Mixed Nanosphere Assemblies at a Liquid-Liquid Interface

The in-plane packing of gold (Au), polystyrene (PS), and silica (SiO2) spherical nanoparticle (NP) mixtures at a water-oil interface is investigated in situ by UV-vis reflection spectroscopy. All NPs are functionalized with carboxylic acid such that they strongly interact with amine-functionalized ligands dissolved in an immiscible oil phase at the fluid interface. This interaction markedly increases the binding energy of these nanoparticle surfactants (NPSs). The separation distance between the Au NPSs and Au surface coverage are measured by the maximum plasmonic wavelength (λmax) and integrated intensities as the assemblies saturate for different concentrations of non-plasmonic (PS/SiO2) NPs. As the PS/SiO2 content increases, the time to reach intimate Au NP contact also increases, resulting from their hindered mobility. λmax changes within the first few minutes of adsorption due to weak attractive inter-NP forces. Additionally, a sharper peak in the reflection spectrum at NP saturation reveals tighter Au NP packing for assemblies with intermediate non-plasmonic NP content. Grazing incidence small angle X-ray scattering (GISAXS) and scanning electron microscopy (SEM) measurements confirm a decrease in Au NP domain size for mixtures with larger non-plasmonic NP content. The results demonstrate a simple means to probe interfacial phase separation behavior using in situ spectroscopy as interfacial structures densify into jammed, phase-separated NP films.

Ionic Liquid Interface as a Cell Scaffold

In sharp contrast to conventional solid/hydrogel platforms, water-immiscible liquids, such as perfluorocarbons and silicones, allow the adhesion of mammalian cells via protein nanolayers (PNLs) formed at the interface. However, fluorocarbons and silicones, which are typically used for liquid cell culture, possess only narrow ranges of physicochemical parameters and have not allowed for a wide variety of cell culturing environments. In this paper, it is proposed that water-immiscible ionic liquids (ILs) are a new family of liquid substrates with tunable physicochemical properties and high solvation capabilities. Tetraalkylphosphonium-based ILs are identified as non-cytotoxic ILs, whereon human mesenchymal stem cells are successfully cultured. By reducing the cation charge distribution, or ionicity, via alkyl chain elongation, the interface allows cell spreading with matured focal contacts. High-speed atomic force microscopy observations of the PNL formation process suggest that the cation charge distribution significantly altered the protein adsorption dynamics, which are associated with the degree of protein denaturation and the PNL mechanics. Moreover, by exploiting dissolution capability of ILs, an ion-gel cell scaffold is fabricated. This enables to further identify the significant contribution of bulk subphase mechanics to cellular mechanosensing in liquid-based culture scaffolds.

Liquid Interfacial Coassembly of Plasmonic Arrays and Trace Hydrophobic Nanoplastics in Edible Oils for Robust Identification and Classification by Surface-Enhanced Raman Spectroscopy

The ubiquity of micro-/nanoplastics poses a visible threat to the environment, aquatic organisms, and human beings and has become a global concern. Here, we proposed a liquid interface-based strategy using surface-enhanced Raman spectroscopy to coassemble nanoplastics and gold nanoparticles into a dense and homogeneous plasmonic array, thereby enabling the rapid and sensitive detection of trace nanoplastics. In addition, due to the uniqueness of the oil-water immiscible two-phase interface, we achieved ideal results for the detection of nanoplastics in a complex matrix (e.g., aqueous environment and edible oil) with a detection limit of μg/mL. With the aid of the principal component analysis algorithm, the differentiation and identification of multiple nanoplastic components (e.g., polystyrene, polyethylene, and polyethylene terephthalate) in aqueous environments and common hazards (e.g., Bap and Phe) in edible oil were achieved. Therefore, our self-assembled plasmonic arrays are expected to be used for monitoring environmental pollution and food safety.

Morphological Transitions in Micelles of Amphiphilic Bottlebrushes upon the Adsorption and Compression at the Liquid Interface

Densely grafted comb-like macromolecules (bottlebrushes) with alternating solvophobic and solvophilic side chains were studied in a selective solvent and at the liquid interface using mesoscopic computer simulations. The effects of backbone length and copolymer composition were considered. While self-assembly in solution revealed only spherical aggregates for all ar-chitectures studied, adsorption onto the liquid interface in particular cases resulted in morpho-logical changes, with worm-like aggregates or a continuous monolayer observed. In turn, the compression of macromolecules at the interface also leads to morphological transitions, includ-ing the formation of a mesh-like percolated structure. The obtained results may be useful for the preparation of solid nanoparticles of anisotropic shape or nanostructured ultra-thin copolymer films.

Shape-Reconfigurable Ferrofluids

Ferrofluids (FFs) can adapt their shape to a magnetic field. However, they cannot maintain their shape when the magnetic field is removed. Here, with a magneto-responsive and reconfigurable interfacial self-assembly (MRRIS) process, we show that FFs can be structured by a magnetic field and maintain their shape, like solids, after removing the magnetic field. The competing self-assembly of magnetic and nonmagnetic nanoparticles at the liquid interface endow FFs with both reconfigurability and structural stability. By manipulating the external magnetic field, we show that it is possible to "write" and "erase" the shape of the FFs remotely and repeatedly. To gain an in-depth understanding of the effect of MRRIS on the structure of FFs, we systematically study the shape variation of these liquids under both the static and dynamic magnetic fields. Our study provides a simple yet novel way of manipulating FFs and opens opportunities for the fabrication of all-liquid devices.

In Situ Construction of a Liquid Film Interface with Fast Ion Transport for Solid Sodium-Ion Batteries

Solid sodium-ion batteries (SSIBs) are considered as one of the promising energy storage systems because of their high safety and high energy density. However, the sodium metal anode presents poor wettability with a solid electrolyte, resulting in high interface impedance and dendrite growth, which severely limits their application in practice. Herein, a novel liquid film (Na-BP) interface is constructed between sodium and solid electrolyte (Na₃Hf₂Si₂PO₁₂) with an excellent kinetic mass transfer ability and good fluidity, which could guarantee a close contact and fast charge transfer at interface. The symmetric cells with the designed interface show a high-rate and long-cycle performance and could cycle stably more than 1000 and 700 h at 0.2 and 0.5 mA cm^-2, respectively. The critical current density of the cells can reach 3.6 mA cm^-2 at room temperature, which is the highest value in similar works.

Relaxation and Aging of Nanosphere Assemblies at a Water-Oil Interface

The relaxation and aging of an assembly of spherical nanoparticles (NPs) at a water-oil interface are characterized in situ by grazing incidence X-ray photon correlation spectroscopy. The dynamics of the interfacial assembly is measured while the interface saturates with NPs. Weak attractions between NPs lead to gel-like structures in the assembly, where the in-plane ordering is inhibited by the broad size distribution of the NPs. Structural rearrangements on the length scale of the NP-NP center-to-center distances proceed by intermittent fluctuations instead of continuous cooperative motions. The coexistence of rapid and slow NP populations is confirmed, as commonly observed in soft glass-forming materials. Dynamics are increasingly slowed as the NPs initially segregate to the locally clustered interface. The structural relaxation of the NPs in these localized clusters is 5 orders of magnitude slower than that of free particles in the bulk. When the interface is nearly saturated, the time for relaxation increases suddenly due to the onset of local jamming, and the dynamics slow exponentially afterward until the system reaches collective jamming by cooperative rearrangements. This investigation provides insights into structural relaxations near the glass transition and the evolution of the structure and dynamics of the assemblies as they transition from an isotropic liquid to a dense disordered film.

Effects of femtosecond laser-assisted trephination on donor tissue in liquid interface as compared to applanated interface

Purpose

To evaluate the effects of femtosecond laser‐assisted keratoplasty using a liquid patient interface (L‐PI) as opposed to an applanated interface (A‐PI) on graft quality and functionality markers.

Methods

Pressure measurements during femtosecond laser‐assisted trephination were performed using two groups of 10 porcine eyes. Trephination was performed either in an L‐PI or in an A‐PI setting. Pressure sensor needles placed intravitreally continuously recorded intraocular pressure during trephination. Twenty paired human donor eyes were used to test the morphological quality of donor tissue after trephination in L‐PI and A‐PI settings. Optical coherence tomography (OCT) scans were performed before and after trephination. Images were processed using ImageJ and pixel².

Results

During trephination, pressure measurements with an L‐PI were significantly lower than with an A‐PI (p = 0.0121). Mean pressure during trephination was 78.1 mmHg ± 37.6 mmHg with L‐PI and 188.6 mmHg ± 17.7 mmHg with A‐PI. Trephination in A‐PI produced a significantly larger increase (p < 0.00001) in donor pachymetry than trephination in L‐PI. Significantly lower areas of Descemet folds were achieved in L‐PI trephination than in A‐PI trephination (p < 0.01). There was no significant difference in circularity between A‐PI and L‐PI (p = 0.27). Total time required for trephination was comparable between L‐PI and A‐PI (p = 0.45). Time taken to reach working vacuum was achieved significantly more quickly in L‐PI (p < 0.05).

Conclusion

Femtosecond laser‐assisted L‐PI keratoplasty appears to be a promising method to decrease stress to donor and recipient tissue during femtosecond laser‐assisted trephination. Results showed favourable donor tissue morphology markers after L‐PI trephination.

Off-Resonance Gold Nanobone Films at Liquid Interface for SERS Applications

Extensive effort and research are currently channeled towards the implementation of SERS (Surface Enhanced Raman Spectroscopy) as a standard analytical tool as it has undisputedly demonstrated a great potential for trace detection of various analytes. Novel and improved substrates are continuously reported in this regard. It is generally believed that plasmonic nanostructures with plasmon resonances close to the excitation wavelength (on-resonance) generate stronger SERS enhancements, but this finding is still under debate. In the current paper, we compared off-resonance gold nanobones (GNBs) with on-resonance GNBs and gold nanorods (GNRs) in both colloidal dispersion and as close-packed films self-assembled at liquid-liquid interface. Rhodamine 6G (R6G) was used as a Raman reporter in order to evaluate SERS performances. A 17-, 18-, and 55-fold increase in the Raman signal was observed for nanostructures (off-resonance GNBs, on-resonance GNBs, and on-resonance GNRs, respectively) assembled at liquid-liquid interface compared to the same nanostructures in colloidal dispersion. SERS performances of off-resonance GNBs were superior to on-resonance nanostructures in both cases. Furthermore, when off-resonance GNBs were assembled at the liquid interface, a relative standard deviation of 4.56% of the recorded signal intensity and a limit of detection (LOD) of 5 × 10^-9 M could be obtained for R6G, rendering this substrate suitable for analytical applications.

Effect of Internal Architecture on the Assembly of Soft Particles at Fluid Interfaces

Monolayers of soft colloidal particles confined at fluid interfaces are at the core of a broad range of technological processes, from the stabilization of responsive foams and emulsions to advanced lithographic techniques. However, establishing a fundamental relation between their internal architecture, which is controlled during synthesis, and their structural and mechanical properties upon interfacial confinement remains an elusive task. To address this open issue, which defines the monolayer's properties, we synthesize core-shell microgels, whose soft core can be chemically degraded in a controlled fashion. This strategy allows us to obtain a series of particles ranging from analogues of standard batch-synthesized microgels to completely hollow ones after total core removal. Combined experimental and numerical results show that our hollow particles have a thin and deformable shell, leading to a temperature-responsive collapse of the internal cavity and a complete flattening after adsorption at a fluid interface. Mechanical characterization shows that a critical degree of core removal is required to obtain soft disk-like particles at an oil-water interface, which present a distinct response to compression. At low packing fractions, the mechanical response of the monolayer is dominated by the outer polymer chains forming a corona surrounding the particles within the interfacial plane, regardless of the presence of a core. By contrast, at high compression, the absence of a core enables the particles to deform in the direction orthogonal to the interface and to be continuously compressed without altering the monolayer structure. These findings show how fine, single-particle architectural control during synthesis can be engineered to determine the interfacial behavior of microgels, enabling one to link particle conformation with the resulting material properties.

Compression and Ordering of Microgels in Monolayers Formed at Liquid-Liquid Interfaces: Computer Simulation Studies

Monolayers of polymer microgels adsorbed at the liquid interfaces were studied by dissipative particle dynamics simulations. The results demonstrated that the compressibility of the monolayers can be widely tuned by varying the cross-linking density of the microgels and their (in)compatibility with the immiscible liquids. In particular, the compression of the monolayers (increase of 2D concentration of the microgels) leads to the decrease of their lateral size. Herewith, the shape of the individual soft particles gradually changes from oblate (diluted 2D system) to nearly spherical (compressed monolayer). The polymer concentration profiles plotted along the normal to the interface reveal a nonmonotonous shape with a sharp maximum at the interface. This is a consequence of the shielding effect: saturation of the interface by monomer units of the subchains is driven by minimization of unfavorable contacts between the immiscible liquids and is opposed by elasticity of the network. The decrease of the interfacial tension upon concentration (compression) of the monolayer is quantified. It has been demonstrated that the interfacial tension significantly differs if the solubility of the polymer chains of the microgel network in the liquids changes. These results correlate well with experimental data. The examination of the microgels' crystalline ordering in monolayers demonstrated a nonmonotonous dependency on the compression degree (microgel concentration). Finally, the worsening of the solvent quality leads to the collapse of the microgels in monolayer and nonmonotonous behavior of the interfacial tension.

Assessing Pair Interaction Potentials of Nanoparticles on Liquid Interfaces

The pair interaction potentials of polymer-grafted silica nanoparticles (NPs) at liquid surfaces were determined by scanning electron microscopy, exploiting the nonvolatility of ionic liquids to stabilize the specimens against microscope vacuum. Even at near contact, individual, two-dimensionally well-dispersed NPs were resolved. The potential of mean force, reduced to the pair interaction potential for dilute NPs, was extracted with good accuracy from the radial distribution function, as both NP diameter and grafted polymer chain length were varied. While NP polydispersity somewhat broadened the core repulsion, the pair potential well-approximated a hard sphere interaction, making these systems suitable for model studies of interfacially bound NPs. For short (5 kDa) poly(ethylene glycol) ligands, a weak (< k_B T) long-range attraction was discerned, and for ligands of identical length, pair potentials overlapped for NPs of different diameter; the attraction is suggested to arise from ligand-induced menisci. To understand better the interactions underlying the pair potential, NP surface-binding energies were measured by interfacial tensiometry, and NP contact angles were assessed by atomic force microscopy and transmission electron microscopy.

Apparent Softening of Wet Graphene Membranes on a Microfluidic Platform

Graphene is regarded as the toughest two-dimensional material (highest in-plane elastic properties) and, as a consequence, it has been employed/proposed as an ultrathin membrane in a myriad of microfluidic devices. Yet, an experimental investigation of eventual variations on the apparent elastic properties of a suspended graphene membrane in contact with air or water is still missing. In this work, the mechanical response of suspended monolayer graphene membranes on a microfluidic platform is investigated via scanning probe microscopy experiments. A high elastic modulus is measured for the membrane when the platform is filled with air, as expected. However, a significant apparent softening of graphene is observed when water fills the microfluidic system. Through molecular dynamics simulations and a phenomenological model, we associate such softening to a water-induced uncrumpling process of the suspended graphene membrane. This result may bring substantial modifications on the design and operation of microfluidic devices which exploit pressure application on graphene membranes.

The effect of electronic cigarette and tobacco smoke exposure on COPD bronchial epithelial cell inflammatory responses

Background

Electronic cigarettes (e-cigs) are used to help smoking cessation. However, these devices contain harmful chemicals, and there are safety concerns. We have investigated the effects of e-cigs on the inflammatory response and viability of COPD bronchial epithelial cells (BECs).

Methods

BECs from COPD patients and controls were exposed to e-cig vapor extract (ECVE) and the levels of interleukin (IL)-6, C-X-C motif ligand 8 (CXCL8), and lactate dehydrogenase release were measured. We also examined the effect of ECVE pretreatment on polyinosinic:polycytidylic acid (poly I:C)-stimulated cytokine release from BECs. Parallel experiments using Calu-3 cells were performed. Comparisons were made with cigarette smoke extract (CSE).

Results

ECVE and CSE caused an increase in the release of IL-6 and CXCL8 from Calu-3 cells. ECVE only caused toxicity in BECs and Calu-3 cells. Furthermore, ECVE and CSE dampened poly I:C-stimulated C-X-C motif ligand 10 release from both cell culture models, reaching statistical significance for CSE at an optical density of 0.3.

Conclusion

ECVE caused toxicity and reduced the antiviral response to poly I:C. This raises concerns over the safety of e-cig use.

Amphiphilic Arborescent Copolymers and Microgels: From Unimolecular Micelles in a Selective Solvent to the Stable Monolayers of Variable Density and Nanostructure at a Liquid Interface

Amphiphilic arborescent block copolymers of two generations (G2 and G3) and polymer microgels, obtained via cross-linking of diblock copolymers, were studied in a selective solvent and at liquid interface via dissipative particle dynamics (DPD) simulations. Depending on the primary structure, single arborescent macromolecules in selective solvent can have both core-corona and multicore structures. Self-assembly of the G2, G3, and microgels in the selective solvent is compared with equivalent linear diblock copolymers. The latter self-assemble into spherical micelles of large enough aggregation number. On the contrary, stability of unimolecular micelles is a feature of the arborescent copolymers and microgels, whereas their ability to aggregate is very low. Adsorption of the single molecules at liquid (oil-water) interface leads to their flattening and segregation of the amphiphilic blocks: hydrophilic and hydrophobic blocks are exposed toward water and oil, respectively. Depending on the character of interactions between monomer units, which can be controlled by temperature or solvent(s) quality, Janus, patchy, and nanosegregated structures can be formed within the macromolecules. Their self-assembly at the interface can lead to the formation of both loose and dense monolayers, which can be homogeneous and nanostructured. The pretty fast adsorption kinetics of G2 macromolecules make them efficient stabilizers of emulsions.