Subject-specific computational modeling of acromioclavicular and coracoclavicular ligaments

BACKGROUND

Disruption of the acromioclavicular joint is a common injury. Despite the different surgical procedures described for treating this injury, complications such as loss of reduction and failure of fixation remain unacceptably high. We developed a computer model of the acromioclavicular joint to better understand the biomechanical contributions of the ligaments that are typically injured.

METHODS

Six fresh frozen human cadaveric shoulders were tested on an AMTI VIVO 6-degree of freedom test platform to measure force-displacement in inferior translation, anteroposterior translation, and internal rotation before and after sequentially transecting the coracoclavicular and acromioclavicular ligaments. These data were used to construct computer models of each specimen. Three-dimensional computed tomographic scans were used to generate a rigid-body dynamics model using the AnyBody Modeling System. The scapula and clavicle were connected by the acromioclavicular joint capsule, the conoid ligament, and the trapezoid ligament. Subject-specific ligament properties were calculated by matching computer predictions to experimental force-displacement data.

RESULTS

The calculated free lengths of the conoid, trapezoid, and acromioclavicular ligaments were 13.5 (±3.2), 11.8 (±2.4), and 11.0 (±2.7) mm, respectively. The calculated stiffnesses of the conoid, trapezoid, and acromioclavicular ligaments were 34.3 (±6.3), 28.4 (±3.2), and 33.8 (±8.2) N/mm, respectively. Root mean square deviation (RMSD) of predicted force-displacement curves relative to experimental force-displacement curves (during inferior and anteroposterior translation) was less than 1 mm. For validation of subject-specific models, after ligament properties were calculated, the RMSD of the predicted torque over 15° of internal rotation was 12% of maximum rotational torque (average for 6 specimens).

DISCUSSION AND CONCLUSION

Acromioclavicular disruption results in multidirectional instability, which requires careful consideration of the individual contributions of the injured ligaments. In addition, variations in patient anatomy can significantly affect the biomechanical stability of the reconstruction. Subject-specific models can enhance our understanding of the individual and collective biomechanical contributions of the injured soft tissues to the multiaxial stability of the acromioclavicular joint. These models may also be useful for analyzing and assessing biomechanical stability after various types of surgical reconstruction.

Stability, deformity, and fixation of the floating shoulder: a cadaveric biomechanical study

BACKGROUND

Floating shoulder injuries cause instability and deformity due to disruptions of the scapula, clavicle, and superior shoulder suspensory complex ligaments (SSSC). Resulting deformity of the glenopolar angle (GPA) has not previously been established, nor has the impact on stability and deformity when surgical fixation is performed. This study sought to quantify stability and deformity for multiple injury patterns and the improvement to these parameters provided by clavicle and coracoclavicular (CC) ligament fixation.

METHODS

Fourteen cadaveric specimen upper extremities were used, which included the entire upper extremity, scapula, clavicle, and cranial-most ribs. After being mounted upright, a scapular neck fracture was created, followed by either a midshaft clavicle fracture or sectioning of the acromioclavicular and coracoacromial ligaments. Subsequent sectioning of the other structure(s) followed by the CC ligaments was then performed. In all specimens, the clavicle was then plated, followed by a CC ligament repair. At each step, a radiograph in the AP plane of the scapula was taken to measure GPA and displacement of the glenoid fragment using radiopaque markers placed in the scapula. These radiographs were taken both unloaded and with a 100-N applied medializing force.

RESULTS

When evaluating deformity related to sectioning, the GPA was reduced when the CC ligaments were sectioned compared to an isolated scapula fracture (P = .022) and compared to a combined scapula and clavicle fracture (P = .037). For stability, displacement with a 100-N force was significantly increased when the CC ligaments were sectioned compared to an isolated scapula fracture (P = .027). In cases of an ipsilateral scapula neck and clavicle fracture with intact ligaments, fixation of the clavicle alone provided a statistically significant improvement in the GPA (P = .002); but not in reduction of displacement (P = .061). In cases of an ipsilateral scapula neck and clavicle fracture with concomitant disruption of the coracoacromial, acromioclavicular, and CC ligaments, the GPA was improved by clavicle fixation (P < .001) and increasingly so by subsequent CC ligament repair (P < .001). Displacement was also improved in these 2 states (P < .001, P = .008, respectively).

DISCUSSION

This biomechanical study confirmed the importance of the acromioclavicular, coracoacromial, and CC ligaments in conferring stability in SSSC injuries. Disruption of the CC ligaments created significant deformity of the GPA and instability with a medializing force. Clinical treatment should consider the integrity of these ligaments and their repair in conjunction with clavicle fixation, knowing that this combination should restore a biomechanical state equivalent to an isolated scapula fracture.

Triple Endobutton technique for the treatment of Neer type II lateral clavicle fractures: 2-year findings

BACKGROUND

Although various kinds of operative procedures have been reported in the literature, there is still no undisputed gold standard technique for the treatment of Neer type II lateral clavicle fractures. This trauma is classified as a bone fracture, but it is primarily a ligamentous problem due to the instability it generates. This study analyzed the clinical and radiological results of treatment for Neer type II lateral clavicle fractures using the triple Endobutton (Smith & Nephew) technique in 20 patients with at least 2 years of follow-up.

METHODS

This study enrolled 20 patients with Neer type II distal clavicle fractures who underwent the triple Endobutton technique using 3 Endobuttons (1 with a closed loop and 2 without) and 3 No. 5 Ethibond sutures (Ethicon Inc.) from October 2017 to May 2020. Patients were assessed with clinical and radiological follow-up at 3, 6, 12, and 24 months postoperatively. Clinical assessments consisted of the visual analog scale and the Constant score. Radiological evaluation was achieved by measuring the coracoclavicular distance.

RESULTS

The mean follow-up was 35 ± 9 months (range, 24-55 months). The visual analog scale and Constant scores revealed significant improvements from 6 ± 1 (range, 4-8) and 42 ± 4 (range, 35-48) scores preoperatively to 1 ± 1 (range, 0-1) and 94 ± 2 (range, 90-98) scores at the final evaluation, respectively (P < .001). The coracoclavicular distance of the injured side was an average of 9 ± 1 mm (range, 7-12 mm) at the final follow-up radiograph which was not significantly different from that of the contralateral side (P = .75).

CONCLUSIONS

In this study, the triple Endobutton technique was a safe, reliable, and novel surgical technique that yielded good to excellent short-term clinical and radiological outcomes for the treatment of Neer type II distal clavicle fractures.

Truly anatomic coracoclavicular ligament reconstruction with 2 EndoButton devices for acute Rockwood type V acromioclavicular joint dislocations: 5-year findings

BACKGROUND

To date, mid-term clinical and radiologic outcomes of treatment for acute Rockwood type V acromioclavicular (AC) joint dislocations using 2 EndoButton devices (Smith & Nephew, Andover, MA, USA) have not been reported in the literature.

METHODS

We reviewed 25 patients (15 men and 10 women) with acute AC joint separations who were treated with truly anatomic coracoclavicular ligament reconstruction using 2 EndoButton devices between May 2013 and October 2015. Clinical assessments consisted of the visual analog scale score and the Constant score. Radiologic evaluation was achieved by measuring the coracoclavicular distance and AC distance. Previously, this same patient cohort was reviewed after 2 years of follow-up using similar methods.

RESULTS

All 25 patients were available for mid-term follow-up 5 years after the operation. The mean duration of follow-up was 76 ± 7 months (range, 66-90 months). Of the patients, 23 (92%) continued to be satisfied or very satisfied with the treatment results. The visual analog scale score and Constant score improved significantly when compared with the baseline scores (0 ± 0 and 96 ± 3, respectively, at 5-year follow-up vs. 5 ± 1 and 45 ± 6, respectively, postoperatively) and remained essentially unchanged when compared with the 2-year follow-up data (0 ± 0 and 96 ± 3, respectively, at 5-year follow-up vs. 0 ± 1 and 95 ± 3, respectively, at 2-year follow-up). On the 5-year radiographs, 3 patients (12%) demonstrated loss of reduction and 5 patients (20%) had calcifications noted. There was, however, no significant difference in clinical outcomes or patient satisfaction when comparing patients with radiographically abnormal findings vs. patients with anatomic reduction.

CONCLUSION

Truly anatomic coracoclavicular ligament reconstruction using 2 EndoButton devices results in satisfactory functional outcomes at 5 years postoperatively. In contrast to baseline, all cases improved significantly.

[Restoring horizontal stability in III-V acromioclavicular dislocations by anatomic reconstruction of the coracoclavicular and acromioclavicular ligaments; surgical technique]

INTRODUCTION

dislocation of the acromioclavicular (AC) joint is a common injury seen in young adults. The objective is to describe a surgical technique that can restore the horizontal and vertical stability of the AC joint.

MATERIAL AND METHODS

we describe a surgical technique that can restore horizontal and vertical stability using an allograft for the anatomical reconstruction of the CC and AC ligaments, for AC grade III-V dislocations according to the Rockwood classification.

RESULTS

this is a surgical technique with anatomical and biological reconstruction of the CC and AC ligaments, using an allograft. Two bone tunnels are made in the clavicle, passing the lateral end of the graft below the acromion; then the two ends are fixed with two bioabsorbable screws, restoring vertical and horizontal stability.

CONCLUSION

this procedure allows to restore the vertical and horizontal stability of the AC joint. Follow up studies are required to report functional and radiological results, in order to ensure advantages compared to existing techniques.

Operative treatment of acute acromioclavicular joint dislocations graded Rockwood III-V: a retrospective and comparative study between three different surgical techniques

BACKGROUND

the optimal treatment of acute type III-V acromioclavicular (A-C) Rockwood dislocations is still a matter of discussion in orthopaedic surgery.

AIM OF THE WORK

retrospective and comparative evaluation of the clinical and radiographic results of three different surgical techniques for stabilization of A-C joint using tension band wiring, hook plate and TightRope.

METHODS

a consecutive series of patients, treated from January 2014 and November 2019, were divided into three groups according to the surgical method used. They were clinically and radiographically assessed and the results were compared with those present in the literature.

RESULTS

66 patients, with a mean age of 44.7 years, were enrolled with a mean follow-up of 37.7 months (range 6-58 months). All patients, regardless of the group, had satisfactory outcome. According to the DASH score, statistically significant difference favours the TightRope Group (TRG) fixation (p<0.005). The TRG showed the highest mean Constant score (96,1); there are no significative differences between the clinical scores of Hook Plate Group (HPG) and Tension Band Wiring Group (TBWG). However, these two methods showed numerous complications, especially metal-work mobilization and stiffness respectively.

CONCLUSIONS

good results can be overall achieved with primary fixation by the three different surgical methods under investigation. The TightRope system exhibited some advantages such as higher clinical scores, early recovery of range of  movements, longitudinal surgical incision with non-keloid scar, no need for a second surgery and lower rate of complications.

Stand-alone coracoclavicular suture repair achieves very good results in unstable distal clavicle fractures at a minimum follow-up of 1 year

BACKGROUND

The treatment of unstable (Neer type IIB and V) extra-articular distal clavicle fractures remains challenging, especially when encountering a small lateral fragment which does not allow for sufficient screw purchase. It was the purpose of this study to present the clinical and radiologic outcome of a consecutive series of patients treated by a stand-alone coracoclavicular stabilization using a so-called cow-hitch technique with a suture anchor.

METHODS

Nineteen patients were treated with a specific surgical technique for distal clavicle fractures (11 left, 8 right) with either rupture or bony avulsion of the coracoclavicular ligaments. Fourteen patients were examined in our outpatient clinic for the purpose of this study after a mean follow-up of 5 years (1-12.2 years). The examination included scoring according to Constant Murley score (CMS), the American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES), the Subjective Shoulder Value (SSV), and follow-up radiographs. Two additional patients were amenable to a telephone interview.

RESULTS

All patients reported very good subjective results, with a mean SSV of 92% and a mean ASES score of 96%. The CMS resulted in average absolute values of 92 points. Fractures consolidated in 95% of cases. One patient developed an asymptomatic pseudarthrosis. The coracoclavicular distance was restored from 21 mm preoperatively to 11 mm at the final follow-up and finally showed an average side-to-side difference of +1.8 mm. Sports activities were fully resumed after an average of 4.7 months.

CONCLUSION

The coracoclavicular stand-alone cow-hitch suture repair for unstable distal clavicle fractures is a minimally invasive fixation technique without prominent hardware that allows for an anatomic reduction and stable fixation with a low complication and high bony union rate. Both radiographic and clinical long-term results are very satisfactory.

The ligamentous injury pattern in acute acromioclavicular dislocations and its impact on clinical and radiographic parameters

BACKGROUND

Acromioclavicular (AC) joint dislocations are classified according to the Rockwood (RW) classification, which is based on radiographic findings. Several authors have suggested magnetic resonance imaging (MRI) for visualization of the capsuloligamentous structures stabilizing the AC joint. The aim of this study was to describe the ligamentous injury pattern in acute AC joint dislocations by MRI and investigate associations with clinical and radiographic parameters.

METHODS

This prospective study included 45 consecutive patients (5 women and 40 men; mean age, 33.6 years [range, 19-65 years]) with an acute AC joint separation (RW type I in 5, RW type II in 8, RW type III in 18, and RW type V in 14). All patients underwent physical examination of both shoulders, and clinical scores (Subjective Shoulder Value, Constant score, Taft score, and Acromioclavicular Joint Instability Score) were used to evaluate the AC joint clinically as well as radiographically. Post-traumatic radiography included bilateral anteroposterior stress views and bilateral Alexander views to evaluate vertical instability and dynamic posterior translation. MRI was performed for assessment of the AC and coracoclavicular (CC) ligaments and the delto-trapezoidal fascia.

RESULTS

Radiographic and MRI classifications were concordant in 23 of 45 patients (51%), whereas 22 injuries (49%) were misjudged; of these, 6 (13%) were reclassified to a more severe type and 16 (36%), to a less severe type. The integrity of the CC ligaments was found to have a clinical impact on vertical as well as horizontal translation determined by radiographs and on clinical parameters. Among patients with an MRI-confirmed complete disruption of the CC ligaments, 68% showed a radiographic CC difference > 30% and 75% showed complete dynamic posterior translation. Inferior clinical parameters were noted in these patients as compared with patients with intact CC ligaments or partial disruption of the CC ligaments (Constant score of 67 points vs. 49 points [P < .05] and Acromioclavicular Joint Instability Score of 51 points vs. 23 points [P < .05]). The inter-rater and intra-rater reliability for assessment of the ligamentous injury pattern by MRI was fair to substantial (r = 0.37-0.66).

CONCLUSION

The integrity of the CC and AC ligaments found on MRI has an impact on clinical and radiographic parameters.

Synthetic coracoclavicular ligament vs. coracoclavicular suspensory construct for treatment of acromioclavicular dislocation: a biomechanical study

BACKGROUND

A synthetic ligament (LockDown, Worcestershire, England) has become available to treat complete acromioclavicular dislocation with promising clinical results and potential benefit to avoid postoperative loss of reduction. We investigated the biomechanics of this synthetic ligament in a simulated immediate postoperative rehabilitation setting, hypothesizing that the synthetic ligament would demonstrate less superior coracoclavicular displacement to cyclic loading and higher ultimate load-to-failure values than a coracoclavicular suspensory construct.

METHODS

Seven matched-pair cadaveric shoulders (mean age at time of death, 79 years) were loaded cyclically and to failure. One specimen in each pair was randomly assigned to the synthetic ligament or coracoclavicular suspensory construct. Superiorly directed 70-N cyclic loading for 3000 cycles at 1.0 Hz was applied through the clavicle in a fixed scapula simulating physiologic states during immediate postoperative rehabilitation, followed by a load-to-failure test at 120 mm/min.

RESULTS

After 3000 cycles, the superior displacement of the clavicle in the synthetic ligament (9.2 ± 1.1 mm) was 225% greater than in the coracoclavicular suspensory construct (2.8 ± 0.4 mm, 95% confidence interval [CI] 3.4, 8.3; P < .001). Average stiffness of the synthetic ligament (32.8 N/mm) was 60% lower than that of the coracoclavicular suspensory construct (81.9 N/mm, 95% CI 43.3, 54.9; P < .001). Ultimate load-to-failure of the synthetic ligament was 23% (95% CI 37.9, 301.5; P = .016) lower than the coracoclavicular suspensory construct (580.5 ± 85.1 N and 750.2 ± 135.5 N, respectively).

CONCLUSION

In a simulated immediate postoperative cadaveric model, the synthetic ligament demonstrated poorer biomechanics than the coracoclavicular suspensory construct. These findings suggest that a coracoclavicular suspensory construct may be preferable to a synthetic ligament if early rehabilitation is intended.

Truly anatomic coracoclavicular ligament reconstruction with 2 Endobutton devices for acute Rockwood type V acromioclavicular joint dislocations

BACKGROUND

Truly anatomic coracoclavicular ligament reconstruction (TACCR) according to the original insertions is a creative new method for the treatment of severe acromioclavicular separation. This research analyzed the clinical and radiologic results of TACCR in 25 patients with at least 2-year follow-up.

METHODS

The study enrolled 25 patients with Rockwood type V acromioclavicular joint dislocations who underwent TACCR using 2 Endobutton (Smith & Nephew Inc., Andover, MA, USA) devices from May 2013 to October 2015. Patients were assessed with clinical and radiologic follow-up at 3, 6, 12, 18, and 24 months postoperatively. The clinical assessments consisted of the visual analog scale and the Constant score. The radiographic evaluations were performed by measurements of the coracoclavicular distance.

RESULTS

The mean follow-up was 34 ± 6.8 months (range, 24-48 months). The visual analog scale and Constant scores revealed significant advancements from 5 ± 0.9 (range, 4-7) and 45 ± 5.6 (range, 30-54) scores preoperatively to 0 ± 0.5 (range, 0-2) and 95 ± 2.9 (range, 91-98) scores at 24 months postoperatively, respectively. The coracoclavicular distance significantly decreased from 23 ± 5.4 mm (range, 16-34 mm) preoperatively to 8 ± 0.9 mm (range, 7-10 mm) at the final follow-up.

CONCLUSIONS

TACCR represents a safe, reliable and creative surgical technique that yields good to excellent clinical and radiologic outcomes in the treatment of severe acromioclavicular separation.

Biomechanical Comparison of Fracture Risk Created by 2 Different Clavicle Tunnel Preparations for Coracoclavicular Ligament Reconstruction

Background:

An anatomic reconstruction of coracoclavicular (CC) ligaments typically requires drilling tunnels in the clavicle. An increase in fracture complications has been associated with graft tunnel position. A method of drilling clavicle tunnels that would better re-create anatomic function of the CC ligaments without increasing fracture risk would be an improvement.

Purpose:

To evaluate the feasibility of a novel single anterior-to-posterior tunnel technique and compare the biomechanical properties to the 2-tunnel technique in CC ligament reconstruction. The hypothesis was that the single tunnel will yield similar loads to failure as the 2-tunnel technique and better reproduce the native anatomy of the conoid and trapezoid ligaments.

Study Design:

Controlled laboratory study.

Methods:

Eight fresh-frozen matched pairs of human clavicles underwent testing. In 1 specimen of the matched pair, 2 bone tunnels were created as previously described. In the other, a single tunnel was placed obliquely from anterior to posterior. The relative position of the tunnels in relation to the conoid tuberosity was recorded. Specimens were tested on a materials testing machine. The ultimate load to failure, linear stiffness, distance of the conoid tuberosity to the conoid tunnel exit point, and mode of failure were recorded.

Results:

The ultimate load to failure in the single-tunnel group and the 2-tunnel group was 457.2 ± 139.8 and 488.8 ± 170.6, respectively. There was no significant difference (P = .5). The linear stiffness in the single-tunnel group and the 2-tunnel group was 94.6 ± 31.3 and 79.8 ± 33.5, respectively. There was no significant difference (P = .2). The 2-tunnel group had a significantly longer average maximum distance from the conoid tuberosity to the conoid tunnel exit point than the single-tunnel group (6.0 ± 2.1 vs 0.8 ± 1.9 mm; P = .05). The single-tunnel group was consistently more anatomic with regard to its relationship to the conoid tuberosity than the 2-tunnel group.

Conclusion:

The single anterior-to-posterior clavicle tunnel had similar biomechanical properties to the 2-tunnel technique. However, the single-tunnel technique better reproduced the anatomic footprint of the conoid ligament. Utilizing this single-tunnel technique may yield an anatomic advantage that may also reduce the rate of complications caused by posterior wall blowout.

Clinical Relevance:

Acromioclavicular joint injuries are common in collision sports. Surgical management is often indicated to reconstruct the joint. This study assesses the feasibility of a novel surgical approach.

Minimally Invasive Coracoclavicular Ligament Reconstruction With a Flip-Button Technique (MINAR): Clinical and Radiological Midterm Results

BACKGROUND

Acromioclavicular (AC) joint dislocation is a frequent injury in sports.

HYPOTHESIS

A minimally invasive flip-button technique, MINAR (minimally invasive acromioclavicular joint reconstruction), will achieve good clinical and radiographic results in the surgical treatment of high-grade AC joint dislocations.

STUDY DESIGN

Case series; Level of evidence, 4.

METHODS

In this study, 96 patients with AC joint dislocation grades III through V and minimally invasive flip-button repair were identified. Radiographic assessment was performed by use of the Alexander view and by anteroposterior stress radiograph. Clinical outcomes were assessed with the Constant and Taft scores. Factors that influenced outcomes, such as age, time from trauma to surgery, and degree of dislocation, were evaluated.

RESULTS

Of the 96 patients, 83 (86.4%; 3 women and 80 men) were able to participate in clinical and radiographic follow-up. The average age of the participants was 39 years (range, 17-80 years). At a mean follow-up of 39 months (range, 12-78 months), clinical assessment revealed excellent results with a mean Constant score of 94.7 (range, 61-100). Clinical and radiological assessment using the Taft score also showed excellent results, with a mean score of 10.8 (range, 3-12). The mean time period from trauma to surgery was 6 days (range, 0-22 days), and mean duration of surgery was 48 minutes (range, 24-98 minutes). Nine patients (10.8%) underwent revision surgery due to recurrent dislocation (n = 8) or wound infection (n = 1). Radiological assessment showed that 18 patients had sustained a loss of reduction defined as subluxation of 50% of the clavicle shaft width in the vertical plane. However, there was no significant correlation (P = .254) with clinical outcome. Patient age was a relevant factor influencing outcome, as significantly higher outcome values were detected for younger patients (P = .024). No significant influence was shown for the time period from trauma to surgery (P = .336) or degree of dislocation after trauma (P = .987).

CONCLUSION

The MINAR technique is a safe procedure and achieves good to excellent clinical and radiographic results in the surgical treatment of high-grade AC joint dislocations. Despite the simplicity of this technique, the surgeon has to overcome the learning curve to minimize the risk of recurrent dislocation.

Noncomminuted lateral end clavicle fractures associated with coracoclavicular ligament disruption: Technical considerations for optimal anatomic fixation and stability

Distal clavicle fractures associated with coracoclavicular ligament disruption are potentially unstable and necessitate surgical treatment. Current fixation techniques are nonanatomic and do not address relevant aspects of the pathoanatomy. We have developed a technique that uses a unique combination of implants; this permits minimally invasive fixation and stable reduction with a lateral fragment size as small as 5 mm. The surgical technique consists of (1) neutralization of muscular forces on the proximal fragment using a minimally invasive ligament repair device (TightRope™, Arthrex, FL, USA) and (2) internal fixation using a contour-matched locking plate (2.4 mm LCP^® Distal radius plates, Synthes, USA). Technical tips to optimize this new procedure are discussed. The technique can be extended to an “arthroscopic-assisted” method involving arthroscopic coracoclavicular fixation followed by a mini-open plate fixation of the clavicular fragments.

Coracoclavicular ligaments anatomical reconstruction: a feasibility study

BACKGROUND

This study assessed the feasibility of anatomical coracoclavicular (CC) ligaments reconstruction, using three-dimensional (3D) measurement and virtual drilling.

METHODS

One-hundred-and-five 3D shoulder models were constructed using SuperImage software, based on computed tomography (CT) scan data. For each model the attachment sites and footprint dimensions of the CC ligaments were defined and adjusted according to constant anatomical ratios and individual measurement results. Different drilling techniques and 3D measurements were carried out separately on each model.

RESULTS

The collinear drilling technique with one bundle was used to breach the clavicle and/or coracoid process bone cortex in 38 of 105 models (36.2%); the percentage with two bundles was 90.5% (95/105). No cortical breach was observed using the non-collinear drilling technique.

CONCLUSIONS

The non-collinear drilling technique provides the capability to prepare bony tunnels without any risk of cortical breach.

Two large processes at the acromial end of a clavicle: a case report

BACKGROUND/AIM

The present study describes two unusual and large bony processes which were found at the acromial end of a dried human clavicle, due to their rarity and impressive appearance.

DESCRIPTION OF THE CASE

At the anterior border of right dried clavicle we noticed a quadrilateral process having an articular surface at its free end, which probably articulated with the humeral head. At the posterior part of the clavicle inferior surface there was a large conoid process, which replaced the conoid tubercle. The conoid process did not appear any articular surface at its free end to be considered as a coracoclavicular joint.

CONCLUSION

Although the conoid process of the clavicle may be congenital and usually articulates with the coracoid process of the scapula, in our case the conoid process was acquired and presented a rough and slightly sharp tip, without any joint surface. It was very interesting that the quadrilateral process found at the anterior border of the same clavicle was probably forming an accessory joint between the clavicle and the humeral head.

Acromioclavicular joint injuries

OBJECTIVE

To discuss the anatomy and biomechanics of the acromioclavicular (AC) joint, along with the clinical evaluation and treatment of an athlete with an AC joint injury.

DATA SOURCES

I searched MEDLINE from 1970 through 1999 under the key words "acromioclavicular joint," "clavicle," "acromioclavicular separation," and "acromioclavicular dislocation." Knowledge base was an additional source.

DATA SYNTHESIS

AC joint injury is common in athletes and a source of significant morbidity, particularly for athletes in overhead sports. Because this injury can masquerade as other shoulder conditions, the examiner must understand the anatomy and biomechanics of the shoulder in order to perform a systematic clinical evaluation and identify the injury.

CONCLUSIONS/RECOMMENDATIONS

Careful attention to the clinical evaluation allows the clinician to categorize the athlete's AC joint injury and institute appropriate treatment in a timely fashion, thus permitting the athlete to return to sport as quickly and safely as possible.