Momentum-Resolved Electronic Structures and Strong Electronic Correlations in Graphene-like Nitride Superconductors

Although transition-metal nitrides have been widely applied for several decades, experimental investigations of their high-resolution electronic band structures are rare due to the lack of high-quality single-crystalline samples. Here, we report on the first momentum-resolved electronic band structures of titanium nitride (TiN) films, which are remarkable nitride superconductors. The measurements of the crystal structures and electrical transport properties confirmed the high quality of these films. More importantly, from a combination of high-resolution angle-resolved photoelectron spectroscopy and first-principles calculations, the extracted Coulomb interaction strength of TiN films can be as large as 8.5 eV, whereas resonant photoemission spectroscopy yields a value of 6.26 eV. These large values of Coulomb interaction strength indicate that superconducting TiN is a strongly correlated system. Our results uncover the unexpected electronic correlations in transition-metal nitrides, potentially providing a perspective not only to understand their emergent quantum states but also to develop their applications in quantum devices.

Urchin-Like Mesoporous TiN Hollow Sphere Enabling Promoted Electrochemical Kinetics of Bromine-Based Flow Batteries

Bromine-based flow batteries (BFB) have always suffered from poor kinetics due to the sluggish Br3 -/Br- redox, hindering their practical applications. Developing cathode materials with high catalytic activity is critical to address this challenge. Herein, the in-depth investigation for the free energy of the bromine redox electrode is conducted initially through DFT calculations, establishing the posterior desorption during oxidation as the rate-determining step. An urchin-like titanium nitride hollow sphere (TNHS) composite is designed and synthesized as the catalyst for bromine redox. The large difference in Br- and Br3 - adsorption capability of TNHS promotes rapid desorption of generated Br3 - during the oxidation process, liberating active sites timely to enable smooth ongoing reactions. Besides, the urchin-like microporous/mesoporous structure of TNHS provides abundant active surface for bromine redox reactions, and ample cavities for the bromine accommodation. The inherently high conductivity of TNHS enables facile electron transfer through multiple channels. Consequently, zinc-bromide flow batteries with TNHS catalyst exhibit significantly enhanced kinetics, stably operating at 80 mA cm-2 with 82.78% energy efficiency. Overall, this study offers a solving strategy and catalyst design approach to the sluggish kinetics that has plagued bromine-based flow batteries.

Field Emission from Carbon Nanotubes on Titanium Nitride-Coated Planar and 3D-Printed Substrates

Carbon nanotubes (CNTs) are well known for their outstanding field emission (FE) performance, facilitated by their unique combination of electrical, mechanical, and thermal properties. However, if the substrate of choice is a poor conductor, the electron supply towards the CNTs can be limited, restricting the FE current. Furthermore, ineffective heat dissipation can lead to emitter-substrate bond degradation, shortening the field emitters' lifetime. Herein, temperature-stable titanium nitride (TiN) was deposited by plasma-enhanced atomic layer deposition (PEALD) on different substrate types prior to the CNT growth. A turn-on field reduction of up to 59% was found for the emitters that were generated on TiN-coated bulk substrates instead of on pristine ones. This observation was attributed exclusively to the TiN layer as no significant change in the emitter morphology could be identified. The fabrication route and, consequently, improved FE properties were transferred from bulk substrates to free-standing, electrically insulating nanomembranes. Moreover, 3D-printed, polymeric microstructures were overcoated by atomic layer deposition (ALD) employing its high conformality. The results of our approach by combining ALD with CNT growth could assist the future fabrication of highly efficient field emitters on 3D scaffold structures regardless of the substrate material.

Oxygen Defects Containing TiN Films for the Hydrogen Evolution Reaction: A Robust Thin-Film Electrocatalyst with Outstanding Performance

Density functional theory (DFT) calculations of hydrogen adsorption on titanium nitride had previously shown that hydrogen may adsorb on both titanium and nitrogen sites with a moderate adsorption energy. Further, the diffusion barrier was also found to be low. These findings may qualify TiN, a versatile multifunctional material with electronic conductivity, as an electrode material for the hydrogen evolution reaction (HER). This was the main impetus of this study, which aims to experimentally and theoretically investigate the electrocatalytic properties of TiN layers that were processed on a Ti substrate using reactive ion sputtering. The properties are discussed, focusing on the role of oxygen defects introduced during the sputtering process on the HER. Based on DFT calculations, it is shown that these oxygen defects alter the electronic environment of the Ti atoms, which entails a low hydrogen adsorption energy in the range of -0.1 eV; this leads to HER performances that match those of Pt-NPs in acidic media. When a few nanometer-thick layers of Pd-NPs are sputtered on top of the TiN layer, the performance is drastically reduced. This is interpreted in terms of oxygen defects being scavenged by the Pd-NPs near the surface, which is thought to reduce the hydrogen adsorption sites.

2D Ultrathin Titanium Nitride Nanosheets as Separator Coatings for Li-S Batteries

Transition metal nitrides (TMNs) are affirmed to be an appealing candidate for boosting the performance of lithium-sulfur (Li-S) batteries due to their excellent conductivity, strong interaction with sulfur species, and the effective catalytic ability for conversion of polysulfides. However, the traditional bulk TMNs are difficult to achieve large active surface area and fast transport channels for electrons/ions simultaneously. Here, a 2D ultrathin geometry of titanium nitride (TiN) is realized by a facile topochemical conversion strategy, which can not only serve as an interconnected conductive platform but also expose abundant catalytic active sites. The ultrathin TiN nanosheets are coated on a commercial separator, serving as a multifunctional interlayer in Li-S batteries for hindering the polysulfide shuttle effect by strong capture and fast conversion of polysulfides, achieving a high initial capacity of 1357 mAh g-1 at 0.1 C and demonstrating a low capacity decay of only 0.046% per cycle over 1000 cycles at 1 C.

Highly Flexible and Acid-Alkali Resistant TiN Nanomesh Transparent Electrodes for Next-Generation Optoelectronic Devices

Transparent electrodes are vital for optoelectronic devices, but their development has been constrained by the limitations of existing materials such as indium tin oxide (ITO) and newer alternatives. All face issues of robustness, flexibility, conductivity, and stability in harsh environments. Addressing this challenge, we developed a flexible, low-cost titanium nitride (TiN) nanomesh transparent electrode showcasing exceptional acid-alkali resistance. The TiN nanomesh electrode, created by depositing a TiN coating on a naturally cracked gel film substrate via a sputtering method, maintains a stable electrical performance through thousands of bending cycles. It exhibits outstanding chemical stability, resisting strong acid and alkali corrosion, which is a key hurdle for current electrodes when in contact with acidic/alkaline materials and solvents during device fabrication. This, coupled with superior light transmission and conductivity (88% at 550 nm with a sheet resistance of ∼200 Ω/sq), challenges the reliance on conventional materials. Our TiN nanomesh electrode, successfully applied in electric heaters and electrically controlled thermochromic devices, offers broad potential beyond harsh environment applications. It enables alternative possibilities for the design and fabrication of future optoelectronics for advancements in this pivotal field.

Plasmonic Titanium Nitride Nanohole Arrays for Refractometric Sensing

Group IVB metal nitrides have attracted great interest as alternative plasmonic materials. Among them, titanium nitride (TiN) stands out due to the ease of deposition and relative abundance of Ti compared to those of Zr and Hf metals. Even though they do not have Au or Ag-like plasmonic characteristics, they offer many advantages, from high mechanical stability to refractory behavior and complementary metal oxide semiconductor-compatible fabrication to tunable electrical/optical properties. In this study, we utilized reactive RF magnetron sputtering to deposit plasmonic TiN thin films. The flow rate and ratio of Ar/N2 and oxygen scavenging methods were optimized to improve the plasmonic performance of TiN thin films. The stoichiometry and structure of the TiN thin films were thoroughly investigated to assess the viability of the optimized operation procedures. To assess the plasmonic performance of TiN thin films, periodic nanohole arrays were perforated on TiN thin films by using electron beam lithography and reactive ion etching methods. The resulting TiN periodic nanohole array with varying periods was investigated by using a custom microspectroscopy setup for both reflection and transmission characteristics in various media to underline the efficacy of TiN for refractometric sensing.

Two-Dimensional Atomically Thin Titanium Nitride via Topochemical Conversion

Titanium nitride as a typical transition metal nitride (TMN) has attracted increasing interest for its fascinating characteristics and widespread applications. However, the synthesis of two-dimensional (2D) atomically thin titanium nitride is still challenging which hinders its further research in electronic and optoelectronic fields. Here, 2D titanium nitride with a large area was prepared via in situ topochemical conversion of the titanate monolayer. The titanium nitride reveals a thickness-dependent metallic-to-semiconducting transition, where the atomically thin titanium nitride with a thickness of ∼1 nm exhibits an n-type semiconducting behavior and a highly sensitive photoresponse and displays photoswitchable resistance by repeated light irradiation. First-principles calculations confirm that the chemisorbed oxygen on the surface of the titanium nitride nanosheet depletes its electrons, while the light irradiation induced desorption of oxygen leads to increased electron doping and hence the conductance of titanium nitride. These results may allow the scalable synthesis of ultrathin TMNs and facilitate their fundamental physics research and next-generation optoelectronic applications.

Optimizations of Double Titanium Nitride Thermo-Optic Phase-Shifter Heaters Using SOI Technology

A commercial thermo-optic phase shifter (TOPS) is an efficient solution to the imbalance problem in the fabrication process of Mach-Zehnder modulator (MZM) arms. The TOPS consumes electrical power and transforms it into thermal energy, which changes the real part of the effective refractive index at the waveguide and adjusts the MZM transfer function to work in the linear region. The common model being used today is constructed with only one heater; however, this solution requires more electrical power, which can increase the transmitter system cost. To reduce the system energy cost, we propose a pioneering optimal double titanium nitride heater model under forward biasing at 1550 nm wavelength using the standard silicon-on-insulator technology. Numerical investigations were carried out on the key relative geometrical parameters, heat distribution at the silicon layer, thermal crosstalk, and laser wavelength drift. Results show that the optimal TOPS design can function with a low electrical power of 19.1 mW to achieve a π-phase shift, with a low thermal crosstalk of 0.404 and very low optical losses over 1 mm length. Thus, the proposed device can be used for improving the imbalance problem in MZMs with low electrical power consumption and low losses. This functionality can be utilized to obtain better performances in transmitter systems for data centers and long-range optical communication system applications.

Plasmonic titanium nitride nanomaterials prepared by physical vapor deposition methods

Titanium nitride (TiN) has recently emerged as an alternative to coinage metals to enable the development of integrated plasmonic devices at visible and medium-infrared wavelengths. In this regard, its optical performance can be conveniently tuned by tailoring the process parameters of physical vapor deposition methods, such as magnetron sputtering and pulsed laser deposition (PLD). This review first introduces the fundamental features of TiN and a description on its optical properties, including insights on the main experimental techniques to measure them. Afterwards, magnetron sputtering and PLD are selected as fabrication techniques for TiN nanomaterials. The fundamental mechanistic aspects of both techniques are discussed in parallel with selected case studies from the recent literature, which elucidate the critical advantages of such techniques to engineer the nanostructure and the plasmonic performance of TiN.

The clinical use of computer aided designed/computer aided manufactured titanium nitride coated implant abutments: Surgical and prosthetic considerations-A case series

OBJECTIVE

To describe the clinical use of nitride-coated titanium CAD/CAM implant abutments in the maxillary esthetic zone in two patients with high esthetic and functional demands and, to highlight the advantages of nitride-coated milled titanium abutments when compared to stock/custom titanium, one-piece monolithic zirconia, and hybrid metal-zirconia implant abutments.

CLINICAL CONSIDERATIONS

Due to the inherent mechanical and esthetic clinical challenges, single implant-supported reconstructions in the maxillary esthetic zone are a complex restorative treatment. While CAD/CAM technology has been suggested to enhance and ease implant abutment design and manufacturing, implant abutment material selection remains as a critical decision affecting restoration's long-term clinical outcomes. To date, considering the esthetic disadvantages of conventional titanium implant abutments, the mechanical limitations of one-piece zirconia abutments and the manufacturing time and costs associated with hybrid metal-zirconia abutments, no abutment material can be considered "ideal" for all clinical scenarios. Due to their biocompatibility, biomechanical characteristics (hardness and wear resistance), optical properties (yellow color), and peri-implant soft tissue esthetic integration, the use of CAD/CAM titanium nitride-coated implant abutments has been suggested as a predictable implant abutment material in mechanically challenging but esthetically demanding clinical situations, as the maxillary esthetic zone.

CONCLUSIONS

Two patients requiring a combined tooth-implant restorative treatment in the maxillary esthetic zone were treated using CAD/CAM nitride coated titanium implant abutments. The principal advantages of TiN coated abutments include comparable clinical outcomes to stock abutments, optimal biocompatibility, adequate fracture, wear, and corrosion resistance, reduced bacterial adhesion, and excellent esthetic integration with adjacent soft tissues.

CLINICAL SIGNIFICANCE

Clinical reports and short term mechanical, biological and esthetic clinical outcomes indicate that CAD/CAM nitride coated titanium implant abutments can represent a predictable restorative alternative to stock/custom and metal/zirconia implant abutments and be considered a clinical relevant option in mechanically challenging but esthetically demanding situations, as often found in the maxillary esthetic zone.

Thermoplasmonic In Situ Fabrication of Nanohybrid Electrocatalysts over Gas Diffusion Electrodes for Enhanced H2O2 Electrosynthesis

Large-scale development of electrochemical cells is currently hindered by the lack of Earth-abundant electrocatalysts with high catalytic activity, product selectivity, and interfacial mass transfer. Herein, we developed an electrocatalyst fabrication approach which responds to these requirements by irradiating plasmonic titanium nitride (TiN) nanocubes self-assembled on a carbon gas diffusion layer in the presence of polymeric binders. The localized heating produced upon illumination creates unique conditions for the formation of TiN/F-doped carbon hybrids that show up to nearly 20 times the activity of the pristine electrodes. In alkaline conditions, they exhibit enhanced stability, a maximum H2O2 selectivity of 90%, and achieve a H2O2 productivity of 207 mmol gTiN-1 h-1 at 0.2 V vs RHE. A detailed electrochemical investigation with different electrode arrangements demonstrated the key role of nanocomposite formation to achieve high currents. In particular, an increased TiOxNy surface content promoted a higher H2O2 selectivity, and fluorinated nanocarbons imparted good stability to the electrodes due to their superhydrophobic properties.

Tailoring the Thickness-Dependent Optical Properties of Conducting Nitrides and Oxides for Epsilon-Near-Zero-Enhanced Photonic Applications

The unique properties of the emerging photonic materials, conducting nitrides and oxides, especially their tailorability, large damage thresholds, and, importantly, the so-called epsilon-near-zero (ENZ) behavior, have enabled novel photonic phenomena spanning optical circuitry, tunable metasurfaces, and nonlinear optical devices. This work explores direct control of the optical properties of polycrystalline titanium nitride (TiN) and aluminum-doped zinc oxide (AZO) by tailoring the film thickness, and their potential for ENZ-enhanced photonic applications. This study demonstrates that TiN-AZO bilayers support Ferrell-Berreman modes using the thickness-dependent ENZ resonances in the AZO films operating in the telecom wavelengths spanning from 1470 to 1750 nm. The bilayer stacks also act as strong light absorbers in the ultraviolet regime using the radiative ENZ modes and the Fabry-Perot modes in the constituent TiN films. The studied Berreman resonators exhibit optically induced reflectance modulation of 15% with picosecond response time. Together with the optical response tailorability of conducting oxides and nitrides, using the field enhancement near the tunable ENZ regime can enable a wide range of nonlinear optical phenomena, including all-optical switching, time refraction, and high-harmonic generation.

Titanium Nitride Modified Fiber Optic Interferometer for Refractive Index Sensitivity Enhancement

As one of the most well-established biocompatible transition metal nitrides, titanium nitride (TiN) has been widely applied for fiber waveguide coupling device applications. This study proposes a TiN-modified fiber optic interferometer. Benefiting from the unique properties of TiN, including ultrathin nanolayer, high refractive index, and broad-spectrum optical absorption, the refractive index (RI) response of the interferometer is greatly enhanced, which is desired all the time in the field of biosensing. The experimental results show that the deposited TiN nanoparticles (NPs) can enhance the evanescent field excitation and modulate the effective RI difference of the interferometer, which eventually results in the RI response enhancement. Besides, after incorporating the TiN with different concentrations, the resonant wavelength and the RI responses of the interferometer are enhanced to varying degrees. Benefitting from this advantage, the sensing performances, including sensitivity and measurement range, can be flexibly adapted based on different detection requirements. Since RI response can effectively reflect the detection ability of biosensors, the proposed TiN-sensitized fiber optic interferometer can be potentially applied for high-sensitive biosensing applications.

Fabrication and Optimization of Nafion as a Protective Membrane for TiN-Based pH Sensors

In this study, a solid-state modified pH sensor with RF magnetron sputtering technology was developed. The sensor consists of an active electrode consisting of a titanium nitride (TiN) film with a protective membrane of Nafion and a reference glass electrode of Ag/AgCl. The sensitivity of the pH sensor was investigated. Results show a sensor with excellent characteristics: sensitivity of 58.6 mV/pH for pH values from 2 to 12, very short response time of approximately 12 s in neutral pH solutions, and stability of less than 0.9 mV in 10 min duration. Further improvement in the performance of the TiN sensor was studied by application of a Nafion protective membrane. Nafion improves the sensor sensitivity close to Nernstian by maintaining a linear response. This paves the way to implement TiN with Nafion protection to block any interference species during real time applications in biosensing and medical diagnostic pH sensors.

Robust Porous TiN Layer for Improved Oxygen Evolution Reaction Performance

The poor reversibility and slow reaction kinetics of catalytic materials seriously hinder the industrialization process of proton exchange membrane (PEM) water electrolysis. It is necessary to develop high-performance and low-cost electrocatalysts to reduce the loss of reaction kinetics. In this study, a novel catalyst support featured with porous surface structure and good electronic conductivity was successfully prepared by surface modification via a thermal nitriding method under ammonia atmosphere. The morphology and composition characterization-confirmed that a TiN layer with granular porous structure and internal pore-like defects was established on the Ti sheet. Meanwhile, the conductivity measurements showed that the in-plane electronic conductivity of the as-developed material increased significantly to 120.8 S cm−1. After IrOx was loaded on the prepared TiN-Ti support, better dispersion of the active phase IrOx, lower ohmic resistance, and faster charge transfer resistance were verified, and accordingly, more accessible catalytic active sites on the catalytic interface were developed as revealed by the electrochemical characterizations. Compared with the IrOx/Ti, the as-obtained IrOx/TiN-Ti catalyst demonstrated remarkable electrocatalytic activity (η10 mA cm−2 = 302 mV) and superior stability (overpotential degradation rate: 0.067 mV h−1) probably due to the enhanced mass adsorption and transport, good dispersion of the supported active phase IrOx, increased electronic conductivity and improved corrosion resistance provided by the TiN-Ti support.

Feasibility Analysis of Machining Cobalt-Chromium Alloy (Stellite-6) Using TiN Coated Binary Inserts

The objective of the study was to check the feasibility of machining Stellite 6, a cobalt-chromium superalloy, using TiN-coated carbide inserts in an end milling operation. The inserts were coated using the magnetron sputtering process. The sputtering power and gas flow rate were considered as the variables during the coating process. The performance of the coated binary carbide insert was checked during the end milling of Stellite 6 (~45 HRC) through an experiment with a Taguchi design. Experimental runs based on an orthogonal array were executed for each insert type to check the feasibility of machining this cobalt-based alloy. Adequate precision and the optimum parametric conditions were determined and are reported in this study. Analysis of variance (ANOVA) with a two-factor interaction model was also undertaken to forecast the key elements influencing surface roughness. Based on the ANOVA model, the depth of the cut, combined with the insert type, was the factor that had the greatest influence on surface roughness, followed by the cutting feed, whereas the cutting velocity had the least significance based on the tests. Moreover, the regression analysis demonstrated that the created model can be used to accurately forecast surface roughness in end milling of Stellite 6 with confidence intervals of 95%.

Structure, Oxygen Content and Electric Properties of Titanium Nitride Electrodes in TiNx/La:HfO2/TiNx Stacks Grown by PEALD on SiO2/Si

This work reports experimental results of the quantitative determination of oxygen and band gap measurement in the TiN_x electrodes in planar TiN_x top/La:HfO₂/TiN_x bottom MIM stacks obtained by plasma enhanced atomic layer deposition on SiO₂. Methodological aspects of extracting structural and chemical information from (scanning) transmission electron microscopy imaging (bright field and high angular annular dark field), energy dispersive X-ray spectrometry and electron energy loss spectroscopy are thoroughly considered. The study shows that the oxygen concentration is higher in the TiN_xO_y bottom electrode (about 14.2 ± 0.1 at. %) compared to the TiN_xO_y top electrode (about 11.4 ± 0.5 at. %). The following average stoichiometric formulas are TiN₀.₅₂O₀.₂₀ top and TiN₀.₅₄O₀.₂₆ bottom for top and bottom electrodes, respectively. The amount of oxygen incorporated into TiN_x during PEALD because of oxygen impurities in the plasma is minor compared to that because of diffusion from SiO₂ and HfO₂. This asymmetry, together with results on a sample grown on a Si substrate, shows that incorporating oxygen impurity from the plasma itself is a minor part compared to diffusion from the SiO₂ substrate and HfO₂ dielectric during the PEALD growth. We observe the presence of TiO₂ at the interface between the Hf oxide layer and the Ti nitride electrodes as well as at the SiO₂ interface. EELS analysis led to a band gap ranging from 2.2 to 2.5 eV for the bottom TiN_xO_y and 1.7-2.2 eV for the top TiN_xO_y, which is in fair agreement with results obtained on the top TiN_x electrode (1.6 ± 01 eV) using optical absorption spectra. Measurement of sheet resistance, resistivity and temperature coefficient of resistance by a four-point probe on the top TiN_xO_y electrode from 20 to 100 °C corresponds to the typical values for semiconductors.

The Significant Effect of Mechanical Treatment on Ceramic Coating for Biomedical Application

Titanium and its alloys are commonly preferred materials used for biomedical implants. However, these alloys have issues related to corrosion resistance as a result of the aggressive attack of human body fluids. Several researchers have attempted to produce a ceramic coating via physical vapour deposition (PVD). A PVD layer consists of pores, pinholes, and columnar growth that attack the substrate as an aggressive medium. The aim of this research is to evaluate the influence of ultrasonic vibration parameters on a TiN-coated biomedical Ti-13Zr-13Nb alloy. This study used TiN to formulate and coat disk-type samples in a fixed condition. Ultrasonic vibration at fixed frequencies was applied to TiN-coated samples for three sets of exposure times. The findings revealed that all TiN-coated samples exposed to ultrasonic vibration had improved corrosion resistance compared to untreated samples. Field emission scanning electron microscopy (FESEM) was employed to analyse sample's microstructures. The top parameter (16 kHz and 11 min) yielded the most compact coating. Ultrasonic vibration's hammering effect decreased the size of microchannels in the lining and reduced the rate of corrosion attack. The nanoindentation test showed that coated ultrasonic treated samples had a higher hardness/elasticity (H/E) ratio than untreated samples.

Robust Laminated Anode with an Ultrathin Titanium Nitride Layer for High-Efficiency Top-Emitting Organic Light-Emitting Diodes

The effective reflective anode remains a highly desirable component for the fabrication of reliable top-emitting organic light-emitting diodes (TE-OLEDs) which have the potential to be integrated with complementary metal-oxide-semiconductor (CMOS) circuits for microdisplays. This work demonstrates a novel laminated anode consisting of a Cr/Al/Cr multilayer stack. Furthermore, we implement an ultra-thin titanium nitride (TiN) layer as a protective layer on the top of the Cr/Al/Cr composite anode, which creates a considerably reflective surface in the visible range, and meanwhile improves the chemical stability of the electrode against the atmosphere or alkali environment. Based on [2-(2-pyridinyl-N)phenyl-C](acetylacetonate)iridium(III) as green emitter and Mg/Ag as transparent cathode, our TE-OLED using the TiN-coated anode achieves the maximum current efficiency of 71.2 cd/A and the maximum power efficiency of 66.7 lm/W, which are 81% and 90% higher than those of the reference device without TiN, respectively. The good device performance shows that the Cr/Al/Cr/TiN could function as a promising reflective anode for the high-resolution microdisplays on CMOS circuits.

Frictional wear of stud implant overdenture abutments after 2 years of in vitro simulated function

Progressive wear of the components of an implant-supported overdenture can lead to loss of denture retention, which affects masticatory function and the patient's quality of life. The primary objective of this in vitro study was to investigate frictional wear in a type of commonly used abutment and thereby estimate the general clinical lifespan of a typical stud abutment and establish a protocol for replacement. Therefore, simulated overdenture insertions and removals equivalent to 2 years of overdenture use were performed to evaluate surface changes in the metal stud abutment component. A digital caliper, scanning electron micrographs taken at ×500 magnification, and profilometer data were used to determine the wear rate and surface roughness. A universal testing machine was used to measure retention load force with 4 clear male nylon inserts (5.0-lb retention) during 2160 insertion and removal cycles. The results showed that with a 6-month replacement program for clear male nylon inserts, the frictional wear on the titanium nitride coating of abutments placed at a 0° position resulted in a decrease of up to 50% in removal forces of the inserts after a simulated 2 years of wear. The combination of wear of the titanium nitride coating and the decrease in retention load values suggests that stud abutments should be replaced after 2 years of use for optimal retention.

Titanium Oxynitride Spheres with Broad Plasmon Resonance for Solar Seawater Desalination

The facile production of hollow and solid nitridized submicrometer titania spheres has been successfully realized, with potential for mass production. The nitridation process gives submicrometer titanium oxynitride spheres, which possess a strong and broadband light absorption property. Interband-transition-induced resonance and plasmon resonance have been found to coexist in titanium oxynitride spheres through single-particle dark-field scattering measurements. Theoretical modeling has further confirmed that the excellent light absorption properties of the oxynitride spheres originate from the supported dual-mode optical resonance. A highly efficient, easy-to-build, and self-sustainable device is rationally designed for solar-driven seawater desalination, where the titanium oxynitride spheres function as photothermal transducers. The hollow spheres possess a higher water evaporation rate than the solid ones as the inner surface of the hollow spheres also provides surface sites for interaction with water molecules. Given the outstanding light absorption capability and the unique morphology of the hollow spheres, a water evaporation rate of ∼1.49 kg m^-2 h^-1 with a solar-to-thermal conversion efficiency of ∼89.1% has been achieved under the illumination of simulated solar light (1 sun, 1 kW m^-2). This marks the record performance among reported plasmon-based solar seawater desalination systems.

Ultrathin TiN Epitaxial Films as Transparent Conductive Electrodes

Titanium nitride (TiN), a transition-metal compound with tight covalent Ti-N bonding, has a high melting temperature and superior mechanical and chemical stabilities compared to noble metals. With a reduction in thickness, the optical transmittance of TiN films can be drastically increased, and in combination with its excellent electrical conductivity, the ultrathin and continuous TiN film can be considered as an ideal alternative of the metal oxide electrodes. However, the deposition of ultrathin and continuous metallic layer with a smooth surface morphology is a major challenge for typical deposition methods such as thermal evaporation or reactive sputtering. In particular, defects mainly related with oxygen contents and surface scattering can significantly limit the performance of ultrathin TiN films. In this work, ultrathin TiN films with 2-10 nm in thickness are grown by using the nitrogen plasma-assisted molecular-beam epitaxy (MBE) method in an ultrahigh vacuum environment. Excellent surface morphology with a root-mean-square roughness of ≤0.12 nm and a high optical transparency of 75% over the whole visible regime are achieved for ultrathin TiN epitaxial films. The dielectric properties determined by the spectroscopic ellipsometry and the electrical properties measured by the terahertz spectroscopy and the Hall effect method reveal that the percolation thickness of the TiN epitaxial film is less than 2.4 nm and its electrical conductivity is higher than 1.1 × 10⁴ Ω^-1 cm^-1. These features make MBE-grown ultrathin TiN epitaxial films a good candidate for robust, low cost, and large-area transparent conductive electrodes.

Electromagnetic Field Enhancement of Nanostructured TiN Electrodes Probed with Surface-Enhanced Raman Spectroscopy

We present a facile approach for the determination of the electromagnetic field enhancement of nanostructured TiN electrodes. As model system, TiN with partially collapsed nanotube structure obtained from nitridation of TiO₂ nanotube arrays was used. Using surface-enhanced Raman scattering (SERS) spectroscopy, the electromagnetic field enhancement factors (EFs) of the substrate across the optical region were determined. The non-surface binding SERS reporter group azidobenzene was chosen, for which contributions from the chemical enhancement effect can be minimized. Derived EFs correlated with the electronic absorption profile and reached 3.9 at 786 nm excitation. Near-field enhancement and far-field absorption simulated with rigorous coupled wave analysis showed good agreement with the experimental observations. The major optical activity of TiN was concluded to originate from collective localized plasmonic modes at ca. 700 nm arising from the specific nanostructure.

The Applications of Ultra-Thin Nanofilm for Aerospace Advanced Manufacturing Technology

With the development of industrial civilization, advanced manufacturing technology has attracted widespread concern, including in the aerospace industry. In this paper, we report the applications of ultra-thin atomic layer deposition nanofilm in the advanced aerospace manufacturing industry, including aluminum anti-oxidation and secondary electron suppression, which are critical in high-power and miniaturization development. The compact and uniform aluminum oxide film, which is formed by thermal atomic layer deposition (ALD), can prevent the deep surface oxidation of aluminum during storage, avoiding the waste of material and energy in repetitive production. The total secondary electron yield of the C/TiN component nanofilm, deposited through plasma-enhanced atomic layer deposition, decreases 25% compared with an uncoated surface. The suppression of secondary electron emission is of great importance in solving the multipactor for high-power microwave components in space. Moreover, the controllable, ultra-thin uniform composite nanofilm can be deposited directly on the complex surface of devices without any transfer process, which is critical for many different applications. The ALD nanofilm shows potential for promoting system performance and resource consumption in the advanced aerospace manufacturing industry.

Wear Resistance of Ti-6Al-4V Alloy Ball Heads for Use in Implants

The effect of thermohydrogen treatment and vacuum ion–plasma nitriding on the determination of the volume and surface structure of ball heads made of Ti–6Al–4V alloy was studied. It was found that the submicrocrystalline structure formed in the head during thermohydrogen treatment makes it possible to achieve hardness values of 39–41 units HRC and a surface roughness of 0.02 μm. It was shown that the creation of a modified layer consisting of ε (TiN) and δ (Ti₂N) titanium nitrides on the surface of a ball head and the solid interstitial solution of nitrogen in α-titanium makes it possible to completely eliminate material wear when testing for friction on ultra-high-molecular-weight polyethylene. The equivalent analysis was also conducted with a ball head that had been implanted in a human body for 12 years. It was found that the change in the color of the head, from slightly golden after nitriding to metallic, is due to the formation of an oxynitride nanoscale layer on the surface. It was shown that in contrast with films made of titanium oxide, the film developed in this study has high wear resistance.

Titanium Nitride as a Plasmonic Material from Near-Ultraviolet to Very-Long-Wavelength Infrared Range

Titanium nitride is a well-known conductive ceramic material that has recently experienced resumed attention because of its plasmonic properties comparable to metallic gold and silver. Thus, TiN is an attractive alternative for modern and future photonic applications that require compatibility with the Complementary Metal-Oxide-Semiconductor (CMOS) technology or improved resistance to temperatures or radiation. This work demonstrates that polycrystalline TiN_x films sputtered on silicon at room temperature can exhibit plasmonic properties continuously from 400 nm up to 30 μm. The films’ composition, expressed as nitrogen to titanium ratio x and determined in the Secondary Ion Mass Spectroscopy (SIMS) experiment to be in the range of 0.84 to 1.21, is essential for optimizing the plasmonic properties. In the visible range, the dielectric function renders the interband optical transitions. For wavelengths longer than 800 nm, the optical properties of TiN_x are well described by the Drude model modified by an additional Lorentz term, which has to be included for part of the samples. The ab initio calculations support the experimental results both in the visible and infra-red ranges; particularly, the existence of a very low energy optical transition is predicted. Some other minor features in the dielectric function observed for the longest wavelengths are suspected to be of phonon origin.

Improving the Properties of Composite Titanium Nitride Layers on the AZ91D Magnesium Alloy Using Hydrothermal Treatment

Coating magnesium alloys with nitride surface layers is a prospective way of improving their intrinsically poor surface properties; in particular, their tribological and corrosion resistance. These layers are usually produced using PVD methods using magnetron sputtering or arc evaporation. Even though the thus-produced layers significantly increase the wear resistance of the alloys, their effects on corrosion resistance are unsatisfactory because of the poor tightness, characteristic of PVD-produced products. Tightness acquires crucial significance when the substrate is a highly-active magnesium alloy, hence our idea to tighten the layers by subjecting them to a post-deposition chemical-hydrothermal-type treatment. This paper presents the results of our experiments with a new hybrid surface engineering method, using a final tightening pressure hydrothermal gas treatment in overheated steam of the composite titanium nitride layers PVD, produced on AZ91D magnesium alloy. The proposed method resulted in an outstanding improvement of the performance properties, in particular resistance to corrosion and wear, yielding values that exceed those exhibited by commercially anodized alloys and austenitic stainless 316L steel. The developed hybrid method produces new, high-performance corrosion and wear resistant, lightweight magnesium base materials, suitable for heavy duty applications.

Investigation of Mechanical Properties and Salt Spray Corrosion Test Parameters Optimization for AA8079 with Reinforcement of TiN + ZrO2

This work mainly focuses on increasing the mechanical strength and improving the corrosion resistance of an aluminum alloy hybrid matrix. The composites are prepared by the stir casting procedure. For this work, aluminum alloy 8079 is considered as a base material and titanium nitride and zirconium dioxide are utilized as reinforcement particles. Mechanical tests, such as the ultimate tensile strength, wear, salt spray corrosion test and microhardness test, are conducted effectively in the fabricated AA8079/TiN + ZrO₂ composites. L9 OA statistical analysis is executed to optimize the process parameters of the mechanical and corrosion tests. ANOVA analysis defines the contribution and influence of each parameter. In the tensile and wear test, parameters are chosen as % of reinforcement (3%, 6% and 9%), stirring speed (500, 550 and 600 rpm) and stirring time (20, 25 and 30 min). Similarly, in the salt spray test and microhardness test, the selected parameters are: percentage of reinforcement (3%, 6% and 9%), pH value (3, 6 and 9), and hang time (24, 48 and 72 h). The percentage of reinforcement highly influenced the wear and microhardness test, while the stirring time parameter extremely influenced the ultimate tensile strength. From the corrosion test, the hang time influences the corrosion rate. The SEM analysis highly reveals the bonding of each reinforcement particle to the base material.

Preparation of Metal Nitride Particles Using Arc Discharge in Liquid Nitrogen

A simple process to synthesize metal nitride particles was proposed using submerged arc discharge plasma in liquid nitrogen. Gibbs standard free energy was considered for the selection of the nitride-forming materials. In this study, titanium (Ti) and aluminum (Al) electrodes were used as raw materials for nitride particle preparation. Liquid nitrogen acted as a dielectric medium as well as a nitridation source in this process. A copper electrode was also used as a non-reactive material for comparison with the reactive Ti and Al electrodes. As the operating conditions of the experiments, the arc discharge current was varied from 5 A (low-power mode) to 30 A (high-power mode). The formation of titanium nitride (TiN) and aluminum nitride (AlN) was confirmed in the particles prepared in all experimental conditions by X-ray powder diffraction (XRD). The observation using a field emission scanning electron microscope (FE-SEM) and a field emission transmission electron microscope (FE-TEM) indicated that the synthesized TiN particles showed a cubic morphology, whereas AlN particles containing unreacted Al showed a spherical morphology. The experiments using different metal electrode configurations showed that the anode generated most of the particles in this process. Based on the obtained results, a particle formation mechanism was proposed.

A Titanium Nitride Nanozyme for pH-Responsive and Irradiation-Enhanced Cascade-Catalytic Tumor Therapy

Nanozyme-based catalytic tumor therapy is an emerging therapeutic method with high reactivity in response to tumor microenvironments (TMEs). To overcome the current limitations of deficient catalytic activity of nanozymes, we studied the contributing factors of enzymatic activity based on non-metallic-atom doping and irradiation. Nitrogen doping significantly enhanced the peroxidase activity of Ti-based nanozymes, which was shown experimentally and theoretically. Based on the excellent NIR-adsorption-induced surface plasmon resonance and photothermal effect, the enzymatic activity of TiN nanoparticles (NPs) was further improved under NIR laser irradiation. Hence, an acidic TME-responsive and irradiation-mediated cascade nanocatalyst (TLGp) is presented by using TiN-NP-encapsulated liposomes linked with pH-responsive PEG-modified glucose oxidase (GOx). The integration of pH-responsive GOx-mediated H₂ O₂ self-supply, nitrogen-doping, and irradiation-enhanced enzymatic activity of TiN NPs and mild-photothermal therapy enables an effective tumor inhibition by TLGp with minimal side effects in vivo.

Nanoconfined Topochemical Conversion from MXene to Ultrathin Non-Layered TiN Nanomesh toward Superior Electrocatalysts for Lithium-Sulfur Batteries

2D non-layered materials (2DNLMs) featuring massive undercoordinated surface atoms and obvious lattice distortion have shown great promise in catalytic/electrocatalytic applications, but their controllable synthesis remains challenging. Here, a new type of ultrathin carbon-wrapped titanium nitride nanomesh (TiN NM@C) is prepared using a rationally designed nano-confinement topochemical conversion strategy. The ultrathin 2D geometry with well-distributed pores offers TiN NM@C plentiful exposed active sites and rapid charge transfer, leading to outstanding electrocatalytic performance tackling the sluggish sulfur redox kinetics in lithium-sulfur batteries (LSBs). LSBs employing TiN NM@C electrocatalyst deliver excellent rate capabilities (e.g., 304 mAh g^-1 at 10 C), greatly outperforming that of using TiN nanoparticles embedded in carbon nanosheets (TiN NPs@C) as a benchmark. More impressively, a free-standing electrode for LSBs with a high sulfur loading of 7.3 mg cm^-2 is demonstrated, showing a high peak areal capacity of 5.6 mAh cm^-2 at a high current density of 6.1 mA cm^-2 . This work provides a new avenue for the facile and controllable fabrication of 2DNLMs with impressive electrocatalysis for LSBs as well as other energy conversion and storage technologies.

New Nitride Nanoceramics from Synthesis-Mixed Nanopowders in the Composite System Gallium Nitride GaN-Titanium Nitride TiN

Presented is a study on the preparation, via original precursor solution chemistry, of intimately mixed composite nanocrystalline powders in the system gallium nitride GaN–titanium nitride TiN, atomic ratio Ga/Ti = 1/1, which were subjected to high-pressure (7.7 GPa) and high-temperature (650, 1000, and 1200 °C) sintering with no additives. Potential equilibration toward bimetallic compounds upon mixing of the solutions of the metal dimethylamide precursors, dimeric {Ga[N(CH₃)₂]₃}₂ and monomeric Ti[N(CH₃)₂]₄, was studied with ¹H- and ¹³C{H}-NMR spectroscopy in C₆D₆ solution. The different nitridation temperatures of 800 and 950 °C afforded a pool of in situ synthesis-mixed composite nanopowders of hexagonal h-GaN and cubic c-TiN with varying average crystallite sizes. The applied sintering temperatures were either to prevent temperature-induced recrystallization (650 °C) or promote crystal growth (1000 and 1200 °C) of the initial powders with the high sintering pressure of 7.7 GPa having a detrimental effect on crystal growth. The powders and nanoceramics, both of the composites and of the individual nitrides, were characterized if applicable by powder XRD, SEM/EDX, Raman spectroscopy, Vicker’s hardness, and helium density. No evidence was found for metastable alloying of the two crystallographically different nitrides under the applied synthesis and sintering conditions, while the nitride domain segregation on the micrometer scale was observed on sintering. The Vicker’s hardness tests for many of the composite and individual nanoceramics provided values with high hardness comparable with those of the individual h-GaN and c-TiN ceramics.

Enhanced Spontaneous Emission of Monolayer MoS2 on Epitaxially Grown Titanium Nitride Epsilon-Near-Zero Thin Films

Room-temperature photoluminescence enhancement of molybdenum disulfide (MoS₂) monolayers on epitaxial titanium nitride (TiN) thin films grown by molecular-beam-epitaxy as well as magnetron-sputtered TiN films is observed by a confocal laser scanning microscope with excitation wavelengths covering the transition of TiN's macroscopic optical properties from dielectric to plasmonic. The photoluminescence enhancement increases as TiN becomes more metallic, and strong enhancement is obtained at the excitation wavelengths equal to or longer than the epsilon-near-zero (ENZ) wavelength of TiN films. A good agreement is observed between measured and calculated enhancements. The enhancement is attributed to the increased excitation field in MoS₂ at TiN's ENZ wavelength and interference effects for thick spacers that separate the MoS₂ flakes from TiN films in the metallic regime. This study enriches the fundamental understanding of emission properties on ENZ substrates that could be important for the development of advanced nanoscale lasers/light sources, optical/biosensors, and nano-optoelectronic devices.

Broadband Absorption Based on Thin Refractory Titanium Nitride Patterned Film Metasurface

In this paper, a thin metasurface perfect absorber based on refractory titanium nitride (TiN) is proposed. The size parameter of the metasurface is investigated based on the finite difference time domain method and transfer matrix method. With only a 15-nm-thick TiN layer inside the silica/TiN/silica stacks standing on the TiN substrate, the near-perfect absorption throughout the visible regime is realized. The cross-talk between the upper and lower dielectric layers enables the broadening of the absorption peak. After patterning the thin film into a nanodisk array, the resonances from the nanodisk array emerge to broaden the high absorption bandwidth. As a result, the proposed metasurface achieves perfect absorption in the waveband from 400 to 2000 nm with an average absorption of 95% and polarization-insensitivity under the normal incidence. The proposed metasurface maintains average absorbance of 90% up to 50-degree oblique incidence for unpolarized light. Our work shows promising potential in the application of solar energy harvesting and other applications requiring refractory metasurfaces.

Thermal Stability of TiN Coated Cubic Boron Nitride Powder

Wear-resistant, super hard ceramic composites based on cubic boron nitride (cBN) are of great interest to industry. However, cBN is metastable under sintering conditions at normal pressure and converts into the soft hexagonal BN (hBN). Therefore, efforts are being made to avoid this process. Besides short sintering times, the use of coated cBN-particles is a way to minimize this process. Therefore, the thermal stability of TiN coated cBN powders in high purity argon and nitrogen atmospheres up to temperatures of 1600 °C was investigated by thermogravimetry, X-ray phase analysis, scanning electron microscopy and Raman spectroscopy. The TiN coating was prepared by the atomic layer deposition (ALD)-method. The investigations showed that the TiN layer reacts in Ar at T ≥ 1200 °C with the cBN and forms a porous TiB₂ layer. No reaction takes place in nitrogen up to temperatures of 1600 °C. Nevertheless, the 20 and 50 nm thin coatings also undergo a recrystallization process during heat treatment up to temperatures of 1600 °C.

Effect of Cathodic Arc Plasma Deposition on Shear Bond Strength between Palladium Cobalt Chromium Coated with Titanium Nitride and Titanium Aluminium Nitride with Ceramic

Background:

The success of esthetic ceramo-metal restoration is strongly influenced by its bond strength. The success of ceramo-metal restoration is subjective to its bond strength.

Aim and Objectives:

The aim of this study is to evaluate the shear bond strength between palladium-based cobalt chromium (Co-Cr) alloy coated with titanium nitride (TiNi) and titanium aluminum nitride with feldspathic ceramics.

Materials and Methods:

According to the International Organization for standardization 9693; technical report 1,140,640 samples were prepared using Palladium-based Co-Cr alloy with ×4 vertical projection resting on 5 mm diameter base. The samples were divided into Group: A (control), Group: B (Sandblasted), Group: C (TiNi coated), and Group: D (titanium aluminum nitride coated by cathodic arc plasma deposition, following which feldspathic ceramic application was performed. Shear bond test was performed using universal testing machine and surface analysis was performed using scanning electron microscope.

Results:

The mean shear bond strength for Group A was 172.994 ± 3.739 N, Group B 209.485 ± 5.913 N, Group C 176.536 ± 4.780 N, and Group D 260.576 ± 16.351 N. Comparison within the groups was made using one-way ANOVA, and multiple group comparisons were made using Tukey's honestly significant difference Post hoc test where the P < 0.001was considered statistically significant.

Conclusion:

Palladium based Co-Cr alloy coated with titanium aluminum nitride by cathodic plasma arc deposition showed maximum shear bond strength with feldspathic ceramic compared to noncoated, sandblasted, and TiNi coated alloy.

Titanium Nitride as a New Prospective Material for NanoSQUIDs and Superconducting Nanobridge Electronics

Nanobridge Josephson junctions and nanometer-scale superconducting quantum interference devices (nanoSQUIDs) based on titanium nitride (TiN) thin films are described. The TiN films have a room temperature resistivity of ~15 µΩ·cm, a superconducting transition temperature T_c of up to 5.3 K and a coherence length ξ(4.2 K) of ~105 nm. They were deposited using pulsed DC magnetron sputtering from a stoichiometric TiN target onto Si (100) substrates that were heated to 800 °C. Electron beam lithography and highly selective reactive ion etching were used to fabricate nanoSQUIDs with 20-nm-wide nanobridge Josephson junctions of variable thickness. X-ray and high-resolution electron microscopy studies were performed. Non-hysteretic I(V) characteristics of the nanobridges and nanoSQUIDs, as well as peak-to-peak modulations of up to 17 µV in the V(B) characteristics of the nanoSQUIDs, were measured at 4.2 K. The technology offers prospects for superconducting electronics based on nanobridge Josephson junctions operating within the framework of the Ginzburg–Landau theory at 4.2 K.

Enhanced CO2 Photocatalysis by Indium Oxide Hydroxide Supported on TiN@TiO2 Nanotubes

Herein is developed a ternary heterostructured catalyst, based on a periodic array of 1D TiN nanotubes, with a TiO₂ nanoparticulate intermediate layer and a In₂O_3-x(OH)_y nanoparticulate shell for improved performance in the photocatalytic reverse water gas shift reaction. It is demonstrated that the ordering of the three components in the heterostructure sensitively determine its activity in CO₂ photocatalysis. Specifically, TiN nanotubes not only provide a photothermal driving force for the photocatalytic reaction, owing to their strong optical absorption properties, but they also serve as a crucial scaffold for minimizing the required quantity of In₂O_3-x(OH)_y nanoparticles, leading to an enhanced CO production rate. Simultaneously, the TiO₂ nanoparticle layer supplies photogenerated electrons and holes that are transferred to active sites on In₂O_3-x(OH)_y nanoparticles and participate in the reactions occurring at the catalyst surface.

Titanium Nitride Nanodonuts Synthesized from Natural Ilmenite Ore as a Novel and Efficient Thermoplasmonic Material

Nanostructures of titanium nitride (TiN) have recently been considered as a new class of plasmonic materials that have been utilized in many solar energy applications. This work presents the synthesis of a novel nanostructure of TiN that has a nanodonut shape from natural ilmenite ore using a low-cost and bulk method. The TiN nanodonuts exhibit strong and spectrally broad localized surface plasmon resonance absorption in the visible region centered at 560 nm, which is well suited for thermoplasmonic applications as a nanoscale heat source. The heat generation is investigated by water evaporation experiments under simulated solar light, demonstrating excellent solar light harvesting performance of the nanodonut structure.

Plasmonic Titanium Nitride Facilitates Indium Oxide CO2 Photocatalysis

Nanoscale titanium nitride TiN is a metallic material that can effectively harvest sunlight over a broad spectral range and produce high local temperatures via the photothermal effect. Nanoscale indium oxide-hydroxide, In₂ O_{3- x} (OH)_y , is a semiconducting material capable of photocatalyzing the hydrogenation of gaseous CO₂ ; however, its wide electronic bandgap limits its absorption of photons to the ultraviolet region of the solar spectrum. Herein, the benefits of both nanomaterials in a ternary heterostructure: TiN@TiO₂ @In₂ O_{3- x} (OH)_y are combined. This heterostructured material synergistically couples the metallic TiN and semiconducting In₂ O_{3- x} (OH)_y phases via an interfacial semiconducting TiO₂ layer, allowing it to drive the light-assisted reverse water gas shift reaction at a conversion rate greatly surpassing that of its individual components or any binary combinations thereof.

Effects of Anion Carriers on Capacitance and Self-Discharge Behaviors of Zinc Ion Capacitors

Pseudocapacitive behavior and ion hybrid capacitors can improve the energy density of supercapacitors, but research has only considered the reaction of cations during the electrochemical process, leading to a flawed mechanistic understanding. Here, the effects of various anions carriers on the electrochemical behaviors of titanium nitride-based zinc ion capacitor (Zn-TiN capacitor) were explored. DFT calculations revealed the stable structure of TiN-SO₄ after adsorbed process, enabling SO₄ ^2- participate in the electrochemical process and construct a two-step adsorption and intercalation energy storage mechanism, improving the capacitance and anti-self-discharge ability of the Zn-TiN capacitor, which delivered an ultrahigh capacitance of 489.8 F g^-1 and retained 83.92 % of capacitance even after 500 h resting time. An energy storage system involving anions in the electrochemical process can improve capacitance and anti-self-discharge ability of ion hybrid capacitors.

Metal-Free Oxide-Nitride Heterostructure as a Tunable Hyperbolic Metamaterial Platform

Metal-free plasmonic metamaterials with wide-range tunable optical properties are highly desired for various components in future integrated optical devices. Designing a ceramic-ceramic hybrid metamaterial has been theoretically proposed as a solution to this critical optical material demand. However, the processing of such all-ceramic metamaterials is challenging due to difficulties in integrating two very dissimilar ceramic phases as one hybrid system. In this work, an oxide-nitride hybrid metamaterial combining two highly dissimilar ceramic phases, i.e., semiconducting weak ferromagnetic NiO nanorods and conductive plasmonic TiN matrix, has been successfully integrated as a unique vertically aligned nanocomposite form. Highly anisotropic optical properties such as hyperbolic dispersions and strong magneto-optical coupling have been demonstrated under room temperature. The novel functionalities presented show the strong potentials of this new ceramic-ceramic hybrid thin film platform and its future applications in next-generation nanophotonics and magneto-optical integrated devices without the lossy metallic components.

Surface-Dependent Performance of Ultrathin TiN Films as an Electrically Conducting Li Diffusion Barrier for Li-Ion-Based Devices

An in-depth understanding of lithium (Li) diffusion barriers is a crucial factor for enabling Li-ion-based devices such as three-dimensional (3D) thin-film batteries and synaptic redox transistors integrated on silicon substrates. Diffusion of Li ions into silicon can damage the surrounding components, detach the device itself, lead to battery capacity loss, and cause an uncontrolled change of the transistor channel conductance. In this study, we analyze for the first time ultrathin 10 nm titanium nitride (TiN) films as a bifunctional Li-ion diffusion barrier and current collector. Thermal atomic layer deposition (ALD) and pulsed chemical vapor deposition (pCVD) are employed for manufacturing ultrathin films. The 10 nm ALD films demonstrate excellent blocking capability with an insertion of only 0.03 Li per TiN formula unit exceeding 200 galvanostatic cycles at 3 μA/cm² between 0.05 and 3 V versus Li/Li⁺. An ultralow electrical resistivity of 115 μΩ cm is obtained. In contrast, a partial barrier breakdown is observed for 10 nm pCVD films. High surface quality with low contamination is identified as a key factor for the excellent performance of ALD TiN. Conformal deposition of 10 nm ALD TiN in 3D structures with high aspect ratios of up to 20:1 is demonstrated. The measured capacities of the surface area-enhanced samples are in good agreement with the expected values. High-temperature blocking capability is proven for a typical electrode crystallization step. Ultrathin ALD TiN is an ideal candidate for an electrically conducting Li-ion diffusion barrier for Si-integrated devices.

Marimo-Bead-Supported Core-Shell Nanocomposites of Titanium Nitride and Chromium-Doped Titanium Dioxide as a Highly Efficient Water-Floatable Green Photocatalyst

The release of untreated industrial wastewater creates a hazardous impact on the environment. In this regard, the development of an environmentally friendly catalyst is of paramount importance. Here, we report a highly efficient and reusable core-shell TiN/SiO₂/Cr-TiO₂ (TSCT) photocatalyst that is composed of SiO₂-cladded titanium nitride (TiN) nanoparticles (NPs) decorated with Cr-doped TiO₂ NPs for the removal of organic contaminants from water. The TiN NPs serve as the main light absorber component with excellent visible-light absorption along with Cr-TiO₂ NPs. The TSCT shows remarkable improvement in the photodecomposition of methylene blue (MB) over Cr-TiO₂ and TiO₂ NPs. An efficient structural design is proposed by adopting calcium alginate beads (P-Marimo beads) as a transparent scaffold for supporting our TSCT, which floats nature on the water surface and realizes easy handling as well as excellent reusability for multipurpose water purification. Surprisingly, our TSCT is found to keep its catalytic activity even after the illumination is turned off. Our proposed P-Marimo-encapsulated TSCT can be utilized as an excellent green photocatalyst with high photocatalytic performance, good recyclability, and easy handling.

Solar Thermoplasmonic Nanofurnace for High-Temperature Heterogeneous Catalysis

Most of existing solar thermal technologies require highly concentrated solar power to operate in the temperature range 300-600 °C. Here, thin films of refractory plasmonic TiN cylindrical nanocavities manufactured via flexible and scalable process are presented. The fabricated TiN films show polarization-insensitive 95% broadband absorption in the visible and near-infrared spectral ranges and act as plasmonic "nanofurnaces" capable of reaching temperatures above 600 °C under moderately concentrated solar irradiation (∼20 Suns). The demonstrated structures can be used to control nanometer-scale chemistry with zeptoliter (10^-21 L) volumetric precision, catalyzing C-C bond formation and melting inorganic deposits. Also shown is the possibility to perform solar thermal CO oxidation at rates of 16 mol h^-1 m^-2 and with a solar-to-heat thermoplasmonic efficiency of 63%. Access to scalable, cost-effective refractory plasmonic nanofurnaces opens the way to the development of modular solar thermal devices for sustainable catalytic processes.

High Incidence of Tibial Component Loosening After Total Knee Arthroplasty Using Ceramic Titanium-Nitride-Coated Mobile Bearing Prosthesis in Moderate to Severe Varus Deformity: A Matched-Pair Study Between Ceramic-Coated Mobile Bearing and Fixed Bearing Prostheses

BACKGROUND

We compared the incidence of aseptic component loosening and subsequent revision, and the survival rate between ceramic titanium-nitride-coated mobile bearing (MB) and fixed bearing total knee arthroplasties (TKAs) performed in patients with moderate to severe varus deformities.

METHODS

In total, 200 TKAs using advanced coated system posterior stabilized prostheses in varus deformity of mechanical axis >8° between 2012 and 2016 were retrospectively reviewed. One hundred MB (ceramic-m group) and 100 fixed bearing (ceramic-f group) prostheses were included. The matches were made according to preoperative demographics, range of motion, and severity of deformity. The mean follow-up period was not different (ceramic-m vs ceramic-f = 4.8 vs 5.1 years; P = .104). The incidence of revision TKA due to aseptic component loosening and the survival rate (failure: revision due to aseptic loosening) was investigated.

RESULTS

The incidence of revision TKA due to aseptic component loosening was 7 (7%) in the ceramic-m group and 1 (1%) in the ceramic-f group (P = .032). All cases of aseptic loosening occurred at the tibial component. The overall survival rate was 91.3% in the ceramic-m group and 98.9% in the ceramic-f group (P = .025).

CONCLUSION

Considering the higher revision incidence and lower survival rate due to tibial component loosening, caution should be taken in tibial component fixation when using advanced coated system MB prosthesis in moderate to severe varus deformity.

LEVEL OF EVIDENCE

III.

Application of a Novel CVD TiN Coating on a Biomedical Co-Cr Alloy: An Evaluation of Coating Layer and Substrate Characteristics

Titanium nitride (TiN) was deposited on the surface of a cobalt–chromium (Co–Cr) alloy by a hot-wall type chemical vapor deposition (CVD) reactor at 850 °C, and the coating characteristics were compared with those of a physical vapor deposition (PVD) TiN coating deposited on the same alloy at 450 °C. Neither coating showed any reactions at the interface. The face-centered cubic (fcc) structure of the alloy was changed into a hexagonal close-packed (hcp) phase, and recrystallization occurred over at 10 μm of depth from the surface after CVD coating. Characteristic precipitates were also generated incrementally depending on the depth, unlike the precipitates in the matrix of the as-cast alloy. On the other hand, the microstructure and phase of the PVD-coated alloy did not change. Depth-dependent nano-hardness measurements showed a greater increase in hardness in the recrystallization zone of the CVD-coated alloy than in the bulk center of the alloy. The CVD coating showed superior adhesion to the PVD coating in the progressive scratch test. The as-cast, PVD-coated, and CVD-coated alloys all showed negative cytotoxicity. Within the limitations of this study, CVD TiN coating to biomedical Co–Cr alloy may be considered a promising alternative to PVD technique.

Plasma enhanced atomic layer deposition of plasmonic TiN ultrathin films using TDMATi and NH3

Transition metal nitrides, like titanium nitride (TiN), are promising alternative plasmonic materials. Here we demonstrate a low temperature plasma-enhanced atomic layer deposition (PE-ALD) of non-stoichiometric TiN_0.71 on lattice-matched and -mismatched substrates. The TiN was found to be optically metallic for both thick (42 nm) and thin (11 nm) films on MgO and Si <100> substrates, with visible light plasmon resonances in the range of 550–650 nm. We also demonstrate that a hydrogen plasma post-deposition treatment improves the metallic quality of the ultrathin films on both substrates, increasing the ε₁ slope by 1.3 times on MgO and by 2 times on Si (100), to be similar to that of thicker, more metallic films. In addition, this post-deposition was found to tune the plasmonic properties of the films, resulting in a blue-shift in the plasmon resonance of 44 nm on a silicon substrate and 59 nm on MgO.

Obliquely Deposited Titanium Nitride Nanorod Arrays as Surface-Enhanced Raman Scattering Substrates

In this work, titanium nitride (TiN) nanorod arrays were prepared as surface-enhanced Raman scattering (SERS) substrates using glancing angle deposition (GLAD) in a magnetron sputtering system. The nitrogen flow rate was varied from R_N2 = 1 to 3 sccm, yielding five TiN uniform thin films and five TiN nanorod arrays. The figure of merit (FOM) of each TiN uniform film was measured and compared with the SERS signal of each TiN nanorod array. Rhodamine 6G (R6G) was used as the analyte in SERS measurement. For an R6G concentration of 10^-6 M, the analytical enhancement factor (AEF) of the TiN nanorod array that was prepared at R_N2 = 1.5 sccm was 10⁴. The time-durable SERS performance of TiN nanorod arrays was also investigated.