Histological and biomechanical changes in a mouse model of venous thrombus remodeling

BACKGROUND

Deep vein thrombosis and the risk of pulmonary embolism are significant causes of morbidity and mortality. Much remains unclear, however, about the mechanisms by which a venous thrombus initiates, progresses, or resolves. In particular, there is a pressing need to characterize the evolving mechanical properties of a venous thrombus for its mechanical integrity is fundamental to many disease sequelae.

OBJECTIVE

The primary goal of the present study was to initiate a correlation between evolving histological changes and biomechanical properties of venous thrombus.

METHODS

We employed an inferior vena cava ligation model in mice to obtain cylindrical samples of thrombus that were well suited for mechanical testing and that could be explanted at multiple times following surgery. Using uniaxial micro-mechanical testing, we collected stress-stretch data that were then fit with a microstructurally-inspired material model before submitting the samples to immunohistological examination.

RESULTS

We found that venous thrombus underwent a radially inward directed replacement of fibrin with collagen between 2 weeks and 4 weeks of development, which was accompanied by the infiltration of inflammatory and mesenchymal cells. These histological changes correlated with a marked increase in material stiffness.

CONCLUSIONS

We demonstrated that 2 to 4 week old venous thrombus undergoes drastic remodeling from a fibrin-dominated mesh to a collagen-dominated microstructure and that these changes are accompanied by dramatic changes in biomechanical behavior.

Mechanobiological stability: a new paradigm to understand the enlargement of aneurysms?

Static and dynamic mechanical instabilities were previously suggested, and then rejected, as mediators of aneurysmal development, which leaves open the question of the underlying mechanism. In this paper, we suggest as a new paradigm the interpretation of aneurysms as mechanobiological instabilities. For illustrative purposes, we compare analytical calculations with computational simulations of the growth and remodelling of idealized fusiform abdominal aortic aneurysms and experimental and clinical findings. We show that the concept of mechanobiological stability is consistent with the impact of risk factors such as age, smoking or diabetes on the initiation and enlargement of these lesions as well as adaptive processes in the healthy abdominal aorta such as dilatation during ageing or in hypertension. In general, high stiffness, an increased capacity for stress-mediated matrix production, and slow matrix turnover all improve the mechanobiological stability of blood vessels. This theoretical understanding may help guide prognosis and the development of future therapies for aneurysms as it enables systematic ways to attenuate enlargement.

Tissue Transglutaminase, Not Lysyl Oxidase, Dominates Early Calcium-Dependent Remodeling of Fibroblast-Populated Collagen Lattices

Cell-populated collagen gels have provided significant insight into the cellular contractile mechanisms and cell-matrix interactions that are necessary for compacting and remodeling extant matrix. Nevertheless, little research has been devoted towards determining how cells entrench these deformations that contribute to establishing a preferred mechanical state. To this end, we examined the roles of two covalent matrix cross-linkers, i.e. tissue transglutaminase and lysyl oxidase, during global remodeling of the free-floating fibroblast-populated collagen lattice. Inhibition of tissue transglutaminase resulted in a reduced rate of compaction compared to controls during early remodeling (up to 2 days). In contrast, inhibition of lysyl oxidase did not alter the early compaction of these lattices, but it reduced the compaction after 2 days of culture. Acute inhibition of different contractile mechanisms suggested further that calcium-dependent contractility may have dominated during the initial remodeling of the collagen lattice before giving way to calcium-independent contractility at later times. In summary, these findings suggest that early remodeling of the free-floating collagen lattice is facilitated by calcium-dependent cell contraction while entrenchment is dominated by a tissue transglutaminase-mediated cross-linking of the extant matrix. As remodeling continues, however, lysyl oxidase increases its contribution, perhaps by consolidating de novo collagen fibrils into fibers to continue the remodeling while the cells transition to a more sustained, calcium-independent contractility. These results promise to influence future tissue engineering studies as well as computational simulations aimed at understanding matrix remodeling in complex in vivo situations.

Decreased elastic energy storage, not increased material stiffness, characterizes central artery dysfunction in fibulin-5 deficiency independent of sex

Central artery stiffness has emerged over the past 15 years as a clinically significant indicator of cardiovascular function and initiator of disease. Loss of elastic fiber integrity is one of the primary contributors to increased arterial stiffening in aging, hypertension, and related conditions. Elastic fibers consist of an elastin core and multiple glycoproteins; hence defects in any of these constituents can adversely affect arterial wall mechanics. In this paper, we focus on mechanical consequences of the loss of fibulin-5, an elastin-associated glycoprotein involved in elastogenesis. Specifically, we compared the biaxial mechanical properties of five central arteries-the ascending thoracic aorta, descending thoracic aorta, suprarenal abdominal aorta, infrarenal abdominal aorta, and common carotid artery-from male and female wild-type and fibulin-5 deficient mice. Results revealed that, independent of sex, all five regions in the fibulin-5 deficient mice manifested a marked increase in structural stiffness but also a marked decrease in elastic energy storage and typically an increase in energy dissipation, with all differences being most dramatic in the ascending and abdominal aortas. Given that the primary function of large arteries is to store elastic energy during systole and to use this energy during diastole to work on the blood, fibulin-5 deficiency results in a widespread diminishment of central artery function that can have significant effects on hemodynamics and cardiac function.

Local versus global mechanical effects of intramural swelling in carotid arteries

Glycosaminoglycans (GAGs) are increasingly thought to play important roles in arterial mechanics and mechanobiology. We recently suggested that these highly negatively charged molecules, well known for their important contributions to cartilage mechanics, can pressurize intralamellar units in elastic arteries via a localized swelling process and thereby impact both smooth muscle mechanosensing and structural integrity. In this paper, we report osmotic loading experiments on murine common carotid arteries that revealed different degrees and extents of transmural swelling. Overall geometry changed significantly with exposure to hypo-osmotic solutions, as expected, yet mean pressure-outer diameter behaviors remained largely the same. Histological analyses revealed further that the swelling was not always distributed uniformly despite being confined primarily to the media. This unexpected finding guided a theoretical study of effects of different distributions of swelling on the wall stress. Results suggested that intramural swelling can introduce highly localized changes in the wall mechanics that could induce differential mechanobiological responses across the wall. There is, therefore, a need to focus on local, not global, mechanics when examining issues such as swelling-induced mechanosensing.

Computational modelling suggests good, bad and ugly roles of glycosaminoglycans in arterial wall mechanics and mechanobiology

The medial layer of large arteries contains aggregates of the glycosaminoglycan hyaluronan and the proteoglycan versican. It is increasingly thought that these aggregates play important mechanical and mechanobiological roles despite constituting only a small fraction of the normal arterial wall. In this paper, we offer a new hypothesis that normal aggregates of hyaluronan and versican pressurize the intralamellar spaces, and thereby put into tension the radial elastic fibres that connect the smooth muscle cells to the elastic laminae, which would facilitate mechanosensing. This hypothesis is supported by novel computational simulations using two complementary models, a mechanistically based finite-element mixture model and a phenomenologically motivated continuum hyperelastic model. That is, the simulations suggest that normal aggregates of glycosaminoglycans/proteoglycans within the arterial media may play equally important roles in supporting (i.e. a structural role) and sensing (i.e. an instructional role) mechanical loads. Additional simulations suggest further, however, that abnormal increases in these aggregates, either distributed or localized, may over-pressurize the intralamellar units. We submit that these situations could lead to compromised mechanosensing, anoikis and/or reduced structural integrity, each of which represent fundamental aspects of arterial pathologies seen, for example, in hypertension, ageing and thoracic aortic aneurysms and dissections.

A haemodynamic predictor of intraluminal thrombus formation in abdominal aortic aneurysms

Intraluminal thrombus (ILT) is present in over 75% of all abdominal aortic aneurysms (AAAs) and probably contributes to the complex biomechanics and pathobiology of these lesions. A reliable predictor of thrombus formation in enlarging lesions could thereby aid clinicians in treatment planning. The primary goal of this work was to identify a new phenomenological metric having clinical utility that is motivated by the hypothesis that two basic haemodynamic features must coincide spatially and temporally to promote the formation of a thrombus on an intact endothelium—platelets must be activated within a shear flow and then be presented to a susceptible endothelium. Towards this end, we propose a new thrombus formation potential (TFP) that combines information on the flow-induced shear history experienced by blood-borne particles that come in close proximity to the endothelium with information on both the time-averaged wall shear stress (WSS) and the oscillatory shear index (OSI) that locally affect the endothelial mechanobiology. To illustrate the possible utility of this new metric, we show computational results for 10 carotid arteries from five patients where regions of low WSS and high OSI tend not to be presented with activated platelets (i.e. they have a low TFP), consistent with the thrombo-resistance of the healthy carotid despite its complex haemodynamics. Conversely, we show results for three patients that high TFP co-localizes with regions of observed thin thrombus in AAAs, which contrasts with findings of low TFP for the abdominal aorta of three healthy subjects. We submit that these promising results suggest the need for further consideration of the TFP, or a similar combined metric, as a potentially useful clinical predictor of the possible formation of ILT in AAAs.

Vascular homeostasis and the concept of mechanobiological stability

Vascular mechanics has been studied in depth since the early 1970s mainly following classical concepts from continuum mechanics. Yet, an important distinction of blood vessels, in contrast to typical engineering materials, is the continuous degradation and deposition of material in these living tissues. In this paper we examine mechanical consequences of such mass turnover. Motivated by Lyapunov's stability theory, we introduce the new concepts of mechanobiological equilibrium and stability and demonstrate that blood vessels can maintain their structure and function under physiological conditions only if new material is deposited at a certain prestress and the vessels are both mechanically and mechanobiologically stable. Moreover, we introduce the concept of mechanobiological adaptivity as a third corner stone to understand vascular behavior on a continuum level. We demonstrate that adaptivity represents a key difference between the stability of mechanobiological and typical human-made systems. Based on these ideas, we suggest a change of paradigm that can be illustrated by considering a common arterial pathology. We suggest that aneurysms can be interpreted as mechanobiological instabilities and that predictions of their rupture risk should not only consider the maximal diameter or wall stress, but also the mechanobiological stability. A mathematical analysis of the impact of the different model parameters on the so-called mechanobiological stability margin, a single scalar used to characterize mechanobiological stability, reveals that this stability increases with the characteristic time constant of mass turnover, material stiffness, and capacity for stress-dependent changes in mass production. As each of these parameters may be modified by appropriate drugs, the theory developed in this paper may guide both prognosis and the development of new therapies for arterial pathologies such as aneurysms.

Computational model of matrix remodeling and entrenchment in the free-floating fibroblast-populated collagen lattice

Tissue equivalents represent excellent model systems for elucidating principles of mechanobiology and for exploring methods to improve the functionality of tissue-engineered constructs. The simplest tissue equivalent is the free-floating fibroblast-populated collagen lattice. Although introduced over 30 years ago, the associated mechanics of the cell-mediated compaction of this lattice was only recently analyzed in detail. The goal of this paper was to build on this recent stress analysis by developing a computational model of the evolving geometry, regionally varying material properties and cell stresses, and overall residual stress fields during the first two days of compaction. Baseline results were found to agree well with most experimental observations, namely evolving changes in radius, thickness, and material symmetry, yet hypothesis testing revealed aspects of the mechanobiology that require more experimental attention. Given the generality of the proposed framework, we submit that modifications and refinements can be used to study many similar systems and thereby help guide future experiments.

Evolving anisotropy and degree of elastolytic insult in abdominal aortic aneurysms: potential clinical relevance?

Accurately estimating patient-specific rupture risk remains a primary challenge in timing interventions for abdominal aortic aneurysms (AAAs). By re-analyzing published biaxial mechanical testing data from surgically repaired human AAAs, material anisotropy emerged as a potentially important determinant of patient-specific lesion progression. That is, based on a new classification scheme, we discovered that anisotropic aneurysmal specimens correlated with increased patient age at surgery when compared with more isotropic specimens (79.7 vs. 70.9 years, p<0.002), despite no significant difference in maximum diameter. Furthermore, using an idealized axisymmetric, finite-element growth and remodeling model of AAA progression, we found that both the initial axial extent of elastin loss and ongoing damage to elastin in the shoulder region of the AAA directly affected the degree of anisotropy as the lesion evolved, with more extensive insults increasing the anisotropy. This effect appeared to be mediated by alterations in axial loading and subsequent differences in orientation of deposited collagen fibers. While the observed increased age before surgical intervention may suggest a potential benefit of anisotropic remodeling, future biaxial tests coupled with pre-surgical data on expansion rates and detailed theoretical analyses of the biostability of a lesion as a function of anisotropy will be required to verify its clinical relevance to patient-specific rupture risk.

A microstructurally motivated model of arterial wall mechanics with mechanobiological implications

Through mechanobiological control of the extracellular matrix, and hence local stiffness, smooth muscle cells of the media and fibroblasts of the adventitia play important roles in arterial homeostasis, including adaptations to altered hemodynamics, injury, and disease. We present a new approach to model arterial wall mechanics that seeks to define better the mechanical environments of the media and adventitia while avoiding the common prescription of a traction-free reference configuration. Specifically, we employ the concept of constituent-specific deposition stretches from the growth and remodeling literature and define a homeostatic state at physiologic pressure and axial stretch that serves as a convenient biologically and clinically relevant reference configuration. Information from histology and multiphoton imaging is then used to prescribe structurally motivated constitutive relations for a bi-layered model of the wall. The utility of this approach is demonstrated by describing in vitro measured biaxial pressure-diameter and axial force-length responses of murine carotid arteries and predicting the associated intact and radially cut traction-free configurations. The latter provides a unique validation while confirming that this constrained mixture approach naturally recovers estimates of residual stresses, which are fundamental to wall mechanics, without the usual need to prescribe an opening angle that is only defined conveniently on cylindrical geometries and cannot be measured in vivo. Among other findings, the model suggests that medial and adventitial stresses can be nearly uniform at physiologic loads, albeit at separate levels, and that the adventitia bears increasingly more load at supra-physiologic pressures while protecting the media from excessive stresses.

Computational model of the in vivo development of a tissue engineered vein from an implanted polymeric construct

Advances in vascular tissue engineering have been tremendous over the past 15 years, yet there remains a need to optimize current constructs to achieve vessels having true growth potential. Toward this end, it has been suggested that computational models may help hasten this process by enabling time-efficient parametric studies that can reduce the experimental search space. In this paper, we present a first generation computational model for describing the in vivo development of a tissue engineered vein from an implanted polymeric scaffold. The model was motivated by our recent data on the evolution of mechanical properties and microstructural composition over 24 weeks in a mouse inferior vena cava interposition graft. It is shown that these data can be captured well by including both an early inflammatory-mediated and a subsequent mechano-mediated production of extracellular matrix. There remains a pressing need, however, for more data to inform the development of next generation models, particularly the precise transition from the inflammatory to the mechanobiological dominated production of matrix having functional capability.

Biochemomechanics of intraluminal thrombus in abdominal aortic aneurysms

Most computational models of abdominal aortic aneurysms address either the hemodynamics within the lesion or the mechanics of the wall. More recently, however, some models have appropriately begun to account for the evolving mechanics of the wall in response to the changing hemodynamic loads. Collectively, this large body of work has provided tremendous insight into this life-threatening condition and has provided important guidance for current research. Nevertheless, there has yet to be a comprehensive model that addresses the mechanobiology, biochemistry, and biomechanics of thrombus-laden abdominal aortic aneurysms. That is, there is a pressing need to include effects of the hemodynamics on both the development of the nearly ubiquitous intraluminal thrombus and the evolving mechanics of the wall, which depends in part on biochemical effects of the adjacent thrombus. Indeed, there is increasing evidence that intraluminal thrombus in abdominal aortic aneurysms is biologically active and should not be treated as homogeneous inert material. In this review paper, we bring together diverse findings from the literature to encourage next generation models that account for the biochemomechanics of growth and remodeling in patient-specific, thrombus-laden abdominal aortic aneurysms.

A finite element-based constrained mixture implementation for arterial growth, remodeling, and adaptation: theory and numerical verification

We implemented a constrained mixture model of arterial growth and remodeling in a nonlinear finite element framework to facilitate numerical analyses of diverse cases of arterial adaptation and maladaptation, including disease progression, resulting in complex evolving geometries and compositions. This model enables hypothesis testing by predicting consequences of postulated characteristics of cell and matrix turnover, including evolving quantities and orientations of fibrillar constituents and nonhomogenous degradation of elastin or loss of smooth muscle function. The nonlinear finite element formulation is general within the context of arterial mechanics, but we restricted our present numerical verification to cylindrical geometries to allow comparisons with prior results for two special cases: uniform transmural changes in mass and differential growth and remodeling within a two-layered cylindrical model of the human aorta. The present finite element model recovers the results of these simplified semi-inverse analyses with good agreement.

Biaxial mechanical properties of the inferior vena cava in C57BL/6 and CB-17 SCID/bg mice

Multiple murine models have proven useful in studying the natural history of neovessel development in the tissue engineering of vascular grafts. Nevertheless, to better understand longitudinal changes in the biomechanics of such neovessels, we must first quantify native tissue structure and properties. In this paper, we present the first biaxial mechanical data for, and nonlinear constitutive modeling of, &QJ;the inferior vena cava from two models used in tissue engineering: wild-type C57BL/6 and immunodeficient CB-17 SCID/bg mice. Results show that inferior vena cava from the latter are significantly stiffer in the circumferential direction, both materially (as assessed by a stored energy function) and structurally (as assessed by the compliance), despite a lower intramural content of fibrillar collagen and similar wall thickness. Quantifying the natural history of neovessel development in different hosts could lead to increased insight into the mechanisms by which cells fashion and maintain extracellular matrix in order to match best the host stiffness while ensuring sufficient vascular integrity.

Biomechanical phenotyping of central arteries in health and disease: advantages of and methods for murine models

The stiffness and structural integrity of the arterial wall depends primarily on the organization of the extracellular matrix and the cells that fashion and maintain this matrix. Fundamental to the latter is a delicate balance in the continuous production and removal of structural constituents and the mechanical state in which such turnover occurs. Perturbations in this balance due to genetic mutations, altered hemodynamics, or pathological processes result in diverse vascular phenotypes, many of which have yet to be well characterized biomechanically. In this paper, we emphasize the particular need to understand regional variations in the biaxial biomechanical properties of central arteries in health and disease and, in addition, the need for standardization in the associated biaxial testing and quantification. As an example of possible experimental methods, we summarize testing protocols that have evolved in our laboratory over the past 8 years. Moreover, we note advantages of a four fiber family stress-stretch relation for quantifying passive biaxial behaviors, the use of stored energy as a convenient scalar metric of the associated material stiffness, and the utility of appropriate linearizations of the nonlinear, anisotropic relations both for purposes of comparison across laboratories and to inform computational fluid-solid-interaction models. We conclude that, notwithstanding prior advances, there remain many opportunities to advance our understanding of arterial mechanics and mechanobiology, particularly via the diverse genetic, pharmacological, and surgical models that are, or soon will be, available in the mouse.

Parametric study of effects of collagen turnover on the natural history of abdominal aortic aneurysms

Abdominal aortic aneurysms (AAAs) are characterized by significant changes in the architecture of the aortic wall, notably, loss of functional elastin and smooth muscle. Because collagen is the principal remaining load-bearing constituent of the aneurysmal wall, its turnover must play a fundamental role in the natural history of the lesion. Nevertheless, detailed investigations of the effects of different aspects of collagen turnover on AAA development are lacking. A finite-element membrane model of the growth and remodelling of idealized AAAs was thus used to investigate parametrically four of the primary aspects of collagen turnover: rates of production, half-life, deposition stretch (prestretch) and material stiffness. The predicted rates of aneurysmal expansion and spatio-temporal changes in wall thickness, biaxial stresses and maximum collagen fibre stretch at the apex of the lesion depended strongly on all four factors, as did the predicted clinical endpoints (i.e. arrest, progressive expansion or rupture). Collagen turnover also affected the axial expansion, largely due to mechanical changes within the shoulder region of the lesion. We submit, therefore, that assessment of rupture risk could be improved by future experiments that delineate and quantify different aspects of patient-specific collagen turnover and that such understanding could lead to new targeted therapeutics.

Differential progressive remodeling of coronary and cerebral arteries and arterioles in an aortic coarctation model of hypertension

Objectives: Effects of hypertension on arteries and arterioles often manifest first as a thickened wall, with associated changes in passive material properties (e.g., stiffness) or function (e.g., cellular phenotype, synthesis and removal rates, and vasomotor responsiveness). Less is known, however, regarding the relative evolution of such changes in vessels from different vascular beds. Methods: We used an aortic coarctation model of hypertension in the mini-pig to elucidate spatiotemporal changes in geometry and wall composition (including layer-specific thicknesses as well as presence of collagen, elastin, smooth muscle, endothelial, macrophage, and hematopoietic cells) in three different arterial beds, specifically aortic, cerebral, and coronary, and vasodilator function in two different arteriolar beds, the cerebral and coronary. Results: Marked geometric and structural changes occurred in the thoracic aorta and left anterior descending coronary artery within 2 weeks of the establishment of hypertension and continued to increase over the 8-week study period. In contrast, no significant changes were observed in the middle cerebral arteries from the same animals. Consistent with these differential findings at the arterial level, we also found a diminished nitric oxide-mediated dilation to adenosine at 8 weeks of hypertension in coronary arterioles, but not cerebral arterioles. Conclusion: These findings, coupled with the observation that temporal changes in wall constituents and the presence of macrophages differed significantly between the thoracic aorta and coronary arteries, confirm a strong differential progressive remodeling within different vascular beds. Taken together, these results suggest a spatiotemporal progression of vascular remodeling, beginning first in large elastic arteries and delayed in distal vessels.

Continuum mixture models of biological growth and remodeling: past successes and future opportunities

Biological growth processes involve mass exchanges that increase, decrease, or replace material that constitutes cells, tissues, and organs. In most cases, such exchanges alter the structural makeup of the material and consequently affect associated mechanobiological responses to applied loads. Given that the type and extent of changes in structural integrity depend on the different constituents involved (e.g., particular cytoskeletal or extracellular matrix proteins), the continuum theory of mixtures is ideally suited to model the mechanics of growth and remodeling. The goal of this review is twofold: first, to highlight a few illustrative examples that show diverse applications of mixture theory to describe biological growth and/or remodeling; second, to identify some open problems in the fields of modeling soft-tissue growth and remodeling.

Possible mechanical roles of glycosaminoglycans in thoracic aortic dissection and associations with dysregulated transforming growth factor-β

BACKGROUND

Four distinguishing histopathological characteristics of thoracic aortic aneurysms and dissections (TAADs) are the fragmentation or degradation of elastic fibers, loss of smooth muscle, pooling of glycosaminoglycans, and remodeling of fibrillar collagens. Of these, pooling of glycosaminoglycans appears to be unique to these lesions.

METHODS

This review acknowledges the importance of dysregulated transforming growth factor-β (TGF-β) in TAADs and offers a complementary hypothesis that increased TGF-β could contribute to the accumulation of glycosaminoglycans in the media of the proximal thoracic aorta. Regardless, observed pools of glycosaminoglycans could decrease tensile strength, cause stress concentrations, and increase intralamellar swelling pressure, all of which could initiate local delaminations that could subsequently propagate as dissections and result in a false lumen or rupture.

CONCLUSIONS

There is a pressing need to investigate potential mechanical as well as biological consequences of accumulated glycosaminoglycans in TAADs and to elucidate responsible signaling pathways, with particular attention to synthetic cells of nonmesodermal lineage. Such research could provide insight into the mechanisms of dissection and the seemingly paradoxical role of the over-expression of a cytokine that is typically associated with fibrosis but is implicated in a degenerative disease of the aorta that can result in a catastrophic mechanical failure.

Importance of initial aortic properties on the evolving regional anisotropy, stiffness and wall thickness of human abdominal aortic aneurysms

Complementary advances in medical imaging, vascular biology and biomechanics promise to enable computational modelling of abdominal aortic aneurysms to play increasingly important roles in clinical decision processes. Using a finite-element-based growth and remodelling model of evolving aneurysm geometry and material properties, we show that regional variations in material anisotropy, stiffness and wall thickness should be expected to arise naturally and thus should be included in analyses of aneurysmal enlargement or wall stress. In addition, by initiating the model from best-fit material parameters estimated for non-aneurysmal aortas from different subjects, we show that the initial state of the aorta may influence strongly the subsequent rate of enlargement, wall thickness, mechanical behaviour and thus stress in the lesion. We submit, therefore, that clinically reliable modelling of the enlargement and overall rupture-potential of aneurysms may require both a better understanding of the mechanobiological processes that govern the evolution of these lesions and new methods of determining the patient-specific state of the pre-aneurysmal aorta (or correlation to currently unaffected portions thereof) through knowledge of demographics, comorbidities, lifestyle, genetics and future non-invasive or minimally invasive tests.

Mechanics, mechanobiology, and modeling of human abdominal aorta and aneurysms

Biomechanical factors play fundamental roles in the natural history of abdominal aortic aneurysms (AAAs) and their responses to treatment. Advances during the past two decades have increased our understanding of the mechanics and biology of the human abdominal aorta and AAAs, yet there remains a pressing need for considerable new data and resulting patient-specific computational models that can better describe the current status of a lesion and better predict the evolution of lesion geometry, composition, and material properties and thereby improve interventional planning. In this paper, we briefly review data on the structure and function of the human abdominal aorta and aneurysmal wall, past models of the mechanics, and recent growth and remodeling models. We conclude by identifying open problems that we hope will motivate studies to improve our computational modeling and thus general understanding of AAAs.