Graphene nanosheet reinforcement of polyurethane nanocomposite for green and sustainable photoluminescence, superhydrophobic, and anticorrosive paint

A simple and environmentally friendly method was developed for smart and efficient waterborne polyurethane (PUR) paint. Sugarcane bagasse was recycled into reduced graphene oxide nanosheets (rGONSs). Both lanthanide-doped aluminate nanoparticles (LAN; photoluminescent agent, 7-9 nm) and rGONSs (reinforcement agent) were integrated into a waterborne polyurethane to produce a novel photoluminescent, hydrophobic, and anticorrosive nanocomposite coating. Using ferrocene-based oxidation under masked circumstances, graphene oxide nanosheets were produced from sugarcane bagasse. The oxidized semicarbazide (SCB) nanostructures were integrated into polyurethane coatings as a drying, anticorrosion, and crosslinking agent. Polyurethane coatings with varying amounts of phosphor pigment were prepared and subsequently applied to mild steel. The produced paints (LAN/rGONSs@PUR) were tested for their hydrophobicity, hardness, and scratch resistance. Commission Internationale de l'éclairage (CIE) Laboratory parameters and photoluminescence analysis established the opacity and colourimetric properties of the nanocomposite coatings. When excited at 365 nm, the luminescent transparent paints emitted a strong greenish light at 517 nm. The anticorrosion characteristics of the coated steel were investigated. The phosphor-containing (11% w/w) polyurethane coatings displayed the most pronounced anticorrosion capability and long-persistent luminosity. The prepared waterborne polyurethane paints were very photostable and durable.

An Electrochemical Immunosensor Based on Chitosan-Graphene Nanosheets for Aflatoxin B1 Detection in Corn

We reported a highly efficient electrochemical immunosensor utilizing chitosan-graphene nanosheets (CS-GNs) nanocomposites for the detection of aflatoxin B1 (AFB1) in corn samples. The CS-GNs nanocomposites, serving as a modifying layer, provide a significant specific surface area and biocompatibility, thereby enhancing both the electron transfer rate and the efficiency of antibody immobilization. The electrochemical characterization was conducted utilizing both differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Moreover, the antibody concentration, pH, antibody immobilization time, and immunoreaction time, were optimized. The results showed that the current change (ΔI) before and after the immunoreaction demonstrated a strong linear relationship (R2=0.990) with the AFB1 concentration, as well as good specificity and stability. The linear range extended from 0.05 to 25 ng/mL, with a detection limit of 0.021 ng/mL (S/N=3). The immunosensor exhibited a recovery rate ranging from 97.3% to 101.4% in corn samples, showing a promising performance using an efficient method, and indicating a remarkable prospect for the detection of fungal toxins in grains.

Gold-Deposited Graphene Nanosheets for Self-Cleaning Graphene Surface-Enhanced Raman Spectroscopy with Superior Charge-Transfer Contribution

The interaction of graphene with metals initiates charge-transfer interaction-induced chemical enhancements, which critically depend on the doping effect from deposited metallic configurations. In this paper, we have explored the gold nanoparticle-decorated monolayer graphene nanosheets for the large graphene-induced Raman enhancement of adsorbed analytes, indicating the surface-enhanced Raman spectroscopy (SERS) capabilities of metal-doped graphene (G-SERS). Here, the systematically sputtered Au thickness optimization procedure revealed noticeable modifications in the graphene Raman spectra and photoluminescence (PL) background quenching, which indicated favorable charge transfer through n-type doping of chemical vapor deposition-grown graphene nanosheets. The highly consistent, individually distributed morphology of the gold nanoislands over graphene nanosheets depicted a reproducibly uniform G-SERS signal with excellent relative standard deviation values (<5%), resulting in the strongest Raman intensity enhancement factors of ∼108 (MB) (methylene blue) and 107 (DPA) (2,6-pyridinedicarboxylic acid) composed of the weakest PL background. The combined charge-transfer-induced chemical enhancement and electromagnetic enhancement from individual Au nanoislands result in a lowering of detectability down to 10-16 M (MB) and 10-11 M (DPA) concentrations with efficient time-dependent signal stability. Additionally, the GAu demonstrated its effective (∼94.4%) photocatalytic degradation capabilities by decomposing MB dye molecules from a concentration of 1 μM to 2.52 fM within 60 min. Therefore, the prominent charge-transfer contribution through controlled Au decoration over graphene nanosheets provides a potential strategy for fabricating superior SERS sensors and photocatalysts exhibiting adequate signal consistency, stability, and photodegradation efficiency through overcoming the limitations of the traditional sensing platforms.

Microstructure and Properties of Aluminum-Graphene-SiC Matrix Composites after Friction Stir Processing

Enhancing the mechanical properties of conventional ceramic particles-reinforced aluminum (Al 1060) metal matrix composites (AMCs) with lower detrimental phases is difficult. In this research work, AMCs are reinforced with graphene nanosheet (GNS) and hybrid reinforcement (GNS combined with 20% SiC, synthesized by shift-speed ball milling (SSBM), and further fabricated by two-pass friction stir processing (FSP). The effect of GNS content and the addition of SiC on the microstructure and mechanical properties of AMCs are studied. The microstructure, elemental, and phase composition of the developed composite are examined using SEM, EDS, and XRD techniques, respectively. Mechanical properties such as hardness, wear, and tensile strength are analyzed. The experimental results show that the GNS and the SiC are fairly distributed in the Al matrix via SSBM, which is beneficial for the mechanical properties of the composites. The maximum tensile strength of the composites is approximately 171.3 MPa in AMCs reinforced by hybrid reinforcements. The tensile strength of the GNS/Al composites increases when the GNS content increases from 0 to 1%, but then reduces with the further increase in GNS content. The hardness increases by 2.3%, 24.9%, 28.9%, and 41.8% when the Al 1060 is reinforced with 0.5, 1, 2% GNS, and a hybrid of SiC and GNS, respectively. The SiC provides further enhancement of the hardness of AMCs reinforced by GNS. The coefficient of friction decreases by about 7%, 13%, and 17% with the reinforcement of 0.5, 1, and 2% GNS, respectively. Hybrid reinforcement has the lowest friction coefficient (0.41). The decreasing friction coefficient contributes to the self-lubrication of GNSs, the reduction in the contact area with the substrate, and the load-bearing ability of ceramic particles. According to this study, the strengthening mechanisms of the composites may be due to thermal mismatch, grain refinement, and Orowan looping. In summary, such hybrid reinforcements effectively improve the mechanical and tribological properties of the composites.

MoS2 Nanoflowers Grown on Plasma-Induced W-Anchored Graphene for Efficient and Stable H2 Production Through Seawater Electrolysis

Herein, it is found that 3D transition metal dichalcogenide (TMD)-MoS2 nanoflowers-grown on 2D tungsten oxide-anchored graphene nanosheets (MoS2 @W-G) functions as a superior catalyst for the hydrogen evolution reaction (HER) under both acidic and alkaline conditions. The optimized weight ratio of MoS2 @W-G (MoS2 :W-G/1.5:1) in 0.5 M H2 SO4 achieves a low overpotential of 78 mV at 10 mA cm-2 , a small Tafel slope of 48 mV dec-1 , and a high exchange current density (0.321 mA cm⁻2 ). Furthermore, the same MoS2 @W-G composite exhibits stable HER performance when using real seawater, with Faradaic efficiencies of 96 and 94% in acidic and alkaline media, respectively. Density functional theory calculations based on the hybrid MoS2 @W-G structure model confirm that suitable hybridization of 3D MoS2 and 2D W-G nanosheets can lower the hydrogen adsorption: Gibbs free energy (∆GH* ) from 1.89 eV for MoS2 to -0.13 eV for the MoS2 @W-G composite. The excellent HER activity of the 3D/2D hybridized MoS2 @W-G composite arises from abundance of active heterostructure interfaces, optimizing the electrical configuration, thereby accelerating the adsorption and dissociation of H2 O. These findings suggest a new approach for the rational development of alternative 3D/2D TMD/graphene electrocatalysts for HER applications using seawater.

Super-Low Friction Electrification Achieved on Polytetrafluoroethylene Films-Based Triboelectric Nanogenerators Lubricated by Graphene-Doped Silicone Oil

The novel proposal of Wang's triboelectric nanogenerator (TENG) has inspired extensive efforts to explore energy harvesting devices from the living environment for the upcoming low-carbon society. The inevitable friction and wear problems of the tribolayer materials become one of the biggest obstacles for attaining high-performance TENGs. To achieve super-low friction electrification of the TENGs, the tribological and electrical behaviors of the sliding-mode TENGs based on polytetrafluoroethylene (PTFE) films and metallic balls under both dry friction and liquid lubrication conditions were investigated by using a customized testing platform with a ball-on-flat configuration. Most interestingly, a super-low friction coefficient of 0.008 was achieved under graphene-doped silicone oil lubrication. The corresponding wear rate of the PTFE film was drastically decreased to 8.19 × 10-5 mm3/Nm. Simultaneously, the output short-circuit current and open-circuit voltage were enhanced by 6.8 times and 3.0 times, respectively, compared to the dry friction condition. The outstanding triboelectrical performances of the PTFE film when sliding against a steel ball are attributed to the synergistic lubricating effects of the silicone oil and the graphene nanosheets. The current research provides valuable insights into achieving the macro-scale superlubricity of the TENGs in practical industrial applications.

Thermo-Mechanical Performance of Epoxy Hybrid System Based on Carbon Nanotubes and Graphene Nanoparticles

This study focuses on epoxy hybrid systems prepared by incorporating multi-wall carbon nanotubes (MWCNTs) and graphene nanosheets (GNs) at two fixed filler amounts: below (0.1 wt%) and above (0.5 wt%), with varying MWCNT:GN mix ratios. The hybrid epoxy systems exhibited remarkable electrical performance, attributed to the π-π bond interactions between the multi-wall carbon nanotubes and the graphene layers dispersed in the epoxy resin matrix. The material's properties were characterized through dynamic mechanical and thermal analyses over a wide range of temperatures. In addition to excellent electrical properties, the formulated hybrid systems demonstrated high mechanical performance and thermal stability. Notably, the glass transition temperature of the samples reached 255 °C, and high storage modulus values at elevated temperatures were observed. The hybrid systems also displayed thermal stability up to 360 °C in air. By comparing the mechanical and electrical performance, the formulation can be optimized in terms of the electrical percolation threshold (EPT), electrical conductivity, thermostability, and mechanical parameters. This research provides valuable insights for designing advanced epoxy-based materials with multifunctional properties.

CoVSense: Ultrasensitive Nucleocapsid Antigen Immunosensor for Rapid Clinical Detection of Wildtype and Variant SARS-CoV-2

The widespread accessibility of commercial/clinically-viable electrochemical diagnostic systems for rapid quantification of viral proteins demands translational/preclinical investigations. Here, Covid-Sense (CoVSense) antigen testing platform; an all-in-one electrochemical nano-immunosensor for sample-to-result, self-validated, and accurate quantification of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) nucleocapsid (N)-proteins in clinical examinations is developed. The platform's sensing strips benefit from a highly-sensitive, nanostructured surface, created through the incorporation of carboxyl-functionalized graphene nanosheets, and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) conductive polymers, enhancing the overall conductivity of the system. The nanoengineered surface chemistry allows for compatible direct assembly of bioreceptor molecules. CoVSense offers an inexpensive (<$2 kit) and fast/digital response (<10 min), measured using a customized hand-held reader (<$25), enabling data-driven outbreak management. The sensor shows 95% clinical sensitivity and 100% specificity (Ct<25), and overall sensitivity of 91% for combined symptomatic/asymptomatic cohort with wildtype SARS-CoV-2 or B.1.1.7 variant (N = 105, nasal/throat samples). The sensor correlates the N-protein levels to viral load, detecting high Ct values of ≈35, with no sample preparation steps, while outperforming the commercial rapid antigen tests. The current translational technology fills the gap in the workflow of rapid, point-of-care, and accurate diagnosis of COVID-19.

Engineered Highly Porous Polyvinyl Alcohol Hydrogels with Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Graphene Nanosheets for Musculoskeletal Tissue Engineering: Morphology, Water Sorption, Thermal, Mechanical, Electrical Properties, and Biocompatibility

Electroactive composite materials are very promising for musculoskeletal tissue engineering because they can be applied in combination with electrostimulation. In this context, novel graphene-based poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/polyvinyl alcohol (PHBV/PVA) semi-interpenetrated networks (semi-IPN) hydrogels were engineered with low amounts of graphene (G) nanosheets dispersed within the polymer matrix to endow them with electroactive properties. The nanohybrid hydrogels, obtained by applying a hybrid solvent casting-freeze-drying method, show an interconnected porous structure and a high water-absorption capacity (swelling degree > 1200%). The thermal characterization indicates that the structure presents microphase separation, with PHBV microdomains located between the PVA network. The PHBV chains located in the microdomains are able to crystallize; even more after the addition of G nanosheets, which act as a nucleating agent. Thermogravimetric analysis indicates that the degradation profile of the semi-IPN is located between those of the neat components, with an improved thermal stability at high temperatures (>450 °C) after the addition of G nanosheets. The mechanical (complex modulus) and electrical properties (surface conductivity) significantly increase in the nanohybrid hydrogels with 0.2% of G nanosheets. Nevertheless, when the amount of G nanoparticles increases fourfold (0.8%), the mechanical properties diminish and the electrical conductivity does not increase proportionally, suggesting the presence of G aggregates. The biological assessment (C2C12 murine myoblasts) indicates a good biocompatibility and proliferative behavior. These results reveal a new conductive and biocompatible semi-IPN with remarkable values of electrical conductivity and ability to induce myoblast proliferation, indicating its great potential for musculoskeletal tissue engineering.

Improving Thermal Conductivity and Tribological Performance of Polyimide by Filling Cu, CNT, and Graphene

The thermal conductivity, mechanical, and tribological properties of polyimide (PI) composites filled by copper (Cu), carbon nanotube (CNT), graphene nanosheet (GNS), or combination were investigated by molecular dynamics simulation (MD). The simulated results suggested that Cu can improve thermal stability and thermal conductivity, but it reduces mechanical properties and tribological properties. CNT and GNS significantly improved the thermal and tribological properties at low content, but they decreased the properties at high content. In this study, the modification mechanism, friction, and wear mechanism of different fillers on polyimide were revealed by observing the frictional interface evolution process from the atomic scale, extracting the atomic relative concentration, the temperature and velocity distribution at the friction interface, and other microscopic information.

Solution-Processed Functionalized Graphene Film Prepared by Vacuum Filtration for Flexible NO2 Sensors

Large-scale production of graphene nanosheets (GNSs) has led to the availability of solution-processable GNSs on the commercial scale. The controlled vacuum filtration method is a scalable process for the preparation of wafer-scale films of GNSs, which can be used for gas sensing applications. Here, we demonstrate the use of this deposition method to produce functional gas sensors, using a chemiresistor structure from GNS solution-based techniques. The GNS suspension was prepared by liquid-phase exfoliation (LPE) and transferred to a polyvinylidene fluoride (PVDF) membrane. The effect of non-covalent functionalization with Co-porphyrin and Fe-phthalocyanines on the sensor properties was studied. The pristine and functionalized GNS films were characterized using different techniques such as Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and electrical characterizations. The morphological and spectroscopic analyses both confirm that the molecules (Co-porphyrin and Fe-phthalocyanine) were successfully adsorbed onto the GNSs surface through π-π interactions. The chemiresistive sensor response of functionalized GNSs toward the low concentrations of nitrogen dioxide (NO₂) (0.5-2 ppm) was studied and compared with those of the film of pristine GNSs. The tests on the sensing performance clearly showed sensitivity to a low concentration of NO₂ (5 ppm). Furthermore, the chemical modification of GNSs significantly improves NO₂ sensing performance compared to the pristine GNSs. The sensor response can be modulated by the type of adsorbed molecules. Indeed, Co-Por exhibited negative responsiveness (the response of Co-Por-GNS sensors and pristine GNS devices was 13.1% and 15.6%, respectively, after exposure to 0.5 ppm of NO₂). Meanwhile, Fe-Phc-GNSs induced the opposite behavior resulting in an increase in the sensor response (the sensitivity was 8.3% and 7.8% of Fe-Phc-GNSs and pristine GNSs, respectively, at 0.5 ppm NO₂ gas).

Thin-Copper-Layer-Induced Early Fracture in Graphene-Nanosheets (GNSs)-Reinforced Copper-Matrix-Laminated Composites

The strength-ductility trade-off has been a long-standing challenge when designing and fabricating a novel metal matrix composite. In this study, graphene-nanosheets (GNSs)-reinforced copper (Cu)-matrix-laminated composites were fabricated through two methods, i.e., the alternating electrodeposition technique followed by spark plasma sintering (SPS) and direct electrodeposition followed by hot-press sintering. As a result, a Cu-GNS-Cu layered structure formed in the composites with various Cu layer thicknesses. Compared with the pure Cu, the yield strength of the GNS/Cu composites increased. However, the mechanical performance of the GNS/Cu composites was strongly Cu-layer-thickness-dependent, and the GNS/Cu composite possessed a brittle fracture mode when the Cu layer was thin (≤10 μm). The fracture mechanism of the GNS/Cu composites was thoroughly investigated and the results showed that the premature failure of the GNS/Cu composites with a thin Cu layer may be due to the lack of Cu matrix, which can relax the excessive stress intensity triggered by GNSs and delay the crack connection between neighboring GNS layers. This study highlights the soft Cu matrix in balancing the strength and ductility of the GNS/Cu-laminated composites and provides new technical and theoretical support for the preparation and optimization of other laminated metal matrix composites.

Influence of Al-O and Al-C Clusters on Defects in Graphene Nanosheets Derived from Coal-Tar Pitch via Al4C3 Precursor

By treating Al₄C₃ as the precursor and growth environment, graphene nanosheets (GNs) can efficiently be derived from coal-tar pitch, which has the advantages of simple preparation process, high product quality, green environmental protection, low equipment requirements and low preparation cost. However, the defects in the prepared GNs have not been well understood. In order to optimize the preparation process, based on density functional theory calculations, the influence mechanism of Al-O and Al-C clusters on defects in GNs derived from coal-tar pitch via Al₄C₃ precursor has been systematically investigated. With minute quantities of oxygen-containing defects, Al-O and Al-C clusters have been realized in the prepared GNs from X-ray photoelectron spectroscopy analysis. Therefore, the influences of Al-O and Al-C clusters on graphene with vacancy defects and oxygen-containing defects are systematically explored from theoretical energy, electron localization function and charge transfer analysis. It is noted that the remaining Al-O and Al-C clusters in GNs are inevitably from the thermodynamics point of view. On the other hand, the existence of defects is beneficial for the further adsorption of Al-O and Al-C clusters in GNs.

Enhancement of Physical Properties and Corrosion Resistance of Al-Cu-Al2O3/Graphene Nanocomposites by Powder Metallurgy Technique

In this study, we enhanced the adhesion of graphene nanosheets to achieve homogeneous dispersion, consequently improving the electrical and thermal conductivity, coefficient of thermal expansion, and corrosion resistance with an aluminum matrix containing up to 1.5 wt. % graphene. First, 2.5 wt. % Al₂O₃ and varying ratios of graphene up to 1.5 wt. % were coated with 5 wt. % silver nanoparticles to metalize their surfaces. Predetermined portions of coated alumina and graphene were mixed with Al/10 wt. % Cu powder for 45 h. Mixed samples were compacted under 600 MPa and sintered at 565 °C in a vacuum furnace for 60 min with a low heating rate of 2 °C/min. The strengthening effect of the added materials on the density, microstructure, electrical and thermal conductivities, thermal expansion, and corrosion behavior of aluminum were investigated. Excellent adhesion and homogeneous dispersion of the investigated reinforcements were achieved. Three phenomena were observed: (1) an improvement in the densification, electrical and thermal conductivity, thermal expansion, and corrosion rate by adding 10 wt. % Cu to the aluminum matrix; (2) deterioration of the properties of Al/10 wt. % Cu with the addition of 2.5 wt. % alumina nanoparticles; and (3) improved properties with the addition of graphene nanosheets up to 1 wt. % and a decrease in property values beyond 1.5 wt. % graphene content due to the formation of agglomerations and pores in the metal matrix.

Conductive Inks Based on Melamine Intercalated Graphene Nanosheets for Inkjet Printed Flexible Electronics

With the growing number of flexible electronics applications, environmentally benign ways of mass-producing graphene electronics are sought. In this study, we present a scalable mechanochemical route for the exfoliation of graphite in a planetary ball mill with melamine to form melamine-intercalated graphene nanosheets (M-GNS). M-GNS morphology was evaluated, revealing small particles, down to 14 nm in diameter and 0.4 nm thick. The M-GNS were used as a functional material in the formulation of an inkjet-printable conductive ink, based on green solvents: water, ethanol, and ethylene glycol. The ink satisfied restrictions regarding stability and nanoparticle size; in addition, it was successfully inkjet printed on plastic sheets. Thermal and photonic post-print processing were evaluated as a means of reducing the electrical resistance of the printed features. Minimal sheet resistance values (5 kΩ/sq for 10 printed layers and 626 Ω/sq for 20 printed layers) were obtained on polyimide sheets, after thermal annealing for 1 h at 400 °C and a subsequent single intense pulsed light flash. Lastly, a proof-of-concept simple flexible printed circuit consisting of a battery-powered LED was realized. The demonstrated approach presents an environmentally friendly alternative to mass-producing graphene-based printed flexible electronics.

Lithiophilic Carbon Nanofiber/Graphene Nanosheet Composite Scaffold Prepared by a Scalable and Controllable Biofabrication Method for Ultrastable Dendrite-Free Lithium-Metal Anodes

Li metal is regarded as a promising anode for high-energy-density Li batteries, while the limited cycle life and fast capacity decay caused by notorious Li dendrite growth seriously impedes its application. Herein, a robust and highly lithiophilic bacterial cellulose-derived carbon nanofiber@reduced graphene oxide nanosheet (BC-CNF@rGO) composite scaffold is fabricated as a host for dendrite-free Li metal anode through an in situ biofabrication method. The abundant lithiophilic functional groups, conductive 3D network, and excellent mechanical property can effectively regulate uniform Li nucleation and deposition, enable fast reaction kinetics, and alleviate volume change. As a result, the BC-CNF@rGO skeleton achieves exceptional Li plating/stripping performance with a high average Coulombic efficiency of 98.3% over 800 cycles, and a long cycle life span of 5000 h at 2 mA cm^-2 @1 mAh cm^-2 with a low overpotential of ≈15 mV for lithium plating. Furthermore, full cells coupling BC-CNF@rGO-Li anode with LiFePO₄ cathode achieves an unprecedented cycling stability with a long cycle life of 3000 cycles at 1 C. This work sheds light on a promising material design and fabrication strategy for realizing high performance Li metal batteries.

Silicon Nanosheets: An Emerging 2D Photonic Material with a Large Transient Nonlinear Optical Response beyond Graphene

The present work reports on the transient nonlinear optical (NLO) responses of two different types of 2D silicon nanosheets (SiNSs), namely hydride-terminated silicon nanosheets (SiNS-H) and 1-dodecene-functionalized silicon nanosheets (SiNS-dodecene). The main motivation of this study was to extend the knowledge regarding the NLO properties of these Si-based materials, for which very few published studies exist so far. For that purpose, the NLO responses of SiNS-H and SiNS-dodecene were investigated experimentally in the nanosecond regime at 532 and 1064 nm using the Z-scan technique, while the obtained results were compared to those of certain recently studied graphene nanosheets. SiNS-dodecene was found to exhibit the largest third-order susceptibility χ(3) values at both excitation wavelengths, most probably ascribed to the presence of point defects, indicating the importance of chemical functionalization for the efficient enhancement and tailoring of the NLO properties of these emerging 2D Si-based materials. Most importantly, the results demonstrated that the present silicon nanosheets revealed comparable and even larger NLO responses than graphene nanosheets. Undoubtedly, SiNSs could be strong competitors of graphene for applications in 2D-material-based photonics and optoelectronics.

Bi@C Nanospheres with the Unique Petaloid Core-Shell Structure Anchored on Porous Graphene Nanosheets as an Anode for Stable Sodium- and Potassium-Ion Batteries

Bismuth (Bi) has emerged as a prospective candidate as Na-ion and potassium-ion battery anodes because of its unique advantages of low cost, high theoretical gravimetric capacity (386 mAh g^-1), and superior volumetric capacity (3800 mAh cm^-3). However, the low electronic conductivity and the huge volume expansion of Bi during the alloying/dealloying reactions are extremely detrimental to cycling stability, which seriously hinder its practical application. To overcome these issues, we propose a rational design: Bi@C nanospheres with the unique petaloid core-shell structure are synthesized in one step for the first time and then combined with different contents of graphene (GR) nanosheets to form the composites Bi@C@GR. The Bi@C nanospheres with a core-shell structure are beneficial to shortening the transmission path of electrons/ions and reducing the risk from structural rupture of the particles during cycling. In addition, the combination of Bi@C nanospheres and porous GR could greatly improve the conductivity and prevent the aggregation of particles, which is conducive to better cycling stability and rate performance. Consequently, Bi@C@GR-2 presents a superior reversible capacity for sodium storage (300 mAh g^-1 over 80 cycles) and potassium storage (200 mAh g^-1 over 70 cycles) at 0.1 A g^-1. Furthermore, in situ electrochemical impedance spectroscopy and ex situ transmission electron microscopy are carried out to analyze and reflect the kinetic reaction mechanism and the phase change of the Bi@C@GR-2 electrode during the charge/discharge processes.

Growth, Properties, and Applications of Branched Carbon Nanostructures

Nanomaterials featuring branched carbon nanotubes (b-CNTs), nanofibers (b-CNFs), or other types of carbon nanostructures (CNSs) are of great interest due to their outstanding mechanical and electronic properties. They are promising components of nanodevices for a wide variety of advanced applications spanning from batteries and fuel cells to conductive-tissue regeneration in medicine. In this concise review, we describe the methods to produce branched CNSs, with particular emphasis on the most widely used b-CNTs, the experimental and theoretical studies on their properties, and the wide range of demonstrated and proposed applications, highlighting the branching structural features that ultimately allow for enhanced performance relative to traditional, unbranched CNSs.

Protein-assisted scalable mechanochemical exfoliation of few-layer biocompatible graphene nanosheets

A facile method to produce few-layer graphene (FLG) nanosheets is developed using protein-assisted mechanical exfoliation. The predominant shear forces that are generated in a planetary ball mill facilitate the exfoliation of graphene layers from graphite flakes. The process employs a commonly known protein, bovine serum albumin (BSA), which not only acts as an effective exfoliation agent but also provides stability by preventing restacking of the graphene layers. The latter is demonstrated by the excellent long-term dispersibility of exfoliated graphene in an aqueous BSA solution, which exemplifies a common biological medium. The development of such potentially scalable and toxin-free methods is critical for producing cost-effective biocompatible graphene, enabling numerous possible biomedical and biological applications. A methodical study was performed to identify the effect of time and varying concentrations of BSA towards graphene exfoliation. The fabricated product has been characterized using Raman spectroscopy, powder X-ray diffraction, transmission electron microscopy and scanning electron microscopy. The BSA-FLG dispersion was then placed in media containing Astrocyte cells to check for cytotoxicity. It was found that lower concentrations of BSA-FLG dispersion had only minute cytotoxic effects on the Astrocyte cells.

Rheological and tribological characterization of novel modified graphene/oil-based nanofluids using force microscopy

In this study, it is aimed to improve the lubrication and anti-wear characteristics of nanofluids produced by the distribution of silane-modified graphene nanosheets into the base oil without any surfactant or dispersant. Nanofluids are among the hottest research topics currently studied in the literature due to their interesting thermal and rheological properties. Graphene nanosheet with unique physicochemical properties is a good alternative as a nanofluid component and a lubricant. In this study, the behavior of nanofluidic films on the material was investigated by using scanning probe techniques, phase-contrast microscopy, and friction force microscopy techniques. Due to stick-slip behavior and rheological properties that are dominant in the studied ranges, problems were encountered in performing tribological analyzes with friction force microscopy. On the other hand, these results have been beneficial in determining tribological factors in nanoscale. The presented nanofluids showed non-Newtonian behavior at high concentrations and shear rates and shown an improved tribological performance up to 43% in friction coefficient, 91% in wear, and 46% in thermal conductivity compared to the base oil.

Effect of Graphene Nanosheet Addition on the Wettability and Mechanical Properties of Sn-20Bi-xGNS/Cu Solder Joints

Graphene nanosheets (GNSs) have an extensive application in materials modification. In this study, the effects of graphene nanosheets on the wettability of Sn-20Bi lead-free solder on copper (Cu) substrate and the growth behavior of intermetallic compound (IMC) layers at Sn-20Bi-xGNS/Cu solder joints were investigated. The experimental results indicate that the wettability of Sn-20Bi solder firstly diminished and then increased by the addition of GNSs. Meanwhile, a prism-shaped and scallop-shaped Cu6Sn5 IMC layer was clearly observed at the interface of the solder/substrate system. Moreover, it was found that a small amount of GNS addition can significantly inhibit the growth of the IMC layer at the interface as well as refine the microstructure. Additionally, by nano-indentation apparatus, it can be concluded that the hardness and elastic module of IMCs show the same variation trend, which firstly decreased and then increased. Besides, to intuitively demonstrate the reliability of IMCs, the relationship between the hardness and elastic module was established, and the ratio of hardness/elastic module (H/E) was adopted to characterize the reliability of IMCs. The results show that when the addition of GNSs was 0.02 wt%, the value of H/E is the minimum and the solder joint has the highest reliability.

Hybrid Sol-Gel Silica Coatings Containing Graphene Nanosheets for Improving the Corrosion Protection of AA2024-T3

In the present work, nanostructured graphene nanosheets were added to hybrid silica sols and deposited on aluminium alloy A2024-T3 to study the effect on the corrosion behaviour. Sols were prepared using tetraethyl-orthosilicate (TEOS), 3-glycidoxypropyl-trimethoxysilane (GPTMS) and a colloidal silica suspension (LUDOX) as silica precursors with adding chemically modified graphene nanosheets (GN-chem). The graphene nanosheets were modified through a straightforward and simple hydrothermal approach and then, dispersed into a silica sol (SiO2/GN-chem). ATR-FTIR was used to optimize the silica sol-gel synthesis and to confirm the cross-linking of the silica network. The corrosion behaviour of the SiO2/GN-chem coatings was also analysed by electrochemical measurement (potentiodynamic polarization) in 0.05 M NaCl solution. The results showed that the incorporation of modified graphene nanosheets into hybrid silica sol-gel coatings affected the corrosion properties of the substrates. An improvement in the corrosion resistance was observed likely due to the enhanced barrier property and hydrophobic behaviour obtained by incorporation of GN-chem and colloidal silica nanoparticles.

A Holey Graphene Additive for Boosting Performance of Electric Double-Layer Supercapacitors

We demonstrate a facile and effective method, which is low-cost and easy to scale up, to fabricate holey graphene nanosheets (HGNSs) via ultrafast heating during synthesis. Various heating temperatures are used to modify the material properties of HGNSs. First, we use HGNSs as the electrode active materials for electric double-layer capacitors (EDLCs). A synthesis temperature of 900 °C seems to be optimal, i.e., the conductivity and adhesion of HGNSs reach a compromise. The gravimetric capacitance of this HGNS sample (namely HGNS-900) is 56 F·g⁻¹. However, the volumetric capacitance is low, which hinders its practical application. Secondly, we incorporate activated carbon (AC) into HGNS-900 to make a composite EDLC material. The effect of the AC:HGNS-900 ratio on the capacitance, high-rate performance, and cycling stability are systematically investigated. With a proper amount of HGNS-900, both the electrode gravimetric and volumetric capacitances at high rate charging/discharging are clearly higher than those of plain AC electrodes. The AC/HGNS-900 composite is a promising electrode material for nonaqueous EDLC applications.

In Situ Green Synthesis of the New Sandwichlike Nanostructure of Mn3O4/Graphene as Lubricant Additives

Nanoparticles and two-dimensional (2D) nanosheets are well-investigated as lubricant additives, which can significantly reduce frictional energy consumption. However, the tribological properties of the additives will deteriorate because of the occurrence of aggregation in the lubricant and the difficulty in entering the frictional contact area. In the present work, the new sandwichlike nanostructure of Mn₃O₄ nanoparticles and graphene nanosheets (Mn₃O₄@G) has been developed by an in situ green synthesis method; i.e., the impurities of Mn²⁺ ions in crude graphite oxide as the precursor are directly transferred into Mn₃O₄ precipitate between the graphene sheets. The graphene has a lamellar structure without folds and wrinkles, and the Mn₃O₄ nanoparticles are not only uniformly anchored on the graphene surfaces but also intercalated in the layers of the graphene nanosheets. The Mn₃O₄@G exhibits excellent tribological properties and high stability because of a synergistic lubrication effect between the graphene nanosheets and the Mn₃O₄ nanoparticles. Even at an ultralow concentration (0.075 wt %) and a high temperature of 125 °C, the friction coefficient and the wear depth have been reduced by 75% and 97% compared with base oil, respectively. The synthesis method and the Mn₃O₄@G nanocomposite have significant potential in various tribological applications for saving energy.

Scalable Manufactured Self-Healing Strain Sensors Based on Ion-Intercalated Graphene Nanosheets and Interfacial Coordination

Desirable mechanical strength and self-healing performance are very important to highly sensitive and stretchable sensors to meet their practical applications. However, balancing these two key performance parameters is still a great challenge. Herein, we present a simple, large-scale, and cost-efficient route to fabricate autonomously self-healing strain sensors with satisfactory mechanical properties. Specifically, ion-intercalated mechanical milling was utilized to realize the large-scale preparation of graphene nanosheets (GNs). Then, a well-organized GN-nanostructured network was constructed in a rubber matrix based on interfacial metal-ligand coordination. The resultant nanocomposites show desirable mechanical properties (∼5 times higher than that of control sample without interfacial coordination), excellent self-healing performance (even healable in various harsh conditions, for example, underwater, at subzero temperature or exposed in acidic and alkaline conditions), and ultrahigh sensitivity (gauge factor ≈ 45 573.1). The elaborately designed strain sensors offer a feasible approach for the scalable production of self-healing strain-sensing devices, making it promising for further applications, including artificial skin, smart robotics, and other electrical devices.

One-Step In Situ Self-Assembly of Cypress Leaf-Like Cu(OH)2 Nanostructure/Graphene Nanosheets Composite with Excellent Cycling Stability for Supercapacitors

Transition metal hydroxides and graphene composite holds great promise to be the next generation of high performance electrode material for energy storage applications. Here we fabricate the cypress leaf-like Cu(OH)₂ nanostructure/graphene nanosheets composite through one-step in situ synthesis process, employed as a new type of electrode material for high efficiency electrochemical energy storage in supercapacitors. A solution-based two-electrode system is applied to synthesize Cu(OH)₂/graphene hybrid nanostructure, where anodic graphene nanosheets firmly anchor cathodic Cu(OH)₂ nanostructure due to the electrostatic interaction. The in situ self-assembly of Cu(OH)₂/graphene ensures good structural robustness and the cypress leaf-like Cu(OH)₂ nanostructure prompt to form the open and porous morphology. The hybrid structure would facilitate charge transport and effectively mitigate the volume changes during long-term charging/discharging cycles. As a consequence, the Cu(OH)₂/graphene composite exhibits the highest capacitance of 317 mF/cm² at the current density of 1 mA/cm² and superior cyclic stability with no capacitance decay over 20,000 cycles and remarkable rate capability at increased current densities.

Synergistic Effect of Aligned Graphene Nanosheets in Graphene Foam for High-Performance Thermally Conductive Composites

Graphene shows a great potential for high-performance thermally conductive composite applications because of its extremely high thermal conductivity. However, the graphene-based polymer composites reported so far only have a limited thermal conductivity, with the highest thermal conductivity enhancement (TCE) per 1 vol% graphene less than 900%. Here, a continuous network of graphene foam (GF), filled with aligned graphene nanosheets (GNs), is shown to be an ideal filler structure for thermally conductive composite materials. Compared to previous reports, a clear thermal percolation is observed at a low graphene loading fraction. The GNs/GF/natural rubber composite shows the highest TCE of 8100% (6.2 vol% graphene loading) ever reported at room temperature, which gives a record-high TCE per 1 vol% graphene of 1300%. Further analyses reveal a significant synergistic effect between the aligned GNs and 3D interconnected GF, which plays a key role in the formation of a thermal percolation network to remarkably improve the thermal conductivity of the composites. Additionally, the use of this composite for efficient heat dissipation of light-emitting diode (LED) lamps is demonstrated. These findings provide valuable guidance to design high-performance graphene-based thermally conductive materials, and open up the possibility for the use of graphene in high-power electronic devices.

Leukocyte-Repelling Biomimetic Immunomagnetic Nanoplatform for High-Performance Circulating Tumor Cells Isolation

Downstream studies of circulating tumor cells (CTCs), which may provide indicative evaluation information for therapeutic efficacy, cancer metastases, and cancer prognosis, are seriously hindered by the poor purity of enriched CTCs as large amounts of interfering leukocytes still nonspecifically bind to the isolation platform. In this work, biomimetic immunomagnetic nanoparticles (BIMNs) with the following features are designed: i) the leukocyte membrane camouflage, which could greatly reduce homologous leukocyte interaction and actualize high-purity CTCs isolation, is easily extracted by graphene nanosheets; ii) facile antibody conjugation can be achieved through the "insertion" of biotinylated lipid molecules into leukocyte-membrane-coated nanoparticles and streptavidin conjunction; iii) layer-by-layer assembly techniques could integrate high-magnetization Fe₃ O₄ nanoparticles and graphene nanosheets efficiently. Consequently, the resulting BIMNs achieve a capture efficiency above 85.0% and CTCs purity higher than 94.4% from 1 mL blood with 20-200 CTCs after 2 min incubation. Besides, 98.0% of the isolated CTCs remain viable and can be directly cultured in vitro. Moreover, application of the BIMNs to cancer patients' peripheral blood shows good reproducibility (mean relative standard deviation 8.7 ± 5.6%). All results above suggest that the novel biomimetic nanoplatform may serve as a promising tool for CTCs enrichment and detection from clinical samples.

An Approach to the Uniform Dispersion of Graphene Nanosheets in Powder Metallurgy Nickel-Based Superalloy

In this paper, a wet-chemical based method was adopted to acquire the uniform dispersion of graphene nanosheets (GNSs) in a powder metallurgy nickel-based superalloy (FGH96) to fabricate a new GNSs reinforced FGH96 metal matrix composite. The surface of the FGH96 powder was modified using a hydrophilic surfactant named polyvinyl alcohol (PVA), which has good wettability and strong hydrogen bonding between the ⁻OH groups of PVA and oxygen groups of GNSs such as ⁻COOH, ⁻CHO, and ⁻OH. It was shown that the GNSs displayed much better dispersion uniformity on the PVA modified FGH96 powder than the unmodified one. The existence of PVA improved the adsorptive capacity of the GNSs attached on the powder surface and prevented the agglomeration in the following thermal preparation process. Consequently, the micro-hardness of PVA modified composite with 0.1 wt.% GNSs reached 497.9 HV, 3.4% higher than the unmodified FGH96 alloy. Therefore, this preparation process could act as the foundation of a common strategy for the fabrication of GNSs in metal matrix composites with good dispersion uniformity, which may have great potential application in aerospace applications.

In Situ Synthesis of a Sandwich-like Graphene@ZIF-67 Heterostructure for Highly Sensitive Nonenzymatic Glucose Sensing in Human Serums

Metal-organic frameworks (MOFs) have been extensively studied in recent years due to their tunable porosity, huge specific area, and controllable structure. The rich metal centers and large specific area have endowed MOFs with excellent electrochemical activity due to the multiple valence states, but the poor electronic conductivity of MOFs seriously impedes their electrocatalytic performance. Here, a polyhedral Co-based zeolite imidazole frame [Co(mim)₂] _n (denoted as ZIF-67, mim = 2-methylimidazole) is in situ loaded on the two sides of physically exfoliated graphene nanosheets (GSs) at room temperature, and sandwich-like GS@ZIF-67 hybrids with an ordered nanostructure are easily obtained. Compared with each individual component, the as-synthesized GS@ZIF-67 hybrids exhibit higher electrochemical activity toward glucose oxidation. Besides, the hierarchical nanocomposites also show better electrocatalytic performance compared with the same ratio of a physical mixture of GSs and ZIF-67, further demonstrating the synergistic effect between ZIF-67 and GSs. Thus, a highly sensitive nonenzymatic glucose electrochemical sensor is proposed with a linear range of 1-805.5 μM, sensitivity of 1521.1 μA Mm^-1 cm^-2, detection limit of 0.36 μM (S/N = 3), and excellent stability and selectivity. More importantly, the newly fabricated sensor is also successfully applied for glucose determination in human serums with satisfactory results, suggesting its promising potential toward glucose detection in real samples.

A Comparative Study of Particle Size Distribution of Graphene Nanosheets Synthesized by an Ultrasound-Assisted Method

Graphene-based materials are highly interesting in virtue of their excellent chemical, physical and mechanical properties that make them extremely useful as privileged materials in different industrial applications. Sonochemical methods allow the production of low-defect graphene materials, which are preferred for certain uses. Graphene nanosheets (GNS) have been prepared by exfoliation of a commercial micrographite (MG) using an ultrasound probe. Both materials were characterized by common techniques such as X-ray diffraction (XRD), Transmission Electronic Microscopy (TEM), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). All of them revealed the formation of exfoliated graphene nanosheets with similar surface characteristics to the pristine graphite but with a decreased crystallite size and number of layers. An exhaustive study of the particle size distribution was carried out by different analytical techniques such as dynamic light scattering (DLS), nanoparticle tracking analysis (NTA) and asymmetric flow field flow fractionation (AF4). The results provided by these techniques have been compared. NTA and AF4 gave higher resolution than DLS. AF4 has shown to be a precise analytical technique for the separation of GNS of different sizes.

Effect of Graphene Nanosheets Content on Microstructure and Mechanical Properties of Titanium Matrix Composite Produced by Cold Pressing and Sintering

The effect of graphene nanosheet (GNS) reinforcement on the microstructure and mechanical properties of the titanium matrix composite has been discussed. For this purpose, composites with various GNS contents were prepared by cold pressing and sintering at various time periods. Density calculation by Archimedes’ principle revealed that Ti/GNSs composites with reasonable high density (more than 99.5% of theoretical density) were produced after sintering for 5 h. Microstructural analysis by X-ray diffraction (XRD) and a field emission scanning electron microscope (FESEM) showed that TiC particles were formed in the matrix during the sintering process as a result of a titanium reaction with carbon. Higher GNS content as well as sintering time resulted in an increase in TiC particle size and volume fraction. Microhardness and shear punch tests demonstrated considerable improvement of the specimens’ mechanical properties with the increment of sintering time and GNS content up to 1 wt. %. The microhardness and shear strength of 1 wt. % GNS composites were enhanced from 316 HV and 610 MPa to 613 HV and 754 MPa, respectively, when composites sintered for 5 h. It is worth mentioning that the formation of the agglomerates of unreacted GNSs in 1.5 wt. % GNS composites resulted in a dramatic decrease in mechanical properties.

Actuation Behavior of Multilayer Graphene Nanosheets/Polydimethylsiloxane Composite Films

The graphene nanosheets (GNS)/polydimethylsiloxane (PDMS) composite films with out-of-plane dielectric actuation behavior were prepared through a layer-by-layer spin coating process. The GNS-PDMS/PDMS composite films with 1~3 layers of GNS-PDMS films were spin coated on top of the PDMS film. The dielectric, mechanical, and electromechanical actuation properties of the composite films were investigated. The dielectric constant of the GNS-PDMS³/PDMS composite film at 1 kHz is 5.52, which is 1.7 times that of the GNS-PDMS¹/PDMS composite film. The actuated displacement of the GNS-PDMS/PDMS composite films is greatly enhanced by increasing the number of GNS-PDMS layers. This study provides a novel alternative approach for fabricating high-performance actuators with out-of-plane actuation behavior.

Enabling Lithium-Metal Anode Encapsulated in a 3D Carbon Skeleton with a Superior Rate Performance and Capacity Retention in Full Cells

Suppressing the formation of lithium (Li) dendrites is central to implementing Li-metal anode, which has gained growing attention due to its ultrahigh specific capacity and low redox potential. Here, a novel approach is adopted to deposit Li-metal within a rigid three-dimensional (3D) carbon paper (3DCP) network, which consists of a cross-link framework of carbon fibers and graphene nanosheets (GNs). This unique structure yields a uniform distribution of Li-nuclei during the preliminary stage of Li-plating and the formation of a stable solid-electrolyte interface. The as-obtained anode can deliver a high areal capacity of 10 mAh cm^-2 without the dendritic formation after 1000 cycles in a Li@3DCP/LiFePO₄ full cell at 4 C. In addition, the Li@3DCP anode displays low voltage platform (<20 mV at 1 mA cm^-2), high plating/stripping efficiency (99.0%), and long lifespan (>1000 h). When coupled with LiNi_0.8Co_0.15Al_0.05O₂ cathode, the Li@3DCP electrode exhibits a superior rate capability up to 10 C and high temperature performance (60 °C). The unprecedented performance is attributed to the desirable combination of micro/nanostructures in 3DCP, in which carbon fiber framework provides the mechanical stability for volume change, whereas numerous lithiophilicity sites on GNs enable the suppression of Li-dendrite growth.

Free-Standing Sandwich-Type Graphene/Nanocellulose/Silicon Laminar Anode for Flexible Rechargeable Lithium Ion Batteries

Freely deformable and free-standing electrodes together with high capacity are crucial to realizing flexible Li-ion batteries. Herein, a lamellar graphene/nanocellulose/silicon (GN/NC/Si) film assembled by interpenetrated GN nanosheets is synthesized via a facile vacuum-assisted filtration approach accompanied by the covalent cross-linking effect of glutaraldehyde. The hybrid film consists of the highly conductive GN matrix as an effective current collector, hydroxylated silicon nanoparticles (Si NPs) embedded uniformly within GN interlayer and NC as adhesive to cross-link GN and Si NPs. When applied as anode, the GN/NC/Si film exhibits a high reversible capacity of 1251 mA h g^-1 at 100 mA g^-1 after 100 cycles and superior rate capability. More importantly, in the stress-strain test, this film represents robust mechanical strength, which not only provides good flexibility but also accommodates volume change of Si during cycling. By coupling with lithium cobalt oxide as the cathode, the full cell successfully powers a light-emitting diode, even bended and folded, indicating the deformation-tolerant GN/NC/Si film electrode for flexible Li-ion batteries. Therefore, the design of layered nanocomposites will offer the possibility closer to the application of flexible batteries.

Fabrication of NiCo2-Anchored Graphene Nanosheets by Liquid-Phase Exfoliation for Excellent Microwave Absorbers

Graphene nanosheets (GNSs) were prepared by an efficient liquid-phase exfoliation method, and then the NiCo₂/GNS nanohybrids were fabricated using the single-mode microwave-assisted hydrothermal technique. The NiCo₂/GNS composites with different GNS proportions were investigated as microwave absorbers. Morphology investigation suggested that NiCo₂ nanocrystals were uniformly anchored on the GNS without aggregation. The electromagnetic parameters of NiCo₂/GNS nanohybrids could be artificially adjusted by changing the GNS proportion, which led to an exceptional microwave-absorbing performance. A reflection loss (RL) exceeding -20 dB was obtained in the frequency range of 5.3-16.4 GHz for the absorber thicknesses of 1.2-3.2 mm, while an optimal RL of -30 dB was achieved at 11.7 GHz for a thickness of 1.6 mm. The enhanced microwave-absorbing performance indicated that the NiCo₂/10 wt % GNS composite has great potential for use as an excellent microwave absorber.

In Situ Assembly of Ultrathin PtRh Nanowires to Graphene Nanosheets as Highly Efficient Electrocatalysts for the Oxidation of Ethanol

One-dimensional (1D) anisotropic platinum-based nanowires are promising electrocatalysts in polymer electrolyte membrane fuel cells owing to the inherent structural merits. Herein, we report an in situ growth of ultrathin PtRh nanowires (diameters of 2-3 nm) on graphene nanosheets via the oriented attachment pathway. Mechanistic studies reveal that graphene nanosheets play a critical role in the nucleation and growth of PtRh nanowires. The resulting hybrid of PtRh nanowire decorated graphene nanosheets shows outstanding activity and durability toward ethanol electro-oxidation. It exhibits a specific current density of 2.8 mA cm^-2 and a mass-normalized current density of 1 A mg^-1 metal, which are 5.4 and 3.1 times those of the state-of-the-art Pt/C catalyst, respectively. After 2000 cyclic tests, it maintains 86% of the initial electrochemically active surface area, which is larger than that of 63% obtained from the Pt/C catalyst. The superior performance is attributed to the combination of the advantageous 1D morphological motif with the synergistic effects of PtRh alloys and graphene nanosheet support.

Highly Anisotropic Thermal Conductivity of Layer-by-Layer Assembled Nanofibrillated Cellulose/Graphene Nanosheets Hybrid Films for Thermal Management

An anisotropic thermally conductive film with tailorable microstructures and macroproperties is fabricated using a layer-by-layer (LbL) assembly of graphene oxide (GO) and nanofibrillated cellulose (NFC) on a flexible NFC substrate driven by hydrogen bonding interactions, followed by chemical reduction process. The resulting NFC/reduced graphene oxide (RGO) hybrid film reveals an orderly hierarchical structure in which the RGO nanosheets exhibit a high degree of orientation along the in-plane direction. The assembly cycles dramatically increase the in-plane thermal conductivity (λ_X) of the hybrid film to 12.6 W·m^-1·K^-1, while the cross-plane thermal conductivity (λ_Z) shows a lower value of 0.042 W·m^-1·K^-1 in the hybrid film with 40 assembly cycles. The thermal conductivity anisotropy reaches up to λ_X/λ_Z = 279, which is substantially larger than that of similar polymeric nanocomposites, indicating that the LbL assembly on a flexible NFC substrate is an efficient technique for the preparation of polymeric nanocomposites with improved heat conducting property. Moreover, the layered hybrid film composed of 1D NFC and 2D RGO exhibits synergetic mechnical properties with outstanding flexibility and a high tensile strength (107 MPa). The combination of anisotropic thermal conductivity and superior mechanical performance may facilitate the applications in thermal management.

Graphene in Photocatalysis: A Review

In recent years, heterogeneous photocatalysis has received much research interest because of its powerful potential applications in tackling many important energy and environmental challenges at a global level in an economically sustainable manner. Due to their unique optical, electrical, and physicochemical properties, various 2D graphene nanosheets-supported semiconductor composite photocatalysts have been widely constructed and applied in different photocatalytic fields. In this review, fundamental mechanisms of heterogeneous photocatalysis, including thermodynamic and kinetics requirements, are first systematically summarized. Then, the photocatalysis-related properties of graphene and its derivatives, and design rules and synthesis methods of graphene-based composites are highlighted. Importantly, different design strategies, including doping and sensitization of semiconductors by graphene, improving electrical conductivity of graphene, increasing eloectrocatalytic active sites on graphene, strengthening interface coupling between semiconductors and graphene, fabricating micro/nano architectures, constructing multi-junction nanocomposites, enhancing photostability of semiconductors, and utilizing the synergistic effect of various modification strategies, are thoroughly summarized. The important applications including photocatalytic pollutant degradation, H₂ production, and CO₂ reduction are also addressed. Through reviewing the significant advances on this topic, it may provide new opportunities for designing highly efficient 2D graphene-based photocatalysts for various applications in photocatalysis and other fields, such as solar cells, thermal catalysis, separation, and purification.

Protein-Based Graphene Biosensors: Optimizing Artificial Chemoreception in Bilayer Lipid Membranes

Proteinaceous moieties are critical elements in most detection systems, including biosensing platforms. Their potential is undoubtedly vast, yet many issues regarding their full exploitation remain unsolved. On the other hand, the biosensor formats with the higher marketability probabilities are enzyme in nature and electrochemical in concept. To no surprise, alternative materials for hosting catalysis within an electrode casing have received much attention lately to demonstrate a catalysis-coated device. Graphene and ZnO are presented as ideal materials to modify electrodes and biosensor platforms, especially in protein-based detection. Our group developed electrochemical sensors based on these nanomaterials for the sensitive detection of cholesterol using cholesterol oxidase incorporated in stabilized lipid films. A comparison between the two platforms is provided and discussed. In a broader sense, the not-so-remote prospect of quickly assembling a protein-based flexible biosensing detector to fulfill site-specific requirements is appealing to both university researchers and industry developers.

Microstructure and Electrical Properties of AZO/Graphene Nanosheets Fabricated by Spark Plasma Sintering

In this study we report on the sintering behavior, microstructure and electrical properties of Al-doped ZnO ceramics containing 0–0.2 wt. % graphene sheets (AZO-GNSs) and processed using spark plasma sintering (SPS). Our results show that the addition of <0.25 wt. % GNSs enhances both the relative density and the electrical resistivity of AZO ceramics. In terms of the microstructure, the GNSs are distributed at grain boundaries. In addition, the GNSs are also present between ZnO and secondary phases (e.g., ZnAl₂O₄) and likely contribute to the measured enhancement of Hall mobility (up to 105.1 cm²·V⁻¹·s⁻¹) in these AZO ceramics. The minimum resistivity of the AZO-GNS composite ceramics is 3.1 × 10⁻⁴ Ω·cm which compares favorably to the value of AZO ceramics which typically have a resistivity of 1.7 × 10⁻³ Ω·cm.

Rational Design of Graphene-Reinforced MnO Nanowires with Enhanced Electrochemical Performance for Li-Ion Batteries

Recently, transition metal oxides (TMOs) mixed with carbon materials have attracted attention as lithium-ion battery (LIB) anode materials. However, the aggregation issue in TMOs hinders the development of an ideal encapsulation structure with carbon materials. In this paper, we report graphene reinforced MnO nanowires with enhanced electrochemical performance as an anode in LIB. The graphene nanosheets (GNs)/MnO feature was confirmed by transmission electron microscopy, X-ray diffraction, Raman scattering, and X-ray photoelectron spectroscopy. The GNs/MnO nanowires delivered a highly stable discharge capacity of ∼815 mAh g(-1) at a current density of 100 mA g(-1) after 200 cycles, which is 1.5 times higher than that of pure MnO nanowires. This GNs/MnO structure with a specific capacity of ∼995 mAh g(-1) at a current density of 50 mA g(-1) also exhibited excellent Li storage properties. The superior cycling and high rate capability were attributed to the intimate incorporation between the MnO and GNs. The structure of the GNs/MnO nanowires effectively accommodated the volume change of the MnO nanowires and prevented structure collapse during cycling.

Nickel Disulfide-Graphene Nanosheets Composites with Improved Electrochemical Performance for Sodium Ion Battery

Nickel disulfide-graphene nanosheets (NiS2-GNS) composites were successfully synthesized via a simple and mild hydrothermal method. It was revealed by scanning electron microscopy and transmission electron microscopy images that the spherical NiS2 nanoparticles with a diameter of 200-300 nm were uniformly dispersed on graphene nanosheets. Na(+) electrochemical storage properties including cycling performance and high-rate capability of NiS2-GNS composites were investigated, demonstrating a superior reversible capacity of 407 mAh g(-1) with the capacity retention of 77% over 200 cycles at a current density of 0.1 C. Furthermore, even at a large current density of 2 C, a high capacity of 168 mAh g(-1) can still remain, which is much higher than that of pristine NiS2 materials. The enhancement in electrochemical properties might be attributed to the synergetic effect endowed by high conductivity of graphene and novel structure of the electrode material. Combined with the advantages of low cost and environmental benignity, NiS2-GNS composite would be a potential anode material for sodium ion batteries.

Plant Esterase-Chitosan/Gold Nanoparticles-Graphene Nanosheet Composite-Based Biosensor for the Ultrasensitive Detection of Organophosphate Pesticides

As broad-spectrum pesticides, organophosphates (OPs) are widely used in agriculture all over the world. However, due to their neurotoxicity in humans and their increasing occurrence in the environment, there is growing interest in their sensitive and selective detection. This paper reports a new cost-effective plant esterase-chitosan/gold nanoparticles-graphene nanosheet (PLaE-CS/AuNPs-GNs) biosensor for the sensitive detection of methyl parathion and malathion. Highly pure plant esterase is produced from plants at low cost and shares the same inhibition mechanism with OPs as acetylcholinesterase, and then it was used to prepare PLaE-CS/AuNPs-GNs nanocomposites, which were systematically characterized using SEM, TEM, and UV-vis. The PLaE-CS/AuNPs-GNs composite-based biosensor measured as low as 50 ppt (0.19 nM) of methyl parathion and 0.5 ppb (1.51 nM) of malathion (S/N = 3) with a calibration curve up to 200 ppb (760 nM) and 500 ppb (1513.5 nM) for methyl parathion and malathion, respectively. There is also no interference observed from most of common species such as metal ions, inorganic ions, glucose, and citric acid. In addition, its applicability to OPs-contaminated real samples (carrot and apple) was also demonstrated with excellent response recovery. The developed simple, sensitive, and reliable PLaE-CS/AuNPs-GNs composite-based biosensor holds great potential in OPs detection for food and environmental safety.

Irradiated Graphene Loaded with SnO₂ Quantum Dots for Energy Storage

Tin dioxide (SnO2) and graphene are unique strategic functional materials with widespread technological applications, particularly in the areas of solar batteries, optoelectronic devices, and solid-state gas sensors owing to advances in optical and electronic properties. Versatile strategies for microstructural evolution and related performance of SnO2 and graphene composites are of fundamental importance in the development of electrode materials. Here we report that a novel composite, SnO2 quantum dots (QDs) supported by graphene nanosheets (GNSs), has been prepared successfully by a simple hydrothermal method and electron-beam irradiation (EBI) strategies. Microstructure analysis indicates that the EBI technique can induce the exfoliation of GNSs and increase their interlayer spacing, resulting in the increase of GNS amorphization, disorder, and defects and the removal of partial oxygen-containing functional groups on the surface of GNSs. The investigation of SnO2 nanoparticles supported by GNSs (SnO2/GNSs) reveals that the GNSs are loaded with SnO2 QDs, which are dispersed uniformly on both sides of GNSs. Interestingly, the electrochemical performance of SnO2/GNSs indicates that SnO2 QDs supported by a 210 kGy irradiated GNS shows excellent cycle response, high specific capacity, and high reversible capacity. This novel SnO2/GNS composite has potential practical applications in SnO2 electrode materials during Li(+) insertion/extraction.

Highly Sensitive Electrochemical Biosensor for Evaluation of Oxidative Stress Based on the Nanointerface of Graphene Nanocomposites Blended with Gold, Fe3O4, and Platinum Nanoparticles

High levels of H2O2 pertain to high oxidative stress and are associated with cancer, autoimmune, and neurodegenerative disease, and other related diseases. In this study, a sensitive H2O2 biosensor for evaluation of oxidative stress was fabricated on the basis of the reduced graphene oxide (RGO) nanocomposites decorated with Au, Fe3O4, and Pt nanoparticles (RGO/AuFe3O4/Pt) modified glassy carbon electrode (GCE) and used to detect the released H2O2 from cancer cells and assess the oxidative stress elicited from H2O2 in living cells. Electrochemical behavior of RGO/AuFe3O4/Pt nanocomposites exhibits excellent catalytic activity toward the relevant reduction with high selection and sensitivity, low overpotential of 0 V, low detection limit of ∼0.1 μM, large linear range from 0.5 μM to 11.5 mM, and outstanding reproducibility. The as-prepared biosensor was applied in the measurement of efflux of H2O2 from living cells including healthy normal cells and tumor cells under the external stimulation. The results display that this new nanocomposites-based biosensor is a promising candidate of nonenzymatic H2O2 sensor which has the possibility of application in clinical diagnostics to assess oxidative stress of different kinds of living cells.

All Metal Nitrides Solid-State Asymmetric Supercapacitors

Two metal nitrides, TiN porous layers and Fe2 N nanoparticles, are grown uniformly with the assistance of atomic layer deposition on vertically aligned graphene nanosheets and used as the cathode and anode for solid-state supercapacitors, respectively. Full cells are constructed and show good flexibility, high-rate capability, and 98% capacitance retention after 20,000 cycles.

Phthalocyanine-loaded graphene nanoplatform for imaging-guided combinatorial phototherapy

We report a novel cancer-targeted nanomedicine platform for imaging and prospect for future treatment of unresected ovarian cancer tumors by intraoperative multimodal phototherapy. To develop the required theranostic system, novel low-oxygen graphene nanosheets were chemically modified with polypropylenimine dendrimers loaded with phthalocyanine (Pc) as a photosensitizer. Such a molecular design prevents fluorescence quenching of the Pc by graphene nanosheets, providing the possibility of fluorescence imaging. Furthermore, the developed nanoplatform was conjugated with poly(ethylene glycol), to improve biocompatibility, and with luteinizing hormone-releasing hormone (LHRH) peptide, for tumor-targeted delivery. Notably, a low-power near-infrared (NIR) irradiation of single wavelength was used for both heat generation by the graphene nanosheets (photothermal therapy [PTT]) and for reactive oxygen species (ROS)-production by Pc (photodynamic therapy [PDT]). The combinatorial phototherapy resulted in an enhanced destruction of ovarian cancer cells, with a killing efficacy of 90%-95% at low Pc and low-oxygen graphene dosages, presumably conferring cytotoxicity to the synergistic effects of generated ROS and mild hyperthermia. An animal study confirmed that Pc loaded into the nanoplatform can be employed as a NIR fluorescence agent for imaging-guided drug delivery. Hence, the newly developed Pc-graphene nanoplatform has the significant potential as an effective NIR theranostic probe for imaging and combinatorial phototherapy.

Tuning the catalytic activity of graphene nanosheets for oxygen reduction reaction via size and thickness reduction

Currently, the fundamental factors that control the oxygen reduction reaction (ORR) activity of graphene itself, in particular, the dependence of the ORR activity on the number of exposed edge sites remain elusive, mainly due to limited synthesis routes of achieving small size graphene. In this work, the synthesis of low oxygen content (<2.5±0.2 at. %), few layer graphene nanosheets with lateral dimensions smaller than a few hundred nanometers were achieved using a combination of ionic liquid assisted grinding of high purity graphite coupled with sequential centrifugation. We show for the first time that the graphene nanosheets possessing a plethora of edges exhibited considerably higher electron transfer numbers compared to the thicker graphene nanoplatelets. This enhanced ORR activity was accomplished by successfully exploiting the plethora of edges of the nanosized graphene as well as the efficient electron communication between the active edge sites and the electrode substrate. The graphene nanosheets were characterized by an onset potential of -0.13 V vs Ag/AgCl and a current density of -3.85 mA/cm2 at -1 V, which represent the best ORR performance ever achieved from an undoped carbon based catalyst. This work demonstrates how low oxygen content nanosized graphene synthesized by a simple route can considerably impact the ORR catalytic activity and hence it is of significance in designing and optimizing advanced metal-free ORR electrocatalysts.