Dual-Responsive and ROS-Augmented Nanoplatform for Chemo/Photodynamic/Chemodynamic Combination Therapy of Triple Negative Breast Cancer

Integrating chemodynamic therapy (CDT) and photodynamic therapy (PDT) into one nanoplatform can produce much more reactive oxygen species (ROS) for tumor therapy. Nevertheless, it is still a great challenge to selectively generate sufficient ROS in tumor regions. Meanwhile, CDT and PDT are restricted by insufficient H2O2 content in the tumor as well as by the limited tumor tissue penetration of the light source. In this study, a smart pH/ROS-responsive nanoplatform, Fe2+@UCM-BBD, is rationally designed for tumor combination therapy. The acidic microenvironment can induce the pH-responsive release of doxorubicin (DOX), which can induce tumor apoptosis through DNA damage. Beyond that, DOX can promote the production of H2O2, providing sufficient materials for CDT. Of note, upconversion nanoparticles at the core can convert the 980 nm light to red and green light, which are used to activate Ce6 to produce singlet oxygen (1O2) and achieve upconversion luminescence imaging, respectively. Then, the ROS-responsive linker bis-(alkylthio)alkene is cleaved by 1O2, resulting in the release of Fenton reagent (Fe2+) to realize CDT. Taken together, Fe2+@UCM-BBD exhibits on-demand therapeutic reagent release capability, excellent biocompatibility, and remarkable tumor inhibition ability via synergistic chemo/photodynamic/chemodynamic combination therapy.

Poly(selenoviologen)-Assembled Upconversion Nanoparticles for Low-Power Single-NIR Light-Triggered Synergistic Photodynamic and Photothermal Antibacterial Therapy

The development of a highly effective photosensitizer (PS) that can be activated with a low-power single light is a pressing issue. Herein, we report a PS for synergistic photodynamic and photothermal therapy constructed through self-assembly of poly(selenoviologen) on the surface of core-shell NaYF₄:Yb/Tm@NaYF₄ upconversion nanoparticles. The hybrid UCNPs/PSeV PS showed strong ROS generation ability and high photothermal conversion efficiency (∼52.5%) under the mildest reported-to-date irradiation conditions (λ = 980 nm, 150 mW/cm², 4 min), leading to a high efficiency in killing methicillin-resistant Staphylococcus aureus (MRSA) both in vitro and in vivo. Remarkably, after intravenous injection, the reported PS accumulated preferentially in deep MRSA-infected tissues and achieved an excellent therapeutic index. This PS design realizes a low-power single-NIR light-triggered synergistic phototherapy and provides a simple and versatile strategy to develop safe clinically translatable agents for efficient treatment of deep tissue bacterial inflammations.

Selective Decoating-Induced Activation of Supramolecularly Coated Toxic Nanoparticles for Multiple Applications

In spite of the rapid emergence of numerous nanoparticles (NPs) for biomedical applications, it is often challenging to precisely control, or effectively tame, the bioactivity/toxicity of NPs, thereby exhibiting limited applications in biomedical areas. Herein, we report the construction of hyaluronic acid (HA)-laminated, otherwise toxic methylviologen (MV), NPs via ternary host-guest complexation among cucurbit[8]uril, trans-azobenzene-conjugated HA, and MV-functionalized polylactic acid NPs (MV-NPs). The high, nonspecific toxicity of MV-NPs was effectively shielded (turned off) by HA lamination, as demonstrated in cells, zebrafish, and mouse models. The supramolecular host-guest interaction-mediated HA coating offered several HA-MV-NP modalities, including hyaluronidase locally and photoirradiation remotely, to precisely remove HA lamination on demand, thereby endowing materials with the capability of selective decoating-induced activation (DIA) for applications as a user-friendly herbicide, a selective antibacterial agent, or an anticancer nanomedicine. This work offers facile supramolecular coating and DIA strategies to effectively tame and precisely control the bioactivity and toxicity of functional nanomaterials for diverse applications.

NIR-Driven Water Splitting H2 Production Nanoplatform for H2-Mediated Cascade-Amplifying Synergetic Cancer Therapy

As a newly emerging treatment strategy for many diseases, hydrogen therapy has attracted a lot of attention because of its excellent biosafety. However, the high diffusivity and low solubility of hydrogen make it difficult to accumulate in local lesions. Herein, we develop a H₂ self-generation nanoplatform by in situ water splitting driven by near-infrared (NIR) laser. In this work, core-shell nanoparticles (CSNPs) of NaGdF₄:Yb,Tm/g-C₃N₄/Cu₃P (UCC) nanocomposites as core encapsulated with zeolitic imidazolate framework-8 (ZIF-8) modified with folic acid as shell are designed and synthesized. Due to the acid-responsive ZIF-8 shell, enhanced permeability and retention (EPR) effect, and folate receptor-mediated endocytosis, CSNPs are selectively captured by tumor cells. Upon 980 nm laser irradiation, CSNPs exhibit a high production capacity of H₂ and active oxygen species (ROS), as well as an appropriate photothermal conversion temperature. Furthermore, rising temperature increases the Fenton reaction rate of Cu(I) with H₂O₂ and strengthens the curative effect of chemodynamic therapy (CDT). The excess glutathione (GSH) in tumor microenvironment (TME) can deplete positive holes produced in the valence band of g-C₃N₄ in the g-C₃N₄/Cu₃P Z-scheme heterojunction. GSH also can reduce Cu(II) to Cu(I), ensuring a continuous Fenton reaction. Thus, a NIR-driven H₂ production nanoplatform is constructed for H₂-mediated cascade-amplifying multimodal synergetic therapy.

Self-Sufficient and Highly Efficient Gold Sandwich Upconversion Nanocomposite Lasers for Stretchable and Bio-applications

Multifunctional lanthanide-doped upconversion nanoparticles (UCNPs) have spread their wings in the fields of flexible optoelectronics and biomedical applications. One of the ongoing challenges lies in achieving UCNP-based nanocomposites, which enable a continuous-wave (CW) laser action at ultralow thresholds. Here, gold sandwich UCNP nanocomposites [gold (Au¹)-UCNP-gold (Au²)] capable of exhibiting lasing at ultralow thresholds under CW excitation are demonstrated. The metastable energy-level characteristics of lanthanides are advantageous for creating population inversion. In particular, localized surface plasmon resonance-based electromagnetic hotspots in the nanocomposites and the huge enhancement of scattering coefficient for the formation of coherent closed loops due to multiple scattering facilitate the process of stimulated emissions as confirmed by theoretical simulations. The nanocomposites are subjected to stretchable systems for enhancing the lasing action (threshold ∼ 0.06 kW cm^-2) via a light-trapping effect. The applications in bioimaging of HeLa cells and antibacterial activity (photothermal therapy) are demonstrated using the newly designed Au¹-UCNP-Au² nanocomposites.

Lanthanide Sensitizers for Large Anti-Stokes Shift Near-Infrared-to-Visible Triplet-Triplet Annihilation Photon Upconversion

The upconversion of near-infrared (NIR) to visible (vis) photons is of interest for display technologies and energy conversion. Although triplet-triplet annihilation (TTA) offers a mechanism for upconversion that works efficiently at low incident irradiance flux densities, current strategies for NIR-vis upconversion based on TTA have fundamental limitations. Herein, we report a strategy for NIR-vis TTA based on lanthanide-containing complexes to sensitize the upconversion. We demonstrate a β-diketonate complex of Yb³⁺ paired with rubrene that emits yellow (λ_em = 559 nm) under NIR excitation (λ_exc = 980 nm). This corresponds to an exceptional anti-Stokes shift of just less than 1 eV. Thus, lanthanide complexes could unlock high-performance NIR-vis upconversion, with lanthanide sensitizers overcoming the energy loss, reabsorption, and short triplet lifetime that fundamentally limit porphyrin, nanocrystals, and direct S₀-T₁ sensitizers.

Dispersion stability and biocompatibility of four ligand-exchanged NaYF4: Yb, Er upconversion nanoparticles

Surface modification to obtain high dispersion stability and biocompatibility is a key factor for bio-application of upconversion nanoparticles (UCNPs). A systematic study of UCNPs modified with four hydrophilic molecules separately, comparing their dispersion stability in biological buffers and cellular biocompatibility is reported here. The results show that carboxyl-functionalized UCNPs (modified by 3,4-dihydrocinnamic acid (DHCA) or poly(monoacryloxyethyl phosphate (MAEP)) with negative surface charge have superior even-distribution in biological buffers compared to amino-functionalized UCNPs (modified by (aminomethyl)phosphonic (AMPA) or (3-Aminopropyl)triethoxysilane (APTES)) with positive surface charge. Subsequent investigation of cellular interactions revealed high levels of non-targeted cellular uptake of the particles modified with either of the three small molecules (AMPA, APTES, DHCA) and high levels of cytotoxicity when used at high concentrations. The particles were seen to be trapped as particle-aggregates within the cellular cytoplasm, leading to reduced cell viability and cell proliferation, along with dysregulation of the cell cycle as assessed by DNA content measurements. The dramatically reduced proportion of cells in G₁ phase and the slightly increased proportion in G₂ phase indicates inhibition of M phase, and the appearance of sub-G₁ phase reflects cell necrosis. In contrast, MAEP-modified UCNPs are bio-friendly with increased dispersion stability in biological buffers, are non-cytotoxic, with negligible levels of non-specific cellular uptake and no effect on the cell cycle at both low and high concentrations. MAEP-modified UCNPs were further functionalized with streptavidin for intracellular microtubule imaging, and showed clear cytoskeletal structures via their upconversion luminescence. STATEMENT OF SIGNIFICANCE: Upconversion nanoparticles (UCNP) are an exciting potential nanomaterial for bio-applications. Their anti-Stokes luminescence makes them especially attractive to be used as imaging probes and thermal therapeutic reagents. Surface modification is the key to achieving stable and compatible hydrophilic-UCNPs. However, the lack of criteria to assess molecular ligands used for ligand exchange of nanoparticles has hampered the development of surface modification, and further limits UCNP's bio-application. Herein, we report a systematic comparative study of modified-UCNPs with four distinct hydrophilic molecules, assessing each particles' colloidal stability in biological buffers and their cellular biocompatibility. The protocol established here can serve as a potential guide for the surface modification of UCNPs in bio-applications.

Optically Monitoring Mineralization and Demineralization on Photoluminescent Bioactive Nanofibers

Bone regeneration and scaffold degradation do not usually follow the same rate, representing a daunting challenge in bone repair. Toward this end, we propose to use an external field such as light (in particular, a tissue-penetrating near-infrared light) to precisely monitor the degradation of the mineralized scaffold (demineralization) and the formation of apatite mineral (mineralization). Herein, CaTiO3:Yb(3+),Er(3+)@bioactive glass (CaTiO3:Yb(3+),Er(3+)@BG) nanofibers with upconversion (UC) photoluminescence (PL) were synthesized. Such nanofibers are biocompatible and can emit green and red light under 980 nm excitation. The UC PL intensity is quenched during the bone-like apatite formation on the surface of the nanofibers in simulated body fluid; more mineral formation on the nanofibers induces more rapid optical quenching of the UC PL. Furthermore, the quenched UC PL can recover back to its original magnitude when the apatite on the nanofibers is degraded. Our work suggests that it is possible to optically monitor the apatite mineralization and demineralization on the surface of nanofibers used in bone repair.

Optical temperature sensing based on the near-infrared emissions from Nd³⁺/Yb³⁺ codoped CaWO₄

Under a 980 nm diode laser excitation, the near-infrared (NIR) emissions from Nd3+:4F7/2, 4F5/2, and 4F3/2 states in Nd3+/Yb3+ codoped CaWO4 powder were studied at temperatures ranging from 303 to 873 K. As the temperature increased, the NIR luminescence intensity was significantly enhanced and nearly 190-fold enhancement was achieved at 873 K compared with that at 303 K. By using the fluorescence intensity ratio technique, the thermometry behaviors through the NIR emissions were investigated. The results illustrate that the sensitivity and the accuracy achieved here are much higher than temperature sensors based on other rare earth ion doped materials.

Q-switched operation of a pulsed-laser-deposited Yb:Y(2)O(3) waveguide using graphene as a saturable absorber

The first, to the best of our knowledge, Q-switched operation of a pulsed-laser-deposited waveguide laser is presented. A clad Yb:Y(2)O(3) waveguide was Q-switched using an output coupling mirror coated with a single layer of graphene deposited by atmospheric pressure chemical vapor deposition. During continuous-wave operation, a maximum power of 83 mW at a slope efficiency of 25% was obtained. During Q-switched operation, pulses as short as 98 ns were obtained at a repetition rate of 1.04 MHz and a central wavelength of 1030.8 nm.

Spectral and lasing investigations of Yb:YSGG crystal

We report on a systematic study of the absorption and emission spectral properties of (Yb(0.1)Y(0.9))(3)(Sc(1.5)Ga(0.5))Ga(3)O(12) (Yb:YSGG) crystals. The broad fluorescence spectral lines indicate great potential of Yb:YSGG for tunable and ultrafast laser applications. Efficient continuous-wave (cw) laser oscillation was also demonstrated at room temperature (RT), generating an output power of 6.11 W with an optical-to-optical efficiency of 64.2%, and a slope efficiency of 80.1% with respect to absorbed pump power. The laser emission spectrum shifts to shorter wavelengths as the transmission of the output coupler varies from 3% to 20%, a result that can be explained based on the effective gain cross-sections of Yb:YSGG.

Intense ultra-broadband down-conversion in co-doped oxide glass by multipolar interaction process

We report that Eu(2+) can be an efficient sensitizer for Yb(3+) and a broadband absorber for blue solar spectra in the host of oxide glass. The greenish 4f → 5d transition of Eu(2+) and the characteristic near-infrared emission of Yb(3+) were observed, with the blue-light of xenon lamp excitation. The 5d energy can be adjusted by the host and the energy transfer efficiency can be enhanced. The quantum efficiency is up to 163.8%. Given the broad excitation band, high absorption coefficient and excellent mechanical, thermal and chemical stability, this system can be useful as down-conversion layer for solar cells.

Nonlinear spectroscopic properties of Yb3+-doped sesquioxides Lu2O3 and Sc2O3

We report on the measurements of near-UV excited-state absorption (ESA) spectra and refractive index changes (RICs) in the two ytterbium doped laser crystals Yb:Lu2O3 and Yb:Sc2O3. ESA is assigned to ligand-to-metal charge transfer (LMCT) absorption transitions and RICs to the polarizability changes experienced by the Yb3+ ions due to these strong electric-dipole allowed absorption bands.

Numerical simulation of self-compressed second-harmonic generation in type II potassium dihydrogen phosphate with a time predelay for Yb-doped solid-state lasers

We report numerical results of second-harmonic generation in a type II potassium dihydrogen phosphate crystal with a time predelay for picosecond and/or femtosecond Yb-doped solid-state lasers, and clarify the dependence of the self compression in the second-harmonic laser pulse on the initial frequency chirp, fundamental duration and intensity, and phase-mismatching angle. We also show numerically the generation possibility of a self-compressed second-harmonic laser pulse near 20 fs.

Curing depths of a universal hybrid and a flowable resin composite cured with quartz tungsten halogen and light-emitting diode units

This in vitro study evaluated curing depths of a universal hybrid resin composite with two viscosities (Tetric Ceram and Tetric Flow) after curing with 6 different quartz tungsten halogen and light-emitting diode curing units. Irradiance (light intensity) of the curing units varied between 200 and 700 mW/cm2. The curing units were used for standard, soft-start, or pulse curing. Curing times were 20 and 40 s for standard curing, 3 + 10 s and 3 + 30 s for pulse curing, and 40 s for soft-start. Resin composite specimens, 5 in each group, with a diameter of 4 mm and a height of 6 mm, were made in brass molds and cured from one side at a distance of 6 mm. After 2 weeks, the specimens were ground longitudinally half through the specimen. Curing depth was then determined by measurement of Wallace hardness for each half millimeter starting at 0.5 mm from the top surface. For all curing units and for both resin composites an increased curing time led to statistically significantly higher depth of cure (P < 0.0005). Tetric Flow showed a statistically significantly higher depth of cure than Tetric Ceram (P < 0.0005). All curing units cured more than 2.0 mm of both composites from a distance of 6 mm at 20 s curing time. The value for 40 s was 3.0 mm. The composite closer to the surface than the depth of cure value was equally well cured with all curing units investigated. There was a significant linear correlation between the determined irradiance of the curing units and the depths of cure obtained (20s: r = 0.89, P < 0.025; 40 s: r = 0.91, P < 0.01).