n-Doping of Quantum Dots by Lithium Ion Intercalation

The optical properties of colloidal quantum dots (QDs) are controllable through introduction of excess electrons or holes into their delocalized bands. Crucial to robust and energy-efficient electronic doping of QDs is suitable charge compensation. Compensation by surface modification and substitutional impurities are however not sufficiently controllable to enable effective doping of QDs. This article describes electrochemical n-type doping of CdSe QDs where injected electrons are compensated by interstitial Li⁺ to form Li_xCdSe, x ≤ 0.3. n-type degenerate doping reversibly decreases absorption into the lowest-energy excitonic state of the QD, activates intraband optical transitions, and shifts the photoluminescence of the QD to higher energy. This work establishes electrochemical interstitial doping as a reversible and highly controllable method for tuning the optical properties of colloidal QDs.

Use of Chalcogenide-Semiconductor-Sensitized Titania to Directly Charge a Vanadium Redox Battery

Unmediated charging of a battery using solar radiation is a very attractive project of solar energy conversion and storage. In the present work, solar energy was converted into electricity using a photocatalytic fuel cell operating with a chalcogenide-semiconductor-sensitized nanoparticulate titania photoanode and an air-cathode functioning by oxygen reduction. This cell produced sufficient energy to directly charge a vanadium redox battery functioning with a VOSO₄ electrolyte and carbon paper electrodes. The whole system is characterized by ease of construction and simplicity of conception; therefore, it satisfies conditions for practical applications.

Periodic FTO IOs/CdS NRs/CdSe Clusters with Superior Light Scattering Ability for Improved Photoelectrochemical Performance

Periodic fluorine-doped tin oxide inverse opals (FTO IOs) grafted with CdS nanorods (NRs) and CdSe clusters are reported for improved photoelectrochemical (PEC) performance. This hierarchical photoanode is fabricated by a combination of dip-coating, hydrothermal reaction, and chemical bath deposition. The growth of 1D CdS NRs on the periodic walls of 3D FTO IOs forms a unique 3D/1D hierarchical structure, providing a sizeable specific surface area for the loading of CdSe clusters. Significantly, the periodic FTO IOs enable uniform light scattering while the abundant surrounded CdS NRs induce additional random light scattering, combining to give multiple light scattering within the complete hierarchical structure, significantly improving light-harvesting of CdS NRs and CdSe clusters. The high electron collection ability of FTO IOs and the CdS/CdSe heterojunction formation also contribute to the enhanced charge transport and separation. Due to the incorporation of these enhancement strategies in one hierarchical structure, FTO IOs/CdS NRs/CdSe clusters present an improved PEC performance. The photocurrent density of FTO IOs/CdS NRs/CdSe clusters at 1.23 V versus reversible hydrogen electrode reaches 9.2 mA cm^-2 , which is 1.43 times greater than that of CdS NRs/CdSe clusters and 3.83 times of CdS NRs.

Single and Double Electron Spin-Flip Raman Scattering in CdSe Colloidal Nanoplatelets

CdSe colloidal nanoplatelets are studied by spin-flip Raman scattering in magnetic fields up to 5 T. We find pronounced Raman lines shifted from the excitation laser energy by an electron Zeeman splitting. Their polarization selection rules correspond to those expected for scattering mediated by excitons interacting with resident electrons. Surprisingly, Raman signals shifted by twice the electron Zeeman splitting are also observed. The theoretical analysis and experimental dependences show that the mechanism responsible for the double flip involves two resident electrons interacting with a photoexcited exciton. Effects related to various orientations of the nanoplatelets in the ensemble and different orientations of the magnetic field are analyzed.

Visible-Light Activated Titania and Its Application to Photoelectrocatalytic Hydrogen Peroxide Production

Photoelectrochemical cells have been constructed with photoanodes based on mesoporous titania deposited on transparent electrodes and sensitized in the Visible by nanoparticulate CdS or CdS combined with CdSe. The cathode electrode was an air–breathing carbon cloth carrying nanoparticulate carbon. These cells functioned in the Photo Fuel Cell mode, i.e., without bias, simply by shining light on the photoanode. The cathode functionality was governed by a two-electron oxygen reduction, which led to formation of hydrogen peroxide. Thus, these devices were employed for photoelectrocatalytic hydrogen peroxide production. Two-compartment cells have been used, carrying different electrolytes in the photoanode and cathode compartments. Hydrogen peroxide production has been monitored by using various electrolytes in the cathode compartment. In the presence of NaHCO₃, the Faradaic efficiency for hydrogen peroxide production exceeded 100% due to a catalytic effect induced by this electrolyte. Photocurrent has been generated by either a CdS/TiO₂ or a CdSe/CdS/TiO₂ combination, both functioning in the presence of sacrificial agents. Thus, in the first case ethanol was used as fuel, while in the second case a mixture of Na₂S with Na₂SO₃ has been employed.

Resilient Pathways to Atomic Attachment of Quantum Dot Dimers and Artificial Solids from Faceted CdSe Quantum Dot Building Blocks

The goal of this work is to identify favored pathways for preparation of defect-resilient attached wurtzite CdX (X = S, Se, Te) nanocrystals. We seek guidelines for oriented attachment of faceted nanocrystals that are most likely to yield pairs of nanocrystals with either few or no electronic defects or electronic defects that are in and of themselves desirable and stable. Using a combination of in situ high-resolution transmission electron microscopy (HRTEM) and electronic structure calculations, we evaluate the relative merits of atomic attachment of wurtzite CdSe nanocrystals on the {11̅00} or {112̅0} family of facets. Pairwise attachment on either facet can lead to perfect interfaces, provided the nanocrystal facets are perfectly flat and the angles between the nanocrystals can adjust during the assembly. Considering defective attachment, we observe for {11̅00} facet attachment that only one type of edge dislocation forms, creating deep hole traps. For {112̅0} facet attachment, we observe that four distinct types of extended defects form, some of which lead to deep hole traps whereas others only to shallow hole traps. HRTEM movies of the dislocation dynamics show that dislocations at {11̅00} interfaces can be removed, albeit slowly. Whereas only some extended defects at {112̅0} interfaces could be removed, others were trapped at the interface. Based on these insights, we identify the most resilient pathways to atomic attachment of pairs of wurtzite CdX nanocrystals and consider how these insights can translate to the creation of electronically useful materials from quantum dots with other crystal structures.

Electrodeposition of Nanoparticles and Continuous Film of CdSe on n-Si (100)

CdSe electrodeposition on n-Si (100) substrate was investigated in sulfuric acid solution. The behaviour and the deposition of the precursors (Cd and Se) were studied separately at first. Then, we explored both the alternated deposition, one layer by one, as well as the simultaneous co-deposition of the two elements to form the CdSe semiconductor. Varying the deposition conditions, we were able to obtain nanoparticles, or a thin film, on the surface of the electrode. The samples were then characterised microscopically and spectroscopically with SEM, XRD and XPS. Finally, we evaluated the induced photoemission of the deposit for the application in optoelectronics.

Review on Quasi One-Dimensional CdSe Nanomaterials: Synthesis and Application in Photodetectors

During the past 15 years, quasi one-dimensional (1D) Cadmium Selenide (CdSe) nanomaterials have been widely investigated for high-performance electronic and optoelectronic devices, due to the unique geometrical and physical properties. In this review, recent advancements on diverse synthesis methods of 1D CdSe nanomaterials and the application in photodetectors have been illustrated in detail. First, several bottom-up synthesis methods of 1D CdSe nanomaterials have been introduced, including the vapor-liquid-solid method, the solution-liquid-solid method, and electrochemical deposition, etc. Second, the discussion on photodetectors based on 1D CdSe nanomaterials has been divided into three parts, including photodiodes, photoconductors, and phototransistors. Besides, some new mechanisms (such as enhancement effect of localized surface plasmon, optical quenching effect of photoconductivity, and piezo-phototronic effect), which can be utilized to enhance the performance of photodetectors, have also been elaborated. Finally, some major challenges and opportunities towards the practical integration and application of 1D CdSe nanomaterials in photodetectors have been discussed, which need to be further investigated in the future.

Insights into the Formation Mechanism of CdSe Nanoplatelets Using in Situ X-ray Scattering

Two-dimensional ultrathin CdSe nanoplatelets have attracted a large interest due to their optical properties but their formation mechanism is not well understood. Several different mechanisms have been proposed: confined growth in a surfactant mesophase acting as a template, anisotropic ripening of small seeds into 2D nanoplatelets, or continuous anisotropic growth of a limited number of nuclei. However, quantitative in situ data that could validate or disprove these formation scenarios are lacking. We use synchrotron-based small-angle and wide-angle X-ray scattering to probe the formation mechanism of CdSe nanoplatelets synthesized using a heating-up method. We prove the absence of a molecular mesophase in the reactive medium at the onset of nanoplatelet formation ruling out a templating effect. We also show that our data are inconsistent with the anisotropic ripening of small seeds whereas the evolution of the SAXS patterns during the reaction is consistent with the continuous lateral growth of nanoplatelets fed by reactive monomers. Finally, we show that when the final temperature of the synthesis is lowered, nanoplatelets with larger lateral dimensions form. We reveal that they bend in solution during their growth to yield nanoscrolls.

Temperature-Induced Self-Compensating Defect Traps and Gain Thresholds in Colloidal Quantum Dots

Continuous-wave (CW) lasing was recently achieved in colloidal quantum dots (CQDs) by lowering the threshold through the introduction of biaxial strain. However, the CW laser threshold is still much higher than the femtosecond threshold. This must be addressed before electrically injected lasing can be realized. Here we investigate the relationship between threshold and temperature and find a subpicosecond recombination process that proceeds very efficiently at temperatures reached during CW excitation. We combine density functional theory and molecular dynamics simulations to explore potential candidates for such a process, and find that crystal defects having thermally vibrating energy levels can become electronic traps-i.e., they can protrude into the bandgap-when they are sufficiently distorted at higher temperatures. We find that biaxially strained CQDs, which have a lower femtosecond laser threshold than traditional CQDs, result in less heat for a given transparency/gain level and thus undergo this trapping to a lower extent. We also propose methods to tailor CQDs to avoid self-compensating defect traps.

One-Dimensional Cuprous Selenide Nanostructures with Switchable Plasmonic and Super-ionic Phase Attributes

Cuprous selenide nanocrystals have hallmark attributes, especially tunable localized surface plasmon resonances (LSPRs) and super-ionic behavior. These attributes of cuprous selenide are now integrated with a one-dimensional morphology. Essentially, Cu₂ Se nanowires (NWs) of micrometer-scale lengths and about 10 nm diameter are prepared. The NWs exhibit a super-ionic phase that is stable at temperatures lower than in the bulk, owing to compressive lattice strain along the radial dimension of the NWs. The NWs can be switched between oxidized and reduced forms, which have contrasting phase transition and LSPR characteristics. This work thus makes available switchable, one-dimensional waveguides and ion-conducting channels.

Synthesis of Inorganic-Organic 2D CdSe Slab-Diamine Quantum Nets

Porous semiconductors attract great interest due to their unique structural characteristics of high surface area as well as their intrinsic optical and electronic properties. In this study, synthesis of inorganic-organic 2D CdSe slabs-diaminooctane (DAO) porous quantum net structures is demonstrated. It is found that the hybrid 2D CdSe-DAO lamellar structures are disintegrated into porous net structures, maintaining an ultrathin thickness of ≈1 nm in CdSe slabs. Furthermore, the CdSe slabs in quantum nets show the highly shifted excitonic transition in the absorption spectrum, demonstrating their strongly confined electronic structures. The possible formation mechanism of this porous structure is investigated with the control experiments of the synthesis using n-alkyldiamines with various hydrocarbon chain lengths and ligand exchange of DAO with oleylamine. It is suggested that a strong van der Waals interaction among long chain DAO may exert strong tensile stress on the CdSe slabs, eventually disintegrating slabs. The thermal decomposition of CdSe-DAO quantum nets is further studied to form well-defined CdSe nanorods. It is believed that the current CdSe-DAO quantum nets will offer a new type of porous semiconductors nanostructures under a strong quantum-confinement regime, which can be applied to various technological areas of catalysts, electronics, and optoelectronics.

Giant Modal Gain Coefficients in Colloidal II-VI Nanoplatelets

Modal gain coefficient is a key figure of merit for a laser material. Previously, net modal gain coefficients larger than a few thousand cm^-1 were achieved in II-VI and III-V semiconductor gain media, but this required operation at cryogenic temperatures. In this work, using pump-fluence-dependent variable-stripe-length measurements, we show that colloidal CdSe nanoplatelets enable giant modal gain coefficients at room temperature up to 6600 cm^-1 under pulsed optical excitation. Furthermore, we show that exceptional gain performance is common to the family of CdSe nanoplatelets, as shown by examining samples having different vertical thicknesses and lateral areas. Overall, colloidal II-VI nanoplatelets with superior optical gain properties are promising for a broad range of applications, including high-speed light amplification and loss compensation in plasmonic photonic circuits.

Improving the Photoresponse Properties of CdSe Quantum Wires by Alignment and Ligand Exchange

Semiconductor nanowires are the ideal building blocks to construct various thin-film electronic and optoelectronic devices, the performance of which is largely determined by their ensemble geometry and surface chemistry in addition to the chemical composition. Here, we report the large-scale and oriented assembly of CdSe nanowires on the basis of a light-induced assembly approach under an external electric field. To further increase the electrical conductivity of nanowire films, the original surface-capping organic ligands are exchanged with small ionic species through a solid-state ligand-exchange process. The resulting surface-modified CdSe nanowire films exhibit markedly enhanced photoresponse properties including high on/off ratios and fast response. This work establishes a simple yet scalable method to fabricate aligned nanowire films with a desired surface chemistry, which can be broadly used in various electronic and optoelectronic devices.

Tungsten Trioxide Doped with CdSe Quantum Dots for Smart Windows

Nanocrystal quantum dots (QDs) provide tunable optoelectronic properties on the basis of their dimension. CdSe QDs, which are size-dependent colloidal nanocrystals, are used for efficient electrochromic devices owing to their unique properties in modulating quantum confinement, resulting in enhanced electron insertion during the electrochromic process. Incorporating a well-known metal oxide electrochromic material such as WO₃ into CdSe QDs enhances the redox process. Herein, we propose a facile method for producing and optimizing CdSe QDs doped in WO₃. The fabrication of the electrochromic film involves a solution and annealing process. Moreover, the effect of the QD size to optimize the electrochromic layer is studied. As a result, the coloration efficiency of WO₃ and optimized CdSe QD-WO₃ are obtained as 68.6 and 112.3 cm²/C, respectively. Thus, size-tunable nanocrystal QDs combined with a metal oxide yield high-performance electrochromic devices and are promising candidates for producing smart windows.

Impact of Shell Growth on Recombination Dynamics and Exciton-Phonon Interaction in CdSe-CdS Core-Shell Nanoplatelets

We investigate the impact of shell growth on the carrier dynamics and exciton-phonon coupling in CdSe-CdS core-shell nanoplatelets with varying shell thickness. We observe that the recombination dynamics can be prolonged by more than one order of magnitude, and analyze the results in a global rate model as well as with simulations including strain and excitonic effects. We reveal that type I band alignment in the hetero platelets is maintained at least up to three monolayers of CdS, resulting in approximately constant radiative rates. Hence, observed changes of decay dynamics are not the result of an increasingly different electron and hole exciton wave function delocalization as often assumed, but an increasingly better passivation of nonradiative surface defects by the shell. Based on a global analysis of time-resolved and time-integrated data, we recover and model the temperature dependent quantum yield of these nanostructures and show that CdS shell growth leads to a strong enhancement of the photoluminescence quantum yield. Our results explain, for example, the very high lasing gain observed in CdSe-CdS nanoplatelets due to the type I band alignment that also makes them interesting as solar energy concentrators. Further, we reveal that the exciton-LO-phonon coupling is strongly tunable by the CdS shell thickness, enabling emission line width and coherence length control.

SILAR controlled CdSe nanoparticles sensitized ZnO nanorods photoanode for solar cell application: Electrolyte effect

Controlled growth of different sizes of cadmium selenide (CdSe) nanoparticles over well aligned ZnO nanorods have been performed using successive ionic layer adsorption and reaction (SILAR) technique at room temperature (27 °C) in order to form nano heterostructure solar cells. Deposition of compact layer of zinc oxide (ZnO) by SILAR technique on fluorine doped tin oxide (FTO) coated glass substrate followed by growth of vertically aligned ZnO nanorods array using chemical bath deposition (CBD) at low temperature (<100 °C). Different characterization techniques viz. X-ray diffractometer, UV-Vis spectrophotometer, field emission scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy have been used to know the structural, optical, morphological and compositional properties of synthesized nano heterostructure. The photovoltaic performance of the cells with variation in SILAR cycles for CdSe and with use of different electrolytes have been recorded as J-V characteristics and the maximum conversion efficiency of 0.63% have been attained with ferro/ferri cyanide electrolyte for 12 cycles CdSe coating over 1-D ZnO nanorods.

Fluorescence alteration of MPA capped CdSe quantum dots by spontaneous biomarker protein adsorption

Quantum dots (QDs) have significant potentials in biomedical applications of bioimaging and biosensing. Spontaneous adsorption of proteins on QDs surface is a common phenomenon, which occurred to serum proteins in biological samples, and has been observed to enhance QDs fluorescence. In this study, fluorescence alteration of 3-mercaptopropionic acid (MPA) capped CdSe quantum dots by four individual biomarker proteins was investigated. By monitoring the fluorescence emission of QDs, the biomarker protein adsorbed spontaneously on QDs surface was recognized and quantified. When alpha fetoprotein (AFP) or heat shock protein 90 alpha (HSP90α) were present, the QDs became brighter. The presence of cytochrome C (CytoC) or lysozyme (Lyz) made the QDs dimmer first, and then brighter. Within five minutes response time all four biomarker proteins were detected individually with the estimated detection limit in the range of 1-10 ng/mL and good linear dynamic ranges. The results suggested that the fluorescence of QDs was responsive to not only serum proteins but also biomarker proteins. The fluorescence response was able to correlate quantitatively with the amount of biomarker proteins in relatively low concentrations. These results provide more information to understand QDs and support their applications in biomedical fields.

Emergence of Nanoplatelet Light-Emitting Diodes

Since 2014, nanoplatelet light-emitting diodes (NPL-LEDs) have been emerged as a new kind of LEDs. At first, NPL-LEDs are mainly realized by CdSe based NPLs. Since 2016, hybrid organic-inorganic perovskite NPLs are found to be effective to develop NPL-LEDs. In 2017, all-inorganic perovskite NPLs are also demonstrated for NPL-LEDs. Therefore, the development of NPL-LEDs is flourishing. In this review, the fundamental concepts of NPL-LEDs are first introduced, then the main approaches to realize NPL-LEDs are summarized and the recent progress of representative NPL-LEDs is highlighted, finally the challenges and opportunities for NPL-LEDs are presented.

Efficient Solution-Processed Nanoplatelet-Based Light-Emitting Diodes with High Operational Stability in Air

Colloidal nanoplatelets (NPLs), owing to their efficient and narrow-band luminescence, are considered as promising candidates for solution-processable light-emitting diodes (LEDs) with ultrahigh color purity. To date, however, the record efficiencies of NPL-LEDs are significantly lower than those of more-investigated devices based on spherical nanocrystals. This is particularly true for red-emitting NPL-LEDs, the best-reported external quantum efficiency (EQE) of which is limited to 0.63% (EQE = 5% for green NPL-LEDs). Here, we address this issue by introducing a charge-regulating layer of a polar and polyelectrolytic polymer specifically engineered with complementary trimethylammonium and phosphonate functionalities that provide high solubility in orthogonal polar media with respect to the NPL active layer, compatibility with the metal cathode, and the ability to control electron injection through the formation of a polarized interface under bias. Through this synergic approach, we achieve EQE = 5.73% at 658 nm (color saturation 98%) in completely solution processed LEDs. Remarkably, exposure to air increases the EQE to 8.39%, exceeding the best reports of red NPL-LEDs by over 1 order of magnitude and setting a new global record for quantum-dot LEDs of any color embedding solution-deposited organic interlayers. Considering the emission quantum yield of the NPLs (40 ± 5%), this value corresponds to a near-unity internal quantum efficiency. Notably, our devices show exceptional operational stability for over 5 h of continuous drive in air with no encapsulation, thus confirming the potential of NPLs for efficient, high-stability, saturated LEDs.

Seeing Multiexcitons through Sample Inhomogeneity: Band-Edge Biexciton Structure in CdSe Nanocrystals Revealed by Two-Dimensional Electronic Spectroscopy

The electronic structure of multiexcitons significantly impacts the performance of nanostructures in lasing and light-emitting applications. However, these multiexcitons remain poorly understood due to their complexity arising from many-body physics. Standard transient-absorption and photoluminescence spectroscopies are unable to unambiguously distinguish effects of sample inhomogeneity from exciton-biexciton interactions. Here, we exploit the energy and time resolution of two-dimensional electronic spectroscopy to access the electronic structure of the band-edge biexciton in colloidal CdSe quantum dots. By removing effects of inhomogeneities, we show that the band-edge biexciton structure must consist of a discrete manifold of electronic states. Furthermore, the biexciton states within the manifold feature distinctive binding energies. Our findings have direct implications for optical gain thresholds and efficiency droop in light-emitting devices and provide experimental measures of many-body physics in nanostructures.

High-Gain 200 ns Photodetectors from Self-Aligned CdS-CdSe Core-Shell Nanowalls

1D core-shell heterojunction nanostructures have great potential for high-performance, compact optoelectronic devices owing to their high interface area to volume ratio, yet their bottom-up assembly toward scalable fabrication remains a challenge. Here the site-controlled growth of aligned CdS-CdSe core-shell nanowalls is reported by a combination of surface-guided vapor-liquid-solid horizontal growth and selective-area vapor-solid epitaxial growth, and their integration into photodetectors at wafer-scale without postgrowth transfer, alignment, or selective shell-etching steps. The photocurrent response of these nanowalls is reduced to 200 ns with a gain of up to 3.8 × 10³ and a photoresponsivity of 1.2 × 10³ A W^-1 , the fastest response at such a high gain ever reported for photodetectors based on compound semiconductor nanostructures. The simultaneous achievement of sub-microsecond response and high-gain photocurrent is attributed to the virtues of both the epitaxial CdS-CdSe heterojunction and the enhanced charge-separation efficiency of the core-shell nanowall geometry. Surface-guided nanostructures are promising templates for wafer-scale fabrication of self-aligned core-shell nanostructures toward scalable fabrication of high-performance compact photodetectors from the bottom-up.

Influences of CdSe NCs on the photovoltaic parameters of BHJ organic solar cells

In this study, the high quality CdSe nanocrystals (NCs) capped with stearic acid were synthesized in a solvent and then purified four times by using the precipitation and redissolution process. The average size of the synthesized CdSe NCs was determined ~3.0nm via transmission electron microscopy (TEM) measurement and their corresponding optical band edge energy was also calculated as ~2.1eV using ultraviolet-visible (UV-Vis) absorption spectroscopy. The bulk heterojunction (BHJ) hybrid solar cells based on a ternary system including P3HT, PCBM and CdSe NCs at different weight concentrations (0wt%, 0.1wt%, 0.5wt%, 1wt% and 2wt%) were fabricated by spin-casting process. The effect of the concentration of CdSe NCs on the photovoltaic parameters of these BHJ organic solar cells was investigated. The surface morphology of the photoactive layer modified by the incorporation of CdSe NCs into P3HT:PCBM matrix was observed with scanning electron microscopy (SEM). It was shown that when the concentration of CdSe NCs increases above 0.1wt% in this ternary system, the photovoltaic performance of the devices significantly decreases. The power conversion efficiency of the organic photovoltaic (OPV) device was enhanced ~20% by incorporating CdSe NCs with 0.1wt% with respect to those without CdSe NCs.

Tuning Single Quantum Dot Emission with a Micromirror

The photoluminescence of single quantum dots fluctuates between bright (on) and dark (off) states, also termed fluorescence intermittency or blinking. This blinking limits the performance of quantum dot-based devices such as light-emitting diodes and solar cells. However, the origins of the blinking remain unresolved. Here, we use a movable gold micromirror to determine both the quantum yield of the bright state and the orientation of the excited state dipole of single quantum dots. We observe that the quantum yield of the bright state is close to unity for these single QDs. Furthermore, we also study the effect of a micromirror on blinking, and then evaluate excitation efficiency, biexciton quantum yield, and detection efficiency. The mirror does not modify the off-time statistics, but it does change the density of optical states available to the quantum dot and hence the on times. The duration of the on times can be lengthened due to an increase in the radiative recombination rate.

Electron and Hole g-Factors and Spin Dynamics of Negatively Charged Excitons in CdSe/CdS Colloidal Nanoplatelets with Thick Shells

We address spin properties and spin dynamics of carriers and charged excitons in CdSe/CdS colloidal nanoplatelets with thick shells. Magneto-optical studies are performed by time-resolved and polarization-resolved photoluminescence, spin-flip Raman scattering and picosecond pump-probe Faraday rotation in magnetic fields up to 30 T. We show that at low temperatures the nanoplatelets are negatively charged so that their photoluminescence is dominated by radiative recombination of negatively charged excitons (trions). Electron g-factor of 1.68 is measured, and heavy-hole g-factor varying with increasing magnetic field from -0.4 to -0.7 is evaluated. Hole g-factors for two-dimensional structures are calculated for various hole confining potentials for cubic- and wurtzite lattice in CdSe core. These calculations are extended for various quantum dots and nanoplatelets based on II-VI semiconductors. We developed a magneto-optical technique for the quantitative evaluation of the nanoplatelets orientation in ensemble.