Translating New Imaging Technologies to Clinical Practice

Radiology continues to benefit from constant innovation and technological advances. However, for promising new imaging technologies to reach widespread clinical practice, several milestones must be met. These include regulatory approval, early clinical evaluation, payer reimbursement, and broader marketplace adoption. Successful implementation of new imaging tests into clinical practice requires active stakeholder engagement and a focus on demonstrating clinical value during each phase of translation.

Medical malpractice regulation. Civil, administrative, and criminal liability

The evolution of the modern Romanian society reveals an increasing trend as to the liability for medical malpractice, which in correlation with recent amendments of relevant legislation should make healthcare professionals increase their awareness in this matter. In the analysis below, malpractice was defined from a theoretical and practical perspective, and approached from its potential consequences. As liability for malpractice could be variable subject to the nature and importance of the damages incurred, the analysis herein describes the civil, administrative, and criminal liability in general, as well as the main causes for the occurrence of malpractice (e.g. professional errors, lack of information and consent of the patients, reuse of single-use medical devices, etc.). Furthermore, a few recommendations have been further provided in order to eliminate or diminish malpractice from the healthcare professionals and medical institutions day-to-day activity.

Risks of Using Sterilization by Gamma Radiation: The Other Side of the Coin

The standard sterilization method for most medical devices over the past 40 years involves gamma irradiation. During sterilization, gamma rays efficiently eliminate microorganisms from the medical devices and tissue allografts, but also significantly change molecular structure of irradiated products, particularly fragile biologics such as cytokines, chemokines and growth factors. Accordingly, gamma radiation significantly alters biomechanical properties of bone, tendon, tracheal, skin, amnion tissue grafts and micronized amniotic membrane injectable products. Similarly, when polymer medical devices are sterilized by gamma radiation, their physico-chemical characteristics undergo modification significantly affecting their clinical use. Several animal studies demonstrated that consummation of irradiated food provoked genome instability raising serious concerns regarding oncogenic potential of irradiated consumables. These findings strongly suggest that new, long-term, prospective clinical studies should be conducted in near future to investigate whether irradiated food is safe for human consumption. In this review, we summarized current knowledge regarding molecular mechanisms responsible for deleterious effects of gamma radiation with focusing on its significance for food safety and biomechanical characteristics of medical devices, and tissue allografts, especially injectable biologics.

Clinical efficacy and effectiveness of 3D printing: a systematic review

OBJECTIVE

To evaluate the clinical efficacy and effectiveness of using 3D printing to develop medical devices across all medical fields.

DESIGN

Systematic review compliant with Preferred Reporting Items for Systematic Reviews and Meta-Analyses.

DATA SOURCES

PubMed, Web of Science, OVID, IEEE Xplore and Google Scholar.

METHODS

A double-blinded review method was used to select all abstracts up to January 2017 that reported on clinical trials of a three-dimensional (3D)-printed medical device. The studies were ranked according to their level of evidence, divided into medical fields based on the International Classification of Diseases chapter divisions and categorised into whether they were used for preoperative planning, aiding surgery or therapy. The Downs and Black Quality Index critical appraisal tool was used to assess the quality of reporting, external validity, risk of bias, risk of confounding and power of each study.

RESULTS

Of the 3084 abstracts screened, 350 studies met the inclusion criteria. Oral and maxillofacial surgery contained 58.3% of studies, and 23.7% covered the musculoskeletal system. Only 21 studies were randomised controlled trials (RCTs), and all fitted within these two fields. The majority of RCTs were 3D-printed anatomical models for preoperative planning and guides for aiding surgery. The main benefits of these devices were decreased surgical operation times and increased surgical accuracy.

CONCLUSIONS

All medical fields that assessed 3D-printed devices concluded that they were clinically effective. The fields that most rigorously assessed 3D-printed devices were oral and maxillofacial surgery and the musculoskeletal system, both of which concluded that the 3D-printed devices outperformed their conventional comparators. However, the efficacy and effectiveness of 3D-printed devices remain undetermined for the majority of medical fields. 3D-printed devices can play an important role in healthcare, but more rigorous and long-term assessments are needed to determine if 3D-printed devices are clinically relevant before they become part of standard clinical practice.

Human cadavers to evaluate prototypes of minimally invasive surgical instruments: A feasibility study

BACKGROUND

New technology should be extensively tested before it is tried on patients. Unfortunately representative models are lacking. In theory, fresh frozen human cadavers are excellent models.

OBJECTIVE

To identify strengths and weaknesses of fresh frozen human cadavers as research models for new technology prior to implementation in gynecological surgery.

METHODS

During pre-clinical validation studies regarding the MobiSep uterine manipulator, test procedures were performed on fresh frozen cadavers. Both the experimental setup as the performance of the prototype were assessed.

RESULTS

Five tests including six human cadavers were performed. Major changes were made to the MobiSep prototype design. The cadavers of two tests closely resembled surgical experiences as found in live patients. The anatomy of 4 of the 6 cadavers was not fully representative due to atrophy of the internal genitalia caused by age and due to the presence of pathology such extensive tumorous tissue.

CONCLUSION

The cadaver tests provided vital information regarding design and functionality, that failed to emerge during the in-vitro testing. However, experiments are subject to anatomical uncertainties or restrictions. Consequently, the suitability of a cadaver should be carefully assessed before it is used for testing new technology.

Scientific Evidence in Health Technology Assessment Reports: An In-Depth Analysis of European Assessments on High-Risk Medical Devices

BACKGROUND

The aim of this study was to examine the scientific evidence on clinical effectiveness and safety used in health technology assessments (HTAs) of high-risk medical devices (MDs) in Europe.

METHODS

We applied a systematic approach to identify European institutions involved in HTA and to select reports assessing MDs considered high-risk according to the definition in the new German health care regulation §137h. Reports published between 2010 and 2015 were considered in our subsequent analysis. We used a structured tool based on widely accepted methodologic principles from Drummond's framework to extract key information on the clinical evidence considered in the reports.

RESULTS

Out of 1376 identified reports, 93 were eligible for analysis. All reports based their assessment primarily on direct evidence, in most cases (68%) identified through an independent systematic literature search. In more than half the identified studies considered in the reports, clinical evidence for demonstration of effectiveness and safety was of moderate or low quality. Even when systematic reviews and randomized controlled trials were available for assessment, most studies showed an unclear or high risk of bias.

CONCLUSIONS

This study confirms that the quality of scientific evidence used in HTA of high-risk MDs is low and therefore the use of evidence needs improvement. The European Commission recently updated the regulation on MDs but mainly focused on the safety of materials and the CE (Conformité Européene [European Conformity]) mark. Our results show that additional changes are necessary, specifically with regard to the marketing authorization process of MDs, with stricter quality requirements based on methodologically robust trials, possibly in combination with other evidence sources.

Through-needle all-optical ultrasound imaging in vivo: a preclinical swine study

High-frequency ultrasound imaging can provide exquisite visualizations of tissue to guide minimally invasive procedures. Here, we demonstrate that an all-optical ultrasound transducer, through which light guided by optical fibers is used to generate and receive ultrasound, is suitable for real-time invasive medical imaging in vivo. Broad-bandwidth ultrasound generation was achieved through the photoacoustic excitation of a multiwalled carbon nanotube-polydimethylsiloxane composite coating on the distal end of a 300-μm multi-mode optical fiber by a pulsed laser. The interrogation of a high-finesse Fabry-Pérot cavity on a single-mode optical fiber by a wavelength-tunable continuous-wave laser was applied for ultrasound reception. This transducer was integrated within a custom inner transseptal needle (diameter 1.08 mm; length 78 cm) that included a metallic septum to acoustically isolate the two optical fibers. The use of this needle within the beating heart of a pig provided unprecedented real-time views (50 Hz scan rate) of cardiac tissue (depth: 2.5 cm; axial resolution: 64 μm) and revealed the critical anatomical structures required to safely perform a transseptal crossing: the right and left atrial walls, the right atrial appendage, and the limbus fossae ovalis. This new paradigm will allow ultrasound imaging to be integrated into a broad range of minimally invasive devices in different clinical contexts.

Incidence and costs of cardiac device infections: retrospective analysis using German health claims data

AIM

Estimate incidence and costs of cardiac device infections (CDIs) in Germany.

MATERIALS & METHODS

Patients had an implantable cardioverter defibrillator implanted over 2010-2013 and were followed to December 2014 using German health insurance claims data. A case-controlled analysis was performed using propensity score matching methods.

RESULTS

Risk of CDI 12 months post-implant was 3.4% overall, either 2.9% for de novo procedures versus 4.4% for replacement procedures. Mean 3-year incremental expenditure per patient for patients with CDI compared with controls was €31,493 for de novo implant patients and €33,777 for replacement patients. Mean incremental expenditure was €59,419 per patient with a major infection.

CONCLUSION

CDIs are highly expensive to manage, reinforcing the need for strategies to reduce their occurrence.

[Tools for assisting diagnosis]

Connected objects are revolutionising practices, fulfil patients' needs for autonomy and the need to deploy healthcare provision beyond healthcare facilities. This article illustrates how these tools can be used in the case of epilepsy.

Surface micropattern reduces colonization and medical device-associated infections

PURPOSE

Surface microtopography offers a promising approach for infection control. The goal of this study was to provide evidence that micropatterned surfaces significantly reduce the potential risk of medical device-associated infections.

METHODOLOGY

Micropatterned and smooth surfaces were challenged in vitro against the colonization and transference of two representative bacterial pathogens - Staphylococcus aureus and Pseudomonas aeruginosa. A percutaneous rat model was used to assess the effectiveness of the micropattern against device-associated S. aureus infections. After the percutaneous insertion of silicone rods into (healthy or immunocompromised) rats, their backs were inoculated with S. aureus. The bacterial burdens were determined in tissues under the rods and in the spleens.

RESULTS

The micropatterns reduced adherence by S. aureus (92.3 and 90.5 % reduction for flat and cylindrical surfaces, respectively), while P. aeruginosa colonization was limited by 99.9 % (flat) and 95.5 % (cylindrical). The micropatterned surfaces restricted transference by 95.1 % for S. aureus and 94.9 % for P. aeruginosa, compared to smooth surfaces. Rats with micropatterned devices had substantially fewer S. aureus in subcutaneous tissues (91 %) and spleens (88 %) compared to those with smooth ones. In a follow-up study, immunocompromised rats with micropatterned devices had significantly lower bacterial burdens on devices (99.5 and 99.9 % reduction on external and internal segments, respectively), as well as in subcutaneous tissues (97.8 %) and spleens (90.7 %) compared to those with smooth devices.

CONCLUSION

Micropatterned surfaces exhibited significantly reduced colonization and transference in vitro, as well as lower bacterial burdens in animal models. These results indicate that introducing this micropattern onto surfaces has high potential to reduce medical device-associated infections.

[Discussion on the Existing Problems and Countermeasures of Medical Devices (Ⅱ) Clinical Trial]

To provide reference for further improve the level of medical devices clinical trial, to ensure the medical devices quality combing with the problems found in the medical devices clinical trial in Shandong province, the problems and countermeasures of medical devices (Ⅱ) clinical trial were explored. Four countermeasures were put forward to solve the problems of medical devices (Ⅱ) clinical trial from different angles including sponsors, clinical trials institutions and the important part of clinical trials:raising the threshold of entry, consummating relevant laws and regulations, establishing quality management system, strengthening personnel training, attaching great importance to CRA and CRC.

[Analysis of Similarities and Differences between Guidance of Magnetic Resonance Diagnostic Devices Clinical Evaluation and Guidance of Medical Device Clinical Evaluation]

Clinical evaluation of medical devices plays an important role in the life cycle of medical devices. This paper introduces guidance of magnetic resonance diagnostic devices clinical evaluation and guidance of medical device clinical evaluation issued by CFDA. Their similarities and differences of the framework and content are analyzed, especially the definition, clinical evaluation methods and support data. By comparison, the clinical evaluation work of registration applicants can be more scientific and reasonable. At the same time, it can also be used for reference by the food and drug administration departments in evaluating the clinical evaluation of other products.

Use of Mechanical Insufflation-Exsufflation Devices for Airway Clearance in Subjects With Neuromuscular Disease

The aim of this systematic review is to examine the benefit/risk ratio of the use of mechanical insufflation-exsufflation (MI-E) devices for airway clearance in patients with neuromuscular diseases. A search was conducted for relevant studies in MEDLINE, the Cochrane Library, and the Health Technology Assessment Database using the main key words: cough, airway clearance, in-exsufflation. The search limits were studies published in English and French between 1970 and 2014 (literature watch until December 2015). The methodological quality of the studies was assessed using (1) the Cochrane Collaboration's risk of bias tool for randomized controlled trials and (2) the Institute of Health Economics' 20-item checklist for comparative and observational studies. Data were extracted into an evidence table according to (1) study design, (2) population characteristics (including age and type of diseases) and intervention (MI-E associated or not with other interventions), (3) outcome measures, and (4) key findings. Twelve studies met the inclusion criteria (4 randomized controlled trials, 3 comparative studies, and 5 observational studies). The quality of the selected studies was poor. None of the studies reported survival outcome. All studies evaluated change of pulmonary function parameters, such as peak expiratory flow. This review underlines the lack of robust data on mechanical medical devices used for airway clearance. The current scientific evidence does not support the use of MI-E for cough augmentation in patients with neuromuscular diseases, but health-care professionals are faced with the reality of medical practice and the absence of alternatives. Most European and American guidelines recommend the use of MI-E despite low-level evidence. However, even if performing comparative trials in a specific population is difficult, the medical device industry should provide reliable data to assist health-care professionals, providers, and payers in the decision-making process. This is the only way to ensure the best treatment for patients.

Proposed changes to the reimbursement of pharmaceuticals and medical devices in Poland and their impact on market access and the pharmaceutical industry

In Poland, two proposed amendments to the reimbursement act are currently in preparation; these are likely to substantially change the pricing and reimbursement landscape for both drugs and medical devices. Proposed changes include: alignment of medical device reimbursement with that of pharmaceuticals; relaxing the strict reimbursement criteria for ultra-orphan drugs; establishment of an additional funding category for vaccines; introduction of compassionate use, and a simplified reimbursement pathway for well-established off-label indications; appreciation of manufacturers' innovation and research and development efforts by creating a dedicated innovation budget; introduction of a mechanism preventing excessive parallel import; prolonged duration of reimbursement decisions and reimbursement lists; and increased flexibility in defining drug programmes. Both amendments are still at a draft stage and many aspects of the new regulations remain unclear. Nonetheless, the overall direction of some of the changes is already evident and warrants discussion due to their high expected impact on pharmaceutical and device manufacturers. Here we evaluate the main changes proposed to the reimbursement of drugs, vaccines, and medical devices, and examine the impact they are likely to have on market access and pharmaceutical industry in Poland.

Rewarming After Severe Accidental Hypothermia Using the Esophageal Heat Transfer Device: A Case Report

Patients with severe accidental hypothermia require active rewarming. External rewarming may not be successful in severe hypothermia, and use of invasive techniques is limited to regional centers and is associated with vascular access site and other complications. We present a patient with severe accidental hypothermia who was successfuly rewarmed using a novel esophageal heat transfer device. A 55-year-old male (175 cm, 71 kg) was admitted with the first recorded temperature 23.3°C. Rewarming using renal replacement therapy circuit was unsuccessful because of severe hypotension. We inserted the esophageal heat transfer device and rewarmed him successfully to target temperature 35-36°C. After rewarming, we maintained his body temperature in the range 35-36°C until accidental removal of the device. We observed no major adverse effects. To conclude, rewarming from severe accidental hypothermia was possible using the esophageal heat transfer device.

Biocompatibility assessment of cyclic olefin copolymers: Impact of two additives on cytotoxicity, oxidative stress, inflammatory reactions, and hemocompatibility

This work reports the biocompatibility evaluation of cyclic olefin copolymers (COC) as candidates for implantable medical devices. The focus was to establish the influence of two major additives (antioxidant and lubricant) on the overall biocompatibility. The cytotoxicity was evaluated according to ISO 10993-5 guidelines using L929 fibroblasts, HUVEC, and THP-1-derived macrophages. Oxidative stress (ROS, GSH/GSSG, and SOD analysis) and pro-inflammatory cytokines (Il-6 and TNF-α secretion) were quantified using THP-1 cells in direct contact with films. Hemocompatibility was assessed through haemolysis testing, dynamic blood coagulation, platelet adhesion, and activation (membranous P-selectin expression). Results show that the different types of COC have successfully passed the in vitro biocompatibility tests. The presence of antioxidant induces however a slight decrease in ROS production in correlation with a high SOD activity and a modification in blood coagulation profile probably linked to antioxidant recrystallization phenomenon on the surface of COC. The lubricant presence reduced haemolysis, fibrinogen adhesion, and platelet activation. Surface nanotopography of COC highlights different types of needles and globules according to the present additive. Those primary results indicate that COC are promising biomaterial. However, additives influenced some biological parameters pointing out the necessity of a global approach of risk analysis for biocompatibility evaluation. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 3333-3349, 2017.

How Satisfied Are Patients When Their Choice of Funded Glucose Meter Is Restricted to a Single Brand?

BACKGROUND

Many governments and insurers are driving down the cost of medical devices, including glucose meters, by the central management of purchasing decisions. We report patients' responses to an "enforced" change in brand of glucose meter, one year after the introduction of a national sole supplier arrangement for funded glucose meters and strips.

METHOD

Specialist diabetes clinic attendees from two geographical locations completed a questionnaire one year after the final meter changeover date. In the first location, consecutive patients were asked to complete a glucose meter satisfaction questionnaire during their clinic visit. In the second location, this questionnaire was mailed to clinic attendees. Responses to open questions were analyzed thematically.

RESULTS

Response rates were 85% and 31% from the first and second locations, respectively and 378 questionnaires were suitable for analysis, 309 from the first and 69 from the second location. Insulin users composed 90% of participants. Results from the two locations were broadly similar. Most participants adapted well to the changeover, however 36% reported ongoing dissatisfaction with their "new" meter. The commonest concern, expressed by 23% of participants, related to meter accuracy and precision.

CONCLUSIONS

One year after glucose meter changeover, a third of participants expressed dissatisfaction with their meter, with many participants describing a failure to adapt to the sole supplier arrangement. Providing a choice of meters and strips, ideally from two or more brands that have demonstrable differences in technical and ergonomic features, is likely to produce higher overall patient satisfaction than is a sole supplier arrangement.

Factors influencing the reporting of adverse medical device events: qualitative interviews with physicians about higher risk implantable devices

BACKGROUND

Postmarket surveillance of medical devices is reliant on physician reporting of adverse medical device events (AMDEs). Little is known about factors that influence whether and how physicians report AMDEs, an essential step in developing behaviour change interventions. This study explored factors that influence AMDE reporting.

METHODS

Qualitative interviews were conducted with physicians who differed by specialties that implant cardiovascular and orthopaedic devices prone to AMDEs, geography and years in practice. Participants were asked if and how they reported AMDEs, and the influencing factors. Themes were identified inductively using constant comparative technique, and reviewed and discussed by the research team on four occasions.

RESULTS

Twenty-two physicians of varying specialty, region, organisation and career stage perceived AMDE reporting as unnecessary, not possible or futile due to multiple factors. Physicians viewed AMDEs as an expected part of practice that they could manage by switching to different devices or developing work-around strategies for problematic devices. Physician beliefs and behaviour were reinforced by limited healthcare system capacity and industry responsiveness. The healthcare system lacked processes and infrastructure to detect, capture, share and act on information about AMDEs, and constrained device choice through purchasing contracts. The device industry did not respond to reports of AMDEs from physicians or improve their products based on such reports. As a result, participants said they used devices that were less than ideal for a given patient, leading to suboptimal patient outcomes.

CONCLUSIONS

There may be little point in solely educating or incentivising individual physicians to report AMDEs unless environmental conditions are conducive to doing so. Future research should explore policies that govern AMDEs and investigate how to design and implement postmarket surveillance systems.

[The Research on Reinspection Problems in Supervisory Sampling Inspection for Medical Devices]

Supervisory sampling inspection is one of the administrative supervision measures for medical devices. As the reinspection work affects the final conclusion of sampling inspection, inappropriate overturn during the reinspection has already impaired the impartiality and authority of the supervisory inspection work. By the statistics of survey materials, this article analyzes the reasons for requesting reinspection and making overturns, and proposes a scheme for eliminating the interference factors such as the understanding divergences and the defects of standards, the inspection capacity and the issues of sampled devices, etc. To enhance the authoritative of reinspection, this article also proposes principals of evasion, precedence, arbitration and assessment, and the improvement of the reinspection workflow in order to make the reinspection work more appropriate, more efficient and more impartial.

Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials

Recent advances in additive manufacturing (AM) techniques in terms of accuracy, reliability, the range of processable materials, and commercial availability have made them promising candidates for production of functional parts including those used in the biomedical industry. The complexity-for-free feature offered by AM means that very complex designs become feasible to manufacture, while batch-size-indifference enables fabrication of fully patient-specific medical devices. Design for AM (DfAM) approaches aim to fully utilize those features for development of medical devices with substantially enhanced performance and biomaterials with unprecedented combinations of favorable properties that originate from complex geometrical designs at the micro-scale. This paper reviews the most important approaches in DfAM particularly those applicable to additive bio-manufacturing including image-based design pipelines, parametric and non-parametric designs, metamaterials, rational and computationally enabled design, topology optimization, and bio-inspired design. Areas with limited research have been identified and suggestions have been made for future research. The paper concludes with a brief discussion on the practical aspects of DfAM and the potential of combining AM with subtractive and formative manufacturing processes in so-called hybrid manufacturing processes.

If You Build It, They Will Come: How to Establish an Academic Innovation Enterprise

The rapid growth of minimally invasive, image-guided intervention has redefined the procedural management of multiple disease entities. The process of innovation which has characterized the growth of interventional radiology can be best described as "needs-based," whereby practicing interventionalists identify unmet clinical needs and subsequently invent solutions to achieve desired technical and clinical outcomes. Historically, catheters and other percutaneous devices were developed with rudimentary manufacturing techniques and subsequently translated to patients with relatively little regulatory oversight. Since then, the resources required and financial costs of interventional technology development have grown exponentially. Fortunately, advances in software development, new methods of rapid prototyping, and commoditization of hardware components have made in-house engineering feasible once again. This has created an opportunity for academic medical centers to translate their research into testable prototypes in humans sooner and at reduced costs, and academic interventional radiology divisions are now leveraging these developments to create collaborative centers of innovation. This article describes five such organizational formats for collaboration and innovation in the academic setting, describing the structure, opportunities, requirements, and caveats of each model.

Cost effectiveness of medical devices to diagnose pre-eclampsia in low-resource settings

BACKGROUND

Maternal mortality remains a major health challenge facing developing countries, with pre-eclampsia accounting for up to 17 percent of maternal deaths. Diagnosis requires skilled health providers and devices that are appropriate for low-resource settings. This study presents the first cost-effectiveness analysis of multiple medical devices used to diagnose pre-eclampsia in low- and middle-income countries (LMICs).

METHODS

Blood pressure and proteinuria measurement devices, identified from compendia for LMICs, were included. We developed a decision tree framework to assess the cost-effectiveness of each device using parameter values that reflect the general standard of care based on a survey of relevant literature and expert opinion. We examined the sensitivity of our results using one-way and second-order probabilistic multivariate analyses.

RESULTS

Because the disability-adjusted life years (DALYs) averted for each device were very similar, the results were influenced by the per-use cost ranking. The most cost-effective device combination was a semi-automatic blood pressure measurement device and visually read urine strip test with the lowest combined per-use cost of $0.2004 and an incremental cost effectiveness ratio of $93.6 per DALY gained relative to a baseline with no access to diagnostic devices. When access to treatment is limited, it is more cost-effective to improve access to treatment than to increase testing rates or diagnostic device sensitivity.

CONCLUSIONS

Our findings were not sensitive to changes in device sensitivity, however they were sensitive to changes in the testing rate and treatment rate. Furthermore, our results suggest that simple devices are more cost-effective than complex devices. The results underscore the desirability of two design features for LMICs: ease of use and accuracy without calibration. Our findings have important implications for policy makers, health economists, health care providers and engineers.

Connecting the Brain to Itself through an Emulation

Pilot clinical trials of human patients implanted with devices that can chronically record and stimulate ensembles of hundreds to thousands of individual neurons offer the possibility of expanding the substrate of cognition. Parallel trains of firing rate activity can be delivered in real-time to an array of intermediate external modules that in turn can trigger parallel trains of stimulation back into the brain. These modules may be built in software, VLSI firmware, or biological tissue as in vitro culture preparations or in vivo ectopic construct organoids. Arrays of modules can be constructed as early stage whole brain emulators, following canonical intra- and inter-regional circuits. By using machine learning algorithms and classic tasks known to activate quasi-orthogonal functional connectivity patterns, bedside testing can rapidly identify ensemble tuning properties and in turn cycle through a sequence of external module architectures to explore which can causatively alter perception and behavior. Whole brain emulation both (1) serves to augment human neural function, compensating for disease and injury as an auxiliary parallel system, and (2) has its independent operation bootstrapped by a human-in-the-loop to identify optimal micro- and macro-architectures, update synaptic weights, and entrain behaviors. In this manner, closed-loop brain-computer interface pilot clinical trials can advance strong artificial intelligence development and forge new therapies to restore independence in children and adults with neurological conditions.

Prevention of Bacterial Colonization on Catheters by a One-Step Coating Process Involving an Antibiofouling Polymer in Water

As reports of multidrug resistant pathogens have increased, patients with implanted medical catheters increasingly need alternative solutions to antibiotic treatments. As most catheter-related infections are directly associated with biofilm formation on the catheter surface, which, once formed, is difficult to eliminate, a promising approach to biofilm prevention involves inhibiting the initial adhesion of bacteria to the surface. In this study, we report an amphiphilic, antifouling polymer, poly(DMA-mPEGMA-AA) that can facilely coat the surfaces of commercially available catheter materials in water and prevent bacterial adhesion to and subsequent colonization of the surface, giving rise to an antibiofilm surface. The antifouling coating layer was formed simply by dipping a model substrate (polystyrene, PET, PDMS, or silicon-based urinary catheter) in water containing poly(DMA-mPEGMA-AA), followed by characterization by X-ray photoelectron spectroscopy (XPS). The antibacterial adhesion properties of the polymer-coated surface were assessed for Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) growth under static (incubation in the presence of a bacterial suspension) and dynamic (bacteria suspended in a solution under flow) conditions. Regardless of the conditions, the polymer-coated surface displayed significantly reduced attachment of the bacteria (antiadhesion effect > ∼8-fold) compared to the bare noncoated substrates. Treatment of the implanted catheters with S. aureus in vivo further confirmed that the polymer-coated silicon urinary catheters could significantly reduce bacterial adhesion and biofilm formation in a bacterial infection animal model. Furthermore, the polymer-coated catheters did not induce hemolysis and were resistant to the adhesion of blood-circulating cells, indicative of high biocompatibility. Collectively, the present amphiphilic antifouling polymer is potentially useful as a coating platform that renders existing medical devices resistant to biofilm formation.

Utility of registries for post-marketing evaluation of medicines. A survey of Swedish health care quality registries from a regulatory perspective

AIM

The aim of this study was to describe content and procedures in some selected Swedish health care quality registries (QRs) of relevance to regulatory decision-making.

METHODS

A workshop was organized with participation of seven Swedish QRs which subsequently answered a questionnaire regarding registry content on drug treatments and outcomes. Patient populations, coverage, data handling and quality control, as well as legal and ethical aspects are presented. Scientific publications from the QRs are used as a complementary measure of quality and scientific relevance.

RESULTS

The registries under study collect clinical data of high relevance to regulatory and health technology agencies. Five out of seven registries provide information on the drug of interest. When applying external quality criteria, we found a high degree of fulfillment, although information on medication was not sufficient to answer all questions of regulatory interest. A notable strength is the option for linkage to the Prescribed Drug Registry and to information on education and socioeconomic status. Data on drugs used during hospitalization were also collected to some extent. Outcome measures collected resemble those used in relevant clinical trials. All registries collected patient-reported outcome measures. The number of publications from the registries was substantial, with studies of appropriate design, including randomized registry trials.

CONCLUSIONS

Quality registries may provide a valuable source of post-marketing data on drug effectiveness, safety, and cost-effectiveness. Closer collaboration between registries and regulators to improve quality and usefulness of registry data could benefit both regulatory utility and value for health care providers.