Probabilistic modeling of aggregate lead exposure in children of urban China using an adapted IEUBK model

Lead, a ubiquitous pollutant throughout the environment, is confirmed to be neurotoxic for children by pulmonary and oral routes. As preschool children in China continue to be exposed to lead, we analyzed the available biomonitoring data for preschool children in urban China collected in the period 2004-2014 through a literature review. To identify apportionment of lead exposure sources for urban children in China, we modified the IEUBK model with a Monte Carlo module to assess the uncertainty and variability of the model output based on limited available exposure data and compared the simulated blood lead levels with the observed ones obtained through literature review. Although children's blood lead levels in urban China decreased statistically over time for the included studies, changes in blood lead levels in three economic zones and seven age groups except for two age-specific groups were no longer significant. The GM-predicted BLLs and the GM-observed BLLs agreed within 1μg/dL for all fourteen cities. The 95% CIs for the predicted GMs and the observed distribution (GM±GSD) overlapped substantially. These results demonstrated the plausibility of blood lead prediction provided by the adapted IEUBK model. Lead exposure estimates for diet, soil/dust, air, and drinking water were 12.01±6.27μg/day, 2.69±0.89μg/day, 0.20±0.15μg/day, and 0.029±0.012μg/day, respectively. These findings showed that the reduction of lead concentrations in grains and vegetables would be beneficial to limit the risk of dietary lead exposure for a large proportion of preschool children in urban China.

Improving optimization efficiency for the total pollutant load allocation in large two-dimensional water areas: Bohai Sea (China) case study

The total pollutant load allocation (TPLA) can be transformed into an optimization problem with regards to water quality constraints. The optimization calculation may become very time consuming when the number of water quality constraint equations is great. A Trial and Error Method (TEM) to remove the redundant points was first introduced through iterative calculations under structure and non-structure model grids. The TEM was applied for the TPLA in the Bohai Sea in China. The calculation time was reduced to about 2min under the condition that 103,433 model grids met the water quality standards. In the best case, the optimization efficiency was improved by 98.9%. The allocation results showed that approximately 90% of total nitrogen (TN) load should be reduced in the 56 pollution sources around the Bohai Sea; of these values, roughly 85% of the reduction could come from 10 pollution sources.

Comparison of international approaches to sustainable remediation

Since mid-to-late 2000s growing interest for sustainable remediation has emerged in initiatives from several international and national organisations as well as other initiatives from networks and forums. This reflects a realisation that risk-management activities can about bring environmental, social, and economic impacts (positive or negative) in addition to achieving risk-based remediation goals. These ideas have begun to develop as a new discipline of "sustainable remediation". The various initiatives have now published a number of frameworks, standards, white papers, road maps and operative guidelines. The similarities and differences in the approaches by these outputs and general trends have been identified. The comparison is based on a set of criteria developed in discussion with members of these various initiatives, and identifies a range of similarities between their publications. Overall the comparison demonstrates a high level of consensus across definitions and principles, which leads to the conclusion that there is a shared understanding of what sustainable remediation is both across countries and stakeholder groups. Publications do differ in points of detail, in particular about the operational aspects of sustainable remediation assessment. These differences likely result from differences in context and legal framework. As this analysis was carried out its findings were debated with members of the various international initiatives, many of whom have been included as authors. Hence the outcomes described in this paper can be seen as the result of a sort of multi-level debate among international experts (authors) and so can offer a starting point to new sustainable remediation initiatives (for example in other countries) that aim to start developing their own documents.

Targeted selection of brownfields from portfolios for sustainable regeneration: User experiences from five cases testing the Timbre Brownfield Prioritization Tool

Prioritizing brownfields for redevelopment in real estate portfolios can contribute to more sustainable regeneration and land management. Owners of large real estate and brownfield portfolios are challenged to allocate their limited resources to the development of the most critical or promising sites, in terms of time and cost efficiency. Authorities worried about the negative impacts of brownfields - in particular in the case of potential contamination - on the environment and society also need to prioritize their resources to those brownfields that most urgently deserve attention and intervention. Yet, numerous factors have to be considered for prioritizing actions, in particular when adhering to sustainability principles. Several multiple-criteria decision analysis (MCDA) approaches and tools have been suggested in order to support these actors in managing their brownfield portfolios. Based on lessons learned from the literature on success factors, sustainability assessment and MCDA approaches, researchers from a recent EU project have developed the web-based Timbre Brownfield Prioritization Tool (TBPT). It facilitates assessment and prioritization of a portfolio of sites on the basis of the probability of successful and sustainable regeneration or according to individually specified objectives. This paper introduces the challenges of brownfield portfolio management in general and reports about the application of the TBPT in five cases: practical test-uses by two large institutional land owners from Germany, a local and a regional administrative body from the Czech Republic, and an expert from a national environmental authority from Romania. Based on literature requirements for sustainability assessment tools and on the end-users' feedbacks from the practical tests, we discuss the TBPT's strengths and weaknesses in order to inform and give recommendations for future development of prioritization tools.

Modelling ecological and human exposure to POPs in Venice lagoon - Part II: Quantitative uncertainty and sensitivity analysis in coupled exposure models

The study is focused on applying uncertainty and sensitivity analysis to support the application and evaluation of large exposure models where a significant number of parameters and complex exposure scenarios might be involved. The recently developed MERLIN-Expo exposure modelling tool was applied to probabilistically assess the ecological and human exposure to PCB 126 and 2,3,7,8-TCDD in the Venice lagoon (Italy). The 'Phytoplankton', 'Aquatic Invertebrate', 'Fish', 'Human intake' and PBPK models available in MERLIN-Expo library were integrated to create a specific food web to dynamically simulate bioaccumulation in various aquatic species and in the human body over individual lifetimes from 1932 until 1998. MERLIN-Expo is a high tier exposure modelling tool allowing propagation of uncertainty on the model predictions through Monte Carlo simulation. Uncertainty in model output can be further apportioned between parameters by applying built-in sensitivity analysis tools. In this study, uncertainty has been extensively addressed in the distribution functions to describe the data input and the effect on model results by applying sensitivity analysis techniques (screening Morris method, regression analysis, and variance-based method EFAST). In the exposure scenario developed for the Lagoon of Venice, the concentrations of 2,3,7,8-TCDD and PCB 126 in human blood turned out to be mainly influenced by a combination of parameters (half-lives of the chemicals, body weight variability, lipid fraction, food assimilation efficiency), physiological processes (uptake/elimination rates), environmental exposure concentrations (sediment, water, food) and eating behaviours (amount of food eaten). In conclusion, this case study demonstrated feasibility of MERLIN-Expo to be successfully employed in integrated, high tier exposure assessment.

Modelling the exposure to chemicals for risk assessment: a comprehensive library of multimedia and PBPK models for integration, prediction, uncertainty and sensitivity analysis - the MERLIN-Expo tool

MERLIN-Expo is a library of models that was developed in the frame of the FP7 EU project 4FUN in order to provide an integrated assessment tool for state-of-the-art exposure assessment for environment, biota and humans, allowing the detection of scientific uncertainties at each step of the exposure process. This paper describes the main features of the MERLIN-Expo tool. The main challenges in exposure modelling that MERLIN-Expo has tackled are: (i) the integration of multimedia (MM) models simulating the fate of chemicals in environmental media, and of physiologically based pharmacokinetic (PBPK) models simulating the fate of chemicals in human body. MERLIN-Expo thus allows the determination of internal effective chemical concentrations; (ii) the incorporation of a set of functionalities for uncertainty/sensitivity analysis, from screening to variance-based approaches. The availability of such tools for uncertainty and sensitivity analysis aimed to facilitate the incorporation of such issues in future decision making; (iii) the integration of human and wildlife biota targets with common fate modelling in the environment. MERLIN-Expo is composed of a library of fate models dedicated to non biological receptor media (surface waters, soils, outdoor air), biological media of concern for humans (several cultivated crops, mammals, milk, fish), as well as wildlife biota (primary producers in rivers, invertebrates, fish) and humans. These models can be linked together to create flexible scenarios relevant for both human and wildlife biota exposure. Standardized documentation for each model and training material were prepared to support an accurate use of the tool by end-users. One of the objectives of the 4FUN project was also to increase the confidence in the applicability of the MERLIN-Expo tool through targeted realistic case studies. In particular, we aimed at demonstrating the feasibility of building complex realistic exposure scenarios and the accuracy of the modelling predictions through a comparison with actual measurements.

A multi-disciplinary approach to evaluate pluvial floods risk under changing climate: The case study of the municipality of Venice (Italy)

Global climate change is likely to pose increasing threats in nearly all sectors and across all sub-regions worldwide (IPCC, 2014). Particularly, extreme weather events (e.g. heavy precipitations), together with changing exposure and vulnerability patterns, are expected to increase the damaging effect of storms, pluvial floods and coastal flooding. Developing climate and adaptation services for local planners and decision makers is becoming essential to transfer and communicate sound scientific knowledge about climate related risks and foster the development of national, regional and local adaptation strategies. In order to analyze the effect of climate change on pluvial flood risk and advice adaptation planning, a Regional Risk Assessment (RRA) methodology was developed and applied to the urban territory of the municipality of Venice. Based on the integrated analysis of hazard, exposure, vulnerability and risk, RRA allows identifying and prioritizing targets and sub-areas that are more likely to be affected by pluvial flood risk due to heavy precipitation events in the future scenario 2041-2050. From the early stages of its development and application, the RRA followed a bottom-up approach taking into account the requests, knowledge and perspectives of local stakeholders of the North Adriatic region by means of interactive workshops, surveys and discussions. Results of the analysis showed that all targets (i.e. residential, commercial-industrial areas and infrastructures) are vulnerable to pluvial floods due to the high impermeability and low slope of the topography. The spatial pattern of risk mostly reflects the distribution of the hazard and the districts with the higher percentage of receptors' surface in the higher risk classes (i.e. very high, high and medium) are Lido-Pellestrina and Marghera. The paper discusses how risk-based maps and statistics integrate scientific and local knowledge with the final aim to mainstream climate adaptation in the development of risk mitigation and urban plans.

Contamination and human health risk of lead in soils around lead/zinc smelting areas in China

Pb/Zn smelting, an important economic activity in China, has led to heavy environmental pollution. This research reviewed studies on soil Pb contamination at Pb/Zn smelting sites in China published during the period of 2000 to 2015 to clarify the total levels, spatial changes, and health risks for Pb contamination in soils at local and national scales. The results show that Pb contents in surface soils at 58 Pb/Zn smelting sites in China ranged from 7 to 312,452 mg kg(-1) with an arithmetic average, geometric average, and median of 1982, 404, and 428 mg kg(-1), respectively (n = 1011). Surface soil Pb content at these smelting sites decreased from an average of 2466 to 659 mg kg(-1), then to 463 mg kg(-1) as the distance from the smelters increased from <1000 to 1000∼2000 m, and then to >2000 m. With respect to variation with depth, the average soil Pb content at these sites gradually decreased from 986 mg kg(-1) at 0- to 20-cm depth to 144 mg kg(-1) at 80- to 100-cm depth. Approximately 78 % of the soil samples (n = 1011) at the 58 Pb/Zn smelting sites were classified as having high Pb pollution levels. Approximately 34.2 and 7.7 % of the soil samples (n = 1011) at the 58 Pb/Zn smelting sites might pose adverse health effects and high chronic risks to children, respectively. The Pb/Zn smelting sites in the southwest and southeast provinces of China, as well as Liaoning province, were most contaminated and thus should receive priority for remediation.

A review of multi-risk methodologies for natural hazards: Consequences and challenges for a climate change impact assessment

This paper presents a review of existing multi-risk assessment concepts and tools applied by organisations and projects providing the basis for the development of a multi-risk methodology in a climate change perspective. Relevant initiatives were developed for the assessment of multiple natural hazards (e.g. floods, storm surges, droughts) affecting the same area in a defined timeframe (e.g. year, season, decade). Major research efforts were focused on the identification and aggregation of multiple hazard types (e.g. independent, correlated, cascading hazards) by means of quantitative and semi-quantitative approaches. Moreover, several methodologies aim to assess the vulnerability of multiple targets to specific natural hazards by means of vulnerability functions and indicators at the regional and local scale. The overall results of the review show that multi-risk approaches do not consider the effects of climate change and mostly rely on the analysis of static vulnerability (i.e. no time-dependent vulnerabilities, no changes among exposed elements). A relevant challenge is therefore to develop comprehensive formal approaches for the assessment of different climate-induced hazards and risks, including dynamic exposure and vulnerability. This requires the selection and aggregation of suitable hazard and vulnerability metrics to make a synthesis of information about multiple climate impacts, the spatial analysis and ranking of risks, including their visualization and communication to end-users. To face these issues, climate impact assessors should develop cross-sectorial collaborations among different expertise (e.g. modellers, natural scientists, economists) integrating information on climate change scenarios with sectorial climate impact assessment, towards the development of a comprehensive multi-risk assessment process.

Climate change impacts on marine water quality: The case study of the Northern Adriatic sea

Climate change is posing additional pressures on coastal ecosystems due to variations in water biogeochemical and physico-chemical parameters (e.g., pH, salinity) leading to aquatic ecosystem degradation. With the main aim of analyzing the potential impacts of climate change on marine water quality, a Regional Risk Assessment methodology was developed and applied to coastal marine waters of the North Adriatic. It integrates the outputs of regional biogeochemical and physico-chemical models considering future climate change scenarios (i.e., years 2070 and 2100) with site-specific environmental and socio-economic indicators. Results showed that salinity and temperature will be the main drivers of changes, together with macronutrients, especially in the area of the Po' river delta. The final outputs are exposure, susceptibility and risk maps supporting the communication of the potential consequences of climate change on water quality to decision makers and stakeholders and provide a basis for the definition of adaptation and management strategies.

Timbre Brownfield Prioritization Tool to support effective brownfield regeneration

In the last decade, the regeneration of derelict or underused sites, fully or partly located in urban areas (or so called "brownfields"), has become more common, since free developable land (or so called "greenfields") has more and more become a scare and, hence, more expensive resource, especially in densely populated areas. Although the regeneration of brownfield sites can offer development potentials, the complexity of these sites requires considerable efforts to successfully complete their revitalization projects and the proper selection of promising sites is a pre-requisite to efficiently allocate the limited financial resources. The identification and analysis of success factors for brownfield sites regeneration can support investors and decision makers in selecting those sites which are the most advantageous for successful regeneration. The objective of this paper is to present the Timbre Brownfield Prioritization Tool (TBPT), developed as a web-based solution to assist stakeholders responsible for wider territories or clusters of brownfield sites (portfolios) to identify which brownfield sites should be preferably considered for redevelopment or further investigation. The prioritization approach is based on a set of success factors properly identified through a systematic stakeholder engagement procedure. Within the TBPT these success factors are integrated by means of a Multi Criteria Decision Analysis (MCDA) methodology, which includes stakeholders' requalification objectives and perspectives related to the brownfield regeneration process and takes into account the three pillars of sustainability (economic, social and environmental dimensions). The tool has been applied to the South Moravia case study (Czech Republic), considering two different requalification objectives identified by local stakeholders, namely the selection of suitable locations for the development of a shopping centre and a solar power plant, respectively. The application of the TBPT to the case study showed that it is flexible and easy to adapt to different local contexts, allowing the assessors to introduce locally relevant parameters identified according to their expertise and considering the availability of local data.

Regional Risk Assessment for climate change impacts on coastal aquifers

Coastal aquifers have been identified as particularly vulnerable to impacts on water quantity and quality due to the high density of socio-economic activities and human assets in coastal regions and to the projected rising sea levels, contributing to the process of saltwater intrusion. This paper proposes a Regional Risk Assessment (RRA) methodology integrated with a chain of numerical models to evaluate potential climate change-related impacts on coastal aquifers and linked natural and human systems (i.e., wells, river, agricultural areas, lakes, forests and semi-natural environments). The RRA methodology employs Multi Criteria Decision Analysis methods and Geographic Information Systems functionalities to integrate heterogeneous spatial data on hazard, susceptibility and risk for saltwater intrusion and groundwater level variation. The proposed approach was applied on the Esino River basin (Italy) using future climate hazard scenarios based on a chain of climate, hydrological, hydraulic and groundwater system models running at different spatial scales. Models were forced with the IPCC SRES A1B emission scenario for the period 2071-2100 over four seasons (i.e., winter, spring, summer and autumn). Results indicate that in future seasons, climate change will cause few impacts on the lower Esino River valley. Groundwater level decrease will have limited effects: agricultural areas, forests and semi-natural environments will be at risk only in a region close to the coastline which covers less than 5% of the total surface of the considered receptors; less than 3.5% of the wells will be exposed in the worst scenario. Saltwater intrusion impact in future scenarios will be restricted to a narrow region close to the coastline (only few hundred meters), and thus it is expected to have very limited effects on the Esino coastal aquifer with no consequences on the considered natural and human systems.

A Multi-Criteria Decision Analysis based methodology for quantitatively scoring the reliability and relevance of ecotoxicological data

Ecotoxicological data are highly important for risk assessment processes and are used for deriving environmental quality criteria, which are enacted for assuring the good quality of waters, soils or sediments and achieving desirable environmental quality objectives. Therefore, it is of significant importance the evaluation of the reliability of available data for analysing their possible use in the aforementioned processes. The thorough analysis of currently available frameworks for the assessment of ecotoxicological data has led to the identification of significant flaws but at the same time various opportunities for improvement. In this context, a new methodology, based on Multi-Criteria Decision Analysis (MCDA) techniques, has been developed with the aim of analysing the reliability and relevance of ecotoxicological data (which are produced through laboratory biotests for individual effects), in a transparent quantitative way, through the use of expert knowledge, multiple criteria and fuzzy logic. The proposed methodology can be used for the production of weighted Species Sensitivity Weighted Distributions (SSWD), as a component of the ecological risk assessment of chemicals in aquatic systems. The MCDA aggregation methodology is described in detail and demonstrated through examples in the article and the hierarchically structured framework that is used for the evaluation and classification of ecotoxicological data is shortly discussed. The methodology is demonstrated for the aquatic compartment but it can be easily tailored to other environmental compartments (soil, air, sediments).

Species sensitivity weighted distribution for ecological risk assessment of engineered nanomaterials: the n-TiO2 case study

Societal concerns about the environmental risks of engineered nanomaterials (ENMs) have recently increased, but nano-ecological risk assessments are constrained by significant gaps in basic information on long-term effects and exposures, for example. An approach to the ecological risk assessment of ENMs is proposed that can operate in the context of high uncertainty. This approach further develops species sensitivity weighted distribution (SSWD) by including 3 weighting criteria (species relevance, trophic level abundance, and nanotoxicity data quality) to address nano-specific needs (n-SSWD). The application of n-SSWD is illustrated for nanoscale titanium dioxide (n-TiO2 ), which is available in different crystal forms; it was selected because of its widespread use in consumer products (e.g., cosmetics) and the ample availability of data from ecotoxicological studies in the literature (including endpoints for algae, invertebrates, bacteria, and vertebrates in freshwater, saltwater, and terrestrial compartments). The n-SSWD application resulted in estimation of environmental quality criteria (hazard concentration affecting 5% and 50% of the species) and ecological risk (potentially affected fraction of species), which were then compared with similar results obtained by applying the traditional species sensitivity distribution (SSD) approach to the same dataset. The n-SSWDs were also built for specific trophic levels (e.g., primary producers) and taxonomic groups (e.g., algae), which helped to identify the most sensitive organisms. These results showd that n-SSWD is a valuable risk tool, although further testing is suggested.

Ecological status classification of the Taizi River Basin, China: a comparison of integrated risk assessment approaches

Integrated risk assessment approaches allow to achieve a sound evaluation of ecological status of river basins and to gain knowledge about the likely causes of impairment, useful for informing and supporting the decision-making process. In this paper, the integrated risk assessment (IRA) methodology developed in the EU MODELKEY project (and implemented in the MODELKEY Decision Support System) is applied to the Taizi River (China), in order to assess its Ecological and Chemical Status according to EU Water Framework Directive (WFD) requirements. The available dataset is derived by an extensive survey carried out in 2009 and 2010 across the Taizi River catchment, including the monitoring of physico-chemical (i.e. DO, EC, NH3-_N, chemical oxygen demand (COD), biological oxygen demand in 5 days (BOD5) and TP), chemical (i.e. polycyclic aromatic hydrocarbons (PAHs) and metals), biological (i.e. macroinvertebrates, fish, and algae), and hydromorphological parameters (i.e. water quantity, channel change and morphology diversity). The results show a negative trend in the ecological status from the highland to the lowland of the Taizi River Basin. Organic pollution from agriculture and domestic sources (i.e. COD and BOD5), unstable hydrological regime (i.e. water quantity shortage) and chemical pollutants from industry (i.e. PAHs and metals) are found to be the main stressors impacting the ecological status of the Taizi River Basin. The comparison between the results of the IRA methodology and those of a previous study (Leigh et al. 2012) indicates that the selection of indicators and integrating methodologies can have a relevant impact on the classification of the ecological status. The IRA methodology, which integrates information from five lines of evidence (i.e., biology, physico-chemistry, chemistry, ecotoxicology and hydromorphology) required by WFD, allows to better identify the biological communities that are potentially at risk and the stressors that are most likely responsible for the observed alterations. This knowledge can be beneficial for a more effective restoration and management of the river basin ecosystem.

Risk-based prioritization methodology for the classification of groundwater pollution sources

Water management is one of the EU environmental priorities and it is one of the most serious challenges that today's major cities are facing. The main European regulation for the protection of water resources is represented by the Water Framework Directive (WFD) and the Groundwater Directive (2006/118/EC) which require the identification, risk-based ranking and management of sources of pollution and the identification of those contamination sources that threaten the achievement of groundwater's good quality status. The aim of this paper is to present a new risk-based prioritization methodology to support the determination of a management strategy for the achievement of the good quality status of groundwater. The proposed methodology encompasses the following steps: 1) hazard analysis, 2) pathway analysis, 3) receptor vulnerability analysis and 4) relative risk estimation. Moreover, by integrating GIS functionalities and Multi Criteria Decision Analysis (MCDA) techniques, it allows to: i) deal with several sources and multiple impacted receptors within the area of concern; ii) identify different receptors' vulnerability levels according to specific groundwater uses; iii) assess the risks posed by all contamination sources in the area; and iv) provide a risk-based ranking of the contamination sources that can threaten the achievement of the groundwater good quality status. The application of the proposed framework to a well-known industrialized area located in the surroundings of Milan (Italy) is illustrated in order to demonstrate the effectiveness of the proposed framework in supporting the identification of intervention priorities. Among the 32 sources analyzed in the case study, three sources received the highest relevance score, due to the medium-high relative risks estimated for Chromium (VI) and Perchloroethylene. The case study application showed that the developed methodology is flexible and easy to adapt to different contexts, thanks to the possibility to introduce specific relevant parameters identified according to expert judgment and data availability.

Multivariate interactions of natural and anthropogenic factors on Cd behavior in arable soil

The effect of one natural factor was generally weakened by binary interactions, which were further weakened by ternary interactions. This significant effect was computed via design of experiments.

Regional risk assessment approaches to land planning for industrial polluted areas in China: the Hulunbeier region case study

The rapid industrial development and urbanization processes that occurred in China over the past 30years has increased dramatically the consumption of natural resources and raw materials, thus exacerbating the human pressure on environmental ecosystems. In result, large scale environmental pollution of soil, natural waters and urban air were recorded. The development of effective industrial planning to support regional sustainable economy development has become an issue of serious concern for local authorities which need to select safe sites for new industrial settlements (i.e. industrial plants) according to assessment approaches considering cumulative impacts, synergistic pollution effects and risks of accidental releases. In order to support decision makers in the development of efficient and effective regional land-use plans encompassing the identification of suitable areas for new industrial settlements and areas in need of intervention measures, this study provides a spatial regional risk assessment methodology which integrates relative risk assessment (RRA) and socio-economic assessment (SEA) and makes use of spatial analysis (GIS) methodologies and multicriteria decision analysis (MCDA) techniques. The proposed methodology was applied to the Chinese region of Hulunbeier which is located in eastern Inner Mongolia Autonomous Region, adjacent to the Republic of Mongolia. The application results demonstrated the effectiveness of the proposed methodology in the identification of the most hazardous and risky industrial settlements, the most vulnerable regional receptors and the regional districts which resulted to be the most relevant for intervention measures since they are characterized by high regional risk and excellent socio-economic development conditions.

A risk-based methodology for ranking environmental chemical stressors at the regional scale

A "Risk-based Tool for the Regional Ranking of Environmental Chemical Stressors" has been developed, aimed at supporting decision-makers in the identification of priority environmental contaminants, as well as priority areas, to be further assessed. The tool implements a methodology based on a quantitative Weight-of-Evidence approach, integrating three types of information, identified as "Lines-of-Evidence" (LoE), namely: LoE "Environmental Contamination" (including data on chemical contamination in environmental matrices in the region, thus providing information on potential population exposure), LoE "Intake" (including results from human biomonitoring studies, i.e. concentration of chemicals in human biological matrices, thus providing an integrated estimation of exposure) and LoE "Observed Effects" (including information on the incidence of adverse health outcomes associated with environmental exposure to chemicals). A Multi-Criteria Decision Analysis (MCDA) methodology based on fuzzy logic has been developed to support the integration of information related to these three LoEs for each chemical stressor. The tool allows one to rank chemical stressors at different spatial scales, such as at the regional level as well as within each sub-area (e.g., counties). Moreover, it supports the identification of priority sub-areas within the region, where environmental and health data suggest possible adverse health effects and thus more investigation efforts are needed. To evaluate the performance of this newly developed tool, a case-study in the Flemish region (north of Belgium) has been selected. In the case-study, data on soil contamination by metals and organic contaminants were integrated with data on exposure and effect biomarkers measured in adolescents within the framework of the human biomonitoring study performed by the Flemish Centre of Expertise on Environment and Health in the period 2002-2006. The case-study demonstrated the performance of the tool in integrating qualitative and quantitative data with expert judgement for the identification of priority contaminants and areas. The proposed approach proved to be flexible, allowing for the incorporation of individual decision-maker's preferences, and, at the same time, to be transparent since all assumptions and value attributions are traceable.

Comparison of risk-based decision-support systems for brownfield site rehabilitation: DESYRE and SADA applied to a Romanian case study

Brownfield rehabilitation is an essential step for sustainable land-use planning and management in the European Union. In brownfield regeneration processes, the legacy contamination plays a significant role, firstly because of the persistent contaminants in soil or groundwater which extends the existing hazards and risks well into the future; and secondly, problems from historical contamination are often more difficult to manage than contamination caused by new activities. Due to the complexity associated with the management of brownfield site rehabilitation, Decision Support Systems (DSSs) have been developed to support problem holders and stakeholders in the decision-making process encompassing all phases of the rehabilitation. This paper presents a comparative study between two DSSs, namely SADA (Spatial Analysis and Decision Assistance) and DESYRE (Decision Support System for the Requalification of Contaminated Sites), with the main objective of showing the benefits of using DSSs to introduce and process data and then to disseminate results to different stakeholders involved in the decision-making process. For this purpose, a former car manufacturing plant located in the Brasov area, Central Romania, contaminated chiefly by heavy metals and total petroleum hydrocarbons, has been selected as a case study to apply the two examined DSSs. Major results presented here concern the analysis of the functionalities of the two DSSs in order to identify similarities, differences and complementarities and, thus, to provide an indication of the most suitable integration options.

Application of a quantitative weight of evidence approach for ranking and prioritising occupational exposure scenarios for titanium dioxide and carbon nanomaterials

Substantial limitations and uncertainties hinder the exposure assessment of engineered nanomaterials (ENMs). The present deficit of reliable measurements and models will inevitably lead in the near term to qualitative and uncertain exposure estimations, which may fail to support adequate risk assessment and management. Therefore it is necessary to complement the current toolset with user-friendly methods for near-term nanosafety evaluation. This paper proposes an approach for relative exposure screening of ENMs. For the first time, an exposure model explicitly implements quantitative weight of evidence (WoE) methods and utilises expert judgement for filling data gaps in the available evidence-base. Application of the framework is illustrated for screening of exposure scenarios for nanoscale titanium dioxide, carbon nanotubes and fullerenes, but it is applicable to other nanomaterials as well. The results show that the WoE-based model overestimates exposure for scenarios where expert judgement was substantially used to fill data gaps, which suggests its conservative nature. In order to test how variations in input data influence the obtained results, probabilistic Monte Carlo sensitivity analysis was applied to demonstrate that the model performs in stable manner.

Climate change impact assessment on Veneto and Friuli Plain groundwater. Part I: an integrated modeling approach for hazard scenario construction

Climate change impacts on water resources, particularly groundwater, is a highly debated topic worldwide, triggering international attention and interest from both researchers and policy makers due to its relevant link with European water policy directives (e.g. 2000/60/EC and 2007/118/EC) and related environmental objectives. The understanding of long-term impacts of climate variability and change is therefore a key challenge in order to address effective protection measures and to implement sustainable management of water resources. This paper presents the modeling approach adopted within the Life+ project TRUST (Tool for Regional-scale assessment of groUndwater Storage improvement in adaptation to climaTe change) in order to provide climate change hazard scenarios for the shallow groundwater of high Veneto and Friuli Plain, Northern Italy. Given the aim to evaluate potential impacts on water quantity and quality (e.g. groundwater level variation, decrease of water availability for irrigation, variations of nitrate infiltration processes), the modeling approach integrated an ensemble of climate, hydrologic and hydrogeologic models running from the global to the regional scale. Global and regional climate models and downscaling techniques were used to make climate simulations for the reference period 1961-1990 and the projection period 2010-2100. The simulation of the recent climate was performed using observed radiative forcings, whereas the projections have been done prescribing the radiative forcings according to the IPCC A1B emission scenario. The climate simulations and the downscaling, then, provided the precipitation, temperatures and evapo-transpiration fields used for the impact analysis. Based on downscaled climate projections, 3 reference scenarios for the period 2071-2100 (i.e. the driest, the wettest and the mild year) were selected and used to run a regional geomorphoclimatic and hydrogeological model. The final output of the model ensemble produced information about the potential variations of the water balance components (e.g. river discharge, groundwater level and volume) due to climate change. Such projections were used to develop potential hazard scenarios for the case study area, to be further applied within climate change risk assessment studies for groundwater resources and associated ecosystems. This paper describes the models' chain and the methodological approach adopted in the TRUST project and analyzes the hazard scenarios produced in order to investigate climate change risks for the case study area.