Exploring Steroidal Saponin Composition and Morphometric Characteristics of Rhizomes from Trillium govanianum Wall. ex D. Don: Inference for Medicinal Properties and Genetic Stock Improvement

Trillium govanianum, a medicinal herb, exhibiting diverse morphometric traits and phytochemicals across developmental stages of plants. The changes in the chemical profile and steroidal saponin levels in the rhizome of T. govanianum across different developmental stages were previously unknown. This study categorizes rhizomes into three types based on scar presence: juvenile (5-10 scars, Type I), young (11-19 scars, Type II), and mature (21-29 scars, Type III). Rhizomes show varying sizes (length 1.2-4.7 cm, girth 0.3-1.6 cm), weight (0.18-5.0 g), and extractive yields (9.7-16.1 % w w-1), with notable differences in saponin content (5.95-21.9 mg g-1). Ultra-high performance liquid chromatography-MS/MS (UHPLC-QTOF-MS/MS)-based chemical profiling identifies 31 phytochemicals, mainly including diverse saponins. Ultra-high performance liquid chromatography coupled with evaporative light scattering detection (UHPLC-ELSD)-based quantitative analysis of seven key saponins reveals stage-specific accumulation patterns, with protodioscin (P) and dioscin (DS) predominant in mature rhizomes. Statistical analysis confirms significant variation (p=0.001) in saponin levels across developmental stages with chemical constituent protodioscin (P=4.03±0.03-15.76±0.14 mg g-1, PAve=9.79±3.03 mg g-1) and dioscin (DS=1.23±0.06-3.93±0.07 mg g-1, DSAve=2.59±0.70 mg g-1), with acceptable power (p=0.738; |δ|>0.5) statistics for effective sample size (n=27 samples used in the study) of T. govanianum. Principal Component Analysis (PCA) and Euclidean clustering further highlighted chemotype distinctions.

A morphometric medial compartment-specific unicompartmental knee system: 5 years follow up results from a pilot center

BACKGROUND

Unicompartmental Knee Arthroplasty (UKA) is a valuable solution for the treatment of medial osteoarthritis of the knee. New implants feature designs for the elective substitution of a specific compartment. Aim of this study was to assess the survivorship and functional outcomes at minimum 4 years of the first 60 implanted patients in a pilot center of a new medial UKA as the evolution of a well performing long lasting fixed bearing implant.

METHODS

Between June 2017 and the end of 2018, 60 medial UKA were implanted in 58 patients. All patients were available for the last follow up and were analyzed prospectively. 37 were females and 21 were males with a mean age of 67 years (SD 10,71) and a mean of BMI 27.16 (SD 3.94) for the male population and of 26.73 (SD 4.05) for the female population.

RESULTS

At final follow up the mean Oxford Knee Score (OKS) was 44,02 (SD 3,1) and the mean Forgotten Joint Score (FJS) 78,6 (SD 7,9). The Knee Society Score (KSS) score was 95,2 for the "knee" score and 89.8 for the "function" score. No patients were revised. Kaplan-Meyer survival estimate showed a 100% survivorship at final follow up. No progressive radiolucent lines were found and no direct or indirect signs of polyethylene wear were registered on the final radiographs.

CONCLUSIONS

This new implant demonstrated promising clinical results with an excellent survival rate at short to midterm follow- up. Further follow up is needed to confirm this trend at longer term.

Morphometric features, seminal profile and diluters effect on post-thaw semen quality of Munshiganj cattle in Bangladesh

The study investigates morphometric features, seminal profile and post-thaw semen quality of Munshiganj cattle. Morphometric features were measured using measuring tape from 20 Munshiganj cattle while coat color was measured by observing in naked eye. Fresh and post thaw semen quality parameters were analyzed using Computer Assisted semen analyzer (CASA). Coat color of Munshiganj male cattle were creamy white to dull pinkish and female were white to creamy. The mean body weight, body length, hearth girth, height at wither, head length, head width, ear length, ear width, fore leg length, hind leg length, tail length, tail doc circumference, horn length, horn diameter and mouth circumference were 362.80 kg, 137.31 cm, 160.66 cm, 135.21 cm, 50.97 cm, 20.58 cm, 19.75 cm, 9.88 cm, 73.02 cm, 74.84 cm, 106.10 cm, 20.75 cm, 13.60 cm, 16.12 cm and 43.00 cm, respectively. There was significant difference (p < 0.05) between male and female in terms of body weight (418.00 vs 307.60 kg), heart girth (173.74 vs 147.57 cm), head width (22.50 vs 18.67 cm), horn diameter (18.58 vs 13.66 cm) and mouth circumference (46.60 vs 39.40 cm). Average scrotal length was 16.76 cm while scrotal circumference was 32.70 cm. Age had significant effect (p < 0.05) on morphometric characteristics of Munshiganj male and female cattle. On the other hand, season had no significant effect on semen quality. Mean semen volume, sperm concentration, total motile, progressive, static, slow and live spermatozoa were 5.83 ± 0.88 ml, 1510.27 ± 844.07 million/ml, 91.9 ± 2.17 %, 63.80 ± 12.53 %, 8.10 ± 2.17 %, 0.10 ± 0.10 %, 91.38 ± 0.25 %, respectively. On the other hand, sperm head length and width, sperm tail length of Munshiganj cattle were 10.39 ± 0.16 μm, 4.26 ± 0.07 μm, 21.5 ± 0.52 μm, respectively. Individual breeding bull had a significant (p < 0.05) effect on post-thawed motile sperm percentage. Four different diluters (Triladyl, Steridyl, Tris-egg yolk-Citrate and Andromed) were used to compare the effects of diluter on post-thaw semen quality of Munshiganj cattle and found that diluter had no significant effect (p > 0.05) on post thaw semen quality except slow motility and proximal droplet percentages. Munshiganj cattle had a distinctive phenotypic feature with standard quality semen and had no effect of egg yolk free and egg yolk based diluters on post thaw semen quality.

Morphometric studies on the appendicular bony skeleton of the ostriches (Struthio Camelus)

BACKGROUND

Morphometric study of the bony elements of the appendicular skeleton in the ostrich was fully described and identified. The appendicular skeleton included the bones of the pectoral girdle, the wing, the pelvic girdle and the pelvic limb.

RESULTS

The shoulder girdle of the ostrich included the scapula and coracoid bones. The scapula appeared as a flattened spoon-like structure. The coracoid bone appeared quadrilateral in outline. The mean length of the scapula and coracoid (sternal wing) were 15.00 ± 0.23 and 10.00 ± 0.17 cm, respectively. The wing included the humerus, ulna, radius, radial carpal bone, ulnar carpal bone, carpometacarpus and phalanges of three digits. The mean length of the humerus, radius, and ulna were 33.00 ± 0.46, 10.50 ± 0.40 and 11.50 ± 0.29 cm respectively. The carpometacarpus was formed by the fusion of the distal row of carpal bones and three metacarpal bones. Digits of the wing were three in number; the alular, major and minor digits. Os coxae comprised the ilium, ischium and pubis. Their mean lengths were 36.00 ± 0.82 cm, 32.00 ± 0.20 and 55.00 ± 0.2.9 cm, respectively. The femur was a stout short bone, that appeared shorter than the tibiotarsus. The mean length of the femur, tibiotarsus, and tarsometatarsus were 30.00 ± 0.23, 52.00 ± 0.50 and 46.00 ± 0.28 cm. Tibiotarsus was the longest bone in the pelvic limb. The fibula was a long bone (44.00 ± 0.41 cm) lying along the lateral surface of the tibiotarsus. The tarsometatarsus was a strong long bone formed by the fusion of the metatarsal (II, III, IV) and the distal row of tarsal bones. It was worth mentioning that metatarsal II was externally absent in adults.

CONCLUSIONS

In the appendicular skeleton of ostrich, there were special characteristic features that were detected in our study; the clavicle was absent, the coracoid bone was composed of a sternal wing and scapular wing, the ulna was slightly longer in length than the radius. The coupled patellae i.e., the proximal and distal patella were observed; and the ostrich pedal digits were only two; viz., the third (III) and fourth (IV) digits.

Phenotypic characterization of donkey population in South Omo Zone, Southern Ethiopia

The study conducted in South Omo Zone, Southern Ethiopia with the aim of investigation within population diversification and characterization morphologically that helps to fill the gap of molecular characterization on this population. The data was collected from 500 adult donkeys from both sexes. Quantitative data was subjected to SAS GLM procedures by fitting districts and sex as the main effects. Qualitative data was subjected to a chi-square test with the district as the main effect. Color graph of donkey was done using Microsoft Excel, 2010. For both qualitative and quantitative data, the significance test was conducted at 5% of the level of error, and Tukey multiple range tests were used to separate the significance levels for the two types of data. CANDISC was used to calculate Mahalanobis distances, DISCRIM was used to cluster observations into predetermined groups, and STEPDISC was used to determine the quantitative characteristics that better differentiate populations. Roan coat color cover highest number compare with other coat color of donkey population. Quantitative traits of donkey has variation (P < 0.05) both in study areas and sex of donkeys. Overtly, except height at wither and height at the back Hammer donkey has mostly better metric value than the rest districts of the study areas. Moreover, CANDISC show variation on Hammer and Dasenech districts of donkey population. Furthermore, the longest (6.32) Mahalanobis distance observed in between Hammer and Dasenech donkey population. The Hammer and Dasenech donkey population is where the study fills in population variation the most. This can be because to management or genetics. Therefore, additional research might be required. Furthermore, morphometric measures show that donkey sex is similar, with the exception of heart girth circumference. This can be the result of poor selection, where superior male donkeys are sold for a higher price. Therefore, sound breeding programs should be used to reverse it.

Software-assisted preoperative planning of S1 Alar Iliac screws: a 3D morphometric and anatomical study

PURPOSE

S1 alar iliac (S1AI) trajectory has gained popularity as a salvage technique for revision surgeries and failed constructs in the lumbopelvic region. This study aims to investigate the morphometry of this new trajectory based on 3D models. The possible role of gender, ethnicity and view angle (surgeon's vs. radiologist's) was investigated.

METHODS

Computed tomography-driven virtual 3D models of spinopelvic region were created applying Materialize MIMICS software, and assessed for coronal and sagittal radiographic versus surgeon's view angles, and morphometry of the screw trajectory. Independent-samples t test was used to analyze the results. P value was set at <  = 0.05. The Statistical Package for the Social Sciences Software (SPSS version 24.0) was used for the statistical analysis.

RESULTS

A total of 164 3D models were simulated with a total 328 screws inserted satisfactorily within the S1AI trajectory. S1AI instrumentation was feasible in 96.48%. The mean radiological coronal angle was 50.619' ± 8.590' and the mean coronal angle for surgeons' perspective was 10.263' ± 5.860'. The mean radiological and surgeon's perspective sagittal angles were found to be 44.532' ± 6.424' and 31.164' ± 5.455', respectively. A statistically significant difference was found between anatomical and surgeon's perspective trajectories. Neither the pelvic laterality nor the gender influence the screw angles, length and diameter in radiological versus surgeon's view angles.

CONCLUSION

Preoperative 3D modeling would be an invaluable adjunct to increase the accuracy of S1AI screw placement. Surgeon's perspective of the trajectory differs from standard CT sections and should be considered in preoperative planning.

Anatomy of the mastoid triangle and morphometric sex differences

OBJECTIVE OF THE STUDY

This study aimed to quantify the area of the mastoid triangle (MT) and assess potential morphometric differences between males and females.

PATIENTS

The sample consisted of 244 dry human skulls, with biological sex known based on genetic analysis, collected from a medicolegal osteological database from Central-Western Brazil.

MATERIALS AND METHODS

The study was observational, analytical, and cross-sectional. The skulls were analyzed using Heron's equation to calculate the area of the MT. The landmarks connecting each of the sides of the triangle were: Porion (Po)>Mastoidale (Ma)>Asterion (Ast). Morphometric references were calculated and compared based on sex.

RESULTS

The area of the MT was nearly 14% larger in males compared to females (p<0.05). The mean MT area for the right and left sides of males were 684.11±93.25mm² and 668.94±111.95mm², respectively. In females, the mean MT for the right and left sides were 588.93±91.09mm² and 582.88±102.98mm², respectively. Right and left side measurements were significantly different (p<0.05), except for Po-Ast (p=0.232).

CONCLUSION

Morphometric features regarding the MT were slightly different between males and females. Application of the MT as a dimorphic tool should be adjuvant. Moreover, this tool should be considered carefully, especially because the sex-based differences were statistically significant, but discrete between males and females.

A computed tomography (CT) based morphometric study of superior pubic ramus anatomy among Arabs to determine safe intramedullary pubic rami screw insertion

PURPOSE

To assess the morphometric variables of the superior pubic ramus in an Arab/ Middle Eastern population to establish a safe pubic screw fixation technique.

METHODS

Cross-sectional retrospective analysis of computed tomography (CT) pelvic images. Morphometric data were extracted including; on pubic ramus length, insertion angles, potential danger zones and ramus diameters. The correlation between pubic rami diameter and patient demographics was also analyzed.

RESULTS

A total of 231 participants were included (45% female). The mean pubic ramus length was 104 mm in females and 127 mm in males. The narrowest canal diameters at the para-symphyseal area were; 7.35 mm (males) and 4.75 mm (females). The mediolateral insertion angle was 49.4° in females and 41.8° in males. The cephalic-caudal angle was 49.9° in males and 42.1° in females. The mean distance from the lateral ilium entry point to the joint articular surface was 23.5 mm in males and 19.9 mm in females. The symphysis pubis to tubercle exit point was higher in females than males (24.2 mm vs 16.6 mm, respectively). There was a significant positive correlation between age and pubic ramus diameters in all age groups.

CONCLUSION

The results from this study suggest that percutaneous pubic rami screw fixation using the standard 6.5 or 7.3 mm cannulated screw system may potentially be unsafe in female Arab patients. This subset of patients may require alternative non-cannulated screws (3.5-4.5 mm) or plate options. Further, female patients may have a higher risk of acetabular joint penetration, while males have a potentially higher risk of pudendal nerve injury.

In Vivo Evaluation of BBB Integrity in the Post-stroke Brain

The blood-brain barrier (BBB) is a dynamic interface responsible for maintaining central nervous system (CNS) homeostasis. An intact BBB protects the brain from undesired compounds and proteins from the blood; however, BBB impairment is involved in various pathological conditions including stroke. In vivo evaluation of BBB integrity in the post-stroke brain is important for investigating stroke-induced CNS pathogenesis and developing CNS-targeted therapeutic agents. In this chapter, we describe both quantitative and morphometric methods and tools to evaluate BBB integrity in vivo. These methods do not require expensive magnetic resonance imaging (MRI) and computed tomography (CT) imaging capabilities and can be conducted in research laboratories with access to a confocal microscope and fluorescence microplate reader.

Investigation of the combined effects of cadmium chloride, silver nitrate, lead nitrate, methyl jasmonate, and salicylic acid on morphometric and biochemical characteristics of St. John's wort

Hypericum perforatum L., is a sprawling, leafy herb that grows in open, disturbed areas, known as St. John's wort, has a variety of secondary metabolites that can be used for medicinal and therapeutic purposes. Heavy metals have become the most dangerous pollutants in the environment. The effect of cadmium chloride, lead nitrate, silver nitrate, methyl jasmonate, and salicylic acid was studied on several morphometric and biochemical features of St. John's wort simultaneously using the Taguchi statistical method. The results showed cadmium chloride and lead nitrate reduced the morphometric and biochemical properties of St. John's wort while salicylic acid compensated for the adverse effects of heavy metals. Simultaneously, use of salicylic acid and silver nitrate with cadmium chloride and lead nitrate reduced the toxic effects of these metals on morphometric properties. Methyl jasmonate improved growth characteristics at low levels and inhibited at higher levels. Also, according to the results, salicylic acid could reduce the effects of heavy metals on the biochemical properties, while silver nitrate acts like heavy metals, especially at higher levels. Salicylic acid reduced the harmful effects of these heavy metals and at all levels was able to create a better induction effect on St. John's wort. These elicitors mainly changed the adverse effects of heavy metals by strengthening the pathways of the antioxidant system in St. John's wort. The research assumptions were validated, which suggests that the Taguchi method could be considered in an optimum culture of medicinal plants under different treatments such as heavy metals and elicitors.

Morphological and biochemical responses of tropical seagrasses (Family: Hydrocharitaceae) under colonization of the macroalgae Ulva reticulata Forsskål

BACKGROUND

Coastal land development has deteriorated the habitat and water quality for seagrass growth and causes the proliferation of opportunist macroalgae that can potentially affect them physically and biochemically. The present study investigates the morphological and biochemical responses of seagrass from the Hydrocharitaceae family under the macroalgal bloom of Ulva reticulata, induced by land reclamation activities for constructing artificial islands.

METHODS

Five seagrass species, Enhalus acoroides, Thalassia hemprichii, Halophila ovalis, Halophila major, and Halophila spinulosa were collected at an Ulva reticulata-colonized site (MA) shoal and a non-Ulva reticulata-colonized site (MC) shoal at Sungai Pulai estuary, Johor, Malaysia. Morphometry of shoots comprising leaf length (LL), leaf width (LW), leaf sheath length (LSL), leaflet length (LTL), leaflet width (LTW), petiole length (PL), space between intra-marginal veins (IV) of leaf, cross vein angle (CVA) of leaf, number of the cross vein (NOC), number of the leaf (NOL) and number of the leaflet (NOLT) were measured on fresh seagrass specimens. Moreover, in-situ water quality and water nutrient content were also recorded. Seagrass extracts in methanol were assessed for total phenolic content (TPC), total flavonoid content (TFC), 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity (DPPH), 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid radical cation scavenging activity (ABTS), and ferric reducing antioxidant power (FRAP).

RESULTS

Seagrasses in the U. reticulata-colonized site (MA) had significantly higher (t-test, p < 0.05) leaf dimensions compared to those at the non-U. reticulata colonized site (MC). Simple broad-leaved seagrass of H. major and H. ovalis were highly sensitive to the colonization of U. reticulata, which resulted in higher morphometric variation (t-test, p < 0.05) including LL, PL, LW, and IV. Concerning the biochemical properties, all the seagrasses at MA recorded significantly higher (t-test, p < 0.05) TPC, TFC, and ABTS and lower DPPH and FRAP activities compared to those at MC. Hydrocharitaceae seagrass experience positive changes in leaf morphology features and metabolite contents when shaded by U. reticulata. Researching the synergistic effect of anthropogenic nutrient loads on the interaction between seagrasses and macroalgae can provide valuable information to decrease the negative effect of macroalgae blooms on seagrasses in the tropical meadow.

Mitochondrial sequence based characterization and morphometric assessment of Diara buffalo population

Objective

The present study is aimed at phenotypic characterization and mitochondrial d-loop analysis of indigenous “Diara” buffalo population, which are mostly confined to the villages on the South and North Gangetic marshy plains in the Bihar state of India. These buffaloes are well adapted and are best suited for ploughing and puddling the wet fields meant for paddy cultivation.

Methods

Biometric data on 172 buffaloes were collected using a standard flexible tape measure. Animals are medium in size; the typical morphometric features are long head with a broad forehead and moderately long and erect ears. Genomic DNA was isolated from unrelated animals. The mtDNA d-loop 358-bp sequence data was generated and compared with 338 sequences belonging to riverine and swamp buffaloes.

Results

Based on the mitochondrial d-loop analysis the Diara buffaloes were grouped along with the haplotypes reported for riverine buffalo. Sequence analysis revealed the presence of 7 mitochondrial D loop haplotypes with haplotype diversity of 0.9643. Five of the haplotypes were shared with established swamp breeds and with Buffalo population of Orissa in India.

Conclusion

Morphometric analyses clearly shows distinguishing features like long and broad forehead which may be useful in identification. The germplasm of Diara buffalo is much adapted to the marshy banks of river Ganga and its tributaries. It constitutes a valuable genetic resource which needs to be conserved on priority basis.

Morphometric and morphokinetic differences in the sperm- and oocyte-originated pronuclei of male and female human zygotes: a time-lapse study

PURPOSE

To study the morphometric and morphokinetic profiles of pronuclei (PN) between male and female human zygotes.

METHOD(S)

This retrospective cohort study included 94 consecutive autologous single day 5 transfer cycles leading to a singleton live birth. All oocytes were placed in the EmbryoScope + incubator post-sperm injection with all annotations performed retrospectively by one embryologist (L-SO). Timing parameters included 2nd polar body extrusion (tPB2), sperm-originated PN (tSPNa) or oocyte-originated PN (tOPNa) appearance, and PN fading (tPNF). Morphometrics were evaluated at 8 (stage 1), 4 (stage 2), and 0 h before PNF (stage 3), measuring PN area (um²), PN juxtaposition, and nucleolar precursor bodies (NPB) arrangement.

RESULTS

Male zygotes had longer time intervals of tPB2_tSPNa than female zygotes (4.8 ± 0.2 vs 4.2 ± 0.1 h, OR = 1.442, 95% CI 1.009-2.061, p = 0.044). SPN increased in size from stage 1 through 2 to 3 (435.3 ± 7.2, 506.7 ± 8.0, and 556.3 ± 8.9 um², p = 0.000) and OPN did similarly (399.0 ± 6.1, 464.3 ± 6.7, and 513.8 ± 6.5 um², p = 0.000), with SPN being significantly larger than OPN at each stage (p < 0.05 respectively). More male than female zygotes reached central PN juxtaposition at stage 1 (76.7% vs 51.0%, p = 0.010), stage 2 (97.7% vs 86.3%, p = 0.048), and stage 3 (97.7% vs 86.3%, p = 0.048). More OPN showed aligned NPBs than in SPN at stage 1 only (44.7% vs 28.7%, p = 0.023).

CONCLUSION(S)

Embryos with different sexes display different morphokinetic and morphometric features at the zygotic stage. Embryo selection using such parameters may lead to unbalanced sex ratio in resulting offspring.

Morphometric measurement of the proximal tibia to design the tibial component of total knee arthroplasty for the Thai population

Purpose

This study evaluates the morphology of the Thai proximal tibia based on three-dimensional (3D) models to design the tibial component.

Methods

The 3D models of 480 tibias were created using reverse engineering techniques from computed tomography imaging data obtained from 240 volunteers (120 males, 120 females; range 20–50 years). Based on 3D measurements, a digital ruler was used to measure the distance between the triangular points of the models. The morphometric parameters consisted of mediolateral length (ML), anteroposterior width (AP), medial anteroposterior width (MAP), lateral anteroposterior width (LAP), central to a medial length (CM), central to a lateral length (CL), medial anterior radius (MAR), lateral anterior radius (LAR), and tibial aspect ratio (AR). An independent t-test was performed for gender differences, and K-means clustering was used to find the optimum sizes of the tibial component with a correlation between ML length and AP width in Thai people.

Results

The average morphometric parameters of Thai proximal tibia, namely ML, AP, MAP, LAP, CM, and CL, were as follows: 72.52 ± 5.94 mm, 46.36 ± 3.84 mm, 49.22 ± 3.62 mm, 43.59 ± 4.05 mm, 14.29 ± 2.72 mm, and 15.28 ± 2.99 mm, respectively. The average of MAR, LAR, and AR was 24.43 ± 2.11 mm, 21.52 ± 2.00 mm, and 1.57 ± 0.08, respectively. All morphometric parameters in males were significantly higher than those of females. There was a difference between the Thai proximal tibia and other nationalities and a mismatch between the size of the commercial tibial component and the Thai knee. Using K-means clustering analysis, the recommended number of ML and AP is seven sizes for the practical design of tibial components to cover the Thai anatomy.

Conclusion

The design of the tibial component should be recommended to cover the anatomy of the Thai population. These data provide essential information for the specific design of Thai knee prostheses.

Morphological and molecular differentiation between Culicoides oxystoma and Culicoides kingi (Diptera: Ceratopogonidae) in Tunisia

Background

Culicoides kingi and Culicoides oxystoma belong to the Schultzei group of biting midges. These two species are vectors of disease in livestock of economic importance. As described in the literature, morphological identification for discrimination between them is still unclear. However, species-specific identification is necessary to solve taxonomic challenges between species and to understand their roles in disease transmission and epidemiology. This study aims to develop accurate tools to discriminate C. oxystoma from C. kingi using traditional morphometry and polymerase chain reaction-restriction fragment length polymorphism (PCR RFLP) assays for use in developing countries.

Methods

Specimens were collected from the region of Kairouan in central Tunisia. A total of 446 C. oxystoma/C. kingi individuals were identified using traditional morphometric analyses combined with PCR–RFLP of the cytochrome c oxidase subunit I gene. Thirteen morphometric measurements were performed from the head, wings, and abdomen of slide-mounted specimens, and six ratios were calculated between these measurements. Multivariate analyses of the morphometric measurements were explored to identify which variables could lead to accurate species identification.

Results

Four variables, namely antennae, wings, spermathecae, and palpus length, were suitable morphometric characteristics to differentiate between the species. Digestion with the SspI restriction enzyme of the PCR product led to good discriminative ability. Molecular procedures and phylogenetic analysis confirmed the efficiency of this simple and rapid PCR–RFLP method.

Conclusions

This study highlights for the first time in Tunisia the presence of C. oxystoma and its discrimination from C. kingi using abdominal measurements and the PCR–RFLP method. This approach could be applied in future epidemiological studies at the national and international levels.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s13071-021-05084-8.

Morphometric analysis of the proximal thoracic pedicles in Lenke II and IV adolescent idiopathic scoliosis: an evaluation of the feasibility for pedicle screw insertion

PURPOSE

Pedicles on the concave side of the proximal thoracic (PT) curve in adolescent idiopathic scoliosis (AIS) patients with Lenke II and IV deformities tend to be narrow and dysplastic, making pedicle screw (PS) insertion challenging. The aim of this study was to evaluate the feasibility for PS placement in these patients using pedicle chord length, diameter, and channel morphology.

METHODS

In this retrospective study, 56 consecutive AIS patients with Lenke II or IV curves who underwent instrumented posterior spinal fusion (PSF) were studied. The mean age at surgery was 14.8 years and the mean PT curve measured 45°. Two independent investigators evaluated all visible pedicles from T₁ to T₆ vertebral levels using axial images from intraoperative computed tomography-guided navigation recording the pedicle: (1) maximum transverse diameter 'd' at the isthmus, (2) maximum chord length 'l', and (3) qualitative assessment of the channel morphology (types A-D).

RESULTS

Two hundred and sixty-eight concave and 264 convex pedicles were measured. The mean 'd' of the concave pedicles at T₃ and T₄ was < 3.0 mm, compared to > 5.0 mm for the convex counterparts (p < 0.001). Of all concave pedicle channels, 48% had morphology characteristics that were riskier for PS cannulation (type C or D) compared to 2% of all convex pedicle channels (type A or B) (p < 0.001).

CONCLUSION

Almost half of all concave pedicles have morphologic characteristics that make them too small to accommodate a PS. Though PSs could be inserted using an in-out-in technique in these patients, alternative fixation anchors may improve strength and safety.

Morphometric analysis of patella and patellar ligament: a cadaveric study to aid patellar tendon grafts

PURPOSE

Morphometric analysis of the patella and the patellar ligament is crucial in diagnosing and surgical corrections of knee injuries and patellofemoral joint disorders. Dimensions of the patella and the patellar ligament are frequently used in implant design and ACL reconstruction. This study aims to obtain detailed morphometric data on the patellar ligament and its localization based on gross anatomical dissections in the adult cadavers.

METHODS

The present study consisted of 50 lower limbs from formalin-fixed male adult cadavers aged about 70 years (45-85) belonging to the South Indian population. Total length of the quadriceps tendon, patellar height, patellar ligament height, proximal width, distal width and thickness of the patellar ligament were measured meticulously. Mean, standard deviation, median scores of each parameter were computed for groups using SPSS 16.0. Level of significance was considered as p < 0.05. Wilcoxon signed-rank test was used to compare the various parameters on the right and left limbs. The relationships between all parameters were analyzed using Spearman's rank correlation test.

RESULTS

There was no statistically significant difference in the various measurements of the patella and patellar ligament between the right and left lower limbs. Patellar ligament length showed positive correlation with ligament thickness (r = 0.36; p = 0.078 for right limb and r = 0.33; p = 0.104 for left limb). Proximal width of ligament showed significant positive correlation with distal width (r = 0.41; p = 0.041 for right limb and r = 0.54; p = 0.006 for left limb).

CONCLUSION

This morphometric data and analysis might be fundamental in understanding various knee conditions in situ and necessary to orthopedic surgeons for successful planning and execution for ACL reconstruction using patellar ligament graft and other patellofemoral joint disorders.

LEVEL OF EVIDENCE

I.

Video-based calcification assay: A novel method for kinetic analysis of osteogenesis in live cultures

Traditional methods of quantifying osteoblast calcification in culture require the use of calcium sensitive dyes, such as Arsenazo III or Alizarin Red S, which have been successfully used for decades to assess osteogenesis. Because these dyes elicit a colorimetric change when reacted with a cell lysate and are cytotoxic to live cells, they forfeit the ability to trace calcification longitudinally over time. Here, we demonstrate that image analysis and quantification of calcification can be performed from a series of time-lapse images acquired from videos. This method capitalizes on the unique facet of the mineralized extracellular matrix to appear black when viewed with phase contrast optics. This appearance of calcified areas had been previously documented to be characteristic to the formation of bone nodules in vitro. Due to this distinguishable appearance, extracting the information corresponding to calcification through segmentation allowed us to threshold only the pixels that comprise the mineralized areas in the image. Ultimately, this method can be used to quantify calcification yield, rates and kinetics facilitating the analyses of bone-supportive properties of growth factors and morphogens as well as of adverse effects elicited by toxicants. It may also be used on images that were acquired manually.•

The method is less error-prone than absorption-based assays since it takes longitudinal measurements from the same cultures

•

It is cost effective as it foregoes the use of calcium-sensitive dyes

•

It is automatable and amenable to high-throughput and thus allows the concurrent quantification of multiple parameters of differentiation

Health status of fathead minnow (Pimephales promelas) populations in a municipal wastewater effluent-dominated stream in the Canadian prairies, Wascana Creek, Saskatchewan

Their unique hydrological and climatic conditions render surface water systems in the southern Canadian Prairies at an elevated risk from exposure to contaminants released from municipal wastewater effluents (MWWEs). The aim of this study was to characterize the potential health effects and their underlying molecular mechanisms in populations of fathead minnow (Pimephales promelas; FHM) in Wascana Creek, an effluent dominated stream in Southern Saskatchewan, Canada. Studies were conducted during the spawning season in 2014 and 2015 to assess responses in terms of overall health, reproductive functions, plasma sex steroid hormone levels, and expression of selected genes along the hypothalamus-pituitary-gonadal axis. FHM downstream of the effluent fallout had lower gonadosomatic indices and significantly greater hepatosomatic indices compared to upstream populations. In both male and female FHMs, significantly greater occurrence and severity of gonadal degradation and delayed maturation were observed in downstream fish compared to upstream fish. Downstream males also displayed lower scores of secondary sexual characteristics and a decreasing trend in plasma 11-ketotestosterone levels. Interestingly, no indications of exposure to estrogenic compounds, such as occurrence of testicular oocytes were observed, which was in accordance with the lack of presence of key biomarkers of estrogenic exposure, such as induction of vitellogenin. In general, expression of the majority of transcripts measured in FHMs downstream of the effluent fallout was significantly downregulated, which supports observations of the general deterioration of the health and reproductive status of these fish. Chemical analysis indicated that 10 pharmaceuticals and personal care products (PPCPs) were present at the downstream site, some at sufficiently great concentrations that may present a risk to aquatic organisms. With continuous exposure to a diverse number of stressors including high nutrient and ammonia levels, the presence of a variety of PPCPs and other contaminants, Wascana Creek should be considered as an ecosystem at risk.

Is there a morphometric cause of Chiari malformation type I? Analysis of existing literature

Although many etiologies have been proposed for Chiari malformation type I (CM-I), there currently is no singular known cause of CM-I pathogenesis. Advances in imaging have greatly progressed the study of CM-I. This study reviews the literature to determine if an anatomical cause for CM-I could be proposed from morphometric studies in adult CM-I patients. After conducting a literature search using relevant search terms, two authors screened abstracts for relevance. Full-length articles of primary morphometric studies published in peer-reviewed journals were included. Detailed information regarding methodology and symptomatology, craniocervical instability, syringomyelia, operative effects, and genetics were extracted. Forty-six studies met inclusion criteria, averaging 93.2 CM-I patients and 41.4 healthy controls in size. To obtain measurements, 40 studies utilized MRI and 10 utilized CT imaging, whereas 41 analyzed parameters within the posterior fossa and 20 analyzed parameters of the craniovertebral junction. The most commonly measured parameters included clivus length (n = 30), tonsillar position or descent (n = 28), McRae line length (n = 26), and supraocciput length (n = 26). While certain structural anomalies including reduced clivus length have been implicated in CM-I, there is a lack of consensus on how several other morphometric parameters may or may not contribute to its development. Heterogeneity in presentation with respect to the extent of tonsillar descent suggests alternate methods utilizing morphometric measurements that may help to identify CM-I patients and may benefit future research to better understand underlying pathophysiology and sequelae such as syringomyelia.

Sexual dimorphism in mud crabs: a tale of three sympatric Scylla species

Sexual dimorphism is a common phenomenon in the animal kingdom. To test the consistency of sexual dimorphism patterns among sympatric species of the same genus, ten morphometric characteristics of mud crabs Scylla olivacea, S. tranquebarica and S. paramamosain were measured and compared using Discriminant Function Analysis (DFA). The descriptive analysis revealed that in all three species, body size dimensions and cheliped dimensions were significantly larger in males whereas the abdomen width was female-biased. Also, we described a morphological variation (carapace width, CW ≤ CW at spine 8, 8CW) that is unique to S. olivacea. Discriminant function analysis revealed that all nine morphometric characteristics were sexually dimorphic in S. olivacea, S. tranquebarica (except right cheliped's merus length, ML) and S. paramamosain (except 8CW). The obtained discriminant functions based on the morphometric ratios (with CW as divisor) correctly classified 100% of adults of known sex of all three species. Further, based on the selected body traits, DFA was able to almost completely distinguish males (94%), but not females (74%), among the three Scylla species. This study highlights that congeneric species of portunids (e.g., Scylla spp.) show similar sexually dimorphic characteristics (body size and secondary sexual characteristics).

Power of phenotypes in discriminating Awassi sheep to pure strains and from other breeds

The phenotypic description is the oldest method for animal taxonomic studies. In this study, we report phenotypic traits of discriminant power to assign sheep individuals into Awassi breed or other exotic breeds found in Jordan. Twenty-two and 19 phenotype traits for ewes and rams, respectively, were utilized using multivariate and discriminant analyses. Seven traits, out of them, for ewes and five for rams were qualitative traits: body color, nose shape, horn presence, ear shape, wattles presence, udder shape, and teat placement. The other 15 traits were quantitative traits: body weight, head width, head length, chest depth, chest girth, shoulder width, withers height, foreleg height, shin circumference, body length, rump width, rump length, rump height, rear leg height, and udder height. The traits were taken on 1697 and 652 adult ewes and rams of different breeds, respectively. The breeds were predefined as Awassi and three exotic breeds: Chios, Assaf, and improved Awassi sheep. The results indicated a significant relationship of the 21 and 16 studied traits in assigning and discriminating individual's sheep into their correct breed. The analysis revealed the clustering of the three strains of Awassi sheep in Jordan as the Baladi, the Naemi, and the Saqri. The genetic distances have also confirmed the findings. However, the potential of gene flow between Awassi strains and the exotic breed was reported. The phenotypic traits with discriminant power would be utilized in a guideline for sheep taxonomy in general and for Awassi sheep in particular.

Differentiation of intraspecific phenotypic plasticity of elongate glassy perchlet, Chanda nama: Insights into landmark-based truss morphometric and meristic variations

Objective:

Understanding intraspecific phenotypic plasticity is a prerequisite to fish stock identification and sustainable fisheries management. In this study, we assessed intraspecific phenotypic plasticity in terms of meristic and morphometric characters of wild populations of elongate glassy perchlet, Chanda nama from two different rivers, namely Madhumati River – Narail (MRN) and Tulshiganga River – Jaypurhat (TRJ), and an ox-bow lake, Jhapa Baor – Jashore (JBJ) in Bangladesh.

Materials and Methods:

In this study, six meristics, 15 conventional morphometrics, and 23-truss-based morphometrics were subjected to a one-way analysis of variance (ANOVA), followed by the Tukey-HSD test. The mean values of three meristic counts and nine conventional and 12 truss-based morphometrics demonstrated significant differences in the ANOVA test. Furthermore, principal component analysis (PCA) and discrimination function analysis (DFA) were performed separately using conventional and truss-based morphometric data.

Results:

In PCA analysis, four principal components were extracted and cumulatively demonstrated 51.848%. On the contrary, two discriminant functions (DF1, 63.5%; DF2, 36.5%) resulted from DFA analysis. In the bi-plot alignment from the discriminant space, all individuals were exceedingly separated among the three inhabitants. A dendrogram developed using conventional and truss morphometric characters confirmed that two clusters were formed among three populations. The TRJ population formed a distinct cluster, and the JBJ population formed a different cluster with a subcluster of MRN. In the discriminant function analysis, precise classification outcomes displayed 82% of individuals into their unique populations, whereas 66.9% of individuals were categorized as a cross-validated assemblage.

Conclusion:

The baseline information resulting from the current study would be useful for environmental studies and further conservation of glassy perchlet populations in Bangladesh.

Phenotypic characterization of Raya cattle in northern Ethiopia

Thirteen qualitative and six morphometric variables on a total of 651 adult cattle (76 oxen and 575 cows) from four purposively selected districts were recorded to characterize the cattle populations in and around the breeding tract of Raya cattle. General linear model, frequency, and multivariate analysis procedures of Statistical Analysis Software (SAS 9.0) were used to analyze the data by splitting and merging the sexes. Higher measurement values for oxen were recorded over the cows. Location affects the studied traits significantly. The cattle population from Habru district was significantly differentiated from Raya cattle. Among the districts of Raya cattle, lowest values for most of the linear measurements were observed in Kobo district. Majority of the Raya cattle possess upright, lyre-shaped horn, small, and erected hump placed at the cervical thoracic position, large dewlap, naval flap, and perpetual sheath sizes and dominantly dark red body color with uniform body color pattern. Stepwise discriminant function analysis reveals horn length, ear length, and height at wither were the first three most important morphometric variables used in discriminating the cattle populations. Canonical discrimination analysis showed that the first canonical structure explains majority (94.13%) of the total variation with eigenvalue of 2.07 and canonical correlation of 82.14%. Discriminant function analysis showed the classification of an average 61% of the studied animals into their respective districts. Pairwise Mahalanobis distances between populations from different districts were found to be highly significant. Habru cattle population relates distantly from Raya cattle except its short distance with Kobo district. The shortest distance was observed between Raya cattle of Alamata and Raya Azebo districts. In conclusion, cattle from Alamata, Raya Azebo, and Kobo districts can be categorized as Raya cattle, while strong similarities between the first two districts in showing the real characteristics and morphology of Raya cattle were also revealed.

Conchology Variations in Species Identification of Pachychilidae (Mollusca, Gastropoda, Cerithiodea) through Multivariate Analysis

Pachychilidae is one of the freshwater gastropod family which was previously known under the Potamididae and Thiaridae families. Studies on freshwater gastropods especially on conchcology examinantions are still inadequate compared to marine gastropods. Morphological and morphometric studies of gastropods are practically used to identify and differentiate between species and necessary to complement molecular studies due to its low cost and tolerable resolving power of discrimination. The aim of the current study is to provide information on morphological and morphometric characteristics of Pachychilidae in Bintulu, Sarawak stream. A total of 20 individuals from each species of Sulcospira testudinaria, Sulcospira schmidti, Brotia siamensis, and Tylomelania sp. from Pachychilidae familiy were collected at three different sites from a small stream within the Bintulu area. Fourteen measurement of shell morphometrics were converted into proportioned ratios and analysed for univariate and multivariate analysis. Three shell morphometric (Aperture width, AW; Whorl width, WW2; and, Interior anterior length, AINL) of Pachychilidae indicated significant differences (P < 0.05) between species. However, multivariate analysis revealed that these shell morphometrics are pre-eminent factors to discriminate genus Sulcospira, Brotia and Tylomelania, as well as between Sulcospira species. This current study also suggests that these three characteristics are unique to Sulcospira species due to strong distinction among species. Findings on these three characteristics are significant for Sulcospira spp. as this study is the first shell morphometric report on the Pachychilidae species in Sarawak.