Measurement of the t-channel single top quark production cross section in pp collisions at √s=7 TeV

Electroweak production of the top quark is measured for the first time in pp collisions at √=7  TeV, using a data set collected with the CMS detector at the LHC and corresponding to an integrated luminosity of 36  pb⁻¹. With an event selection optimized for t-channel production, two complementary analyses are performed. The first one exploits the special angular properties of the signal, together with background estimates from the data. The second approach uses a multivariate analysis technique to probe the compatibility with signal topology expected from electroweak top-quark production. The combined measurement of the cross section is 83.6±29.8(stat+syst)±3.3(lumi)  pb, consistent with the standard model expectation.

Indications of suppression of excited Υ states in Pb-Pb collisions at √(s(NN))=2.76 TeV

A comparison of the relative yields of Υ resonances in the μ(+)μ(-) decay channel in Pb-Pb and pp collisions at a center-of-mass energy per nucleon pair of 2.76 TeV is performed with data collected with the CMS detector at the LHC. Using muons of transverse momentum above 4  GeV/c and pseudorapidity below 2.4, the double ratio of the Υ(2S) and Υ(3S) excited states to the Υ(1S) ground state in Pb-Pb and pp collisions, [Υ(2S+3S)/Υ(1S)](Pb-Pb)/[Υ(2S+3S)/Υ(1S)](pp), is found to be 0.31(-0.15)(+0.19)(stat)±0.03(syst). The probability to obtain the measured value, or lower, if the true double ratio is unity, is calculated to be less than 1%.

Measurement of the polarization of W bosons with large transverse momenta in W + jets events at the LHC

A first measurement of the polarization of W bosons with large transverse momenta in pp collisions is presented. The measurement is based on 36 pb⁻¹ of data recorded at √s = 7 TeV by the CMS detector at the LHC. The left-handed, right-handed, and longitudinal polarization fractions (f(L), f(R), and f₀, respectively) of W bosons with transverse momenta larger than 50 GeV are determined by using decays to both electrons and muons. The muon final state yields the most precise measurement: (f(L) - f(R))⁻ = 0.240 ± 0.036(stat) ± 0.031(syst) and f₀⁻ = 0.183 ± 0.087(stat) ± 0.123(syst) for negatively charged W bosons and (f(L) - f(R))⁺ = 0.310 ± 0.036(stat) ± 0.017(syst) and f₀⁺ = 0.171 ± 0.085(stat) ± 0.099(syst) for positively charged W bosons. This establishes, for the first time, that W bosons produced in pp collisions with large transverse momenta are predominantly left-handed, as expected in the standard model.

Measurement of the B0 production cross section in pp collisions at sqrt[s] = 7 TeV

Measurements of the differential production cross sections dσ/dpTB and dσ/dyB for B0 mesons produced in pp collisions at sqrt[s] = 7 TeV are presented. The data set used was collected by the CMS experiment at the LHC and corresponds to an integrated luminosity of 40 pb-1. The production cross section is measured from B0 meson decays reconstructed in the exclusive final state J/ψKS0, with the subsequent decays J/ψ → μ + μ - and KS0 → π+}π-. The total cross section for pTB>5 GeV and |yB|<2.2 is measured to be 33.2 ± 2.5 ± 3.5 μb, where the first uncertainty is statistical and the second is systematic.

Search for neutral minimal supersymmetric standard model Higgs bosons decaying to tau pairs in pp collisions at √s=7 TeV

A search for neutral minimal supersymmetric standard model (MSSM) Higgs bosons in pp collisions at the LHC at a center-of-mass energy of 7 TeV is presented. The results are based on a data sample corresponding to an integrated luminosity of 36  pb(-1) recorded by the CMS experiment. The search uses decays of the Higgs bosons to tau pairs. No excess is observed in the tau-pair invariant-mass spectrum. The resulting upper limits on the Higgs boson production cross section times branching fraction to tau pairs, as a function of the pseudoscalar Higgs boson mass, yield stringent new bounds in the MSSM parameter space.

Search for supersymmetry in pp collisions at √7 TeV in events with two photons and missing transverse energy

A search for supersymmetry in the context of general gauge-mediated breaking with the lightest neutralino as the next-to-lightest supersymmetric particle and the gravitino as the lightest is presented. The data sample corresponds to an integrated luminosity of 36 pb(-1) recorded by the CMS experiment at the LHC. The search is performed by using events containing two or more isolated photons, at least one hadronic jet, and significant missing transverse energy. No excess of events at high missing transverse energy is observed. Upper limits on the signal cross section for general gauge-mediated supersymmetry between 0.3 and 1.1 pb at the 95% confidence level are determined for a range of squark, gluino, and neutralino masses, excluding supersymmetry parameter space that was inaccessible to previous experiments.

Study of Z Boson Production in PbPb Collisions at √S(NN)=2.76 TeV

A search for Z bosons in the μ(+)μ(-) decay channel has been performed in PbPb collisions at √S(NN)=2.76  TeV with the CMS detector at the LHC, in a 7.2 μb(-1) data sample. The number of opposite-sign muon pairs observed in the 60-120 GeV/c(2) invariant mass range is 39, corresponding to a yield per unit of rapidity (y) and per minimum bias event of [33.8±5.5(stat)±4.4(syst)]×10(-8), in the |y|<2.0 range. Rapidity, transverse momentum, and centrality dependencies are also measured. The results agree with next-to-leading order QCD calculations, scaled by the number of incoherent nucleon-nucleon collisions.

Measurement of dijet angular distributions and search for quark compositeness in pp collisions at √s = 7 TeV

Dijet angular distributions are measured over a wide range of dijet invariant masses in pp collisions at √s = 7 TeV, at the CERN LHC. The event sample, recorded with the CMS detector, corresponds to an integrated luminosity of 36 pb⁻¹. The data are found to be in good agreement with the predictions of perturbative QCD, and yield no evidence of quark compositeness. With a modified frequentist approach, a lower limit on the contact interaction scale for left-handed quarks of Λ⁺ = 5.6 TeV (Λ⁻ = 6.7 TeV) for destructive (constructive) interference is obtained at the 95% confidence level.

Search for pair production of second-generation scalar leptoquarks in pp collisions at √s = 7 TeV

A search for pair production of second-generation scalar leptoquarks in the final state with two muons and two jets is performed using proton-proton collision data at √s = 7 TeV collected by the CMS detector at the LHC. The data sample used corresponds to an integrated luminosity of 34 pb⁻¹. The number of observed events is in good agreement with the predictions from the standard model processes. An upper limit is set on the second-generation leptoquark cross section times β² as a function of the leptoquark mass, and leptoquarks with masses below 394 GeV are excluded at a 95% confidence level for β = 1, where β is the leptoquark branching fraction into a muon and a quark. These limits are the most stringent to date.

Search for pair production of first-generation scalar leptoquarks in pp collisions at √s = 7 TeV

A search for pair production of first-generation scalar leptoquarks is performed in the final state containing two electrons and two jets using proton-proton collision data at √s = 7 TeV. The data sample used corresponds to an integrated luminosity of 33 pb⁻¹ collected with the CMS detector at the CERN LHC. The number of observed events is in good agreement with the predictions for the standard model background processes, and an upper limit is set on the leptoquark pair production cross section times β² as a function of the leptoquark mass, where β is the branching fraction of the leptoquark decay to an electron and a quark. A 95% confidence level lower limit is set on the mass of a first-generation scalar leptoquark at 384 GeV for β = 1, which is the most stringent direct limit to date.

A uniaxial tensile stage with tracking capabilities for micro X-ray diffraction applications

First results are presented for a uniaxial tensile stage designed to operate on a scanning micro X-ray diffraction synchrotron beamline. The new tensile stage allows experiments at typical loading cycles used in standard engineering stress–strain tests. Several key features have been implemented to supportin situloading experiments at the intragranular length scale. The physical size and weight of the load cell were minimized to maintain the correct working distance for the X-ray focusing optics and to avoid overloading the high-resolution raster scan translation stages. A high-magnification optical microscope and image correlation code were implemented to enable automated online tracking capabilities during macroscopic elongation of the sample. Preliminaryin situtensile loading experiments conducted on beamline 12.3.2 at the Advanced Light Source using a polycrystalline commercial-purity Ti test piece showed that the elastic–plastic response of individual grains could be measured with submicrometre spatial resolution. The experiments highlight the unique instrumentation capabilities of the tensile stage for direct measurement of deviatoric strain and observation of dislocation patterning on an intragranular length scale as a function of applied load.

Dijet azimuthal decorrelations in pp collisions at √s=7 TeV

Measurements of dijet azimuthal decorrelations in pp collisions at √s=7 TeV using the CMS detector at the CERN LHC are presented. The analysis is based on an inclusive dijet event sample corresponding to an integrated luminosity of 2.9 pb⁻¹. The results are compared to predictions from perturbative QCD calculations and various Monte Carlo event generators. The dijet azimuthal distributions are found to be sensitive to initial-state gluon radiation.

Measurement of the B(+) production cross section in pp collisions at sqrt[s]=7 TeV

Measurements of the total and differential cross sections dσ/dp(T)(B) and dσ/dy(B) for B(+) mesons produced in pp collisions at sqrt[s]=7  TeV are presented. The data correspond to an integrated luminosity of 5.8  pb(-1) collected by the CMS experiment operating at the LHC. The exclusive decay B(+)→J/ψK(+), with J/ψ→μ(+)μ(-), is used to detect B(+) mesons and to measure the production cross section as a function of p(T)(B) and y(B). The total cross section for p(T)(B)>5  GeV and |y(B)|<2.4 is measured to be 28.1±2.4±2.0±3.1  μb, where the first uncertainty is statistical, the second is systematic, and the last is from the luminosity measurement.

Measurement of the isolated prompt photon production cross section in pp collisions at √s=7 TeV

The differential cross section for the inclusive production of isolated prompt photons has been measured as a function of the photon transverse energy E(T)(γ) in pp collisions at √s=7  TeV using data recorded by the CMS detector at the LHC. The data sample corresponds to an integrated luminosity of 2.9  pb(-1). Photons are required to have a pseudorapidity |η(γ)|<1.45 and E(T)(γ)>21  GeV, covering the kinematic region 0.006<x(T)<0.086. The measured cross section is found to be in agreement with next-to-leading-order perturbative QCD calculations.

Microstructure Control for Thin Film Metallization

A strategy was developed for controlling hillock formation in thin metal films by controlling the fiber texture to be of a relatively “weak” orientation. Two-dimensional molecular dynamics (MD) simulations were performed to determine the parameter dependencies of texturing under ion beam assisted deposition. Simulations showed that even for film orientations that have a lower number of nearest neighbor surface bonds, the reduction in sputtering rate by ion channeling will favor the growth of the grains aligned with their channeling direction in the direction of the ion beam. Higher energies should result in greater sputtering and a higher surface roughness. Confirmatory experiments were performed by growing Al films using ion beam assisted deposition in which the Ne ion beam was normal to the substrate surface. For all energies above 0 eV/atom, the fiber texture contained a (220) component and, at high normalized energies, the fiber texture was heavily (220) dominated. Subsequent annealing at 450°C for 30 min. resulted in hillock formation in the PVD (physical vapor deposition) condition, a reduction in the hillock density by two orders of magnitude in the 120 eV/atom condition and complete elimination of hillocking above 800 eV/atom. Although the surface roughness increased with ion beam energy as modeled by MD, the surface became smoother during annealing. These results show that the fiber texture can be controlled in a thin metal film in such a way as to eliminate hillock formation, that molecular dynamics simulation is a valuable predictive tool for guiding experiments in the development of thin film microstructures and that ion beam assisted deposition is an effective, practical tool for controlling microstructures of thin metal films.

Search for stopped Gluinos in pp collisions at square root s=7 TeV

The results of the first search for long-lived gluinos produced in 7 TeV pp collisions at the CERN Large Hadron Collider are presented. The search looks for evidence of long-lived particles that stop in the CMS detector and decay in the quiescent periods between beam crossings. In a dataset with a peak instantaneous luminosity of 1×10(32) cm-2 s-1, an integrated luminosity of 10 pb-1, and a search interval corresponding to 62 hours of LHC operation, no significant excess above background was observed. Limits at the 95% confidence level on gluino pair production over 13 orders of magnitude of gluino lifetime are set. For a mass difference mg - mχ1(0) >100 GeV/c2, and assuming BR(g→gχ1(0))=100%, mg < 370 GeV/c2 are excluded for lifetimes from 10 μs to 1000 s.

Search for quark compositeness with the dijet centrality ratio in pp collisions at √s=7 TeV

A search for quark compositeness in the form of quark contact interactions, based on hadronic jet pairs (dijets) produced in proton-proton collisions at √s=7 TeV, is described. The data sample of the study corresponds to an integrated luminosity of 2.9 pb(-1) collected with the CMS detector at the LHC. The dijet centrality ratio, which quantifies the angular distribution of the dijets, is measured as a function of the invariant mass of the dijet system and is found to agree with the predictions of the standard model. A statistical analysis of the data provides a lower limit on the energy scale of quark contact interactions. The sensitivity of the analysis is such that the expected limit is 2.9 TeV; because the observed value of the centrality ratio at high invariant mass is below the expectation, the observed limit is 4.0 TeV at the 95% confidence level.

Search for dijet resonances in 7 TeV pp collisions at CMS

A search for narrow resonances in the dijet mass spectrum is performed using data corresponding to an integrated luminosity of 2.9 pb⁻¹ collected by the CMS experiment at the Large Hadron Collider. Upper limits at the 95% confidence level are presented on the product of the resonance cross section, branching fraction into dijets, and acceptance, separately for decays into quark-quark, quark-gluon, or gluon-gluon pairs. The data exclude new particles predicted in the following models at the 95% confidence level: string resonances, with mass less than 2.50 TeV, excited quarks, with mass less than 1.58 TeV, and axigluons, colorons, and E6 diquarks, in specific mass intervals. This extends previously published limits on these models.

First measurement of Bose-Einstein correlations in proton-proton collisions at √s=0.9 and 2.36 TeV at the LHC

Bose-Einstein correlations have been measured using samples of proton-proton collisions at 0.9 and 2.36 TeV center-of-mass energies, recorded by the CMS experiment at the CERN Large Hadron Collider. The signal is observed in the form of an enhancement of pairs of same-sign charged particles with small relative four-momentum. The size of the correlated particle emission region is seen to increase significantly with the particle multiplicity of the event.

Transverse-momentum and pseudorapidity distributions of charged hadrons in pp collisions at square root of s = 7 TeV

Charged-hadron transverse-momentum and pseudorapidity distributions in proton-proton collisions at square root of s = 7  TeV are measured with the inner tracking system of the CMS detector at the LHC. The charged-hadron yield is obtained by counting the number of reconstructed hits, hit pairs, and fully reconstructed charged-particle tracks. The combination of the three methods gives a charged-particle multiplicity per unit of pseudorapidity dN(ch)/dη|(|η|<0.5) = 5.78 ± 0.01(stat) ± 0.23(syst) for non-single-diffractive events, higher than predicted by commonly used models. The relative increase in charged-particle multiplicity from square root of s = 0.9 to 7 TeV is [66.1 ± 1.0(stat) ± 4.2(syst)]%. The mean transverse momentum is measured to be 0.545 ± 0.005(stat) ± 0.015(syst)  GeV/c. The results are compared with similar measurements at lower energies.

High-resolution calorimetric study of the nematic to smectic-A transition in aligned liquid crystal-aerosil gels

High-resolution ac calorimetry has been used to study the nematic to smectic- A (N-SmA) phase transition in the liquid crystal octylcyanobiphenyl (8CB) confined in aligned colloidal aerosil gels. A stable and robust nematic alignment was achieved by repeated thermal cycling of the samples in the presence of a strong uniform magnetic field. In some ways (such as transition temperature and integrated enthalpy), the dependence of the specific heat peak associated with the N-SmA transition on the aerosil density for aligned gels is consistent with that observed in unaligned (random) gel samples. However, a power-law analysis reveals that the behavior of the critical exponent alpha is quite different. For random gels, alpha varies gradually with aerosil density, whereas we find that alpha for aligned gels shifts abruptly to an XY -like value for the lowest aerosil density studied and remains essentially constant as the sil density increases. This aerosil density independence of alpha is consistent with the critical behavior of the smectic correlation lengths obtained from an x-ray scattering study of 8CB in aligned aerosil gels. The combined calorimetric and x-ray results indicate that the role of quenched randomness in aligned gels of 8CB+sils differs significantly from that in random gels.

Molecular replacement studies on crystal structure of allophycocyanin from red algaePorphyra yezoensis

Using the crystal structure of allophycocyanin from cyanobacteriumSpirulina platensis (APC-SP) as a search model, the crystal structure of allophycocyanin from red algaePorphyra yezoensis (APC-PY) has been studied by molecular replacement methods. The APC-PY crystals (Form 3) belong to the space group of R32, cell dimensions a =b = 10.53 nm,c = 18.94 nm, alpha= beta = 90 degrees , gamma= 120 degrees ; there is one alphabeta monomer in each crystallographic asymmetric unit in the cell. The translation function search gave a unique peak with a correlation coefficient (Cc) of 67.0% and an R-factor of 36.1 % for reflection data from 1.0 to 0.4 nm. Using the results by molecular replacement, the initial model of APC-PY was built, and the coincidence of the chromophore in APC-PY initial model with its2F (o)- F(c) OMIT map further confirms the results by molecular replacement.

Application of white-beam X-ray microdiffraction for the study of mineralogical phase identification in ancient Egyptian pigments

High-brightness synchrotron X-rays together with precision achromatic focusing optics on beamline 7.3.3 at the Advanced Light Source have been applied for Laue microdiffraction analysis of mineralogical phases in Egyptian pigments. Although this task is usually performed using monochromatic X-ray diffraction, the Laue technique was both faster and more reliable for the present sample. In this approach, white-beam diffraction patterns are collected as the sample is raster scanned across the incident beam (0.8 µm × 0.8 µm). The complex Laue diffraction patterns arising from illumination of multiple grains are indexed using the white-beam crystallographic software packageXMAS, enabling a mineralogical map as a function of sample position. This methodology has been applied to determine the mineralogy of colour pigments taken from the ancient Egyptian coffin of Tjeseb, a priestess of the Apis bull dating from the Third Intermediate to Late period, 25th Dynasty to early 26th Dynasty (747 to 600 BC). For all pigments, a ground layer of calcite and quartz was identified. For the blue pigment, cuprorivaite (CuCaSi4O10) was found to be the primary colouring agent with a grain size ranging from ∼10 to 50 µm. In the green and yellow samples, malachite [Cu2(OH)2CO3] and goethite [FeO(OH)] were identified, respectively. Grain sizes from these pigments were significantly smaller. It was possible to index some malachite grains up to ∼20 µm in size, while the majority of goethite grains displayed a nanocrystalline particle size. The inability to obtain a complete mineralogical map for goethite highlights the fact that the incident probe size is considerably larger than the grain size. This limit will continue to improve as the present trend is toward focusing optics approaching the diffraction limit (∼1000× smaller beam area).

Slow, nondiffusive dynamics in concentrated nanoemulsions

Using multispeckle x-ray photon correlation spectroscopy, we have measured the slow, wave-vector-dependent dynamics of concentrated, disordered nanoemulsions composed of silicone oil droplets in water. The intermediate scattering function possesses a compressed exponential line shape and a relaxation time that varies inversely with wave vector. We interpret this dynamics as strain in response to local stress relaxation. The motion includes a transient component whose characteristic velocity decays exponentially with time following a mechanical perturbation of the nanoemulsions and a second component whose characteristic velocity is essentially independent of time. The steady-state characteristic velocity is surprisingly insensitive to the droplet volume fraction in the concentrated regime, indicating that the strain motion is only weakly dependent on the droplet-droplet interactions.

Non-viral ex vivo transduction of human hepatocyte cells to express factor VIII using a human ribosomal DNA-targeting vector

BACKGROUND

In gene therapy, one of the most important issues is the choice of the vectors. pHrneo is a human-derived vector previously constructed by our group, which can target a foreign gene into a human ribosomal DNA (hrDNA) locus.

METHODS AND RESULTS

In this study, we inserted an expression cassette of reconstructive hFVIII (hFVIII-BDDAK39) to pHrneo to construct a targeting vector: pHrneo-BDDAK39. Through electroporation of pHrneo-BDDAK39 into HL7702 cells (human hepatocyte), we identified the homologous recombinants using polymerase chain reaction, and tested the expression of hFVIII-BDDAK39 located at the hrDNA locus. The hFVIII-BDDAK39 was successfully targeted into the hrDNA locus of HL7702 by pHrneo-BDDAK39, and the efficiency of site-specific integration was 1.1 x 10(-5). The hFVIII-BDDAK39 at the hrDNA locus of HL7702 was found to be able to express efficiently (4.3 +/- 0.9 ng 10(-6) cells 24 h(-1)).

CONCLUSION

It has been indicated that the targeting vector pHrneo-BDDAK39 can be used in gene therapy for hemophilia A.

A laboratory based system for laue micro x-ray diffraction

A laboratory diffraction system capable of illuminating individual grains in a polycrystalline matrix is described. Using a microfocus x-ray source equipped with a tungsten anode and prefigured monocapillary optic, a micro-x-ray diffraction system with a 10 microm beam was developed. The beam profile generated by the ellipsoidal capillary was determined using the "knife edge" approach. Measurement of the capillary performance, indicated a beam divergence of 14 mrad and a useable energy bandpass from 5.5 to 19 keV. Utilizing the polychromatic nature of the incident x-ray beam and application of the Laue indexing software package X-Ray Micro-Diffraction Analysis Software, the orientation and deviatoric strain of single grains in a polycrystalline material can be studied. To highlight the system potential the grain orientation and strain distribution of individual grains in a polycrystalline magnesium alloy (Mg 0.2 wt % Nd) was mapped before and after tensile loading. A basal (0002) orientation was identified in the as-rolled annealed alloy; after tensile loading some grains were observed to undergo an orientation change of 30 degrees with respect to (0002). The applied uniaxial load was measured as an increase in the deviatoric tensile strain parallel to the load axis.

Microscopic dynamics of recovery in sheared depletion gels

We report x-ray photon correlation spectroscopy and diffusing wave spectroscopy studies of depletion gels formed from nanoscale silica colloids in solutions of nonabsorbing polymer following the cessation of shear. The two techniques provide a quantitatively coherent picture of the dynamics as ballistic or convective motion of colloidal clusters whose internal motion is arrested. While the dynamics possesses features characteristic of nonergodic soft solids, including a relaxation time that grows linearly with the time since shear, comparison with behavior of quenched supercooled liquids indicates that this evolution is not directly related to traditional aging phenomena in glasses.

Suppressive effect of elongation factor 2 on apoptosis induced by HIV-1 viral protein R

Rapid CD4+ lymphocyte depletion due to cell death caused by HIV infection is one of the hallmarks of acquired immunodeficiency syndrome. HIV-1 viral protein R (Vpr) induces apoptosis and is believed to contribute to CD4+ lymphocyte depletion. Thus, identification of cellular factors that potentially counteract this detrimental viral effect will not only help us to understand the molecular action of Vpr but also to design future antiviral therapies. In this report, we describe identification of elongation factor 2 (EF2) as such a cellular factor. Specifically, EF2 protein level is responsive to vpr gene expression; it is able to suppress Vpr-induced apoptosis when it is overproduced beyond its physiological level. EF2 was initially identified through a genome-wide multicopy suppressor search for Vpr-induced apoptosis in a fission yeast model system. Overproduction of fission yeast Ef2 completely abolishes Vpr-induced cell killing in fission yeast. Similarly, overexpression of the human homologue of yeast Ef2 in a neuroblastoma SKN-SH cell line and two CD4+ H9 and CEM-SS T-cell lines also blocked Vpr-induced apoptosis. The anti-apoptotic property of EF2 is demonstrated by its ability to suppress caspase 9 and caspase 3-mediated apoptosis induced by Vpr. In addition, it also reduces cytochrome c release induced by Vpr, staurosporine and TNFalpha. The fact that overproduction of EF2 blocks Vpr-induced cell death both in fission yeast and human cells, suggested that EF2 posses a highly conserved anti-apoptotic activity. Moreover, the responsive elevation of EF2 to Vpr suggests a possible host innate antiviral response.

Evolution of particle-scale dynamics in an aging clay suspension

Multispeckle x-ray photon correlation spectroscopy was employed to characterize the slow dynamics of a suspension of highly charged, nanometer-sized disks. At wave vectors q corresponding to interparticle length scales, the dynamic structure factor follows a form f(q,t) approximately exp([-(t/tau)(beta)], where beta approximately 1.5. The relaxation time tau increases with the sample age t(a) approximately as tau approximately t(1.8)(a) and decreases with q as tau approximately q(-1). Such behavior is consistent with models that describe the dynamics in disordered elastic media in terms of strain from random, local structural rearrangements. The measured amplitude of f(q,t) varies with q in a manner that implies caged particle motion. The decrease in the range of this motion and an increase in suspension conductivity with increasing t(a) indicate a growth in interparticle repulsion as the mechanism for internal stress development implied by these models.

Increased expression of Ca2+/calmodulin-dependent protein kinase II alpha during chronic morphine exposure

The chronic administration of morphine and related opioid drugs results in tolerance and dependence which limits the clinical utility of these agents. Neuronal plasticity is probably responsible in large part for tolerance and dependence. Ca(2+)/calmodulin-dependent protein kinase II (CaMKII) plays a crucial role in the neuroplastic events underlying memory formation and other phenomena. However, the role of this kinase in morphine tolerance remains unclear. To clarify this issue we explored mRNA and protein expression of CaMKIIalpha in spinal cord tissue from control and morphine treated mice using real-time polymerase chain reaction, Western blot analysis and confocal microscopy. Our chronic exposure paradigm involved the subcutaneous implantation of morphine pellets for 6 days prior to tissue analysis. The results indicate that the levels of CaMKIIalpha mRNA and protein were robustly increased in spinal cord tissue from morphine-treated mice. Confocal microscopy demonstrated that the increase in CaMKIIalpha expression was primarily localized to superficial laminae of the dorsal horn. In addition, the abundance of phosphorylated CaMKIIalpha was increased in spinal cord tissue from morphine-treated mice. We conclude that enhanced CaMKIIalpha expression and activity in spinal cord tissue may contribute to the development of morphine tolerance in mice. The involvement of this enzyme in opioid tolerance suggests other parallels may exist between the neuroplastic events related to memory formation and those related to opioid tolerance or pain.

Heme oxygenase type 2 modulates behavioral and molecular changes during chronic exposure to morphine

The heme oxygenase (HO) enzyme system has been shown to participate in nociceptive signaling in a number of different models of pain. In these experiments we investigated the role of the HO type 2 (HO-2) isozyme in tolerance to the analgesic effects of morphine, and the hyperalgesia and allodynia which are measurable upon cessation of administration. Wild type C57Bl/6 wild type mice or HO-2 null mutants in that background strain were treated with morphine for 5 days. The morphine administration protocol consisted of either twice daily repeated s.c. boluses of 15 mg/kg or s.c. implantation of a morphine pellet. At the end of the treatment period wild type mice treated by either protocol exhibited tolerance, but the HO-2 null mutants did not. The HO-2 null mutants also exhibited less mechanical allodynia following cessation of morphine administration, though only modest differences in thermal hyperalgesia were noted. There was no correlation between the degree of tolerance obtained in the bolus and pellet protocols and the degree of hyperalgesia and allodynia observed after cessation of morphine administration in the wild type mice. Our final experiments analyzed increases in expression of mRNA for nitric oxide synthase type 1, N-methyl-D-aspartate (NMDA) receptor NMDAR1 subunit and prodynorphin in spinal cord tissue. In pellet-treated mice two- to three-fold increases were observed in the abundance of these species, but very little change was observed in the null-mutant mice. Taken together our results indicate that HO-2 participates in the acquisition of opioid tolerance, the expression of mechanical allodynia after cessation of opioid administration and in gene regulation occurring in the setting of treatment with morphine. Furthermore, these studies suggest that the mechanisms underlying analgesic tolerance and opioid-induced hypersensitivity are at least somewhat distinct.

Serum levels of tumor necrosis factor-alpha (TNF-alpha), interleukin 6 (IL-6), and their soluble receptors in coal workers' pneumoconiosis

The aim of this study was to investigate whether systemic tumor necrosis factor alpha (TNF-alpha), soluble TNF-alpha receptors (p55, p75), interleukin 6 (IL-6), and soluble IL-6 receptor could be markers of biological activities of coal workers' pneumoconiosis (CWP). The study population was composed of 182 Chinese retired coal miners who had similar dust exposure histories. Among them, 71 were cases with CWP and 111 were controls. Chest radiographs were classified according to International Labour Organization Criteria (ILO, 1980). Individual dust exposure variables were estimated from work histories, and smoking information was obtained from interviews. Serum concentrations of TNF-alpha, TNF-alpha receptors (p55, p75), IL-6, and IL-6 receptor were measured by ELISA techniques. Mean serum levels of p55, p75 and IL-6 were significantly higher in cases than in controls (P < or = 0.01 for each comparison by crude analyses). Results from logistic regression models, adjusted for age, dust exposure variables, and smoking habits, found similar associations between soluble p55 and p75 levels and the presence of CWP. Linear regression analysis revealed that CWP radiographic stage (by ILO criteria) was significantly correlated with the individual serum concentrations of p55, p75 and IL-6. Serum concentrations of all measured cytokines were notcorrelated to age, dust exposure, or smoking, but there were correlations between soluble p75 and p55 levels, and between p75 and IL-6 levels. The results of this study suggest that serum levels of TNF receptors and IL-6 are associated with the fibrotic process of CWP and serum cytokine levels may be correlated with the severity of CWP.

[Tissue interaction with bioglass ceramic implanted in the rabbit cornea]

PURPOSE

To evaluate the biocompatibility and 'healing' of Bioglass Ceramic(BGC) in the cornea.

METHODS

BGC dicks (8 mm in diameter, 0.5 mm thick, 20-70 microns pore diameter, 37-62% porosity, 7.8 mm radius of curvature) were implanted in 11 New Zealand albino rabbits after a free-hand intralamellar dissection. The eyes were examined by slit-lamp biomicroscope up to seven months postoperatively. The corneas were removed at seven month (one eye at eight month), then were examined by light microscope.

RESULTS

Five of 11 dicks of BGC were extruded. All implant of BGC with 51-62% porosity were broken and then extruded. A large part of implants led to markedly edematous with severe degrees of corneal neovascularization within one month postoperatively. The corneal lamella before implants became not clear in all eyes after two months. Lipid deposits occurred in four eyes. It is difficulty to observe the 'healing' process of BGC in the cornea because the BGC is too hard to be cut in spite of being soft by 4% hydrochloric acid for four to ten days before cutting.

CONCLUSION

Our findings suggest that BGC with above parameters is not suitable as peripheral keratoprosthetic materials because of its rough, hard, thick and breakable.