Two-Dimensional Interlayer Space Induced Horizontal Transformation of Metal-Organic Framework Nanosheets for Highly Permeable Nanofiltration Membranes

Laminar membranes comprising graphene oxide (GO) and metal-organic framework (MOF) nanosheets benefit from the regular in-plane pores of MOF nanosheets and thus can support rapid water transport. However, the restacking and agglomeration of MOF nanosheets during typical vacuum filtration disturb the stacking of GO sheets, thus deteriorating the membrane selectivity. Therefore, to fabricate highly permeable MOF nanosheets/reduced GO (rGO) membranes, a two-step method is applied. First, using a facile solvothermal method, ZnO nanoparticles are introduced into the rGO laminate to stabilize and enlarge the interlayer spacing. Subsequently, the ZnO/rGO membrane is immersed in a solution of tetrakis(4-carboxyphenyl)porphyrin (H2 TCPP) to realize in situ transformation of ZnO into Zn-TCPP in the confined interlayer space of rGO. By optimizing the transformation time and mass loading of ZnO, the obtained Zn-TCPP/rGO laminar membrane exhibits preferential orientation of Zn-TCPP, which reduces the pathway tortuosity for small molecules. As a result, the composite membrane achieves a high water permeance of 19.0 L m-2  h-1  bar-1 and high anionic dye rejection (>99% for methyl blue).

Ultrathin 2D Cerium-Based Metal-Organic Framework Nanosheet That Boosts Selective Oxidation of Inert C(sp3 )H Bond through Multiphoton Excitation

The development of methodologies for inducing and tailoring activities of catalysts is an important issue in various catalysis. The ultrathin 2D monolayer metal-organic framework (MOF) nanosheets with more accessible active sites and faster diffusion obtained by exfoliating 3D layered MOFs are of great potential as heterogeneous catalysts, but the rational design and preparation of 3D layered MOFs remains a grand challenge. Herein, a novel weak electrostatic interaction strategy to construct a 3D layered cerium-bearing MOF by coordinating chlorine-capped cerium nodes and linear photoactive methyl viologen (MV⁺ ) organic linkers is used. Under multiphoton excitation, the MV⁺ ligands and CeCl chromophores are triggered consecutively to form the high activity chlorine radical (Cl^• ) for activation of inert C(sp³ )H bond through a hydrogen atom transfer. Benefiting from framework confinement effects, synergistic effects of two active sites and/or flexibility of the ultrathin framework nanosheets with high surface utilization, the observed activities increase in the order CeCl₃ /MV⁺  < bulk 3D MOF crystals < 2D MOF nanosheets in photocatalysis. This work not only contributes a new strategy to construct 3D layered MOFs and their ultrathin nanosheets but also paves the way to use nanostructured MOFs to handle synergy of multiple molecular catalysts.

Microneedle-Assisted Transdermal Delivery of 2D Bimetallic Metal-Organic Framework Nanosheet-Based Cascade Biocatalysts for Enhanced Catalytic Therapy of Melanoma

Current conventional treatments for malignant melanoma still face limitations, especially low therapeutic efficacy and serious side effects, and more effective strategies are urgently needed to develop them. Delivering biocatalysts into tumors to efficiently trigger in situ cascade reactions has shown huge potential in producing more therapeutic species or generating stronger tumoricidal effects for augmented tumor therapy. Recently, ultrathin 2D metal-organic framework (MOF) nanosheets have acquired great interest in biocatalysis owing to their large surface areas and abundant accessible active catalytic sites. Herein, an enhanced catalytic therapeutic strategy against melanoma is developed by biocompatible microneedle (MN)-assisted transdermal delivery of a 2D bimetallic MOF nanosheet-based cascade biocatalyst (Cu-TCPP(Fe)@GOD). Profiting from the constructed dissolving MN system, the loaded Cu-TCPP(Fe)@GOD hybrid nanosheets can be accurately delivered into the melanoma sites through skin barriers, and subsequently, trigger the specific cascade catalytic reactions in response to the acidic tumor microenvironment to effectively generate highly toxic hydroxyl radical (^• OH) and deplete glucose nutrient for inducing the death of melanoma cells. The ultimate results prove the high melanoma inhibition effect and biosafety of such therapeutic modality, exhibiting a new and promising strategy to conquer malignant melanoma.

Metal-Organic Framework Nanosheets as Templates to Enhance Performance in Semi-Crystalline Organic Photovoltaic Cells

Optimizing the orientation, crystallinity, and domain size of components within organic photovoltaic (OPV) devices is key to maximizing their performance. Here a broadly applicable approach for enhancing the morphology of bulk heterojunction OPV devices using metal-organic nanosheets (MONs) as additives is demonstrated. It is shown that addition of porphyrin-based MONs to devices with fully amorphous donor polymers lead to small improvements in performance attributed to increased light absorption due to nanosheets. However, devices based on semi-crystalline polymers show remarkable improvements in power conversion efficiency (PCE), more than doubling in some cases compared to reference devices without nanosheets. In particular, this approach led to the development of PffBT4T2OD-MON-PCBM device with a PCE of 12.3%, which to the authors' knowledge is the highest performing fullerene based OPV device reported in literature to date. Detailed analysis of these devices shows that the presence of the nanosheets results in a higher fraction of face-on oriented polymer crystals in the films. These results therefore demonstrate the potential of this highly tunable class of two-dimensional nanomaterials as additives for enhancing the morphology, and therefore performance, of semi-crystalline organic electronic devices.

An Efficient Interfacial Synthesis of Two-Dimensional Metal-Organic Framework Nanosheets for Electrochemical Hydrogen Peroxide Production

Two-dimensional (2D) metal-organic framework nanosheets (MOF NSs) play a vital role in catalysis, but the most preparation is ultrasonication or solvothermal. Herein, a liquid-liquid interfacial synthesis method has been developed for the efficient fabrication of a series of 2D Ni MOF NSs. The active sites could be modulated by readily tuning the ratios of metal precursors and organic linkers (R_M/L ). The Ni MOF NSs display highly R_M/L dependent activities towards 2e oxygen reduction reaction (ORR) to hydrogen peroxide (H₂ O₂ ), where the Ni MOF NSs with the R_M/L of 6 exhibit the optimal near-zero overpotential, ca. 98 % H₂ O₂ selectivity and production rate of ca. 80 mmol g_cat ^-1  h^-1 in 0.1 M KOH. As evidenced by X-ray absorption fine structure spectroscopy, the coordination environment of active sites changed from saturation to unsaturation, and the partially unsaturated metal atoms are crucial to create optimal sites for enhancing the electrocatalysis.

Cascade Reactions Catalyzed by Planar Metal-Organic Framework Hybrid Architecture for Combined Cancer Therapy

Chemical transformation in cellular environment is critical for regulating biological processes and metabolic pathways. Harnessing biocatalytic cascades to produce chemicals of interest has become a research focus to benefit industrial and pharmaceutic areas. Nanoreactors, which can act as artificial cell-like devices to organize cascade reactions, have been recently proposed for potential therapeutic applications for life-threatening illnesses. Among various types of nanomaterials, there is a growing interest in 2D metal-organic frameworks (MOFs). By virtue of the ultralarge specific surface area, high porosity, and structural diversity, 2D MOF nanosheets hold great promise for a broad spectrum of biomedical use. Herein, a unique planar MOF-based hybrid architecture (GMOF-LA) is introduced by incorporating ultrasmall gold nanoparticles (Au NPs) as nanozyme and l-Arginine (l-Arg) as nitric oxide (NO) donor. The prepared Au NPs enable oxidation of glucose into hydrogen peroxide, which drives biocatalytic cascades to covert l-Arg into NO. Interestingly, the well-designed nanosheets not only possess excellent catalytical activity for NO generation, resulting in gas therapeutic effect, but also serve as a desired photosensitizer for photodynamic therapy. This study establishes a good example of exploring bioinspired nanoreactors for cooperative anticancer effect, which may pave the path for future "bench-to-bedside" design of nanomedicine.

Solution-Phase Synthesis of Platinum Nanoparticle-Decorated Metal-Organic Framework Hybrid Nanomaterials as Biomimetic Nanoenzymes for Biosensing Applications

The synthesis of nanomaterials with specific properties and functions as biomimetic nanoenzymes has attracted extensive attention in the past decades due to their great potential to substitute natural enzymes. Herein, a facile and simple method for the preparation of platinum nanoparticle (PtNP)-decorated two-dimensional metal-organic framework (MOF) nanocomposites was developed. A ligand with heme-like structure, Fe(III) tetra(4-carboxyphenyl)porphine chloride (TCPP(Fe)), was applied to synthesize MOF nanosheets (denoted as Cu-TCPP(Fe) nanosheets) in high yield. Ultrathin Cu-TCPP(Fe) nanosheets with thickness less than 10 nm were used as a novel template for the growth of ultrasmall and uniform PtNPs. Significantly, the obtained hybrid nanomaterials (PtNPs/Cu-TCPP(Fe) hybrid nanosheets) exhibit enhanced peroxidase-like activity compared to PtNPs, Cu-TCPP(Fe) nanosheets, and the physical mixture of both due to the synergistic effect. On account of the excellent peroxidase-like activity of PtNPs/Cu-TCPP(Fe) hybrid nanosheets, we established a colorimetric method for sensitive and rapid detection of hydrogen peroxide. Furthermore, by combining with glucose oxidase, a cascade colorimetric method was established to further detect glucose with excellent sensitivity and selectivity.

Growth of Au Nanoparticles on 2D Metalloporphyrinic Metal-Organic Framework Nanosheets Used as Biomimetic Catalysts for Cascade Reactions

Inspired by the multiple functions of natural multienzyme systems, a new kind of hybrid nanosheet is designed and synthesized, i.e., ultrasmall Au nanoparticles (NPs) grown on 2D metalloporphyrinic metal-organic framework (MOF) nanosheets. Since 2D metalloporphyrinic MOF nanosheets can act as the peroxidase mimics and Au NPs can serve as artificial glucose oxidase, the hybrid nanosheets are used to mimic the natural enzymes and catalyze the cascade reactions. Furthermore, the synthesized hybrid nanosheets are used to detect biomolecules, such as glucose. This study paves a new avenue to design nanomaterial-based biomimetic catalysts with multiple complex functions.