A Comparison of Signals of Designated Medical Events and Non-designated Medical Events: Results from a Scoping Review

INTRODUCTION AND OBJECTIVE

The European Medicines Agency (EMA) maintains a list of designated medical events (DMEs), events that are inherently serious and are prioritized for signal detection, irrespective of statistical criteria. We have analysed the results of our previously published scoping review to determine whether DME signals differ from those of other adverse events in terms of time to communication and characteristics of supporting reports of suspected adverse drug reactions.

METHODS

For all signals, we obtained the launch year of medicinal products from textbooks or regulatory agencies, extracted the year of the first report in VigiBase and calculated the interval between the first report and communication (time to communication, TTC). We further retrieved the average completeness (via vigiGrade) of the reports in each case series in the years before the communication. We categorised as DME signals those concerning an event in the EMA's list. We described the two groups of signals using medians and interquartile ranges (IQR) and compared them using the Brunner-Munzel test, calculating 95% confidence intervals (95% CI) and P values.

RESULTS

Of 4520 signals, 919 concerned DMEs and 3601 concerned non-DMEs. Signals of DMEs were supported by a median of 15 reports (IQR 6-38 reports) with a completeness score of 0.52 (IQR 0.43-0.62) and signals of non-DMEs by 20 reports (IQR 6-84 reports) with a completeness score of 0.46 (IQR 0.38-0.56). The probability that a random DME signal was supported by fewer reports than non-DME signals was 0.56 (95% CI 0.54-0.58, P < 0.001) and that of one having lower average completeness was 0.39 (95% CI 0.36-0.41, P < 0.001). The median TTCs of DME and non-DME signals did not differ (10 years), but the TTC was as low as 2 years when signals (irrespective of classification) were supported by reports whose average completeness was > 0.80.

CONCLUSIONS

Signals of designated medical events were supported by fewer reports and higher completeness scores than signals of other adverse events. Although statistically significant, the differences in effect sizes between the two groups were small. This suggests that listing certain adverse events as DMEs is not having the expected effect of encouraging a focus on reports of the types of suspected adverse reactions that deserve special attention. Further enhancing the completeness of the reports of suspected adverse drug reactions supporting signals of designated medical events might shorten their time to communication and reduce the number of reports required to support them.

Expression of intestinal drug transporter proteins and metabolic enzymes in neonatal and pediatric patients

The development of pediatric oral drugs is hampered by a lack of predictive simulation tools. These tools, in turn, require data on the physiological variables that influence oral drug absorption, including the expression of drug transporter proteins (DTPs) and drug-metabolizing enzymes (DMEs) in the intestinal tract. The expression of hepatic DTPs and DMEs shows age-related changes, but there are few data on protein levels in the intestine of children. In this study, tissue was collected from different regions of the small and large intestine from neonates (i.e., surgically removed tissue) and from pediatric patients (i.e., gastroscopic duodenal biopsies). The protein expression of clinically relevant DTPs and DMEs was determined using a targeted mass spectrometry approach. The regional distribution of DTPs and DMEs was similar to adults. Most DTPs, with the exception of MRP3, MCT1, and OCT3, and all DMEs showed the highest protein expression in the proximal small intestine. Several proteins (i.e., P-gp, ASBT, CYP3A4, CYP3A5, CYP2C9, CYP2C19, and UGT1A1) showed an increase with age. Such increase appeared to be even more pronounced for DMEs. This exploratory study highlights the developmental changes in DTPs and DMEs in the intestinal tract of the pediatric population. Additional evaluation of protein function in this population would elucidate the implications of the presented changes in protein expression on absorption of orally administered drugs in neonates and pediatric patients.

Volatilization of dimethylsilanediol (DMSD) under environmentally relevant conditions: Sampling method and impact of water and soil materials

Dimethylsilanediol (DMSD) is the common breakdown product of methylsiloxanes such as polydimethylsiloxane (PDMS) and volatile methylsiloxanes (VMS) in soil. In this work, we first present a sorbent selection experiment aiming to identify a sorbent that can trap gas-phase DMSD without causing DMSD condensation and VMS hydrolysis at environmentally relevant humidities. With a proper sorbent (Tenax) identified, the volatilization of DMSD from water and various wet soil and soil materials were measured in a controlled environment. It was demonstrated that DMSD underwent volatilization after soil water was completely evaporated. Various types of soil constituents show drastic differences in preventing DMSD from volatilization. Analysis of the sorbent-captured products provides further insight, most notably that virtually no cyclic methylsiloxanes are formed during the volatilization of DMSD from water or soil materials, except in one extreme case where only traces are detected.

Accurate pH Monitoring of Highly Concentrated Saline Aqueous Solutions (Seawater-like) with a pH Colorimetric Sensor Array

A pH colorimetric sensor array (CSA) was prepared on a nitrocellulose membrane and used for accurate pH measurement in highly concentrated saline solutions. The CSAs consisted of sensing spots made of a suitable OrMoSil polymer prepared from organo-fluorinated-silane precursors and/or organosilane with tetraethyl orthosilicate hosting an acid-base indicator. Four CSAs were prepared: D, 1F, 2F, and 3F. In D, a nonfluorinated organosilane was present. From 1F to 3F, the concentration of the fluorinated organosilane increased and improved the pH measurement accuracy in highly saline concentrations. No recalibrations were required, and the analytical signal was stable in time. D, 1F, 2F, and 3F were deposited in triplicate, and they were prepared to work in the seawater pH interval (7.50-8.50). The use of fluorinated precursors led to a lower pH prediction error and tailored the interval of the CSA at more basic pH values so that the inflection points of the sigmoidal calibrations of D, 1F, 2F, and 3F moved from 6.97 to 7.98. The overall pH prediction error was 0.10 pH (1F), 0.02 pH (2F), and 0.04 pH units (3F). The CSAs were stable, reversible, reusable, and independent of salinity (S) between 20 and 40. The performances of the CSA were compared with those of a glass electrode, whose pHNIST values were converted in the pHSWS scale through a conversion equation. Being unaffected by the typical drawback of the glass electrode, the CSAs can be used directly in seawater real samples, and it validated the proposed conversion equation.

Alcohol-free synthesis, biological assessment, in vivo toxicological evaluation, and in silico analysis of novel silane quaternary ammonium compounds differing in structure and chain length as promising disinfectants

Quaternary ammonium compounds (QACs) are commonly used as disinfectants for industrial, medical, and residential applications. However, adverse health outcomes have been reported. Therefore, biocompatible disinfectants must be developed to reduce these adverse effects. In this context, QACs with various alkyl chain lengths (C12-C18) were synthesized by reacting QACs with the counterion silane. The antimicrobial activities of the novel compounds against four strains of microorganisms were assessed. Several in vivo assays were conducted on Drosophila melanogaster to determine the toxicological outcomes of Si-QACs, followed by computational analyses (molecular docking, simulation, and prediction of skin sensitization). The in vivo results were combined using a cheminformatics approach to understand the descriptors responsible for the safety of Si-QAC. Si-QAC-2 was active against all tested bacteria, with minimal inhibitory concentrations ranging from 13.65 to 436.74 ppm. Drosophila exposed to Si-QAC-2 have moderate-to-low toxicological outcomes. The molecular weight, hydrophobicity/lipophilicity, and electron diffraction properties were identified as crucial descriptors for ensuring the safety of the Si-QACs. Furthermore, Si-QAC-2 exhibited good stability and notable antiviral potential with no signs of skin sensitization. Overall, Si-QAC-2 (C14) has the potential to be a novel disinfectant.

In vitro and in vivo toxicity of thiolated and PEGylated organosilica nanoparticles

This study comprises the comprehensive toxicological assessment of thiolated organosilica nanoparticles (NPs) synthesised from 3-mercaptopropyltrimethoxysilane (MPTS). We investigated the influence of three different types of nanoparticles synthesised from 3-mercaptopropyltrimethoxysilane: the starting thiolated silica (Si-NP-SH) and their derivatives prepared by surface PEGylation with PEG 750 (Si-NP-PEG750) and 5000 Da (Si-NP-PEG5000) on biological subjects from in vitro to in vivo experiments to explore the possible applications of those nanoparticles in biomedical research. As a result of this study, we generated a comprehensive understanding of the toxicological properties of these nanoparticles, including their cytotoxicity in different cell lines, hemolytic properties, in vitro localisation, mucosal irritation properties and biodistribution in BALB/c mice. Our findings indicate that all three types of nanoparticles can be considered safe and have promising prospects for use in biomedical applications. Nanoparticles did not affect the viability of HPF, MCF7, HEK293 and A549 cell lines at low concentrations (up to 100 µg/mL); moreover, they did not cause organ damage to BALB/c mice at concentrations of 10 mg/kg. The outcomes of this study enhance our understanding of the impact of organosilica nanoparticles on health and the environment, which is vital for developing silica nanoparticle-based drug delivery systems and provides opportunities to expand the applications of organosilica nanoparticles.

Fate of dimethylsilanediol (DMSD) in soil-plant systems

Dimethylsilanediol (DMSD) is the degradation product of methylsiloxane polymers and oligomers such as volatile cyclic methylsiloxanes (cVMS). To better understand the environmental fate of this key degradation product, we conducted a three-part study on the movement of DMSD in soil. The objective of this third and final study was to determine the fate of DMSD in soil-plant systems under constant irrigation. Soil columns were constructed using two soils with the upper 20 cm layers spiked with 14C-labeled DMSD. Corn seedlings were transplanted into the soil columns and placed in a field plot underneath a transparent cover that prevented rainwater from reaching the soil columns while allowing soil water to be volatilized freely. The soil-plant columns were regularly irrigated with known amounts of DMSD-free plant growth solution to sustain the plant growth. At pre-determined time intervals (15-67 days), the plant and soil columns were sectioned and the distribution of 14Corganosilicon species in the soil profile and plant parts was determined using a combination of Liquid Scintillation Counting and High-Performance Liquid Chromatography-Flow Scintillation Analysis, while soil water loss was determined gravimetrically. It was found that the majority (>92 %) of DMSD initially spiked into the soil was removed from the soil-plant systems. Although DMSD was transported from the soil to the plant, it was subsequently volatilized from the plant via transpiration, with only a small fraction (∼5%) remaining at the conclusion of the experiments. In addition, little non-extractable DMSD was found in the top layer of soil in the soil-plant systems, suggesting that the air-drying of soil is a necessary pre-condition for the formation of such non-extractable silanol residue on topsoil.

Fate of dimethylsilanediol (DMSD) in outdoor bare surface soil and its relation to soil water loss

Dimethylsilanediol (DMSD) is a primary degradation product of silicone materials in the environment. Due to its low air/water partition coefficient and low soil/water distribution coefficient, this compound is not expected to undergo sorption and volatilization in wet soil. In an accompanying paper, we confirm that under controlled indoor conditions in test tubes, there is little to no volatilization of DMSD from soil and soil constituents if soil is wet. However, a significant amount of DMSD was volatilized when the soil substrates became air dried. Given the importance of water on the partition and fate of DMSD, we now report a continuation of this study focusing on the relation between DMSD removal and water loss in re-constituted soil columns under outdoor conditions. Consistent with predictions based on its partition properties and reconciling this evidence with previously reported field and laboratory studies, DMSD distribution was found to be largely dependent on water partitioning. The results suggested that DMSD moved upward in soil profile as soil water was evaporated from topmost layers with little DMSD retention by the soil matrix. As soil dried, a fraction of DMSD was sorbed by the soil matrix in the topmost layer, while most of the spiked radio-labeled DMSD was removed from soil through volatilization.

Biosensor for ATP detection via aptamer-modified PDA@POSS nanoparticles synthesized in a microfluidic reactor

This study introduces aptamer-functionalized polyhedral oligomeric silsesquioxane (POSS) nanoparticles for adenosine triphosphate (ATP) detection where the POSS nanoparticles were synthesized in a one-step, continuous flow microfluidic reactor utilizing thermal polymerization. A microemulsion containing POSS monomers was generated in the microfluidic reactor which was designed to prevent clogging by using a continuous oil flow around the emulsion during thermal polymerization. Surfaces of POSS nanoparticles were biomimetically modified by polydopamine. The aptamer sequence for ATP was successfully attached to POSS nanoparticles. The aptamer-modified POSS nanoparticles were tested for affinity-based biosensor applications using ATP as a model molecule. The nanoparticles were able to capture ATP molecules successfully with an affinity constant of 46.5 [Formula: see text]M. Based on this result, it was shown, for the first time, that microfluidic synthesis of POSS nanoparticles can be utilized in designing aptamer-functionalized nanosystems for biosensor applications. The integration of POSS in biosensing technologies not only exemplifies the versatility and efficacy of these nanoparticles but also marks a significant contribution to the field of biorecognition and sample preparation.

Complementarity of two proteomic data analysis tools in the identification of drug-metabolising enzymes and transporters in human liver

Several software packages are available for the analysis of proteomic LC-MS/MS data, including commercial (e.g. Mascot/Progenesis LC-MS) and open access software (e.g. MaxQuant). In this study, Progenesis and MaxQuant were used to analyse the same data set from human liver microsomes (n = 23). Comparison focussed on the total number of peptides and proteins identified by the two packages. For the peptides exclusively identified by each software package, distribution of peptide length, hydrophobicity, molecular weight, isoelectric point and score were compared. Using standard cut-off peptide scores, we found an average of only 65% overlap in detected peptides, with surprisingly little consistency in the characteristics of peptides exclusively detected by each package. Generally, MaxQuant detected more peptides than Progenesis, and the additional peptides were longer and had relatively lower scores. Progenesis-specific peptides tended to be more hydrophilic and basic relative to peptides detected only by MaxQuant. At the protein level, we focussed on drug-metabolising enzymes (DMEs) and transporters, by comparing the number of unique peptides detected by the two packages for these specific proteins of interest, and their abundance. The abundance of DMEs and SLC transporters showed good correlation between the two software tools, but ABC showed less consistency. In conclusion, in order to maximise the use of MS datasets, we recommend processing with more than one software package. Together, Progenesis and MaxQuant provided excellent coverage, with a core of common peptides identified in a very robust way.

Comparative Intra-Subject Analysis of Gene Expression and Protein Abundance of Major and Minor Drug Metabolizing Enzymes in Healthy Human Jejunum and Liver

First pass metabolism by phase I and phase II enzymes in the intestines and liver is a major determinant of the oral bioavailability of many drugs. Several studies analyzed expressions of major drug-metabolizing enzymes (DMEs), such as CYP3A4 and UGT1A1 in the human gut and liver. However, there is still a lack of knowledge regarding other DMEs (i.e., "minor" DMEs), although several clinically relevant drugs are affected by those enzymes. Moreover, there is very limited intra-subject data on hepatic and intestinal expression levels of minor DMEs. To fill this gap of knowledge, we analyzed gene expression (quantitative real-time polymerase chain reaction) and protein abundance (targeted proteomics) of 24 clinically relevant DMEs, that is, carboxylesterases (CES), UDP-glucuronosyltransferases (UGT), and cytochrome P450 (CYP)-enzymes. We performed our analysis using jejunum and liver tissue specimens from the same 11 healthy organ donors (8 men and 3 women, aged 19-60 years). Protein amounts of all investigated DMEs, with the exception of CYP4A11, were detected in human liver samples. CES2, CYP2C18, CYP3A4, and UGT2B17 protein abundance was similar or even higher in the jejunum, and all other DMEs were found in higher amounts in the liver. Significant correlations between gene expression and protein levels were observed only for 2 of 15 jejunal, but 13 of 23 hepatic DMEs. Intestinal and hepatic protein amounts only significantly correlated for CYP3A4 and UGT1A3. Our results demonstrated a notable variability between the individuals, which was even higher in the intestines than in the liver. Our intrasubject analysis of DMEs in the jejunum and liver from healthy donors, may be useful for physiologically-based pharmacokinetic-based modeling and prediction in order to improve efficacy and safety of oral drug therapy.

Electrical stimulation promoting the angiogenesis in diabetic rat perforator flap through attenuating oxidative stress-mediated inflammation and apoptosis

Background

Skin flap transplantation is one of the effective methods to treat the diabetes-related foot ulceration, but the intrinsic damage to vessels in diabetes mellitus (DM) leads to the necrosis of skin flaps. Therefore, the discovery of a non-invasive and effective approach for promoting the survival of flaps is of the utmost importance. Electrical stimulation (ES) promotes angiogenesis and increases the proliferation, migration, and elongation of endothelial cells, thus being a potential effective method to improve flap survival.

Objective

The purpose of this study was to elucidate the mechanism used by ES to effectively restore the impaired function of endothelial cells caused by diabetes.

Methods

A total of 79 adult male Sprague-Dawley rats were used in this study. Gene and protein expression was assessed by PCR and western blotting, respectively. Immunohistochemistry and hematoxylin-eosin staining were performed to evaluate the morphology and density of the microvessels in the flap.

Results

The optimal duration for preconditioning the flap with ES was 7 days. The flap survival area percentage and microvessels density in the DMES group were markedly increased compared to the DM group. VEGF, MMP2, and MMP9 protein expression was significantly upregulated. ROS intensity was significantly decreased and GSH concentration was increased. The expression of IL-1β, MCP‑1, cleaved caspase-3, and Bax were downregulated in the DMES group, while TGF-β expression was upregulated.

Conclusions

ES improves the angiogenesis in diabetic ischemic skin flaps by attenuating oxidative stress-mediated inflammation and apoptosis, eventually increasing their viability.

Dual effect of light and ultrasound for efficient singlet oxygen generation with novel diaxial silicon phthalocyanine sensitizer

To treat a life-threatening disease like cancer, photodynamic therapy (PDT) and sonodynamic therapy (SDT) methods were combined into sono-photodynamic therapy (SPDT) as an effective therapeutic solution. Each day, the usage of phthalocyanine sensitizers increases in the therapeutic applications as they have the ability to produce more reactive oxygen species. In this context, a new diaxially silicon phthalocyanine sensitizer, containing triazole and tert-butyl groups, was synthesized. After elucidating the structure of the complex with elemental analysis, FT-IR, UV-Vis, MALDI-TOF MS and 1 H NMR, its photophysical, photochemical and sono-photochemical properties were examined. When singlet oxygen generation capacity of the new synthesized silicon phthalocyanine complex was determined and compared among photochemical (PDT; ФΔ  = 0.59 in DMSO, 0.44 in THF, 0.47 in toluene) and sonophotochemical (SPDT; ФΔ  = 0.88 in dimethyl sulfoxide (DMSO), 0.60 in tetrahydrofuran (THF), 0.65 in toluene) methods, it can be said that the complex is a successful sono-photosensitizer that can be used as a good SPDT agent in vitro or in vivo future studies.

Green Synthesis of Soluble Polysilsesquioxane with Phthalimide Groups

Soluble polysilsesquioxane containing side-chain phthalimide groups (PSQ-PhI) was synthesized via a solvent- and catalyst-free hydrolytic polycondensation reaction using 2-[3-(triethoxysilyl)propyl]-1H-isoindole-1,3(2H)-dione. The composition and structure of polysilsesquioxane was confirmed via 1H, 13C, and 29Si NMR spectroscopy, Fourier transform infrared spectroscopy, gel permeation chromatography, thermogravimetric analysis, dynamic light scattering, X-ray diffraction analysis, and elemental analysis. The synthesized silsesquioxane showed a monomodal molecular weight distribution. The average molecular weight of polysilsesquioxane is 11,200 Da, and the polydispersity index is 1.10. 29Si NMR analysis showed a half-peak width w1/2 3.1 ppm at δ -68.3, which corresponds to the PhI(CH2)3SiO3/2 unit and indicates an ordered structure in the polymer, with some defects caused by the presence of uncondensed silanol groups. PSQ-PhI showed good thermal stability (Td5% decomposition at 345 °C). The polysilsesquioxane-based coating was transparent in the visible region.

Suppression of pyrite oxidation by co-depositing bio-inspired PropS-SH-tannic acid coatings for the source control acid mine drainage

In previous works, both tannic acid (TA) and organosilane-based passivators have been proven to possess good inhibition effects on pyrite oxidation, which could effectively prevent acid mine drainage (AMD) generation at the source. However, the hydrophilicity of TA passivation film and the complex coating process of organosilane-based passivators (high temperature conditions were required during the process carried out) may limit their further practical use. Therefore, to achieve the purpose of better coating treatment of pyrite under mild conditions, TA and γ-mercaptopropyltrimethoxysilane (PropS-SH) were introduced to synergistically passivate pyrite in this work. Electrochemistry tests and chemical leaching experiments both confirmed that PropS-SH-TA coated pyrite had better oxidation resistance than raw pyrite and single PropS-SH or TA coated pyrite. Additionally, the analyses of scanning electron microscopy (SEM) measurements and static water contact angle tests demonstrated that a scaly coating was formed on PropS-SH-TA coated pyrite surface, which may be the reason for the significant improvement of its surface hydrophobicity. Finally, the study on the film-forming mechanism of PropS-SH-TA composite passivator displayed that the benzoquinone derivatives formed by TA could copolymerize with PropS-SH through Michael addition or Schiff base reaction, which constructed a dense hydrophobic film on pyrite surface. The newly formed composite film could provide a better oxidation barrier for pyrite based on TA passivation film.

Detection of 2,4-dichlorophenoxyacetic acid in water sample by organosilane based silica nanocomposites

The present study aims to produce nanocomposites of silica based organosilane as sensitive and selective fluorescent sensor for the recognition of 2,4 dichlorophenoxyacetic acid (2,4-D). Hydrazone tethered triazole functionalized organosilane has been synthesized by the condensation reaction of 4-hydroxybenzaldehyde and phenyl hydrazine followed by Cu(I) catalysed cycloaddition of azide with alkyne. The prepared compound has been further grafted over silica surface and the synthesized materials were characterized by FT-IR, NMR (¹H and ¹³C), XRD, mass spectrometry and FE-SEM spectral analyses. The prepared organosilane and its HSNPs have been utilized as an effective emission probe for the selective detection of 2,4 D with good linear relationship in the range of 0-160 μM and 0-115 μM and LOD value of 46 nM and 13.5 nM respectively. In the presence of other active species, the sensor shows minimal interference while the comparison with the previously reported techniques suggests it to be more desirable for the sensitive and selective detection of 2,4 D. Further, the real sample application for detection of 2,4 D was analyzed in field water and the HSNPs based sensing system gave recovery percentage of above 98 %.

Plant uptake potential and soil persistence of volatile methylsiloxanes in sewage sludge amended soils

Volatile methylsiloxanes (VMSs) are organosilicon compounds, ubiquitous in modern life. Due to their high use in consumer products, large amounts of these compounds are released into sewer systems, reaching wastewater treatment plants (WWTPs). Its frequent detection in sewage sludge can be of concern when considering its land application, not only due to potential negative impacts on the environment, but also on human health. In this work, the effects of sewage sludge application on plant development and crop productivity were studied, as well as VMSs persistence in the soil and their plant uptake. This study focused on 7 VMSs (D3, D4, D5, D6, L3, L4 and L5) and consisted of a 12-week greenhouse pot experiment, where sewage sludge-amended soils were used to cultivate Pisum sativum (peas). Sewage sludge application to soils had no negative effects on plant development and was tied to crop productivity improvements. Most of the VMSs were still present in soils at the end of the experiment and plant uptake and translocation of the 4 cyclic VMSs (D3, D4, D5, D6) occurred. VMSs were detected in plant tissues up to 161 ± 27 ng g^-1 dw (samples of stems, leaves and tendrils), but did not exceed 50 ± 19 ng g^-1 dw in peas, which did not translate into a human exposure risk due to ingestion, according to an intake risk assessment. However, soil risk assessments showed that for L5 the hazardous ratios were higher than the threshold value of 1. This means a potential environmental risk despite the low levels of this compound in soils (up to 7.3 ± 0.7 ng g^-1 dw). Considering these results, sewage sludge monitoring plans should be defined for VMSs, namely when its final destination is land application, thus allowing a safer management of this residue, taking advantage of its valorization potential.

Volatile Methyl Siloxanes and Other Organosilicon Compounds in Residential Air

Volatile methyl siloxanes (VMS) are ubiquitous in indoor environments due to their use in personal care products. This paper builds on previous work identifying sources of VMS by synthesizing time-resolved proton-transfer reaction time-of-flight mass spectrometer VMS concentration measurements from four multiweek indoor air campaigns to elucidate emission sources and removal processes. Temporal patterns of VMS emissions display both continuous and episodic behavior, with the relative importance varying among species. We find that the cyclic siloxane D5 is consistently the most abundant VMS species, mainly attributable to personal care product use. Two other cyclic siloxanes, D3 and D4, are emitted from oven and personal care product use, with continuous sources also apparent. Two linear siloxanes, L4 and L5, are also emitted from personal care product use, with apparent additional continuous sources. We report measurements for three other organosilicon compounds found in personal care products. The primary air removal pathway of the species examined in this paper is ventilation to the outdoors, which has implications for atmospheric chemistry. The net removal rate is slower for linear siloxanes, which persist for days indoors after episodic release events. This work highlights the diversity in sources of organosilicon species and their persistence indoors.

A new organosilane passivation agent prepared at ambient temperatures to inhibit pyrite oxidation for acid mine drainage control

Acid mine drainage (AMD) is a significant environmental problem caused by the oxidation of pyrite and other metal sulfide ores. Organosilane passivation is an effective strategy to inhibit pyrite oxidation. However, synthetic organic silane passivation agents generally require temperatures of 50-80 °C, resulting in high energy consumption and high synthesis cost. In this study, a 3-aminopropyltrimethoxysilane -methyltrimethoxysilane (APS-MTMS) coatings was successfully prepared at ambient temperatures of 15-40 °C as a passivation agent to inhibit pyrite oxidation. Chemical leaching tests were used to study the inhibition performance of APS-MTMS for pyrite oxidation. The experimental results showed that the release of the total Fe from APS-MTMS-coated pyrite was 11.31 mg/L after chemical oxidation for 7 hours, and the passivation rate can reach 77.78%. The contact angle of the APS-MTMS-coated pyrite was significantly larger (140.4°) than that of the bare pyrite (58.8°), indicating that APS-MTMS prompted the formation of a superhydrophobic surface of pyrite, improving the oxidation resistance. Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) were applied to probe the interaction mechanism of APS-MTMS with pyrite. The results indicated that APS accelerated the Si-O-Si formation by amino protonation and enriched a crosslinked network of Si-O-Si and Fe-O-Si on the pyrite surface to prevent pyrite oxidation. This study provides a novel method for preparing organosilane passivation materials at ambient temperatures for AMD control.

Barium Titanate Functionalization with Organosilanes: Effect on Particle Compatibility and Permittivity in Nanocomposites

Barium titanate (BT) recently gained new interest in the preparation of dielectric and piezoelectric lead-free materials for applications in sensors, electronics, energy harvesting and storage fields. Barium titanate nanocomposites can achieve attractive performance, provided that the compatibility between ceramic particles and polymeric matrices is enhanced to the benefit of the physical properties of the final composite. Tuning the particle-matrix interface through particle functionalization represents a viable solution. In this work, surface functionalization of BT nanoparticles (NPs), obtained by hydrothermal synthesis, with 3-glycidyloxypropyltrimethoxysilane, 2-[(acetoxy(polyethyleneoxy)propyl]triethoxysilane and triethoxysilylpropoxy(polyethyleneoxy)dodecanoate, was performed after optimizing the hydroxylation process of the NPs to improve their surface reactivity and increase the yield of grafting. Solid-state nuclear magnetic resonance and thermogravimetric analysis were used to quantify the molecules grafted onto the ceramic nanoparticles. Both bare and functionalized particles were employed in the realization of epoxy- and polydimethylsiloxane (PDMS)-based nanocomposites. Functionalization was proven to be beneficial for particle dispersibility and effective for particle alignment in the PDMS matrix. Moreover, the dielectric constant measurements revealed the potential of PDMS-based nanocomposites for applications in the field of dielectric elastomers.

Surface Treatment With Hydrophobic Coating Reagents (Organosilanes) Strongly Reduces the Bioactivity of Synthetic Amorphous Silica in vitro

Synthetic amorphous silica (SAS) is industrially relevant material whose bioactivity in vitro is strongly diminished, for example, by protein binding to the particle surface. Here, we investigated the in vitro bioactivity of fourteen SAS (pyrogenic, precipitated, or colloidal), nine of which were surface-treated with organosilanes, using alveolar macrophages as a highly sensitive test system. Dispersion of the hydrophobic SAS required pre-wetting with ethanol and extensive ultrasonic treatment in the presence of 0.05% BSA (Protocol 1). Hydrophilic SAS was suspended by moderate ultrasonic treatment (Protocol 2) and also by Protocol 1. The suspensions were administered to NR8383 alveolar macrophages under serum-free conditions for 16 h, and the release of LDH, GLU, H2O2, and TNFα was measured in cell culture supernatants. While seven surface-treated hydrophobic SAS exhibited virtually no bioactivity, two materials (AEROSIL® R 504 and AEROSIL® R 816) had minimal effects on NR8383 cells. In contrast, non-treated SAS elicited considerable increases in LDH, GLU, and TNFα, while the release of H2O2 was low except for CAB-O-SIL® S17D Fumed Silica. Dispersing hydrophilic SAS with Protocol 1 gradually reduced the bioactivity but did not abolish it. The results show that hydrophobic coating reagents, which bind covalently to the SAS surface, abrogate the bioactivity of SAS even under serum-free in vitro conditions. The results may have implications for the hazard assessment of hydrophobic surface-treated SAS in the lung.

Method for rapid biofilm cultivation on microplastics and investigation of its effect on the agglomeration and removal of microplastics using organosilanes

Since microplastics were recognized as a global environmental problem in the early 2000s, research began on possible solutions such as the removal of microplastics from waters. A novel and promising approach for this purpose is microplastics agglomeration-fixation using organosilanes. In this study, it is investigated how biofilm coverage of microplastics affects this process. The biofilm was grown on the microplastics by cultivating it for one week in a packed bed column operated with biologically treated municipal wastewater enriched with glucose. The biofilm was characterized using confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and Fourier-Transform infrared spectroscopy (FT-IR). The results show a partial coverage of the microplastics with attached bacteria and extracellular polymeric substances (EPS) after 7 days of incubation. Comparing five polymer types (polyethylene, polypropylene, polyamide, polyester, and polyvinyl chloride) and three organosilanes, the biofilm coverage caused a reduced removal efficiency for all combinations tested as it changes the surface chemistry of the microplastics and therefore the interaction with the organosilanes tested in this study. Treatment of biofilm covered microplastic with ultrasound partly recovers the removal. However, the results underline the importance of simulated environmental exposure when performing experiments for microplastic removal.

Enhanced water flux and bacterial resistance in cellulose acetate membranes with quaternary ammoniumpropylated polysilsesquioxane

An enhanced water flux and anti-fouling nanocomposite ultrafiltration membrane based on quaternary ammoniumpropylated polysilsesquioxane (QAPS)/cellulose acetate (QAPS@CA) was fabricated by in situ sol-gel processing via phase inversion followed by quaternization with methyl iodide (CH₃I). Membrane characterizations were performed based on the contact angle, FTIR, SEM, and TGA properties. Membrane separation performance was assessed in terms of pure water flux, rejection, and fouling resistance. The 7%QAPS@CA nanocomposite membrane showed an increased wettability (46.6° water contact angle), water uptake (113%) and a high pure water permeability of ∼370 L m^-2 h^-1 bar^-1. Furthermore, the 7%QAPS@CA nanocomposite membrane exhibited excellent bactericidal properties (∼97.5% growth inhibition) against Escherichia coli (E. coli) compared to the bare CA membrane (0% growth inhibition). The 7%QAPS@CA nanocomposite membrane can be recommended for water treatment and biomedical applications.

High-efficiency adsorption of phenanthrene by Fe3O4-SiO2-dimethoxydiphenylsilane nanocomposite: Experimental and theoretical study

Phenanthrene (PHE), as one of representative polycyclic aromatic hydrocarbons (PAHs) can cause serious adverse effects on human health, developing effective adsorbents to alleviate PHE contamination is in urgent demand. A novel Fe₃O₄-SiO₂-Dimethoxydiphenylsilane (Fe₃O₄-SiO₂-2DMDPS) nanocomposite was fabricated from encapsulation and grafting process. Magnetic Fe₃O₄ nanoparticles were served as preliminary matrix material, SiO₂ was used to link the magnetic oxide and provide hydroxyl groups for proceeding the silane coupling reaction subsequently, and the aromatic rings in DMDPS could provide active sites for PHE adsorption via π-π interaction. SEM-EDS, TEM, BET, VSM, XRD, FTIR, Raman, Zeta potential, and XPS techniques were used to characterize magnetic nanocomposite. The prepared Fe₃O₄-SiO₂-2DMDPS exhibited an excellent adsorption performance towards PHE, it could maintain 75.97% adsorption capacity after four regeneration cycles. Homogeneous adsorption acted crucial role in the whole adsorption process and film diffusion was the rate-controlling procedure. Theoretical calculations put forward the most favorable bonding modes between Fe₃O₄-SiO₂-2DMDPS and PHE molecules, confirmed the π-π interaction was valid and it usually existed in the form of parallel-displaced. This work might aid us to develop effective modification strategy for Fe₃O₄ nanoparticles and expand its application in the PAHs removing field.

Durable hydrophobic Enteromorpha design for controlling oil spills in marine environment prepared by organosilane modification for efficient oil-water separation

Hydrophobic and oleophilic materials are attractive candidates for efficient oil collection due to their excellent oil-water separation. However, the most of currently reported oil adsorption materials are limited resources or require complicated preparation steps, which causes high energy consumption and not be practical for large-scale application. Herein, we report a facile strategy to modify the wettability of Enteromorpha from hydrophilic to hydrophobic, which not only greatly reduces energy consumption but also shows the outstanding capacity for oil-water separation with the maximum adsorption capacities is 11.4 g/g and the contact angle reaches 137°. The successful modification of the Enteromorpha is achieved by grafting n-octyltriethoxysilane on the surface of the pristine Enteromorpha. The hydrophobic and superoleophilic Enteromorpha guarantee adequate voids in the fibrous bundles only for oil adsorption and the oil floating on the seawater is removed by the formation of hydrogen bonding between oil and modified Enteromorpha. By optimizing test, the optimal adsorption conditions are adsorption time of 60 min, oil-water ratio of 1:10 and pH of 7. Our reported hydrophobic organosilane modified Enteromorpha will open a new avenue to control marine oil pollution and suppress the damage of Enteromorpha to the marine ecology system.