Coordination-Driven Monolayer-to-Bilayer Transition in Two-Dimensional Metal-Organic Networks

We report on monolayer-to-bilayer transitions in 2D metal-organic networks (MONs) from amphiphiles supported at the water-air interface. Functionalized calix[4]arenes are assembled through the coordination of selected transition metal ions to yield monomolecular 2D crystalline layers. In the presence of Ni(II) ions, interfacial self-assembly and coordination yields stable monolayers. Cu(II) promotes 2D coordination of a monolayer which is then diffusively reorganizing, nucleates, and grows a progressive amount of second layer islands. Atomic force microscopic data of these layers after transfer onto solid substrates reveal crystalline packing geometries with submolecular resolution as they are varying in function of the building blocks and the kinetics of the assembly. We assign this monolayer-to-bilayer transition to a diffusive reorganization of the initial monolayers owing to chemical vacancies of the predominant coordination motif formed by Cu²⁺ ions. Our results introduce a new dimension into the controlled monolayer-to-multilayer architecturing of 2D metal-organic networks.

1,1'-Biisoquinolines-Neglected Ligands in the Heterocyclic Diimine Family That Provoke Stereochemical Reflections

1,1′-Biisoquinolines are a class of bidentate nitrogen donor ligands in the heterocyclic diimine family. This review briefly discusses their properties and the key synthetic pathways available and then concentrates upon their coordination behaviour. The ligands are of interest as they exhibit the phenomenon of atropisomerism (hindered rotation about the C1–C1′ bond). A notation for depicting the stereochemistry in coordination compounds containing multiple stereogenic centers is developed. The consequences of the chirality within the ligand on the coordination behaviour is discussed in detail.

Turning over on sticky balls: preparation and catalytic studies of surface-functionalized TiO2 nanoparticles

We have investigated the reactivity of rhodium(iii) complex-functionalized TiO2 nanoparticles and demonstrate a proof-of-principle study of their catalytic activity in an alcohol oxidation carried out under aqueous conditions water in air. TiO2 nanoparticles (NPs) have been treated with (4-([2,2':6',2''-terpyridin]-4'-yl)phenyl)phosphonic acid, 1, to give the functionalized NPs (1)@TiO2. Reaction between (1)@TiO2 NPs and either RhCl3·3H2O or [Rh2(μ-OAc)4(H2O)2] produced the rhodium(iii) complex-functionalized NPs Rh(1)2@TiO2. The functionalized NPs were characterized using thermogravimetric analysis (TGA), matrix-assisted laser desorption ionization (MALDI) mass spectrometry, 1H NMR and FT-IR spectroscopies; the single crystal structures of [Rh(1)2][NO3]3·1.25[H3O][NO3]·2.75H2O and of a phosphonate ester derivative were determined. 1H NMR spectroscopy was used to follow the reaction kinetics and to assess the recyclability of the NP-supported catalyst. The catalytic activity of the Rh(1)2@TiO2 NPs was compared to that of a homogeneous system containing [Rh(1)2]3+, confirming that no catalytic activity was lost upon surface-binding. Rh(1)2@TiO2 NPs were able to withstand reaction temperatures of up to 100 °C for 24 days without degradation.

Desymmetrizing Heteroleptic [Cu(P^P)(N^N)][PF6] Compounds: Effects on Structural and Photophysical Properties, and Solution Dynamic Behavior

The preparation, characterization and electrochemical and photophysical properties of a series of desymmetrized heteroleptic [Cu(P^P)(N^N)][PF₆] compounds are reported. The complexes incorporate the chelating P^P ligands bis(2-(diphenylphosphanyl)phenyl)ether (POP) and (9,9-dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphane) (xantphos), and 6-substituted 2,2′-bipyridine (bpy) derivatives with functional groups attached by –(CH₂)_n– spacers: 6-(2,2′-bipyridin-6-yl)hexanoic acid (1), 6-(5-phenylpentyl)-2,2′-bipyridine (2) and 6-[2-(4-phenyl-1H-1,2,3,triazol-1-yl)ethyl]-2,2′-bipyridine (3). [Cu(POP)(1)][PF₆], [Cu(xantphos)(1)][PF₆], [Cu(POP)(2)][PF₆], [Cu(xantphos)(2)][PF₆], and [Cu(xantphos)(3)][PF₆] have been characterized in solution using multinuclear NMR spectroscopy, and the single crystal structure of [Cu(xantphos)(3)][PF₆]^.0.5Et₂O was determined. The conformation of the 6-[2-(4-phenyl-1H-1,2,3,triazol-1-yl)ethyl]-substituent in the [Cu(xantphos)(3)]⁺ cation is such that the α- and β-CH₂ units reside in the xanthene ‘bowl’ of the xantphos ligand. The 6-substituent desymmetrizes the structure of the [Cu(P^P)(N^N)]⁺ cation and this has consequences for the interpretation of the solution NMR spectra of the five complexes. The NOESY spectra and EXSY cross-peaks provide insight into the dynamic processes operating in the different compounds. For powdered samples, emission maxima are in the range 542–555 nm and photoluminescence quantum yields (PLQYs) lie in the range 13–28%, and a comparison of PLQYs and decay lifetimes with those of [Cu(xantphos)(6-Mebpy)][PF₆] indicate that the introduction of the 6-substituent is not detrimental in terms of the photophysical properties.

Silicates, Aluminosilicates and Biogenic Silica

Silicate and aluminosilicate minerals are hugely important in the Earth's crust; this article introduces three mineral classes and describes the origins of biogenic silica.

Ice and Beyond: Tetrahedral Building Blocks in Crystals

Tetrahedral building blocks are immensely important in inorganic materials. The structure of ice is ideal for presenting this concept, combined with an introduction to hydrogen bonding. Connecting tetrahedral building blocks is then extended to polymorphs of silica.

The terpyridine isomer game: from chelate to coordination network building block

The first 4,2':6',4''-terpyridine (4,2':6',4''-tpy) containing coordination polymer was reported over 20 years ago and in the last decade, there has been increased interest in the use of ditopic 4,2':6',4''-tpy ligands as linkers in coordination polymers and 2D-networks. Functionalization in the 4'-position of 4,2':6',4''-tpy is synthetically straightforward, giving access to a large suite of building blocks. Less well explored is the coordination chemistry of 3,2':6',3''-tpy ligands which exhibit greater conformational flexibility than 4,2':6',4''-tpy. One approach to making the transition from 2D- to 3D-networks is to utilize tetratopic bis(4,2':6',4''-tpy) and bis(3,2':6',3''-tpy) ligands which act as 4-connecting nodes. In this highlight, we survey recent progress towards a better understanding of the design principles associated with the use of ditopic and tetratopic 4,2':6',4''-tpy and 3,2':6',3''-tpy containing ligands and their roles both as linkers and nodes in coordination assemblies.

Straight Versus Branched Chain Substituents in 4′-(Butoxyphenyl)-3,2′:6′,3″-terpyridines: Effects on (4,4) Coordination Network Assemblies

The preparation and characterization of the isomers rac-4′-(4-butan-2-yloxyphenyl)-3,2′:6′,3″-terpyridine (rac-2), 4′-(2-methylpropoxyphenyl)-3,2′:6′,3″-terpyridine (3) and 4′-(tert-butoxyphenyl)-3,2′:6′,3″-terpyridine (4) are reported. The compounds react with Co(NCS)₂ under conditions of crystal growth at room temperature to give single crystals of [{Co(rac-2)₂(NCS)₂}·CHCl₃]_n, [Co(3)₂(NCS)₂]_n and [{Co(4)₂(NCS)₂}·CHCl₃]_n which possess (4,4) networks, with the Co centers acting as 4-connecting nodes. Powder X-ray diffraction (PXRD) was used to confirm that the crystals chosen for single crystal X-ray diffraction were representative of the bulk samples. The detailed structures of the three networks have been compared with that of the previously reported [{Co(1)₂(NCS)₂}·4CHCl₃]n in which 1 is 4′-(butoxyphenyl)-3,2′:6′,3″-terpyridine. Whereas the switch from 1 with the straight-chain butoxy substituent to rac-2, 3 and 4 with branched chains causes significant structural perturbation, changes in the spatial properties of the branched substituents are accommodated with subtle conformational changes in the 3,2′:6′,3″-tpy domain.

The Role of Percent Volume Buried in the Characterization of Copper(I) Complexes for Lighting Purposes

The usefulness of percent volume buried (%V_bur) as a readily quantifiable property is investigated with regard to [Cu(NN)(PP)]⁺ complexes of interest for lighting purposes. Photoluminescence quantum yields (PLQYs) and single crystal X-ray structures of 100 reported compounds were assembled, %V_bur of the ligand systems were calculated and analyzed for correlations. We found that increased shielding of the central Cu(I) cation relying on shared contributions of both (NN) and (PP) ligand systems led to increased PLQYs. These findings are of relevance for future characterizations of Cu(I)-based complexes and their photophysical behavior in the solid-state.

Chemical Bonding: The Journey from Miniature Hooks to Density Functional Theory

Our modern understanding of chemistry is predicated upon bonding interactions between atoms and ions resulting in the assembly of all of the forms of matter that we encounter in our daily life. It was not always so. This review article traces the development of our understanding of bonding from prehistory, through the debates in the 19th century C.E. bearing on valence, to modern quantum chemical models and beyond.

Plant Toxins: Poison or Therapeutic?

Many plants that are classed as poisonous also have therapeutic uses, and this is illustrated using members of the Drimia and Digitalis genera which are sources of cardiac glycosides.

Are Alkynyl Spacers in Ancillary Ligands in Heteroleptic Bis(diimine)copper(I) Dyes Beneficial for Dye Performance in Dye-Sensitized Solar Cells?

The syntheses of 4,4'-bis(4-dimethylaminophenyl)-6,6'-dimethyl-2,2'-bipyridine (1), 4,4'-bis(4-dimethylaminophenylethynyl)-6,6'-dimethyl-2,2'-bipyridine (2), 4,4'-bis(4-diphenylaminophenyl)-6,6'-dimethyl-2,2'-bipyridine (3), and 4,4'-bis(4-diphenylaminophenylethynyl)-6,6'-dimethyl-2,2'-bipyridine (4) are reported along with the preparations and characterisations of their homoleptic copper(I) complexes [CuL2][PF6] (L = 1-4). The solution absorption spectra of the complexes exhibit ligand-centred absorptions in addition to absorptions in the visible region assigned to a combination of intra-ligand and metal-to-ligand charge-transfer. Heteroleptic [Cu(5)(Lancillary)]+ dyes in which 5 is the anchoring ligand ((6,6'-dimethyl-[2,2'-bipyridine]-4,4'-diyl)bis(4,1-phenylene))bis(phosphonic acid) and Lancillary = 1-4 have been assembled on fluorine-doped tin oxide (FTO)-TiO2 electrodes in dye-sensitized solar cells (DSCs). Performance parameters and external quantum efficiency (EQE) spectra of the DSCs (four fully-masked cells for each dye) reveal that the best performing dyes are [Cu(5)(1)]+ and [Cu(5)(3)]+. The alkynyl spacers are not beneficial, leading to a decrease in the short-circuit current density (JSC), confirmed by lower values of EQEmax. Addition of a co-absorbent (n-decylphosphonic acid) to [Cu(5)(1)]+ lead to no significant enhancement of performance for DSCs sensitized with [Cu(5)(1)]+. Electrochemical impedance spectroscopy (EIS) has been used to investigate the interfaces in DSCs; the analysis shows that more favourable electron injection into TiO2 is observed for sensitizers without the alkynyl spacer and confirms higher JSC values for [Cu(5)(1)]+.

Schiff Base Ancillary Ligands in Bis(diimine) Copper(I) Dye-Sensitized Solar Cells

Five 6,6'-dimethyl-2,2'-bipyridine ligands bearing N-arylmethaniminyl substituents in the 4- and 4'-positions were prepared by Schiff base condensation in which the aryl group is Ph (1), 4-tolyl (2), 4-tBuC6H4 (3), 4-MeOC6H4 (4), and 4-Me2NC6H4 (5). The homoleptic copper(I) complexes [CuL2][PF6] (L = 1-5) were synthesized and characterized, and the single crystal structure of [Cu(1)2][PF6].Et2O was determined. By using the "surfaces-as-ligands, surfaces-as-complexes" (SALSAC) approach, the heteroleptic complexes [Cu(6)(Lancillary)]+ in which 6 is the anchoring ligand ((6,6'-dimethyl-[2,2'-bipyridine]-4,4'-diyl)bis(4,1-phenylene))bis(phosphonic acid)) and Lancillary = 1-5 were assembled on FTO-TiO2 electrodes and incorporated as dyes into n-type dye-sensitized solar cells (DSCs). Data from triplicate, fully-masked DSCs for each dye revealed that the best-performing sensitizer is [Cu(6)(1)]+, which exhibits photoconversion efficiencies (η) of up to 1.51% compared to 5.74% for the standard reference dye N719. The introduction of the electron-donating MeO and Me2N groups (Lancillary = 4 and 5) is detrimental, leading to a decrease in the short-circuit current densities and external quantum efficiencies of the solar cells. In addition, a significant loss in open-circuit voltage is observed for DSCs sensitized with [Cu(6)(5)]+, which contributes to low values of η for this dye. Comparisons between performances of DSCs containing [Cu(6)(1)]+ and [Cu(6)(4)]+ with those sensitized by analogous dyes lacking the imine bond indicate that the latter prevents efficient electron transfer across the dye.

The SALSAC approach: comparing the reactivity of solvent-dispersed nanoparticles with nanoparticulate surfaces

We demonstrate that the 'surface-as-ligand, surface-as-complex' (SALSAC) approach that we have established for annealed nanoparticulate TiO₂ surfaces can be successfully applied to nanoparticles (NPs) dispersed in solution. Commercial TiO₂ NPs have been activated by initial treatment with aqueous HNO₃ followed by dispersion in water and heating under microwave conditions. We have functionalized the activated NPs with anchoring ligands 1-4; 1-3 contain one or two phosphonic acid anchoring groups and 4 has two carboxylic acid anchors; ligands 1, 2 and 4 contain 6,6'-dimethyl-2,2'-bipyridine (Me₂bpy) metal binding domains and 3 contains a 2,2':6',2''-terpyridine (tpy) unit. Ligand functionalization of the activated NPs has been validated using infrared and ¹H NMR spectroscopies, and thermogravimetric analysis. NPs functionalized with 1, 2 and 4 react with [Cu(MeCN)₄][PF₆] and those with 3 react with FeCl₂·4H₂O; metal binding has been investigated using solid-state absorption spectroscopy and scanning electron microscopy (SEM). Competitive binding of ligands 1-4 to TiO₂ NPs has been investigated and shows preferential binding of phosphonic acid over carboxylic acid anchors. For the phosphonic acids, the binding orders are 3 > 1 > 2 which is rationalized in terms of relative pK _a values (phosphonic acid and [HMe₂bpy]⁺ or [Htpy]⁺) and the number of anchoring groups in the ligands. Ligand exchange between ligand-functionalized NPs and homoleptic metal complexes gives NPs functionalized with heteroleptic copper(i) or iron(ii) complexes.

Brushing the surface: cascade reactions between immobilized nanoreactors

Functionalization of hard or soft surfaces with, for example, ligands, enzymes or proteins, is an effective and practical methodology for the development of new applications. We report the assembly of two types of nanoreactors based upon poly(dimethylsiloxane)-block-poly(2-methyl-2-oxazoline) (PDMS-b-PMOXA) diblock copolymers as scaffold, uricase and lactoperoxidase as bio-catalysts located within the nanoreactors, and melittin as the biopores inserted into the hydrophobic shell. The nanoreactors were immobilized on poly(2-hydroxyethyl methacrylate)-co-poly(2-aminoethyl methacrylate hydrochloride) (PHEMA-co-P(2-AEMA·HCl) brushes-grafted wafer surfaces by utilizing the strong supramolecular interactions between biotin and streptavidin. The (PHEMA-co-P(2-AEMA·HCl) brushes on silicon surfaces were prepared by a surface initiating atom transfer radical polymerization (ATRP) "graft-from" technique. Cascade reactions between different surface-anchored nanoreactors were demonstrated by converting Amplex® Red to the fluorescent probe resorufin by using the H2O2 produced from uric acid and H2O. The detailed properties of the nanoreactors on the functionalized surface including the binding behaviours and cascade reactions were investigated using emission spectroscopy, transmission electron microscopy (TEM), light scattering (LS), atomic force microscopy (AFM) and a quartz crystal microbalance (QCM-D). The results are proof-of-principle for the preparation of catalytically functional engineered surface materials and lay the foundation for applying this advanced functional surface material in biosensing, implanting and antimicrobial materials preparation.

‘Simple’ Oligopyridine Complexes – Sources of Unexpected Structural Diversity

The simple formulae often presented for main-group metal complexes of oligopyridines (typically 2,2′-bipyridine, 1,10-phenanthroline, and 2,2′:6′,2″-terpyridine) hide a wide variety of polymeric solid-state structures. We present an overview of these structures and reveal a plethora of 1D chains, including ladder assemblies, and 2D networks. In most assemblies, the polymeric backbone or network is defined by the metal atoms and bridging ligands other than oligopyridines. The heterocyclic ligands typically feature as peripheral decorations, often engaging in face-to-face supramolecular π-stacking interactions which define the assembly of the crystal. In 1D coordination polymers, three types of decoration predominate which we have defined as Type 1 (all the oligopyridines on the same side and π-stacked), Type 2 (alternating arrangement of oligopyridines), and Type 3 (a pairwise alternating structure).

The shiny side of copper: bringing copper(i) light-emitting electrochemical cells closer to application

Heteroleptic [Cu(P^P)(N^N)][PF₆] complexes, where N^N is 5,5′-dimethyl-2,2′-bipyridine (5,5′-Me₂bpy), 4,5,6-trimethyl-2,2′-bipyridine (4,5,6-Me₃bpy), 6-(tert-butyl)-2,2′-bipyridine (6-tBubpy) and 2-ethyl-1,10-phenanthroline (2-Etphen) and P^P is either bis(2-(diphenylphosphino)phenyl)ether (POP, PIN [oxydi(2,1-phenylene)]bis(diphenylphosphane)) or 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (xantphos, PIN (9,9-dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphane)) have been synthesized and their NMR spectroscopic, mass spectrometric, structural, electrochemical and photophysical properties were investigated. The single-crystal structures of [Cu(POP)(5,5′-Me₂bpy)][PF₆], [Cu(xantphos)(5,5′-Me₂bpy)][PF₆], [Cu(POP)(6-tBubpy)][PF₆], [Cu(POP)(4,5,6-Me₃bpy)][PF₆]·1.5Et₂O, [Cu(xantphos)(4,5,6-Me₃bpy)][PF₆]·2.33CH₂Cl₂, [Cu(POP)(2-Etphen)][PF₆] and [Cu(xantphos)(2-Etphen)][PF₆] are described. While alkyl substituents in general exhibit electron-donating properties, variation in the nature and substitution-position of the alkyl group in the N^N chelate leads to different effects in the photophysical properties of the [Cu(P^P)(N^N)][PF₆] complexes. In the solid state, the complexes are yellow to green emitters with emission maxima between 518 and 602 nm, and photoluminescence quantum yields (PLQYs) ranging from 1.1 to 58.8%. All complexes show thermally activated delayed fluorescence (TADF). The complexes were employed in the active layer of light-emitting electrochemical cells (LECs). The device performance properties are among the best reported for copper-based LECs, with maximum luminance values of up to 462 cd m⁻² and device half-lifetimes of up to 98 hours.

Heteroleptic copper(i) complexes with bisphosphanes and astutely tuned N^N chelating ligands as emitters give bright LECs with record-breaking stability.

The Sting's the Thing

Bees defend themselves by stinging and injecting a venom into their victims; bee venom is a complex mixture of chemicals including the polypeptide melittin which is mainly responsible for triggering the pain of the sting.

There Is a Future for N-Heterocyclic Carbene Iron(II) Dyes in Dye-Sensitized Solar Cells: Improving Performance through Changes in the Electrolyte

By systematic tuning of the components of the electrolyte, the performances of dye-sensitized solar cells (DSCs) with an N-heterocyclic carbene iron(II) dye have been significantly improved. The beneficial effects of an increased Li+ ion concentration in the electrolyte lead to photoconversion efficiencies (PCEs) up to 0.66% for fully masked cells (representing 11.8% relative to 100% set for N719) and an external quantum efficiency maximum (EQEmax) up to approximately 25% due to an increased short-circuit current density (JSC). A study of the effects of varying the length of the alkyl chain in 1-alkyl-3-methylimidazolium iodide ionic liquids (ILs) shows that a longer chain results in an increase in JSC with an overall efficiency up to 0.61% (10.9% relative to N719 set at 100%) on going from n-methyl to n-butyl chain, although an n-hexyl chain leads to no further gain in PCE. The results of electrochemical impedance spectroscopy (EIS) support the trends in JSC and open-circuit voltage (VOC) parameters. A change in the counterion from I- to [BF4]- for 1-propyl-3-methylimidazolium iodide ionic liquid leads to DSCs with a remarkably high JSC value for an N-heterocyclic carbene iron(II) dye of 4.90 mA cm-2, but a low VOC of 244 mV. Our investigations have shown that an increased concentration of Li+ in combination with an optimized alkyl chain length in the 1-alkyl-3-methylimidazolium iodide IL in the electrolyte leads to iron(II)-sensitized DSC performances comparable with those of containing some copper(I)-based dyes.

Hinged and Wide: A New P^P Ligand for Emissive [Cu(P^P)(N^N)][PF6] Complexes

Heteroleptic [Cu(BIPHEP)(N^N)][PF6] complexes (BIPHEP = 1,1'-biphenyl-2,2'-diylbis(diphenylphosphane)), in which N^N is 2,2'-bipyridine (bpy), 6-methyl-2,2'-bipyridine (6-Mebpy), 6-ethyl-2,2'-bipyridine (6-Etbpy), or 5,5'-dimethyl-2,2'-bipyridine (5,5'-Me2bpy), have been synthesized and characterized using multinuclear NMR spectroscopies and electrospray ionization mass spectrometry. The single crystal structures of [Cu(BIPHEP)(bpy)][PF6]∙CH2Cl2, [Cu(BIPHEP)(5,5'-Me2bpy)][PF6]∙CH2Cl2, [Cu(BIPHEP)(6-Mebpy)][PF6]∙Et2O∙0.5H2O and [Cu(BIPHEP)(6-Etbpy)][PF6] confirm distorted tetrahedral {Cu(P^P)(N^N)} coordination environments. Each compound shows a quasi-reversible Cu+/Cu2+ process. In deaerated solution, the compounds are weak emitters. Powdered samples are yellow emitters (λemmax in the range 558-583 nm) and [Cu(BIPHEP)(5,5'-Me2bpy)][PF6] exhibits the highest photoluminescence quantum yield (PLQY = 14%). On cooling to 77 K (frozen 2-methyloxolane), the emission maxima are red-shifted and the excited state lifetimes increase from τ1/2 < 8 μs, to τ1/2 values of up to 53 μs, consistent with the compounds with N^N = 6-Mebpy, 6-Etbpy and 5,5'-Me2bpy exhibiting thermally activated delayed fluorescence (TADF).

The Colour Violet: Chemistry or Physics?

Violet iridescence in purple emperor butterflies arises from structural order in the wing-scales in contrast to the chemical pigments responsible for some violet colours in Nature.

Nature's Chemical Weapons: Beetle Defenses

The defense chemicals secreted by beetles are very diverse. They are exemplified by those of members of the families Carabidae (ground beetles) and Coccinellidae (ladybirds).