Characterization of AMA1-RON2L complex with native gel electrophoresis and capillary isoelectric focusing

Rhoptry neck protein 2 (RON2) binds to the hydrophobic groove of apical membrane antigen 1 (AMA1), an interaction essential for invasion of red blood cells (RBCs) by Plasmodium falciparum (Pf) parasites. Vaccination with AMA1 alone has been shown to be immunogenic, but unprotective even against homologous challenge in human trials. However, the AMA1-RON2L (L is referred to as the loop region of RON2 peptide) complex is a promising candidate, as preclinical studies with Freund's adjuvant have indicated complete protection against lethal challenge in mice and superior protection against virulent infection in Aotus monkeys. To prepare for clinical trials of the AMA1-RON2L complex, identity and integrity of the candidate vaccine must be assessed, and characterization methods must be carefully designed to not dissociate the delicate complex during evaluation. In this study, we developed a native Tris-glycine gel method to separate and identify the AMA1-RON2L complex, which was further identified and confirmed by Western blotting using anti-AMA1 monoclonal antibodies (mAbs 4G2 and 2C2) and anti-RON2L polyclonal Ab coupled with mass spectrometry. The formation of complex was also confirmed by Capillary Isoelectric Focusing (cIEF). A short-term (48 h and 72 h at 4°C) stability study of AMA1-RON2L complex was also performed. The results indicate that the complex was stable for 72 h at 4°C. Our research demonstrates that the native Tris-glycine gel separation/Western blotting coupled with mass spectrometry and cIEF can fully characterize the identity and integrity of the AMA1-RON2L complex and provide useful quality control data for the subsequent clinical trials.

Native fluorescence detection with a laser driven light source for protein analysis in capillary electrophoresis

While ultraviolet light (UV) absorbance detection is the most widely used detection mode in capillary electrophoresis (CE), it can yield poor concentration sensitivity and has tendencies to exhibit baseline fluctuations. In order to overcome these challenges, alternative detection strategies, including the use of dedicated wavelength lasers, have been applied, resulting in enhancements of concentration sensitivity as well as decreased baseline disturbance. In this work, using a laser driven light source for excitation, we reported a native fluorescence detection (NFD) scheme for use in a commercial CE platform, PA 800 Plus Pharmaceutical Analysis System, for protein analysis. The CE-NFD system was characterized using tryptophan and a reduced IgG. We compared NFD with UV absorbance detection as applied to sodium dodecyl sulfate-capillary gel electrophoresis (SDS-CGE) and capillary isoelectric focusing (cIEF). In SDS-CGE, with the reported NFD a non-reduced IgG standard sample yielded a signal-to-noise ratio which was 14.6 times higher than with UV absorbance detection at 214 nm. In cIEF analysis of NISTmAb, Humanized IgG1_k, with NFD ∼170 times less sample mass was needed to obtain similar profile quality to that with UV absorbance detection at 280 nm. NFD also eliminated baseline anomalies observed with UV absorbance detection and showed less interference by other absorbing species. These results suggest that CE-NFD is a practical and powerful tool for protein characterization in the biopharmaceutical industry.

Isoforms analysis of recombinant human erythropoietin by polarity-reversed capillary isoelectric focusing

Recombinant human erythropoietin (rhuEPO) has been extensively used as a pharmaceutical product for treating anemia in the clinic. Glycosylation of rhuEPO was crucial for affecting biological activity, immunogenicity, and pharmacokinetics. Because of the heterogeneity of glycan, the structure of rhuEPO was complex with several isoforms. Characterization of isoforms was important for quality control of rhuEPO. Here, an improved cIEF method has been established and validated. A polarity-reversed focusing step was used by reversing both the polarity of the voltage and the catholyte and anolyte vials. A weak base (100 mM ammonium hydroxide solution) was used as a chemical mobilizer to make the acidic bands mobilize stably to the detection window. Compared with CZE method in European Pharmacopoeia, the numbers of isoforms and their peak area percentage were highly consistent. Better reproducibility and higher resolution have been obtained by the improved cIEF method. Moreover, in improved cIEF method, the isoelectric points (pI) of each isoform can be calculated and used for identification. It was also the first time that the cIEF method was fully validated for rhuEPO analysis according to the International Conference on Harmonization (ICH) guidelines.

Development of a multichannel microfluidic system with Schlieren imaging microscopy for online chip-based moving boundary electrophoresis

The concentration gradient detection method based on the Schlieren optics employed for electrophoresis analyses by extending the technology to a multi-channel system using a prototyped microfluidic chip (thinXXS Micro-technology, Germany). The results prove that coupling a chip-based microfluidic device with Schlieren detection is an appropriate approach to improve the electrophoretic separations. The effects of channel's geometry and dimension were investigated by conducting the experiments in channels with different cross sectional areas. Fast kinetic data acquisition of the charge-coupled device (CCD) camera facilitated recording of a time sequence of optical images, demonstrating the potential of the CCD camera as a powerful tool for studying dynamic processes such as diffusion. Diffusion coefficients of sample proteins were measured under static and dynamic conditions, where the static mode demonstrated more accurate results. Furthermore, the Fourier transformation was employed to improve the Schlieren images for quantitative analysis of the diffusion coefficient measurement.

Kinase-Associated Phosphoisoform Assay: a novel candidate-based method to detect specific kinase-substrate phosphorylation interactions in vivo

BACKGROUND

Protein kinases are important components of signalling pathways, and kinomes have remarkably expanded in plants. Yet, our knowledge of kinase substrates in plants is scarce, partly because tools to analyse protein phosphorylation dynamically are limited. Here we describe Kinase-Associated Phosphoisoform Assay, a flexible experimental method for directed experiments to study specific kinase-substrate interactions in vivo. The concept is based on the differential phosphoisoform distribution of candidate substrates transiently expressed with or without co-expression of activated kinases. Phosphorylation status of epitope-tagged proteins is subsequently detected by high-resolution capillary isoelectric focusing coupled with nanofluidic immunoassay, which is capable of detecting subtle changes in isoform distribution.

RESULTS

The concept is validated by showing phosphorylation of the known mitogen-activated protein kinase (MAPK) substrate, ACS6, by MPK6. Next, we demonstrate that two transcription factors, WUS and AP2, both of which are shown to be master regulators of plant development by extensive genetic studies, exist in multiple isoforms in plant cells and are phosphorylated by activated MAPKs.

CONCLUSION

As plant development flexibly responds to environmental conditions, phosphorylation of developmental regulators by environmentally-activated kinases may participate in linking external cues to developmental regulation. As a counterpart of advances in unbiased screening methods to identify potential protein kinase substrates, such as phosphoproteomics and computational predictions, our results expand the candidate-based experimental toolkit for kinase research and provide an alternative in vivo approach to existing in vitro methodologies.

Evaluation of the V8 E-Class, a Novel Automated Capillary Isoelectric Focusing Instrument for Hemoglobinopathy Screening

OBJECTIVES

We evaluated the performance of a novel capillary isoelectric focusing (CIEF) application for hemoglobinopathy screening on the recently introduced V8 E-Class platform.

METHODS

Analytical performance of the V8 E-Class was evaluated and included assessment of hemoglobin A2 (HbA2) imprecision; linearity for HbA2, fetal hemoglobin (HbF), and sickle hemoglobin (HbS); and carryover for HbS. Furthermore, a method comparison with the Minicap Flex Piercing (Sebia, Lisses, France), the Variant Classic (Bio-Rad Laboratories, Hercules, CA), and the G8 (Tosoh Europe, Amsterdam, the Netherlands) was done to assess analytical and clinical concordance.

RESULTS

Total HbA2 imprecision was 3.26% and 3.14% for normal and elevated HbA2 controls and 5.16% and 3.58% for a normal and a heterozygous HbS patient sample, respectively. HbA2, HbF, and HbS showed acceptable linearity, and no carryover was observed. The method comparison showed good analytical concordance (r > 0.95) except for a homozygous HbS subset (r = 0.532-0.704). A comparable phenomenon was seen for the clinical concordance with good agreement in samples without variants (weighted κ > 0.80) but poorer agreement in HbS samples (κ < 0.30).

CONCLUSIONS

Good analytical performance was demonstrated for this novel CIEF application for hemoglobinopathy screening. Method comparison showed generally good correlation but highlights the need for standardization. Finally, software optimization could further add to its use for routine hemoglobinopathy screening.

Cutting-edge capillary electrophoresis characterization of monoclonal antibodies and related products

Out of all categories, monoclonal antibodies (mAbs), biosimilar, antibody-drug conjugates (ADCs) and Fc-fusion proteins attract the most interest due to their strong therapeutic potency and specificity. Because of their intrinsic complexity due to a large number of micro-heterogeneities, there is a crucial need of analytical methods to provide comprehensive in-depth characterization of these molecules. CE presents some obvious benefits as high resolution separation and miniaturized format to be widely applied to the analysis of biopharmaceuticals. CE is an effective method for the separation of proteins at different levels. capillary gel electrophoresis (CGE), capillary isoelectric focusing (cIEF) and capillary zone electrophoresis (CZE) have been particularly relevant for the characterization of size and charge variants of intact and reduced mAbs, while CE-MS appears to be a promising analytical tool to assess the primary structure of mAbs and related products. This review will be dedicated to detail the current and state-of-the-art CE-based methods for the characterization of mAbs and related products.

CIEF-CZE-MS applying a mechanical valve

Separation and determination of proteins by capillary isoelectric focusing (CIEF) and mass spectrometry (MS) are essential and complementary techniques in the field of bioanalysis. The hyphenation of these two techniques is challenging due to the nonvolatile substances required for the CIEF separation. An additional separation step prior to MS enables the removal of the nonvolatile substances. However, it is complicated due to the small transfer volume and the required high voltages in the CIEF process. In order to remove nonvolatile substances and transfer the analytes toward the mass spectrometer, we applied a four-port valve to couple CIEF online to capillary electrophoresis-mass spectrometry. To demonstrate the power of this concept, hemoglobin and glycated hemoglobin with an isoelectric point difference of 0.037 were separated via isoelectric focusing and characterized by MS. In general, this setup guaranties interference-free mass spectra and will provide an information-rich and sensitive top down protein characterization. Graphical abstract Interference free coupling of capillary isoelectric focusing to mass spectrometry by applying a mechanical valve. The focused proteins were tranferred from the isoelectric focusing to capillary electrophoresis by a mechanical valve. Afterwards, the transferred protein was sepearated from ionization interfering substances in the capillary electrophoresis prior to the mass spectrometry detection.

Separation of Recombinant Therapeutic Proteins Using Capillary Gel Electrophoresis and Capillary Isoelectric Focusing

Detailed step-by-step methods for protein separation techniques based on capillary electrophoresis (CE) are described in this chapter. Focus is placed on two techniques, capillary gel electrophoresis (CGE) and capillary isoelectric focusing (cIEF). CGE is essentially gel electrophoresis, performed in a capillary, where a hydrogel is used as a sieving matrix to separate proteins or peptides based on size. cIEF separates proteins or peptides based on their isoelectric point (pI), the pH at which the protein or peptide bears no charges. Detailed protocols and steps (including capillary preparation, sample preparation, CE separation conditions, and detection) for both CGE and cIEF presented so that readers can follow the described methods in their own labs.

cIEF for rapid pKa determination of small molecules: a proof of concept

A capillary isoelectric focusing (cIEF) method was developed for the determination of the ionization constants (pKa) of small molecules. Two approaches used to decrease the electroosmotic flow (EOF) were compared: (i) a hydroxypropylcellulose (HPC) coated capillary in aqueous medium and (ii) the addition of glycerol to act as a viscosifying agent. The cIEF method with the glycerol medium was selected, and the ionization constants of 22 basic and 21 acidic compounds, including 15 pharmaceutical drugs, were determined, resulting in pKa values from 3.5 to 7.4 and 6.4 to 9.3, respectively. cIEF offers an interesting alternative to other techniques for pKa determination with low sample consumption, high throughput and low cost.

Capillary isoelectric focusing of probiotic bacteria from cow's milk in tapered fused silica capillary with off-line matrix-assisted laser desorption/ionization time-of-flight mass spectrometry identification

In this study, combination of capillary isoelectric focusing (CIEF) in tapered fused silica (FS) capillary with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is presented as an efficient approach for unambiguous identification of probiotic bacteria in real sample. For this purpose, bacteria within genus Lactobacillus were selected as model bioanalytes and cow's milk was selected as a biological sample. CIEF analysis of both the cultivated bacteria and the bacteria in the milk was optimized and isoelectric points characterizing the examined bacteria were subsequently determined independently of the bacterial sample origin. The use of tapered FS capillary significantly enhanced the separation capacity and efficiency of the CIEF analyses performed. In addition, the cell number injected into the tapered FS capillary was quantified and an excellent linearity of the calibration curves was achieved which enabled quantitative analysis of the bacteria by CIEF with UV detection. The minimum detectable number of bacterial cells was 2×10(6) mL(-1). Finally, cow's milk spiked with the selected bacterium was analyzed by CIEF in tapered FS capillary, the focused and detected bacterial cells were collected from the capillary, deposited onto the cultivation medium, and identified using MALDI-TOF MS afterward. Our results have revealed that the proposed procedure can be advantageously used for unambiguous identification of probiotic bacteria in a real sample.