Interference of electrochemical ion diffusion in nanopore sensing

Stable and fast-responding ionic current is a prerequisite for reliable measurements of small objects with a nanopore. Here, we report on the interference of ion diffusion kinetics at liquid-electrode interfaces in nanopore sensing. Using platinum as electrodes, we observed a slow and large decrease in the ionic current through a nanopore in a salt solution suggestive of the considerable influence of the growing impedance at the liquid-metal interfaces via Cottrell diffusion. When detecting nanoparticles, the resistive pulses became weaker following the steady increase in the resistance at the partially polarizable electrodes. The interfacial impedance was also demonstrated to couple with the nanopore chip capacitance thereby degraded the temporal resolution of the ionic current measurements in a time-varying manner. These findings can be useful for choosing the suitable size and material of electrodes for the single-particle and -molecule analyses by ionic current.

•

Ag/AgCl electrodes enable reliable resistive pulse detections of nanoparticles

•

Pt electrodes induce ionic current decay by time via the Cottrell diffusion

•

Cottrell diffusion deteriorates the nanopore sensor temporal resolution

Multidimensional antimony nanomaterials tailored by electrochemical engineering for advanced sodium-ion and potassium-ion batteries

Downsizing the dimensions of materials holds great importance for promoting the alkali-ion storage properties, which is considered to be one of the most efficient methods for improving the cycling stability and rate capability of alloy anodes. Nevertheless, efficient, affordable, and scalable methods to prepare low-dimensional electrode materials are lacking. In this study, we developed a tunable electrochemical strategy for synthesizing multidimensional antimony (Sb) nanomaterials. Depending on different reaction mechanisms in different electrolytes, we fabricated zero-dimensional Sb nanoparticles, two-dimensional (2D) antimonene nanosheets, and a three-dimensional porous Sb network through the electrochemical delamination of bulk Sb in lithium hexafluorophosphate in propylene carbonate, tetraethylammonium hydroxide aqueous solution, and tetraethylammonium hexafluorophosphate in N, N-dimethylformamide, respectively. In the preferred electrolyte, 2D antimonene nanosheets deliver a large sodium storage capacity of 572.5 mAh g^-1 after 200 cycles at 0.2 A g^-1 and an excellent rate capability of 553.6 mAh g^-1 at 5 A g^-1. When used as anode materials for potassium-ion batteries, we obtained a high capacity of 550.3 mAh g^-1 after 300 cycles, and observed a high rate capability of 302.3 mAh g^-1 at 4 A g^-1. These results provide an easy and tunable strategy for designing high-performance low-dimensional materials for next-generation batteries.

Electrocoagulation treatment of high saline oily wastewater: evaluation and optimization

The present work provides to treat real oily saline wastewater released from drilling oil sites by the use of electrocoagulation technique. Aluminum tubes were utilized as electrodes in a concentric manner to minimize the concentrations of 113400 mg TDS/L, 65623 mg TSS/L, and the ions of 477 mg HCO₃/L, 102000 mg Cl/L and 5600 mg Ca/L presented in real oily wastewater under the effect of the operational parameters (the applied current and reaction time) by making use of the central composite rotatable design. The final concentrations of TDS, TSS, HCO₃, Cl, and Ca that obtained were 93555 ppm (17.50%), 11011 ppm (83.22%), 189ppm (60.38%), 80000ppm (22%), and 4200 ppm (25%), respectively, under the optimum values of the operational parameters (1.625 Amps and 40 min). In spite of the low removal percentages of some pollutants, the present study proved the ability of this novel designed reactor for treating high saline real oily wastewater in accordance with the operational parameters. This prove the capability of the use of it as a pre-treatment of other conventional methods.

Green corrosion inhibition and adsorption characteristics of Luffa cylindrica leaf extract on mild steel in hydrochloric acid environment

The corrosion inhibition of Luffa cylindrica Leaf Extract (LCLE) was investigated using gravimetric, depth of attack and surface analysis techniques. Effect of inhibitor concentrations (0.50-1.00 g/l), temperatures (30-60 °C) and immersion time (4-12 h) was studied on the Inhibition Efficiency (IE) of the extract on Mild Steel (MS) immersed in a 0.5 M HCl solution. The constituents of the proposed inhibitor were identified by using a GC-MS. The media solutions and adsorbed film on MS were characterized using FTIR Spectrophotometer. SEM microgram and surface tester were applied for studying surface morphology and depth of attack profile. The optimum IE of 87.89% was obtained. The LCLE adsorption on MS followed Langmuir isotherm and pseudo-second-order adsorption kinetics. Activation energy (28.71 kJ/mol), entropy (- 0.15 kJ/mol. K), average enthalpy (-28.00 kJ/mol) and Gibbs free energy (-11.43 kJ/mol) obtained at optimum condition indicate exothermic process and physical adsorption mechanism. The result obtained in this study compared well with many reported green inhibitors for MS corrosion.

Morphology study of zinc anode prepared by electroplating method for rechargeable Zn-MnO2 battery

Zinc electrodes prepared by electrodepositing zinc on a copper plate in ZnSO₄ electrolyte were studied to determine the most suitable condition of zinc anode preparation for high performance Zn-MnO₂ battery. Deposition of zinc on substrate material was confirmed using X-ray diffraction (XRD) measurement. Morphological characterization of zinc anode was performed by scanning electron microscopy (SEM). It was observed that concentration of electrolyte and electrical current density influenced the morphology of zinc electrode. At 1 M ZnSO₄ and current density values of 0.06–0.1 A/cm², it was found that the morphological structure of zinc electrode was orderly arranged in a layer-by-layer structure. This indicated that the current density played an important role on deposition morphology and even on the crystal structure. Performance of electrodes was tested by a battery analyzer for 100 cycles. The results of the tests showed that the electrode with the layer-by-layer morphology yielded a high efficiency of up to 99.97% which was higher and more stable than those of the electrodes with disordered and scattered morphology. The layer-by-layer morphology is therefore a key factor for improving the performance of Zn-MnO₂ cell.