High calcium to phosphorus ratio impairs growth and bone mineralization in Pekin ducklings

Two experiments were conducted to investigate the effect of high dietary calcium (Ca) level on growth performance, Ca and phosphorus (P) metabolism, and nutrient utilization in ducklings subjected to normal and low P levels in diets. A completely randomized design was used with a factorial arrangement of 2 total dietary P levels [normal-P (0.60%) and low-P (0.45%) groups] × 4 dietary Ca levels [low-Ca (0.55%), normal-Ca (0.75%), medium-Ca (0.95%) and high-Ca (1.15%) groups)]. Compared to normal-P group, low-P group had lower (P < 0.05) final body weight (BW), average daily gain (ADG), and average daily feed intake (ADFI) and reduced (P < 0.05) serum Ca and P levels, bone Ca, P, and ash content, and bone mineral density in ducklings during the starter period. Under the low-P group, birds from high-Ca group had lower (P < 0.05) final BW, ADG, ADFI, bone ash content, bone mineral density, and the utilization of energy, Ca, and P than those from low-Ca, normal-Ca, and medium-Ca groups. Our results indicate that high-Ca diet induced greater growth suppression and bone mineralization loss in ducklings fed a low-P diet. The aggravated negative effect of high dietary Ca level with a low P level might be related to the elevated serum alkaline phosphatase activity and the reduced utilization of energy, Ca, and P.

[The relationship between IL-4 and trace elements in patients with allergic rhinitis of hui and han populations in Ningxia]

Objective: To examine the relationship between trace elements and IL-4 in patients with allergic rhinitis(AR).Method:According to the inclusion and exclusion criteria, a total of 260 cases in AR group(130 hui cases, 130 han cases),and 260 cases in normal control group(130 hui cases, 130 han cases) were recruited in this study. The concentrations of IL-4 were detected by enzyme linked immunosorbent assay(ELISA), the contents of Zn, Mn, Ni, Se and Fe were determined by inductively coupled plasma atomic emission spectrometry(ICP-AES), and the correlation between the trace elements and IL-4 were also analyzed.Result:IL-4 levels in serum of both hui and han AR patients were higher than those in control group(P <0.05). Contents of serum Zn and Se in hui AR patients were lower than those in control group(P <0.05), Ni content was higher than that in control group(P <0.05);Zn level in serum of han AR cases was lower than that in control group,Ni content was higher than that in control group (P <0.05).The serum IL-4 level in AR group was positively correlated with Ni(P <0.01,r=0.671), and negatively correlated with Zn(P <0.01, r=-0.819).Conclusion:We demonstrated that there are significant correlations between IL-4 and Zn,Ni in the serum of patients with AR in Ningxia hui and han population. It indicates that trace elements are involved in the occurrence and development of AR, and may as a therauptic target of AR.

USEAQ: Ultra-fast Superpixel Extraction via Adaptive Sampling from Quantized Regions

We present a novel and highly efficient superpixel extraction method called USEAQ to generate regular and compact superpixels in an image. To reduce the computational cost of iterative optimization procedures adopted in most recent approaches, the proposed USEAQ for superpixel generation works in a one-pass fashion. It firstly performs joint spatial and color quantizations and groups pixels into regions. It then takes into account the variations between regions, and adaptively samples one or a few superpixel candidates for each region. It finally employs maximum a posteriori (MAP) estimation to assign pixels to the most spatially consistent and perceptually similar superpixels. It turns out that the proposed USEAQ is quite efficient, and the extracted superpixels can precisely adhere to boundaries of objects. Experimental results show that USEAQ achieves better or equivalent performance compared to the stateof- the-art superpixel extraction approaches in terms of boundary recall, undersegmentation error, achievable segmentation accuracy, the average miss rate, average undersegmentation error, and average unexplained variation, and it is significantly faster than these approaches.

Aortic remodelling after thoracic endovascular aortic repair for acute and subacute type B aortic dissection

BACKGROUND

Thoracic endovascular aortic repair (TEVAR) in the current era has gained widespread acceptance as the modality of choice for the treatment of complicated aortic dissection (AD). However, reports on clinical results of TEVAR treatment of AD patients are mainly comparisons and analyses of results between patients in the acute and chronic phases, few reports have described the postoperative aortic remodelling of patients with subacute AD after TEVAR. The aim of this study was to investigate aortic remodelling after TEVAR in acute and subacute Stanford type B AD patients.

METHODS

The clinical data of 38 Stanford type B AD patients who received TEVAR treatment in our hospital between July 2012 and December 2017 were retrospectively analysed. The maximum diameters of the aorta, the mean diameters of the true lumens (TLs) and the false lumens (FLs) of the aorta in the dissection range before and after TEVAR treatment were measured. All diameters between different groups or in the same group before and after therapy were compared using nonparametric tests. Count data were examined using the χ² test.

RESULTS

The 38 patients were 31.0-82.0 years old with a mean age of 57.0±11.0 years, including 31 men and 7 women, with 22 patients in the acute phase and 16 patients in the subacute phase. Among the 38 patients included in this study, 7 (18.4%) patients had endoleaks after treatment. No perioperative deaths occurred. Analyses of computed tomography angiography measurement results showed that the baseline maximum diameters of the aorta, TLs and FLs before TEVAR between the acute and subacute groups were not significantly different (P=0.193, P=0.301 and P=0.067, respectively). After TEVAR treatment, the maximum diameters of the aorta and the diameters of the FLs were different between the two groups (P=0.005 and P=0.012), but the diameters of the TLs were not (P=0.069). The diameters of the TLs increased, and those of FLs decreased significantly in the acute and subacute groups after TEVAR (P<0.001, P<0.001, P<0.001 and P=0.007, respectively); the maximum diameters of the aorta decreased significantly in the acute group (P<0.001), but they did not change obviously in the subacute group (P=0.121).

CONCLUSIONS

TEVAR offers satisfactory results for the treatment of type B AD. Acute AD may be associated with better aortic remodelling compared to subacute AD after TEVAR.

Techno-economic and resource analysis of hydroprocessed renewable jet fuel

BACKGROUND

Biomass-derived jet fuel is an alternative jet fuel (AJF) showing promise of reducing the dependence on fossil fuel and greenhouse gas emissions. Hydroprocessed esters and fatty acids (HEFA) concept is also known as one of the pathways for producing bio jet fuel. HEFA fuel was approved by the American Society for Testing and Materials in 2011, and can be blended up to 50% with conventional jet fuel. Since then, several HEFA economic and life-cycle assessments have been published in literature. However, there have been limited analyses on feedstock availability, composition, and their impact on hydrocarbon yield (particularly jet blendstock yield) and overall process economics.

RESULTS

This study examines over 20 oil feedstocks, their geographic distribution and production levels, oil yield, prices, and chemical composition. The results of our compositional analysis indicate that most oils contain mainly C₁₆ and C₁₈ fatty acids except pennycress, yellow grease, and mustard, which contain higher values and thus would require hydrocracking to improve jet fuel production. Coconut oil has a large content of shorter carbon fatty acids, making it a good feedstock candidate for renewable gasoline instead of jet substitutes' production. Techno-economic analysis (TEA) was performed for five selected oil feedstocks-camelina, pennycress, jatropha, castor bean, and yellow grease-using the HEFA process concept.

CONCLUSION

The resource analysis indicates that oil crops currently grown in the United States (namely soybean) have relatively low oil yield when compared to oil crops grown in other parts of the world, such as palm, coconut, and jatropha. Also, non-terrestrial oil sources, such as animal fats and greases, have relatively lower prices than terrestrial oil crops. The minimum jet fuel selling price for these five resources ranges between $3.8 and $11.0 per gallon. The results of our TEA and resource studies indicate the key cost drivers for a biorefinery converting oil to jet hydrocarbons are as follows: oil price, conversion plant capacity, fatty acid profile, addition of hydrocracker, and type of hydroprocessing catalysts.

Fluoride-sulfophosphate glasses as hosts for broadband optical amplification through transition metal activators

Unusually stable multi-anion glasses of the fluoride-sulfophosphate type (FPS) are introduced as a new host material for optically active cation species. Despite a notoriously low polymerization grade, anion mixing in this glass system enables facile manufacture of bulk or fiber devices which combine several advantages of fluoride and phosphate glasses while using the stabilizing effect of sulfate additions. Using the example of chromium doping, we demonstrate broad red photoluminescence at 734 nm and inhomogeneous broadening of the R-line at 694 nm, originating from the ⁴T₂ → ⁴A₂ and ²E → ⁴A₂ transitions of Cr³⁺, respectively. The luminescence mechanism is further analyzed on the basis of the corresponding Tanabe-Sugano diagram. Tailored through chemical composition, internally nucleated precipitation of a nanocrystalline fluoride phase enables switching between high-field and low-field configurations of the Cr³⁺ ion, resulting in the specific emission properties and setting the path towards FPS-based optical devices.

Magnetic induction of hyperthermia by a modified self-learning fuzzy temperature controller

The aim of this study involved developing a temperature controller for magnetic induction hyperthermia (MIH). A closed-loop controller was applied to track a reference model to guarantee a desired temperature response. The MIH system generated an alternating magnetic field to heat a high magnetic permeability material. This wireless induction heating had few side effects when it was extensively applied to cancer treatment. The effects of hyperthermia strongly depend on the precise control of temperature. However, during the treatment process, the control performance is degraded due to severe perturbations and parameter variations. In this study, a modified self-learning fuzzy logic controller (SLFLC) with a gain tuning mechanism was implemented to obtain high control performance in a wide range of treatment situations. This implementation was performed by appropriately altering the output scaling factor of a fuzzy inverse model to adjust the control rules. In this study, the proposed SLFLC was compared to the classical self-tuning fuzzy logic controller and fuzzy model reference learning control. Additionally, the proposed SLFLC was verified by conducting in vitro experiments with porcine liver. The experimental results indicated that the proposed controller showed greater robustness and excellent adaptability with respect to the temperature control of the MIH system.

Biological mechanism of post-herpetic neuralgia: Evidence from multiple patho-psychophysiological measures

BACKGROUND

Post-herpetic neuralgia (PHN), which develops after the resolution of a herpes zoster eruption, is an exceptionally drug-resistant neuropathic pain. The unsatisfactory management of PHN partly results from the difficulty in dissecting out its contributing factors due to the complexity of PHN mechanism.

METHODS

Here, to elaborate our understanding of the PHN mechanism and to establish a basis for effective therapeutic strategies, we comprehensively investigated the contributions of multiple factors to PHN severity.

RESULTS

Based on the comparison of somatosensory detection thresholds (C, Aδ and Aβ fibre thresholds) between affected and unaffected sides, 16 PHN patients with significant sensory deficits and 13 PHN patients without significant sensory deficits were identified and assigned to different groups. The different extents of lesions in the nociceptive system between patients with and without sensory deficits were confirmed using laser-evoked brain responses. Moreover, patients with sensory deficits had more severe pain and psychological disorders, e.g. anxiety and depression. Importantly, chronic pain severity was significantly influenced by various psychophysiological factors (sleep disturbances, psychological disorders and hypothalamic-pituitary-adrenal axis dysfunction) for patients with sensory deficits.

CONCLUSIONS

Our findings demonstrated the contribution of multiple patho-psychophysiological factors to PHN severity, which could help establish a basis for the development of a rational, patient-centred therapeutic strategy.

SIGNIFICANCE

This study revealed the contribution of multiple patho-psychophysiological factors to PHN severity, which expanded our understanding of the underlying PHN mechanism, and helped develop a rational, patient-centred therapeutic strategy targeting towards the corresponding etiology and psychophysiological disorders for individual patient.

Design of a heart rate controller for treadmill exercise using a recurrent fuzzy neural network

BACKGROUND AND OBJECTIVE

In this study, we developed a computer controlled treadmill system using a recurrent fuzzy neural network heart rate controller (RFNNHRC). Treadmill speeds and inclines were controlled by corresponding control servo motors. The RFNNHRC was used to generate the control signals to automatically control treadmill speed and incline to minimize the user heart rate deviations from a preset profile.

METHODS

The RFNNHRC combines a fuzzy reasoning capability to accommodate uncertain information and an artificial recurrent neural network learning process that corrects for treadmill system nonlinearities and uncertainties. Treadmill speeds and inclines are controlled by the RFNNHRC to achieve minimal heart rate deviation from a pre-set profile using adjustable parameters and an on-line learning algorithm that provides robust performance against parameter variations. The on-line learning algorithm of RFNNHRC was developed and implemented using a dsPIC 30F4011 DSP.

RESULTS

Application of the proposed control scheme to heart rate responses of runners resulted in smaller fluctuations than those produced by using proportional integra control, and treadmill speeds and inclines were smoother. The present experiments demonstrate improved heart rate tracking performance with the proposed control scheme.

CONCLUSIONS

The RFNNHRC scheme with adjustable parameters and an on-line learning algorithm was applied to a computer controlled treadmill system with heart rate control during treadmill exercise. Novel RFNNHRC structure and controller stability analyses were introduced. The RFNNHRC were tuned using a Lyapunov function to ensure system stability. The superior heart rate control with the proposed RFNNHRC scheme was demonstrated with various pre-set heart rates.

Self-Assembled Epitaxial Core-Shell Nanocrystals with Tunable Magnetic Anisotropy

Epitaxial core-shell CoO-CoFe2 O4 nanocrystals are fabricated by using pulsed laser deposition with the aid of melted material (Bi2 O3 ) addition and suitable lattice mismatch provided by substrates (SrTiO3 ). Well aligned orientations among nanocrystals and reversible core-shell sequence reveal tunable magnetic anisotropy. The interfacial coupling between core and shell further engineers the nanocrystal functionality.

Does school health and home economics education influence adults' food knowledge?

Home economics and health teachers are to be found in many parts of the world. They teach students about food in relation to its nutritional, safety and environmental properties. The effects of such teaching might be expected to be reflected in the food knowledge of adults who have undertaken school education in these areas. This study examined the food knowledge associations of school home economics and health education among Australian adults. Two separate online surveys were conducted nationwide among 2022 (November 2011) and 2146 Australian adults (November-December 2012). True/false and multiple choice questions in both surveys were used to assess nutrition, food safety and environmental knowledge. Knowledge scores were constructed and compared against respondents' experience of school health or home economics education via multiple regression analyses. The results from both studies showed that home economics (and similar) education was associated with higher levels of food knowledge among several age groups. The associations of home economics education with food knowledge differed across several Australian states and recall of home economics themes differed across the age groups. These findings suggest that home economics education may bring about long-lasting learning of food knowledge. Further research is required, however, to confirm the findings and to test the causal influence of home economics education on adults' food knowledge.

Atomic-layer-deposited silver and dielectric nanostructures for plasmonic enhancement of Raman scattering from nanoscale ultrathin films

Plasmonic silver nanostructures and a precise ZnO cover layer prepared by capacitively coupled plasma atomic layer deposition (ALD) were exploited to enhance the Raman scattering from nanoscale ultrathin films on a Si substrate. The plasmonic activity was supported by a nanostructured Ag (nano-Ag) layer, and a ZnO cover layer was introduced upon the nano-Ag layer to spectrally tailor the localized surface plasmon resonance to coincide with the laser excitation wavelength. Because of the optimized dielectric environment provided by the precise growth of ZnO cover layer using ALD, the intensity of Raman scattering from nanoscale ultrathin films was significantly enhanced by an additional order of magnitude, leading to the observation of the monoclinic and tetragonal phases in the nanoscale ZrO2 high-K gate dielectric as thin as ∼6 nm on Si substrate. The excellent agreement between the finite-difference time-domain simulation and experimental measurement further confirms the so-called [absolute value]E(->)[absolute value](4) dependence of the surface-enhanced Raman scattering. This technique of plasmonic enhancement of Raman spectroscopy, assisted by the nano-Ag layer and optimized dielectric environment prepared by ALD, can be applied to characterize the structures of ultrathin films in a variety of nanoscale materials and devices, even on a Si substrate with overwhelming Raman background.

Efficiency Enhancement of Nanotextured Black Silicon Solar Cells Using Al2O3/TiO2 Dual-Layer Passivation Stack Prepared by Atomic Layer Deposition

In this study, efficient nanotextured black silicon (NBSi) solar cells composed of silicon nanowire arrays and an Al2O3/TiO2 dual-layer passivation stack on the n(+) emitter were fabricated. The highly conformal Al2O3 and TiO2 surface passivation layers were deposited on the high-aspect-ratio surface of the NBSi wafers using atomic layer deposition. Instead of the single Al2O3 passivation layer with a negative oxide charge density, the Al2O3/TiO2 dual-layer passivation stack treated with forming gas annealing provides a high positive oxide charge density and a low interfacial state density, which are essential for the effective field-effect and chemical passivation of the n(+) emitter. In addition, the Al2O3/TiO2 dual-layer passivation stack suppresses the total reflectance over a broad range of wavelengths (400-1000 nm). Therefore, with the Al2O3/TiO2 dual-layer passivation stack, the short-circuit current density and efficiency of the NBSi solar cell were increased by 11% and 20%, respectively. In conclusion, a high efficiency of 18.5% was achieved with the NBSi solar cells by using the n(+)-emitter/p-base structure passivated with the Al2O3/TiO2 stack.

MiR-124 suppresses cell motility and adhesion by targeting talin 1 in prostate cancer cells

Background

MicroRNA is a type of endogenous non-coding RNA implicated in various cellular processes, and has been intensely investigated in the field of cancer research for many years. Here, we investigated the functions and mechanisms of miR-124 in prostate cancer, which is a putative tumor suppressor reported in many carcinomas.

Methods

Using bioinformatics, talin 1 was indicated as a potential target of miR-124. We examined the expression levels of miR-124 and talin 1 in tissue specimens and cell lines. To explore the relationship between miR-124 and talin 1, miR-124 mimics, miR-124 inhibitors, and talin 1 small interfering RNA (siRNA) were transiently transfected into cancer cell lines, followed by analysis using luciferase reporter assays. Next, to investigate the functions of miR-124 in prostate cancer, we performed cell attachment, migration, and invasion assays. A rescue experiment was also conducted to demonstrate whether miR-124 suppressed cell adhesion and motility by targeting talin 1. Finally, we examined the related signaling pathways of miR-124 and talin 1.

Results

MiR-124 was down-regulated in prostate cancer specimens and cell lines, while talin 1 was over-expressed in prostate cancer specimens and cell lines. These results showed an inverse correlation of miR-124 and talin 1 expression. Similar to talin 1 siRNA, overexpression of miR-124 by transient transfection of mimics led to a significant decrease in talin 1 levels. Luciferase report assays showed that the seed sequence of the talin 1 3’-untranslated region was a target of miR-124. Functional investigations revealed anti-attachment, anti-migration, and invasion-promoting effects of miR-124 in prostate cancer cells. The rescue experiment confirmed that miR-124 exerted its biological functions by targeting talin 1. Finally, we found that miR-124 and talin 1 impaired cellular adhesion and motility through integrins and the focal adhesion kinase/Akt pathway.

Conclusions

Our study demonstrated biological roles and the related mechanism of miR-124 in prostate cancer. The results indicate that talin 1 is very likely a novel player in the anti-metastatic signaling network of miR-124. By down-regulation of talin 1, miR-124 impairs the adhesion, migration, and invasion of prostate cancer cells.

Construction of a novel porcine circovirus type 2 infectious clone as a basis for the development of a PCV2 iDNA vaccine

Porcine circovirus-associated disease is a highly contagious disease that has significant economic consequences. The disease is prevalent in many countries and regions. To generate a genetic marker strain of PCV2, a Sal I restriction enzyme site was inserted into the PCV2 clone as a genetic marker by applying iDNA infectious clone technology. The iDNA represents plasmids that encode the full-length DNA genome of PCV2 assembled in a pcDNA3.1-based vectors. The mutant PCV2 was rescued by transfecting an infectious clone into PK-15 cells and was characterised by an immunoperoxidase monolayer assay (IPMA). The viral genome could be differentiated from the wild-type parent by PCR and restriction fragment length polymorphism (PCR-RFLP). Kunming mice were inoculated with the PCV2 infectious clone or rescued virus via intranasal and intraperitoneal routes. Seroconversion to PCV2-specific antibody appeared in the majority of mice from the two inoculated groups at 7 days postinoculation (DPI), and the specific antibody level was steady for at least 42 days. Viraemia, beginning at 7 DPI and lasting 4 weeks, was detected in the majority of the pigs from the two inoculated groups. The animal experiments revealed that the PCV2 infectious clone and rescued virus both could replicate in mice and induce mice to generate anti-PCV2 antibodies. The infectious clones of PCV2 will be useful for further research investigating a potential tractable iDNA vaccine by reverse genetics technology for attenuated virulance.

Size- and support-dependent evolution of the oxidation state and structure by oxidation of subnanometer cobalt clusters

Size-selected subnanometer cobalt clusters with 4, 7, and 27 cobalt atoms supported on amorphous alumina and ultrananocrystalline diamond (UNCD) surfaces were oxidized after exposure to ambient air. Grazing incidence X-ray absorption near-edge spectroscopy (GIXANES) and near-edge X-ray absorption fine structure (NEXAFS) were used to characterize the clusters revealed a strong dependency of the oxidation state and structure of the clusters on the surface. A dominant Co(2+) phase was identified in all samples. However, XANES analysis of cobalt clusters on UNCD showed that ∼10% fraction of a Co(0) phase was identified for all three cluster sizes and about 30 and 12% fraction of a Co(3+) phase in 4, 7, and 27 atom clusters, respectively. In the alumina-supported clusters, the dominating Co(2+) component was attributed to a cobalt aluminate, indicative of a very strong binding to the support. NEXAFS showed that in addition to strong binding of the clusters to alumina, their structure to a great extent follows the tetrahedral morphology of the support. All supported clusters were found to be resistant to agglomeration when exposed to reactive gases at elevated temperatures and atmospheric pressure.

Evaluation of SWI in children with sickle cell disease

BACKGROUND AND PURPOSE

SWI is a powerful tool for imaging of the cerebral venous system. The SWI venous contrast is affected by blood flow, which may be altered in sickle cell disease. In this study, we characterized SWI venous contrast in patients with sickle cell disease and healthy control participants and examined the relationships among SWI venous contrast, and hematologic variables in the group with sickle cell disease.

MATERIALS AND METHODS

A retrospective review of MR imaging and hematologic variables from 21 patients with sickle cell disease and age- and sex-matched healthy control participants was performed. A Frangi vesselness filter was used to quantify the attenuation of visible veins from the SWI. The normalized visible venous volume was calculated for quantitative analysis of venous vessel conspicuity.

RESULTS

The normalized visible venous volume was significantly lower in the group with sickle cell disease vs the control group (P < .001). Normalized visible venous volume was not associated with hemoglobin, percent hemoglobin F, percent hemoglobin S, absolute reticulocyte count, or white blood cell count. A hypointense arterial signal on SWI was observed in 18 of the 21 patients with sickle cell disease and none of the 21 healthy control participants.

CONCLUSIONS

This study demonstrates the variable and significantly lower normalized visible venous volume in patients with sickle cell disease compared with healthy control participants. Decreased venous contrast in sickle cell disease may reflect abnormal cerebral blood flow, volume, velocity, or oxygenation. Quantitative analysis of SWI contrast may be useful for investigation of cerebrovascular pathology in patients with sickle cell disease, and as a tool to monitor therapies. However, future studies are needed to elucidate physiologic mechanisms of decreased venous conspicuity in sickle cell disease.

Enhancement of light emission from silicon by precisely tuning coupled localized surface plasmon resonance of a nanostructured platinum layer prepared by atomic layer deposition

Plasmonic enhancement of photoluminescence from bulk silicon was achieved by spectrally tailoring coupled localized surface plasmon resonance (LSPR) in the Al2O3 cover/nanostructured platinum (nano-Pt)/Al2O3 spacer/silicon multilayer structures prepared by atomic layer deposition (ALD). Agreement between the simulation and experimental data indicates that the plasmonic activity originates from absorption enhancement due to coupled LSPR. Because of the optimized dielectric environment deposited by ALD around the nano-Pt layer, absorption of the multilayer structure was enhanced by the precise tuning of coupled LSPR to coincide with the excitation wavelength. This accurate plasmonic multilayer structure grown by ALD with high precision, tunability, uniformity, and reproducibility can be further applied in efficient light-emitting devices.

Healthy eating norms and food consumption

BACKGROUND/OBJECTIVES

Beliefs about what people think they ought to eat to be healthy ('healthy eating norms (HENs)') may be important influences on food consumption. The purpose of this study was to examine the predictive roles of normative expectations and demographics, personal values, substance use behaviours and body weight on reported food consumption among middle-aged Australians.

SUBJECTS/METHODS

A questionnaire was administered by mail to a random sample of people aged 40 years and above, drawn from the Electoral Rolls in Victoria, Australia. Part of the questionnaire contained questions about the respondents' beliefs about what should they eat to be healthy, what actually they ate, their personal values, smoking and alcohol use, as well as self-reported heights and weights and demographic characteristics.

RESULTS

Respondents' reported food consumption did not match their HENs. Demographics, smoking, body mass index (BMI) and personal values, and HENs were associated with reported consumption but the relationships differed among men and women. Generally, high energy-dense, nutrition-poor (EDNP) food consumption was negatively associated with age. Fruit and vegetable HEN and consumption was positively linked to universalist values but negatively related to smoking status among men. In contrast in women, fruit and vegetable HENs were positively related to income and education while EDNP HEN was negatively associated with age and income but positively linked to body weight and power values.

CONCLUSIONS

Reported food consumption was associated with HEN, personal values, demographics, smoking and BMI through different pathways among men and women. The implications for nutrition promotion are discussed.

Surface passivation of efficient nanotextured black silicon solar cells using thermal atomic layer deposition

Efficient nanotextured black silicon solar cells passivated by an Al2O3 layer are demonstrated. The broadband antireflection of the nanotextured black silicon solar cells was provided by fabricating vertically aligned silicon nanowire (SiNW) arrays on the n(+) emitter. A highly conformal Al2O3 layer was deposited upon the SiNW arrays by the thermal atomic layer deposition (ALD) based on the multiple pulses scheme. The nanotextured black silicon wafer covered with the Al2O3 layer exhibited a low total reflectance of ∼1.5% in a broad spectrum from 400 to 800 nm. The Al2O3 passivation layer also contributes to the suppressed surface recombination, which was explored in terms of the chemical and field-effect passivation effects. An 8% increment of short-circuit current density and 10.3% enhancement of efficiency were achieved due to the ALD Al2O3 surface passivation and forming gas annealing. A high efficiency up to 18.2% was realized in the ALD Al2O3-passivated nanotextured black silicon solar cells.

Properties of disorder-engineered black titanium dioxide nanoparticles through hydrogenation

The recent discovery of “black” TiO₂ nanoparticles with visible and infrared absorption has triggered an explosion of interest in the application of TiO₂ in a diverse set of solar energy systems; however, what a black TiO₂ nanoparticle really is remains a mystery. Here we elucidate more properties and try to understand the inner workings of black TiO₂ nanoparticles with hydrogenated disorders in a surface layer surrounding a crystalline core. Contrary to traditional findings, Ti³⁺ here is not responsible for the visible and infrared absorption of black TiO₂, while there is evidence of mid-gap states above the valence band maximum due to the hydrogenated, engineered disorders. The hydrogen atoms, on the other hand, can undergo fast diffusion and exchange. The enhanced hydrogen mobility may be explained by the presence of the hydrogenated, disordered surface layer. This unique structure thus may give TiO₂, one of the most-studied oxide materials, a renewed potential.