Antimicrobial Activities of Propolis in Poloxamer Based Topical Gels

Propolis contains a group of compounds with various activities. However, their low solubility is a drawback for the development of pharmaceutical formulations. In this study, poloxamers as a solubilizer and gelling agent were evaluated to develop a topical antimicrobial formulation of propolis. The effects of poloxamer type and concentration on the propolis solubility, release rate, and antimicrobial activities were investigated. Staphylococcus aureus (S. aureus) and Candida albicans (C. albicans) were the representative bacteria and fungi, respectively. At 5%, poloxamer 407 (P407) and poloxamer 188 (P188) enhanced the propolis solubility by 2.86 and 2.06 folds, respectively; at 10%, they were 2.81 and 2.59 folds, respectively. The micelle size in the P188 formulation increased in the presence of propolis, whereas there was no change in the P407 formulation. Release rates of propolis decreased with the P188 concentration increase, which was attributed to viscosity increase. Both P188 and P407 formulations showed antimicrobial activity against S. aureus in a time-kill kinetics assay. However, only the P188 formulation reduced the cell's numbers significantly against C. albicans, compared to the control. We speculate that P188 mixed micelles were more effective in releasing free active compounds to exhibit anti-microbial activity compared to the P407 micelles encapsulating the hydrophobic compounds in their cores. Propolis in P188 formulation is proposed as a potential topical antimicrobial agent based on its activity against both S. aureus and C. albicans.

Development of a sterile morphine hydrogel for the local treatment of painful skin ulcers

OBJECTIVES

It is often difficult to relieve the pain from skin ulcers. In several patients, topical morphine, applied as a hydrogel, has been described as useful. There is no such product commercially available. We present a solution for compounding, packaging, sterilisation and chemical stability of a morphine containing hydrogel.

METHODS

We developed a morphine containing poloxamer 407 thermoreversible hydrogel with a concentration of 5 mg/g (0.5% w/w) morphine hydrochloride. The hydrogel was packaged into a plastic prefillable syringe system: BD Sterifill SCF. This syringe can be steam sterilised after it has been filled.

RESULTS

Sterility tests according to the European Pharmacopoeia showed the product to be sterile directly after production and sterilisation and after 20 months of storage. The stability of the morphine hydrochloride was assessed by monthly analysis of the concentration with a stability indicating HPLC-UV method. Morphine hydrochloride concentrations remained between 90% and 110% of the theoretical concentration for a period of 36 months, when stored at room temperature outside the influence of light.

CONCLUSION

With the described formulation, packaging, sterilisation and stability data, together with the previously reported biopharmaceutical dissolution profile, we present a complete solution for a morphine containing poloxamer 407 hydrogel that can be compounded in any pharmacy with a steam or hot water steriliser at their disposal. This might improve the availability of a sterile morphine hydrogel for the treatment of painful skin ulcers.

Thermosensitive Hydrogel Harboring CD146/IGF-1 Nanoparticles for Skeletal-Muscle Regeneration

In skeletal-muscle regeneration, it is critical to promote efferocytosis of immune cells and differentiation of satellite cells/postnatal muscle stem cells at the damaged sites. With the optimized poloxamer 407 composition gelled at body temperature, the drugs can be delivered locally. The purpose of this study is to develop a topical injection therapeutic agent for muscle regeneration, sarcopenia, and cachexia. Herein, we construct an injectable, in situ hydrogel system consisting of CD146, IGF-1, collagen I/III, and poloxamer 407, termed CIC gel. The secreted CD146 then binds to VEGFR2 on the muscle surface and effectively induces efferocytosis of neutrophils and macrophages. IGF-1 promotes satellite cell differentiation, and biocompatible collagen evades immune responses of the CIC gel. Consequently, these combined molecules activate muscle regeneration via autophagy and suppress muscle inflammation and apoptosis. Conclusively, we provide an applicable concept of the myogenesis-activating protein formulation, broadening the thermoreversible hydrogel to protein therapeutics for damaged muscle recovery.

Thermosensitive Poloxamer-graft-Carboxymethyl Pullulan: A Potential Injectable Hydrogel for Drug Delivery

A thermosensitive copolymer composed of amphiphilic triblock copolymer, poloxamer 407, grafted on hydrophilic pullulan with pendant carboxymethyl groups (CMP) was prepared and characterized. The structure of the new copolymer was assessed by Fourier transform infrared (FT-IR) and ¹H nuclear magnetic resonance (¹H NMR) spectroscopy. The content of the poloxamer in the grafted copolymer was 83.8% (w/w). The effect of the copolymer concentration on the gelation behavior was analyzed by the vertical method and rheological tests; the gel phase of the copolymer occurred at a lower concentration (11%, w/v) as compared with poloxamer (18%, w/v). The starting gelation time under the simulated physiological conditions (phosphate buffer with a pH of 7.4, at 37 °C) was sensitive on the rest temperature before the test, this being 990 s and 280 s after 24 h rest at 4 °C and 20 °C, respectively. The rheological tests evidenced a high elasticity and excellent ability of the copolymer to recover the initial structure after the removal of the applied force or external stimuli. Moreover, the hydrogel has proved a sustained release of amoxicillin (taken as a model drug) over 168 h. Taken together, the results clearly indicate that this copolymer can be used as an injectable hydrogel.

Development of thermosensitive poloxamer 407-based microbubble gel with ultrasound mediation for inner ear drug delivery

ABSTRACTSOur previous study first investigated feasibility of applying ultrasound (US) and microbubbles (MBs) via external auditory canal to facilitate drug delivery into inner ear. However, most drugs are in aqueous formulae and eliminated via Eustachian tubes after drug application. In this study, feasibility of sustained release of thermosensitive poloxamer 407 (P407)-based MB gel for US mediation-enhanced inner ear drug (dexamethasone, DEX) delivery was investigated. The sol-to-gel transition temperature showed that mixture of DEX and only 10% and 12.5% P407 in MBs can be used for in vitro and in vivo drug delivery experiments. In in vitro Franz diffusion experiments, the release rates of 12.5% P407-MBs + US groups in the model using DEX as the delivered reagent at 3 h resulted in values 1.52 times greater than those of 12.5% P407-MBs groups. In guinea pigs, by filling tympanic bulla with DEX in 12.5% P407-MBs (DEX-P407-MBs), USMB applied at post-treatment days 1 and 7 induced 109.13% and 66.67% increases in DEX delivery efficiencies, respectively, compared to the group without US. On the 28th day after US-mediated P407-MB treatment, the safety assessment showed no significant changes in the hearing thresholds and no damage to the integrity of cochlea or middle ear. These are the first results to demonstrate feasibility of US-modified liquid form DEX-P407-MB cavitation for enhancing permeability of round window membrane. Then, a gel form of DEX-P407-MBs was generated and thus prolonged the release of DEX in middle ear to maintain the therapeutic DEX level in inner ear for at least 7 days.

Enhancement of the Mechanical and Drug-Releasing Properties of Poloxamer 407 Hydrogels with Casein

PURPOSE

Topical therapy of local disease (e.g. skin) is advantageous over oral therapy since there is less systemic drug distribution (so fewer side-effects), no first-pass effect, etc. However, patient compliance with topical therapy can be poor as it may require many applications a day and can last months. Here we propose a topical controlled release formulation with thermoresponsive gelation at body temperature and improved adhesiveness, making it easier to remain in contact with the body.

METHODS

The formulation contains two excipients, poloxamer 407 (P407) and casein. Casein can modify the properties of the hydrogel through molecular entanglement. In addition, tissue reaction and drug release profile were evaluated.

RESULTS

Changes in casein concentration affected adhesive strength, viscosity, mechanical properties and drug release, presumably by hydrophobic interactions between casein and P407. Two different concentrations of P407 were tested with two different concentrations of casein. Formulations containing 5% and 10% casein released 80% of model drug in 48 h, while formulations without casein released the same fraction in around 24 h hours. Formulations with 10% casein had almost twice the adhesive strength of those without casein.

CONCLUSIONS

Addition of casein modified the mechanical properties and drug release rate of the hydrogel. There was no inflammation or injury after brief exposure in vivo.

Curcumin micelles entrapped in eudragit S-100 matrix: a synergistic strategy for enhanced oral delivery

Background:

Therapeutic activities of curcumin (CUR) via oral administration are hampered by the lack of bioavailability due to its poor water solubility and rapid degradation in GI tract.

Materials & methods:

This preliminary study developed CUR micelle-eudragit S100 (EUD) dry powder (CM-EDP) spray-dried formulations. Poloxamer 407 was used as a micelle-forming agent and EUD as an entrapping matrix for protection over hydrolysis and enzymes in the GI tract.

Results:

The morphology of CM-EDP showed agglomeration with cratering on the surface of particles. Differential thermal analysis and x-ray diffractometry data exhibited evidence that CUR was converted into amorphous solid. An increased concentration of micelle-forming and dispersion matrix polymers resulted in a high fraction of drug being converted into the amorphous state. A significant increase in dissolution by 7–10 times was achieved compared with that of raw CUR.

Conclusion:

The present study disclosed the CM-EDP potency for future development of CUR oral formulation.

Curcumin (CUR) is a natural compound that shows several pharmacological activities, including anti-inflammatory and potential actions against Parkinson’s and Alzheimer’s. However, several drawbacks need to be addressed its application as a therapeutic agent via oral administration. These drawbacks include its poor water solubility and rapid degradation in the GI tract. The present study developed CUR micelle-eudragit S100 (EUD) dry powder formulation involving poloxamer 407 as solubilizing agent and EUD as entrapping matrix for protection in acidic environments and the enzymes in the GI tract. The final product is in the form of dry powder, which showed potency in enhancing CUR absorption following oral administration.

Generation of SARS-CoV-2 Spike Pseudotyped Virus for Viral Entry and Neutralization Assays: A 1-Week Protocol

The COVID-19 pandemic caused by the SARS-CoV-2 coronavirus requires reliable assays for studying viral entry mechanisms which remains poorly understood. This knowledge is important for the development of therapeutic approaches to control SARS-CoV-2 infection by permitting the screening for neutralizing antibodies and other agents that can block infection. This is particularly important for patients who are at high risk for severe outcomes related to COVID-19. The production of pseudotyped viral particles may seem like a daunting task for a non-virology laboratory without experience in the two most commonly used pseudotyping systems, namely retro/lentiviruses and vesicular stomatitis virus (VSV) which lacks the VSV envelope glycoprotein (VSVΔG). By incorporating the most up-to-date knowledge, we have developed a detailed, easy-to-follow novel protocol for producing SARS-CoV-2 spike-bearing pseudovirus using the VSV-ΔG system. We describe the infection assay which uses GFP fluorescence as a measure of infection in a 24-well live imaging system. We present results of our optimization of the system to enhance viral infection levels through the over-expression of human ACE2 receptor and the overexpression of at least one of two proteases - TMPRSS2 or Furin, as well as, supplementation with Poloxamer 407 (P407) and Prostaglandin E2 (PGE2) as adjuvants. We show that the system works efficiently in three unrelated, clinically relevant cell lines: human 293T (renal epithelial) cells, human Calu-3 (lung epithelial) cells, and the non-human primate (African Green Monkey) cell line, Vero-E6 (renal epithelial) cells. In addition, we have used this system to show infection of human induced pluripotent stem cell-derived cardiomyocytes (iPS-CMs). This system is efficient (virus generation, titration, and infection assays can be performed in 1 week), quantitative, inexpensive, and readily scalable for application in drug development and therapeutic screening approaches.

Melatonin nanogel promotes skin healing response in burn wounds of rats

Aim: Development of a melatonin nanogel intended for wound healing (WH) application. Materials & methods: The main components of the nanogel were poloxamer 407, chitosan and hyaluronic acid. The nanogel was characterized by the assessment of physical interactions, swelling, wettability, rheological properties and internal structure. The drug release, antimicrobial efficacy against different strains and biocompatibility with human keratinocytes were also tested. Finally, the WH efficacy was evaluated in rats. Results: The nanogel showed optimal physicochemical properties and an internal network of interconnected channels from which melatonin was released following first order kinetics. Antimicrobial activity was similar to commercial reference material and it promoted epidermis growth with evident wound contraction. Conclusion: Melatonin nanogel can be proposed as a promising system for WH.

Rutin-Loaded Poloxamer 407-Based Hydrogels for In Situ Administration: Stability Profiles and Rheological Properties

Rutin is a flavone glycoside contained in many plants, and exhibits antioxidant, anti-inflammatory, anticancer, and wound-healing properties. The main disadvantage related to the use of this molecule for pharmaceutical application is its poor bioavailability, due to its low solubility in aqueous media. Poloxamer 407-hydrogels show interesting thermo-sensitive properties that make them attractive candidates as pharmaceutical formulations. The hydrophobic domains in the chemical structure of the copolymer, a polymer made up of two or more monomer species, are useful for retaining poorly water-soluble compounds. In this investigation various poloxamer 407-based hydrogels containing rutin were developed and characterized as a function of the drug concentration. In detail, the Turbiscan stability index, the micro- and dynamic rheological profiles and in vitro drug release were investigated and discussed. Rutin (either as a free powder or solubilized in ethanol) did not modify the stability or the rheological properties of these poloxamer 407-based hydrogels. The drug leakage was constant and prolonged for up to 72 h. The formulations described are expected to represent suitable systems for the in situ application of the bioactive as a consequence of their peculiar versatility.

Thermoresponsive systems composed of poloxamer 407 and HPMC or NaCMC: mechanical, rheological and sol-gel transition analysis

Poloxamer 407 (polox407) is widely studied as thermogelling polymer, transitioning to a gel state when warmed Polox407 forms weak hydrogels with rapid dissolution in excess solvent. This study reports the development of binary systems composed of polox407 and hydroxypropyl methylcellulose (HPMC) or sodium carboxymethylcellulose (NaCMC) aiming to improve the rheological and mechanical properties of the hydrogel. The interaction between polox407 and cellulose derivatives was studied, and their interaction with biological surfaces predicted. The carbohydrates affected the mechanical and rheological behavior of polox407 in different ways, dependent on polymer type, concentration, and temperature. T_sol/gel and rheological interaction parameters were useful to select the most suitable formulations for topical or local application. Most of the binary systems exhibited plastic behavior, thixotropy and viscoelastic properties. Appropriate formulations were identified for local application, such as 17.5/3; 17.5/4; 20/3 and 20/4 (%, w/w) for polox407/HPMC; and 17.5/1; 17.5/1.5; 20/1 and 20/1.5 (%, w/w) for polox407/NaCMC.

Expert design and desirability function approach for the development of diazepam thermally sensitive rectal gel

Aim: The aim of the present work was to develop an in situ thermosensitive rectal gel for diazepam by using Expert-design for improving three factors and a three-level process was formed by using a cold method. Methods & materials: Response surface design was utilized to investigate the effect of independent variables like sodium chloride (NaCl, X1), poloxamer 407 (F-127, X2) and diazepam (X3), on different dependent variables such as gelation temperature, mucoadhesive strength, drug content, along with permeation and stability. Results: The obtained results revealed that the addition of diazepam enhanced the gelation temperature of hydrogel while it decreased the gel strength and mucoadhesive force. Conclusion: It is suggested that in situ hydrogels may be suitable candidates for rectal delivery.

Design of a nanostructured mucoadhesive system containing curcumin for buccal application: from physicochemical to biological aspects

Mucoadhesive nanostructured systems comprising poloxamer 407 and Carbopol 974P® have already demonstrated good mucoadhesion, as well as improved mechanical and rheological properties. Curcumin displays excellent biological activity, mainly in oral squamous cancer; however, its physicochemical characteristics hinder its application. Therefore, the aim of this study was to develop nanostructured formulations containing curcumin for oral cancer therapy. The photophysical interactions between curcumin and the formulations were elucidated by incorporation kinetics and location studies. They revealed that the drug was quickly incorporated and located in the hydrophobic portion of nanometer-sized polymeric micelles. Moreover, the systems displayed plastic behavior with rheopexy characteristics at 37 °C, viscoelastic properties and a gelation temperature of 36 °C, which ensures increased retention after application in the oral cavity. The mucoadhesion results confirmed the previous findings with the nanostructured systems showing a residence time of 20 min in porcine oral mucosa under flow system conditions. Curcumin was released after 8 h and could permeate through the porcine oral mucosa. Cytotoxicity testing revealed that the formulations were selective to cancer cells over healthy cells. Therefore, these systems could improve the physicochemical characteristics of curcumin by providing improved release and permeation, while selectivity targeting cancer cells.

Ex Vivo Conjunctival Retention and Transconjunctival Transport of Poorly Soluble Drugs Using Polymeric Micelles

This paper addresses the problem of ocular delivery of lipophilic drugs. The aim of the paper is the evaluation of polymeric micelles, prepared using TPGS (d-α-Tocopheryl polyethylene glycol 1000 succinate), a water-soluble derivative of Vitamin E and/or poloxamer 407, as a vehicle for the ocular delivery of dexamethasone, cyclosporine, and econazole nitrate. The research steps were: (1) characterize polymeric micelles by dynamic light scattering (DLS) and X-ray scattering; (2) evaluate the solubility increase of the three drugs; (3) measure the in vitro transport and conjunctiva retention, in comparison to conventional vehicles; (4) investigate the mechanisms of enhancement, by studying drug release from the micelles and transconjunctival permeation of TPGS; and (5) study the effect of micelles application on the histology of conjunctiva. The data obtained demonstrate the application potential of polymeric micelles in ocular delivery, due to their ability to increase the solubility of lipophilic drugs and enhance transport in and across the conjunctival epithelium. The best-performing formulation was the one made of TPGS alone (micelles size ≈ 12 nm), probably because of the higher mobility of these micelles, an enhanced interaction with the conjunctival epithelium, and, possibly, the penetration of intact micelles.

Structural characterization and hypolipidemic activities of purified stigma maydis polysaccharides

This study aimed to investigate structural features and antihyperlipidemic effects of the stigma maydis polysaccharide, termed SMP-1. This polysaccharide was composed of D-mannose, L-rhamnose, D-glucose, D-galactose, L-arabinose, D-xylose, and D-galacturonic acid, with a molar ratio of 1.00:0.21:1.41:1.44:0.70:0.44:0.56. The SMP-1 was mainly bonded by (1 → 6) and (1 → 3) linkages, with various monosaccharides being evenly distributed in the main and side chains. Moreover, SMP-1 had neither triple-helical structure nor molecular aggregation. Importantly, the SMP-1 could effectively bind the bile acids in vitro and significantly lower the total cholesterol, triglyceride, low-density lipoprotein cholesterol levels, and moderately increase the high-density lipoprotein cholesterol level in poloxamer 407-induced hyperlipidemic mice. Moreover, pretreatment with SMP-1 (≥300 mg/kg) could remarkably reduce fat accumulation and restore hepatocyte morphology in the liver of hyperlipidemic mice. Altogether, these findings indicated that SMP-1 could be developed as a safe and effective food supplement for preventing and treating hyperlipidemic disorders.

Thermoreversible Gel-Loaded Amphotericin B for the Treatment of Dermal and Vaginal Candidiasis

The present study was designed to develop a thermoreversible gel of Pluronic (P407) loaded amphotericin B (AmB-gel) for the dermal and vaginal treatment of candidiasis. P407 was used as a copolymer to exploit potential advantages related to increasing drug concentration in the tissue layer in order to provide a local effect. Parameters including internal structure, swelling, porosity, and short-term stability were determined. In addition, drug release profile and ex vivo skin and vaginal permeation studies were carried out. Antifungal efficacy was evaluated against strains of Candida spp. and atomic force microscopy (AFM) supported the results. The tolerance of AmB-gel was studied by evaluating biomechanical properties of skin and determining the irritation level in scarified rabbit skin supported by histological analysis. Results confirmed the development of a thermoreversible AmB-gel with high porosity exhibiting Newtonian behavior at 4 °C and pseudoplasticity at 32 °C as well as optimal stability for at least 90 days. The Amb-gel provided a sustained drug release following a Boltzmann sigmoidal model. Non permeation was observed in skin and vaginal mucosa, showing a high retained amount of AmB of 960.0 and 737.3 µg/g/cm², respectively. In vitro antifungal efficacy showed that AmB-gel was more effective than Free-AmB in inhibiting strains of Candida spp. and these results were corroborated by AFM. Finally, tolerance studies showed that its application did not induce skin irritation nor alter its biophysical properties. Together, these results confirmed that AmB-gel could be proposed as a promising candidate for the clinical status in the treatment of skin and vaginal candidiasis.

Effect of the hyaluronic acid-poloxamer hydrogel on skin-wound healing: in vitro and in vivo studies

BACKGROUND

Recent research into skin injury and wound healing has focused mainly on post-trauma hemostasis, infection prevention, dermal regeneration and angiogenesis. However, less attention has been paid to air permeability and moisture loss prevention which also play important roles in injury healing.

METHODS

In the present work, we prepared a hyaluronic acid-poloxamer (HA-POL) hydrogel and tested the therapeutic effect of the hydrogel on skin-wound healing.

RESULTS

The HA-POL hydrogel transformed from sol to gel at 30°C, close to body temperature, and had stable moisturizing properties. HA-POL hydrogel promoted skin-wound healing and increased protein accumulation in the wound area. HA-POL hydrogel allowed greater air permeability than Band-aid, a typical wound covering. Results from transwell assays showed that the HA-POL hydrogel effectively isolated skin-wounds from bacterial invasion.

CONCLUSION

This work demonstrates the advantages of using HA-POL gel materials in the treatment of cutaneous wounds.

Addition of free poloxamer 407 to a new gene vector P407-PEI-K12 solution forms a sustained-release in situ hypergel that enhances cell transfection and extends gene expression

To address the concern around the efficiency/cytotoxicity ratio and the tumor-targeting effects of polyethylenimine (PEI), is a non-viral gene vector used for the delivery of the cancer therapy gene, poloxamer 407 (P407)-PEI-K12, was synthesized by cross-linking low-molecular weight PEI with P407 and further coupling a bifunctional peptide, K12, which is comprised of the tumor-targeting peptide tLyP-1 and the nuclear localization sequence. Furthermore, the addition of free P407 into the polymer/DNA complex solution produced a temperature-sensitive in situ gel-P407/P407-PEI-K12/DNA complex, which improved the effects of sustained-release gene delivery and transfection efficiency. The specificity, cytotoxicity and gene transfection efficiency of P407-PEI-K12 was investigated in Hela cells in vitro. The polymer efficiently prevented the degradation of plasmid DNA by DNase I and had a marked ability for serum tolerance. Agarose gel electrophoresis revealed that plasmid DNA was efficiently condensed and protected. The higher transfection efficiency of P407-PEI-K12h (the molar ratio of P407-PEI and K12 is 1:10) was achieved with a polymer and plasmid DNA ratio (w/w) of 20:1. The ability of free P407 to promote the transfection of the polymer/DNA complex was high (0.09%). The half-life of the P407/P407-PEI-K12-h/DNA gel complex was 228 min, and the transfection efficiency of the P407/P407-PEI-K12-h/DNA complex was markedly higher compared to that of the P407-PEI-K12-h/DNA complex at various release times.

Drug-Loaded Biocompatible Nanocarriers Embedded in Poloxamer 407 Hydrogels as Therapeutic Formulations

Hydrogels are three-dimensional networks of hydrophilic polymers able to absorb and retain a considerable amount of water or biological fluid while maintaining their structure. Among these, thermo-sensitive hydrogels, characterized by a temperature-dependent sol–gel transition, have been massively used as drug delivery systems for the controlled release of various bioactives. Poloxamer 407 (P407) is an ABA-type triblock copolymer with a center block of hydrophobic polypropylene oxide (PPO) between two hydrophilic polyethyleneoxide (PEO) lateral chains. Due to its unique thermo-reversible gelation properties, P407 has been widely investigated as a temperature-responsive material. The gelation phenomenon of P407 aqueous solutions is reversible and characterized by a sol–gel transition temperature. The nanoencapsulation of drugs within biocompatible delivery systems dispersed in P407 hydrogels is a strategy used to increase the local residence time of various bioactives at the injection site. In this mini-review, the state of the art of the most important mixed systems made up of colloidal carriers localized within a P407 hydrogel will be provided in order to illustrate the possibility of obtaining a controlled release of the entrapped drugs and an increase in their therapeutic efficacy as a function of the biomaterial used.

Mucosal Applications of Poloxamer 407-Based Hydrogels: An Overview

Poloxamer 407, also known by the trademark Pluronic^® F127, is a water-soluble, non-ionic triblock copolymer that is made up of a hydrophobic residue of polyoxypropylene (POP) between the two hydrophilic units of polyoxyethylene (POE). Poloxamer 407-based hydrogels exhibit an interesting reversible thermal characteristic. That is, they are liquid at room temperature, but they assume a gel form when administered at body temperature, which makes them attractive candidates as pharmaceutical drug carriers. These systems have been widely investigated in the development of mucoadhesive formulations because they do not irritate the mucosal membranes. Based on these mucoadhesive properties, a simple administration into a specific compartment should maintain the required drug concentration in situ for a prolonged period of time, decreasing the necessary dosages and side effects. Their main limitations are their modest mechanical strength and, notwithstanding their bioadhesive properties, their tendency to succumb to rapid elimination in physiological media. Various technological approaches have been investigated in the attempt to modulate these properties. This review focuses on the application of poloxamer 407-based hydrogels for mucosal drug delivery with particular attention being paid to the latest published works.

Formulation and in vitro evaluation of a thermoreversible mucoadhesive nasal gel of itopride hydrochloride

Itopride hydrochloride (ITO HCl) is a prokinetic agent, used in the treatment of gastrointestinal motility disorders. The aim of the study was to develop stable mucoadhesive thermoreversible nasal gel to avoid first pass effect. ITO HCl was incorporated into the blends of thermoreversible polymers like poloxamer 407 and various mucoadhesive polymers in different concentrations to increase the contact of the formulations with nasal mucosa. The compatibility between the drug and the suggested polymers was studied by Fourier transform infrared and differential scanning calorimetry (DSC). The formulations were evaluated for clarity, pH, gelation temperature, mucoadhesive strength, gel strength, viscosity, and drug content. In addition, the in vitro drug release and the dissolution efficiency (DE)% were measured. The optimized formulations that showed the highest dissolution efficiency% (DE%) in saline phosphate buffer of pH 6.4 at 35 ± 0.5 °C were chosen for stability testing at temperatures of 4 ± 2 and 25 ± 2 °C/60 ± 5% RH. It was found that F1 and F17 that contain 18% w/v poloxamer 407 and 0.5% w/v of hydroxypropylmethyl cellulose K4M or methyl cellulose (MC), respectively, showed higher stability results as indicated by their higher t₉₀ values (days).

Thermosensitive Poloxamer 407/Poly(Acrylic Acid) Hydrogels with Potential Application as Injectable Drug Delivery System

Thermosensitive hydrogels are of great interest for in situ gelling drug delivery. The thermosensitive vehicle with a gelation temperature in a range of 30-36°C would be convenient to be injected as liquid and transform into gel after injection. To prepare novel hydrogels gelling near body temperature, the gelation temperature of poloxamer 407 (PX) were tailored by mixing PX with poly(acrylic acid) (PAA). The gelation behaviors of PX/PAA systems as well as the interaction mechanism were investigated by tube inversion, viscoelastic, shear viscosity, DSC, SEM, and FTIR studies. The gelation temperature of the plain PX solutions at high concentration of 18, 20, and 22% (w/w) gelled at temperature below 28°C, which is out of the suitable temperature range. Mixing PX with PAA to obtain 18 and 20% (w/w) PX with 1% (w/w) PAA increased the gelation temperature to the desired temperature range of 30-36°C. The intermolecular entanglements and hydrogen bonds between PX and PAA may be responsible for the modulation of the gelation features of PX. The mixtures behaved low viscosity liquid at room temperature with shear thinning behavior enabling their injectability and rapidly gelled at body temperature. The gel strength increased, while the pore size decreased with increasing PX concentration. Metronidazole, an antibiotic used for periodontitis, was incorporated into the matrices, and the drug did not hinder their gelling ability. The gels showed the sustained drug release characteristic. The thermosensitive PX/PAA hydrogel could be a promising injectable in situ gelling system for periodontal drug delivery.

Topical antifungal bigels: Formulation, characterization and evaluation

Bigels with antifungal substances, ciclopirox olamine and terbinafine hydrochloride, were made of hydrogel (poloxamer 407 gel) and oleogel (polyethylene and liquid paraffin mixture). Prepared bigels were found physically stable at room temperature for six months and at least four months at 40 °C. Released amount of drug decreased when oleogel concentration in the formulation increased. Release test results depended on the insertion place of active substances. The amount of released substance was highest when ciclopirox olamine was incorporated in both phases in an equal quantity, and terbinafine hydrochloride in oleogel or in hydrogel. All formulations showed great inhibition of Microsporum canis. Thus, bigels with ciclopirox olamine and terbinafine hydrochloride are a promising dosage form for topical use.

Application of Fluorescence Emission for Characterization of Albendazole and Ricobendazole Micellar Systems: Elucidation of the Molecular Mechanism of Drug Solubilization Process

Albendazole (ABZ) and ricobendazole (RBZ) are referred to as class II compounds in the Biopharmaceutical Classification System. These drugs exhibit poor solubility, which profoundly affects their oral bioavailability. Micellar systems are excellent pharmaceutical tools to enhance solubilization and absorption of poorly soluble compounds. Polysorbate 80 (P80), poloxamer 407 (P407), sodium cholate (Na-C), and sodium deoxycholate (Na-DC) have been selected as surfactants to study the solubilization process of these drugs. Fluorescence emission was applied in order to obtain surfactant/fluorophore (S/F) ratio, critical micellar concentration, protection efficiency of micelles, and thermodynamic parameters. Systems were characterized by their size and zeta potential. A blue shift from 350 to 345 nm was observed when ABZ was included in P80, Na-DC, and Na-C micelles, while RBZ showed a slight change in the fluorescence band. P80 showed a significant solubilization capacity: S/F values were 688 for ABZ at pH 4 and 656 for RBZ at pH 6. Additionally, P80 micellar systems presented the smallest size (10 nm) and their size was not affected by pH change. S/F ratio for bile salts was tenfold higher than for the other surfactants. Quenching plots were linear and their constant values (2.17/M for ABZ and 2.29/M for RBZ) decreased with the addition of the surfactants, indicating a protective effect of the micelles. Na-DC showed better protective efficacy for ABZ and RBZ than the other surfactants (constant values 0.54 and 1.57/M, respectively), showing the drug inclusion into the micelles. Entropic parameters were negative in agreement with micelle formation.

Thermo-sensitive composite hydrogels based on poloxamer 407 and alginate and their therapeutic effect in embolization in rabbit VX2 liver tumors

Interventional embolization therapy is an effective, most widely used method for inoperable liver tumors. Blood-vessel-embolic agents were essential in transarterial embolization (TAE). In this work, thermo-sensitive composite hydrogels based on poloxamer 407, sodium alginate, hydroxymethyl cellulose and iodixanol (PSHI), together with Ca2+ (PSHI-Ca2+) were prepared as liquid embolic agents for TAE therapy to liver cancer. With increasing temperature, PSHI exhibited two phase states: a flowing sol and a shrunken gel. Rheology tests showed good fluidity and excellent viscoelastic behavior with a gelation temperature (GT) of 26.5°C. The studies of erosion indicated that PSHI had calcium ion-related erosion characteristics and showed a slow erosion rate in an aqueous environment. When incubated with L929 cells, the thermo-sensitive composite hydrogels had low cytotoxicity in vitro. The results of analyzing the digital subtraction angiography and computed tomography images obtained from in vitro and in vivo assays indicated a good embolic effect in the renal arteries of normal rabbits. Angiography and histological studies on VX2 tumor-bearing rabbits indicated that PSHI-Ca2+ successfully occluded the tumors, including the peripheral vessels. In conclusion, PSHI-Ca2+ was a promising embolic agent for transarterial embolization therapy.