Preparation of Oily Sludge-Derived Activated Carbon and Its Adsorption Performance for Tetracycline Hydrochloride

Oily sludge-derived activated carbon was prepared using the potassium hydroxide (KOH) activation method using oily sludge as a raw material, and one-factor experiments determined the best conditions for preparing activated carbon. The activated carbon's morphological structure and surface chemical properties were analyzed by scanning different characterization tools, and the adsorption behavior of tetracycline hydrochloride was investigated. The results showed that the optimum conditions for preparing oily sludge-derived activated carbon were an activation temperature of 400 °C, activation time of 30 min, activator concentration of 1 mol/L, and impregnation ratio of 2 mL/g. After activation, the activated carbon had more pores and a more orderly crystal structure arrangement, the specific surface area was 2.07 times higher than that before activation, and the surface was rich in functional groups such as -HO, -C-O, -C=C, and -C-H, which increased the active sites of activated carbon. Physicochemical effects dominated the adsorption process. It belonged to the spontaneous heat absorption process under the quasi-secondary kinetic and Langmuir isothermal models. The maximum monolayer adsorption capacity of KOH-activated carbon was 205.1 mg·g-1.

Haemostatic discs demonstrate physical efficacy against microbes commonly associated with central-line-associated bloodstream infections

BACKGROUND

Vascular access devices form an essential component in the management of acute and chronic medical conditions. Introduction and ongoing management of these devices are linked with bundles of care aimed at reducing associated risks including bleeding and infection.

AIM

To evaluate the antimicrobial potential of the potassium ferrate haemostatic disc on Gram-positive (Staphylococcus aureus) and Gram-negative (Klebsiella pneumoniae, Pseudomonas aeruginosa) bacteria and on Candida albicans.

METHODS

The impact of the potassium ferrate disc was compared with the often-used chlorhexidine gluconate (CHG) impregnated disc to evaluate the potential efficacy of the potassium ferrate disc as an alternative to CHG in cases with an increased risk of active bleeding.

RESULTS

In the presence of anticoagulated blood, we observed an inhibitory effect of the haemostatic disc on microbial growth for microbial strains commonly associated with vascular access device related infections.

CONCLUSION

Our results indicate that the potassium ferrate disc may provide dual clinical benefits with both haemostatic and antimicrobial action observed during in-vitro testing.

Effect of dipotassium phosphate addition and heat on proteins and minerals in milk protein beverages

Our objective was to determine the effects of dipotassium phosphate (DKP) addition, heat treatments (no heat, high temperature, short time [HTST]: 72°C for 15 s, and direct steam injection UHT: 142°C for 2.3 s), and storage time on the soluble protein composition and mineral (P, Ca, K) concentration of the aqueous phase around casein micelles in 7.5% milk protein-based beverages made with liquid skim milk protein concentrate (MPC) and micellar casein concentrate (MCC). Milk protein concentrate was produced using a spiral wound polymeric membrane, and MCC was produced using a 0.1-µm ceramic membrane by filtration at 50°C. Two DKP concentrations were used (0% and 0.15% wt/wt) within each of the 3 heat treatments. All beverages had no other additives and ran through heat treatment without coagulation. Ultracentrifugation (2-h run at 4°C) supernatants of the beverages were collected at 1, 5, 8, 12, and 15-d storage at 4°C. Phosphorus, Ca, and K concentrations in the beverages and supernatants were measured using inductively coupled plasma spectrometry. Protein composition of supernatants was measured using Kjeldahl and sodium dodecyl sulfate-PAGE. Micellar casein concentrate and MPC beverages with 0.15% DKP had higher concentrations of supernatant protein, Ca, and P than beverages without DKP. Protein, Ca, and P concentrations were higher in MCC supernatant than in MPC supernatant when DKP was added, and these concentrations increased over storage time, especially when lower heat treatments (HTST or no heat treatment) had been applied. Dipotassium phosphate addition caused the dissociation of αS-, β-, and κ-casein, and casein proteolysis products out of the casein micelles, and DKP addition explained over 70% of the increase in supernatant protein, P, and Ca concentrations. Dipotassium phosphate could be removed from 7.5% of protein beverages made with fresh liquid MCC and MPC (containing a residual lactose concentration of 0.6% to 0.7% and the proportional amount of soluble milk minerals), as these beverages maintain heat-processing stability without DKP addition.

Study on the removal of fulvic acid in water by potassium ferrate-enhanced iron-manganese co-oxide film and its mechanism

The previous studies have shown that iron-manganese co-oxide film (MeOx) could simultaneously remove ammonium, manganese ion and bisphenol A. In this study, the removal of fulvic acid (FA) was explored by adding potassium ferrate (K2FeO4) to heighten the catalytic activity of MeOx. After adding about 3.0 mg/L potassium ferrate, the elimination efficiency of 7.0 mg/L FA by the MeOx increased from 20 to 50%. The effects of temperature and ammonium on the elimination of FA were investigated. Higher temperature (above 22 °C) and higher ammonium concentration (above 2.0 mg/L) caused a decrease in FA removal. Most of FA combined with the ferric hydroxide colloid produced by K2FeO4 in water to form macromolecular groups, and they were subsequently absorbed and covered on the surface of MeOx. Scanning electron microscope showed that more viscous flocs appeared on the surface of MeOx, and the film thickness became thicker. Electron energy-dispersive spectrometer analysis revealed a notable increased in the C-O element ratio and a significant decreased in the Mn-Fe element ratio on the surface of MeOx. From Fourier transform infrared spectroscopy, the content of transition metal carbonyl compounds increased in the surface of MeOx. XPS analysis confirmed that the presence of Fe3O4, FeO, Mn2O3 and Mn3O4 along with functional group substances of FA attached on the surface of MeOx. The removal mechanism of FA was studied.

Effect and its mechanism of potassium persulfate on aerobic composting process of vegetable wastes

Vegetable waste (VW) is a potential organic fertilizer resource. As an important way to utilize vegetable wastes, aerobic composting of VW generally has the problems of long fermentation cycle and incomplete decomposition of materials. In this study, 0.3-1.2% of potassium persulfate (KPS) was added to promote the maturity of compost. The results showed that the addition of KPS promoted the degradation of materials, accelerated the temperature rise of compost. KPS also promoted the formation of humic substances (HS). Compared with the control, HS contents of treatments with KPS addition increased by 7.81 ~ 17.52%. Fourier transform infrared (FTIR) spectroscopy and scanning electron microscope (SEM) analysis reveal the mechanism of KPS affecting the composting process: KPS stimulated the degradation of various organic substances such as lignin at high temperature stage, and the degradation of lignin could accelerate the release and decomposition of other components; KPS made the structure of the material looser, with more voids and pores, and more specific surface area of the material, which was more suitable for microbial degradation activities. Therefore, the addition of KPS can promote the decomposition of organic matter in the early stage of composting, accelerate the process of thermophilic phase, and shorten the composting process and improve product maturity.

Synergistic leaching process for ion-exchange ammonium from weathered crust elution deposited rare earth tailings with potassium magnesium compound eluent

The ion-exchangeable ammonium (IE-A) that accounts for 60-90% of the total residual ammonium in rare earth tailings has great potential to pollute the surrounding environment, and much research has been done to seek an effective elution method. However, the current study mainly focused on the single salt solution, which made it hard to reach the desired elution efficiency. In this study, the efficient binary compound eluent was prepared, and the response surface experiments and dynamic elution were performed to optimize the elution condition and evaluate the practical application prospect. Batch experimental results showed that the best IE-A elution efficiency could be achieved at the K:Mg molar ratio of 8:2, the liquid-solid ratio of 26:1, and the concentration of 0.1 mol/L at the natural solution pH. Dynamic experimental results indicated that a higher concentration, flow rate, and elution temperature could all accelerate the elution process, and the highest elution efficiency could reach 99%. The fitting results by shrinking core models show that the apparent activation energy of IE-A was 4.24 kJ/mol in the temperature range of 288-328 K, and the reaction order was 0.16. XPS and FTIR revealed that IE-A was effectively eluted by a potassium and magnesium compound leaching agent via an ion-exchange reaction. Overall, the developed compound solution with potassium and magnesium is a candidate for an elution agent that could be used to remove residual ammonium in a closed field of rare earth ores.

Dermatophyte antigen kit: A useful diagnostic tool for onychomycosis

A dermatophyte antigen kit (DQT) was released in Japan as an in vitro diagnostic tool to identify tinea unguium in June 2022. From July 2022 to February 2023, we examined 75 potassium hydroxide (KOH)-negative patients (male, n = 23; female, n = 52; mean ± SD age, 63.6 ± 13.9 years) and determined the accuracy in confirming the fungal element with ZoomBlue™ staining at 400× magnification. The DQT results were classified into three categories. DQT-positive onychomycosis was detected in 27 patients with tinea unguium and two with non-dermatophyte onychomycosis. Fungal cultures were positive in 14 (51.8%) patients (Trichophyton rubrum [n = 11], T. interdigitale [n = 1], Fusarium solani [n = 1], and Talaromyces muroii [n = 1]). DQT-negative onychomycosis included ten patients with cured tinea unguium and 3 with Candida onychomycosis. Twenty-three patients had DQT-negative mimics for onychomycosis (onychauxis [n = 11], traumatic onycholysis [n = 8], yellow nail syndrome [n = 5], pincer nail deformity [n = 3], brittle nail syndrome [n = 2], contact dermatitis [n = 2], lichen planus [n = 1] and psoriasis [n = 1]). Because sparse, atrophic and/or fragmented mycelia are invisible in direct microscopy with potassium hydroxide (KOH) at 100× magnification, DQT was beneficial for diagnosing onychomycosis.

Contribution identification of hydrolyzed products of potassium ferrate on promoting short-chain fatty acids production from waste activated sludge

Potassium ferrate (K2FeO4) has been extensively employed to promote short-chain fatty acids (SCFAs) production from anaerobic fermentation of waste activated sludge (WAS) because of its potent oxidizing property and formation of alkaline hydrolyzed products (potassium hydroxide, KOH and ferric hydroxide, Fe(OH)3). However, whether K2FeO4 actually works as dual functions of both an oxidizing agent and an alkalinity enhancer during the anaerobic fermentation process remains uncertain. This study aims to identify the contributions of hydrolyzed products of K2FeO4 on SCFAs production. The results showed that K2FeO4 did not execute dual functions of oxidization and alkalinity in promoting SCFAs production. The accumulation of SCFAs using K2FeO4 treatment (183 mg COD/g volatile suspended solids, VSS) was less than that using either KOH (192 mg COD/g VSS) or KOH & Fe(OH)3 (210 mg COD/g VSS). The mechanism analysis indicated that the synergistic effects caused by oxidization and alkalinity properties of K2FeO4 did not happen on solubilization, hydrolysis, and acidogenesis stages, and the inhibition effect caused by K2FeO4 on methanogenesis stage at the initial phase was more severe than that of its hydrolyzed products. It was also noted that the inhibition effects of K2FeO4 and its hydrolyzed products on the methanogenesis stage could be relieved during a longer sludge retention time, and the final methane yields using KOH or KOH & Fe(OH)3 treatment were higher than that using K2FeO4, further confirming that dual functions of K2FeO4 were not obtained. Therefore, K2FeO4 may not be an alternative strategy for enhancing the production of SCFAs from WAS compared to its alkaline hydrolyzed products. Regarding the strong oxidization property of K2FeO4, more attention could be turned to the fates of refractory organics in the anaerobic fermentation of WAS.

Microscopic evidence of sandstone deterioration and damage by fungi isolated from the Angkor monuments in simulation experiments

The Angkor monuments have been registered on the World Cultural Heritage List of UNESCO, while the buildings built mostly of sandstone are suffering from serious deterioration and damage. Microorganisms are one of the leading causes for the sandstone deterioration. Identification of the mechanisms underlying the biodeterioration is of significance because it reveals the biochemical reaction involved so that effective conservation and restoration of cultural properties can be achieved. In this study, the fungal colonization and biodeterioration of sandstone in simulation experiments were examined using confocal reflection microscopy (CRM) and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS). Aspergillus sp. strain AW1 and Paecilomyces sp. strain BY8 isolated from the deteriorated sandstone of Angkor Wat and Bayon of Angkor Thom, respectively, were inoculated and incubated with the sandstone used for construction of Angkor Wat. With CRM, we could visualize that strain AW1 tightly attached to and broke in the sandstone with extension of the hyphae. Quantitative imaging analyses showed that the sandstone surface roughness increased and the cavities formed under the fungal hyphae deepened during the incubation of strains AW1 and BY8. These highlighted that the massive growth of fungi even under the culture conditions was associated with the cavity formation of the sandstone and its expansion. Furthermore, SEM-EDS indicated the flat and Si-rich materials, presumably quartz and feldspar, were found frequently at the intact sandstone surface. But the flatness was lost during the incubation, possibly due to the detachment of the Si-rich mineral particles by the fungal deterioration. Consequently, this study proposed a biodeterioration model of the sandstone in that the hyphae of fungi elongated on the surface of the sandstone to penetrate into the soft and porous sandstone matrix, damaging the matrix and gradually destabilize the hard and Si-rich minerals, such as quartz and feldspar, to the collapse and cavities.

Analysis of the Potassium-Solubilizing Priestia megaterium Strain NK851 and Its Potassium Feldspar-Binding Proteins

Potassium-solubilizing bacteria are an important microbial group that play a critical role in releasing mineral potassium from potassium-containing minerals, e.g., potassium feldspar. Their application may reduce eutrophication caused by overused potassium fertilizers and facilitate plants to utilize environmental potassium. In this study, a high-efficiency potassium-solubilizing bacterium, named NK851, was isolated from the Astragalus sinicus rhizosphere soil. This bacterium can grow in the medium with potassium feldspar as the sole potassium source, releasing 157 mg/L and 222 mg/L potassium after 3 days and 5 days of incubation, respectively. 16S rDNA sequencing and cluster analysis showed that this strain belongs to Priestia megaterium. Genome sequencing further revealed that this strain has a genome length of 5,305,142 bp, encoding 5473 genes. Among them, abundant genes are related to potassium decomposition and utilization, e.g., the genes involved in adherence to mineral potassium, potassium release, and intracellular trafficking. Moreover, the strong potassium-releasing capacity of NK851 is not attributed to the acidic pH but is attributed to the extracellular potassium feldspar-binding proteins, such as the elongation factor TU and the enolase that contains potassium feldspar-binding cavities. This study provides new information for exploration of the bacterium-mediated potassium solubilization mechanisms.

The Effect of Potassium Nitrate Supplementation on the Force and Properties of Extensor digitorum longus (EDL) Muscles in Mice

Adding potassium nitrate (KNO3) to the diet improves the physiological properties of mammalian muscles (rebuilds weakened muscle, improves structure and functionality). The aim of this study was to investigate the effect of KNO3 supplementation in a mouse model. BALB/c mice were fed a KNO3 diet for three weeks, followed by a normal diet without nitrates. After the feeding period, the Extensor digitorum longus (EDL) muscle was evaluated ex vivo for contraction force and fatigue. To evaluate the possible pathological changes, the histology of EDL tissues was performed in control and KNO3-fed groups after 21 days. The histological analysis showed an absence of negative effects in EDL muscles. We also analyzed 15 biochemical blood parameters. After 21 days of KNO3 supplementation, the EDL mass was, on average, 13% larger in the experimental group compared to the controls (p < 0.05). The muscle-specific force increased by 38% in comparison with the control group (p < 0.05). The results indicate that KNO3 has effects in an experimental mouse model, showing nitrate-diet-induced muscle strength. This study contributes to a better understanding of the molecular changes in muscles following nutritional intervention and may help develop strategies and products designated to treat muscle-related issues.

Continuous and simultaneous conversion of phosphogypsum waste to sodium sulfate and potassium sulfate using quaternary phase diagram

In this present work, the transformation of the Moroccan phosphogypsum (PG) waste, considered a potential source of sulfate, into potassium sulfate compound could help reduce environmental impact and create a new value chain for the phosphate industry. Generally, solid-liquid equilibria are frequently applied in chemical industries. They are a valuable aid in visualizing the precipitation, separation, and purification of a solid phase and the pathways by which crystallization can occur. This process aims to produce potassium sulfate (K₂SO₄), a high-value fertilizer, from sulfate solutions obtained after dissolving PG in a NaOH medium. The quaternary phase diagram Na⁺, K⁺//Cl^-, SO₄^2--H₂O at 25 °C was especially used to determine the operating conditions and the design of a crystallization process during the PG conversion into K₂SO₄. The Jänecke representation of this system enables the determination of the optimal trajectory in the phase diagram for the double decomposition reaction. X-ray fluorescent (XRF) and X-ray diffraction (XRD) techniques were conducted to identify the crystalline phases formed during our process. In summary, the results of this study could contribute to the development of a sustainable valorization PG. Furthermore, K₂SO₄ represents a good alternative to potassium chloride for chloride-sensitive crops.

Spatial distribution of fecal pollution indicators in sewage sludge flocs and their removal and inactivation as revealed by qPCR/viability-qPCR during potassium ferrate treatment

Sludge reuse and utilization is one of important routines of disseminating fecal pollution to surface water and groundwater. However, it remains unclear the spatial distribution of fecal pollution indicators in sludge flocs and their reductions during sludge treatment processes. In this study, the abundances of fecal pollution indicators including cross-assembly phage (crAssphage), JC and BK polyomavirus (JCPyV, BKPyV), human adenovirus (HAdV), the human-specific HF183 Bacteroides (HF183) and Escherichia coli (EC) in soluble extracellular polymeric substances (S-EPS), loosely-bound EPS (LB-EPS), tightly-bound EPS (TB-EPS), and pellets of sludge flocs were determined, and the effect of potassium ferrate (PF) treatment on their removal and inactivation was investigated by using both qPCR and viability-qPCR. Results showed that all investigated indicators were detected in each fraction of sludge flocs. The PF treatment led to a great migration of indicators from sludge pellets to sludge EPS and some extent of their inactivation in each fraction of sludge flocs. The overall reductions of human fecal indicators in sludge determined by qPCR were 0-1.30 logs, which were 0-2 orders of magnitude lower than those of 0.69-2.39 logs detected by viability-qPCR, implying their inactivation by PF treatment to potentially alleviate the associated human health risks.

Ultrahigh sorption of sulfamethoxazole by potassium hydroxide-modified biochars derived from bean-worm skin waste

Food processing of bean worm generates copious amount of skin as solid waste posing a serious environmental concern. The present study utilized bean worm skin (BWS) waste to produce KOH-modified biochars (KBWS-BCs) for the removal of sulfamethoxazole (SMX) from aqueous solution for the first time. Characterization of KBWS-BCs was systematically investigated via multiple instrumental analysis techniques. The sorption performance of KBWS-BCs as a function of solution pH, reaction time, initial SMX concentration, and reaction temperature was investigated using batch experiments. The classic kinetics and isotherm models were employed to fit the sorption data. KBWS-BCs exhibited large surface areas (3331-4742 m² g^-1) and ultrahigh sorption performance for SMX (maximum adsorption capacities of 909-2000 mg g^-1), which were comparable to those of other modified biochars and even those of well-designed materials. Thermodynamic study indicated that the sorption of SMX on KBWS-BCs was a spontaneous (△G° < 0) and exothermic (△H° < 0) process. Mechanism analysis showed that both chemisorption and physisorption were responsible for the adsorption of SMX by KBWS-BCs. Overall, recycling BWS for preparation of high-performance biochars can be a "win-win" strategy for both disposal of BWS and removal of SMX from wastewater.

Combined effects of hydrothermally-altered feldspar and water regime on cadmium minimization in rice

The accumulation of cadmium (Cd) in grains and edible parts of crops poses a risk to human health. Because rice is the staple food of more than half of the world population, reducing Cd uptake by rice is critical for food safety. HydroPotash (HYP), an innovative potassium fertilizer produced with a hydrothermal process, has the characteristics of immobilizing heavy metals and potential use for remediating Cd-contaminated soils. The objective of this study was to evaluate the HYP as a soil amendment to immobilize Cd in acidic soils and to reduce the accumulation of Cd in rice tissues. The experiment was performed in a greenhouse with a Cecil sandy loam soil (pH 5.3 and spiked with 3 mg Cd kg^-1) under either flooding conditions (water level at 4 cm above the soil surface) or at field capacity. Two hydrothermal materials (HYP-1 and HYP-2) were compared with K-feldspar + Ca(OH)₂ (the raw material used for producing HYP), Ca(OH)₂, zeolite, and a control (without amendment). After 30 days of soil incubation, HydroPotashs, the raw material, and Ca(OH)₂ increased both soil solution pH and electrical conductivity. These materials also decreased soluble Cd concentration (up to 99.7%) compared with the control (p < 0.05). After 145 days, regardless of the materials applied, plant growth was favored (up to 35.8%) under the flooded regime. HydroPotash-1 was more effective for increasing dry biomass compared with other amendments under both water regimes. HydroPotashs reduced extractable Cd in soil, Cd content in plant biomass at tillering and maturing stage, and were efficient in minimizing Cd accumulation in rice grains.

Improved Dewaterability of Waste Activated Sludge by Fe(II)-Activated Potassium Periodate Oxidation

Fe(II)-activated potassium periodate (KIO₄) oxidation was used to improve the dewaterability of waste-activated sludge for the first time. Compared with those of raw sludge, the capillary suction time (CST), specific resistance filtration (SRF), and water content of filter cake (W_C) of sludge treated using the Fe(II)/KIO₄ process under the optimal conditions (i.e., the initial pH = 6.8, KIO₄ dose = 1.4 mmol/g volatile suspended solids, Fe(II)/KIO₄ molar ratio = 1.2) decreased by 64.34%, 84.13%, and 6.69%, respectively. For conditioned sludge flocs, the Zeta potential and particle size were increased, and hydrophilic proteins in extracellular polymeric substances (EPS) were partly degraded, accompanied by the transformation of tightly bound EPS into soluble EPS and the conversion of dense sludge flocs into loose and porous ones. During Fe(II)/KIO₄ oxidation, Fe(IV) and the accompanying ^•OH were determined as the predominant reactive species and the underlying mechanism of sludge EPS degradation was proposed. This work provides a prospective method for conditioning the sludge dewaterability.

Preparation of magnesium potassium phosphate cement using by-product MgO from Qarhan Salt Lake for low-carbon and sustainable cement production

Herein, to reduce CO₂ emissions and energy consumption and to promote the recycling of waste resources, two types of boron-containing MgO by-products, which were obtained by lithium extraction from Qarhan Salt Lake, China, were used as substitutes for dead-burned MgO to prepare magnesium phosphate potassium cement (MKPC) as a rapid repair material. First, the phase composition and particle-size distribution of the MgO by-product were investigated. The effects of different MgO sources, molar ratio of MgO to KH₂PO₄ (M/P), and curing age on the setting time and mechanical properties of MKPC were then studied. Based on the results, the mix proportion of MKPC was optimized. Finally, X-ray diffractometry, scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS), differential thermogravimetric (DTG) analysis, and mercury intrusion porosimetry were used to characterize the phase and microstructure evolution of MKPC prepared with different MgO contents. The results demonstrated that the by-product MgO prolonged the setting time of MKPC to more than 40 min. In addition, in the initial stage of hydration, the compressive strength of the MgO by-product was slightly lower than that of the dead-burned MgO; however, with increasing age, the mechanical properties of MKPC prepared by by-product MgO were excellent (up to 60 MPa). The phase and microstructure results revealed that the main hydration product of MKPC prepared using the three types of MgO was MgKPO₄·6H₂O. Combined with the physical and chemical properties of the raw materials, it was confirmed that the larger particle size and the coexisting impurities from the salt lake were the main reasons for the longer setting time of the MKPC prepared by the by-product MgO. We believe that this research will be of great significance for the preparation of low-carbon, low-cost, and high-performance MKPC materials.

Exploring the role of potassium ferrate and straw fiber in enhancing the strength of cement-based solidified municipal sludge

The effect of potassium ferrate (PF) and straw fiber (SF) on the strength of cement-based solidified municipal sludge, including the influence of reducing the organic matter in the sludge on the efficiency of the hydration of the cement, was studied. Single-factor tests, orthogonal tests, and linear weighted optimization methods were used to obtain suitable ratios to meet practical requirements, and then SEM and XRD analyses were used to explore the solidification mechanism. The results showed that PF and SF had significant influence on the strength, with SF having the greatest influence and the strength increasing with the amount of both admixtures, and cement had no significant influence on the strength. After linear weighting optimization, the ideal dosage was found to be 20% cement, 20% PF, and 5% SF, which produced a solidified sludge that had an strength of 126.87 kPa, far higher than the 50 kPa required to qualify for disposal in landfills. Analysis of the mineral content and microstructure showed that PF and SF could promote cement hydration and produce more hydration products, and the density of the optimized sample was much higher than that of the raw sludge and a sludge sample mixed with 20% cement alone.

Effects of potassium persulfate on nitrogen loss and microbial community during cow manure and corn straw composting

Strong oxidants can reduce the emission of NH₃ during composting. But as a commonly used oxidant, the influence of persulfate on nitrogen transformation during composting is unclear. In this study, the effects of 0.3 %-1.2 % potassium persulfate (PS) on nitrogen losses and microbial community during air-dried cow manure composting were investigated. The results showed that PS could reduce nitrogen losses compared to the control. This was because it decreased pH and the maximum NH₄⁺-N content of treatments, which was beneficial to nitrogen retention. In addition, Pseudoxanthomonas and Chelativorans were enriched compared to the control, which might be associated with NH₄⁺-N transformation and nitrogen fixation. Meanwhile, PS increased the abundance of thermophilic lignocellulose degrading bacteria, and 0.3 % and 0.6 % PS increased the maximum temperature and the duration of the thermophilic period. This study indicated that PS could reduce nitrogen losses in composting and greatly influence nitrogen transforming and lignocellulose degrading bacteria.

Mechanistic understanding of Curium(III) sorption on natural K-feldspar surfaces

To assess a reliable safety case for future deep underground repositories for highly active nuclear waste the retention of radionuclides by the surrounding host rock must be understood comprehensively. Retention is influenced by several parameters such as mineral heterogeneity and surface roughness, as well as pore water chemistry (e.g., pH). However, the interplay between those parameters is not yet well understood. Therefore, we present a correlative spectromicroscopic approach to investigate sorption of the actinide Cm(III) on: 1) bulk K-feldspar crystals to determine the effect of surface roughness and pH (5.5 and 6.9) and 2) a large feldspar grain as part of a complex crystalline rock system to observe how sorption is influenced by the surrounding heterogeneous mineralogy. Our findings show that rougher K-feldspar surfaces exhibit increased Cm(III) uptake and stronger complexation. Similarly, increasing pH leads to higher surface loading and stronger Cm(III) binding to the surface. Within a heterogeneous mineralogical system sorption is further affected by neighboring mineral dissolution and competitive sorption between mineral phases such as mica and feldspar. The obtained results express a need for investigating relevant processes on multiple scales of dimension and complexity to better understand trivalent radionuclide retention by a potential repository host rock.

Potassium ferrate pretreatment promotes short chain fatty acids yield and antibiotics reduction in acidogenic fermentation of sewage sludge

During the acidogenic fermentation converting waste activated sludge (WAS) into short-chain fatty acids (SCFA), hydrolysis of complex organic polymers is a limiting step and the transformation of harmful substances (such as antibiotics) during acidogenic fermentation is unknown. In this study, potassium ferrate (K₂FeO₄) oxidation was used as a pretreatment strategy for WAS acidogenic fermentation to increase the hydrolysis of sludge and destruct the harmful antibiotics. Pretreatment with K₂FeO₄ can effectively increase the SCFA production during acidogenic fermentation and change the distribution of SCFA components. With the dosage of 0.2 g/g TS, the maximum SCFA yield was 4823 mg COD/L, which is 28.3 times that of the control group; acetic acid accounts for more than 90% of the total SCFA. The higher dosage (0.5 g/g TS) can further increase the proportion of acetic acid, but inhibit the overall performance of SCFA production. Apart from the promotion of hydrolysis and acidogenesis, K₂FeO₄ pretreatment can also simultaneously oxidizes and degrades part of the antibiotics in the sludge. When the dosage is 0.5 g/g TS, the degradation efficacy of antibiotics is the most significant, and the contents of ofloxacin, azithromycin, and tetracycline in the sludge are reduced by 69%, 42%, and 50%, respectively. In addition, K₂FeO₄ pretreatment can also promote the release of antibiotics from sludge flocs, which is conducive to the simultaneous degradation of antibiotics in the subsequent biological treatment process.

pH regulated potassium ferrate oxidation promotes acetic acid yield and phosphorous recovery rate from waste activated sludge

To improve the dose efficiency of K₂FeO₄ in waste activated sludge (WAS) treatment, pH regulation on K₂FeO₄ pretreatment and acidogenic fermentation was investigated. Four pretreatments were compared, i.e. pH3 + 50 g/kg-TS, pH10 + 50 g/kg-TS, neutral pH + 50 g/kg-TS and neutral pH + 100 g/kg-TS (without pH adjustment). The higher short chain fatty acids (SCFAs) yield and phosphorous dissolution rate was found under the condition of pH 10.0. In pH10 + 50 g/kg-TS, the maximum concentration of SCFAs was 5591 mg-COD/L, which yield was 22.6 times higher than that of the neutral pH + 50 g/kg-TS (237 mg COD/L). The acidogenic fermentation period could be shortened to 5 days and acetic acid accounted for 70 % of SCFAs. Furthermore, PO₄^3--P in the hydrolysate (346.5 mg/L) accounted for 47.59 % of TP, which is easier to be recovered by chemical precipitation. Therefore, a more economical and feasible utilization mode of potassium ferrate was proposed.

Potassium perchlorate effects on primordial germ cells of developing medaka larvae

Perchlorate is a chemical compound commonly used in military artillery and equipment. It has been detected in drinking water, air, soil, and breast milk. Exposure of humans to perchlorate can occur in the theater of war and areas adjacent to military training grounds. A high concentration of perchlorate has been found to affect reproduction in vertebrates, including fish. However, whether environmental concentrations of perchlorate can affect primordial germ cells (PGCs), the founders of sperm and eggs, is not clearly understood. In the present study, we examined the effects of 0, 10, 100, and 1000 μg/L potassium perchlorate exposure on the embryonic development of medaka and their PGCs. Perchlorate exposure delayed hatching time, reduced heartbeat, inhibited migration of PGCs, and increased developmental deformities in the larvae. The 10 and 20 mg/L concentrations of perchlorate were lethal to embryos, whereas vitamin C co-treatment (1 mg/L) completely blocked perchlorate-induced mortality. RNA-seq analysis of isolated PGCs showed a non-linear pattern in expression profiles of differentially altered genes. Significantly upregulated genes were found in PGCs from the 10 and 1000 μg/L groups, whereas the 100 μg/L groups showed the highest number of significantly downregulated genes. Gene ontology analysis predicted differentially expressed genes to be involved in proteolysis, metabolic processes, peptides activity, hydrolase activity, and hormone activity. Among the cellular components, extracellular, intracellular, sarcoplasmic, and 6-phosphofructokinase and membrane-bounded processes were affected. Ingenuity Pathway Analysis of PGC transcriptomes revealed thyroid hormone signaling to be affected by all concentrations of perchlorate. The present results suggested that perchlorate affected the development of medaka larvae and vitamin C was able to ameliorate perchlorate-induced embryo mortality. Additionally, perchlorate altered the global transcriptional network in PGCs in a non-linear fashion suggesting its potential effects on developing germ cells and fertility.

Aerial and Collimated Sensor Radiological Mapping Following Dispersal of Activated Potassium Bromide

The exposure rate distribution was quantified over a site of three activated potassium bromide radiological dispersal device detonations at the Idaho National Laboratory Radiological Response Training Range with unmanned aerial vehicle (UAV) and ground-based methods. Discussions on the methods' survey characteristics, such as survey time, data spatial resolution, and area coverage, serve to inform those concerned with radiological response and cleanup efforts. Raster scans over the site at 4 m s-1 with 6 m between passes at an altitude of 4 m above ground level were executed with a 2.54 cm × 2.54 cm × 7.62 cm cesium iodide, sodium-doped [CsI(Na)] sensor mounted to a UAV. Exposure rates were calculated from the spectra obtained by the CsI(Na) using a flux unfolding method. Data obtained from the UAV raster were interpolated to produce a continuous exposure rate map across the site. The activity on the ground, inferred from collimated, ground-based sensor (Nomad) measurements in previous work, was used to calculate exposure rate distributions at the same altitude as the UAV-mounted CsI(Na) sensor. Agreement between Nomad and UAV exposure rate distributions is observed at rates up to 1.0 mR h-1 after corrections for ground effects were implemented on the Nomad data. Discrepancies in exposure rate contours are present at higher rates, directly above the detonation locations. In areas of high exposure rate gradients, it is anticipated that a faster UAV-mounted sensor and more refined scans by the UAV will improve characterization of the distribution.