Non-linear shrinkage of Batson's #17 resin during vascular corrosion casting

Many studies of cardiovascular function require a realistic representation of vascular geometry. Corrosion casting has been used to acquire such geometries for many decades. However, the fidelity with which this method reproduces vascular anatomy has not been completely determined. Here we report on the non-linear shrinkage characteristics and exothermic properties of Batson's #17, a widely used casting resin, in model systems and in aortas of rats and rabbits. The setting process was captured using high-resolution photography. Shrinkage ranged from 3.4 ± 1.5% of the diameter in 1 ml plastic syringes (inner diameter 4.8 mm) to 19.6 ± 5.6% in the aorta of rats (diameter 1.5-2.6 mm). In addition, aortic curvature and branching angles changed during setting. These effects should be determined and corrected in studies of vascular geometry where high accuracy is required.

Value-Based Care: A Review of Key Challenges and Opportunities Relevant to Medical Technology Innovators

Developed countries struggle with high healthcare spending, and cost is often cited as a barrier to the introduction of new patient care technologies. The core objective of this review article is to help familiarize medical technology innovators with trends in the health economic environment and the implications for the adoption of new technologies. We review and discuss this topic in language accessible to medical technology innovators. We assess macrolevel developments in healthcare spending and highlight measures already taken to control spending. We discuss practical implications for anyone involved in healthcare innovation. Two observations are central to this discussion: (1) the U.S. spends significantly more on healthcare per capita than any other developed country; (2) across developed countries, healthcare spending has risen steadily over the past two decades. Nevertheless, higher spending has not always led to improvements in health. As a result, innovators need to be prepared to navigate an outcomes-oriented and value-based environment that is being defined by the emerging requirements of various healthcare stakeholders. Practically, new products should aim to improve health outcomes at a cost deemed “good value” and/or reduce cost for one or multiple stakeholders. Opportunities also exist for tools that enable cost/outcomes tracking, which will help demonstrate value to providers, insurers, and patients.

Elevated uptake of plasma macromolecules by regions of arterial wall predisposed to plaque instability in a mouse model

Atherosclerosis may be triggered by an elevated net transport of lipid-carrying macromolecules from plasma into the arterial wall. We hypothesised that whether lesions are of the thin-cap fibroatheroma (TCFA) type or are less fatty and more fibrous depends on the degree of elevation of transport, with greater uptake leading to the former. We further hypothesised that the degree of elevation can depend on haemodynamic wall shear stress characteristics and nitric oxide synthesis. Placing a tapered cuff around the carotid artery of apolipoprotein E -/- mice modifies patterns of shear stress and eNOS expression, and triggers lesion development at the upstream and downstream cuff margins; upstream but not downstream lesions resemble the TCFA. We measured wall uptake of a macromolecular tracer in the carotid artery of C57bl/6 mice after cuff placement. Uptake was elevated in the regions that develop lesions in hyperlipidaemic mice and was significantly more elevated where plaques of the TCFA type develop. Computational simulations and effects of reversing the cuff orientation indicated a role for solid as well as fluid mechanical stresses. Inhibiting NO synthesis abolished the difference in uptake between the upstream and downstream sites. The data support the hypothesis that excessively elevated wall uptake of plasma macromolecules initiates the development of the TCFA, suggest that such uptake can result from solid and fluid mechanical stresses, and are consistent with a role for NO synthesis. Modification of wall transport properties might form the basis of novel methods for reducing plaque rupture.

Computation in the rabbit aorta of a new metric - the transverse wall shear stress - to quantify the multidirectional character of disturbed blood flow

Spatial variation of the haemodynamic stresses acting on the arterial wall is commonly assumed to explain the focal development of atherosclerosis. Disturbed flow in particular is thought to play a key role. However, widely-used metrics developed to quantify its extent are unable to distinguish between uniaxial and multidirectional flows. We analysed pulsatile flow fields obtained in idealised and anatomically-realistic arterial geometries using computational fluid dynamics techniques, and in particular investigated the multidirectionality of the flow fields, capturing this aspect of near-wall blood flow with a new metric - the transverse wall shear stress (transWSS) - calculated as the time-average of wall shear stress components perpendicular to the mean flow direction. In the idealised branching geometry, multidirectional flow was observed downstream of the branch ostium, a region of flow stagnation, and to the sides of the ostium. The distribution of the transWSS was different from the pattern of traditional haemodynamic metrics and more dependent on the velocity waveform imposed at the branch outlet. In rabbit aortas, transWSS patterns were again different from patterns of traditional metrics. The near-branch pattern varied between intercostal ostia, as is the case for lesion distribution; for some branches there were striking resemblances to the age-dependent patterns of disease seen in rabbit and human aortas. The new metric may lead to improved understanding of atherogenesis.

Variability of computational fluid dynamics solutions for pressure and flow in a giant aneurysm: the ASME 2012 Summer Bioengineering Conference CFD Challenge

Stimulated by a recent controversy regarding pressure drops predicted in a giant aneurysm with a proximal stenosis, the present study sought to assess variability in the prediction of pressures and flow by a wide variety of research groups. In phase I, lumen geometry, flow rates, and fluid properties were specified, leaving each research group to choose their solver, discretization, and solution strategies. Variability was assessed by having each group interpolate their results onto a standardized mesh and centerline. For phase II, a physical model of the geometry was constructed, from which pressure and flow rates were measured. Groups repeated their simulations using a geometry reconstructed from a micro-computed tomography (CT) scan of the physical model with the measured flow rates and fluid properties. Phase I results from 25 groups demonstrated remarkable consistency in the pressure patterns, with the majority predicting peak systolic pressure drops within 8% of each other. Aneurysm sac flow patterns were more variable with only a few groups reporting peak systolic flow instabilities owing to their use of high temporal resolutions. Variability for phase II was comparable, and the median predicted pressure drops were within a few millimeters of mercury of the measured values but only after accounting for submillimeter errors in the reconstruction of the life-sized flow model from micro-CT. In summary, pressure can be predicted with consistency by CFD across a wide range of solvers and solution strategies, but this may not hold true for specific flow patterns or derived quantities. Future challenges are needed and should focus on hemodynamic quantities thought to be of clinical interest.

A novel method for quantifying spatial correlations between patterns of atherosclerosis and hemodynamic factors

Studies investigating the relation between the focal nature of atherosclerosis and hemodynamic factors are employing increasingly rigorous approaches to map the disease and calculate hemodynamic metrics. However, no standardized methodology exists to quantitatively compare these distributions. We developed a statistical technique that can be used to determine if hemodynamic and lesion maps are significantly correlated. The technique, which is based on a surrogate data analysis, does not require any assumptions (such as linearity) on the nature of the correlation. Randomized sampling was used to ensure the independence of data points, another basic assumption of commonly-used statistical methods that is often disregarded. The novel technique was used to compare previously-obtained maps of lesion prevalence in aortas of immature and mature cholesterol-fed rabbits to corresponding maps of wall shear stress, averaged across several animals in each age group. A significant spatial correlation was found in the proximal descending thoracic aorta, but not further downstream. Around intercostal branch openings the correlation was borderline significant in immature but not in mature animals. The results confirm the need for further investigation of the relation between the localization of atherosclerosis and blood flow, in conjunction with appropriate statistical techniques such as the method proposed here.