Dual-wavelength light radiation for synergistic water disinfection

Development of the narrow-band mercury-free light sources, such as light emitting diodes (LEDs) and excilamps, has stimulated research on inactivation of pathogenic microorganisms by dual-wavelength light radiation. To date, dual-wavelength light radiation has emerged as an advanced tool for enhancing microbial inactivation in water in view of potential synergistic effect. This is the first review that aims at elucidating its mechanisms under dual-wavelength light exposure and surveying a body of related literature in terms of yes-or-no synergy. We have proposed three key inactivation mechanisms, which function in the estimated spectrum ranges I (190-254 nm), II (250-320 nm) and III (300-405 nm) and provide a synergistic effect when combined. These mechanisms involve proteins damage and DNA repair suppression (I), direct and indirect DNA damage (II) and generation of reactive oxygen species (ROS) by endogenous photosensitizers (III), such as porphyrins and flavins. A synergy under dual-wavelength light irradiation simultaneously or sequentially occurs if coupling two wavelengths of different ranges (I + II, I + III, II + III) in order to trigger different inactivation mechanisms. Recent advances of dual-wavelength light strategy in photodynamic therapy could be applied for water disinfection. They bring opportunities for applying the sources of near-UV and visible radiation and making the disinfection processes more energy- and cost-effective. From this standpoint, the synergistically efficient dual-wavelength combinations II + III and the combinations within the extended to 700 nm range III (near-UV + VIS) appear to be promising for developing novel advanced oxidation processes for disinfection of real turbid waters.

Physically-crosslinked hydroxyethyl cellulose-g-poly (acrylic acid-co-acrylamide)-Fe3+/silver nanoparticles for water disinfection and enhanced adsorption of basic methylene blue dye

In this study, we report the development of physically cross-linked hydroxyethyl cellulose grafted polyacrylic acid-co-polyacrylamide/silver nanocomposite [Ag@HEC-g-P(AA-co-AM)-Fe³⁺] possesses excellent antimicrobial and enhanced MB adsorption. A green in-situ reduction process was used to prepare silver nanoparticles. UV-Vis spectroscopy, TEM, ATR-IR, XRD, SEM-EDS were used to analyze the green produced silver nanoparticles and Ag@HEC-g-P(AA-co-AM)-Fe³⁺. The swelling ratio of Ag@HEC-g-P(AA-co-AM)-Fe³⁺ is dependent on AgNPs content and pH. The swelling kinetics fitted with Pseudo-second order. The cumulative release#% of AgNPs was 29.63 ± 1.7%, respectively up to 10 h and its kinetics obey Korsmeyer-Peppas model. The grafting to HEC and incorporation of AgNPs into HEC-g-P(AA-co-AM)-Fe³⁺ enhances the thermal stabilities and increases total activation energies from 19,122.2 to 66,287.1 KJ mol. Ag@HEC-g-P(AA-co-AM)-Fe³⁺ has powerful antimicrobial activity against Escherichia coli, Pseudomonas aeruginosa, Bacillus subtilis, Micrococcus leutus, Staphyllococus aureus. The maximum adsorption capacity of MB was 133.38 ± 1.25 mg/g at nanocomposite concentration (300 mg/L), pH (9.0), and MB concentration (5 mg/L). To anticipate the adsorption mechanism, Pseudo-first and second-order models, as well as three isotherm models (Langmuir, Freundlich, and Temkin) were used to model adsorption kinetics. The nonlinear Langmuir models and second-order kinetics were the most appropriate.

A model to predict the kinetics of direct (endogenous) virus inactivation by sunlight at different latitudes and seasons, based on the equivalent monochromatic wavelength approach

Sunlight plays an important role in the inactivation of pathogenic microorganisms such as bacteria and viruses in water. Here we present a model that is able to predict the kinetics of direct virus inactivation (i.e. inactivation triggered by sunlight absorption by the virion, without the role played by photochemically produced reactive intermediates generated by water-dissolved photosensitizers) on a global scale (from 60 °S to 60 °N latitude) and for the different months of the year. The model is based on the equivalent monochromatic wavelength (EMW) approach that was introduced recently, and which largely simplifies complex polychromatic calculations by approximating them with a monochromatic equation at the proper wavelength, the EMW. The EMW equation was initially established for mid-July conditions at a mid-latitude, and was then extended to different seasons and to the latitude belt where the day-night cycle is always observed throughout the year. By so doing, the first-order rate constant of direct virus photoinactivation can be predicted on a global scale, with the use of a relatively simple equation plus tables of pre-calculated input data, as a function of latitude, month, and key water parameters. The model was here applied to the virus organism phiX174, a somatic phage that is often used as proxy for pathogenic viruses undergoing fast direct inactivation, and for which a wide array of published inactivation data is available. Model predictions are validated by comparison with field data of inactivation of somatic phages by sunlight.

Innovative green/non-toxic Bi2S3@g-C3N4 nanosheets for dark antimicrobial activity and photocatalytic depollution: Turnover assessment

Herein, green and non-toxic bismuth sulphide@graphitic carbon nitride (Bi₂S₃@g-C₃N₄) nanosheets (NCs) were firstly synthesized by ultrasonicated-assisted method and characterized with different tool. Bi₂S₃@g-C₃N₄ NCs antimicrobial activity tested against three types of microbes. As well the heterostructured Bi₂S₃@g-C₃N₄ NCs was investigated for removing dye and hexavalent chromium under visible light and showed high efficiency of photocatalytic oxidation/reduction higher than g-C₃N₄ alone, attributing to lower recombination photogenerated electron-hole pairs. Bi₂S₃@g-C₃N₄ NCs showed high antimicrobial efficiencies against Staphylococcus aureus (S. aureus) as a Gram positive bacterium, Escherichia coli (E. Coli)as a Gram negative bacterium and Candida albicans (C. albicans) and that the disinfection rates are 99.97%, 99.98% and 99.92%, respectively. The core mechanism is that the bacterial membrane could be destroyed by reactive oxygen species. The Bi₂S₃@g-C₃N₄ NCs is promising for environmental disinfection including water and public facilities disinfection and solar photocatalytic depollution. Turnover number (TON) and Turnover frequency (TOF) are used as concise assessment indicator for photocatalytic efficiency.

Copper hydroxide nanosheets-assembled nanofibrous membranes for anti-biofouling water disinfection

Copper hydroxide (Cu(OH)₂) has been elected as a newly-emerging green disinfectant to deal with membrane biofouling in the treatment of bacteria-contaminated water; however, the decoration strategy of it with the granular form on membrane substrates limits the practical application. Here a novel surface-confined methodology was proposed for preparing freestanding Cu(OH)₂ nanosheet-assembled nanofibrous membranes (CNNMs) with the anti-biofouling property via the in-suit coprecipitation and heat-induced growth method. The vertically aligned Cu(OH)₂ nanosheets were in-suit rooted on the surface of the nanofiber scaffold with high binding fastness. The acquired CNNMs possess comprehensive performances of high porosity, prominent mechanical strength, fatigue resistance, and superior bactericidal efficiency of 99.999%, which endowed the CNNMs ultrahigh filtration fluxes (24000 L m^-2 h^-1) and durability to disinfect bacteria-containing water effectively. This facile strategy may throw light on manufacturing novel inorganic nanosheet-rooted nanofibrous membranes for water disinfection and public health.

Solar processes and ozonation for fresh-cut wastewater reclamation and reuse: Assessment of chemical, microbiological and chlorosis risks of raw-eaten crops

In this study, a full cycle of agricultural reuse of agro-food wastewater (synthetic fresh-cut wastewater, SFCWW) at pilot plant scale has been investigated. Treated SFCWW by ozonation and two solar processes (H2O2/solar, Fe3+-EDDHA/H2O2/solar) was used to irrigate two raw-eaten crops (lettuce and radish) grown in peat. Two foodborne pathogens (E. coli O157:H7 and Salmonella enteritidis) and five organic microcontaminants (OMCs: atrazine, azoxystrobin, buprofezin, procymidone and terbutryn) were monitored along the whole process. The three studied processes showed a high treatment capability (reaching microbial loads < 7 CFU/100 mL and 21-90 % of OMC reduction), robustness (based on 7 or 10 analysed batches for each treatment process) and high suitability for subsequent treated SFCWW safe reuse: non-phytotoxic towards Lactuca sativa and no bacterial regrowth during its storage for a week. The analysis of the harvested crop samples irrigated with treated SFCWW in all the studied processes showed an absence of microbial contamination (< limit of detection, LOD; i.e., < 1 CFU/99 g of lettuce and < 1 CFU/8 g of radish), a significant reduction of OMC uptake (in the range 40-60 % and > 90 % for solar treated and ozonated SFCWW, respectively) and bioaccumulation in both crops in comparison with the results obtained with untreated SFCWW. Moreover, the chlorophyll content in the harvested lettuces irrigated with SFCWW treated by Fe3+-EDDHA/H2O2/solar was twice than that irrigated with SFCWW treated by H2O2/solar and ozone, indicating the additional advantage of using Fe3+-EDDHA as an iron source to reduce the risk of iron chlorosis in crops. Finally, the chemical (dietary risk assessment for the combined exposure of the 5 OMCs) and quantitative microbiological risk assessment (QMRA) of the harvested crops showed the capability of the studied processes to reduce the risk associated with untreated SFCWW reuse by more than 50 % and more than 4 orders of magnitude, respectively.

Inactivation of Aspergillus species in real water matrices using medium pressure mercury lamps

The aim of this work is to understand the inactivation efficiency of medium pressure mercury lamps, measured in terms of growth inhibition as well as cell death, damage and response, using three strains from three different Aspergillus species (A. fumigatus, A. niger and, A. terreus) spiked in filtered surface water. A complete characterization of the effect of the treatment on each strain of the fungal species was assessed considering spores' morphology, cell wall integrity and enzymatic activity, the formation of pyrimidine dimers in the DNA and proteome analysis. Results showed that, when subjected to medium pressure mercury lamps, A. niger is the most resistant to inactivation, that both A. fumigatus and A. niger suffer more morphological changes and present a higher number of damaged spores and A. terreus presented more dead spores. DNA damages detected in A. niger were able to be repaired to some extent, under both light and dark conditions. Finally, proteome analysis showed that the UV radiation treatment triggered different types of stress response, including cell wall reorganization and DNA repair in A. fumigatus and A. terreus, and oxidative stress responses like the increase in production of citric acid and itaconic acid in A. niger and A. terreus, respectively.

Recent development in antimicrobial activity of biopolymer-inorganic nanoparticle composites with water disinfection potential: a comprehensive review

Nowadays, water-borne diseases including hepatitis remain the critical health challenge due to the inadequate supply of potable and safe water for human activities. The major cause is that the pathogenic microorganisms causing diseases have developed resistance against common techniques used by sewage water treatment plants for water disinfection. Therefore, there is a need to improve these conventional water treatment techniques by taking into consideration the application of nanotechnology for wastewater purification. The main aim of this paper is to provide a review on the synthesis of biopolymer-inorganic nanoparticle composites (BINCs), their used as antimicrobial compounds for water disinfection, as well as to elaborate on their antimicrobial mechanism of action. The microbial properties affecting the activity of antimicrobial compounds are also evaluated.

Disinfection characteristics of an advanced rotational hydrodynamic cavitation reactor in pilot scale

Hydrodynamic cavitation is a promising technique for water disinfection. In the present paper, the disinfection characteristics of an advanced hydrodynamic cavitation reactor (ARHCR) in pilot scale were studied. The effects of various flow rates (1.4-2.6 m³/h) and rotational speeds (2600-4200 rpm) on the removal of Escherichia coli (E. coli) were revealed and analyzed. The variation regularities of the log reduction and reaction rate constant at various cavitation numbers were established. A disinfection rate of 100% was achieved in only 4 min for 15 L of simulated effluent under 4200 rpm and 1.4 m³/h, with energy efficiency at 0.0499 kWh/L. A comprehensive comparison with previously introduced HCRs demonstrates the superior performance of the presented ARHCR system. The morphological changes in E. coli were studied by scanning electron microscopy. The results indicate that the ARHCR can lead to serious cleavage and surface damages to E. coli, which cannot be obtained by conventional HCRs. Finally, a possible damage mechanism of the ARHCR, including both the hydrodynamical and sonochemical effects, was proposed. The findings of the present study can provide strong support to the fundamental understanding and applications of ARHCRs for water disinfection.

Mussel-inspired surface functionalization of polyamide microfiltration membrane with zwitterionic silver nanoparticles for efficient anti-biofouling water disinfection

Mature microfiltration (MF) membrane is a low-cost, effective, and promising technology to provide affordable purified water for people living in developing countries. However, the lack of disinfection ability and inherent membrane fouling problems have seriously restricted the large-scale application of conventional MF treatment system in producing safe drinking water. In this work, zwitterionic silver nanoparticles (AgNPs) with surface modification of poly(carboxybetaine acrylate-co-dopamine methacryamide) (PCBDA) copolymers were robustly immobilized onto commercial polyamide MF membrane via mussel-inspired chemistry for water disinfection. The designed microfiltration membrane, named as PCBDA@AgNPs-MF, exhibited integrated properties of high and stable payload of AgNPs, broad-spectrum anti-adhesive and antimicrobial activities, and easy removal of inactivated microbial cells from membrane surface. Ascribing to the synergetic effect of anti-adhesive and antimicrobial features brought by zwitterionic PCBDA@AgNPs, the biofilms growth on polyamide membrane surface was significantly inhibited, which showed potential access to achieve long-term biofouling resistance and maintain water flux for conventional MF membrane. As water disinfection device, these attributes enabled PCBDA@AgNPs-MF to effectively disinfect the model and natural bacteria-contaminated water.

Cotton decorated with Cu2O-Ag and Cu2O-Ag-AgBr NPs via an in-situ sacrificial template approach and their antibacterial efficiency

Cotton fabrics decorated with Cu₂O-Ag and Cu₂O-Ag-AgBr NPs have been prepared using chemically immobilized Cu₂O NPs as sacrificial templates. The objective is to prepare Cu₂O-Ag heterostructures with Ag being intimately in contact with Cu₂O NPs by galvanic replacement reactions without addition of any external reducing agent. Field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) analysis were used to study the morphology and the chemical composition of the nanocomposites formed on the fabrics. The morphology of the ensuing nanostructures was shown to be dependent on the Ag precursor, AgNO₃, concentration. The antimicrobial activity of the treated fabrics was evaluated against Staphylococcus aureus and Escherichia coli as model strains of gram-negative and gram-positive, respectively. The results showed that the fabrics loaded with Cu₂O-Ag and Cu₂O-Ag-AgBr nanocomposites exhibited enhanced sterilization activity compared to the Cu₂O treated fabric.

Mechanism and efficacy of virus inactivation by a microplasma UV lamp generating monochromatic UV irradiation at 222 nm

This study evaluated the potential of a microplasma UV lamp as an alternative UV source to the current mercury-based (Hg-based) UV lamp for water disinfection. We developed a set of PCR-based molecular assays (long-range qPCR, DNase, and binding assay) to quantify the adenovirus genome, capsid, and fiber damage with a wide detection range (10^0.5-10^6.5 PFU/mL). We used these molecular assays to characterize adenovirus (AdV) inactivation kinetics by microplasma UV that produced monochromatic UV at 222 nm. We found that the inactivation rate constant (0.142 cm²/mJ) due to microplasma UV was 4.4 times higher than that of low-pressure Hg UV (0.032 cm²/mJ). This high efficacy was attributed to monochromatic UV wavelength at 222 nm damaging the AdV capsid protein. The results of these molecular assays also proved that microplasma UV and medium-pressure Hg UV with a bandpass filter at 223 nm (MPUV_223nm) have a similar influence on AdV (p>0.05). We then estimated the relative energy efficiency of MPUV and microplasma UV to LPUV for 4 log reduction of the viruses. We found that the microplasma UV resulted in higher inactivation rate constants for viruses than the current Hg-based UV. Consequently, microplasma UV could be more energy efficient than low-pressure Hg UV for water disinfection if the wall-plug efficiency of the microplasma UV lamp improved to 8.4% (currently 1.5%). Therefore, the microplasma UV lamp is a promising option for water disinfection.

A review on hydrodynamic cavitation disinfection: The current state of knowledge

Disinfection, which aims to eliminate pathogenic microorganisms, is an essential step of water treatment. Hydrodynamic cavitation (HC) has emerged as a promising technology for large-scale disinfection without introducing new chemicals. HC, which can effectively induce sonochemistry by mechanical means, creates extraordinary conditions of pressures of ~1000 bar, local hotspots with ~5000 K, and high oxidation (hydroxyl radicals) in room environment. These conditions can produce highly destructive effects on microorganisms in water. In addition, the enhancements of chemical reactions and mass transfers by HC produce the synergism between HC and disinfectants or other physical treatment methods. HC is generated by hydrodynamic cavitation reactors (HCRs), therefore, their performance basically determines the effectiveness, economical efficiency, and applicability of HC disinfection. Therefore, developing high-performance HCRs and revealing the corresponding disinfection mechanisms are the most crucial issues today. In this review, we summarize the fundamental principles of HC and HCRs and recent development in HC disinfection. The energy release from cavitation phenomenon and corresponding mechanisms are elaborated. The performance (effectiveness, treatment ratio, and cost) of various HCRs, effects of treatment conditions on performance, and applicability of HC disinfection are evaluated and discussed. Finally, recommendations are provided for the future progress based on the analysis of previous studies.

Coronavirus in water environments: Occurrence, persistence and concentration methods - A scoping review

Coronaviruses (CoV) are a large family of viruses causing a spectrum of disease ranging from the common cold to more severe diseases as Middle East Respiratory Syndrome (MERS-CoV) and Severe Acute Respiratory Syndrome (SARS-CoV). The recent outbreak of coronavirus disease 2019 (COVID-19) has become a public health emergency worldwide. SARS-CoV-2, the virus responsible for COVID-19, is spread by human-to-human transmission via droplets or direct contact. However, since SARS-CoV-2 (as well as other coronaviruses) has been found in the fecal samples and anal swabs of some patients, the possibility of fecal-oral (including waterborne) transmission need to be investigated and clarified. This scoping review was conducted to summarize research data on CoV in water environments. A literature survey was conducted using the electronic databases PubMed, EMBASE, and Web Science Core Collection. This comprehensive research yielded more than 3000 records, but only 12 met the criteria and were included and discussed in this review. In detail, the review captured relevant studies investigating three main areas: 1) CoV persistence/survival in waters; 2) CoV occurrence in water environments; 3) methods for recovery of CoV from waters. The data available suggest that: i) CoV seems to have a low stability in the environment and is very sensitive to oxidants, like chlorine; ii) CoV appears to be inactivated significantly faster in water than non-enveloped human enteric viruses with known waterborne transmission; iii) temperature is an important factor influencing viral survival (the titer of infectious virus declines more rapidly at 23°C-25 °C than at 4 °C); iv) there is no current evidence that human coronaviruses are present in surface or ground waters or are transmitted through contaminated drinking-water; v) further research is needed to adapt to enveloped viruses the methods commonly used for sampling and concentration of enteric, non enveloped viruses from water environments. The evidence-based knowledge reported in this paper is useful to support risk analysis processes within the drinking and wastewater chain (i.e., water and sanitation safety planning) to protect human health from exposure to coronavirus through water.

Microbiological Reduction Strategies of Irrigation Water for Fresh Produce

ABSTRACT

Irrigation water can be a source of pathogenic contamination of fresh produce. Controlling the quality of the water used during primary production is important to ensure food safety and protect human health. Several measures to control the microbiological quality of irrigation water are available for growers, including preventative and mitigation strategies. However, clear guidance for growers on which strategies could be used to reduce microbiological contamination is needed. This study evaluates pathogenic microorganisms of concern in fresh produce and water, the microbiological criteria of water intended for agricultural purposes, and the preventative and mitigative microbial reduction strategies. This article provides suggestions for control measures that growers can take during primary production to reduce foodborne pathogenic contamination coming from irrigation water. Results show that controlling the water source, regime, and timing of irrigation may help to reduce the potential exposure of fresh produce to contamination. Moreover, mitigation strategies like electrolysis, ozone, UV, and photocatalysts hold promise either as a single treatment, with pretreatments that remove suspended material, or as combined treatments with another chemical or physical treatment(s). Based on the literature data, a decision tree was developed for growers, which describes preventative and mitigation strategies for irrigation-water disinfection based on the fecal coliform load of the irrigation water and the water turbidity. It helps guide growers when trying to evaluate possible control measures given the quality of the irrigation water available. Overall, the strategies available to control irrigation water used for fresh produce should be evaluated on a case-by-case basis because one strategy or technology does not apply to all scenarios.

HIGHLIGHTS

Application of activated persulfate for the inactivation of fecal bacterial indicators in water

Activated persulfate, as a member of the broad group of Advanced Oxidation Processes (AOPs), has emerged as a promising method for the elimination of microorganisms in aqueous matrices. This study evaluates the disinfection efficiency of this technique with respect to the inactivation of Escherichia coli and Enterococcus faecalis in water samples, as representative Gram negative and Gram positive bacterial indicators, respectively. In this perspective, various activators were employed, namely, ferric ion, heating, ultrasound application and UVA irradiation, which exhibited different bactericidal effect, depending on the operating conditions and the structural properties of each species. The highest disinfection rates were achieved with 200 mg/L of persulfate and ferric ion or heating as activators. For instance, 6 Log reductions were recorded within only 10-15 min when 30 mg/L of iron were applied, whereas the same bacterial removal was noted upon heat-activation at 50 °C, but in longer periods (i.e. 45-60 min). Nevertheless, in all cases E. faecalis was more resistant than E. coli, which was readily inactivated in shorter treatment periods. The overall process activity was deteriorated above the limit of 200 mg/L of persulfate. Ultrasound application exhibited lower performance, as even more prolonged treatment was required (120-150 min) for the same bacterial decay with the persulfate concentration not affecting substantially the process. In an attempt to improve the ultrasound activity, it was combined together with iron but with no synergistic results, as no actual enhancement of the method was observed. Finally, UVA did not seem to serve as an activator under the applied conditions, taking into account that it resulted in negligible loss of bacterial viability. Based on the current results, activated persulfate may be used successfully for disinfection purposes; however, the appropriate establishment of process variables is mostly required, considering the various resistance levels of aquatic microorganisms under stressed conditions.

Evaluation and prospects of nanomaterial-enabled innovative processes and devices for water disinfection: A state-of-the-art review

This study provided an overview of established and emerging nanomaterial (NM)-enabled processes and devices for water disinfection for both centralized and decentralized systems. In addition to a discussion of major disinfection mechanisms, data on disinfection performance (shortest contact time for complete disinfection) and energy efficiency (electrical energy per order; E_EO) were collected enabling assessments firstly for disinfection processes and then for disinfection devices. The NM-enabled electro-based disinfection process gained the highest disinfection efficiency with the lowest energy consumption compared with physical-based, peroxy-based, and photo-based disinfection processes owing to the unique disinfection mechanism and the direct mean of translating energy input to microbes. Among the established disinfection devices (e.g., the stirred, the plug-flow, and the flow-through reactor), the flow-through reactor with mesh/membrane or 3-dimensional porous electrodes showed the highest disinfection performance and energy efficiency attributed to its highest mass transfer efficiency. Additionally, we also summarized recent knowledge about current and potential NMs separation and recovery methods as well as electrode strengthening and optimization strategies. Magnetic separation and robust immobilization (anchoring and coating) are feasible strategies to prompt the practical application of NM-enabled disinfection devices. Magnetic separation effectively solved the problem for the separation of evenly distributed particle-sized NMs from microbial solution and robust immobilization increased the stability of NM-modified electrodes and prevented these electrodes from degradation by hydraulic detachment and/or electrochemical dissolution. Furthermore, the study of computational fluid dynamics (CFD) was capable of simulating NM-enabled devices, which showed great potential for system optimization and reactor expansion. In this overview, we stressed the need to concern not only the treatment performance and energy efficiency of NM-enabled disinfection processes and devices but also the overall feasibility of system construction and operation for practical application.

A systematic study of the antimicrobial mechanisms of cold atmospheric-pressure plasma for water disinfection

Waterborne diseases caused by pathogenic microorganisms pose a severe threat to human health. Cold atmospheric-pressure plasma (CAP) has recently gained much interest as a promising fast, effective, economical and eco-friendly method for water disinfection. However, the antimicrobial mechanism of CAP in aqueous environments is still not clearly understood. Herein, we investigate the role of several short-lived reactive oxygen species (ROS) and cellular responses in the CAP inactivation of yeast cells in water. The results show that singlet oxygen (¹O₂), hydroxyl radical (OH) and superoxide anion (O₂^-) are generated in this plasma-water system, and O₂^- served as the precursor of OH. The 5-min plasma treatment resulted in the effective inactivation (more than 2-log reduction) of yeast cells in water. The ROS scavengers significantly increased the survival ratio in the following order: water < D-Man (scavenging OH) < SOD (scavenging O₂^-) < L-His (scavenging ¹O₂), indicating that ¹O₂ contributes the most to the yeast inactivation. In addition, the acidic pH had a synergetic antimicrobial effect with ROS against the yeast cells. During the CAP inactivation process, yeast cells underwent apoptosis in the first 3 min due to the accumulation of intracellular ROS, mitochondrial dysfunction and intracellular acidification, later followed by necrosis under longer exposure times, attributed to the destruction of the cell membrane. Additionally, L-His could switch the cell fate from necrosis to apoptosis through mitigating plasma-induced oxidative stress, indicating that the level of oxidative stress is a critical factor for cell death fate determination. These findings provide comprehensive insights into the antimicrobial mechanism of CAP, which can promote the development of CAP as an alternative water disinfection strategy.

Water disinfection by orifice-induced hydrodynamic cavitation

Hydrodynamic Cavitation (HC) is considered as a promising water-disinfection technique. Due to the enormous complexity of the physical and chemical processes at play, research on HC reactors is usually carried out following an empirical approach. Surprisingly, past experimental studies have never been designed on dimensional-analysis principles, which makes it difficult to identify the key processes controlling the problem, isolate their effects and scale up the results from laboratory to full-scale scenarios. The present paper overcomes this issue and applies the principles of dimensional analysis to identify the major non-dimensional parameters controlling disinfection efficacy in classical HC reactors, namely orifice plates. On the basis of this analysis, it presents results from a new set of experiments, which were designed to isolate mainly the effects of the so-called cavitation number (σ_v). Experimental data confirm that the disinfection efficacy of orifice plates increases with decreasing σ_v. Finally, in order to discuss the significance of the results presented herein and frame the scope of future research, the present paper provides an overview of the drawbacks associated with dimensional analysis within the context of HC.

Review on low- and high-frequency sonolytic, sonophotolytic and sonophotochemical processes for inactivating pathogenic microorganisms in aqueous media

Ultraviolet and ultrasound-based advanced oxidation processes (AOPs) are gaining considerable research attention for water treatment and disinfection. Compared to low-frequency ultrasound (LFUS, <100 kHz), high-frequency ultrasound (HFUS, >100 kHz and MHz range) for water disinfection remains much less investigated. The present review aims at surveying and discussing literature data on microbial inactivation in non-food aqueous media using HFUS alone and with AOPs. More specifically, the review covers sonophotolytic (US/UV) processes under sequential and simultaneous modes as well as sonophotochemical processes, where both low and high frequencies were applied. Addressing a state-of-the-art biomedical research, we have attempted to provide more insight into mechanical and sonochemical mechanisms of inactivation under ultrasonic exposure. Sonoporation, intracellular generation of reactive oxygen species (ROS), energy stimulation of aquaporins to deliver ROS, and injection of extracellular ROS into sonoporated cells have all been identified as primary ways of inactivation. Application of ultrasound in the 0.2-2 MHz range and mercury-free light sources to support the Minamata Convention on Mercury is an ongoing challenge for effective elimination of microbial pathogens from water and wastewater through sonophotolytic and sonophotochemical AOPs.

Inactivation of carbapenem-resistant Klebsiella pneumoniae by photo-Fenton: Residual effect, gene evolution and modifications with citric acid and persulfate

The photo-Fenton process application to eliminate carbapenem-resistant Klebsiella pneumoniae, an antibiotic-resistant priority pathogen, was evaluated. Initially, reagents concentration effect was tested and under suitable conditions (5 mg L^-1 of Fe²⁺ and 50 mg L^-1 of H₂O₂) complete bacteria inactivation by action of hydroxyl radical and UVA plus hydrogen peroxide was achieved at 120 min. The process presented a strong residual disinfecting effect when light was turned off at only 20 min. Besides, the cultivability of treated K. pneumoniae in a selective medium containing carbapenem antibiotics was considered. bla-KPC, gene responsible for the resistance, evolution was also assessed. The bacteria response to carbapenem antibiotics was higher as the treatment time increased. In turn, bla-KPC gene remained when K. pneumoniae was completely inactivated (120 min); nevertheless, treatment times longer than 120 min diminished bla-KPC presence. Finally, the photo-Fenton process and its modifications (citric acid addition or persulfate anion instead hydrogen peroxide) were applied to a real hospital wastewater in Colombia. In such complex matrix, the conventional photo-Fenton system reached a moderate disinfection (∼3.5 log-units at 300 min). Meanwhile, in presence of citric acid total inactivation was completed at the same time. Interestingly, the H₂O₂ substitution by persulfate strongly accelerated the microorganism elimination, achieving the 6-log-units reduction after only 60 min of process action. Thus, the effective elimination of K. pneumoniae from water by the modified photo-Fenton evidenced the potential applicability of this process to limit the proliferation of antibiotic resistant bacteria.

Silica-quaternary ammonium "Fixed-Quat" nanofilm coated fiberglass mesh for water disinfection and harmful algal blooms control

Intensification of pollution loading worldwide has promoted an escalation of different types of disease-causing microorganisms, such as harmful algal blooms (HABs), instigating detrimental impacts on the quality of receiving surface waters. Formation of unwanted disinfection by-products (DBPs) resulting from conventional disinfection technologies reveals the need for the development of new sustainable alternatives. Quaternary Ammonium Compounds (QACs) are cationic surfactants widely known for their effective biocidal properties at the ppm level. In this study, a novel silica-based antimicrobial nanofilm was developed using a composite of silica-modified QAC (Fixed-Quat) and applied to a fiberglass mesh as an active surface via sol-gel technique. The synthesized Fixed-Quat nanocoating was found to be effective against E. coli with an inactivation rate of 1.3 × 10^-3 log reduction/cm min. The Fixed-Quat coated fiberglass mesh also demonstrated successful control of Microcystis aeruginosa with more than 99% inactivation after 10 hr of exposure. The developed antimicrobial mesh was also evaluated with wild-type microalgal species collected in a water body experiencing HABs, obtaining a 97% removal efficiency. Overall, the silica-functionalized Fixed-Quat nanocoating showed promising antimicrobial properties for water disinfection and HABs control, while decreasing concerns related to DBPs formation and the possible release of toxic nanomaterials into the environment.

MS2 coliphage inactivation by Al/Fe PILC-activated Catalytic Wet Peroxide Oxidation: multiresponse statistical optimization

The optimization of the Catalytic Wet Peroxide Oxidation (CWPO) assisted by an Al/Fe-pillared clay (Al/Fe-PILC) was assessed in the inactivation of the MS2 coliphage in the presence of a synthetic surrogate of natural organic matter (NOM). The simultaneous effect of two experimental factors (i) H₂O₂ dose - (H₂O₂)_d (3.00-25.50 % of the H₂O₂ theoretically required for full mineralization) and (ii) catalyst concentration (0.33-2.60 g/L), and four non-controllable variables (covariates) (a) circumneutral pH (6.00-9.00), (b) temperature (5.00-25.0 °C), (c) synthetic NOM concentration (2.0-20.0 mg C/L) and (d) MS2 titer (10⁴, 10⁵ and 10⁶ PFU/mL) was investigated by Response Surface Methodology (RSM). Every response was modeled and maximized: (1) MS2 inactivation, (2) fraction of reacted H₂O₂, (3) decolourization and (4) NOM mineralization. Multi-response optimization via desirability function based on responses (1) to (3) achieved excellent fitting (0.94 out of 1.0) and following set of optimal experimental conditions: 0.33 g Al/Fe-PILC/L, 3.36 % (H₂O₂)_d ​(Fe_active/H₂O₂) = 0.46, giving rise to 92.9 % of MS2 inactivation and 100 % of reacted H₂O₂ at pH 7.07, 25.0 +/- 0.1 °C, 16.06 mg C/L as starting NOM concentration, and MS2 titer of 10⁶ PFU/mL after just 70 min ​of reaction.

Rationally designed tubular coaxial-electrode copper ionization cells (CECICs) harnessing non-uniform electric field for efficient water disinfection

Though well known for its anti-microbial property, copper is usually not considered for drinking water disinfection because of its health risk to human bodies under efficient biocidal concentration. Herein, we have rationally designed and constructed a tubular coaxial-electrode copper ionization cell (CECIC) that enables superior disinfection performance (~6-log removal of E. coli) with a very low effluent copper concentration (~200 μg/L). A non-uniform electric field with enhanced strength near the center electrode is generated in the chamber attributed to the coaxial center-outer electrode configuration. Exposure to the strong electric field subsequently increases the permeability of cell membrane, the excessive uptake of Cu ions into microbes, and thus the reinforced bacteria inactivation. The in-situ ionization results in a Cu ion concentration gradient with higher concentrations in the regions closer to the center. In addition, being driven by the electrophoresis and dielectrophoresis forces, the bacterial cells are transported to the vicinity of the center electrode, where both the electric field strength and Cu ion concentration are higher. These mechanisms in the CECIC synergistically result in the high inactivation efficiency with low Cu concentration in the effluent. The low-cost, high-efficiency, and disinfection-byproduct-free CECIC has shown significant potential in point-of-use applications.

Catalyst-free activation of persulfate by visible light for water disinfection: Efficiency and mechanisms

The development of cost-effective water disinfection methods is highly desired to address the problems caused by outbreak of harmful microorganisms. Sulfate radical (•SO₄^-)-based advanced oxidation technology has attracted increasing attention. However, various catalysts or UV irradiation are usually used to activate persulfate (PS), which is high-cost and the recovery of nano-sized catalysts is also challenging. This work demonstrates a new method of catalyst-free activation of persulfate by visible light (VL) for bacterial inactivation. The 6-log of E. coli cells can be inactivated within 40 min and 7-log of E. coli cells could be inactivated within 120 min by the VL/PS system. The major responsive wavelength is 420 nm, and no heat activation of PS is found during VL irradiation. A synergistic effect with synergy factor of 51.2% is found when combining the VL irradiation with heating at 50 °C. The acidic pH is benefit for the VL/PS-triggered bacterial inactivation, while bicarbonate inhibits the E. coli inactivation at the range of 0.1-20 mg/L. Mechanism study indicates the main reactive species are •SO₄^-, •O₂^- and •OH, in which •SO₄^- plays the most important role. The bacterial inactivation process shows to begin from outer membrane to intracellular components. Subsequently, the antioxidant enzyme (i.e. SOD, CAT) is induced, followed by damaging to the genomic DNA leading to fatal death of the cells. In addition, the VL/PS system is also applicable for the inactivation of other pathogenic bacteria, including Staphylococcus aureus and Pseudomonas aeruginosa, showing universality for water disinfection applications. This work not only provides a new cost-effective disinfection method without a catalyst, but also sheds light on understanding the bacterial inactivation mechanism by •SO₄^--based AOPs.