1
|
Controlling the Magnetic Responsiveness of Cellulose Nanofiber Particles Embedded with Iron Oxide Nanoparticles. ACS APPLIED BIO MATERIALS 2024; 7:3227-3237. [PMID: 38627897 DOI: 10.1021/acsabm.4c00213] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/21/2024]
Abstract
2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofiber (TOCN) particles, an innovative biobased material derived from wood biomass, have garnered significant interest, particularly in the biomedical field, for their distinctive properties as biocompatible particle adsorbents. However, their microscopic size complicates their separation in liquid media, thereby impeding their application in various domains. In this study, superparamagnetic magnetite nanoparticles (NPs), specifically iron oxide Fe3O4 NPs with an average size of 15 nm, were used to enhance the collection efficiency of TOCN-Fe3O4 composite particles synthesized through spray drying. These composite particles exhibited a remarkable ζ-potential (approximately -50 mV), indicating their high stability in water, as well as impressive magnetization properties (up to 47 emu/g), and rapid magnetic responsiveness within 60 s in water (3 wt % Fe3O4 to TOCN, 1 T magnet). Furthermore, the influence of Fe3O4 NP concentrations on the measurement of the speed of magnetic separation was quantitatively discussed. Additionally, the binding affinity of the synthesized particles for proteins was assessed on a streptavidin-biotin binding system, offering crucial insights into their binding capabilities with specific proteins and underscoring their significant potential as functionalized biomedical materials.
Collapse
|
2
|
Fabrication of a Low Cost Superhydrophobic Substrate for Surface Enhanced Laser-Induced Breakdown Spectroscopy and Its Utility through Identification of Electrolyte Variation for Oral Cancer Detection. ACS Biomater Sci Eng 2024; 10:1153-1161. [PMID: 38227930 PMCID: PMC10865284 DOI: 10.1021/acsbiomaterials.3c01275] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/04/2023] [Revised: 12/19/2023] [Accepted: 12/19/2023] [Indexed: 01/18/2024]
Abstract
Ultratrace elemental detections from a limited volume of samples can offer significant benefits in biomedical fields. However, it can be challenging to concentrate the particles being analyzed in a small area to improve the accuracy of detection. Ring-like deposits on the edges of colloidal droplets are a vexing problem in many applications. Herein, we report ultratrace elemental detection using a superhydrophobic surface-enhanced laser-induced breakdown spectroscopy (SELIBS) substrate fabricated by laser ablation followed by a soft lithography technique. In this work, the SELIBS spectra on a superhydrophobic polydimethylsiloxane (PDMS) substrate replicated from a laser-patterned master Teflon substrate are investigated. This work highlights the application of this newly created superhydrophobic substrate for detecting trace elements in body fluids using SELIBS. The developed PDMS substrate was successfully adopted to investigate the electrolyte variation in serum samples of oral cancer patients and normal volunteers. Principal component analysis (PCA) and match-no-match analysis were used to distinguish the elemental variation in cancer and control groups.
Collapse
|
3
|
microRNA Detection via Nanostructured Biochips for Early Cancer Diagnostics. Int J Mol Sci 2023; 24:7762. [PMID: 37175469 PMCID: PMC10178165 DOI: 10.3390/ijms24097762] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/21/2023] [Revised: 04/15/2023] [Accepted: 04/21/2023] [Indexed: 05/15/2023] Open
Abstract
MicroRNA (miRNA) are constituted of approximately 22 nucleotides and play an important role in the regulation of many physiological functions and diseases. In the last 10 years, an increasing interest has been recorded in studying the expression profile of miRNAs in cancer. Real time-quantitative polymerase chain reaction (RT-qPCR), microarrays, and small RNA sequencing represent the gold standard techniques used in the last 30 years as detection methods. The advent of nanotechnology has allowed the fabrication of nanostructured biosensors which are widely exploited in the diagnostic field. Nanostructured biosensors offer many advantages: (i) their small size allows the construction of portable, wearable, and low-cost products; (ii) the large surface-volume ratio enables the loading of a great number of biorecognition elements (e.g., probes, receptors); and (iii) direct contact of the recognition element with the analyte increases the sensitivity and specificity inducing low limits of detection (LOD). In this review, the role of nanostructured biosensors in miRNA detection is explored, focusing on electrochemical and optical sensing. In particular, four types of nanomaterials (metallic nanoparticles, graphene oxide, quantum dots, and nanostructured polymers) are reported for both detection strategies with the aim to show their distinct properties and applications.
Collapse
|
4
|
Polymer Nanorings with Uranium Specific Clefts for Selective Recovery of Uranium from Acidic Effluents via Reductive Adsorption. ACS Sens 2020; 5:3254-3263. [PMID: 32975114 DOI: 10.1021/acssensors.0c01684] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
Abstract
Nanostructured polymeric materials, functionalized with an appropriate receptor, have opened up newer possibilities for designing a reagent that shows analyte-specific recognition and efficient scavenging of an analyte that has either a detrimental influence on human physiology and environment or on its recovery for further value addition. Higher active surface area, morphological diversity, synthetic tunability for desired surface functionalization, and the ease of regeneration of a nanostructured material for further use have provided such materials with a distinct edge over conventional reagents. The use of a biodegradable polymeric backbone has an added significance owing to the recent concern over the impact of polymers on the environment. Functionalization of biodegradable sodium alginate with AENA (6.85% grafting) as the receptor functionality led to a unique open framework nanoring (NNRG) morphology with a favorable spatial orientation for specific recognition and efficient binding to uranyl ions (U) in an aqueous medium over a varied pH range. Nanoring morphology was confirmed by transmission electron microscopy and atomic force microscopy images. The nanoscale design maximizes the surface area for the molecular scavenger. A combination of all these features along with the reversible binding phenomenon has made NNRG a superior reagent for specific, efficient uptake of UO22+ species from an acidic (pH 3-4) solution and compares better than all existing UO22+-scavengers reported till date. This could be utilized for the recovery of uranyl species from a synthetic acidic effluent of the nuclear power. The results of the U uptake experiments reveal a maximum adsorption capacity of 268 mg of U per g of NNRG in a synthetic nuclear effluent. X-ray photoelectron spectroscopy studies revealed a reductive complexation process and stabilization of U(IV)-species in adsorbed uranium species (U@NNRG).
Collapse
|
5
|
Influence of Silver Addition on Structure, Martensite Transformations and Mechanical Properties of TiNi-Ag Alloy Wires for Biomedical Application. MATERIALS 2020; 13:ma13214721. [PMID: 33105862 PMCID: PMC7660057 DOI: 10.3390/ma13214721] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/02/2020] [Revised: 10/18/2020] [Accepted: 10/20/2020] [Indexed: 11/26/2022]
Abstract
The microstructural and functional behavior of TiNi-based wires with a silver content of 0–1.5 at.% was evaluated. The concentration range for Ag doping determined for the TiNi wires with potential for the medical industry was 0–0.2 at.%. Microstructure analysis of TiNi wires with different silver contents at room temperature indicated a multiphase structural state. Various internal structures with tangled grain boundaries were formed by intense plastic deformation. The nanocrystalline structure and phase state of wire with the minimum silver content (0.1 at.% Ag) provide full shape recovery, the greatest reversible strain, and optimal strength and ductility. TiNi ingots with a high Ag content (0.5–1.5 at.%) cracked under minimum load due to excess silver that crystallized along the grain boundaries and broke cohesion bonds between the TiNi grains.
Collapse
|
6
|
Designing and Fabricating Nano-structured and Micro-structured Radiation Shields for Protection against CBCT Exposure. MATERIALS 2020; 13:ma13194371. [PMID: 33008078 PMCID: PMC7579218 DOI: 10.3390/ma13194371] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/19/2020] [Revised: 09/21/2020] [Accepted: 09/28/2020] [Indexed: 12/14/2022]
Abstract
Researchers have always been interested in finding new and effective materials for protection against radiation. This experimental study aimed to design and fabricate new types of nano-material and micro-material based shields against the ionizing effect of cone beam computed tomography (CBCT) X-rays. To fabricate a flexible prototype, we added dioctyl phthalate (DOP) oil to emulsion polyvinyl chloride (PVC) powder. The paste was mixed and dispersed. Then, nano- and micro-powders of WO3 and Bi2O3 were added to the paste, with the weight ratio of 20% PVC, 20% DOP, and 60% nano- and micro-metals. Using an ultrasonic mixer, the polymer matrix and metals were mixed and a paste with a thick texture was developed. The resultant paste was poured into glass molds and the molds were then heated in an oven. After cooling, the resultant sheets were selected for further experiments. A CBCT unit and dosimeter were used to evaluate the characterization and X-ray shielding properties of the fabricated prototypes. The half-value layers (HVL) for nano-WO3, micro-WO3, nano-Bi2O3, and micro-Bi2O3 were 0.0390, 0.0524, 0.0351, and 0.0374 cm, respectively. In addition, the linear attenuation coefficient (µ) for these materials were 17.77, 13.20, 19.71, and 18.5 cm−1, respectively. The findings indicate that nano-structured samples are more effective in the attenuation of X-ray energy. The nano-structured WO3 prototype was nearly 34% more efficient in attenuating radiation compared to the micro-structured WO3 prototype. This difference in nano- and micro-structured Bi2O3 prototypes was 6.5%.
Collapse
|
7
|
Enhancing Magneto-Ionic Effects in Magnetic Nanostructured Films via Conformal Deposition of Nanolayers with Oxygen Acceptor/Donor Capabilities. ACS APPLIED MATERIALS & INTERFACES 2020; 12:14484-14494. [PMID: 32129067 DOI: 10.1021/acsami.9b19363] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Effective manipulation of the magnetic properties of nanostructured metallic alloys, exhibiting intergrain porosity (i.e., channels) and conformally coated with insulating oxide nanolayers, with an electric field is demonstrated. Nanostructured Co-Pt films are grown by electrodeposition (ED) and subsequently coated with either AlOx or HfOx by atomic layer deposition (ALD) to promote magneto-ionic effects (i.e., voltage-driven ion migration) during electrolyte gating. Pronounced variations in coercivity (HC) and magnetic moment at saturation (mS) are found at room temperature after biasing the heterostructures. The application of a negative voltage results in a decrease of HC and an increase of mS, whereas the opposite trend is achieved for positive voltages. Although magneto-ionic phenomena are already observed in uncoated Co-Pt films (because of the inherent presence of oxygen), the ALD oxide nanocoatings serve to drastically enhance the magneto-ionic effects because of partially reversible oxygen migration, driven by voltage, across the interface between AlOx or HfOx and the nanostructured Co-Pt film. Co-Pt/HfOx heterostructures exhibit the most significant magneto-electric response at negative voltages, with an increase of mS up to 76% and a decrease of HC by 58%. The combination of a nanostructured magnetic alloy and a skinlike insulating oxide nanocoating is shown to be appealing to enhance magneto-ionic effects, potentially enabling electrolyte-gated magneto-ionic technology.
Collapse
|
8
|
Influence of nanostructured calcium aluminate and calcium silicate on the liver: histological and unbiased stereological analysis. Int Endod J 2019; 52:1162-1172. [PMID: 30802977 DOI: 10.1111/iej.13105] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/28/2018] [Accepted: 02/22/2019] [Indexed: 12/11/2022]
Abstract
AIM To examine the potential systemic toxicity of nanostructured materials based on calcium silicate and calcium aluminate, for potential application in Dentistry. METHODOLOGY Twenty-four Albino Wistar rats aged 2 months were used as an in vivo animal model for subcutaneous implantation of the investigated materials, placed in polyethylene tubes. Thirty days after implantation, the livers of the rats were analysed and following histological and stereological parameters were evaluated for volume density of hepatocytes and blood sinusoids, number and numerical density of hepatocytes, surface of hepatocytes and their nucleuses, nucleocytoplasmic ratio and mitotic index of hepatocytes. Stereological measurements were achieved using Cavalieri's principle, with grid P2 and unbiased analysis. Additionally, immunohistochemistry studies were performed to further analyse changes in liver tissue. Several haematological and biochemical parameters of blood of experimental animals were also analysed, as well as local tissue reactions around the implants. Statistical analysis was performed using parametric (anova and t-test) and nonparametric tests (Kruskal-Wallis and Mann-Whitney U-test) depending on data distribution. RESULTS Implanted dental cements led to an increase in stereological and histological parameters in liver tissue compared to control rats. Although the investigated parameters mostly showed significant differences between control and experimental animals, the liver tissue of the experimental animals did not have visible signs of pathological changes. This was supported by the analysis of blood parameters which were not significantly different between control and experimental animals. Also, the subcutaneous tissues had minimal inflammatory reactions. Immunohistochemistry studies revealed that nanostructured materials induced proliferation of hepatocytes, but that the immunological response to the materials was not strong enough to induce proliferation of immunoreactive cells in liver in the observed time period. CONCLUSIONS This study was performed as a contribution to the attestation of the biocompatibility of dental cements based on calcium silicate and calcium aluminate. Although these materials induced several changes in the liver structure, they were not clinically relevant and represent a normal and reversible response of the liver to the presence of biocompatible materials in the body. Blood and immunohistochemistry analyses and local tissue reactions further confirmed that these materials possess good biocompatible potential.
Collapse
|
9
|
Effect of Hf-doping on electrochemical performance of anatase TiO 2 as an anode material for lithium storage. ROYAL SOCIETY OPEN SCIENCE 2018; 5:171811. [PMID: 30110421 PMCID: PMC6030266 DOI: 10.1098/rsos.171811] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/09/2017] [Accepted: 05/01/2018] [Indexed: 06/08/2023]
Abstract
Hafnium-doped titania (Hf/Ti = 0.01; 0.03; 0.05) had been facilely synthesized via a template sol-gel method on carbon fibre. Physico-chemical properties of the as-synthesized materials were characterized by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, energy-dispersive X-ray analysis, scanning transmission electron microscopy, X-ray photoelectron spectroscopy, thermogravimetry analysis and Brunauer-Emmett-Teller measurements. It was confirmed that Hf4+ substitute in the Ti4+ sites, forming Ti1-x Hf x O2 (x = 0.01; 0.03; 0.05) solid solutions with an anatase crystal structure. The Ti1-x Hf x O2 materials are hollow microtubes (length of 10-100 µm, outer diameter of 1-5 µm) composed of nanoparticles (average size of 15-20 nm) with a surface area of 80-90 m2 g-1 and pore volume of 0.294-0.372 cm3 g-1. The effect of Hf ion incorporation on the electrochemical behaviour of anatase TiO2 in the Li-ion battery anode was investigated by galvanostatic charge/discharge and electrochemical impedance spectroscopy. It was established that Ti0.95Hf0.05O2 shows significantly higher reversibility (154.2 mAh g-1) after 35-fold cycling at a C/10 rate in comparison with undoped titania (55.9 mAh g-1). The better performance offered by Hf4+ substitution of the Ti4+ into anatase TiO2 mainly results from a more open crystal structure, which has been achieved via the difference in ionic radius values of Ti4+ (0.604 Å) and Hf4+ (0.71 Å). The obtained results are in good accord with those for anatase TiO2 doped with Zr4+ (0.72 Å), published earlier. Furthermore, improved electrical conductivity of Hf-doped anatase TiO2 materials owing to charge redistribution in the lattice and enhanced interfacial lithium storage owing to increased surface area directly depending on the Hf/Ti atomic ratio have a beneficial effect on electrochemical properties.
Collapse
|
10
|
Metal-Tunable Self-Assembly of Hierarchical Structure in Mussel-Inspired Peptide Films. ACS NANO 2018; 12:2160-2168. [PMID: 29385330 DOI: 10.1021/acsnano.7b07905] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
Bottom-up control over structural hierarchy from the nanoscale through the macroscale is a critical aspect of biological materials fabrication and function, which can inspire production of advanced materials. Mussel byssal threads are a prime example of protein-based biofibers in which hierarchical organization of protein building blocks coupled via metal complexation leads to notable mechanical behaviors, such as high toughness and self-healing. Using a natural amino acid sequence from byssal thread proteins, which functions as a pH-triggered self-assembly point, we created free-standing peptide films with complex hierarchical organization across multiple length scales that can be controlled by inclusion of metal ions (Zn2+ and Cu2+) during the assembly process. Additionally, analysis of film mechanical performance indicates that metal coordination bestows up to an order of magnitude increase in material stiffness, providing a paradigm for creating tunable polymeric materials with multiscale organizational structure.
Collapse
|
11
|
Prospects of Nanostructure Materials and Their Composites as Antimicrobial Agents. Front Microbiol 2018; 9:422. [PMID: 29593676 PMCID: PMC5855923 DOI: 10.3389/fmicb.2018.00422] [Citation(s) in RCA: 84] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2017] [Accepted: 02/22/2018] [Indexed: 11/13/2022] Open
Abstract
Nanostructured materials (NSMs) have increasingly been used as a substitute for antibiotics and additives in various products to impart microbicidal effect. In particular, use of silver nanoparticles (AgNPs) has garnered huge researchers' attention as potent bactericidal agent due to the inherent antimicrobial property of the silver metal. Moreover, other nanomaterials (carbon nanotubes, fullerenes, graphene, chitosan, etc.) have also been studied for their antimicrobial effects in order ensure their application in widespread domains. The present review exclusively emphasizes on materials that possess antimicrobial activity in nanoscale range and describes their various modes of antimicrobial action. It also entails broad classification of NSMs along with their application in various fields. For instance, use of AgNPs in consumer products, gold nanoparticles (AuNPs) in drug delivery. Likewise, use of zinc oxide nanoparticles (ZnO-NPs) and titanium dioxide nanoparticles (TiO2-NPs) as additives in consumer merchandises and nanoscale chitosan (NCH) in medical products and wastewater treatment. Furthermore, this review briefly discusses the current scenario of antimicrobial nanostructured materials (aNSMs), limitations of current research and their future prospects. To put various perceptive insights on the recent advancements of such antimicrobials, an extended table is incorporated, which describes effect of NSMs of different dimensions on test microorganisms along with their potential widespread applications.
Collapse
|
12
|
Synthesis of Uniquely Structured Yolk-Shell Metal Oxide Microspheres Filled with Nitrogen-Doped Graphitic Carbon with Excellent Li-Ion Storage Performance. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2017; 13:1701585. [PMID: 28834282 DOI: 10.1002/smll.201701585] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/15/2017] [Revised: 06/30/2017] [Indexed: 06/07/2023]
Abstract
Novel structured composite microspheres of metal oxide and nitrogen-doped graphitic carbon (NGC) have been developed as efficient anode materials for lithium-ion batteries. A new strategy is first applied to a one-pot preparation of composite (FeOx -NGC/Y) microspheres via spray pyrolysis. The FeOx -NGC/Y composite microspheres have a yolk-shell structure based on the iron oxide material. The void space of the yolk-shell microsphere is filled with NGC. Dicyandiamide additive plays a key role in the formation of the FeOx -NGC/Y composite microspheres by inducing Ostwald ripening to form a yolk-shell structure based on the iron oxide material. The FeOx -NGC/Y composite microspheres with the mixed crystal structure of rock salt FeO and spinel Fe3 O4 phases show highly superior lithium-ion storage performances compared to the dense-structured FeOx microspheres with and without carbon material. The discharge capacities of the FeOx -NGC/Y microspheres for the 1st and 1000th cycle at 1 A g-1 are 1423 and 1071 mAh g-1 , respectively. The microspheres have a reversible discharge capacity of 598 mAh g-1 at an extremely high current density of 10 A g-1 . Furthermore, the strategy described in this study is generally applied to multicomponent metal oxide-carbon composite microspheres with yolk-shell structures based on metal oxide materials.
Collapse
|
13
|
Nanostructured Ti-Zr-Pd-Si-(Nb) bulk metallic composites: Novel biocompatible materials with superior mechanical strength and elastic recovery. J Biomed Mater Res B Appl Biomater 2014; 103:1569-79. [PMID: 25533018 DOI: 10.1002/jbm.b.33346] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/16/2014] [Revised: 10/27/2014] [Accepted: 12/02/2014] [Indexed: 11/10/2022]
Abstract
The microstructure, mechanical behaviour, and biocompatibility (cell culture, morphology, and cell adhesion) of nanostructured Ti45 Zr15 Pd35- x Si5 Nbx with x = 0, 5 (at. %) alloys, synthesized by arc melting and subsequent Cu mould suction casting, in the form of rods with 3 mm in diameter, are investigated. Both Ti-Zr-Pd-Si-(Nb) materials show a multi-phase (composite-like) microstructure. The main phase is cubic β-Ti phase (Im3m) but hexagonal α-Ti (P63/mmc), cubic TiPd (Pm3m), cubic PdZr (Fm3m), and hexagonal (Ti, Zr)5 Si3 (P63/mmc) phases are also present. Nanoindentation experiments show that the Ti45 Zr15 Pd30 Si5 Nb5 sample exhibits lower Young's modulus than Ti45 Zr15 Pd35 Si5 . Conversely, Ti45 Zr15 Pd35 Si5 is mechanically harder. Actually, both alloys exhibit larger values of hardness when compared with commercial Ti-40Nb, (HTi-Zr-Pd-Si ≈ 14 GPa, HTi-Zr-Pd-Si-Nb ≈ 10 GPa and HTi-40Nb ≈ 2.7 GPa). Concerning the biological behaviour, preliminary results of cell viability performed on several Ti-Zr-Pd-Si-(Nb) discs indicate that the number of live cells is superior to 94% in both cases. The studied Ti-Zr-Pd-Si-(Nb) bulk metallic system is thus interesting for biomedical applications because of the outstanding mechanical properties (relatively low Young's modulus combined with large hardness), together with the excellent biocompatibility.
Collapse
|
14
|
Graphene-based polyaniline arrays for deoxyribonucleic acid electrochemical sensor: effect of nanostructure on sensitivity. ACS APPLIED MATERIALS & INTERFACES 2014; 6:19050-19056. [PMID: 25340334 DOI: 10.1021/am504998e] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
DNA detection sensitivity can be improved by carefully controlling the texture of the sensor substrate, which was normally investigated on metal or metal oxide nanostructured platform. Morphology effects on the biofunctionalization of polymer micro/nanoelectrodes have not been investigated in detail. To extend this topic, we used graphene oxide (GNO) as the supporting material to prepare graphene-based polyaniline nanocomposites with different morphologies as a model for comparing their DNA sensing behaviors. Owing to GNO serving as an excellent support or template for nucleation and growth of polyaniline (PANI), PANI nanostructures grown on GNO substrate were successfully obtained. However, if GNO supporting was absent, the obtained PANI nanowires showed a connected network. Furthermore, adjustment of reaction time can be used for dominating the topographies of PANI-GNO nanocomposites, meaning that different reaction times resulted in various formations of PANI-GNO nanocomposites, including small horns (5 and 12 h), vertical arrays (18 h), and nanotips (24 h). The next-step electrochemical data showed that the DNA electrochemical sensors constructed on the different morphologies possessed different ssDNA surface coverage and hybridization efficiency. Compared with other morphologies of PANI-GNO nanocomposite (5, 12, and 24 h), vertical arrays (18 h) exhibited the highest sensitivity (2.08 × 10(-16) M, 2 orders of magnitude lower than others). It is can be concluded that this nanocomposite with higher surface area and more accessible space can provide an optimal balance for DNA immobilization and DNA hybridization detection.
Collapse
|
15
|
Phototropic growth control of nanoscale pattern formation in photoelectrodeposited Se-Te films. Proc Natl Acad Sci U S A 2013; 110:19707-12. [PMID: 24218617 DOI: 10.1073/pnas.1315539110] [Citation(s) in RCA: 20] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022] Open
Abstract
Photoresponsive materials that adapt their morphologies, growth directions, and growth rates dynamically in response to the local incident electromagnetic field would provide a remarkable route to the synthesis of complex 3D mesostructures via feedback between illumination and the structure that develops under optical excitation. We report the spontaneous development of ordered, nanoscale lamellar patterns in electrodeposited selenium-tellurium (Se-Te) alloy films grown under noncoherent, uniform illumination on unpatterned substrates in an isotropic electrolyte solution. These inorganic nanostructures exhibited phototropic growth in which lamellar stripes grew toward the incident light source, adopted an orientation parallel to the light polarization direction with a period controlled by the illumination wavelength, and showed an increased growth rate with increasing light intensity. Furthermore, the patterns responded dynamically to changes during growth in the polarization, wavelength, and angle of the incident light, enabling the template-free and pattern-free synthesis, on a variety of substrates, of woodpile, spiral, branched, or zigzag structures, along with dynamically directed growth toward a noncoherent, uniform intensity light source. Full-wave electromagnetic simulations in combination with Monte Carlo growth simulations were used to model light-matter interactions in the Se-Te films and produced a model for the morphological evolution of the lamellar structures under phototropic growth conditions. The experiments and simulations are consistent with a phototropic growth mechanism in which the optical near-field intensity profile selects and reinforces the dominant morphological mode in the emergent nanoscale patterns.
Collapse
|