The Effect of Erythritol on the Physicochemical Properties of Reformulated, High-Protein, and Sugar-Free Macarons Produced from Whey Protein Isolate Intended for Diabetics, Athletes, and Physically Active People

This study reports the possibility of obtaining sugar-free WPI-based macarons with erythritol addition. The whey protein isolate (WPI) solution (20%, w/v) was whipped, and erythritol was added to the foam at concentrations of 20, 40, and 60 g, with 125 g of almond flour. The rheological properties (τ, G', G″, and tan (δ)) and stability of the macaron batters before baking were evaluated. In order to produce the macarons, the batters were solidified at 147 °C for 12 min. The textural and surface properties (roughness and color), as well as the microstructures and water activities, were determined for the macarons. It was feasible to produce macarons over the entire range of the tested erythritol content. Even the smallest amount of erythritol (20 g) facilitated the preservation of the macaron structure. The medium erythritol concentration (40 g) improved the stability of the batters and their rheology and was the most effective for air pocket stabilization during baking; however, its largest addition (60 g) resulted in an increase in the final macaron volume. The increased erythritol addition improved mechanical properties and shelf life, producing a smoothing effect on the macaron surfaces and having a significant effect on their color co-ordinates.

Influence of fatty acid-esterified waxy maize starch type and concentration on stability and properties of oil-in-water emulsions

In the current study, native and different fatty acid-esterified waxy maize starches (octanoate, myristoate, and stearoate), followed by an OSA-potato starch (as an industrial emulsifier) were used to prepare sunflower oil-in-water (O/W) emulsion. The effect of emulsifier type and concentration were evaluated on properties of emulsions in terms of mean droplet size, droplet size distribution, and creaming index. To prepare the emulsion, the emulsifier to oil ratios of 1.25 and 0.5 for octanoate and industrial emulsifier (control) were considered as the selected formulations based on the lowest creaming index (2.63 and 0 %, respectively). The influence of various pHs and ionic strengths on droplet size, span and zeta potential value was similar for both produced emulsions. Therefore, the fatty acid-esterified starch could be suggested as a promising environmentally friendly alternative to industrial emulsifiers for fabrication of emulsions with similar stability.

Quality of Emulsions Based on Modified Watermelon Seed Oil, Stabilized with Orange Fibres

The aim of the study was to evaluate emulsion systems prepared on the basis of blended fat in different ratios (watermelon seed oil and mutton tallow) stabilised by orange fibres and xanthan gum. Emulsions were subjected to stability testing by Turbiscan and were assessed in terms of mean droplet size, colour, viscosity, texture, skin hydration and sensory properties. The most stable systems were found to be the ones containing a predominance of mutton tallow in a fat phase. For these emulsions the lowest increase in mean particle size during storage was observed. The study also confirmed the synergistic effect of the thickeners used. The presented emulsions despite favourable physicochemical parameters, did not gain acceptance in sensory evaluation.

Stability of Film-Forming Dispersions: Affects the Morphology and Optical Properties of Polymeric Films

Starch-based films are promising alternatives to synthetic films in food packaging. They were widely studied in terms of mechanical and optical properties. In food packaging, optical properties are of great interest because ultra violet (UV-light) protection is strictly required. Nevertheless, the characterization of film-forming dispersions was poorly addressed, especially regarding its correlation with the film produced. In this work, we characterized film-forming dispersions at different compositions of starch and carboxymethyl cellulose (CMC) by Turbiscan. This instrument is based on multiple light scattering and gives significant information about the miscibility of polymers in the dispersed phase. Indeed, it identifies the phenomena of destabilization and phase separation before their visibility to the unaided eye. This work aimed to study whether the homogeneous/inhomogeneous morphology of films could be forecast by the analysis of profiles obtained in the dispersed phase. The films produced were investigated by optical microscopy and absorbance analysis. As the CMC fraction increased, Turbiscan showed reduced phase separation. This implies better miscibility of mixture components and higher gelification degree. The related film was more homogeneous and presented higher UV absorbance. Consequently, film-forming dispersions and optical properties of films are strictly correlated and Turbiscan-based analysis is very useful to investigate the dispersion stability and predict the film quality.

Surfactin as a Green Agent Controlling the Growth of Porous Calcite Microstructures

This study presents a new, simple way to obtain mesoporous calcite structures via a green method using an eco-friendly surface-active compound, surfactin, as a controlling agent. The effects of synthesis time and surfactin concentration were investigated. The obtained structures were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) coupled with gas mass spectrometry (QMS) analysis. The experimental data showed that surfactin molecules significantly changed the morphology of the calcite crystals, roughening and deforming the surface and creating a greater specific surface area, even at low biosurfactant concentrations (10 ppm). The size of the crystals was reduced, and the zeta potential value of calcium carbonate was more negative when more biosurfactant was added. The XRD data revealed that the biomolecules were incorporated into the crystals and slowed the transformation of vaterite into calcite. It has been shown that as long as vaterite is present in the medium, the calcite surface will be less deformed. The strong influence of surfactin molecules on the crystal growth of calcium carbonate was due to the interaction of surfactin molecules with free calcium ions in the solution as well as the biomolecules adsorption at the formed crystal surface. The role of micelles in crystal growth was examined, and the mechanism of mesoporous calcium carbonate formation was presented.

Curcumin Containing PEGylated Solid Lipid Nanoparticles for Systemic Administration: A Preliminary Study

Curcumin (CUR) has a wide range of pharmacological properties, including anti-inflammatory and antioxidant activities, and it can be considered a good candidate for the potential treatment of central nervous system (CNS) pathologies, although its use in clinical practice is compromised due to its high lipophilicity. Solid lipid nanoparticles (SLNs) are well-known nanocarriers representing a consolidated approach for the delivery of lipophilic compounds, but their systemic use is limited due their short half-life. The formulation of stealth SLNs (pSLNs) could be a valid strategy to overcome this limit. Curcumin-loaded-pSLNs were prepared by the solvent evaporation method. Formulation was characterized for their mean size, zeta potential, size distribution, and morphology. Drug antioxidant activity was evaluated by Oxygen Radical Absorbance Capacity (ORAC) assay. Finally, the obtained formulations were analyzed in terms of long-term stability. Curcumin-loaded-pSLNs showed good technological parameters with a mean particle size below 200 nm, as confirmed by TEM images, and a zeta potential value around -30 mV, predicting good long-term stability. Differential Scanning Calorimetry (DSC) analysis confirmed that PEG micelles interacted with the SLN surface; this suggests the location of the PEG on the pSLN surface. Therefore, these preliminary studies suggest that the produced formulation could be regarded as a promising carrier for the systemic administration.

Rutin-Loaded Poloxamer 407-Based Hydrogels for In Situ Administration: Stability Profiles and Rheological Properties

Rutin is a flavone glycoside contained in many plants, and exhibits antioxidant, anti-inflammatory, anticancer, and wound-healing properties. The main disadvantage related to the use of this molecule for pharmaceutical application is its poor bioavailability, due to its low solubility in aqueous media. Poloxamer 407-hydrogels show interesting thermo-sensitive properties that make them attractive candidates as pharmaceutical formulations. The hydrophobic domains in the chemical structure of the copolymer, a polymer made up of two or more monomer species, are useful for retaining poorly water-soluble compounds. In this investigation various poloxamer 407-based hydrogels containing rutin were developed and characterized as a function of the drug concentration. In detail, the Turbiscan stability index, the micro- and dynamic rheological profiles and in vitro drug release were investigated and discussed. Rutin (either as a free powder or solubilized in ethanol) did not modify the stability or the rheological properties of these poloxamer 407-based hydrogels. The drug leakage was constant and prolonged for up to 72 h. The formulations described are expected to represent suitable systems for the in situ application of the bioactive as a consequence of their peculiar versatility.

Monitoring Silane Sol-Gel Kinetics with In-Situ Optical Turbidity Scanning and Dynamic Light Scattering

Organosilanes (e.g., R'-SiOR₃) provide hydrophobic functionality in thin-film coatings, porous gels, and particles. Compared with tetraalkoxysilanes (SiOR₄), organosilanes exhibit distinct reaction kinetics and assembly mechanisms arising from steric and electronic properties of the R' group on the silicon atom. Here, the hydrolysis and condensation pathways of n-propyltrimethoxy silane (nPM) and a tri-fluorinated analog of nPM, 3,3,3-trifluoropropyl trimethoxy silane (3F), were investigated under aqueous conditions at pH 1.7, 2.0, 3.0, and 4.0. Prior to hydrolysis, 3F and nPM are insoluble in water and form a lens at the bottom (3F) or top (nPM) of the solutions. This phase separation was employed to follow reaction kinetics using a Turbiscan instrument to monitor hydrolysis through solubilization of the neat silane lens while simultaneously tracking condensation-induced turbidity throughout the bulk solution. Dynamic light scattering confirmed the silane condensation and particle aggregation processes reported by the turbidity scanning. Employing macroscopic phase separation of the starting reactants from the solvent further allows for control over the reaction kinetics, as the interfacial area can be readily controlled by reaction vessel geometry, namely by controlling the surface area to volume. In-situ turbidity scanning and dynamic light scattering revealed distinct reaction kinetics for nPM and 3F, attributable to the electron withdrawing and donating nature of the fluoro- and organo-side chains of 3F and nPM, respectively.

Clotrimazole-Loaded Mediterranean Essential Oils NLC: A Synergic Treatment of Candida Skin Infections

The increasing development of resistance of Candida species to traditional drugs represents a great challenge to the medical field for the treatment of skin infections. Essential oils were recently proposed to increase drug effectiveness. Herein, we developed and optimized (2³ full factorial design) Mediterranean essential oil (Rosmarinus officinalis, Lavandula x intermedia “Sumian”, Origanum vulgare subsp. hirtum) lipid nanoparticles for clotrimazole delivery, exploring the potential synergistic effects against Candida spp. Small sized nanoparticles (<100 nm) with a very broad size distribution (PDI < 0.15) and long-term stability were successfully prepared. Results of the in vitro biosafety on HaCaT (normal cell line) and A431 (tumoral cell line), allowed us to select Lavandula and Rosmarinus as anti-proliferative agents with the potential to be used as co-adjuvants in the treatment of non-tumoral proliferative dermal diseases. Results of calorimetric studies on biomembrane models, confirmed the potential antimicrobial activity of the selected oils due to their interaction with membrane permeabilization. Nanoparticles provided a prolonged in vitro release of clotrimazole. In vitro studies against Candida albicans, Candida krusei and Candida parapsilosis, showed an increase of the antifungal activity of clotrimazole-loaded nanoparticles prepared with Lavandula or Rosmarinus, thus confirming nanostructured lipid carriers (NLC) containing Mediterranean essential oils represent a promising strategy to improve drug effectiveness against topical candidiasis.

Repurposing itraconazole to the benefit of skin cancer treatment: A combined azole-DDAB nanoencapsulation strategy

In this work, we aimed at developing an improved topical SLN formulation combining itraconazole delivery with a coating layer of didodecyldimethylammonium bromide, thus repurposing the drug effectiveness by synergistic skin anticancer effectiveness. In order to obtain a stable SLN formulation with small homogeneously dispersed particles, a deep formulative study was developed screening three different solid lipids (Suppocire NB, Cetyl Palmitate and Dynasan 114) for the SLN preparation by the phase inversion temperature. A bluishcolored shade formulation, with homogeneous small particles size (<50 nm) was obtained only using Suppocire NB. The cytotoxicity of all SLN was tested after 24 h exposure against three adherent skin cell lines (A431, HaCaT and SK-MEL-5). Results demonstrate that both unloaded and drugloaded SLN did not significantly affect the cell viability of the non-tumoral HaCaT cell line, thus confirming the safe potential topical application of these formulations. A dose-dependent decrease in cell viability was observed for the tumoral cell lines, A431 and SK-MEL-5, with a significant reduction of the A431 cancer cell line viability. The drug molecule addition to the uncoated nanoparticles was able to increase of almost 20% the reduction of the viability of the cancer cells treated. Ours results demonstrate the potentiality of repurposing itraconazole activity by using the combined nanoencapsulation strategy with the positively charged coating layer on SLN, which can be further investigated as a promising stable and safe approach to significantly reduce the viability of skin cancer cells.

Insights into gelation kinetics and gel front migration in cation-induced polysaccharide hydrogels by viscoelastic and turbidity measurements: Effect of the nature of divalent cations

Polysaccharide-based hydrogels were prepared by the diffusion of various divalent cations (X²⁺) into the polygalacturonate (polyGal) solution through a dialysis membrane. The diffusion of various divalent cations (Mg²⁺, Ca²⁺, Zn²⁺ and Ba²⁺) was investigated. The polyGal gel growth was studied as a function of the initial cation concentration by both viscoelastic and turbidity measurements. We have demonstrated for the first time that the determination of the spatiotemporal variation of turbidity during the gelation process allowed to study the gel front migration. For Ca-polyGal, Zn-polyGal and Ba-polyGal, the gel front migration was characterized by the presence of a peak at the sol/gel interface. This peak was not observed in the case of Mg-polyGal where the gel was not formed. The apparent diffusion coefficient of the gel front (D_app) which was calculated from the evolution of this peak increased when the initial cation concentration was increased. Moreover, we have suggested a gelation mechanism based on the presence of a threshold molar ratio R* (=[X²⁺]/[Galacturonic unit]) in which some point-like crosslinks are precursors of the formation of dimers and multimers inducing the contraction of the gel and thus the formation of the gel front.

Nanoencapsulation strategies for the delivery of novel bifunctional antioxidant/σ1 selective ligands

Nowadays sigma-1 receptors are considered as new therapeutic objectives for central nervous system neurodegenerative diseases. Among different molecules, alpha lipoic acid has been identified as a natural potent antioxidant drug, whose therapeutic efficacy is limited by its many drawbacks, such as fast metabolism, poor bioavailability and high physico-chemical instability. Alfa-lipoic acid derivatives have been recently developed demonstrating their neuroprotective activity and effectiveness in different types of oxidative stress. In this work, two derivatives containing an amide or an ester functional group with different lipophilicity, were selected for their important affinity for sigma-1 receptors. Herein, in order to improve the in vitro stability and antioxidant effectiveness of alpha-lipoic acid derivatives, we focused our efforts in the nanoencapsulation strategies. Aqueous-core nanocapsules for the delivery of the hydrophilic compound and nanostructured lipid carrier for the lipophilic derivative, were properly designed and prepared using a direct or inverse eco-friendly organic solvent-free procedure. All nanosystems were characterized in terms of mean size, polydispersity, stability, morphology, encapsulation efficiency and in vitro release profiles. In order to evaluate the nanocarriers biocompatibility and antioxidant effectiveness, in vitro biological studies (cell viability, total antioxidant capacity and total oxidative status) were developed on primary human whole blood cell cultures, on both unloaded and derivatives-loaded nanodevices.

Protein-Mediated Precipitation of Calcium Carbonate

Calcium carbonate is an important component in exoskeletons of many organisms. The synthesis of calcium carbonate was performed by mixing dimethyl carbonate and an aqueous solution of calcium chloride dihydrate. The precipitation product was characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) measurements. In addition, the turbidity of the reaction solution was acquired to monitor the kinetics of the calcium carbonate structure's growth in the investigated system. In this study, samples of CaCO₃ particles obtained with individual proteins, such as ovalbumin, lysozyme, and a mixture of the proteins, were characterized and compared with a control sample, i.e., synthesized without proteins. The obtained data indicated that the addition of ovalbumin to the reaction changed the morphology of crystals from rhombohedral to 'stack-like' structures. Lysozyme, however, did not affect the morphology of calcium carbonate, yet the presence of the protein mixture led to the creation of more complex composites in which the calcium carbonate crystals were constructed in protein matrices formed by the ovalbumin-lysozyme interaction. It was also observed that in the protein mixture, ovalbumin has a major influence on the CaCO₃ formation through a strong interaction with calcium ions, which leads to the coalescence and creation of a steric barrier reducing particle growth. The authors proposed a mechanism of calcium carbonate grain growth in the presence of both proteins, taking into account the interaction of calcium ions with the protein.

Ostwald Ripening Stability of Curcumin-Loaded MCT Nanoemulsion: Influence of Various Emulsifiers

Curcumin is a flavonoid found in the rhizome of the turmeric plant (Curcuma longa L.) and has recently attracted interest because it has numerous biological functions and therapeutic properties. In the present study, we attempted to incorporate curcumin into medium-chain triglyceride (MCT) nanoemulsions (0.15 wt% curcumin, 10 wt% MCT oil, and 10 wt% emulsifiers) with various emulsifiers [polyoxyethylene (20) sorbitan monolaurate (Tween-20), sorbitan monooleate (SM), and soy lecithin (SL)]. The physicochemical properties of the nanoemulsions including the Ostwald ripening stability were investigated. The initial droplet size was found to be 89.08 nm for the nanoemulsion with 10 wt% Tween-20 (control), and when Tween-20 was partially replaced with SM and SL, the size decreased: 73.43 nm with 4 wt% SM+6 wt% Tween-20 and 67.68 nm with 4 wt% SL+6 wt% Tween-20 (prepared at 15,000 psi). When the nanoemulsions were stored for 28 days at room temperature, the droplet size increased as the storage time increased. The largest increase was observed for the control nanoemulsion, followed by the 4 wt% SL+6 wt% Tween-20 and 4 wt% SM+6 wt% Tween-20 systems. The Turbiscan dispersion stability results strongly supported the relationship between droplet size and storage time. The time-dependent increase in droplet size was attributed to the Ostwald ripening phenomenon. Thus, the Ostwald ripening stability of curcumin-loaded MCT nanoemulsions with Tween-20 was considerably improved by partially replacing the Tween-20 with SM or SL. In addition, curcumin may have acted as an Ostwald ripening inhibitor.