Effect of pre-treatments and frying conditions on the formation of starch-lipid complex in potato starch chips during deep-frying process

This study examined the influence of various pretreatment methods, frying durations, and temperatures, as well as the type of frying oil, on the formation and structure of starch-lipid complexes in fried potato chips. Potato starch was processed into dough, sliced, and subjected to deep frying following various pretreatments. Structural analysis showed that steaming as a pretreatment facilitated the generation of V-type starch-lipid complexes, whereas resistant starch type III (RS3) materialized in the desiccated samples instead of the anticipated complexes. The rate of starch-lipid complex formation initially surged but subsequently declined as treatment time increased. A reduction in treatment temperature from 190 °C to 170 °C was conducive to complex formation. Moreover, the maximum relative crystallinity (19.74 %) and ΔH value (7.76 J/g) were recorded for potato starch slices pretreated by steaming and frying in palm oil. Rapeseed oil, which is rich in unsaturated fatty acids (89.98 %), inhibits complex formation. The study concludes that pretreatment methods exert a substantial effect on the formation of starch-lipid complexes and that extended frying duration and elevated temperature may reduce this formation. Oils with longer-chain fatty acids and a lower degree of unsaturation were favorable for complex formation.

Order matters: Methods for extracting cellulose from rice straw by coupling alkaline, ozone and enzymatic treatments

Rice straw is a widely produced residue that can be converted into value-added products. This work aimed at using greener processes combining mild alkali (A), ozone (O) and enzymatic (engineered xylanase) (E) treatments to extract cellulose and other value-added compounds from rice straw and to evaluate the effects of the order of the treatments. Solid (S) and liquid (L) fractions from the process were collected for physicochemical characterization. AOE treatment showed the best capacity to extract high purity cellulose and other valuable compounds. The lignin content was significantly decreased independently of the order of the treatments and, its content in the extract obtained after the AOE process was lower than the one obtained after the OAE process. Moreover, thermal stability of the samples increased after the enzymatic process, being higher in SAOE. The alkaline treatment increased the hemicellulose and polyphenol content (antioxidant activity) in the liquid fractions (LA and LOA). In contrast, the ozonized liquid fractions had lower polyphenol content. Therefore, alkali was fundamental in the process. In conclusion, the AOE strategy could be a more environmentally friendly method for extracting cellulose and other valuable compounds, which could be used to develop active materials in the future.

Novel multiplexed alkali enzyme lysis coupled with EDTA pretreatment for RNA virus extraction from wastewater sludge: Optimization, recovery, and detection

RNA viruses are readily enriched in wastewater sludge owing to adsorption by extracellular polymeric substances (EPS) during wastewater treatment, causing pathogenicity. However, conventional wastewater extraction methods often fail to fully extract these viruses from sludge. In this study, three methods: enzymatic (ENP), alkaline (ALP), and ethylenediaminetetraacetic acid (EDTA) pretreatments were applied to sludges and promote the RNA virus extraction from sludge. Our results show that the total recovery rate of RNA viruses increased by 87.73% after ENP pretreatment, whereas ALP pretreatment inhibited virus extraction. The highest recovery rate of viruses from sludge, reaching 296.80%, was achieved with EDTA pretreatment (EDP) coupled with ENP. Notably, the most significant increase was observed in the abundance of Astroviruses, which increased from 7.60 × 107 to 7.86 × 108 copies/g TSS after EDP + ENP treatment. Our investigations revealed that virus extraction was affected by a class of short-wavelength protein substances, as opposed to tryptophan or tyrosine, which were eluted by proteins with beef paste buffer by substitution after EDP + ENP treatment. The results of this study provide essential insights for sludge-based epidemiology with the required sensitivity for managing the extraction of RNA epidemic viruses to control viral transmission.

Colour, nutritional composition and antioxidant properties of dehydrated carrot (Daucus carota var. sativus) using solar drying techniques and pretreatments

Carrot is a seasonal perishable tuberous root vegetable which presents a preservation challenge owing to its elevated moisture content. Recently, carrot processing has received more attention because of its many health-promoting qualities and the reduction of postharvest losses in a cost-effective safe way. This study was designed to sort out the effective solar drying technique including pre-treatment that would retain the color and quality characteristics of dehydrated carrot. Carrot slices were subjected to dry using open sun drying (D1), solar drying long chimney (D2), solar drying short chimney (D3) and box solar drying (D4) techniques with the pretreatments of ascorbic acid 1 % (C3), citric acid 5 % (C4), potassium metabisulfite 1 % (C5) and potassium sodium tartrate 0.3 % (C6) before drying. Drying characteristics, nutritional attributes, phytochemicals and antioxidant of the dehydrated carrot samples were compared with the fresh sample and untreated (control) sample. Results showed that D4 was a good drying method to preserve nutritional quality with good appearance. Among the pretreatments, C5 and C4 resulted improved nutritional quality retention, enhanced visual acceptability and enriched antioxidant activities. PCA (Principal Component Analysis) and correlation matrix revealed that D4 with C5 retained the maximum amount of vitamin, minerals, total phenolic content, antioxidant and admirable dehydrated carrot color by inactivating enzymatic reaction. Therefore, box solar drying with potassium metabisulfite pretreatment would be very promising for functional carrot drying retaining acceptable color and nutrition composition.

Impact of natural degradation of the invasive alga Rugulopteryx okamurae on anaerobic digestion: Heavy metal pollution and kinetic performance

This study shows, for the first time, how the natural biodegradation of the Phaeophyceae Rugulopteryx okamurae (R.o.) affects its methane yield, by biochemical methane potential assays, and the methane production kinetics. Additionally, a mechanical (zeolite-assisted milling) and a thermal (120 °C, 45 min) pretreatments were assessed. The highest methane yield was obtained from the mechanically pretreated fresh ashore biomass (219 (15) NLCH4 kgVS-1), which presents the use of zeolite during milling as an economical alternative for heavy metal toxicity reduction. Moreover, no significant differences were observed between the other tests (with the exception of the lowest value obtained for the mechanically pretreated fresh R.o.). Low methane yields were linked to the heavy metal content. However, an increase of 28.5 % and 20.0 % in the k value was found for the untreated fresh R.o. biomass and fresh ashore biomass, respectively, when subjected to thermal pretreatment. Finally, an enhancement of 80.5 % in the maximum methane production rate was obtained for the fresh ashore biomass milled with zeolite compared to the untreated fresh ashore biomass.

Multiple strategies for the development of multienzyme complex for one-pot reactions

The main intention in the modern era is to make life and activities on earth more comfortable by adding necessary products through biological machinery. Millions of tons of biological raw materials and lignocellulosic biomass are wasted by burning each year without providing benefits to living organisms. Instead of being the cause of disturbing the natural environment by increasing global warming and pollutants worldwide, now, it is the need of the hour to develop an advanced strategy to utilize these biological raw materials to produce renewable energy resources to meet the energy crisis. The review presents the idea of multiple enzymes in one step to hydrolyze complex biomaterials into useful products. The paper discusses how multiple enzymes are arranged in a cascade for complete hydrolysis of raw material in one-pot to prevent multistep, time consuming, and expensive methods. Furthermore, there was the immobilization of multiple enzymes in a cascade system with in vitro and in vivo conditions for reusability of enzymes. The role of genetic engineering, metabolic engineering, and random mutation techniques is described for the development of multiple enzyme cascades. Techniques that are involved in the improvement of native strain to recombinant strain for the enhancement of hydrolytic capacity were used. The preparative steps, before enzymatic hydrolysis like acid, and base treatment methods are more effective for improving the hydrolysis of biomass by multiple enzymes in a one-pot system. Finally, the applications of one-pot multienzyme complexes in biofuel production from lignocellulosic biomass, biosensor production, medicine, food industry, and the conversion of biopolymers into useful products are described.

Effect of acidic pretreatment on the microstructural arrangement and anaerobic digestion of Arachis hypogea shells; and process parameters optimization using response surface methodology

Enzymatic hydrolysis of lignocellulose feedstocks has been observed as the rate-limiting stage during anaerobic digestion. This necessitated the need for pretreatment before anaerobic digestion for an effective and efficient process. Therefore, this study investigated the impact of acidic pretreatment on Arachis hypogea shells, and different conditions of H₂SO₄ concentration, exposure time, and autoclave temperature were considered. The substrates were digested for 35 days at a mesophilic temperature to assess the impact of pretreatment on the microstructural organization of the substrate. For the purpose of examining the interactive correlations between the input parameters, response surface methodology (RSM) was used. The result reveals that acidic pretreatment has the strength to disrupt the recalcitrance features of Arachis hypogea shells and make them accessible for microorganisms' activities during anaerobic digestion. In this context, H₂SO₄ with 0.5% v. v^-1 for 15 min at an autoclave temperature of 90 °C increases the cumulative biogas and methane released by 13 and 178%, respectively. The model's coefficient of determination (R²) demonstrated that RSM could model the process. Therefore, acidic pretreatment poses a novel means of total energy recovery from lignocellulose feedstock and can be investigated at the industrial scale.

Influence of convective hot air drying on physico-functional, thermo-pasting and antioxidant properties of elephant foot yam powder (Amorphophallus paeoniifolius)

The present study focused on the effect of different drying temperatures (40, 50, 60 and 70 °C) and combination of pre-treatments: potassium metabisulphite (KMS), potassium metabisulphite + Citric acid + blanching (KCB)] on functional, thermo-pasting and antioxidant properties of elephant foot yam (EFY) powder. Drying temperature and pretreatment reduces the water and oil absorption capacity, and the highest values were 2.34 g/g and 1.19 g/g for drying at 40 °C for the untreated sample, respectively. KMS pretreatment enhanced the bulk density, foaming capacity, emulsion capacity, and emulsion stability with an increase in drying temperature. Pasting temperature and viscosity decreased with an increase in drying temperature, and the maximum was observed at 40 °C for KMS pretreatment. Blanching increases the gelatinization temperature resulting in higher mid-and end-temperatures for KCB pretreatment. The antioxidant properties decreased with an increase in the drying temperature and were found to be minimal in the case of KCB treated samples.

Lignocellulosic biomass conversion via greener pretreatment methods towards biorefinery applications

Lignocellulose biomass during pretreatment releases various compounds, among them the most important is reducing sugars, which can be utilized for the production of biofuels and some other products. Thereby, innovative greener pretreatment techniques for lignocellulosic materials have been considered to open a new door in the aspects of digestibility of the rigid carbohydrate-lignin matrix to reduce the particle size and remove hemicellulose/lignin contents to successfully yield valid bioproducts. This article reviews about the composition of lignocelluloses and emphasizes various green pretreatments viz novel green solvent-based IL and DES steam explosion, supercritical carbon dioxide explosion (Sc-CO2) and co-solvent enhanced lignocellulosic fractionation (CELF) along with suitable mechanistic pathway of LCB pretreatment process. Finally, this article concludes that the existing pretreatments should be redesigned to conquer the demands by large scale production and suggests combined pretreatment methods to carry out various biomass pre-processing.

Distinct effects of typical sludge pretreatment approaches on the antibiotic resistance genes variations, associated bacterial community dynamics and metabolic activities during anaerobic fermentation process

Anaerobic fermentation is effective for waste activated sludge (WAS) disposal to realize resource generation and pollutants reduction, and various pretreatments were commonly applied to improve the performance. This work mainly investigated the effects of typical WAS pretreatment approaches on the antibiotic resistance genes (ARGs, as emerging contaminants) removal during anaerobic fermentation processes and unveiled the underlying mechanisms. The results indicated that all the pretreatment strategies exhibited evident effects on the overall ARGs removal with the order of Fe²⁺ activated persulfate (PS/Fe²⁺) > pH 10 > Ultrasonication > Heat, and showed selective removal tendency for the specific ARGs (namely easily removed (aadA1 and sul1) and persistent ARGs). Mechanistic analysis demonstrated that the pretreatments disrupted the extracellular polymeric substances (EPS) and rose the cell membrane permeability (particularly for PS/Fe²⁺ and Heat). Then the increased ARGs release benefitted the subsequent reduction of mobile genetic elements (MGEs) and extracellular ARGs (especially for PS/Fe²⁺ and pH10), resulting the ARGs attenuation. Pretreatments significantly shifted the microbial community structure and the abundances of potential ARGs hosts (i.e., Sulfuritalea, and Denitratisoma). Also, the different pretreatments exhibited distinct effects on the microbial metabolic traits related with ARGs proliferation (i.e., ABC transporters, two-component system and bacterial secretion systems), which also contributed to the ARGs attenuations during WAS fermentation. The partial least-squares path modeling (PLS-PM) analysis indicated that the bacterial community (total effects = 0.968) was key factor determining ARGs fates.

Biobutanol production from sustainable biomass process of anaerobic ABE fermentation for industrial applications

The growing population increases the need to develop advanced biological methods for utilizing renewable and sustainable resources to produce environmentally friendly biofuels. Currently, energy resources are limited for global demand and are constantly depleting and creating environmental problems. Some higher chain alcohols, like butanol and ethanol, processing similar properties to gasoline, can be alternate sources of biofuel. However, the industrial production of these alcohols remains challenging because they cannot be efficiently produced by microbes naturally. Therefore, butanol is the most interesting biofuel candidate with a higher octane number produced naturally by microbes through Acetone-Butanol-Ethanol fermentation. Feedstock selection as the substrate is the most crucial step in biobutanol production. Lignocellulosic biomass has been widely used to produce cellulosic biobutanol using agricultural wastes and residue. Specific necessary pretreatments, fermentation strategies, bioreactor designing and kinetics, and modeling can also enhance the efficient production of biobutanol. The recent genetic engineering approaches of gene knock in, knock out, and overexpression to manipulate pathways can increase the production of biobutanol in a user friendly host organism. So far various genetic manipulation techniques like antisense RNA, TargeTron Technology and CRISPR have been used to target Clostridium acetobutylicum for biobutanol production. This review summarizes the recent research and development for the efficient production of biobutanol in various aspects.

Deciphering the impacts of composition of extracellular polymeric substances on sludge dewaterability: An often overlooked role of amino acids

An investigation was conducted for waste activated sludge pretreated by different methods (e.g., ultrasonic, thermal, ozone, and acid/alkaline) in order to establish correlations between amino acids and parameters related to sludge dewaterability (e.g., capillary suction time (CST), specific resistance to filtration (SRF), proteins (PN) and polysaccharides (PS) in different fractions of extracellular polymeric substances (EPS), zeta potential, and particle sizes). The results indicated that glycine, serine, and threonine were the key identified amino acids correlated with parameters related to sludge dewaterability. To be exemplified, glycine showed positive correlations with the normalized CST (regression coefficient (R) = 0.72, p < 0.05), the normalized SRF (R = 0.74, p < 0.05), PN in soluble EPS (R = 0.89, p < 0.05), PS in soluble EPS (R = 0.56, p < 0.05), tryptophan-like PN in soluble EPS (R = 0.60, p < 0.05), and tryptophan-like PN in loosely-bound EPS (R = 0.58, p < 0.05). After adding extra glycine, serine, and threonine into sludge samples, sludge dewaterability was deteriorated. The hydrophilic functional groups of CO and C-OH were found to be more predominant in sludge with the presence of these amino acids. The Lewis acid-base interaction predominated in determining the net attraction among sludge flocs. Moreover, the presence of glycine, serine, and threonine resulted in high repulsive hydrophilic interaction, which deteriorated sludge dewaterability. This study emphasized the importance of amino acids in sludge dewatering and amino acids might be incorporated into parameters reflecting sludge dewaterability.

Optimization of biogas yield from lignocellulosic materials with different pretreatment methods: a review

Population increase and industrialization has resulted in high energy demand and consumptions, and presently, fossil fuels are the major source of staple energy, supplying 80% of the entire consumption. This has contributed immensely to the greenhouse gas emission and leading to global warming, and as a result of this, there is a tremendous urgency to investigate and improve fresh and renewable energy sources worldwide. One of such renewable energy sources is biogas that is generated by anaerobic fermentation that uses different wastes such as agricultural residues, animal manure, and other organic wastes. During anaerobic digestion, hydrolysis of substrates is regarded as the most crucial stage in the process of biogas generation. However, this process is not always efficient because of the domineering stableness of substrates to enzymatic or bacteria assaults, but substrates' pretreatment before biogas production will enhance biogas production. The principal objective of pretreatments is to ease the accessibility of the enzymes to the lignin, cellulose, and hemicellulose which leads to degradation of the substrates. Hence, the use of pretreatment for catalysis of lignocellulose substrates is beneficial for the production of cost-efficient and eco-friendly process. In this review, we discussed different pretreatment technologies of hydrolysis and their restrictions. The review has shown that different pretreatments have varying effects on lignin, cellulose, and hemicellulose degradation and biogas yield of different substrate and the choice of pretreatment technique will devolve on the intending final products of the process.

Enhanced lignocellulosic component removal and biomethane potential from chestnut shell by a combined hydrothermal-alkaline pretreatment

This study proposes new perspectives for the management and biorefinery of wastes deriving from the agri-food sector such as chestnut shell (CS), which was here used as an organic feedstock for biomethane production through anaerobic digestion (AD). 1-5% alkaline (i.e. NaOH and KOH), hydrothermal (i.e. at 100 °C) and combined hydrothermal-alkaline pretreatments were employed to enhance the CS biodegradability prior to biochemical methane potential (BMP) tests conducted under mesophilic conditions. The hydrothermally-pretreated CS with 3% NaOH achieved the highest biomethane yield of 253 (±9) mL CH₄·g VS^-1 coupled to a volatile solid reduction of 48%. The hydrothermal-alkaline pretreatment positively affected both delignification and hemicellulose polymerization, promoting an approximately 2.4-fold higher substrate biodegradability compared to the untreated CS, which only reached a CH₄ production of 104 (±5) mL CH₄·g VS^-1. AD proceeded via volatile fatty acid accumulation, subsequently followed by methane production that was effectively simulated via the modified Gompertz kinetic having a R² of 0.974-0.999. Among the physical-chemical parameters characterizing the CS, the soluble chemical oxygen demand (sCOD) was highly correlated with the BMP showing a Pearson coefficient of 0.952. The cumulative biomethane yield, the sCOD and the cellulose, hemicellulose and lignin amount of CS were also processed through the least square method, obtaining a useful regression equation to predict the BMP. The economic assessment indicated that the hydrothermal-alkaline pretreatment is a cost-effective method to improve the BMP of CS, also for future full-scale applications.

Brewer's spent grain as a no-cost substrate for polyhydroxyalkanoates production: Assessment of pretreatment strategies and different bacterial strains

Polyhydroxyalkanoates (PHAs) are polyesters of significant interest due to their biodegradability and properties similar to petroleum-derived plastics, as well as the fact that they can be produced from renewable sources such as by-product streams. In this study, brewer's spent grain (BSG), the main by-product of the brewing industry, was subjected to a set of physicochemical pretreatments and their effect on the release of reducing sugars (RS) was evaluated. The RS obtained were used as a substrate for further PHA production in Burkholderia cepacia, Bacillus cereus, and Cupriavidus necator in liquid cultures. Although some pretreatments proved efficient in releasing RS (acid-thermal pretreatment up to 42.1 gRS L^-1 and 0.77 gRS g^-1 dried BSG), the generation of inhibitors in such scenarios likely affected PHA production compared with the process run without pretreatment (direct enzymatic hydrolysis of BSG). Thus, the maximum PHA accumulation from BSG hydrolysates was found in the reference case with 0.31 ± 0.02 g PHA per g cell dried weight, corresponding to 1.13 ± 0.06 g L^-1 and a PHA yield of 23 ± 1 mg g^-1 BSG. It was also found that C. necator presented the highest PHA accumulation of the tested strains followed closely by B. cepacia, reaching their maxima at 48 h. Although BSG has been used as a source for other bioproducts, these results show the potential of this by-product as a no-cost raw material for producing PHAs in a waste valorization and circular economy scheme.

Recent trends on seaweed fractionation for liquid biofuels production

Concerns about fossil fuels depletion has led to seek for new sources of energy. The use of marine biomass (seaweed) to produce biofuels presents widely recognized advantages over terrestrial biomasses such as higher production ratio, higher photosynthetic efficiency or carbon-neutral emissions. In here, interesting seaweed sources as a whole or as a residue from seaweed processing industries for biofuel production were identified and their diverse composition and availability compiled. In addition, the pretreatments used for seaweed fractionation were thoroughly revised as this step is pivotal in a seaweed biorefinery for integral biomass valorization and for enabling biomass-to-biofuel economic feasibility processes. Traditional and emerging technologies were revised, with particular emphasis on green technologies, relating pretreatment not only with the type of biomass but also with the final target product(s) and yields. Current hurdles of marine biomass-to-biofuel processes were pinpointed and discussed and future perspectives on the development of these processes given.

Using EEM-PARAFAC to probe NF membrane fouling potential of stabilized landfill leachate pretreated by various options

Pretreatment processes substantially modify the organic composition of landfill leachate, which affect the fouling behavior in the post-treatment of membrane filtration. In this study, the changes in the chemical composition of stabilized landfill leachate upon various pretreatments, which encompassed coagulation/flocculation (C/F), ion exchange resins (MIEX), granular activated carbon (GAC) adsorption, and their combinations, were tracked via excitation emission matrix - parallel factor analysis (EEM-PARAFAC), and the membrane fouling potentials were assessed in the subsequent processes of nanofiltration (NF). Fluorescence components, fulvic-like (C1), protein-like (C2), and humic-like (C3), were identified and validated using EEM-PARAFAC. MIEX and C/F pretreatments were not effective to remove C1 and C2, which were associated with relatively small sized and hydrophilic molecules. GAC adsorption did not show any preference with the removal towards different components. These differences in the chemical heterogeneity among the variously pretreated leachates led to the discrepancies in membrane fluxes at a similar leachate concentration. The result also signified the importance of probing the chemical composition of pretreated leachate for the optimization of the post membrane filtration. The sum of C2 and C3 in the pretreated leachate showed a good correlation with reversible membrane fouling resistance (r = 0.93; p < 0.05), while C1 was highly correlated with irreversible membrane resistance (r = 0.872; P < 0.05). These findings provided a new insight into the applicability of fluorescence spectroscopy for tracking the changes in the membrane fouling potential of stabilized landfill leachate after various pretreatments.

Non-thermal plasma and ultrasound-assisted open lactic acid fermentation of distillery stillage

Stillage is the main by-product of bioethanol production and the cost of its treatment significantly affects the economy of bioethanol production. A process of thermal sterilization before lactic acid fermentation (LAF) is energy demanding and is causing deterioration of valuable compounds in stillage. In this study, ultrasound (UT) and plasma (PT) treatments were used for microbial inactivation, and a significant reduction in the number of viable microorganisms in the stillage after PT and UT was observed. After application of treatment, LAF by Lactobacillus rhamnosus ATCC 7469 was initiated. The concentration of LA is used to quantify the efficiency of the stillage revalorization. The highest LA productivity of 1.21 g/Lh and yield of 0.82 g/g were obtained after PT, while UT of 10 min provided productivity of 1.02 g/Lh and LA yield of 0.69 g/g. The results were benchmarked against closed LAF. Around 20% better revalorization of stillage by PT was achieved when compared with conventional sterilization. In addition, an excellent L (+) LA stereoselectivity of 95.5% was attained after PT. From the aspect of energy efficiency, that of PT was three times lower than UT and almost ten times lower than thermal sterilization, but it is the most expensive due to the high consumption of gas which could reduce application of closed Ar atmosphere on larger scales. This way, a simpler and energy efficient process for LA production on stillage was accomplished by "open" fermentation.

Effects of different pretreatments and proteases on recovery, umami taste compound contents and antioxidant potentials of Labeo rohita head protein hydrolysates

Effects of the pretreatments namely heating, microwave (MW), and ultrasound (US), followed by the enzymatic hydrolysis using different proteases (flavourzyme, neutrase, and protamex) on the protein recovery, umami taste compound content, and antioxidant activities of the Labeo rohita head (LRH) protein hydrolysate was investigated. US and MW pretreatments increased the protein recovery, MSG-like amino acid and flavour 5'-nucleotide contents, equivalent umami concentration (EUC) and antioxidant activities of LRH protein hydrolysates significantly (p < 0.05). The type of enzyme influenced the protein recovery and EUC significantly but did not influence the flavour 5'-nucleotide content of LRH protein hydrolysate (p > 0.05). The highest recovery yield of LRH protein hydrolysate (69.75%) was obtained with the MW pretreatment followed by the protamex hydrolysis, while the highest EUC (41.82 g monosodium glutamate (MSG)/kg) was yielded with the combination of the US pretreatment and the flavourzyme hydrolysis. These results indicate that US and MW pretreatments can help to enhance the recovery yield, umami taste compound content and antioxidant activities of the LRH protein hydrolysate.

Enzymatic hydrolysis of brewer's spent grain to obtain fermentable sugars

Lignocellulosic biomass is a feedstock with the potential to be converted into value-added bioproducts. The use of enzymatic hydrolysis allows the cleavage of lignocellulose into their monomeric units, but there are some drawbacks that make its use in industrial biocatalysis unfeasible. In the present study, we describe the hydrolysis of brewer's spent grain (BSG) with an enzymatic cocktail produced by Aspergillus niger CECT 2700 and its comparison with commercial enzymes. In addition, it was determined whether pretreating the BSG (non-pressurized alkaline hydrolysis or treatment with cholinium glycinate ionic liquid) is necessary. Results show that both pretreatments enhanced xylose release (10.55 ± 0.07 g/L and 8.14 ± 0.13 g/L respectively), meanwhile the hydrolysis of raw BSG with the enzymatic cocktail produced solutions containing high levels of glucose (18.45 ± 1.66 g/L) and xylose (6.38 ± 0.26 g/L).

Enhanced lipid and starch productivity of microalga (Chlorococcum sp. TISTR 8583) with nitrogen limitation following effective pretreatments for biofuel production

•

To enhance the lipid and starch productivity of Chlorococcum sp. TISTR 8583 for biofuel productions.

•

To identify suitable pretreatment strategy for release of fermentable sugars and lipids extraction from algal biomass.

•

To convert the released fermentable sugars and lipids into bioethanol and biodiesel respectively.

The study was conducted to evaluate the conditions to enhance the accumulation of lipids and starch in Chlorococcum sp. TISTR 8583 for the production of biofuel. The Chlorococcum sp. TISTR 8583 was cultivated on BG-11 medium under optimized light intensity. The nitrogen limitation (NL) enhanced the accumulation of both starch and lipids and resulted in 34.02% total sugars as compared to 22.57% on nitrogen supplemented (NS) media only. Similarly, the nitrogen supplemented (NS) media produced 17.05% lipids as compared to 29.59% lipids by NL media. The biomass was investigated for biodiesel and bioethanol production by adopting different pretreatment strategies, such as enzyme, acid and alkaline pretreatments. The alkaline pretreatment was found to be efficient strategy (23.67 wt% sugars/g algal biomass: 1.2% (w/v) at 140 ⁰C for 30 min) while the acid pretreatment (1%: v/v; 140 °C) was least effective pretreatment strategy with the yield of 14.83 wt% sugars/g algal biomass.

Analysis of enzymolysis process kinetics and estimation of the resource conversion efficiency to corn cobs with alkali soaking, water and acid steam explosion pretreatments

This short communication analyzed enzymolysis kinetics and estimated the resource conversion efficiency of corn cobs. Three pretreatments were applied, and enzymatic hydrolysis was performed to obtain solid residues. The enzymolysis process was fit to a modified logistic formula. The kinetics of enzymolysis were similar for all pretreatments, and all kinetics fit the modified logistic formula. Resource conversion efficiency and saccharification efficiency were estimated for the following pretreatments: 69% and 86% for acid steam explosion, 59% and 73% for alkali soaking, 41% and 51% for water steam explosion, respectively. It can be concluded that pretreatment has a minor effect on the enzymolysis process of corn cobs and a greater effect on saccharification efficiency or resource conversion efficiency.

Physico-chemical properties, bioactive compounds and color parameters of coriander puree: effect of pretreatments and freezing

Coriander, one of the most widely utilized herb, is a short duration herb having very short shelf life. The present investigation involved development of an innovative process for enhancing the utilization and the availability of this herb. This process involves pretreatment, blanching and freezing to form ready to use frozen coriander puree tablets. Coriander was subjected to different pretreatments viz. T1: 0.25% potassium metabisulphite, T2: 0.5% citric acid and T3: 0.2% potassium metabisulphite + 0.1% magnesium chloride + 0.1% sodium bicarbonate. The pretreated coriander was blanched in hot water for 2 min and processed into puree having total soluble solids (TSS) as 2.5, 3.5 and 4.5°Brix. Pretreatments significantly affected the all quality parameters except moisture content. TSS had non significant effect on a* value, chroma, pH ascorbic acid and total flavonoid content of processed coriander puree. Coriander puree obtained with T1 pretreatment exhibited better quality than with other pretreatments. T1 pretreated and blanched puree was then frozen in silicon moulds using air blast freezing and deep freezing. Frozen puree tablets were evaluated for quality. The best quality coriander puree obtained from T1 pretreated, blanched puree having TSS 4.5°Brix frozen by continuous air-blast freezing (at a conveyor speed of 4.40 × 10^-3m/s) comparable results to deep freezing having. All quality parameters, except pH, were significantly affected by TSS level of puree as well as different freezing treatments.

Biogas production from different lignocellulosic biomass sources: advances and perspectives

The present work summarizes different sources of biomass used as raw material for the production of biogas, focusing mainly on the use of plants that do not compete with the food supply. Biogas obtained from edible plants entails a developed technology and good yield of methane production; however, its use may not be sustainable. Biomass from agricultural waste is a cheap option, but in general, with lower methane yields than those obtained from edible plants. On the other hand, the use of algae or aquatic plants promises to be an efficient and sustainable option with high yields of methane produced, but it necessary to overcome the existing technological barriers. Moreover, these last raw materials have the additional advantage that they can be obtained from wastewater treatment and, therefore, they could be applied to the concept of biorefinery. An estimation of methane yield per hectare per year of the some types of biomass and operational conditions employed is presented as well. In addition, different strategies to improve the yield of biogas, such as physical, chemical, and biological pretreatments, are presented. Other alternatives for enhanced the biogas production such as bioaugmentation and biohythane are showed and finally perspectives are mentioned.

Influence of pretreatment conditions on lignocellulosic fractions and methane production from grape pomace

The lignocellulosic structure of grape pomace requires the use of pretreatments facilitating microbial decomposition of the matter and enhancing methane production. In this study, the effects of various pretreatments (freezing, alkaline treatment using NaOH and NH₃, acid treatment using HCl, ultrasounds and pulsed electric fields) were examined in batch mode. The highest methane production (0.178Nm³kg^-1 of COD) was attained after alkaline treatment with 10% NaOH w/w dry basis, at 20°C and for 24h. This result is due to the degradation of more than 50% of lignin and about 22% of cellulose present in grape pomace. The coupling of this pretreatment with freezing at -20°C exhibited the highest methane production of 0.2194±0.0007Nm³kg^-1 of COD. When applied to a larger scale continuous digester, this coupled pretreatment increased methane production by about 27%, compared to the untreated samples, promoting the green valorization of the biomass.

Monitoring of full-scale hydrodynamic cavitation pretreatment in agricultural biogas plant

The implementation of hydrodynamic cavitation (HC) pretreatment for enhancing the methane potential from agricultural biomasses was evaluated in a full scale agricultural biogas plant, with molasses and corn meal as a supplementary energy source. HC batch tests were run to investigate the influence on methane production, particle size and viscosity of specific energy input. 470kJ/kgTS was chosen for the full-scale implementation. Nearly 6-months of operational data showed that the HC pretreatment maximized the specific methane production of about 10%, allowing the biogas plant to get out of the fluctuating markets of supplementary energy sources and to reduce the methane emissions. HC influenced viscosity and particle size of digestate, contributing to reduce the energy demand for mixing, heating and pumping. In the light of the obtained results the HC process appears to be an attractive and energetically promising alternative to other pretreatments for the degradation of biomasses in biogas plant.

Evaluation of efficient glucose release using sodium hydroxide and phosphoric acid as pretreating agents from the biomass of Sesbania grandiflora (L.) Pers.: A fast growing tree legume

Sesbania grandiflora (L.) Pers. is one of the fast growing tree legumes having the efficiency to produce around 50tha^-1 above ground dry matters in a year. In this study, biomass of 2years old S. grandiflora was selected for the chemical composition, pretreatments and enzymatic hydrolysis studies. The stem biomass with a wood density of 3.89±0.01gmcm^-3 contains about 38% cellulose, 12% hemicellulose and 28% lignin. Enzymatic hydrolysis of pretreated biomass revealed that phosphoric acid (H₃PO₄) pretreated samples even at lower cellulase loadings [1 Filter Paper Units (FPU)], could efficiently convert about 86% glucose, while, even at higher cellulase loadings (60FPU) alkali pretreated biomass could convert only about 58% glucose. The effectiveness of phosphoric acid pretreatment was also supported by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and Fourier transform infrared spectroscopy (FTIR) analysis.

Chemical composition, pretreatments and saccharification of Senna siamea (Lam.) H.S. Irwin & Barneby: An efficient biomass producing tree legume

Protocols were developed for efficient release of glucose from the biomass of Senna siamea, one of the highly efficient biomass producing tree legumes. Composition of mature, 1year and 2years coppice biomass were analysed. For the hydrolysis of the glucan, two pretreatments, cellulose solvent- and organic solvent-based lignocellulose fractionation (COSLIF) and alkali (sodium hydroxide) were used; COSLIF (85% phosphoric acid, 45min incubation at 50°C) pretreated mature biomass exhibited best result in which 88.90% glucose released after 72h of incubation with the use of 5 filter paper units (FPU) of cellulase and 10 international units (IU) of β-glucosidase per gram of glucan. Of the biomass of different particle sizes (40-200mesh) used for saccharification, 40-60mesh shown the maximum glucose release. COSLIF pretreated mature, 1year and 2years coppice biomass showed equivalent glucose release profiles.

Biomethane potential of industrial paper wastes and investigation of the methanogenic communities involved

BACKGROUND

Cellulose-containing waste products from the agricultural or industrial sector are potentially one of the largest sources of renewable energy on earth. In this study, the biomethane potential (BMP) of two types of industrial paper wastes, wood and pulp residues (WR and PR, respectively), were evaluated under both mesophilic and thermophilic conditions, and various pretreatment methods were applied in the attempt to increase the methane potential during anaerobic digestion. The methanogenic community composition was investigated with denaturing gradient gel electrophoresis (DGGE) and the ANAEROCHIP microarray, and dominant methanogens were quantitated using quantitative PCR.

RESULTS

All pretreatments investigated in this study with the exception of the alkaline pretreatment of PR were found to increase the BMP of two paper industry wastes. However, the low recalcitrance level of the PR resulted in the pretreatments being less effective in increasing BMP when compared with those for WR. These results were supported by the physico-chemical data. A combined application of ultrasound and enzymatic pretreatment was found to be the best strategy for increasing methane yields. The retention time of substrates in the reactors strongly influenced the BMP of wastes subjected to the different pretreatments. In sludges from both paper wastes subjected to the various pretreatments, mixotrophic Methanosarcina species were found to dominate the community, accompanied by a consortium of hydrogenotrophic genera.

CONCLUSIONS

Pretreating industrial paper wastes could be a potentially viable option for increasing the overall degradation efficiency and decreasing reactor retention time for the digestion of complex organic matter such as lignocellulose or hemicellulose. This would help reduce the environmental burden generated from paper production. Although there were minor differences in the methanogenic communities depending on the temperature of anaerobic digestion, there was little effect of substrate and pretreatment type on the community composition. Thus, methanogen community dynamics would not seem to be an appropriate indicator regarding BMP in the AD processes investigated.

Optimization of biogas production from coffee production waste

This study was conducted to investigate the effects of chemical pretreatments on biogas production from coffee waste. After the preparation of a mixture of coffee waste with a TS concentration of 10%w/w, basic and acid pretreatments were conducted in batch mode and their performances were compared with the biogas produced from a mixture without any pretreatment stage. The basic pretreatment demonstrated a very good action on the hydrolysis of the lignin and cellulose, and permitted a biogas production of about 18NL/L with a methane content of almost 80%v/v. Thus, the basic pretreatment has been used to scale-up the process. The coffee refuse was has been carried out in a 45L anaerobic reactor working in continuous mode and in a mesophilic condition (35°C) with a Hydraulic Retention Time (HRT) of about 40days. A high biogas production of 1.14NL/Ld, with a methane percentage of 65%v/v was obtained, thus permitting a process yield of about 83% to be obtained.

Experimental and economical evaluation of bioconversion of forest residues to biogas using organosolv pretreatment

The methane potential of forest residues was compared after applying organic solvent, i.e., acetic acid, ethanol, and methanol pretreatments using batch anaerobic digestion (AD). The pretreatments were performed at 190 °C with 50% (V/V) organic solvent for 60 min. The accumulated methane yields after 40 days of AD from pretreated forest residues were between 0.23 and 0.34 m(3) CH4/kg VS, which shows a significant improvement compared to 0.05 m(3) CH4/kg VS, from untreated forest residues. These improvements count up to 50% increase in the methane yields from the pretreated substrates based on expected theoretical yield from carbohydrates. Among the organic solvents, pretreatments with acetic acid and ethanol led to highest methane yields, i.e., over 0.30 m(3) CH4/kg VS. However, techno-economical evaluation showed, pretreatment with methanol was more viable financially. The capital investments of the plant operating 20,000 tons of forest residues varied between 56 and 60 million USD, which could be recovered in less than 8 years of operation.

Quantitative (13)C MultiCP solid-state NMR as a tool for evaluation of cellulose crystallinity index measured directly inside sugarcane biomass

BACKGROUND

The crystallinity index (CI) is often associated with changes in cellulose structure after biological and physicochemical pretreatments. While some results obtained with lignocellulosic biomass demonstrate a progressive increase in the CI as a function of pretreatments, it is also shown that the CI can significantly vary depending on the choice of the measurement method. Besides, the influence of the CI on the recalcitrance of biomass has been controversial for a long time, but the most recent results tend to point out that the efficiency of pretreatments in reducing the recalcitrance is not clearly correlated with the decrease of the CI. Much of this controversy is somewhat associated with the inability to distinguish between the CI of the cellulose inside the biomass and the CI of the full biomass, which contains other amorphous components such as lignin and hemicellulose.

RESULTS

Cross polarization by multiple contact periods (Multi-CP) method was used to obtain quantitative (13)C solid-state nuclear magnetic resonance (ssNMR) spectra of sugarcane bagasse biomass submitted to two-step pretreatments and/or enzymatic hydrolysis. By comparing the dipolar filtered Multi-CP (13)C NMR spectra of untreated bagasse samples with those of samples submitted to acid pretreatment, we show that a 1% H2SO4-assisted pretreatment was very effective in removing practically all the hemicellulose signals. This led us to propose a spectral editing procedure based on the subtraction of MultiCP spectra of acid-treated biomass from that of the extracted lignin, to obtain a virtually pure cellulose spectrum. Based on this idea, we were able to evaluate the CI of the native cellulose inside the sugarcane bagasse biomass.

CONCLUSIONS

The results show the validity of the proposed method as a tool for evaluating the variations in the CI of the cellulose inside biomasses of similar kinds. Despite a clear increase in the CI of biomass as measured by X-ray diffraction, no significant variations were observed in the CI of the cellulose inside the biomass after a particular 1% H2SO4/0.25-4% NaOH chemical-assisted pretreatments. The CI of cellulose inside the biomass solid fraction that remained after the enzymatic hydrolysis was also evaluated. The results show a slight increase in crystallinity.

Effect of four pretreatments on enzymatic hydrolysis and ethanol fermentation of wheat straw. Influence of inhibitors and washing

Pretreatment is essential in the production of alcohol from lignocellulosic material. In order to increase enzymatic sugar release and bioethanol production, thermal, dilute acid, dilute basic and alkaline peroxide pretreatments were applied to wheat straw. Compositional changes in pretreated solid fractions and sugars and possible inhibitory compounds released in liquid fractions were analysed. SEM analysis showed structural changes after pretreatments. Enzymatic hydrolysis and fermentation by Pichia stipitis of unwashed and washed samples from each pretreatment were performed so as to compare sugar and ethanol yields. The effect of the main inhibitors found in hydrolysates (formic acid, acetic acid, 5-hydroxymethylfurfural and furfural) was first studied through ethanol fermentations of model media and then compared to real hydrolysates. Hydrolysates of washed alkaline peroxide pretreated biomass provided the highest sugar concentrations, 31.82g/L glucose, and 13.75g/L xylose, their fermentation yielding promising results, with ethanol concentrations reaching 17.37g/L.

Treatment of the biodegradable fraction of used disposable diapers by co-digestion with waste activated sludge

The results presented in this paper are part of a project aimed at designing an original solution for the treatment of used disposable diapers permitting the recycling of materials and the recovery of energy. Diapers must be collected separately at source and transported to an industrial facility to undergo special treatment which makes it possible to separate plastics and to recover a biodegradable fraction (BFD) made up mainly of cellulose. The methane yield of BFD was measured and found to be 280 ml CH4/g VSfed on average. 150 kg of dry BFD can be retrieved from the treatment of one ton of used disposable diapers, representing an energy potential of about 400 kW h of total energy or 130 kW h of electricity. As the treatment process for used diapers requires very high volumes of water, the setting up of the diaper treatment facility at a wastewater treatment plant already equipped with an anaerobic digester offers the advantages of optimizing water use as well as its further treatment and, also, the anaerobic digestion of BFD. The lab-scale experiments in a SBR showed that BFD co-digestion with sewage sludge (38% BFD and 62% waste activated sludge on volatile solids basis) was feasible. However, special attention should be paid to problems that might arise from the addition of BFD to a digester treating WAS such as insufficient mixing or floating particles leading to the accumulation of untreated solids in the digester.

Energy efficacy used to score organic refuse pretreatment processes for hydrogen anaerobic production

The production of hydrogen through Anaerobic Digestion (AD) has been investigated to verify the efficacy of several pretreatment processes. Three types of waste with different carbon structures have been tested to obtain an extensive representation of the behavior of the materials present in Organic Waste (OW). The following types of waste were selected: Sweet Product Residue (SPR), i.e., confectionary residue removed from the market after the expiration date, Organic Waste Market (OWM) refuse from a local fruit and vegetable market, and Coffee Seed Skin (CSS) waste from a coffee production plant. Several pretreatment processes have been applied, including physical, chemical, thermal, and ultrasonic processes and a combination of these processes. Two methods have been used for the SPR to remove the packaging, manual (SPR) and mechanical (SPRex). A pilot plant that is able to extrude the refuse to 200atm was utilized. Two parameters have been used to score the different pretreatment processes: efficiency (ξ), which takes into account the amount of energy produced in the form of hydrogen compared with the available energy embedded in the refuse, and efficacy (η), which compares the efficiency obtained using the pretreated refuse with that obtained using the untreated refuse. The best result obtained for the SPR was the basic pretreatment, with η=6.4, whereas the thermal basic pretreatment gave the highest value, η=17.0 for SPRex. The best result for the OWM was obtained through a combination of basic/thermal pretreatments with η=9.9; lastly, the CSS residue with ultrasonic pretreatment produced the highest quantity of hydrogen, η=5.2.

Increasing the shelf- life of papaya through vacuum packing

The main objective of this study was to increase the shelf life of fruits through vacuum packing. Papaya fruits were pretreated with waxing, oil application, purafil packets, tissue paper wrapping given along with control and were packed in 150 gauge thickness polyethylene film bags under vacuum and another set of these samples under without vacuum. The fruits were then stored at room and refrigerated temperature and analyzed for chemical changes. Results showed that the shelf life of the fruits increased under vacuum packing with room and refrigeration temperatures for one and four weeks respectively. The fruits packed without any pretreatment in 150 gauge polyethylene bags maintained the quality with minimum changes followed by waxing, purafil and oil application. During storage moisture, acidity, Vitamin C and total sugar decreased whereas reducing sugar and total soluble solids (TSS) increased during storage. The sensory qualities declined with the period of storage and temperature differences. The study concluded that vacuum packaging and refrigeration conditions increased the shelf life of the papaya fruits.

Effect of different pretreatments on the quality of mushrooms during solar drying

Freshly harvested mushrooms are highly perishable because of high moisture content metabolism and susceptible to enzymatic browning. Mushroom is a fungal fruiting body which is cultivated throughout the world. Effect on quality of dried mushrooms was studied for various chemical pretreatments viz. 1.0% potassium metabisulphite, 0.5% citric acid, 0.5% potassium metabisulphite + 0.2% citric acid, control and low cost drying methods viz. domestic solar dryer, medium size solar dryer and open sun drying. It was observed that application of 1% potassium metabisulphite treatment prior to drying using medium size solar dryer gave best quality dried mushrooms with results in accordance with statistical analysis. The drying time and final moisture content was also comparatively less than the mushrooms dried under shading plates and open sun drying.