Lab-on-a-chip for ultrasensitive detection of carbofuran by enzymatic inhibition with replacement of enzyme using magnetic beads

In this paper an ultrasensitive method to determine toxicity due to pesticides in a glass lab-on-a-chip by means of enzymatic inhibition of acetylcholinesterase immobilised on magnetic beads is described. The reproducible insertion of a controlled amount of enzyme-coupled magnetic beads inside the chip channel and their immobilisation in a capture region with the aid of a magnetic field has been optimised. This procedure enables the easy renewal of the biosensing material after each determination in a highly reproducible manner. Several operational parameters such as the working potential for the selective detection of thiocholine (TCh) on a platinum disc electrode, the TCh detection reproducibility and sensitivity, the electroosmotic flow driving voltage and the inhibition time were also evaluated or optimised. The detection of carbofuran (one of the most toxic carbamate pesticides) has been achieved down to the nanomolar level.

Comparison of the partitioning of pesticides relative to the survival and behaviour of exposed amphipods

Pesticides sprayed on farmlands can end up in rivers and be transported into estuaries, where they could affect aquatic organisms in freshwater and marine habitats. A series of experiments were conducted using the amphipod Corophium volutator Pallas (Amphipoda, Corophiidae) and single pesticides, namely atrazine (AT), azinphos-methyl (AZ), carbofuran (CA) and endosulfan (EN) that were added to sediments and covered with seawater. Our goal was to compare the concentrations affecting the survival of the animals relative to potential attractant or repellent properties of sediment-spiked pesticides. The avoidance/preference of contaminated/reference sediments by amphipods was examined after 48 and 96 h of exposure using sediments with different organic carbon content. The octanol-water partition coefficients (log K(ow)) ranked the pesticides binding to sediments as EN > AZ > AT > CA. LC(50) and LC(20) covered a wide range of nominal concentrations and ranked toxicity as CA-AZ > EN > AT. Under the experimental set up, only EN initiated an avoidance response and the organic carbon normalised concentration provided consistent results. Using the present data with wide confidence limits, >20% of a population of C. volutator could perish due to the presence of EN before relocation or detecting CA or AZ in sediments by chemical analysis.

Adsorption and desorption characteristics of lindane, carbofuran and methyl parathion on various Indian soils

Adsorption and desorption characteristics of three insecticides on four Indian soils were studied. Insecticides used were representative of organochlorine, organophosphate, and carbomate groups. The order of adsorption of pesticides on soils was: lindane>methyl parathion>carbofuran. Compost soil had shown the maximum adsorption capacity. The order of adsorption capacity of various soils were: compost soil>clayey soil>red soil>sandy soil. Adsorption isotherms were better fitted to Freundlich model and Kf values increased with increase in organic matter content of the soils. Thermodynamic parameters indicated favorable adsorption of all the three pesticides in four different soils. Adsorption was exothermic in nature. Distilled water desorbed 30-60% of adsorbed pesticides whereas; organic solvents were able to affect 50-80% of sorbed pesticides. Clay content and organic matter played a significant role in pesticide adsorption and desorption processes. Hysteresis effect was observed in red, clayey and compost soils. Hysteresis effect increased with increase in organic matter and clay content of the soils.

[Determination of carbofuran residue in aquatic products by gas chromatography]

A capillary gas chromatographic (GC) method was developed for the determination of carbofuran residue in aquatic products (Ctenopharyngodon idellus and Penaens vannamei). The sample was extracted with acetonitrile, defatted by hexane, re-extracted by acetoacetate and cleaned up with a Al2O3 column, and then determined by GC. The standard curve was linear in the investigated range of 0.1 - 10.0 mg/L. The correlation coefficients were more than 0.999 5, the recoveries were 78% - 90% with the relative standard deviations of 2.49% -9.59% at the spiking levels of 0.02 - 10.0 mg/kg. The detection limit of carbofuran was 0.02 mg/kg.

Study on the downward movement of carbofuran in two Malaysian soils

The downward movement of carbofuran in two Malaysian soil types was studied using soil columns. The columns were filled with disturbed and undisturbed soils of either the Bagan Datoh soil (clay) or the Labu soil (sandy clay). The average total percentage of carbofuran in the leachate of the undisturbed Labu soil after 14 days of watering (80.8%) was approximately similar to that of the total amount from the disturbed soil (81.4%). However, carbofuran leaching was observed in the disturbed soil after the fourth day of watering whereas for the undisturbed soil, leaching occurred after the first watering. A similar trend was observed in the Bagan Datoh soil where the residue of carbofuran was detected after the first day of watering in the undisturbed soil column but only at the eighth day of watering in the disturbed soil column. The total percentage carbofuran in the leachate of disturbed and undisturbed soil columns from Bagan Datoh after 14 days of watering was 3.6% and 41.7%, respectively. The study showed that less leaching occurred in soil columns with high organic content such as the Bagan Datoh soil and especially so in disturbed soils where the organic matter was homogeneously mixed in all layers.

Development of an enzyme-linked immuno-sorbent assay (ELISA) method for carbofuran residues

The haptens 4-[[(2,3-dihydro-2,2-dimethyl-7-benzofuranyloxy)carbonyl]-amino]butanoic acid (BFNB) and 6-[((2,3-dihydro-2,2-dimethyl-7-benzofuranyloxy)-carbonylamino]hexanoic acid (BFNH) were synthesized and then used to develop a rapid,specific and sensitive ELISA method to determine residues of the pesticide carbofuran in a variety of matrices. A hybridoma cell line (5D3) producing anti-carbofuran monoclonal antibodies (MAbs) was also established. Based on the MAbs in combination with the heterologous hapten BFNH coupled to either horseradish peroxidase (HRP) or ovalbumin(OVA), four ELISAs (formats I-IV) for the quantification of carbofuran were developed and compared. Among them, the optimized format II (the conjugate-coated direct competitive ELISA) showed the best characteristics, with an IC50 value of 18.49 ng/mL, a limit of detection of 0.11 ng/mL and the shortest assay time (1 h). This ELISA method was then applied to the determinations of carbofuran in environmental water, soil and food samples. The relative standard deviations (R.S.D.s) ranged from 1.8% to 21.3% and the mean recoveries were 104.6%, 108.3%, 106.3% and 100.1% for water, soil, lettuce and cabbage, respectively. Thus, the ELISA method of format II exhibited the potential to develop commercial ELISA kits for a rapid detection of carbofuran for human health and environmental safety.

Biodegradation of lindane, methyl parathion and carbofuran by various enriched bacterial isolates

In the present study, lindane (1,2,3,4,5,6-hexachlorocyclohexane), methyl parathion (O-dimethylO-(4-nitro-phenyl) phosphorothioate) and carbofuran (2,3-dihydro-2,2-dimethyl-7-benzofuranyl methylcarbamate) degradation potential of different enriched bacterial cultures were evaluated under various environmental conditions. Enriched cultures behaved differently with different pesticides. Degradation was more in a facultative anaerobic condition as compared to that in aerobic condition. A specific pesticide enriched culture showed maximum degradation of that pesticide irrespective of pesticides and environmental conditions. Lindane and endosulfan enriched cultures behaved almost similarly. Degradation of lindane by lindane enriched cultures was 75 +/- 3% in aerobic co-metabolic process whereas 78 +/- 5% of lindane degradation occurred in anaerobic co-metabolic process. Degradation of methyl parathion by methyl parathion enriched culture was 87 +/- 1% in facultative anaerobic condition. In almost all the cases, many intermediate metabolites were observed. However, many of these metabolites disappeared after 4-6 weeks of incubation. Mixed pesticide-enriched culture degraded all the three pesticides more effectively as compared to specific pesticide- enriched cultures. It can be inferred from the results that a bacterial consortium enriched with a mixture of all the possible pesticides that are present in the site seems to be a better option for the effective bioremediation of multi-pesticide contaminated site.

Dissipation of carbofuran and carbaryl on Oolong tea during tea bushes, manufacturing and roasting processes

Carbofuran (2,3-dihydro-2,2-dimethyl-7-benzofuranol-N-methylcarbamate) and carbaryl (1-naphthyl-N-methylcarbamate) are insecticides widely used in tea plantations. The objective of the present study was to evaluate the dissipation of carbofuran and carbaryl during the growth periods of Oolong tea, processing and roasting. Analysis of the residual insecticides was carried out using high-pressure liquid chromatography with a post-column fluorescence detector. Results showed that in the tea field carbofuran dissipated faster then carbaryl. Manufacturing processes of Oolong tea further reduced the carbofuran and carbaryl contents. The persistence of carbofuran and carbaryl was decreased with increasing roasting temperature. From the results, we conclude that the presence of carbofuran and carbaryl in tea can be reduced by proper field management, manufacturing and roasting processes.

Quantitative determination of diuron in ground and surface water by time-resolved fluoroimmunoassay: seasonal variations of diuron, carbofuran, and paraquat in an agricultural area

The aim of this research is to develop an ultrasensitive time-resolved fluorescence immunoassay (TR-FIA) for herbicide diuron in water samples. This method appears to be a promising approach, instead of conventional analytical techniques, in the screening procedure of organic pollutants because it is simple, rapid, and specific, and it does not require sample preconcentration or cleanup. Lanthanide chelate used as label allows to achieve sensitivity even 10 times higher than most of the other techniques. It has been applied to monitoring diuron contamination in specimens collected along a year in an agricultural area. The water specimens were collected monthly from lake, well, and irrigation ditch in the agricultural area south of Milan. Assay was performed using diuron-specific polyclonal antibody raised in sheep; as fluorescent marker, we used rabbit antisheep IgG conjugated with a chelating molecule complexed with Eu3+. The compound 4-(3-(3,4-dichloro-phenyl)-1-methyl-ureido)-butyric acid (CPD) was synthesized and conjugated with bovine serum albumin (BSA) to prepare a solid phase. Sensitivity achieved was 20 ng L-1 below the European Community limits. Paraquat (PQ) and carbofuran (CF) presence in the same samples has been also evaluated in a similar way, using immunoassays with time-resolved revelation systems. Diuron concentration shows a peak coinciding with a peak of carbofuran during summer periods. The peak of diuron was 65 pg/mL in June and 180 pg/mL in September in ditch and lake water samples, respectively; carbofuran concentration was higher than diuron in all samples: a carbofuran peak was revealed in September and October resulting in 87 ng/mL. Herbicide paraquat was not detectable in any assayed sample.

High-sensitivity detection for model organophosphorus and carbamate pesticide with quartz crystal microbalance-precipitation sensor

The effect of acetylcholinesterase (AChE) immobilization over the surface of a quartz crystal microbalance (QCM), by chemisorption of the AChE thiolated with a heterobifunctional cross-linker, sulfo-succinimidyl-6-[3-(2-pyridyldithio)propionamido]hexanoate, and carboxyl-amine coupling of AChE to 3-mercaptopropionic acid self-assembled monolayer, on the responses of a batch-type QCM-precipitation sensor was compared, resulting in a better sensitivity and binding efficiency in the former method. When an inhibition study with the developed sensor was undertaken at the optimized AChE immobilization with varying concentrations of a model organophosphorus pesticide EPN and carbamate one carbofuran, a sensitive detection for them was possible with the limit of detection corresponding to 1.55 x 10(-8) and 1.30 x 10(-9)M, respectively.

Liquid Chromatography Quadrupole Time-of-Flight Mass Spectrometry Analysis of Carbosulfan, Carbofuran, 3-Hydroxycarbofuran, and Other Metabolites in Food

The potential of liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QqTOF-MS) to identify and confirm carbosulfan and seven of its main metabolites (carbofuran, 3-hydroxycarbofuran, 3-ketocarbofuran, 3-hydroxy-7-phenol carbofuran, 3-keto-7-phenolcarbofuran, 7-phenolcarbofuran, dibutylamine) at trace levels from food is explored for the first time. The analytical method developed consists of pressurized liquid extraction (PLE) and LC-QqTOF-MS in positive ion mode, which attains unequivocal identification and quantification of the studied compounds in food, at levels well below of those of concern (0.05 mg/kg for the sum of carbosulfan, carbofuran, and 3-hydroxycarbofuran). PLE recoveries ranged from 55 to 94% with limits of quantification from 10 (for carbosulfan, carbofuran, 3-hydroxycarbofuran, and dibutylamine) to 70 microg/kg (3-keto-7-phenolcarbofuran). The method is precise, with relative standard deviations varying between 5 and 11% for the repeatability (within-day) and 8-13% for the reproducibility (interday). This method was used to monitor the presence and fate of the target compounds in orange, potato, and rice crops treated with a commercial product containing carbosulfan. Field degradation studies show that carbofuran, 3-hydroxycarbofuran, and dibutylamine are the main degradation products formed in the environmental disappearance of carbosulfan.

Flow-injection determination of carbaryl and carbofuran based on KMnO4–Na2SO3 chemiluminescence detection

A flow-injection method is described for the determination of carbaryl and carbofuran. It was found that a strong chemiluminescence (CL) signal was generated when these pesticides were mixed with Na(2)SO(3) and KMnO(4) in acidic medium. Under the optimum experimental conditions, the enhanced CL intensity was linear, with the concentrations in the range 0.1-2.0 microg/mL (r(2) = 0.9996 and 0.9993, n = 6) with relative standard deviation (n = 4) in the range 1.0-2.3%. The limits of detection (3sigma blank) were 10 and 50 ng/mL, respectively, with a sample throughput of 180/h. The proposed method was applied to determine carbaryl and carbofuran in freshwaters with satisfactory results. Most metal and non-metal ions and some pesticides, such as carbophenothion and aldicarb, do not interfere with the determination. Dinoseb, diazinon and malathion calibration graphs (in the range 0.2-2.0 microg/mL, r(2) = 0.9966-0.9988, n = 6) were also established with relative standard deviations (n = 4) in the range 1.2-2.0% with limits of detection (3sigma blank) in the range 100-300 ng/mL.

Investigation of pyrolysis behavior of carbofuran by pyrolysis-gas chromatography-mass spectrometry

Carbofuran is a kind of carbamate pesticide commonly used on major crops. For understanding of the composition variation versus temperature and pyrolysis mechanism, its pyrolysis behavior was simulated and investigated by pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS). The pyrolysates were directly injected for GC-MS analysis. Totally 86 components were determined based on mass spectra library matching with the aid of the correlation of boiling point (bp) and retention time. It was found that carbofuran was obviously decomposed with the temperature increase. A large number of mono aromatics and polycyclic aromatic hydrocarbons (PAHs) were formed when the temperature was higher than 750 degrees C, and the higher was the temperature, the more was the content of the corresponding aromatic hydrocarbon. Besides the aromatic hydrocarbons, there were oxygenous and/or nitrogenous compounds produced in the pyrolysis process. Furthermore, the pyrolysis mechanism of carbofuran was proposed based on the determined pyrolysates and their contents variation versus the temperature. The investigation results can provide the useful information for understanding of the thermal behavior of carbofuran and evaluation of the potential influence of the pyrolysates to living thing and the environment.

Determination of pesticides in soy-based infant formula using liquid chromatography with electrospray ionization tandem mass spectrometry

A sensitive method using liquid chromatography with electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS) was developed and validated to quantify and confirm 13 pesticides, including aldicarb sulfoxide, aldicarb sulfone, oxamyl, methomyl, formetanate, 3-hydroxycarbofuran, carbendazim, thiabendazole, aldicarb, propoxur, carbofuran, carbaryl, and methiocarb, in soy-based infant formula. Data acquisition under MS/MS was achieved by applying multiple reaction monitoring of 2 fragment ion transitions to provide a high degree of sensitivity and selectivity for both quantitation and confirmation. Different approaches to constructing calibration curves were compared and discussed to address issues of the extraction efficiency or recovery, and matrix effects. Matrix-matched standard calibration curves with the use of isoprocarb as an internal standard were finally used to achieve the best accuracy of the method. Under most circumstances, recoveries of 13 pesticides, spiked at 5.0, 25.0, and 45.0 microg/kg, were close to 100%. The method detection limits (signal-to-noise ratio > or =3:1; microg/kg) of 13 pesticides were 0.2 for thiabendazole and methiocarb, 0.6 for aldicarb, and 0.1 for the others.

Comparison of four mass analyzers for determining carbosulfan and its metabolites in citrus by liquid chromatography/mass spectrometry

Four liquid chromatography/mass spectrometry (LC/MS) systems, equipped with single quadrupole, triple quadrupole (QqQ), quadrupole ion trap (QIT) and quadrupole time-of-flight (QqTOF) mass analyzers, were evaluated for the analysis of carbosulfan and its main transformation products. The comparison of quantitative aspects (sensitivity, precision and accuracy) was emphasized. Results showed that the triple quadrupole instrument reaches at least 20-fold higher sensitivity (LOD from 0.04 to 0.4 microg kg(-1)) compared to the single quadrupole (4-70 microg kg(-1)), the QIT (4-25 microg kg(-1)) and the QqTOF (4-23 microg kg(-1)) instruments. Recoveries were over 70% for all the analytes, except dibutylamine and 7-phenolcarbofuran. Repeatabilities (within-day) were slightly better by the single quadrupole (5-10%) and the QqQ (5-9%) than by the QIT (12-16%) and the QqTOF (9-16%). Both the QqTOF and QIT offer a linear dynamic range of two orders of magnitude whereas the single quadrupole and QqQ of, at least, three orders of magnitude. The method was applied to analyze carbosulfan field-treated orange samples, in which carbosulfan, carbofuran, 3-hydroxycarbofuran, and dibutylamine were found. As an example, the mean carbosulfan concentration was 20 +/- 0.6 microg kg(-1) measured by the QqQ, 22 +/- 1.2 microg kg(-1) by the single quadrupole, 25 +/- 2.8 microg kg(-1) by the QIT, and 20 +/- 1.8 microg kg(-1) by the QqTOF. Although the QqQ is more sensitive and precise, the mean values obtained by the four instruments are acceptable and comparable. The potential of each technique for the verification of the identity of residues detected in oranges is discussed using the concept of identification points.

Comparison of two methods for estimation of soil sorption for imidacloprid and carbofuran

Predicting the fate and transport of pesticides in soil environment is an important issue especially in understanding and modelling of the environmental behaviour of pesticides. Classical batch sorption method often has been identified as insufficient to derive the actual extent of sorption. In this study, the batch equilibrium method was compared to the centrifugation method, which can permit measurement of sorption under more natural conditions. The results of the comparison of the batch with the centrifugation method for imidacloprid and carbofuran pesticides indicate that the batch method overestimates sorption in comparison to the centrifugation method. These results are in agreement with others, which use high soil:solution ratios with batch and those that used the centrifugation method.

Determination of carbamate insecticides in Chinese medicinal herbs by gas chromatography with a nitrogen-phosphorus detector

A simplified method for determining carbamate insecticides (including metolcarb, isoprocarb, fenobucarb, carbofuran, pirimicarb, and carbaryl) in Chinese medicinal herbs (White Peony Alba, Red Peony Root, and Baical Skullcap Root) is described. Standards were fortified into Chinese medicinal herbs at 3 levels (0.05-0.5 mg/kg). The carbamates were extracted with dichloromethane in a Soxhlet apparatus and analyzed by gas chromatography with a nitrogen-phosphorus detector. The results showed average recoveries between 80.77 and 104.56%. The method evidenced good robustness, accuracy, and precision for monitoring carbamates in Chinese medicinal herb samples, and it is a suitable alternative to replace the currently dedicated analytical systems. The minimum detectable amount ranged from 3.0 x 10(-10) to 5.0 x 10(-10)g, and the limit of quantification was 0.05 mg/kg. The method is rapid, simple, sensitive, and reproducible, and it can be conveniently used as a low-cost, rapid method for measuring the carbamate insecticide contamination of Chinese medicinal herbs.

Flow-through fluorescence-based optosensor with on-line solid-phase separation for the simultaneous determination of a ternary pesticide mixture

A rapid and selective method was developed for the simultaneous determination of 3 widely used pesticides, carbendazim (CBZ), carbofuran (CF), and benomyl (BNM). The method utilized a single continuous-flow, solid surface fluorometric multioptosensor implemented with a previous separation of the analytes on a minicolumn, placed just before the sensor, that was packed with the same solid support (C18 silica gel) as the flow-through cell. The separation was achieved because of the different kinetics of retention/elution of the pesticides on the solid support in the minicolumn, enabling the sequential arrival of the analytes at the sensing zone. With a single injection of the mixture, 2 of them were more strongly retained in the minicolumn (CF and BNM) while the other (CBZ) passed through the system towards the sensing material where it developed its fluorescence transitory signal. Then, CF and BNM were successively eluted from the solid support using 2 different eluting solutions, and they sequentially reached the sensing zone and developed their respective signals. A multiwavelength fluorescence detection mode was used, recording the signals of each pesticide at its maximum excitation/emission wavelength; therefore, the sensitivity was increased. The system was calibrated using a sample volume of 2000 microL. The linear dynamic range was 80-1400, 250-2400, and 150-2000 ng/mL with detection limits of 15, 68, and 35 ng/mL and relative standard deviation values of 3.5, 3.2, and 2.4% for CBZ, CF, and BNM, respectively. A recovery study was applied to spiked environmental water samples, and recoveries ranged from 96 to 104%.

[Studies of immunoaffinity chromatography for carbofuran]

The purified anti-carbofuran antibody was conjugated to carbonyl diimidazole (CDI)-activated Sepharose CL-4B to synthesize the immunosorbent for the immunoaffinity chromatographic (IAC) column specific to carbofuran. The conditions of IAC were optimized as follows: pH 7.2 phosphate buffer (PB) was used as equilibrium and adsorbent medium, and methanol-water (60:40, v/v) as eluent. The results showed that the dynamic column capacity was up to 1.58 mg/L bed volume. The efficiency of enrichment of IAC was more than 167 times when the initial concentration of carbofuran in a standard sample solution was lower than 2 microg/L. The spiked river water was cleaned up and enriched by IAC, and carbofuran in eluate was determined by enzyme linked immunosorbent assay (ELISA). The average recovery of carbofuran from river water was 89.8% with the relative standard deviation of 4.8% at the spiked level of 0.1 mg/L. Meanwhile the eluate was determined by high performance liquid chromatography (HPLC), the results from HPLC correlated well with those from ELISA. The IAC method of carbofuran was successfully established.

A comparative study on the dissipation and microbial metabolism of organophosphate and carbamate insecticides in orchaqualf and fluvaquent soils of West Bengal

An experiment has been conducted under laboratory conditions to investigate the effect of phorate (an organophosphate insecticide) and carbofuran (a carbamate insecticide) at their recommended field rates (1.5 and 1.0 kga.i.ha-1, respectively) on the growth and multiplication of microorganisms as well as rate of dissipation and persistence of the insecticidal residues including their metabolites in laterite (typic orchaqualf) and alluvial (typic fluvaquent) soils of West Bengal. Application of phorate and carbofuran in general, induced growth and development of bacteria, actinomycetes, fungi, N2-fixing bacteria and phosphate solubilizing microorganisms in both the soils and the stimulation was more pronounced with phorate as compared to carbofuran. Application of phorate recorded highest stimulation of fungi in laterite and actinomycetes in alluvial soil. Carbofuran on the other hand, augmented fungi and N2-fixing bacteria in laterite and actinomycetes in alluvial soil. Bacterial population was inhibited due to the application of carbofuran in alluvial soil. Phorate sulfoxide and phorate sulfone, the two metabolites of phorate and 3-hydroxycarbofuran and 3-ketocarbofuran, the two metabolites of carbofuran isolated were less persistent in both the soils. Phorate persisted in laterite and alluvial soils up to 45 and 60 days, respectively depicting the half-life (T1/2) 9.7 and 11.5 days, respectively while the T1/2 of carbofuran for the said soils were 16.9 and 8.8 days, respectively. No metabolite of carbofuran was detected in soils after 30 days of incubation while phorate sulfone persisted in alluvial soil even after 60 days of application of the insecticide.

Determination of carbofuran by flow-injection with chemiluminescent detection

It was found that carbofuran enhances the chemiluminescence reaction between sodium sulphite and Ce(4+) in sulphuric acid, and this formed the basis of a flow-injection system with chemiluminescence detection for determination of carbofuran. Under optimum conditions, the enhanced chemiluminescence intensity was linear, with the concentration of carbofuran in the range 8 x 10(-8)-1.0 x 10(-5) g[sol ]mL, with a detection limit of 2.84 x 10(-8) g[sol ]mL (3 s[sol ]k). The proposed method was applied to the analysis of carbofuran in cabbage, with satisfactory results.

Characterization of carbofuran photodegradation by-products by liquid chromatography/hybrid quadrupole time-of-flight mass spectrometry

The structural elucidation of by-products arising from carbofuran photodegradation using a high-pressure UV lamp has been investigated by liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS) employing a quadrupole time-of-flight mass spectrometer. Exact mass measurements of the [M + H]+ ions of the by-products and of product ions allowed the elemental formulae and related structures of seven photodegradation by-products (resulting, respectively, from photo-Fries rearrangement, hydroxylation of the benzene ring, oxidation of the 2,3-dihydrobenzofuran ring, cleavage of the carbamate group, hydrolysis of the ether group and the newly observed radical coupling and decarboxylation processes) to be determined confidently. Accurate mass measurements of product ions allowed ambiguities to be removed concerning neutral losses having the same nominal mass, namely CO and C2H4, allowing the fragmentation patterns to be rationalized.

Nanocolloidal gold-based immunoassay for the detection of the N-methylcarbamate pesticide carbofuran

Nanocolloidal gold particles were prepared and labeled to an anti-carbofuran monoclonal antibody (Mab). This conjugate was dispensed on the conjugated pad of a porous glass fiber. Ovalbumin (OVA)-carbofuran and goat anti-mouse IgG were dispensed on the nitrocellulose (NC) membrane and served as the test line and control line, respectively. The carbofuran-containing sample migrated to the NC membrane and reacted with the anti-carbofuran Mab labeled with the colloidal gold. The mixture diffused along the membrane and passed through the OVA-carbofuran in the test line via capillary action. The more analyte present in the sample, the more effectively it will compete with the carbofuran immobilized on the test line for binding to the limited amount of antibody labeled with colloidal gold. An adequate amount of carbofuran could prevent attachment of the colored conjugate to the test line. The presence or absence of a colored band on the test line could indicate a negative or positive result, respectively. When measured to the water sample spiked with carbofuran, this was obtained at or above 0.25 mg/L of carbofuran. The major advantages of the one-step strip test are that the detection time needed was <10 min and all of the reagents are included in the test device.