literature. In addition, we demonstrated that encapsulated cisplatin could be delivered in living cells under physiological conditions to exert its pharmacological action.
Collapse
|
14
|
N-doped 3D porous carbon-graphene/polyaniline hybrid and N-doped porous carbon coated gC3N4 nanosheets for excellent energy density asymmetric supercapacitors. Electrochim Acta 2019. [DOI: 10.1016/j.electacta.2019.03.043] [Citation(s) in RCA: 35] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
|
15
|
An efficient electrode material for high performance solid-state hybrid supercapacitors based on a Cu/CuO/porous carbon nanofiber/TiO 2 hybrid composite. BEILSTEIN JOURNAL OF NANOTECHNOLOGY 2019; 10:781-793. [PMID: 31019865 PMCID: PMC6466681 DOI: 10.3762/bjnano.10.78] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/13/2018] [Accepted: 03/08/2019] [Indexed: 06/09/2023]
Abstract
A Cu/CuO/porous carbon nanofiber/TiO2 (Cu/CuO/PCNF/TiO2) composite uniformly covered with TiO2 nanoparticles was synthesized by electrospinning and a simple hydrothermal technique. The synthesized composite exhibits a unique morphology and excellent supercapacitive performance, including both electric double layer and pseudo-capacitance behavior. Electrochemical measurements were performed by cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy. The highest specific capacitance value of 530 F g-1 at a current density of 1.5 A g-1 was obtained for the Cu/CuO/PCNF/TiO2 composite electrode in a three-electrode configuration. The solid-state hybrid supercapacitor (SSHSC) fabricated based on this composite exhibits a high specific capacitance value of 330 F g-1 at a current density of 1 A g-1 with 78.8% capacitance retention for up to 10,000 cycles. At the same time, a high energy density of 45.83 Wh kg-1 at a power density of 1.27 kW kg-1 was also realized. The developed electrode material provides new insight into ways to enhance the electrochemical properties of solid-state supercapacitors, based on the synergistic effect of porous carbon nanofibers, metal and metal oxide nanoparticles, which together open up new opportunities for energy storage and conversion applications.
Collapse
|
16
|
Synergistic Role of Electrolyte and Binder for Enhanced Electrochemical Storage for Sodium-Ion Battery. ACS OMEGA 2018; 3:9945-9955. [PMID: 31459123 PMCID: PMC6645709 DOI: 10.1021/acsomega.8b01407] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/21/2018] [Accepted: 08/14/2018] [Indexed: 06/10/2023]
Abstract
Sodium-ion batteries are promising futuristic large-scale energy-storage devices because of the abundance and low cost of sodium. However, the development and commercialization of the sodium-ion battery solely depends on the use of high-capacity electrode materials. Among the various metal oxides, SnO2 has a high theoretical specific capacity for sodium-ion battery. However, the enormous volume expansion and low electrical conductivity of SnO2 hinder its capability to reach the predicted theoretical value. Although different nanostructured designs of electrode materials like SnO2 nanocomposites have been studied, the effects of other cell components like electrolyte and binder on the specific capacity and cyclic stability are yet to be understood. In the present study, we have investigated the synergistic effect of electrolyte and binder on the performance enhancement of SnO2 supported on the intertwined network structure of reduced graphene oxide partially open multiwalled carbon nanotube hybrid as anode in sodium-ion battery. Our result shows that sodium carboxyl methyl cellulose and ethylene carbonate/diethyl carbonate as the electrolyte solvent offers a high specific capacity of 688 mAh g-1 and a satisfactory cyclic stability for 500 cycles. This is about 56% enhancement in specific capacity compared to the use of poly(vinylidene fluoride) binder and propylene carbonate as the electrolyte solvent. The present study provides a better understanding of the synergistic role of electrolyte and binder for the development of metal-oxide-based electrode materials for the advancement of the commercialization of sodium-ion battery.
Collapse
|
17
|
Multi-walled carbon nanotube-induced inhalation toxicity: Recognizing nano bis-demethoxy curcumin analog as an ameliorating candidate. NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE 2018; 14:1809-1822. [DOI: 10.1016/j.nano.2018.05.003] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/15/2017] [Revised: 04/27/2018] [Accepted: 05/04/2018] [Indexed: 10/16/2022]
|
18
|
Performance of Partially Exfoliated Nitrogen-Doped Carbon Nanotubes Wrapped with Hierarchical Porous Carbon in Electrolytes. CHEMSUSCHEM 2018; 11:1664-1677. [PMID: 29693315 DOI: 10.1002/cssc.201800147] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/23/2018] [Indexed: 06/08/2023]
Abstract
The preparation of highly conductive, high-surface-area, heteroatom-doped, porous carbon nanocomposite materials with enhanced electrochemical performance for sustainable energy-storage technologies, such as supercapacitors, is challenging. Herein, a route for the large-scale synthesis of nitrogen-doped porous carbon wrapped partially exfoliated carbon nanotubes (N-PPECNTs) with an interconnected hierarchical porous structure, as an advanced electrode material that can realize several potential applications for energy storage, is presented. Polypyrrole conductive polymer acts as both nitrogen and carbon sources that contribute to the pseudocapacitance. Partially exfoliated carbon nanotubes (PECNTs) provide a high specific surface area for ion and charge transportation and act as a conductive matrix. The derived porous N-PPECNT displays a nitrogen content of 6.95 at %, with a specific surface area of 2050 m2 g-1 , and pore volume of 1.13 cm3 g-1 . N-PPECNTs, as an electrode material for supercapacitors, exhibit an excellent specific capacitance of 781 F g-1 at 2 A g-1 , with a high cycling stability of 95.3 % over 10 000 cycles. Furthermore, the symmetric supercapacitor exhibits remarkable energy densities as high as 172.8, 62.7, and 53.55 Wh kg-1 in 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([BMIM][TFSI]), organic, and aqueous electrolytes, respectively. Also, biocompatible hydrogel and polymer gel electrolyte based, stable, flexible supercapacitors with excellent electrochemical performance could be demonstrated.
Collapse
|
19
|
High-performance Platinum-free oxygen reduction reaction and hydrogen oxidation reaction catalyst in polymer electrolyte membrane fuel cell. Sci Rep 2018; 8:3591. [PMID: 29483545 PMCID: PMC5827662 DOI: 10.1038/s41598-018-22001-9] [Citation(s) in RCA: 63] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/06/2017] [Accepted: 02/08/2018] [Indexed: 11/22/2022] Open
Abstract
The integration of polymer electrolyte membrane fuel cell (PEMFC) stack into vehicles necessitates the replacement of high-priced platinum (Pt)-based electrocatalyst, which contributes to about 45% of the cost of the stack. The implementation of high-performance and durable Pt metal-free catalyst for both oxygen reduction reaction (ORR) and hydrogen oxidation reaction (HOR) could significantly enable large-scale commercialization of fuel cell–powered vehicles. Towards this goal, a simple, scalable, single-step synthesis method was adopted to develop palladium-cobalt alloy supported on nitrogen-doped reduced graphene oxide (Pd3Co/NG) nanocomposite. Rotating ring-disk electrode (RRDE) studies for the electrochemical activity towards ORR indicates that ORR proceeds via nearly four-electron mechanism. Besides, the mass activity of Pd3Co/NG shows an enhancement of 1.6 times compared to that of Pd/NG. The full fuel cell measurements were carried out using Pd3Co/NG at the anode, cathode in conjunction with Pt/C and simultaneously at both anode and cathode. A maximum power density of 68 mW/cm2 is accomplished from the simultaneous use of Pd3Co/NG as both anode and cathode electrocatalyst with individual loading of 0.5 mg/cm2 at 60 °C without any backpressure. To the best of our knowledge, the present study is the first of its kind of a fully non-Pt based PEM full cell.
Collapse
|
20
|
High-pressure investigation of ionic functionalized graphitic carbon nitride nanostructures for CO2 capture. J CO2 UTIL 2017. [DOI: 10.1016/j.jcou.2017.06.022] [Citation(s) in RCA: 24] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
21
|
Development of a nitrogen-doped 2D material for tribological applications in the boundary-lubrication regime. BEILSTEIN JOURNAL OF NANOTECHNOLOGY 2017; 8:1476-1483. [PMID: 28900601 PMCID: PMC5530610 DOI: 10.3762/bjnano.8.147] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/14/2017] [Accepted: 06/27/2017] [Indexed: 06/02/2023]
Abstract
The present paper describes a facile synthesis method for nitrogen-doped reduced graphene oxide (N-rGO) and the application of N-rGO as an effective additive for improving the tribological properties of base oil. N-rGO has been characterized by different characterization techniques such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and Raman spectroscopy. N-rGO-based nanolubricants are prepared and their tribological properties are studied using a four-ball tester. The nanolubricants show excellent stability over a period of six months and a significant decrease in coefficient of friction (25%) for small amounts of N-rGO (3 mg/L). The improvement in tribological properties can be attributed to the sliding mechanism of N-rGO accompanied by the high mechanical strength of graphene. Further, the nanolubricant is prepared at large scale (700 liter) and field trials are carried out at one NTPC thermal plant in India. The implementation of the nanolubricant in an induced draft (ID) fan results in the remarkable decrease in the power consumption.
Collapse
|
22
|
Application of Few-Layered Reduced Graphene Oxide Nanofluid as a Working Fluid for Direct Absorption Solar Collectors. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 2017; 17:1233-1239. [PMID: 29683297 DOI: 10.1166/jnn.2017.12695] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Direct absorption solar collectors (DASC) convert solar energy into heat energy and transfer this heat energy to a carrier fluid. Numerical and experimental studies have shown that replacing the absorber medium with nanofluids in DASC increases the efficiency of solar collector significantly. Present work investigates the dispersion stability, optical and thermal properties of reduced few-layered graphene oxide (rGO) dispersed nanofluids for DASC. The synthesis of rGO was carried out by hydrogen exfoliation of graphene oxide at 200 °C. As-synthesized rGO was suitably functionalized to impart the hydrophilic nature. Different characterization techniques were employed to analyze the surface morphology of the sample. Nanofluids were prepared by dispersing calculated amount of functionalized rGO in DI water and ethylene glycol. Optical properties study reveals that the nanofluids exhibit good absorption ability over base fluids. The extinction coefficient of nanofluids showed significant improvement even at low concentration. Furthermore, the temperature dependent thermal conductivity study with different volume fractions, carried out for DI water and ethylene glycol-based nanofluids, shows considerable enhancement.
Collapse
|
23
|
Solar synthesized tin oxide nanoparticles dispersed on graphene wrapped carbon nanotubes as a Li ion battery anode material with improved stability. RSC Adv 2017. [DOI: 10.1039/c6ra27515j] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023] Open
Abstract
Average 3 nm SnO2 nanoparticles dispersed protruded surfaced graphene wrapped carbon nanotubes were used as a functional anode to achieve improved capacity and remarkable cyclic stability.
Collapse
|
24
|
Modified graphene based molecular imprinted polymer for electrochemical non-enzymatic cholesterol biosensor. Eur Polym J 2017. [DOI: 10.1016/j.eurpolymj.2016.11.024] [Citation(s) in RCA: 52] [Impact Index Per Article: 7.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
25
|
An efficient and durable novel catalyst support with superior electron-donating properties and fuel diffusivity for a direct methanol fuel cell. Catal Sci Technol 2017. [DOI: 10.1039/c7cy01522d] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
The direct methanol fuel cell (DMFC) is projected as one of the most promising next-generation fuel cell technologies and reducing the catalyst loading at the anode side with an improvement in the sluggishness of methanol oxidation has become the key research topic in the field.
Collapse
|
26
|
Electrochemical catalytic activity study of nitrogen-containing hierarchically porous carbon and its application in dye-sensitized solar cells. RSC Adv 2016. [DOI: 10.1039/c6ra18121j] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
Nitrogen-containing hierarchically porous carbon is derived by carbonizing and activating polypyrrole nanostructure (APNP) using a template-free synthesis method and is demonstrated to be an efficient counter electrode (CE) in dye-sensitized solar cells (DSSCs).
Collapse
|
27
|
Towards Intravenous Drug Delivery: Augmenting the Stability and Dispersity of Bis-Demethoxy Curcumin Analog by Bottom-Up Strategy. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 2016; 16:1186-1189. [PMID: 27398584 DOI: 10.1166/jnn.2016.12344] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
Intravenous route is the best strategy to accomplish fastest and highest delivery of drugs. Hydrophobic drugs like curcumin and its analog exhibit disadvantages like low bioavailability, poor absorption and rapid precipitation on intravenous delivery, all leading to its poor therapeutic value. These can be by-passed by enhancing the dispersity, stability and decreasing the size of the drug by nanotization. Thus, with an intention to deliver bis-demethoxy curcumin analog via intravenous route, we have studied the effect of DMSO, ethanol and acetone on the size, size distribution, stability and yield and identified the best solvent in terms of smallest size, narrow size distribution, more stability and high yield of nano bis-demethoxy curcumin analog (NBDMCA). NBDMCA prepared using DMSO showed the lowest mean particle size cum polydispersity index and highest zeta potential when compared to ethanol and acetone. Hence the DMSO based formulation can provide prolonged action and better efficacy at minimal doses. Thus, the DMSO based NBDMCA can emerge as an ideal therapeutic tool for human use.
Collapse
|
28
|
|
29
|
Abstract
The present study describes the synthesis of the triazolium based amine-rich ionic liquid (ARIL), namely, 3,5-diamino-1-methyl-1,2,4-triazolium tetrafluoroborate grafted graphene (HEG/ARIL), and its application in carbon dioxide adsorption.
Collapse
|
30
|
Enzyme-less and low-potential sensing of glucose using a glassy carbon electrode modified with palladium nanoparticles deposited on graphene-wrapped carbon nanotubes. Mikrochim Acta 2015. [DOI: 10.1007/s00604-015-1729-8] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
|
31
|
Effect of wrinkles on electrochemical performance of multiwalled carbon nanotubes as anode material for Li ion battery. Electrochim Acta 2015. [DOI: 10.1016/j.electacta.2015.10.169] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
|
32
|
Spontaneous and specific myogenic differentiation of human mesenchymal stem cells on polyethylene glycol-linked multi-walled carbon nanotube films for skeletal muscle engineering. NANOSCALE 2015; 7:18239-18249. [PMID: 26486984 DOI: 10.1039/c5nr04303d] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
This study explored the influence of polyethylene glycol-linked multi-walled carbon nanotube (PEG-CNT) films on skeletal myogenic differentiation of human mesenchymal stem cells (hMSCs). PEG-CNT films were prepared with nanoscale surface roughness, orderly arrangement of PEG-CNTs, high hydrophilicity and high mechanical strength. Notably, PEG-CNT films alone could direct the skeletal myogenic differentiation of hMSCs in the absence of myogenic induction factors. The quantitative real-time polymerase chain reaction (RT-PCR) showed that the non-induced hMSCs plated on the PEG-CNT films, compared to the negative control, presented significant up-regulation of general myogenic markers including early commitment markers of myoblast differentiation protein-1 (MyoD) and desmin, as well as a late phase marker of myosin heavy chain-2 (MHC). Corresponding protein analysis by immunoblot assays corroborated these results. Skeletal muscle-specific markers, fast skeletal troponin-C (TnC) and ryanodine receptor-1 (Ryr) were also significantly increased in the non-induced hMSCs on PEG-CNT films by RT-PCR. For these cells, the commitment to specific skeletal myoblasts was further proved by the absence of enhanced adipogenic, chondrogenic and osteogenic markers. This study elucidated that PEG-CNT films supported a dedicated differentiation of hMSCs into a skeletal myogenic lineage and can work as a promising material towards skeletal muscle injury repair.
Collapse
|
33
|
pH Responsive Release of Doxorubicin to the Cancer Cells by Functionalized Multi-Walled Carbon Nanotubes. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 2015; 15:4799-4805. [PMID: 26373040 DOI: 10.1166/jnn.2015.9817] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
The main aim of the current study is to formulate the Doxorubicin loaded functionalized carbon nanotubes to deliver the drug only to the cancer cells by using pH difference. Multi walled Carbon Nanotubes (MWNTs) have been identified as an efficient drug carrier through π-π linkage, because this covalent bond is sensitive to tumor microenvironments. This bond is acid cleavable, thereby providing a strong pH-responsive drug release, which may facilitate effective release near the acidic tumor microenvironment and thus reduces its overall systemic toxicity. Doxorubicin was released at low pH and taken up by tumor cells via adenosine triphosphate (ATP)-dependent endocytosis. By varying the Concentration of MWNTs with the Doxorubicin, it forms a conjugate. It is due to supra molecular interactions between the drug and MWNTs, so it shows high loading, prolonged release and improved cytotoxicity against cancer cells. This study shows the phenomenal pH responsive drug release to the cancerous microenvironment and prolonged release. This study suggests that MWNTs have a great potential as a drug carrier; the efficient formulation strategy requires further study.
Collapse
|
34
|
Cerium Oxide Nanoparticles Decorated Graphene Nanosheets for Selective Detection of Dopamine. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 2015; 15:4855-4862. [PMID: 26373047 DOI: 10.1166/jnn.2015.9812] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
The fabrication of a novel amperometric biosensor based on selective determination of dopamine (DA) using nafion coated cerium oxide nanoparticles (NPs) decorated graphene nanosheets (CeO2-HEG-nafion) as a transducer candidate is reported. Graphene was synthesized by hydrogen exfoliation technique. Decoration of CeO2NPs over graphene nanosheets was done by chemical reduction method. The electrochemical impedance spectroscopy (EIS) study shows the enhanced electron transfer kinetics of the composite compared to HEG modified and bare glassy carbon electrode (GCE). The response of the composite towards dopamine displays a lower oxidation potential of 0.23 V and a high oxidation current. The sensor exhibits linearity from 10 µM to 780 µM with a detection limit of 1 µM. In the presence of nafion, it shows excellent selectivity for coexisting interference species like Ascorbic acid (AA) and Uric acid (UA). The excellent performance of the biosensor can be attributed to large active surface area, enhanced electron transfer kinetics and high catalytic activity of the composite.
Collapse
|
35
|
Enhanced Photovoltaic Performance in Polypyrrole Nanoparticles Counter Electrode Due to Incorporation of Multi-Walled Carbon Nanotubes. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 2015; 15:4941-4947. [PMID: 26373060 DOI: 10.1166/jnn.2015.9813] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
In this present work, Multi-walled carbon nanotubes (MWNTs) with different content by weight (10%, 20%, 30%, 50% and 70%) are introduced into Polypyrrole nanoparticles (PPy NP) matrix and fabricated as Pt free counter electrodes (CEs) for dye-sensitized solar cell (DSSC). For comparison DSSCs using pristine PPy NP, MWNTs and Platinum (Pt) were also fabricated. The incorporation of MWNTs acts as conductive channel and co-catalyst to the PPy NP CEs in the reduction of li to I-. The electrochemical catalytic activities of different CEs were analysed by Cyclic Voltammetry (CV) and Electrochemical Impedance Spectroscopy (EIS) and photovoltaic performance was studied under standard AM 1.5 sunlight illumination. It was observed that incorporation of MWNTs in the PPy NP CE greatly enhanced the catalytic activity for I3 reduction and significantly reduced the charge transfer resistance in the PPy NP/MWNTs composite CE finally improving short-circuit photocurrent density, fill factor, open circuit voltage and power conversion efficiency of DSSC. DSSC fabricated from PPy NP/MWNTs composite CE with 50% MWNTs content reached the highest photoconversion efficiency of 5.80% which is 91% that of Pt CE based DSSC (6.37%).
Collapse
|
36
|
Hydrogen storage in platinum decorated hydrogen exfoliated graphene sheets by spillover mechanism. Phys Chem Chem Phys 2015; 16:26725-9. [PMID: 25379779 DOI: 10.1039/c4cp04214j] [Citation(s) in RCA: 40] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Development of lightweight materials with high hydrogen storage capacities is a great challenge for the hydrogen economy. Here, we report high pressure hydrogen adsorption-desorption studies of platinum-decorated hydrogen-exfoliated graphene sheets (Pt-HEG). Pt-HEG shows a maximum hydrogen uptake capacity of 1.4 wt% at 25 °C and 3 MPa. Analysis of the isosteric heat of adsorption provides evidence of spillover mechanism.
Collapse
|
37
|
One time nose-only inhalation of MWCNTs: Exploring the mechanism of toxicity by intermittent sacrifice in Wistar rats. Toxicol Rep 2015; 2:111-120. [PMID: 28962343 PMCID: PMC5598153 DOI: 10.1016/j.toxrep.2015.02.003] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/18/2014] [Revised: 01/08/2015] [Accepted: 02/01/2015] [Indexed: 12/24/2022] Open
Abstract
We have investigated the time-dependent effect of multi-walled carbon nanotubes (MWCNTs) in rats upon single inhalation exposure followed by intermittent sacrifice. The effects were monitored by analyzing the bronchoalveolar lavage fluid (BALF) and histopathological analysis. Cell count, neutrophils, lymphocytes, lactate dehydrogenase, alkaline phosphatase, protein and cytokines (tumor necrosis factor-alpha (TNF-α) and interleukin 4 (IL-4)) were significantly increased, while cell viability and alveolar macrophage count significantly decreased in the BALF of MWCNT-treated rats on day 1, day 7 and day 14 post-exposure, when compared to control rats. Histopathological analysis revealed inflammation, fibrosis and granuloma in the lungs of MWCNTs-treated rats on day 7 and day 14 post-exposure. We interpret that MWCNT induces inflammation, fibrosis and granuloma characterized by progressive elevation of TNF-α and IL-4. Histopathological studies further support our view and reveal the distribution of MWCNT in lungs and tracheobronchial lymph nodes (TBLN). We conclude that MWCNT-induced pulmonary toxicity is considerable even on single exposure.
Collapse
|
38
|
Synthesis of Carbon Nanohelices Using Sn Based Bi-Metal Oxide Catalysts. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 2015; 15:1287-1296. [PMID: 26353645 DOI: 10.1166/jnn.2015.8907] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
In this article, we report the synthesis of carbon nanohelices (CNH) by catalytic chemical vapor deposition (CCVD) technique using novel inorganic bi-metal oxide catalysts. The catalysts chosen have the general form X-Sn-O, where X refers to element having high carbon solubility such as Fe and Ni. These catalysts are synthesized by simple sol-gel technique. The CNH are grown by CCVD method at a temperature of 700 °C by taking acetylene as the carbon source. A reasonably good yield (40-60%) of CNH is obtained with each catalyst. The catalysts and CNH are characterized using different experimental techniques like X-ray diffraction, Raman spectroscopy, electron microscopy and thermogravimetric analysis. These characterizations suggest that morphology as well as the constituents of the metal oxide catalysts have significant influence on the coil and spiral growth of CNH. Finally, electrochemical study of the CNH shows good catalytic activity in 1 M H2SO4 aqueous solution compared to bare electrode and is therefore ideal for many applications.
Collapse
|
39
|
Nitrogen-Doped Graphene for Ionic Liquid Based Supercapacitors. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 2015; 15:1154-1161. [PMID: 26353626 DOI: 10.1166/jnn.2015.8890] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Graphene is a promising electrode material for supercapacitor applications due to its unique properties. Interaction of electrolyte ions with graphene lattice sites is a crucial factor in ionic liquid electrolyte based supercapacitors. In an effort to increase the interaction of high viscous electrolyte with electrode material, here, we here report the results of a systematic study carried out on a supercapacitor with nitrogen doped graphene as electrode material and [BMIM][TFSI] as electrolyte. In this study, nitrogen doped hydrogen exfoliated graphene (N-HEG) is prepared by radio frequency (R.F) magnetron sputtering and employed as electrode material for [BMIM][TFSI] electrolyte based high performance supercapacitor. N-HEG shows a high specific capacitance of 170.1 F/g compared to that of electrolyte modified graphene (124.5 F/g), at a specific current of 2 A/g. The improved performance of N-HEG based supercapacitor is attributed to the presence of nitrogen atoms in the graphene lattice which in turn increases the lattice-ion interaction and the electrical conductivity. In addition, the presence of wrinkles on the graphene surface provides a shortest directional path to access pores and surface. The device shows high charge storage capacity (72.37 Wh/kg) along with wide operating voltage (3.5 V) and high cyclic stability.
Collapse
|
40
|
Ionic liquid functionalization – an effective way to tune carbon dioxide adsorption properties of carbon nanotubes. RSC Adv 2015. [DOI: 10.1039/c5ra02159f] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
In this research, the influence of non-covalent functionalization by ionic liquids on carbon dioxide (CO2) adsorption–desorption properties of multi-walled carbon nanotubes (MWNTs) and partially exfoliated MWNTs (PEMWNTs) has been studied.
Collapse
|
41
|
A polymerized ionic liquid functionalized cathode catalyst support for a proton exchange membrane CO2 conversion cell. RSC Adv 2015. [DOI: 10.1039/c5ra03002a] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
This present study aims at the efficient conversion of CO2 to formic acid using a proton exchange membrane cell by selective functionalization of a cathode catalyst support.
Collapse
|
42
|
Iron encapsulated nitrogen and sulfur co-doped few layer graphene as a non-precious ORR catalyst for PEMFC application. RSC Adv 2015. [DOI: 10.1039/c5ra09030j] [Citation(s) in RCA: 27] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
A novel strategy was followed to prepare iron nanoparticle encapsulated nitrogen and sulfur co-doped few layer graphene (Fe-NSG) as non-precious ORR electrocatalyst.
Collapse
|
43
|
Synthesis and characterization of gold graphene composite with dyes as model substrates for decolorization: a surfactant free laser ablation approach. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2014; 133:365-371. [PMID: 24967542 DOI: 10.1016/j.saa.2014.05.069] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/11/2014] [Revised: 05/12/2014] [Accepted: 05/26/2014] [Indexed: 06/03/2023]
Abstract
A facile surfactant free laser ablation mediated synthesis (LAMS) of gold-graphene composite is reported here. The material was characterized using transmission electron microscopy, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, powdered X-ray diffraction, Raman spectroscopy, Zeta potential measurements and UV-Visible spectroscopic techniques. The as-synthesized gold-graphene composite was effectively utilized as catalyst for decolorization of 4 important textile and laser dyes. The integration of gold nanoparticles (AuNPs) with high surface area graphene has enhanced the catalytic activity of AuNPs. This enhanced activity is attributed to the synergistic interplay of pristine gold's electronic relay and π-π stacking of graphene with the dyes. This is evident when the Rhodamine B (RB) reduction rate of the composite is nearly twice faster than that of commercial citrate capped AuNPs of similar size. In case of Methylene blue (MB) the rate of reduction is 17,000 times faster than uncatalyzed reaction. This synthetic method opens door to laser ablation based fabrication of metal catalysts on graphene for improved performance without the aid of linkers and surfactants.
Collapse
|
44
|
Thermophysical and Electrical Properties of MnO<SUB>2</SUB> and TiO<SUB>2</SUB> Nanotubes Dispersed Transformer Oil. JOURNAL OF NANOFLUIDS 2014. [DOI: 10.1166/jon.2014.1098] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
45
|
Gold Decorated Graphene by Laser Ablation for Efficient Electrocatalytic Oxidation of Methanol and Ethanol. ELECTROANAL 2014. [DOI: 10.1002/elan.201400244] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
|
46
|
Abstract
Abstract
63,65Cu and 79,81Br spectra of halogenocuprate (I) complexes containing [CuPPh3 X2]- (X = Cl, Br, I) anions with different cations were recorded in the range 77 K -300 K. The results confirm the previous trend that, for a given ligand, 63Cu NQR frequencies are in the order Cl> Br > I. 63Cu NQR frequencies in [CuPPh3 X2]- are compared with those in neutral Cu(Ph3)2 X(X = Cl, Br) complexes and with the [CuX2]- (X = Cl, Br) anions, other three-coordinate Cu(I) complexes.
Collapse
|
47
|
Crystal Structure and NQR of Two Copper (I) Complexes of 4,6-Dimethylpyrimidine-2-thione. ACTA ACUST UNITED AC 2014. [DOI: 10.1515/zna-1994-1-229] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
Abstract
The crystal structure and 63Cu NQR spectra of two neutral hexanuclear Cu(I) complexes of 4,6-dimethylpyrimidine-2-thione, (Hdmpt); [dmptCu]66CHCl3 (l) and [dmptCu]6C2H4Cl2 (2), are reported. The number and relative intensities of the NQR resonances are in agreement with the results of the crystallographic study. The temperature-dependence of the resonances reveals that both compounds undergo a phase-change in the temperature range 77 K -300 K, both of which may be associated with the loss of a symmetry-element present in the high-temperature phase. The 35Cl resonances of CHCl3 in 1 could be observed in the low-temperature phase but the corresponding resonances for C2H4Cl2 in 2 were not detected.
Collapse
|
48
|
In vivo biodistribution of platinum-based drugs encapsulated into multi-walled carbon nanotubes. NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE 2014; 10:1465-75. [PMID: 24486857 DOI: 10.1016/j.nano.2014.01.004] [Citation(s) in RCA: 49] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/28/2013] [Revised: 01/08/2014] [Accepted: 01/17/2014] [Indexed: 02/04/2023]
Abstract
Carbon nanotubes (CNTs) are promising drug delivery systems due to their external functionalizable surface and their hollowed cavity that can encapsulate several bioactive molecules. In this study, the chemotherapeutic drug cisplatin or an inert platinum(IV) complex were entrapped inside functionalized-multi-walled-CNTs and intravenously injected into mice to investigate the influence of CNTs on the biodistribution of Pt-based molecules. The platinum levels in vital organs suggested that functionalized-CNTs did not affect cisplatin distribution, while they significantly enhanced the accumulation of Pt(IV) sample in some tissues (e.g. in the lungs, suggesting their potential application in lung cancer therapy) and reduced both kidney and liver accumulation (thus decreasing eventual nephrotoxicity, a typical side effect of cisplatin). Concurrently, CNTs did not induce any intrinsic abnormal immune response or inflammation, as confirmed by normal cytokine levels and histological evaluations. Therefore, functionalized nanotubes represent an efficient nano-carrier to improve accumulation of Pt species in targeted tissues/organs. From the clinical editor: In this preclinical study functionalized carbon nanotubes are reported to be safe and efficient for targeted delivery of platinum-containing compounds in rodents. Approaches like this may improve the treatment of specific cancers, since platinum based chemotherapies are commonly used, yet limited by toxicity and relatively poor target tissue concentration.
Collapse
|
49
|
Platinum-decorated chemically modified reduced graphene oxide–multiwalled carbon nanotube sandwich composite as cathode catalyst for a proton exchange membrane fuel cell. RSC Adv 2014. [DOI: 10.1039/c4ra02542c] [Citation(s) in RCA: 33] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
|
50
|
Synthesis of Au-MWCNT–Graphene hybrid composite for the rapid detection of H2O2 and glucose. RSC Adv 2014. [DOI: 10.1039/c4ra05353b] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
We report the fabrication of a novel amperometric biosensor based on narrow sized Au nanoparticles (∼4 nm) decorated multiwalled carbon nanotube-solar exfoliated graphene (MWCNTs–sG) hybrid composite as an enzyme immobilizer and sensing matrix for hydrogen peroxide (H2O2) and glucose.
Collapse
|