Influence of Fluorination on Single-Molecule Unfolding and Rupture Pathways of a Mechanostable Protein Adhesion Complex

We investigated the influence of fluorination on unfolding and unbinding reaction pathways of a mechanostable protein complex comprising the tandem dyad XModule-Dockerin bound to Cohesin. Using single-molecule atomic force spectroscopy, we mapped the energy landscapes governing the unfolding and unbinding reactions. We then used sense codon suppression to substitute trifluoroleucine in place of canonical leucine globally in XMod-Doc. Although TFL substitution thermally destabilized XMod-Doc, it had little effect on XMod-Doc:Coh binding affinity at equilibrium. When we mechanically dissociated global TFL-substituted XMod-Doc from Coh, we observed the emergence of a new unbinding pathway with a lower energy barrier. Counterintuitively, when fluorination was restricted to Doc, we observed mechano-stabilization of the non-fluorinated neighboring XMod domain. This suggests that intramolecular deformation is modulated by fluorination and highlights the differences between equilibrium thermostability and non-equilibrium mechanostability. Future work is poised to investigate fluorination as a means to modulate mechanical properties of synthetic proteins and hydrogels.

Single-molecule and in silico dissection of the interaction between Polycomb repressive complex 2 and chromatin

Polycomb repressive complex 2 (PRC2) installs and spreads repressive histone methylation marks on eukaryotic chromosomes. Because of the key roles that PRC2 plays in development and disease, how this epigenetic machinery interacts with DNA and nucleosomes is of major interest. Nonetheless, the mechanism by which PRC2 engages with native-like chromatin remains incompletely understood. In this work, we employ single-molecule force spectroscopy and molecular dynamics simulations to dissect the behavior of PRC2 on polynucleosome arrays. Our results reveal an unexpectedly diverse repertoire of PRC2 binding configurations on chromatin. Besides reproducing known binding modes in which PRC2 interacts with bare DNA, mononucleosomes, and adjacent nucleosome pairs, our data also provide direct evidence that PRC2 can bridge pairs of distal nucleosomes. In particular, the "1-3" bridging mode, in which PRC2 engages two nucleosomes separated by one spacer nucleosome, is a preferred low-energy configuration. Moreover, we show that the distribution and stability of different PRC2-chromatin interaction modes are modulated by accessory subunits, oncogenic histone mutations, and the methylation state of chromatin. Overall, these findings have implications for the mechanism by which PRC2 spreads histone modifications and compacts chromatin. The experimental and computational platforms developed here provide a framework for understanding the molecular basis of epigenetic maintenance mediated by Polycomb-group proteins.

Single-molecule studies of amyloid proteins: from biophysical properties to diagnostic perspectives

In neurodegenerative diseases, a wide range of amyloid proteins or peptides such as amyloid-beta and α-synuclein fail to keep native functional conformations, followed by misfolding and self-assembling into a diverse array of aggregates. The aggregates further exert toxicity leading to the dysfunction, degeneration and loss of cells in the affected organs. Due to the disordered structure of the amyloid proteins, endogenous molecules, such as lipids, are prone to interact with amyloid proteins at a low concentration and influence amyloid cytotoxicity. The heterogeneity of amyloid proteinscomplicates the understanding of the amyloid cytotoxicity when relying only on conventional bulk and ensemble techniques. As complementary tools, single-molecule techniques (SMTs) provide novel insights into the different subpopulations of a heterogeneous amyloid mixture as well as the cytotoxicity, in particular as involved in lipid membranes. This review focuses on the recent advances of a series of SMTs, including single-molecule fluorescence imaging, single-molecule force spectroscopy and single-nanopore electrical recording, for the understanding of the amyloid molecular mechanism. The working principles, benefits and limitations of each technique are discussed and compared in amyloid protein related studies.. We also discuss why SMTs show great potential and are worthy of further investigation with feasibility studies as diagnostic tools of neurodegenerative diseases and which limitations are to be addressed.

Mechanochemical Activation of Class-B G-Protein-Coupled Receptor upon Peptide-Ligand Binding

Glucagon binding to the class-B G-protein-coupled glucagon receptor (GCGR) triggers the release of glucose from the liver during fasting. Recently, GCGR crystal structures have highlighted the conformation and molecular details of inactive and active receptor states. However, the dynamics of the conformational changes accompanying GCGR activation remains unclear. Here, we use multiplex force-distance curve-based atomic force microscopy (FD-based AFM) to probe in situ glucagon binding to individual GCGRs and monitor dynamically the transition to the active conformer. After a "dock" step, in which glucagon is partially bound to the GCGR extracellular domain, further interactions of the N-terminus with the transmembrane domain trigger an increase in the stiffness of the complex, adopting a highly stable and rigid "lock" conformer. This mechanotransduction is key for G-protein recruitment.

Control of Ligand-Binding Specificity Using Photocleavable Linkers in AFM Force Spectroscopy

In recent decades, atomic force microscopy (AFM), in particular the force spectroscopy mode, has become a method of choice to study biomolecular interactions at the single-molecule level. However, grafting procedures as well as determining binding specificity remain challenging. We report here an innovative approach based on a photocleavable group that enables in situ release of the ligands bound to the AFM tip and thus allows direct assessment of the binding specificity. Applicable to a wide variety of molecules, the strategy presented here provides new opportunities to study specific interactions and deliver single molecules with high spatiotemporal resolution in a wide range of applications, including AFM-based cell biology.

Weak Fragment Crystallizable (Fc) Domain Interactions Drive the Dynamic Assembly of IgG Oligomers upon Antigen Recognition

Activation of membrane receptors through clustering is a common mechanism found in various biological systems. Spatial proximity of receptors may be transduced across the membrane to initiate signaling pathways or alternatively be recognized by peripheral proteins or immune cells to trigger external effector functions. Here we show how specific immunoglobulin G (IgG) binding induces clustering of monomeric target molecules in lipid membranes through Fc-Fc interactions. We visualize and characterize the dynamic IgG oligomerization process and the molecular interactions involved using high-speed atomic force microscopy, single-molecule force spectroscopy, and quartz crystal microbalance experiments. We found that the Fc-Fc interaction strength is precisely tuned to be weak enough to prevent IgG oligomerization in solution at physiological titers, but enabling IgG oligomerization when Fabs additionally bind to their cognate surface epitopes, a mechanism that ultimately targets IgG-mediated effector functions such as classical complement activation to antigenic membranes.

Metal-Organic Framework Preserves the Biorecognition of Antibodies on Nanoscale Surfaces Validated by Single-Molecule Force Spectroscopy

Antibody biorecognition forms the basis for numerous biomedical applications such as diagnostic assays, targeted drug delivery, and targeted cancer imaging. However, antibodies, especially after being conjugated to surfaces or nanostructures, suffer from stability issues when stored under nonrefrigeration conditions. Therefore, enhancing the stability of antibodies on surfaces and nanostructures under ambient and elevated temperatures is of paramount importance for many nanobiotechnology applications. In this study, we introduce a simple and facile approach based on a metal-organic framework (MOF) coating to preserve the biorecognition capability of antibodies immobilized on nanoscale surfaces after exposure to elevated temperatures for a prolonged period. By using atomic force microscopy (AFM)-based force spectroscopy, we demonstrate that the MOF coating is able to preserve the binding force and binding frequency of the anti-CD-146 antibody attached to an AFM tip to CD-146 antigen on the surface of melanoma cells at the single-molecule level. We also demonstrate that the MOF coating outperforms another commonly used sucrose coatings in terms of maintaining the binding force and binding frequency of the antibody to antigen. Herein, the AFM tip functionalized with antibodies provides a nanoscale testbed (analogous to an antibody-conjugated nanostructure) to assess antibody biorecognition at the single-molecule level and preservation efficacy under antibody denaturing conditions. This MOF coating approach should be applicable to the preservation of a variety of antibody-conjugated nanostructures aiming for targeted drug delivery, targeted cancer imaging, and nanobiosensors. The improved stability and elimination of refrigeration requirements will facilitate wide applications of antibody-enabled nanobiotechnology in resource-limited environments and populations.

A Synthetic Bioinspired Carbohydrate Polymer with Mucoadhesive Properties

Mucoadhesive polymers are of significant interest to the pharmaceutical, medical device, and cosmetic industries. Polysaccharides possessing charged functional groups, such as chitosan, are known for mucoadhesive properties but suffer from poor chemical definition and solubility, while the chemical synthesis of polysaccharides is challenging with few reported examples of synthetic carbohydrate polymers with engineered-in ionic functionality. We report the design, synthesis, and evaluation of a synthetic, cationic, enantiopure carbohydrate polymer inspired by the structure of chitosan. These water-soluble, cytocompatible polymers are prepared via an anionic ring-opening polymerization of a bicyclic β-lactam sugar monomer. The synthetic method provides control over the site of amine functionalization and the length of the polymer while providing narrow dispersities. These well-defined polymers are mucoadhesive as documented in single-molecule scale (AFM), bulk solution phase (FRAP), and ex vivo tissue experiments. Polymer length and functionality affects bioactivity as long, charged polymers display higher mucoadhesivity than long, neutral polymers or short, charged polymers.

Decoding Biomineralization: Interaction of a Mad10-Derived Peptide with Magnetite Thin Films

Protein-surface interactions play a pivotal role in processes as diverse as biomineralization, biofouling, and the cellular response to medical implants. In biomineralization processes, biomacromolecules control mineral deposition and architecture via complex and often unknown mechanisms. For studying these mechanisms, the formation of magnetite nanoparticles in magnetotactic bacteria has become an excellent model system. Most interestingly, nanoparticle morphologies have been discovered that defy crystallographic rules (e.g., in the species Desulfamplus magnetovallimortis strain BW-1). In certain conditions, this strain mineralizes bullet-shaped magnetite nanoparticles, which exhibit defined (111) crystal faces and are elongated along the [100] direction. We hypothesize that surface-specific protein interactions break the nanoparticle symmetry, inhibiting the growth of certain crystal faces and thereby favoring the growth of others. Screening the genome of BW-1, we identified Mad10 (Magnetosome-associated deep-branching) as a potential magnetite-binding protein. Using atomic force microscope (AFM)-based single-molecule force spectroscopy, we show that a Mad10-derived peptide, which represents the most conserved region of Mad10, binds strongly to (100)- and (111)-oriented single-crystalline magnetite thin films. The peptide-magnetite interaction is thus material- but not crystal-face-specific. It is characterized by broad rupture force distributions that do not depend on the retraction speed of the AFM cantilever. To account for these experimental findings, we introduce a three-state model that incorporates fast rebinding. The model suggests that the peptide-surface interaction is strong in the absence of load, which is a direct result of this fast rebinding process. Overall, our study sheds light on the kinetic nature of peptide-surface interactions and introduces a new magnetite-binding peptide with potential use as a functional coating for magnetite nanoparticles in biotechnological and biomedical applications.

Nanomechanical properties of steric zipper globular structures

The term amyloid defines a group of proteins that aggregate into plaques or fibers. Amyloid fibers gained their fame mostly due to their relation with neurodegenerative diseases in humans. However, secreted by lower organisms, such as bacteria and fungi, amyloid fibers play a functional role: for example, when they serve as cement in the extracellular matrix of biofilms. Originating either in humans or in microorganisms, the sequence of amyloid proteins is decorated with hexapeptides with high propensity to form fibers, known as steric zippers. We have found that steric zippers form globular structures on route to making fibers and exhibit a characteristic force-distance (F-D) fingerprint when pulled with an atomic force microscope (AFM) tip. Particularly, the F-D pulling curves showed force plateau steps, suggesting that the globular structures were composed of chains that were unwound like a yarn ball. Force plateau analysis showed that the F-D characteristic parameters were sequence sensitive, representing differences in the packing of the hexapeptides within the globules. These unprecedented findings show that steric zippers exhibit a characteristic nanomechanical signature in solution in addition to previously observed characteristic crystallographic structure. Getting to the fundamental interactions that govern the unzipping of full-length amyloid fibers may initiate the development of antiamyloid methods that target the physical in addition to the structural properties of steric zippers.

Free-Energy-Based Gene Mutation Detection Using LNA Probes

We have developed a label-free approach for direct detection of gene mutations using free-energy values that are derived from single-molecule force spectroscopy (SMFS)-based nucleic acid unbinding experiments. From the duplex unbinding force values acquired by SMFS, the force-loading-rate-independent Gibbs free-energy values were derived using Jarzinsky's equality treatment. Because it provides molecule-by-molecule information, this approach is a major shift compared to the earlier reports on label-free detection of DNA sequences, which are mostly based on ensemble level data. We tested our approach in the disease model framework of multiple drug-resistant tuberculosis using the nuclease-resistant and conformationally rigid locked nucleic acid probes that are a robust and efficient alternative to the DNA probes. All of the major mutations in Mycobacterium tuberculosis (MTB), as relevant to MTB's resistance to the first-line anti-TB drugs rifampicin and isoniazid, could be identified, and the wild type could be discriminated from the most prevalent mutation and the most prevalent mutation from the less occurring ones. Our approach could also identify DNA sequences (45 mer), having overhang stretches at different positions with respect to the complementary stretch. Probably for the first time, the findings show that free-energy-based detection of gene mutations is possible at molecular resolution.

Broken force dispersal network in tip-links by the mutations at the Ca2+-binding residues induces hearing-loss

Tip-link as force-sensor in hearing conveys the mechanical force originating from sound to ion-channels while maintaining the integrity of the entire sensory assembly in the inner ear. This delicate balance between structure and function of tip-links is regulated by Ca²⁺-ions present in endolymph. Mutations at the Ca²⁺-binding sites of tip-links often lead to congenital deafness, sometimes syndromic defects impairing vision along with hearing. Although such mutations are already identified, it is still not clear how the mutants alter the structure-function properties of the force-sensors associated with diseases. With an aim to decipher the differences in force-conveying properties of the force-sensors in molecular details, we identified the conformational variability of mutant and wild-type tip-links at the single-molecule level using FRET at the endolymphatic Ca²⁺ concentrations and subsequently measured the force-responsive behavior using single-molecule force spectroscopy with an Atomic Force Microscope (AFM). AFM allowed us to mimic the high and wide range of force ramps (10³-10⁶ pN s^-1) as experienced in the inner ear. We performed in silico network analysis to learn that alterations in the conformations of the mutants interrupt the natural force-propagation paths through the sensors and make the mutant tip-links vulnerable to input forces from sound stimuli. We also demonstrated that a Ca²⁺ rich environment can restore the force-response of the mutant tip-links which may eventually facilitate the designing of better therapeutic strategies to the hearing loss.

Removal of a Conserved Disulfide Bond Does Not Compromise Mechanical Stability of a VHH Antibody Complex

Single-domain VHH antibodies are promising reagents for medical therapy. A conserved disulfide bond within the VHH framework region is known to be critical for thermal stability, however, no prior studies have investigated its influence on the stability of VHH antibody-antigen complexes under mechanical load. Here, we used single-molecule force spectroscopy to test the influence of a VHH domain's conserved disulfide bond on the mechanical strength of the interaction with its antigen mCherry. We found that although removal of the disulfide bond through cysteine-to-alanine mutagenesis significantly lowered VHH domain denaturation temperature, it had no significant impact on the mechanical strength of the VHH:mCherry interaction with complex rupture occurring at ∼60 pN at 103-104 pN/sec regardless of disulfide bond state. These results demonstrate that mechanostable binding interactions can be built on molecular scaffolds that may be thermodynamically compromised at equilibrium.

Direction Matters: Monovalent Streptavidin/Biotin Complex under Load

Novel site-specific attachment strategies combined with improvements of computational resources enable new insights into the mechanics of the monovalent biotin/streptavidin complex under load and forced us to rethink the diversity of rupture forces reported in the literature. We discovered that the mechanical stability of this complex depends strongly on the geometry in which force is applied. By atomic force microscopy-based single molecule force spectroscopy we found unbinding of biotin to occur beyond 400 pN at force loading rates of 10 nN/s when monovalent streptavidin was tethered at its C-terminus. This value is about twice as high than that for N-terminal attachment. Steered molecular dynamics simulations provided a detailed picture of the mechanics of the unbinding process in the corresponding force loading geometries. Using machine learning techniques, we connected findings from hundreds of simulations to the experimental results, identifying different force propagation pathways. Interestingly, we observed that depending on force loading geometry, partial unfolding of N-terminal region of monovalent streptavidin occurs before biotin is released from the binding pocket.

Structural and mechanistic insights into mechanoactivation of focal adhesion kinase

Focal adhesion kinase (FAK) is a key signaling molecule regulating cell adhesion, migration, and survival. FAK localizes into focal adhesion complexes formed at the cytoplasmic side of cell attachment to the ECM and is activated after force generation via actomyosin fibers attached to this complex. The mechanism of translating mechanical force into a biochemical signal is not understood, and it is not clear whether FAK is activated directly by force or downstream to the force signal. We use experimental and computational single-molecule force spectroscopy to probe the mechanical properties of FAK and examine whether force can trigger activation by inducing conformational changes in FAK. By comparison with an open and active mutant of FAK, we are able to assign mechanoactivation to an initial rupture event in the low-force range. This activation event occurs before FAK unfolding at forces within the native range in focal adhesions. We are also able to assign all subsequent peaks in the force landscape to partial unfolding of FAK modules. We show that binding of ATP stabilizes the kinase domain, thereby altering the unfolding hierarchy. Using all-atom molecular dynamics simulations, we identify intermediates along the unfolding pathway, which provide buffering to allow extension of FAK in focal adhesions without compromising functionality. Our findings strongly support that forces in focal adhesions applied to FAK via known interactions can induce conformational changes, which in turn, trigger focal adhesion signaling.

Electrostatic Steering Enables Flow-Activated Von Willebrand Factor to Bind Platelet Glycoprotein, Revealed by Single-Molecule Stretching and Imaging

Von Willebrand factor (VWF), a large multimeric blood protein, senses changes in shear stress during bleeding and responds by binding platelets to plug ruptures in the vessel wall. Molecular mechanisms underlying this dynamic process are difficult to uncover using standard approaches due to the challenge of applying mechanical forces while monitoring structure and activity. By combining single-molecule fluorescence imaging with high-pressure, rapidly switching microfluidics, we reveal the key role of electrostatic steering in accelerating the binding between flow-activated VWF and GPIbα, and in rapidly immobilizing platelets under flow. We measure the elongation and tension-dependent activation of individual VWF multimers under a range of ionic strengths and pH levels, and find that the association rate is enhanced by 4 orders of magnitude by electrostatic steering. Under supraphysiologic salt concentrations, strong electrostatic screening dramatically decreases platelet binding to VWF in flow, revealing the critical role of electrostatic attraction in VWF-platelet binding during bleeding.

Direct Evidence for the Polymeric Nature of Polydopamine

Inspired by the adhesive proteins of mussels, polydopamine (pDA) has emerged as one of the most widely employed materials for surface functionalization. Despite numerous attempts at characterization, little consensus has emerged regarding whether pDA is a covalent polymer or a noncovalent aggregate of low molecular weight species. Here, we employed single-molecule force spectroscopy (SMFS) to characterize pDA films. Retraction of a pDA-coated cantilever from an oxide surface shows the characteristic features of a polymer with contour lengths of up to 200 nm. pDA polymers are generally weakly bound to the surface through much of their contour length, with occasional "sticky" points. Our findings represent the first direct evidence for the polymeric nature of pDA and provide a foundation upon which to better understand and tailor its physicochemical properties.

Distinct Binding Characteristics of Pathogenic Anti-Platelet Factor-4/Polyanion Antibodies to Antigens Coated on Different Substrates: A Perspective on Clinical Application

The polyanion heparin, which is frequently used in patients, complexes with the platelet-derived cationic chemokine platelet factor (PF4, CXCL4). This results in the formation of anti-PF4/heparin antibodies (anti-PF4/H Abs). Anti-PF4/H Abs are classified into three groups: (i) nonpathogenic Abs (group 1) with no clinical relevance; (ii) pathogenic heparin-dependent Abs (group 2), which activate platelets and can cause the severe adverse drug effect heparin-induced thrombocytopenia (HIT); and (iii) pathogenic autoimmune-HIT Abs (group 3), in which group 3 anti-PF4/H Abs causes a HIT-like autoimmune disease in the absence of heparin. Enzyme immunoassays using PF4/H complexes coated on the solid phase for detection of anti-PF4/H Abs cannot differentiate between pathogenic and nonpathogenic anti-PF4/H Abs. By single-molecule force spectroscopy, we identify a specific feature of pathogenic group 2 and group 3 Abs antibodies that (in contrast to nonpathogenic group 1 Abs) their binding forces to PF4/H complexes coated on platelets were significantly higher compared with those of PF4/H complexes immobilized on a solid phase. Only group 3 Abs showed high binding forces to platelets without the addition of PF4. In the presence of 50 μg/mL PF4, group 2 Abs also showed high binding forces to platelets. In contrast, binding forces of group 1 Abs always remained low (<100 pN). Our findings may have major relevance for the development of clinically applicable solid-phase assays, which allow differentiation of pathogenic platelet-activating from nonpathogenic anti-PF4/H Abs. Membrane-based expression of antigens might also increase the specificity of other assays for the detection of pathogenic (auto)-antibodies in clinical medicine.

Mechanobiology: protein refolding under force

The application of direct force to a protein enables to probe wide regions of its energy surface through conformational transitions as unfolding, extending, recoiling, collapsing, and refolding. While unfolding under force typically displayed a two-state behavior, refolding under force, from highly extended unfolded states, displayed a more complex behavior. The first recording of protein refolding at a force quench step displayed an initial rapid elastic recoil, followed by a plateau phase at some extension, concluding with a collapse to a final state, at which refolding occurred. These findings stirred a lively discussion, which led to further experimental and theoretical investigation of this behavior. It was demonstrated that the polymeric chain of the unfolded protein is required to fully collapse to a globular conformation for the maturation of native structure. This behavior was modeled using one-dimensional free energy landscape over the end-to-end length reaction coordinate, the collective measured variable. However, at low forces, conformational space is not well captured by such models, and using two-dimensional energy surfaces provides further insight into the dynamics of this process. This work reviews the main concepts of protein refolding under constant force, which is essential for understanding how mechanotransducing proteins operate in vivo.

A small single-domain protein folds through the same pathway on and off the ribosome

In vivo, proteins fold and function in a complex environment subject to many stresses that can modulate a protein's energy landscape. One aspect of the environment pertinent to protein folding is the ribosome, since proteins have the opportunity to fold while still bound to the ribosome during translation. We use a combination of force and chemical denaturant (chemomechanical unfolding), as well as point mutations, to characterize the folding mechanism of the src SH3 domain both as a stalled ribosome nascent chain and free in solution. Our results indicate that src SH3 folds through the same pathway on and off the ribosome. Molecular simulations also indicate that the ribosome does not affect the folding pathway for this small protein. Taken together, we conclude that the ribosome does not alter the folding mechanism of this small protein. These results, if general, suggest the ribosome may exert a bigger influence on the folding of multidomain proteins or protein domains that can partially fold before the entire domain sequence is outside the ribosome exit tunnel.

Molecular strategy for blocking isopeptide bond formation in nascent pilin proteins

Bacteria anchor to their host cells through their adhesive pili, which must resist the large mechanical stresses induced by the host as it attempts to dislodge the pathogens. The pili of gram-positive bacteria are constructed as a single polypeptide made of hundreds of pilin repeats, which contain intramolecular isopeptide bonds strategically located in the structure to prevent their unfolding under force, protecting the pilus from degradation by extant proteases and oxygen radicals. Here, we demonstrate the design of a short peptide that blocks the formation of the isopeptide bond present in the pilin Spy0128 from the human pathogen Streptococcus pyogenes, resulting in mechanically labile pilin domains. We use a combination of protein engineering and atomic-force microscopy force spectroscopy to demonstrate that the peptide blocks the formation of the native isopeptide bond and compromises the mechanics of the domain. While an intact Spy0128 is inextensible at any force, peptide-modified Spy0128 pilins readily unfold at very low forces, marking the abrogation of the intramolecular isopeptide bond as well as the absence of a stable pilin fold. We propose that isopeptide-blocking peptides could be further developed as a type of highly specific antiadhesive antibiotics to treat gram-positive pathogens.

Single-Molecule Force Spectroscopy of Transmembrane β-Barrel Proteins

Single-molecule force spectroscopy (SMFS) has been widely applied to study the mechanical unfolding and folding of transmembrane proteins. Here, we review the recent progress in characterizing bacterial and human transmembrane β-barrel proteins by SMFS. First, we describe the mechanical unfolding of transmembrane β-barrels, which follows a general mechanism dictated by the sequential unfolding and extraction of individual β-strands and β-hairpins from membranes. Upon force relaxation, the unfolded polypeptide can insert stepwise into the membrane as single β-strands or β-hairpins to fold as the native β-barrel. The refolding can be followed at a high spatial and temporal resolution, showing that small β-barrels are able to fold without assistance, whereas large and complex β-barrels require chaperone cofactors. Applied in the dynamic mode, SMFS can quantify the kinetic and mechanical properties of single β-hairpins and reveal complementary insight into the membrane protein structure and function relationship. We further outline the challenges that SMFS experiments must overcome for a comprehensive understanding of the folding and function of transmembrane β-barrel proteins.

POTRA Domains, Extracellular Lid, and Membrane Composition Modulate the Conformational Stability of the β Barrel Assembly Factor BamA

The core component BamA of the β barrel assembly machinery (BAM) adopts several conformations, which are thought to facilitate the insertion and folding of β barrel proteins into the bacterial outer membrane. Which factors alter the stability of these conformations remains to be quantified. Here, we apply single-molecule force spectroscopy to characterize the mechanical properties of BamA from Escherichia coli. In contrast to the N-terminal periplasmic polypeptide-transport-associated (POTRA) domains, the C-terminal transmembrane β barrel domain of BamA is mechanically much more stable. Exposed to mechanical stress this β barrel stepwise unfolds β hairpins until unfolding has been completed. Thereby, the mechanical stabilities of β barrel and β hairpins are modulated by the POTRA domains, the membrane composition and the extracellular lid closing the β barrel. We anticipate that these differences in stability, which are caused by factors contributing to BAM function, promote conformations of the BamA β barrel required to insert and fold outer membrane proteins.

The cohesin module is a major determinant of cellulosome mechanical stability

Cellulosomes are bacterial protein complexes that bind and efficiently degrade lignocellulosic substrates. These are formed by multimodular scaffolding proteins known as scaffoldins, which comprise cohesin modules capable of binding dockerin-bearing enzymes and usually a carbohydrate-binding module that anchors the system to a substrate. It has been suggested that cellulosomes bound to the bacterial cell surface might be exposed to significant mechanical forces. Accordingly, the mechanical properties of these anchored cellulosomes may be important to understand and improve cellulosome function. Here we used single-molecule force spectroscopy to study the mechanical properties of selected cohesin modules from scaffoldins of different cellulosomes. We found that cohesins located in the region connecting the cell and the substrate are more robust than those located outside these two anchoring points. This observation applies to cohesins from primary scaffoldins (i.e. those that directly bind dockerin-bearing enzymes) from different cellulosomes despite their sequence differences. Furthermore, we also found that cohesin nanomechanics (specifically, mechanostability and the position of the mechanical clamp of cohesin) are not significantly affected by other cellulosomal components, including linkers between cohesins, multiple cohesin repeats, and dockerin binding. Finally, we also found that cohesins (from both the connecting and external regions) have poor refolding efficiency but similar refolding rates, suggesting that the high mechanostability of connecting cohesins may be an evolutionarily conserved trait selected to minimize the occurrence of cohesin unfolding, which could irreversibly damage the cellulosome. We conclude that cohesin mechanostability is a major determinant of the overall mechanical stability of the cellulosome.

Going Vertical To Improve the Accuracy of Atomic Force Microscopy Based Single-Molecule Force Spectroscopy

Single-molecule force spectroscopy (SMFS) is a powerful technique to characterize the energy landscape of individual proteins, the mechanical properties of nucleic acids, and the strength of receptor-ligand interactions. Atomic force microscopy (AFM)-based SMFS benefits from ongoing progress in improving the precision and stability of cantilevers and the AFM itself. Underappreciated is that the accuracy of such AFM studies remains hindered by inadvertently stretching molecules at an angle while measuring only the vertical component of the force and extension, degrading both measurements. This inaccuracy is particularly problematic in AFM studies using double-stranded DNA and RNA due to their large persistence length (p ≈ 50 nm), often limiting such studies to other SMFS platforms (e.g., custom-built optical and magnetic tweezers). Here, we developed an automated algorithm that aligns the AFM tip above the DNA's attachment point to a coverslip. Importantly, this algorithm was performed at low force (10-20 pN) and relatively fast (15-25 s), preserving the connection between the tip and the target molecule. Our data revealed large uncorrected lateral offsets for 100 and 650 nm DNA molecules [24 ± 18 nm (mean ± standard deviation) and 180 ± 110 nm, respectively]. Correcting this offset yielded a 3-fold improvement in accuracy and precision when characterizing DNA's overstretching transition. We also demonstrated high throughput by acquiring 88 geometrically corrected force-extension curves of a single individual 100 nm DNA molecule in ∼40 min and versatility by aligning polyprotein- and PEG-based protein-ligand assays. Importantly, our software-based algorithm was implemented on a commercial AFM, so it can be broadly adopted. More generally, this work illustrates how to enhance AFM-based SMFS by developing more sophisticated data-acquisition protocols.