Human Adipose-Derived Mesenchymal Stem Cells-Incorporated Silk Fibroin as a Potential Bio-Scaffold in Guiding Bone Regeneration

Recently, stem cell-based bone tissue engineering (BTE) has been recognized as a preferable and clinically significant strategy for bone repair. In this study, a pure 3D silk fibroin (SF) scaffold was fabricated as a BTE material using a lyophilization method. We aimed to investigate the efficacy of the SF scaffold with and without seeded human adipose-derived mesenchymal stem cells (hASCs) in facilitating bone regeneration. The effectiveness of the SF-hASCs scaffold was evaluated based on physical characterization, biocompatibility, osteogenic differentiation in vitro, and bone regeneration in critical rat calvarial defects in vivo. The SF scaffold demonstrated superior biocompatibility and significantly promoted osteogenic differentiation of hASCs in vitro. At six and twelve weeks postimplantation, micro-CT showed no statistical difference in new bone formation amongst all groups. However, histological staining results revealed that the SF-hASCs scaffold exhibited a better bone extracellular matrix deposition in the defect regions compared to other groups. Immunohistochemical staining confirmed this result; expression of osteoblast-related genes (BMP-2, COL1a1, and OCN) with the SF-hASCs scaffold treatment was remarkably positive, indicating their ability to achieve effective bone remodeling. Thus, these findings demonstrate that SF can serve as a potential carrier for stem cells, to be used as an osteoconductive bioscaffold for BTE applications.

Dimethyloxallyl Glycine-Incorporated Borosilicate Bioactive Glass Scaffolds for Improving Angiogenesis and Osteogenesis in Critical-Sized Calvarial Defects

BACKGROUND

In the field of bone tissue engineering, there has been an increasing interest in biomedical materials with both high angiogenic ability and osteogenic ability. Among various osteogenesis materials, bioactive borosilicate and borate glass scaffolds possess suitable degradation rate and mechanical strength, thus drawing many scholars' interests and attention.

OBJECTIVE

In this study, we fabricated bioactive glass scaffolds composed of borosilicate 2B6Sr using the Template-Method and incorporated Dimethyloxalylglycine (DMOG), a small-molecule angiogenic drug possessing good angiogenic ability, to improve bone regeneration.

METHODS

The in-vitro studies showed that porous borosilicate bioactive glass scaffolds released slowly, a steady amount of DMOG and stimulated the proliferation and osteogenic differentiation of human bone marrow stromal cells hBMSCs.

RESULTS

In-vivo studies showed that the borosilicate bioactive glass scaffolds could significantly promote new bone formation and neovascularization in rats' calvarial bone defects.

CONCLUSION

These results indicated that DMOG-incorporated bioactive glass scaffold is a successful compound with excellent angiogenesis-osteogenesis ability, which has favorable clinical prospects.

Head-compliant microstrip split ring resonator for non-invasive healing monitoring after craniosynostosis-based surgery

A soft and highly directive, proximity-coupled split-ring resonator fabricated with a liquid alloy, copper and polydimethylsiloxane (PDMS) is presented. The same was designed for sensing osteogenesis of calvarial bone. As dielectric properties of bone grafts in ossifying calvarial defects should change during the osteogenesis process, devices like this could monitor the gradual transformation of the defect into bone by differentiating changes in the dielectric properties as shifts in the resonance frequency. Computational Software Technology (CST) Microwave Studio®-based simulation results on computational head models were in good agreement with laboratory results on head phantom models, which also included the comparison with an in-vivo measurement on the human head. A discussion based on an inductive reasoning regarding dynamics’ considerations is provided as well. Since the skin elasticity of newborn children is high, stretching and crumpling could be significant. In addition, due to typical head curvatures in newborn children, bending should not be a significant issue, and can provide higher energy focus in the defect area and improve conformability. The present concept could support the development of soft, cheap and portable follow-up monitoring systems to use in outpatient hospital and home care settings for post-operative monitoring of bone healing after reconstructive surgical procedures.

Effects of alloplastic graft material combined with a topical ozone application on calvarial bone defects in rats

BACKGROUND

This study presents the evaluation of the damage in the bone tissue resulting from a calvarial defect in rats and the efficiency of exposure to an ozone application with an alloplastic bone graft on the calvarial bone damage.

MATERIALS AND METHODS

Wistar male rats (n = 56) were divided into four groups: a control group (n = 14), defect and ozone group (n = 14), defect and graft group (n = 14), and defect, graft, and ozone group (n = 14). Under anaesthesia, a circular full-thickness bone defect was created in all groups, and the experimental groups were further divided into two sub-groups, with 7 rats in each group sacrificed at the end of the 4th and 8th weeks. Bone samples were dissected, fixed in 10% formalin solution, and decalcified with 5% ethylene-diamine-tetraacetic acid (EDTA). After the routine follow-up on tissues, immunostaining of osteopontin and osteonectin antibodies was applied to sections and observed under a light microscope.

RESULTS

The control group exhibited osteopontin and osteonectin expression in fibroblasts and inflammatory cells at the end of the 4th week with an acceleration at the 8th week. Ozone administration elucidated new trabecular bone formation by increasing osteoblastic activity. Lastly, our observations underscore that a combination of allograft and ozone application increased the osteoblast, osteocyte, and bone matrix development at the 4th and 8th weeks.

CONCLUSIONS

Exposure to an ozone application with an alloplastic bone graft on calvarial bone damage may induce osteoblastic activity, matrix development, mature bone cell formation, and new bone formation in rats.

BMP2-mimicking peptide modified with E7 coupling to calcined bovine bone enhanced bone regeneration associating with activation of the Runx2/SP7 signaling axis

Commercial bone substitute, such as calcined bovine bone (CBB), is currently extensively used as an alternative to autogenous bone. However, CBB lacks osteoinductivity and merely serves as a scaffold for native bone formation. To address this issue, we designed and prepared a heptaglutamate (E7)-modified BMP2-mimicking peptide (7E) and carried out a series of comprehensive physical characterizations and in vivo and in vitro studies to evaluate its role in the repair of cranial defects. The data elucidated that the amount of peptide anchoring to the bone graft materials was remarkably increased after modified with E7. Of note, 7E had a relatively stable and durable release, which promoted the osteogenic differentiation of rat derived bone marrow mesenchymal stem cells (BMSCs) and enhanced the bone regeneration of a rabbit calvarial defect by regulating the expression of the Runx2/SP7 axis. In summary, the composite biomaterials incorporating the E7-modified BMP2-mimicking peptide and CBB prepared in this study is a novel bone augmentation material with the merits of non-immunotoxicity, convenience, and low cost. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 108B:80-93, 2020.

P34HB electrospun fibres promote bone regeneration in vivo

Objective

Bone tissue engineering was introduced in 1995 and provides a new way to reconstruct bone and repair bone defects. However, the design and fabrication of suitable bionic bone scaffolds are still challenging, and the ideal scaffolds in bone tissue engineering should have a three‐dimensional porous network, good biocompatibility, excellent biodegradability and so on. The purpose of our research was to investigate whether a bioplasticpoly3‐hydroxybutyrate4‐hydroxybutyrate (P34HB) electrospun fibre scaffold is conducive to the repair of bone defects, and whether it is a potential scaffold for bone tissue engineering.

Materials and methods

The P34HB electrospun fibre scaffolds were prepared by electrospinning technology, and the surface morphology, hydrophilicity, mechanical properties and cytological behaviour of the scaffolds were tested. Furthermore, a calvarial defect model was created in rats, and through layer‐by‐layer paper‐stacking technology, the P34HB electrospun fibre scaffolds were implanted into the calvarial defect area and their effect on bone repair was evaluated.

Results

The results showed that the P34HB electrospun fibre scaffolds are interwoven with several fibres and have good porosity, physical properties and chemical properties and can promote cell adhesion and proliferation with no cytotoxicity in vitro. In addition, the P34HB electrospun fibre scaffolds can promote the repair of calvarial defects in vivo.

Conclusions

These results demonstrated that the P34HB electrospun fibre scaffold has a three‐dimensional porous network with good biocompatibility, excellent biosafety and ability for bone regeneration and repair; thus, the P34HB electrospun fibre scaffold is a potential scaffold for bone tissue engineering.

Coating of electrospun poly(lactic-co-glycolic acid) nanofibers with willemite bioceramic: improvement of bone reconstruction in rat model

We have investigated the combination effects of bioceramics and poly(lactide-co-glycolide) (PLGA) on bone reconstruction in calvarial critical size defects using a rat model. Willemite (Zn2SiO4) ceramics were prepared and coated on the surface of electrospun fabricated scaffolds. After scaffolds and nanoparticles characterization, osteoconductivity of the construct was analyzed using digital mammography, multislice spiral-computed tomography (MSCT) imaging, and histological analysis. Eight weeks after implantation, no sign of inflammation was observed at the site of the osseous defect. The results showed that the ceramics supported bone regeneration and highest bone reconstruction were observed in willemite-coated PLGA. This suggests that electrospun PLGA nanofibers coated with BG are potential candidate implants for bone tissue engineering applications.