Mixed-Dimensional van der Waals Heterostructure for High-Performance and Air-Stable Perovskite Nanowire Photodetectors

An organic-inorganic hybrid perovskite nanowire (NW), CH₃NH₃PbI₃, shows great potential for high-performance photodetectors due to its excellent photoresponse. However, the inefficient carrier collection between the one-dimensional (1D) NWs and metallic electrodes, as well as degradation of the perovskite, limits the viability of the CH₃NH₃PbI₃ NWs for commercial production. Here, we demonstrate a photodetector with a mixed-dimensional van der Waals heterostructure of hexagonal boron nitride (hBN)/graphene (Gr)/1D CH₃NH₃PbI₃, which exhibits excellent responsivity and specific detectivity of up to 558 A/W and 2.3 × 10¹² Jones, owing to the improved carrier extraction at the electrical contact between Gr and the NW. As for the atomic encapsulation of hBN, the device is extremely robust and maintains its outstanding performance for more than 2 months when exposed to air. Moreover, benefitting from the 1D geometry of the CH₃NH₃PbI₃ NW, our device is highly sensitive to polarized light. The mixed-dimensional van der Waals heterostructure, hBN/Gr/1D CH₃NH₃PbI₃, would provide a novel idea and protocol for fabricating high-performance and air-stable photoelectronic devices based on organic-inorganic hybrid perovskite NWs.

Enhancing Bioactive Saponin Content of Raphanus sativus Extract by Thermal Processing at Various Conditions

Pickled radish (Raphanus sativus) is a traditional Asian ingredient, but the traditional method takes decades to make this product. To optimize such a process, this study compared the saponin content of pickled radishes with different thermal processing and traditional processes (production time of 7 days, 10 years, and 20 years) and evaluated the effects of different thermal processes on the formation of radish saponin through kinetics study and mass spectrometry. The results showed that increasing the pickling time enhanced the formation of saponin in commercial pickled radishes (25 °C, 7 days, 6.50 ± 1.46 mg g-1; 3650 days, 23.11 ± 1.22 mg g-1), but these increases were lower than those induced by thermal processing (70 °C 30 days 24.24 ± 1.01 mg g-1). However, it was found that the pickling time of more than 10 years and the processing temperature of more than 80 °C reduce the saponin content. Liquid chromatography-mass spectrometry (LC-MS) analysis showed that the major saponin in untreated radish was Tupistroside G, whereas treated samples contained Asparagoside A and Timosaponin A1. Moreover, this study elucidated the chemical structure of saponins in TPR. The findings indicated that thermal treatment could induce functional saponin conversion in plants, and such a mechanism can also be used to improve the health efficacy of plant-based crops.

Applications of atmospheric cold plasma in agricultural, medical, and bioprocessing industries

Abstract

Atmospheric cold plasma (ACP) is a nonthermal technology that is extensively used in several industries. Within the scopes of engineering and biotechnology, some notable applications of ACP include waste management, material modification, medicine, and agriculture. Notwithstanding numerous applications, ACP still encounters a number of challenges such as diverse types of plasma generators and sizes, causing standardization challenges. This review focuses on the uses of ACP in engineering and biotechnology sectors in which the innovation can positively impact the operation process, enhance safety, and reduce cost. Additionally, its limitations are examined. Since ACP is still in its nascent stage, the review will also propose potential research opportunities that can help scientists gain more insights on the technology.

Key points

• ACP technology has been used in agriculture, medical, and bioprocessing industries.

• Chemical study on the reactive species is crucial to produce function-specific ACP.

• Different ACP devices and conditions still pose standardization problems.

Recent Advances in the Development of Lipid-, Metal-, Carbon-, and Polymer-Based Nanomaterials for Antibacterial Applications

Infections caused by multidrug-resistant (MDR) bacteria are becoming a serious threat to public health worldwide. With an ever-reducing pipeline of last-resort drugs further complicating the current dire situation arising due to antibiotic resistance, there has never been a greater urgency to attempt to discover potential new antibiotics. The use of nanotechnology, encompassing a broad range of organic and inorganic nanomaterials, offers promising solutions. Organic nanomaterials, including lipid-, polymer-, and carbon-based nanomaterials, have inherent antibacterial activity or can act as nanocarriers in delivering antibacterial agents. Nanocarriers, owing to the protection and enhanced bioavailability of the encapsulated drugs, have the ability to enable an increased concentration of a drug to be delivered to an infected site and reduce the associated toxicity elsewhere. On the other hand, inorganic metal-based nanomaterials exhibit multivalent antibacterial mechanisms that combat MDR bacteria effectively and reduce the occurrence of bacterial resistance. These nanomaterials have great potential for the prevention and treatment of MDR bacterial infection. Recent advances in the field of nanotechnology are enabling researchers to utilize nanomaterial building blocks in intriguing ways to create multi-functional nanocomposite materials. These nanocomposite materials, formed by lipid-, polymer-, carbon-, and metal-based nanomaterial building blocks, have opened a new avenue for researchers due to the unprecedented physiochemical properties and enhanced antibacterial activities being observed when compared to their mono-constituent parts. This review covers the latest advances of nanotechnologies used in the design and development of nano- and nanocomposite materials to fight MDR bacteria with different purposes. Our aim is to discuss and summarize these recently established nanomaterials and the respective nanocomposites, their current application, and challenges for use in applications treating MDR bacteria. In addition, we discuss the prospects for antimicrobial nanomaterials and look forward to further develop these materials, emphasizing their potential for clinical translation.

Solid and Liquid Surface-Supported Bacterial Membrane Mimetics as a Platform for the Functional and Structural Studies of Antimicrobials

Increasing antibiotic resistance has provoked the urgent need to investigate the interactions of antimicrobials with bacterial membranes. The reasons for emerging antibiotic resistance and innovations in novel therapeutic approaches are highly relevant to the mechanistic interactions between antibiotics and membranes. Due to the dynamic nature, complex compositions, and small sizes of native bacterial membranes, bacterial membrane mimetics have been developed to allow for the in vitro examination of structures, properties, dynamics, and interactions. In this review, three types of model membranes are discussed: monolayers, supported lipid bilayers, and supported asymmetric bilayers; this review highlights their advantages and constraints. From monolayers to asymmetric bilayers, biomimetic bacterial membranes replicate various properties of real bacterial membranes. The typical synthetic methods for fabricating each model membrane are introduced. Depending on the properties of lipids and their biological relevance, various lipid compositions have been used to mimic bacterial membranes. For example, mixtures of phosphatidylethanolamines (PE), phosphatidylglycerols (PG), and cardiolipins (CL) at various molar ratios have been used, approaching actual lipid compositions of Gram-positive bacterial membranes and inner membranes of Gram-negative bacteria. Asymmetric lipid bilayers can be fabricated on solid supports to emulate Gram-negative bacterial outer membranes. To probe the properties of the model bacterial membranes and interactions with antimicrobials, three common characterization techniques, including quartz crystal microbalance with dissipation (QCM-D), surface plasmon resonance (SPR), and neutron reflectometry (NR) are detailed in this review article. Finally, we provide examples showing that the combination of bacterial membrane models and characterization techniques is capable of providing crucial information in the design of new antimicrobials that combat bacterial resistance.

Coassembled Nitric Oxide-Releasing Nanoparticles with Potent Antimicrobial Efficacy against Methicillin-Resistant Staphylococcus aureus (MRSA) Strains

Nitric oxide (NO)-releasing nanoparticles are effective nanomedicines with diverse therapeutic advantages compared with small molecule-based NO donors. Here, we report a new class of furoxan-based NO-releasing nanoparticles using a simple, creative yet facile coassembly approach. This is the first time we demonstrated that the coassembled NO-releasing nanoparticles with poly(ethylene glycol)₁₀₁-block-poly(propylene glycol)₅₆-block-poly(ethylene glycol)₁₀₁ (Pluronic F127) had potent antimicrobial efficacies against methicillin-resistant Staphylococcus aureus (MRSA) strains. Nanoparticles obtained from the coassembly of either 4-(1-(3-methylpentan-5-ol)oxyl)(3-phenylsulfonyl) furoxan (compound 1) or 4-methoxy(3-phenylsulfonyl) furoxan (compound 2) with Pluronic F127 exhibit 4-fold improved antimicrobial activities compared to their self-assembled counterparts without Pluronic F127. 5(6)-Carboxylfluorescein (CF) leakage experiments further reveal that both coassembled NO-releasing nanoparticles show stronger interactions with lipid bilayers than those self-assembled alone. Subsequently, their strong plasma membrane-damaging capabilities are confirmed under both high-resolution optical microscopy and scanning electron microscopy characterizations. This coassembly approach could be readily applied to other small molecule-based antimicrobials, providing new solutions and important insights to further antimicrobial recipe design.

Bandgap Funneling in Bismuth-Based Hybrid Perovskite Photocatalyst with Efficient Visible-Light-Driven Hydrogen Evolution

The photocatalytic system using hydrohalic acid (HX) for hydrogen production is a promising strategy to generate clean and renewable fuels as well as value-added chemicals (such as X₂ /X₃ ^- ). However, it is still challenging to develop a visible-light active and strong-acid resistive photocatalyst. Hybrid perovskites have been recognized as a potential photocatalyst for photovoltaic HX splitting. Herein, a novel environmentally friendly mixed halide perovskite MA₃ Bi₂ Cl_9-x I_x with a bandgap funnel structure is developed, i.e., confirmed by energy dispersive X-ray analysis and density functional theory calculations. Due to gradient neutral formation energy within iodine-doped MA₃ Bi₂ Cl₉ , the concentration of iodide element decreases from the surface to the interior across the MA₃ Bi₂ Cl_9-x I_x perovskite. Because of the aligned energy levels of iodide/chloride-mixed MA₃ Bi₂ Cl_9-x I_x , a graded bandgap funnel structure is therefore formed, leading to the promotion of photoinduced charge transfer from the interior to the surface for efficient photocatalytic redox reaction. As a result, the hydrogen generation rate of the optimized MA₃ Bi₂ Cl_9-x I_x is enhanced up to ≈341 ± 61.7 µmol h^-1 with a Pt co-catalyst under visible light irradiation.

Ligand-Engineered HgTe Colloidal Quantum Dot Solids for Infrared Photodetectors

HgTe colloidal quantum dots (CQDs) are promising absorber systems for infrared detection due to their widely tunable photoresponse in all infrared regions. Up to now, the best-performing HgTe CQD photodetectors have relied on using aggregated CQDs, limiting the device design, uniformity and performance. Herein, we report a ligand-engineered approach that produces well-separated HgTe CQDs. The present strategy first employs strong-binding alkyl thioalcohol ligands to enable the synthesis of well-dispersed HgTe cores, followed by a second growth process and a final postligand modification step enhancing their colloidal stability. We demonstrate highly monodisperse HgTe CQDs in a wide size range, from 4.2 to 15.0 nm with sharp excitonic absorption fully covering short- and midwave infrared regions, together with a record electron mobility of up to 18.4 cm² V^-1 s^-1. The photodetectors show a room-temperature detectivity of 3.9 × 10¹¹ jones at a 1.7 μm cutoff absorption edge.

Suppressing photoinduced charge recombination at the BiVO4||NiOOH junction by sandwiching an oxygen vacancy layer for efficient photoelectrochemical water oxidation

Nickel oxyhydroxide (NiOOH) is regarded as one of the promising cocatalysts to enhance the catalytic performance of photoanodes but suffers from serious interfacial charge-carrier recombination at the photoanode||NiOOH interface. In this work, surface-engineered BiVO₄ photoanodes are fabricated by sandwiching an oxygen vacancy (O_vac) interlayer between BiVO₄ and NiOOH. The surface O_vac interlayer is introduced on BiVO₄ by a chemical reduction treatment using a mild reducing agent, sodium hypophosphite. The induced O_vac can alleviate the interfacial charge-carrier recombination at the BiVO4||NiOOH junction, resulting in efficient charge separation and transfer efficiencies, while an outer NiOOH layer is coated to prevent the O_vac layer from degradation. As a result, the as-prepared NiOOH-P-BiVO₄ photoanode exhibits a high photocurrent density of 3.2 mA cm^-2 at 1.23 V vs. RHE under the irradiation of 100 mW/cm² AM 1.5G simulated sunlight, in comparison to those of bare BiVO₄, P-BiVO_4, and NiOOH-BiVO₄ photoanodes (1.1, 2.1 and 2.3 mA cm^-2, respectively). In addition to the superior photoactivity, the 5-h amperometric measurements illustrate improved stability of the surface-engineered NiOOH-P-BiVO₄ photoanode. Our work showcases the feasibility of combining cocatalysts with O_vac, for improved photoactivity and stability of photoelectrodes.

A polytherapy based approach to combat antimicrobial resistance using cubosomes

A depleted antimicrobial drug pipeline combined with an increasing prevalence of Gram-negative ‘superbugs’ has increased interest in nano therapies to treat antibiotic resistance. As cubosomes and polymyxins disrupt the outer membrane of Gram-negative bacteria via different mechanisms, we herein examine the antimicrobial activity of polymyxin-loaded cubosomes and explore an alternative strategy via the polytherapy treatment of pathogens with cubosomes in combination with polymyxin. The polytherapy treatment substantially increases antimicrobial activity compared to polymyxin B-loaded cubosomes or polymyxin and cubosomes alone. Confocal microscopy and neutron reflectometry suggest the superior polytherapy activity is achieved via a two-step process. Firstly, electrostatic interactions between polymyxin and lipid A initially destabilize the outer membrane. Subsequently, an influx of cubosomes results in further membrane disruption via a lipid exchange process. These findings demonstrate that nanoparticle-based polytherapy treatments may potentially serve as improved alternatives to the conventional use of drug-loaded lipid nanoparticles for the treatment of “superbugs”.

An increasing prevalence of Gram-negative bacteria increases the interest in nanotherapies to treat antibiotic resistance. Here, the authors examine the antimicrobial activity of polymyxin-loaded cubosomes and explore a polytherapy treatment of pathogens with cubosomes in combination with polymyxin.

Matching Charge Extraction Contact for Infrared PbS Colloidal Quantum Dot Solar Cells

Infrared solar cells (IRSCs) can supplement silicon or perovskite SCs to broaden the utilization of the solar spectrum. As an ideal infrared photovoltaic material, PbS colloidal quantum dots (CQDs) with tunable bandgaps can make good use of solar energy, especially the infrared region. However, as the QD size increases, the energy level shrinking and surface facet evolution makes us reconsider the matching charge extraction contacts and the QD passivation strategy. Herein, different to the traditional sol-gel ZnO layer, energy-level aligned ZnO thin film from a magnetron sputtering method is adopted for electron extraction. In addition, a modified hybrid ligand recipe is developed for the facet passivation of large size QDs. As a result, the champion IRSC delivers an open circuit voltage of 0.49 V and a power conversion efficiency (PCE) of 10.47% under AM1.5 full-spectrum illumination, and the certified PCE is over 10%. Especially the 1100 nm filtered efficiency achieves 1.23%. The obtained devices also show high storage stability. The present matched electron extraction and QD passivation strategies are expected to highly booster the IR conversion yield and promote the fast development of new conception QD optoelectronics.

TiO2/guar gum hydrogel composite for adsorption and photodegradation of methylene blue

The development of porous adsorbent materials from renewable resources for water and wastewater treatment has received considerable interest from academia and industry. This work aims to synthesize composite hydrogel from the combination of guar gum (a neutral galactomannan polysaccharide) and TiO₂. The TiO₂-embedded guar gum hydrogel (TiO₂@GGH) was utilized to remove methylene blue through adsorption and photodegradation. The presence of TiO₂ particles in the hydrogel matrix (TiO₂@GGH) was confirmed by scanning electron microscopy-energy dispersive X-ray and X-ray photoelectron spectroscopy analysis. The mercury intrusion and N₂ sorption isotherm indicate the macroporous structure of the TiO₂@GGH composite, showing the presence of pore sizes ~420 μm. The dye removal efficiency of the GGH and TiO₂@GGH was evaluated in batch mode at ambient temperature under varying pH. The effect of UV radiation on the dye removal efficiency was also assessed. The results demonstrated that the highest dye removal was recorded at pH 10, with the equilibrium condition achieved within 5 h. UV radiation was shown to enhance dye removal. The maximum adsorption capacity of TiO₂@GGH is 198.61 mg g^-1, while GGH sorbent is 188.53 mg g^-1. The results imply that UV radiation gives rise to the photodegradation effect.

Electrochemically controlled in situ conversion of CO2 to defective carbon nanotubes for enhanced H2O2 production

Defects on carbon nanotubes (CNTs) can be used as active sites to promote the occurrence of catalytic reactions and improve the ability of catalysts. Although some progress has been made in the synthesis of defects on carbon nanotubes (CNTs), most of the defects are caused by acid etching or high-temperature pyrolysis of organics, which is detrimental to the environment, and the defects are uncontrollable. Herein, we report the eco-friendly and controllable synthesis of defective CNTs by reduction of CO₂ under cathodic polarization in Li₂CO₃-based molten salts. The defective degree of CNTs can be tuned by changing the applied electrolysis current. The results show that low current is beneficial for the synthesis of CNTs with more defect sites. The most defect-rich carbon nanotubes synthesized under 300 mA cm^-2 electrolysis (CNTs-B₂O₃-300) in a molten Li₂CO₃/B₂O₃ composite melt performed the best in the 2e^- oxygen reduction reaction (ORR) compared with CNTs-B₂O₃-400 and CNTs-B₂O₃-500 obtained under higher current density electrolysis. This work provides an alternative strategy for the design and synthesis of defect-rich carbon materials for catalysis and energy applications.

Atomically Dispersed Iron Metal Site in a Porphyrin-Based Metal-Organic Framework for Photocatalytic Nitrogen Fixation

The rational design of photocatalysts for efficient nitrogen (N₂) fixation at ambient conditions is important for revolutionizing ammonia production and quite challenging because the great difficulty lies in the adsorption and activation of the inert N₂. Inspired by a biological molecule, chlorophyll, featuring a porphyrin structure as the photosensitizer and enzyme nitrogenase featuring an iron (Fe) atom as a favorable binding site for N₂via π-backbonding, here we developed a porphyrin-based metal-organic framework (PMOF) with Fe as the active center as an artificial photocatalyst for N₂ reduction reaction (NRR) under ambient conditions. The PMOF features aluminum (Al) as metal node imparting high stability and Fe incorporated and atomically dispersed by residing at each porphyrin ring promoting the adsorption and the activation of N₂, termed Al-PMOF(Fe). Compared with the pristine Al-PMOF, Al-PMOF(Fe) exhibits a substantial enhancement in NH₃ yield (635 μg g^-1_cat.) and production rate (127 μg h^-1 g^-1_cat.) of 82% and 50%, respectively, on par with the best-performing MOF-based NRR catalysts. Three cycles of photocatalytic NRR experimental results corroborate a stable photocatalytic activity of Al-PMOF(Fe). The combined experimental and theoretical results reveal that the Fe-N site in Al-PMOF(Fe) is the active photocatalytic center that can mitigate the difficulty of the rate-determining step in photocatalytic NRR. The possible reaction pathways of NRR on Al-PMOF(Fe) were established. Our study of porphyrin-based MOF for the photocatalytic NRR will provide insight into the rational design of catalysts for artificial photosynthesis.

Bio-inspired and Eco-friendly Synthesis of 3D Spongy Meso-Microporous Carbons from CO2 for Supercapacitors

Inspired by the spongy bone structures, three-dimensional (3D) sponge-like carbons with meso-microporous structures are synthesized through one-step electro-reduction of CO₂ in molten carbonate Li₂ CO₃ -Na₂ CO₃ -K₂ CO₃ at 580 °C. SPC4-0.5 (spongy porous carbon obtained by electrolysis of CO₂ at 4 A for 0.5 h) is synthesized with the current efficiency of 96.9 %. SPC4-0.5 possesses large electrolyte ion accessible surface area, excellent wettability and electronical conductivity, ensuring the fast and effective mass and charge transfer, which make it an advcanced supercapacitor electrode material. SPC4-0.5 exhibits a specific capacitance as high as 373.7 F g^-1 at 0.5 A g^-1 , excellent cycling stability (retaining 95.9 % of the initial capacitance after 10000 cycles at 10 A g^-1 ), as well as high energy density. The applications of SPC4-0.5 in quasi-solid-state symmetric supercapacitor and all-solid-state flexible devices for energy storage and wearable piezoelectric sensor are investigated. Both devices show considerable capacitive performances. This work not only presents a controllable and facile synthetic route for the porous carbons but also provides a promising way for effective carbon reduction and green energy production.

Enhanced antioxidant activity of Chenopodium formosanum Koidz. by lactic acid bacteria: Optimization of fermentation conditions

In this study, different probiotics commonly used to produce fermented dairy products were inoculated independently for Chenopodium formosanum Koidz. fermentation. The strain with the highest level of antioxidant activity was selected and the fermentation process was further optimized via response surface methodology (RSM). Lactobacillus plantarum BCRC 11697 was chosen because, compared to other lactic acid bacteria, it exhibits increased free radical scavenging ability and can produce more phenolic compounds, DPPH (from 72.6% to 93.2%), and ABTS (from 64.2% to 76.9%). Using RSM, we further optimize the fermentation protocol of BCRC 11697 by adjusting the initial fermentation pH, agitation speed, and temperature to reach the highest level of antioxidant activity (73.5% of DPPH and 93.8% of ABTS). The optimal protocol (pH 5.55, 104 rpm, and 24.4°C) resulted in a significant increase in the amount of phenolic compounds as well as the DPPH and ABTS free radical scavenging ability of BCRC 11697 products. The IC50 of the DPPH and ABTS free radical scavenging ability were 0.33 and 2.35 mg/mL, respectively, and both protease and tannase activity increased after RSM. An increase in lower molecular weight (<24 kDa) protein hydrolysates was also observed. Results indicated that djulis fermented by L. plantarum can be a powerful source of natural antioxidants for preventing free radical-initiated diseases.

Targeted delivery of LM22A-4 by cubosomes protects retinal ganglion cells in an experimental glaucoma model

Glaucoma, a major cause of irreversible blindness worldwide, is associated with elevated intraocular pressure (IOP) and progressive loss of retinal ganglion cells (RGCs) that undergo apoptosis. A mechanism for RGCs injury involves impairment of neurotrophic support and exogenous supply of neurotrophic factors has been shown to be beneficial. However, neurotrophic factors can have widespread effects on neuronal tissues, thus targeting neurotrophic support to injured neurons may be a better neuroprotective strategy. In this study, we have encapsulated LM22A-4, a small neurotrophic factor mimetic, into Annexin V-conjugated cubosomes (L4-ACs) for targeted delivery to injured RGCs in a model of acute IOP elevation, which is induced by acute IOP elevation. We have tested cubosomes formulations that encapsulate from 9% to 33% LM22A-4. Our data indicated that cubosomes encapsulating 9% and 17% LM22A-4 exhibited a mixture of Pn3m/Im3m cubic phase, whereas 23% and 33% showed a pure Im3m cubic phase. We found that 17% L4-ACs with Pn3m/Im3m symmetries showed better in-situ and in-vitro lipid membrane interactions than the 23% and 33% L4-ACs with Im3m symmetry. In vivo experiments showed that 17% L4-ACs targeted the posterior retina and the optic nerve head, which prevented RGCs loss and improved functional outcomes in a mouse model of acute IOP elevation. These results provide evidence that Annexin V-conjugated cubosomes-based LM22A-4 delivery may be a useful targeted approach to prevent the progression of RGCs loss in glaucoma. STATEMENT OF SIGNIFICANCE: Recent studies suggest that the therapy of effectively delivering neurotrophic factors to the injured retinal ganglion cells (RGCs) could promote the survival of RGCs in glaucoma. Our present work has for the first time used cubosomes as an active targeted delivery system and have successfully delivered a neuroprotective drug to the damaged RGCs in vivo. Our new cubosomal formulation can protect apoptotic cell death in vitro and in vivo, showing that cubosomes are a promising drug carrier system for ocular drug delivery and glaucoma treatment. We have further found that by controlling cubosomes in Pn3m phase we can facilitate delivery of neuroprotective drug through apoptotic membranes. This data, we believe, has important implications for future design and formulation of cubosomes for therapeutic applications.

High-performance large-area quasi-2D perovskite light-emitting diodes

Serious performance decline arose for perovskite light-emitting diodes (PeLEDs) once the active area was enlarged. Here we investigate the failure mechanism of the widespread active film fabrication method; and ascribe severe phase-segregation to be the reason. We thereby introduce L-Norvaline to construct a COO--coordinated intermediate phase with low formation enthalpy. The new intermediate phase changes the crystallization pathway, thereby suppressing the phase-segregation. Accordingly, high-quality large-area quasi-2D films with desirable properties are obtained. Based on this, we further rationally adjusted films' recombination kinetics. We reported a series of highly-efficient green quasi-2D PeLEDs with active areas of 9.0 cm2. The peak EQE of 16.4% is achieved in  = 3, represent the most efficient large-area PeLEDs yet. Meanwhile, high brightness device with luminance up to 9.1 × 104 cd m-2 has achieved in = 10 film.

Doubly N-confused phlorin and phlorinone analogue

A doubly N-confused phlorin and phlorinone analogue were synthesized from a β,β'-linked dipyrromethane precursor and characterized by means of NMR and UV-Vis spectroscopies, X-ray crystallography, and electrochemistry. Solvents have a considerable impact on the optical absorption of the doubly N-confused phlorin so that it can differentiate simple alcohols such as methanol and ethanol.

Conjugated Polymer Nanoparticles Based on Copper Coordination for Real-Time Monitoring of pH-Responsive Drug Delivery

Metal coordination-driven composite systems have excellent stability and pH-responsive ability, making them suitable for specific drug delivery in physiological conditions. In this study, an anionic conjugated polymer PPEIDA with a poly(p-phenylene ethynylene) backbone and iminodiacetic acid (IDA) side chains is used as a drug carrier to construct a class of pH-responsive nanoparticles, PPEIDA-Cu-DOX conjugated polymer nanoparticles (CPNs), by taking advantage of the metal coordination interaction of Cu²⁺ with PPEIDA and the drug doxorubicin (DOX). PPEIDA-Cu-DOX CPNs have high drug loading and encapsulation efficiency (EE), calculated to be 54.30 ± 1.10 and 95.80 ± 0.84%, respectively. Due to the good spectral overlap, Förster resonance energy transfer (FRET) takes place between PPEIDA and the drug DOX, which enables the observation of the loading and the release of DOX from CPNs in an acidic environment by monitoring fluorescence emission changes. Therefore, PPEIDA-Cu-DOX CPNs can also be used in real-time cell imaging to monitor drug release in addition to delivering DOX targeting tumor cells. Compared with free DOX, PPEIDA-Cu-DOX CPNs show a similar inhibition to tumor cells and lower toxicity to normal cells. Our results demonstrate the feasibility and potential of constructing pH-responsive CPNs via metal-ligand coordination interactions for cancer treatment.

Substrate-dependent arrangements of the subunits of the BAM complex determined by neutron reflectometry

In Gram-negative bacteria, the β-barrel assembly machinery (BAM) complex catalyses the assembly of β-barrel proteins into the outer membrane, and is composed of five subunits: BamA, BamB, BamC, BamD and BamE. Once assembled, - β-barrel proteins can be involved in various functions including uptake of nutrients, export of toxins and mediating host-pathogen interactions, but the precise mechanism by which these ubiquitous and often essential β-barrel proteins are assembled is yet to be established. In order to determine the relative positions of BAM subunits in the membrane environment we reconstituted each subunit into a biomimetic membrane, characterizing their interaction and structural changes by Quartz Crystal Microbalance with Dissipation monitoring (QCM-D) and neutron reflectometry. Our results suggested that the binding of BamE, or a BamDE dimer, to BamA induced conformational changes in the polypeptide transported-associated (POTRA) domains of BamA, but that BamB or BamD alone did not promote any such changes. As monitored by neutron reflectometry, addition of an unfolded substrate protein extended the length of POTRA domains further away from the membrane interface as part of the mechanism whereby the substrate protein was folded into the membrane.